6:26 p.m.
Hi,
I was following the instructions at http://www.ovirt.org/Node_PXE. My goal is to use
pxeboot (iPXE) to boot the node entirely into RAM with rootfs. What I got now is an
installation screen which requires a local storage. My system has no disk and this
doesn't quite work for me.
What's are the kernel parameters I need to use to boot the node into RAM
automatically? I am OK as the first step with a stateless node.
David
1:47 a.m.
Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb David Li:
Hi,
I was following the instructions at http://www.ovirt.org/Node_PXE. My goal is to use
pxeboot (iPXE) to boot the node entirely into RAM with rootfs. What I got now is an
installation screen which requires a local storage. My system has no disk and this
doesn't quite work for me.
What's are the kernel parameters I need to use to boot the node into RAM
automatically? I am OK as the first step with a stateless node.
Hey David,
the stateless mode is currently not completely working with oVirt
Engine. That means a Node needs to be approved each time it boots into
the stateless mode.
The stateless mode can be entered by appending stateless to the default
kernel arguments.
Greetings
fabian
10:57 a.m.
Hi Fabian,
That kernel option worked for me! The node is booted up in RAM. Thanks!
My next question is:
How do I specify the root login and passwd as boot parameters?
David
----- Original Message -----
From: Fabian Deutsch <fabiand(a)redhat.com>
To: David Li <david_li(a)sbcglobal.net>
Cc: "users(a)ovirt.org" <users(a)ovirt.org>
Sent: Thursday, October 24, 2013 11:47 PM
Subject: Re: [Users] How to pxeboot ovrit node into memory automatically?
Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb David Li:
> Hi,
>
> I was following the instructions at http://www.ovirt.org/Node_PXE. My goal
is to use pxeboot (iPXE) to boot the node entirely into RAM with rootfs. What I
got now is an installation screen which requires a local storage. My system has
no disk and this doesn't quite work for me.
>
> What's are the kernel parameters I need to use to boot the node into
RAM automatically? I am OK as the first step with a stateless node.
Hey David,
the stateless mode is currently not completely working with oVirt
Engine. That means a Node needs to be approved each time it boots into
the stateless mode.
The stateless mode can be entered by appending stateless to the default
kernel arguments.
Greetings
fabian
11:10 a.m.
Am Freitag, den 25.10.2013, 08:57 -0700 schrieb David Li:
Hi Fabian,
That kernel option worked for me! The node is booted up in RAM. Thanks!
My next question is:
How do I specify the root login and passwd as boot parameters?
Hey David.
Nice that it worked! Were you able to register to the Engine?
You can use the adminpw= and rootpw= kernel arguments to set passwords.
use
$ openssl passwd -salt 42
to create one or two passwords
Greetings
fabian
David
----- Original Message -----
> From: Fabian Deutsch <fabiand(a)redhat.com>
> To: David Li <david_li(a)sbcglobal.net>
> Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> Sent: Thursday, October 24, 2013 11:47 PM
> Subject: Re: [Users] How to pxeboot ovrit node into memory automatically?
>
> Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb David Li:
>> Hi,
>>
>> I was following the instructions at http://www.ovirt.org/Node_PXE. My goal
> is to use pxeboot (iPXE) to boot the node entirely into RAM with rootfs. What I
> got now is an installation screen which requires a local storage. My system has
> no disk and this doesn't quite work for me.
>>
>> What's are the kernel parameters I need to use to boot the node into
> RAM automatically? I am OK as the first step with a stateless node.
>
> Hey David,
>
> the stateless mode is currently not completely working with oVirt
> Engine. That means a Node needs to be approved each time it boots into
> the stateless mode.
> The stateless mode can be entered by appending stateless to the default
> kernel arguments.
>
> Greetings
> fabian
>
9:42 a.m.
Hi Fabian,
Yes rootpwd worked too! Thanks.
Two new problems:
But I found there is no networking for the stateless node.
What kernel boot options are used to either use DHCP or statically configure the IP
address for an interface on the node?
I also need to have the sshd enabled. Is there a kernel option for that?
David
----- Original Message -----
From: Fabian Deutsch <fabiand(a)redhat.com>
To: David Li <david_li(a)sbcglobal.net>
Cc: "users(a)ovirt.org" <users(a)ovirt.org>
Sent: Friday, October 25, 2013 9:10 AM
Subject: Re: [Users] How to pxeboot ovrit node into memory automatically?
Am Freitag, den 25.10.2013, 08:57 -0700 schrieb David Li:
> Hi Fabian,
>
> That kernel option worked for me! The node is booted up in RAM. Thanks!
>
> My next question is:
> How do I specify the root login and passwd as boot parameters?
Hey David.
Nice that it worked! Were you able to register to the Engine?
You can use the adminpw= and rootpw= kernel arguments to set passwords.
use
$ openssl passwd -salt 42
to create one or two passwords
Greetings
fabian
> David
>
>
>
>
> ----- Original Message -----
> > From: Fabian Deutsch <fabiand(a)redhat.com>
> > To: David Li <david_li(a)sbcglobal.net>
> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> > Sent: Thursday, October 24, 2013 11:47 PM
> > Subject: Re: [Users] How to pxeboot ovrit node into memory
automatically?
> >
> > Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb David Li:
> >> Hi,
> >>
> >> I was following the instructions at
http://www.ovirt.org/Node_PXE. My goal
> > is to use pxeboot (iPXE) to boot the node entirely into RAM with
rootfs. What I
> > got now is an installation screen which requires a local storage. My
system has
> > no disk and this doesn't quite work for me.
> >>
> >> What's are the kernel parameters I need to use to boot the
node into
> > RAM automatically? I am OK as the first step with a stateless node.
> >
> > Hey David,
> >
> > the stateless mode is currently not completely working with oVirt
> > Engine. That means a Node needs to be approved each time it boots into
> > the stateless mode.
> > The stateless mode can be entered by appending stateless to the
default
> > kernel arguments.
> >
> > Greetings
> > fabian
> >
9:45 a.m.
Am Montag, den 28.10.2013, 07:42 -0700 schrieb David Li:
Hi Fabian,
Yes rootpwd worked too! Thanks.
Two new problems:
But I found there is no networking for the stateless node.
What kernel boot options are used to either use DHCP or statically configure the IP
address for an interface on the node?
I also need to have the sshd enabled. Is there a kernel option for that?
Hey David,
here you can find all the supported boot params in ovirt node:
http://gerrit.ovirt.org/gitweb?p=ovirt-node.git;a=blob;f=scripts/ovirt-in...
Greetings
fabian
David
----- Original Message -----
> From: Fabian Deutsch <fabiand(a)redhat.com>
> To: David Li <david_li(a)sbcglobal.net>
> Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> Sent: Friday, October 25, 2013 9:10 AM
> Subject: Re: [Users] How to pxeboot ovrit node into memory automatically?
>
> Am Freitag, den 25.10.2013, 08:57 -0700 schrieb David Li:
>> Hi Fabian,
>>
>> That kernel option worked for me! The node is booted up in RAM. Thanks!
>>
>> My next question is:
>> How do I specify the root login and passwd as boot parameters?
>
> Hey David.
>
> Nice that it worked! Were you able to register to the Engine?
>
> You can use the adminpw= and rootpw= kernel arguments to set passwords.
> use
> $ openssl passwd -salt 42
> to create one or two passwords
>
> Greetings
> fabian
>
>> David
>>
>>
>>
>>
>> ----- Original Message -----
>> > From: Fabian Deutsch <fabiand(a)redhat.com>
>> > To: David Li <david_li(a)sbcglobal.net>
>> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
>> > Sent: Thursday, October 24, 2013 11:47 PM
>> > Subject: Re: [Users] How to pxeboot ovrit node into memory
> automatically?
>> >
>> > Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb David Li:
>> >> Hi,
>> >>
>> >> I was following the instructions at
> http://www.ovirt.org/Node_PXE. My goal
>> > is to use pxeboot (iPXE) to boot the node entirely into RAM with
> rootfs. What I
>> > got now is an installation screen which requires a local storage. My
> system has
>> > no disk and this doesn't quite work for me.
>> >>
>> >> What's are the kernel parameters I need to use to boot the
> node into
>> > RAM automatically? I am OK as the first step with a stateless node.
>> >
>> > Hey David,
>> >
>> > the stateless mode is currently not completely working with oVirt
>> > Engine. That means a Node needs to be approved each time it boots into
>> > the stateless mode.
>> > The stateless mode can be entered by appending stateless to the
> default
>> > kernel arguments.
>> >
>> > Greetings
>> > fabian
>> >
>
3:53 p.m.
Hi Fabian,
Everytime the ovirt node boots up, it adds a route entry that I have to manually remove.
Otherwise it messed up my routing.
How do I modify the boot scripts to automatically remove it?
----- Original Message -----
From: Fabian Deutsch <fabiand(a)redhat.com>
To: David Li <david_li(a)sbcglobal.net>
Cc: "users(a)ovirt.org" <users(a)ovirt.org>
Sent: Monday, October 28, 2013 7:45 AM
Subject: Re: [Users] How to pxeboot ovrit node into memory automatically?
Am Montag, den 28.10.2013, 07:42 -0700 schrieb David Li:
>
> Hi Fabian,
>
> Yes rootpwd worked too! Thanks.
>
> Two new problems:
>
> But I found there is no networking for the stateless node.
> What kernel boot options are used to either use DHCP or statically
configure the IP address for an interface on the node?
>
> I also need to have the sshd enabled. Is there a kernel option for that?
Hey David,
here you can find all the supported boot params in ovirt node:
http://gerrit.ovirt.org/gitweb?p=ovirt-node.git;a=blob;f=scripts/ovirt-in...
Greetings
fabian
> David
>
>
>
> ----- Original Message -----
> > From: Fabian Deutsch <fabiand(a)redhat.com>
> > To: David Li <david_li(a)sbcglobal.net>
> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> > Sent: Friday, October 25, 2013 9:10 AM
> > Subject: Re: [Users] How to pxeboot ovrit node into memory
automatically?
> >
> > Am Freitag, den 25.10.2013, 08:57 -0700 schrieb David Li:
> >> Hi Fabian,
> >>
> >> That kernel option worked for me! The node is booted up in RAM.
Thanks!
> >>
> >> My next question is:
> >> How do I specify the root login and passwd as boot parameters?
> >
> > Hey David.
> >
> > Nice that it worked! Were you able to register to the Engine?
> >
> > You can use the adminpw= and rootpw= kernel arguments to set
passwords.
> > use
> > $ openssl passwd -salt 42
> > to create one or two passwords
> >
> > Greetings
> > fabian
> >
> >> David
> >>
> >>
> >>
> >>
> >> ----- Original Message -----
> >> > From: Fabian Deutsch <fabiand(a)redhat.com>
> >> > To: David Li <david_li(a)sbcglobal.net>
> >> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> >> > Sent: Thursday, October 24, 2013 11:47 PM
> >> > Subject: Re: [Users] How to pxeboot ovrit node into memory
> > automatically?
> >> >
> >> > Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb David Li:
> >> >> Hi,
> >> >>
> >> >> I was following the instructions at
> > http://www.ovirt.org/Node_PXE. My goal
> >> > is to use pxeboot (iPXE) to boot the node entirely into RAM
with
> > rootfs. What I
> >> > got now is an installation screen which requires a local
storage. My
> > system has
> >> > no disk and this doesn't quite work for me.
> >> >>
> >> >> What's are the kernel parameters I need to use to
boot the
> > node into
> >> > RAM automatically? I am OK as the first step with a
stateless node.
> >> >
> >> > Hey David,
> >> >
> >> > the stateless mode is currently not completely working with
oVirt
> >> > Engine. That means a Node needs to be approved each time it
boots into
> >> > the stateless mode.
> >> > The stateless mode can be entered by appending stateless to
the
> > default
> >> > kernel arguments.
> >> >
> >> > Greetings
> >> > fabian
> >> >
> >
1:17 p.m.
Am Montag, den 02.12.2013, 13:53 -0800 schrieb David Li:
Hi Fabian,
Everytime the ovirt node boots up, it adds a route entry that I have to manually remove.
Otherwise it messed up my routing.
How do I modify the boot scripts to automatically remove it?
Hey David,
could you file a bug for that route problem?
You can try the following workaround:
# Create /etc/rc.d/rc.local with the commands to run
$ vi /etc/rc.d/rc.local
$ chmod a+x /etc/rc.d/rc.local
$ persist /etc/rc.d/rc.local
/etc/rc.d/rc.local should then be run on every boot.
- fabian
----- Original Message -----
> From: Fabian Deutsch <fabiand(a)redhat.com>
> To: David Li <david_li(a)sbcglobal.net>
> Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> Sent: Monday, October 28, 2013 7:45 AM
> Subject: Re: [Users] How to pxeboot ovrit node into memory automatically?
>
> Am Montag, den 28.10.2013, 07:42 -0700 schrieb David Li:
>>
>> Hi Fabian,
>>
>> Yes rootpwd worked too! Thanks.
>>
>> Two new problems:
>>
>> But I found there is no networking for the stateless node.
>> What kernel boot options are used to either use DHCP or statically
> configure the IP address for an interface on the node?
>>
>> I also need to have the sshd enabled. Is there a kernel option for that?
>
> Hey David,
>
> here you can find all the supported boot params in ovirt node:
>
http://gerrit.ovirt.org/gitweb?p=ovirt-node.git;a=blob;f=scripts/ovirt-in...
>
> Greetings
> fabian
>
>> David
>>
>>
>>
>> ----- Original Message -----
>> > From: Fabian Deutsch <fabiand(a)redhat.com>
>> > To: David Li <david_li(a)sbcglobal.net>
>> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
>> > Sent: Friday, October 25, 2013 9:10 AM
>> > Subject: Re: [Users] How to pxeboot ovrit node into memory
> automatically?
>> >
>> > Am Freitag, den 25.10.2013, 08:57 -0700 schrieb David Li:
>> >> Hi Fabian,
>> >>
>> >> That kernel option worked for me! The node is booted up in RAM.
> Thanks!
>> >>
>> >> My next question is:
>> >> How do I specify the root login and passwd as boot parameters?
>> >
>> > Hey David.
>> >
>> > Nice that it worked! Were you able to register to the Engine?
>> >
>> > You can use the adminpw= and rootpw= kernel arguments to set
> passwords.
>> > use
>> > $ openssl passwd -salt 42
>> > to create one or two passwords
>> >
>> > Greetings
>> > fabian
>> >
>> >> David
>> >>
>> >>
>> >>
>> >>
>> >> ----- Original Message -----
>> >> > From: Fabian Deutsch <fabiand(a)redhat.com>
>> >> > To: David Li <david_li(a)sbcglobal.net>
>> >> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
>> >> > Sent: Thursday, October 24, 2013 11:47 PM
>> >> > Subject: Re: [Users] How to pxeboot ovrit node into memory
>> > automatically?
>> >> >
>> >> > Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb David Li:
>> >> >> Hi,
>> >> >>
>> >> >> I was following the instructions at
>> > http://www.ovirt.org/Node_PXE. My goal
>> >> > is to use pxeboot (iPXE) to boot the node entirely into RAM
> with
>> > rootfs. What I
>> >> > got now is an installation screen which requires a local
> storage. My
>> > system has
>> >> > no disk and this doesn't quite work for me.
>> >> >>
>> >> >> What's are the kernel parameters I need to use to
> boot the
>> > node into
>> >> > RAM automatically? I am OK as the first step with a
> stateless node.
>> >> >
>> >> > Hey David,
>> >> >
>> >> > the stateless mode is currently not completely working with
> oVirt
>> >> > Engine. That means a Node needs to be approved each time it
> boots into
>> >> > the stateless mode.
>> >> > The stateless mode can be entered by appending stateless to
> the
>> > default
>> >> > kernel arguments.
>> >> >
>> >> > Greetings
>> >> > fabian
>> >> >
>> >
>
6:30 p.m.
Hi Fabian,
I think the bad route is a link local route 169.254.0.0/16. I am not quite sure if
it's a real bug but in my case I have to remove this route.
Also I am using ramdisk based node without a local disk. Can anything be persisted?
David
----- Original Message -----
From: Fabian Deutsch <fabiand(a)redhat.com>
To: David Li <david_li(a)sbcglobal.net>
Cc: "users(a)ovirt.org" <users(a)ovirt.org>
Sent: Wednesday, December 4, 2013 11:17 AM
Subject: Re: [Users] How to pxeboot ovrit node into memory automatically?
Am Montag, den 02.12.2013, 13:53 -0800 schrieb David Li:
> Hi Fabian,
>
> Everytime the ovirt node boots up, it adds a route entry that I have to
manually remove. Otherwise it messed up my routing.
> How do I modify the boot scripts to automatically remove it?
Hey David,
could you file a bug for that route problem?
You can try the following workaround:
# Create /etc/rc.d/rc.local with the commands to run
$ vi /etc/rc.d/rc.local
$ chmod a+x /etc/rc.d/rc.local
$ persist /etc/rc.d/rc.local
/etc/rc.d/rc.local should then be run on every boot.
- fabian
> ----- Original Message -----
> > From: Fabian Deutsch <fabiand(a)redhat.com>
> > To: David Li <david_li(a)sbcglobal.net>
> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> > Sent: Monday, October 28, 2013 7:45 AM
> > Subject: Re: [Users] How to pxeboot ovrit node into memory
automatically?
> >
> > Am Montag, den 28.10.2013, 07:42 -0700 schrieb David Li:
> >>
> >> Hi Fabian,
> >>
> >> Yes rootpwd worked too! Thanks.
> >>
> >> Two new problems:
> >>
> >> But I found there is no networking for the stateless node.
> >> What kernel boot options are used to either use DHCP or
statically
> > configure the IP address for an interface on the node?
> >>
> >> I also need to have the sshd enabled. Is there a kernel option
for that?
> >
> > Hey David,
> >
> > here you can find all the supported boot params in ovirt node:
> >
http://gerrit.ovirt.org/gitweb?p=ovirt-node.git;a=blob;f=scripts/ovirt-in...
> >
> > Greetings
> > fabian
> >
> >> David
> >>
> >>
> >>
> >> ----- Original Message -----
> >> > From: Fabian Deutsch <fabiand(a)redhat.com>
> >> > To: David Li <david_li(a)sbcglobal.net>
> >> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> >> > Sent: Friday, October 25, 2013 9:10 AM
> >> > Subject: Re: [Users] How to pxeboot ovrit node into memory
> > automatically?
> >> >
> >> > Am Freitag, den 25.10.2013, 08:57 -0700 schrieb David Li:
> >> >> Hi Fabian,
> >> >>
> >> >> That kernel option worked for me! The node is booted
up in RAM.
> > Thanks!
> >> >>
> >> >> My next question is:
> >> >> How do I specify the root login and passwd as boot
parameters?
> >> >
> >> > Hey David.
> >> >
> >> > Nice that it worked! Were you able to register to the
Engine?
> >> >
> >> > You can use the adminpw= and rootpw= kernel arguments to set
> > passwords.
> >> > use
> >> > $ openssl passwd -salt 42
> >> > to create one or two passwords
> >> >
> >> > Greetings
> >> > fabian
> >> >
> >> >> David
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> ----- Original Message -----
> >> >> > From: Fabian Deutsch <fabiand(a)redhat.com>
> >> >> > To: David Li <david_li(a)sbcglobal.net>
> >> >> > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> >> >> > Sent: Thursday, October 24, 2013 11:47 PM
> >> >> > Subject: Re: [Users] How to pxeboot ovrit node
into memory
> >> > automatically?
> >> >> >
> >> >> > Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb
David Li:
> >> >> >> Hi,
> >> >> >>
> >> >> >> I was following the instructions at
> >> > http://www.ovirt.org/Node_PXE. My goal
> >> >> > is to use pxeboot (iPXE) to boot the node entirely
into RAM
> > with
> >> > rootfs. What I
> >> >> > got now is an installation screen which requires a
local
> > storage. My
> >> > system has
> >> >> > no disk and this doesn't quite work for me.
> >> >> >>
> >> >> >> What's are the kernel parameters I need
to use to
> > boot the
> >> > node into
> >> >> > RAM automatically? I am OK as the first step with
a
> > stateless node.
> >> >> >
> >> >> > Hey David,
> >> >> >
> >> >> > the stateless mode is currently not completely
working with
> > oVirt
> >> >> > Engine. That means a Node needs to be approved
each time it
> > boots into
> >> >> > the stateless mode.
> >> >> > The stateless mode can be entered by appending
stateless to
> > the
> >> > default
> >> >> > kernel arguments.
> >> >> >
> >> >> > Greetings
> >> >> > fabian
> >> >> >
> >> >
> >
1:47 a.m.
--=-R7WkZuHQymWmUdpI8NHg
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb David Li:
Hi Fabian,
=20
I think the bad route is a link local route 169.254.0.0/16. I am not quit=
e sure
if it's a real bug but in my case I have to remove this route.
Also I am using ramdisk based node without a local disk. Can anything
be =
persisted?=20
Hey David,
when you refer to stateless mode, then no, nothing can be persisted.
Regarding the bug - Please provide the whole cmdline you are using to
boot the node, to give me a chance to reproduce it.
- fabian
David
=20
=20
=20
----- Original Message -----
> From: Fabian Deutsch <fabiand(a)redhat.com>
> To: David Li <david_li(a)sbcglobal.net>
> Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> Sent: Wednesday, December 4, 2013 11:17 AM
> Subject: Re: [Users] How to pxeboot ovrit node into memory automaticall=
y?
>=20
> Am Montag, den 02.12.2013, 13:53 -0800 schrieb David Li:
>> Hi Fabian,
>>=20
>> Everytime the ovirt node boots up, it adds a route entry that I have =
to=20
> manually remove. Otherwise it messed up my routing.=20
>> How do I modify the boot scripts to automatically remove it?
>=20
> Hey David,
>=20
> could you file a bug for that route problem?
>=20
> You can try the following workaround:
>=20
> # Create /etc/rc.d/rc.local with the commands to run
> $ vi /etc/rc.d/rc.local
> $ chmod a+x /etc/rc.d/rc.local
> $ persist /etc/rc.d/rc.local
>=20
> /etc/rc.d/rc.local should then be run on every boot.
>=20
> - fabian
>=20
>> ----- Original Message -----
>> > From: Fabian Deutsch <fabiand(a)redhat.com>
>> > To: David Li <david_li(a)sbcglobal.net>
>> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
>> > Sent: Monday, October 28, 2013 7:45 AM
>> > Subject: Re: [Users] How to pxeboot ovrit node into memory=20
> automatically?
>> >=20
>> > Am Montag, den 28.10.2013, 07:42 -0700 schrieb David Li:
>> >>=20
>> >> Hi Fabian,
>> >>=20
>> >> Yes rootpwd worked too! Thanks.
>> >>=20
>> >> Two new problems:
>> >>=20
>> >> But I found there is no networking for the stateless node.
>> >> What kernel boot options are used to either use DHCP or=20
> statically=20
>> > configure the IP address for an interface on the node?
>> >>=20
>> >> I also need to have the sshd enabled. Is there a kernel option=
=20
> for that?
>> >=20
>> > Hey David,
>> >=20
>> > here you can find all the supported boot params in ovirt node:
>> >=20
> http://gerrit.ovirt.org/gitweb?p=3Dovirt-node.git;a=3Dblob;f=3Dscripts/=
ovirt-init-functions.sh.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7f3039733;hb=
=3DHEAD#l214
>> >=20
>> > Greetings
>> > fabian
>> >=20
>> >> David
>> >>=20
>> >>=20
>> >>=20
>> >> ----- Original Message -----
>> >> > From: Fabian Deutsch <fabiand(a)redhat.com>
>> >> > To: David Li <david_li(a)sbcglobal.net>
>> >> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
>> >> > Sent: Friday, October 25, 2013 9:10 AM
>> >> > Subject: Re: [Users] How to pxeboot ovrit node into memory=20
>> > automatically?
>> >> >=20
>> >> > Am Freitag, den 25.10.2013, 08:57 -0700 schrieb David Li:
>> >> >> Hi Fabian,
>> >> >>=20
>> >> >> That kernel option worked for me! The node is booted=20
> up in RAM.=20
>> > Thanks!
>> >> >>=20
>> >> >> My next question is:
>> >> >> How do I specify the root login and passwd as boot=20
> parameters?=20
>> >> >=20
>> >> > Hey David.
>> >> >=20
>> >> > Nice that it worked! Were you able to register to the=20
> Engine?
>> >> >=20
>> >> > You can use the adminpw=3D and rootpw=3D kernel arguments to se=
t=20
>=20
>> > passwords.
>> >> > use
>> >> > $ openssl passwd -salt 42
>> >> > to create one or two passwords
>> >> >=20
>> >> > Greetings
>> >> > fabian
>> >> >=20
>> >> >> David
>> >> >>=20
>> >> >>=20
>> >> >>=20
>> >> >>=20
>> >> >> ----- Original Message -----
>> >> >> > From: Fabian Deutsch <fabiand(a)redhat.com>
>> >> >> > To: David Li <david_li(a)sbcglobal.net>
>> >> >> > Cc: "users(a)ovirt.org"=20
> <users(a)ovirt.org>
>> >> >> > Sent: Thursday, October 24, 2013 11:47 PM
>> >> >> > Subject: Re: [Users] How to pxeboot ovrit node=20
> into memory=20
>> >> > automatically?
>> >> >> >=20
>> >> >> > Am Donnerstag, den 24.10.2013, 16:26 -0700 schrieb=20
> David Li:
>> >> >> >> Hi,
>> >> >> >>=20
>> >> >> >> I was following the instructions at=20
>> >> > http://www.ovirt.org/Node_PXE. My goal=20
>> >> >> > is to use pxeboot (iPXE) to boot the node entirely=20
> into RAM=20
>> > with=20
>> >> > rootfs. What I=20
>> >> >> > got now is an installation screen which requires a=20
> local=20
>> > storage. My=20
>> >> > system has=20
>> >> >> > no disk and this doesn't quite work for me.=20
>> >> >> >>=20
>> >> >> >> What's are the kernel parameters I need=20
> to use to=20
>> > boot the=20
>> >> > node into=20
>> >> >> > RAM automatically? I am OK as the first step with=20
> a=20
>> > stateless node.=20
>> >> >> >=20
>> >> >> > Hey David,
>> >> >> >=20
>> >> >> > the stateless mode is currently not completely=20
> working with=20
>> > oVirt
>> >> >> > Engine. That means a Node needs to be approved=20
> each time it=20
>> > boots into
>> >> >> > the stateless mode.
>> >> >> > The stateless mode can be entered by appending=20
> stateless to=20
>> > the=20
>> >> > default
>> >> >> > kernel arguments.
>> >> >> >=20
>> >> >> > Greetings
>> >> >> > fabian
>> >> >> >=20
>> >> >=20
>> >=20
>=20
--=-R7WkZuHQymWmUdpI8NHg
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=4YuX
-----END PGP SIGNATURE-----
--=-R7WkZuHQymWmUdpI8NHg--
6 p.m.
--431184223-617318750-1386720001=:4918
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Hi Fabian,=0A=0ADoes the stateless ovirt node have the VDSM built-in?=A0=0A=
=0ADavid=0A=0A=0A=0A>________________________________=0A> From: Fabian Deut=
sch <fabiand(a)redhat.com>=0A>To: David Li <david_li(a)sbcglobal.net>
=0A>Cc: "=
users(a)ovirt.org" <users(a)ovirt.org> =0A>Sent: Thursday, December 5, 2013
11:=
47 PM=0A>Subject: Re: [Users] How to pxeboot ovrit node into memory automat=
ically?=0A> =0A>=0A>Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb Davi=
d Li:=0A>> Hi Fabian,=0A>> =0A>> I think the bad route is a link local
rout=
e 169.254.0.0/16. I am not quite sure if it's a real bug but in my case I h=
ave to remove this route.=0A>> Also I am using ramdisk based node without a=
local disk. Can anything be persisted? =0A>=0A>Hey David,=0A>=0A>when you =
refer to stateless mode, then no, nothing can be persisted.=0A>Regarding th=
e bug - Please provide the whole cmdline you are using to=0A>boot the node,=
to give me a chance to reproduce it.=0A>=0A>- fabian=0A>=0A>>
David=0A>> =
=0A>> =0A>> =0A>> ----- Original Message -----=0A>> > From:
Fabian Deutsch =
<fabiand(a)redhat.com>=0A>> > To: David Li
<david_li(a)sbcglobal.net>=0A>> > Cc=
: "users(a)ovirt.org" <users(a)ovirt.org>=0A>> > Sent: Wednesday,
December 4, 2=
013 11:17 AM=0A>> > Subject: Re: [Users] How to pxeboot ovrit node into mem=
ory automatically?=0A>> > =0A>> > Am Montag, den 02.12.2013, 13:53 -0800
sc=
hrieb David Li:=0A>> >>=A0 Hi Fabian,=0A>> >> =0A>>
>>=A0 Everytime the ovi=
rt node boots up, it adds a route entry that I have to =0A>> > manually rem=
ove. Otherwise it messed up my routing. =0A>> >>=A0 How do I modify the bo=
ot scripts to automatically remove it?=0A>> > =0A>> > Hey
David,=0A>> > =0A=
> > could you file a bug for that route problem?=0A>> >
=0A>> > You can tr=
y the following workaround:=0A>> > =0A>>
> # Create /etc/rc.d/rc.local with=
the commands to run=0A>> > $ vi /etc/rc.d/rc.local=0A>> > $ chmod a+x
/etc=
/rc.d/rc.local=0A>> > $ persist /etc/rc.d/rc.local=0A>> > =0A>>
> /etc/rc.d=
/rc.local should then be run on every boot.=0A>> > =0A>> > -
fabian=0A>> > =
=0A>> >>=A0 ----- Original Message -----=0A>> >>=A0 > From:
Fabian Deutsch =
<fabiand(a)redhat.com>=0A>> >>=A0 > To: David Li
<david_li(a)sbcglobal.net>=0A>=
>>=A0 > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>=0A>> >>=A0 > Sent: Monday=
, October 28, 2013
7:45 AM=0A>> >>=A0 > Subject: Re: [Users] How to pxeboot=
ovrit node into memory =0A>> > automatically?=0A>> >>=A0 >
=0A>> >>=A0 > A=
m Montag, den 28.10.2013, 07:42 -0700 schrieb David Li:=0A>> >>=A0 >>
=0A>>=
>=A0 >>=A0 Hi Fabian,=0A>> >>=A0 >>
=0A>> >>=A0 >>=A0 Yes rootpwd worked =
too! Thanks.=0A>>
>>=A0 >> =0A>> >>=A0 >>=A0 Two new problems:=0A>>
>>=A0 >=
=0A>> >>=A0 >>=A0 But I found there is no
networking for the stateless no=
de.=0A>> >>=A0 >>=A0 What kernel
boot options are used to either use DHCP=
=A0 or =0A>> > statically =0A>> >>=A0 > configure the IP address
for an int=
erface on the node?=0A>> >>=A0 >> =0A>> >>=A0 >>=A0 I
also need to have the=
sshd enabled. Is there a kernel option =0A>> > for that?=0A>> >>=A0
> =0A>=
>>=A0 > Hey David,=0A>> >>=A0 > =0A>>
>>=A0 > here you can find all the s=
upported boot params in ovirt
node:=0A>> >>=A0 > =0A>> > http://gerrit.ovir=
t.org/gitweb?p=3Dovirt-node.git;a=3Dblob;f=3Dscripts/ovirt-init-functions.s=
h.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7f3039733;hb=3DHEAD#l214=0A>> >>=A0=
=0A>> >>=A0 > Greetings=0A>> >>=A0 >
fabian=0A>> >>=A0 > =0A>> >>=A0 >>=
=A0
David=0A>> >>=A0 >> =0A>> >>=A0 >> =0A>>
>>=A0 >> =0A>> >>=A0 >>=A0 ---=
-- Original Message -----=0A>> >>=A0 >>=A0 > From: Fabian Deutsch
<fabiand@=
redhat.com>=0A>> >>=A0 >>=A0 > To: David Li
<david_li(a)sbcglobal.net>=0A>> >=
=A0 >>=A0 > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>=0A>> >>=A0 >>=A0 > Sen=
t: Friday,
October 25, 2013 9:10 AM=0A>> >>=A0 >>=A0 > Subject: Re: [Users]=
How to pxeboot ovrit node into memory =0A>> >>=A0 >
automatically?=0A>> >>=
=A0 >>=A0 > =0A>> >>=A0 >>=A0 > Am Freitag, den 25.10.2013,
08:57 -0700 sch=
rieb David Li:=0A>> >>=A0 >>=A0 >>=A0 Hi Fabian,=0A>>
>>=A0 >>=A0 >> =0A>> =
>=A0 >>=A0 >>=A0 That kernel option worked for me!=A0
The node is booted =
=0A>> > up in RAM. =0A>> >>=A0 >
Thanks!=0A>> >>=A0 >>=A0 >> =0A>> >>=A0 >>=
=A0 >>=A0 My next question is:=0A>> >>=A0 >>=A0 >> How do I
specify the roo=
t login and passwd as boot =0A>> > parameters? =0A>> >>=A0
>>=A0 > =0A>> >>=
=A0 >>=A0 > Hey David.=0A>> >>=A0 >>=A0 > =0A>>
>>=A0 >>=A0 > Nice that it =
worked! Were you able to register to the =0A>> > Engine?=0A>> >>=A0
>>=A0 >=
=0A>> >>=A0 >>=A0 > You can use the adminpw=3D and rootpw=3D kernel
argume=
nts to set =0A>> > =0A>> >>=A0 > passwords.=0A>> >>=A0
>>=A0 > use=0A>> >>=
=A0 >>=A0 > $ openssl passwd -salt 42=0A>> >>=A0 >>=A0 > to
create one or t=
wo passwords=0A>> >>=A0 >>=A0 > =0A>> >>=A0 >>=A0
> Greetings=0A>> >>=A0 >>=
=A0 > fabian=0A>> >>=A0 >>=A0 > =0A>> >>=A0
>>=A0 >>=A0 David=0A>> >>=A0 >>=
=A0 >> =0A>> >>=A0 >>=A0 >> =0A>> >>=A0
>>=A0 >> =0A>> >>=A0 >>=A0 >> =0A>>=
>=A0 >>=A0 >>=A0 ----- Original Message
-----=0A>> >>=A0 >>=A0 >>=A0 > Fr=
om: Fabian Deutsch
<fabiand(a)redhat.com>=0A>> >>=A0 >>=A0 >>=A0 > To: David
=
Li <david_li(a)sbcglobal.net>=0A>> >>=A0 >>=A0 >>=A0 > Cc:
"users(a)ovirt.org" =
=0A>> > <users(a)ovirt.org>=0A>> >>=A0 >>=A0 >>=A0
> Sent: Thursday, October =
24, 2013 11:47 PM=0A>> >>=A0 >>=A0 >>=A0 > Subject: Re: [Users]
How to pxeb=
oot ovrit node =0A>> > into memory =0A>> >>=A0 >>=A0 >
automatically?=0A>> =
>=A0 >>=A0 >>=A0 > =0A>> >>=A0
>>=A0 >>=A0 > Am Donnerstag, den 24.10.2013=
, 16:26 -0700 schrieb
=0A>> > David Li:=0A>> >>=A0 >>=A0 >>=A0 >>=A0
Hi,=0A=
> >>=A0 >>=A0 >>=A0 >> =0A>>
>>=A0 >>=A0 >>=A0 >>=A0 I was following the i=
nstructions
at =0A>> >>=A0 >>=A0 > http://www.ovirt.org/Node_PXE. My goal =
=0A>> >>=A0 >>=A0 >>=A0 > is to use pxeboot (iPXE) to boot the
node entirel=
y =0A>> > into RAM =0A>> >>=A0 > with =0A>> >>=A0
>>=A0 > rootfs. What I =
=0A>> >>=A0 >>=A0 >>=A0 > got now is an installation screen
which requires =
a =0A>> > local =0A>> >>=A0 > storage. My =0A>> >>=A0
>>=A0 > system has =
=0A>> >>=A0 >>=A0 >>=A0 > no disk and this doesn't quite
work for me. =0A>>=
>=A0 >>=A0 >>=A0 >> =0A>> >>=A0
>>=A0 >>=A0 >>=A0 What's are the kernel p=
arameters I need
=0A>> > to use to =0A>> >>=A0 > boot the =0A>> >>=A0
>>=A0=
node into =0A>> >>=A0 >>=A0 >>=A0 > RAM
automatically?=A0 I am OK as the=
first step with =0A>> > a =0A>>
>>=A0 > stateless node. =0A>> >>=A0 >>=A0 =
>=A0 > =0A>> >>=A0 >>=A0 >>=A0 > Hey
David,=0A>> >>=A0 >>=A0 >>=A0 > =0A>>=
>=A0 >>=A0 >>=A0 > the stateless mode is currently not completely
=0A>> >=
working with =0A>> >>=A0 > oVirt=0A>>
>>=A0 >>=A0 >>=A0 > Engine. That mea=
ns a Node needs to be approved =0A>> > each time it =0A>> >>=A0 >
boots int=
o=0A>> >>=A0 >>=A0 >>=A0 > the stateless mode.=0A>>
>>=A0 >>=A0 >>=A0 > The=
stateless mode can be entered by appending =0A>> > stateless to =0A>>
>>=
=A0 > the =0A>> >>=A0 >>=A0 > default=0A>> >>=A0
>>=A0 >>=A0 > kernel argum=
ents.=0A>> >>=A0 >>=A0 >>=A0 > =0A>> >>=A0
>>=A0 >>=A0 > Greetings=0A>> >>=
=A0 >>=A0 >>=A0 > fabian=0A>> >>=A0 >>=A0 >>=A0
> =0A>> >>=A0 >>=A0 > =0A>>=
>=A0 > =0A>> > =0A>=0A>=0A>=0A>
--431184223-617318750-1386720001=:4918
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"color:#000; background-color:#fff;
font-family:ti=
mes new roman, new york, times, serif;font-size:12pt"><div><span>Hi
Fabian,=
</span></div><div style=3D"color: rgb(0, 0, 0); font-size: 16px;
font-famil=
y: 'times new roman', 'new york', times, serif; background-color:
transpare=
nt; font-style: normal;"><span><br></span></div><div
style=3D"color: rgb(0,=
0, 0); font-size: 16px; font-family: 'times new roman', 'new york',
times,=
serif; background-color: transparent; font-style: normal;">Does the statel=
ess ovirt node have the VDSM built-in? </div><div style=3D"color:
rgb(=
0, 0, 0); font-size: 16px; font-family: 'times new roman', 'new york',
time=
s, serif; background-color: transparent; font-style:
normal;"><br></div><di=
v style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: 'times new ro=
man', 'new york', times, serif; background-color: transparent; font-style: =
normal;">David</div><div><br><blockquote
style=3D"border-left: 2px solid rg=
b(16,
16, 255); margin-left: 5px; margin-top: 5px; padding-left: 5px;"> <div st=
yle=3D"font-family: 'times new roman', 'new york', times, serif;
font-size:=
12pt;"> <div style=3D"font-family: 'times new roman', 'new
york', times, s=
erif; font-size: 12pt;"> <div dir=3D"ltr"> <hr
size=3D"1"> <font size=3D"2=
" face=3D"Arial"> <b><span
style=3D"font-weight:bold;">From:</span></b> Fab=
ian Deutsch &lt;fabiand(a)redhat.com&gt;<br> <b><span
style=3D"font-weight: b=
old;">To:</span></b> David Li &lt;david_li(a)sbcglobal.net&gt;
<br><b><span s=
tyle=3D"font-weight: bold;">Cc:</span></b>
"users(a)ovirt.org" <users@ovir=
t.org> <br> <b><span style=3D"font-weight:
bold;">Sent:</span></b> Thurs=
day, December 5, 2013 11:47 PM<br> <b><span style=3D"font-weight:
bold;">Su=
bject:</span></b> Re: [Users] How to pxeboot ovrit node into memory automat=
ically?<br> </font> </div> <div
class=3D"y_msg_container"><br>=0AAm Donners=
tag, den 05.12.2013, 16:30 -0800 schrieb David Li:<br>> Hi
Fabian,<br>&g=
t; <br>> I think the bad route is a link local route 169.254.0.0/16. I a=
m not quite sure if it's a real bug but in my case I have to remove this ro=
ute.<br>> Also I am using ramdisk based node without a local disk. Can a=
nything be persisted? <br><br>Hey David,<br><br>when you refer to
stateless=
mode, then no, nothing can be persisted.<br>Regarding the bug - Please pro=
vide the whole cmdline you are using to<br>boot the node, to give me a chan=
ce to reproduce it.<br><br>- fabian<br><br>>
David<br>> <br>> <br>=
> <br>> ----- Original Message -----<br>> > From:
Fabian Deutsc=
h <<a ymailto=3D"mailto:fabiand@redhat.com"
href=3D"mailto:fabiand@redha=
t.com">fabiand(a)redhat.com</a>&gt;<br>&gt; > To: David
Li <<a ymailto=
=3D"mailto:david_li@sbcglobal.net"
href=3D"mailto:david_li@sbcglobal.net">d=
avid_li(a)sbcglobal.net</a>&gt;<br>&gt; > Cc: "<a
ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@o=
virt.org</a>" <<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:user=
s@ovirt.org">users(a)ovirt.org</a>&gt;<br>&gt; > Sent:
Wednesday, December=
4, 2013 11:17 AM<br>> > Subject: Re: [Users] How to pxeboot ovrit
no=
de into memory automatically?<br>> > <br>> > Am
Montag, den 02.=
12.2013, 13:53 -0800 schrieb David Li:<br>> >> Hi
Fabian,<br=
> >> <br>>
>> Everytime the ovirt node boots up, i=
t adds a route
entry that I have to <br>> > manually remove. Otherwis=
e it messed up my routing. <br>> >> How do I modify
the boo=
t scripts to automatically remove it?<br>> > <br>>
> Hey David,=
<br>> > <br>> > could you file a bug for that
route problem?<br=
> > <br>> > You can try the
following workaround:<br>> >=
<br>> > #
Create /etc/rc.d/rc.local with the commands to run<br>>
> $ vi /etc/rc.d/rc.local<br>> > $ chmod a+x
/etc/rc.d/rc.local<b=
r>> > $ persist /etc/rc.d/rc.local<br>> >
<br>> > /etc/rc=
.d/rc.local should then be run on every boot.<br>> >
<br>> > - =
fabian<br>> > <br>> >> -----
Original Message -----<br=
> >> > From: Fabian Deutsch
<<a ymailto=3D"mailto:fab=
iand(a)redhat.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat.com</a>&=
gt;<br>> >> > To: David Li <<a
ymailto=3D"mailto:david=
_li(a)sbcglobal.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcgloba=
l.net</a>><br>> >> > Cc:
"<a ymailto=3D"mailto:users@o=
virt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.org</a>" <<a
ymail=
to=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.o=
rg</a>><br>> >> > Sent: Monday,
October 28, 2013 7:45 =
AM<br>> >> > Subject: Re: [Users] How to
pxeboot ovrit no=
de into
memory <br>> > automatically?<br>>
>> > <br>> &=
gt;> > Am Montag, den 28.10.2013, 07:42 -0700 schrieb David Li:=
<br>> >> >> <br>>
>> >> Hi =
Fabian,<br>> >> >> <br>>
>> >>&nb=
sp; Yes rootpwd worked too! Thanks.<br>> >>
>> <br>>=
; >> >> Two new
problems:<br>> >> &g=
t;> <br>> >> >> But I
found there is no netwo=
rking for the stateless node.<br>> >>
>> What ke=
rnel boot options are used to either use DHCP or <br>> >
static=
ally <br>> >> > configure the IP address for
an interface=
on the node?<br>> >> >>
<br>> >> >&=
gt; I also need to have the sshd enabled. Is there a kernel option <b=
r>> > for that?<br>> >> >
<br>>
>> > Hey David,<br>>
>> > <br>> >&g=
t; > here you can find all the supported boot params in ovirt node=
:<br>> >> > <br>> >
http://gerrit.ovirt.org/gitweb?=
p=3Dovirt-node.git;a=3Dblob;f=3Dscripts/ovirt-init-functions.sh.in;h=3Dc428=
0caefb89c77afc1e8bec8c925aa7f3039733;hb=3DHEAD#l214<br>>
>> =
> <br>> >> >
Greetings<br>> >> > fab=
ian<br>> >> > <br>>
>> >> Davi=
d<br>> >> >> <br>>
>> >> <br>>=
>> >> <br>> >>
>> ----- Origi=
nal Message -----<br>> >> >>
> From: Fabian D=
eutsch <<a ymailto=3D"mailto:fabiand@redhat.com"
href=3D"mailto:fabiand@=
redhat.com">fabiand(a)redhat.com</a>&gt;<br>&gt;
>> >> =
; > To: David Li <<a ymailto=3D"mailto:david_li@sbcglobal.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><br>&=
gt; >> >> > Cc: "<a
ymailto=3D"mailto:users@ovir=
t.org" href=3D"mailto:users@ovirt.org">users@ovirt.org</a>"
<<a ymailto=
=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.org=
</a>><br>> >> >>
> Sent: Friday, October 2=
5, 2013 9:10 AM<br>> >> >>
> Subject: Re: [Us=
ers] How to pxeboot ovrit node into memory <br>> >>
> aut=
omatically?<br>> >> >>
> <br>> >>&nb=
sp; >> > Am Freitag, den 25.10.2013, 08:57 -0700 schrieb
Dav=
id Li:<br>> >> >>
>> Hi Fabian,<br>&=
gt; >> >> >>
<br>> >> >>=
>> That kernel option worked for me! The node
is b=
ooted <br>> > up in RAM. <br>> >>
> Thanks!<br>>
>> >> >> <br>>
>> >>&nb=
sp; >> My next question is:<br>>
>> >>&nbs=
p; >> How do I specify the root login and passwd as boot <br>>
>=
; parameters? <br>> >> >>
> <br>> >>=
>> > Hey David.<br>>
>> >> =
> <br>> >> >>
> Nice that it worked! Were=
you able to register to the <br>> > Engine?<br>>
>> &=
gt;> > <br>> >>
>> > You can use =
the adminpw=3D and rootpw=3D kernel arguments to set <br>> >
<br>>=
>> > passwords.<br>>
>> >> > =
use<br>> >> >> > $
openssl passwd -salt 42<br=
> >> >>
> to create one or two passwords<br>=
>
>> >> > <br>>
>>
>> > Greetings<br>>
>> >> > f=
abian<br>> >> >> >
<br>> >> &g=
t;> >> David<br>>
>> >> >=
;> <br>> >> >>
>> <br>> >>&nbs=
p; >> >> <br>>
>> >> >> =
<br>> >> >>
>> ----- Original Messag=
e -----<br>> >> >>
>> > From: Fab=
ian Deutsch <<a ymailto=3D"mailto:fabiand@redhat.com"
href=3D"mailto:fab=
iand@redhat.com">fabiand(a)redhat.com</a>&gt;<br>&gt;
>> >>=
>> > To: David Li <<a
ymailto=3D"mailto:david_li@s=
bcglobal.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net=
</a>><br>> >> >>
>> > Cc: "<a =
ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.org</a>"
<br>> > <<a =
ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ov=
irt.org</a>><br>> >>
>> >> > S=
ent: Thursday, October 24, 2013 11:47 PM<br>> >>
>>&nb=
sp; >> > Subject: Re: [Users] How to pxeboot ovrit node
<br>=
> > into memory <br>> >>
>> > automatic=
ally?<br>> >> >>
>> > <br>> &g=
t;> >> >> > Am
Donnerstag, den 24.10.20=
13, 16:26 -0700 schrieb <br>> > David Li:<br>>
>> >=
> >> >>
Hi,<br>> >> >>=
; >> >> <br>>
>> >> >=
> >> I was following the instructions at
<br>> >=
> >> > <a
href=3D"http://www.ovirt.org/Node_PXE"
target=3D"_blank">http://www.ovirt.org/Node_PXE</a>;. My goal
<br>> >=
> >> >> > is to
use pxeboot (iPXE) to b=
oot the node entirely <br>> > into RAM <br>>
>> > w=
ith <br>> >> >> >
rootfs. What I <br>> >=
;> >> >> > got now
is an installation s=
creen which requires a <br>> > local <br>>
>> > sto=
rage. My <br>> >> >> >
system has <br>> &g=
t;> >> >> > no
disk and this doesn't qu=
ite work for me. <br>> >> >>
>> >=
> <br>> >> >>
>> >> W=
hat's are the kernel parameters I need <br>> > to use to
<br>> >=
;> > boot the <br>> >>
>> > node =
into <br>> >> >>
>> > RAM
automatically? I am OK as the first step with <br>> > a
<br>&g=
t; >> > stateless node. <br>>
>> >>&nbs=
p; >> > <br>> >>
>> >> =
; > Hey David,<br>> >>
>> >> >=
<br>> >> >>
>> > the stateless m=
ode is currently not completely <br>> > working with
<br>> >>=
; > oVirt<br>> >>
>> >> >=
; Engine. That means a Node needs to be approved <br>> > each time
it=
<br>> >> > boots into<br>>
>> >>&nb=
sp; >> > the stateless mode.<br>>
>> >>=
>> > The stateless mode can be entered by
appending <=
br>> > stateless to <br>> >>
> the <br>> >>=
; >> > default<br>>
>>
>> >> > kernel
arguments.<br>> >> =
; >> >> > <br>>
>> >> =
>> > Greetings<br>>
>> >> >&g=
t; > fabian<br>> >>
>> >> &=
gt; <br>> >> >> >
<br>> >> >=
; <br>> > <br><br><br><br></div>
</div> </div> </blockquote></div> =
</div></body></html>
--431184223-617318750-1386720001=:4918--
2 a.m.
--=-oO6urnztMIht7v43UQPt
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Dienstag, den 10.12.2013, 16:00 -0800 schrieb David Li:
Hi Fabian,
=20
=20
Does the stateless ovirt node have the VDSM built-in?=20
Hey David,
stateless is a feature or a special mode of oVirt Node which is also
available on the "oVirt Node for oVirt Engine" image [1].
But please note that you will have to approve the Node in Engine after
each reboot if you use the stateless feature. This bug [2] might also
tackle the problem of a stateless Node.
- fabian
--
[1]
http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.3-1.1.vdsm.f=
c19.iso
[2] https://bugzilla.redhat.com/show_bug.cgi?id=3D875088
=20
David
=20
=20
______________________________________________________________
From: Fabian Deutsch <fabiand(a)redhat.com>
To: David Li <david_li(a)sbcglobal.net>=20
Cc: "users(a)ovirt.org" <users(a)ovirt.org>=20
Sent: Thursday, December 5, 2013 11:47 PM
Subject: Re: [Users] How to pxeboot ovrit node into memory
automatically?
=20
=20
Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb David Li:
> Hi Fabian,
>=20
> I think the bad route is a link local route 169.254.0.0/16.
I am not quite sure if it's a real bug but in my case I have
to remove this route.
> Also I am using ramdisk based node without a local disk. Can
anything be persisted?=20
=20
Hey David,
=20
when you refer to stateless mode, then no, nothing can be
persisted.
Regarding the bug - Please provide the whole cmdline you are
using to
boot the node, to give me a chance to reproduce it.
=20
- fabian
=20
> David
>=20
>=20
>=20
> ----- Original Message -----
> > From: Fabian Deutsch <fabiand(a)redhat.com>
> > To: David Li <david_li(a)sbcglobal.net>
> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> > Sent: Wednesday, December 4, 2013 11:17 AM
> > Subject: Re: [Users] How to pxeboot ovrit node into memory
automatically?
> >=20
> > Am Montag, den 02.12.2013, 13:53 -0800 schrieb David Li:
> >> Hi Fabian,
> >>=20
> >> Everytime the ovirt node boots up, it adds a route entry
that I have to=20
> > manually remove. Otherwise it messed up my routing.=20
> >> How do I modify the boot scripts to automatically remove
it?
> >=20
> > Hey David,
> >=20
> > could you file a bug for that route problem?
> >=20
> > You can try the following workaround:
> >=20
> > # Create /etc/rc.d/rc.local with the commands to run
> > $ vi /etc/rc.d/rc.local
> > $ chmod a+x /etc/rc.d/rc.local
> > $ persist /etc/rc.d/rc.local
> >=20
> > /etc/rc.d/rc.local should then be run on every boot.
> >=20
> > - fabian
> >=20
> >> ----- Original Message -----
> >> > From: Fabian Deutsch <fabiand(a)redhat.com>
> >> > To: David Li <david_li(a)sbcglobal.net>
> >> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> >> > Sent: Monday, October 28, 2013 7:45 AM
> >> > Subject: Re: [Users] How to pxeboot ovrit node into
memory=20
> > automatically?
> >> >=20
> >> > Am Montag, den 28.10.2013, 07:42 -0700 schrieb David
Li:
> >> >>=20
> >> >> Hi Fabian,
> >> >>=20
> >> >> Yes rootpwd worked too! Thanks.
> >> >>=20
> >> >> Two new problems:
> >> >>=20
> >> >> But I found there is no networking for the stateless
node.
> >> >> What kernel boot options are used to either use DHCP
or=20
> > statically=20
> >> > configure the IP address for an interface on the node?
> >> >>=20
> >> >> I also need to have the sshd enabled. Is there a
kernel option=20
> > for that?
> >> >=20
> >> > Hey David,
> >> >=20
> >> > here you can find all the supported boot params in
ovirt node:
> >> >=20
> >
http://gerrit.ovirt.org/gitweb?p=3Dovirt-node.git;a=3Dblob;f=3Dsc=
ripts/ovirt-init-functions.sh.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7f30397=
33;hb=3DHEAD#l214
> >> >=20
> >> > Greetings
> >> > fabian
> >> >=20
> >> >> David
> >> >>=20
> >> >>=20
> >> >>=20
> >> >> ----- Original Message -----
> >> >> > From: Fabian Deutsch <fabiand(a)redhat.com>
> >> >> > To: David Li <david_li(a)sbcglobal.net>
> >> >> > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> >> >> > Sent: Friday, October 25, 2013 9:10 AM
> >> >> > Subject: Re: [Users] How to pxeboot ovrit node
into memory=20
> >> > automatically?
> >> >> >=20
> >> >> > Am Freitag, den 25.10.2013, 08:57 -0700 schrieb
David Li:
> >> >> >> Hi Fabian,
> >> >> >>=20
> >> >> >> That kernel option worked for me! The node
is
booted=20
> > up in RAM.=20
> >> > Thanks!
> >> >> >>=20
> >> >> >> My next question is:
> >> >> >> How do I specify the root login and passwd as
boot=20
> > parameters?=20
> >> >> >=20
> >> >> > Hey David.
> >> >> >=20
> >> >> > Nice that it worked! Were you able to register to
the=20
> > Engine?
> >> >> >=20
> >> >> > You can use the adminpw=3D and rootpw=3D kernel
arguments to set=20
> >=20
> >> > passwords.
> >> >> > use
> >> >> > $ openssl passwd -salt 42
> >> >> > to create one or two passwords
> >> >> >=20
> >> >> > Greetings
> >> >> > fabian
> >> >> >=20
> >> >> >> David
> >> >> >>=20
> >> >> >>=20
> >> >> >>=20
> >> >> >>=20
> >> >> >> ----- Original Message -----
> >> >> >> > From: Fabian Deutsch
<fabiand(a)redhat.com>
> >> >> >> > To: David Li
<david_li(a)sbcglobal.net>
> >> >> >> > Cc: "users(a)ovirt.org"=20
> > <users(a)ovirt.org>
> >> >> >> > Sent: Thursday, October 24, 2013 11:47
PM
> >> >> >> > Subject: Re: [Users] How to pxeboot
ovrit
node=20
> > into memory=20
> >> >> > automatically?
> >> >> >> >=20
> >> >> >> > Am Donnerstag, den 24.10.2013, 16:26
-0700
schrieb=20
> > David Li:
> >> >> >> >> Hi,
> >> >> >> >>=20
> >> >> >> >> I was following the instructions
at=20
> >> >> > http://www.ovirt.org/Node_PXE. My goal=20
> >> >> >> > is to use pxeboot (iPXE) to boot the
node
entirely=20
> > into RAM=20
> >> > with=20
> >> >> > rootfs. What I=20
> >> >> >> > got now is an installation screen which
requires a=20
> > local=20
> >> > storage. My=20
> >> >> > system has=20
> >> >> >> > no disk and this doesn't quite work
for me.=20
> >> >> >> >>=20
> >> >> >> >> What's are the kernel parameters
I need=20
> > to use to=20
> >> > boot the=20
> >> >> > node into=20
> >> >> >> > RAM automatically? I am OK as the first
step
with=20
> > a=20
> >> > stateless node.=20
> >> >> >> >=20
> >> >> >> > Hey David,
> >> >> >> >=20
> >> >> >> > the stateless mode is currently not
completely=20
> > working with=20
> >> > oVirt
> >> >> >> > Engine. That means a Node needs to be
approved=20
> > each time it=20
> >> > boots into
> >> >> >> > the stateless mode.
> >> >> >> > The stateless mode can be entered by
appending=20
> > stateless to=20
> >> > the=20
> >> >> > default
> >> >> >> > kernel arguments.
> >> >> >> >=20
> >> >> >> > Greetings
> >> >> >> > fabian
> >> >> >> >=20
> >> >> >=20
> >> >=20
> >=20
=20
=20
=20
=20
--=-oO6urnztMIht7v43UQPt
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=XoBZ
-----END PGP SIGNATURE-----
--=-oO6urnztMIht7v43UQPt--
7:32 p.m.
---482694697-632449327-1386811971=:4732
Content-Type: text/plain; charset=us-ascii
Hi Fabian,
I booted the new node stateless. But how can connect to it from ovirt engine cli? The cli
asks for three things: URL, user name and password. I am not sure how to put them on the
kernel boot option line.
David
---482694697-632449327-1386811971=:4732
Content-Type: text/html; charset=us-ascii
<table cellspacing="0" cellpadding="0"
border="0"><tr><td valign="top"><p
dir="ltr">Hi Fabian,</p>
<p dir="ltr">I booted the new node stateless. But how can connect to it
from ovirt engine cli? The cli asks for three things: URL, user name and password. I am
not sure how to put them on the kernel boot option line.</p>
<p dir="ltr">David<br>
</p>
</td></tr></table> <div id="_origMsg_">
<div>
<br />
<div>
<div style="font-size:0.9em">
<hr size="1">
<b>
<span
style="font-weight:bold">From:</span>
</b>
Fabian Deutsch &lt;fabiand(a)redhat.com&gt;;
<br>
<b>
<span
style="font-weight:bold">To:</span>
</b>
David Li &lt;david_li(a)sbcglobal.net&gt;;
<br>
<b>
<span
style="font-weight:bold">Cc:</span>
</b>
users(a)ovirt.org &lt;users(a)ovirt.org&gt;;
<br>
<b>
<span
style="font-weight:bold">Subject:</span>
</b>
Re: [Users] How to pxeboot ovrit node into memory
automatically? <br>
<b>
<span
style="font-weight:bold">Sent:</span>
</b>
Wed, Dec 11, 2013 8:00:40 AM
<br>
</div>
<br>
<table cellspacing="0" cellpadding="0"
border="0">
<tbody>
<tr>
<td valign="top">Am Dienstag, den
10.12.2013, 16:00 -0800 schrieb David Li:<BR>> Hi Fabian,<BR>>
<BR>> <BR>> Does the stateless ovirt node have the VDSM
built-in? <BR><BR>Hey David,<BR><BR>stateless is a feature or a
special mode of oVirt Node which is also<BR>available on the "oVirt Node for
oVirt Engine" image [1].<BR>But please note that you will have to approve the
Node in Engine after<BR>each reboot if you use the stateless feature. This bug [2]
might also<BR>tackle the problem of a stateless Node.<BR><BR>-
fabian<BR><BR>--<BR>[1]<BR><a
href="http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0...
target=_blank
>http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso</a><BR>[2]
<a href="https://bugzilla.redhat.com/show_bug.cgi?id=875088" target=_blank
>https://bugzilla.redhat.com/show_bug.cgi?id=875088</a><BR><BR>>
<BR>> David<BR>>
<BR>>
<BR>>
______________________________________________________________<BR>>
From: Fabian Deutsch <<a
ymailto="mailto:fabiand@redhat.com"
href="javascript:return">fabiand@redhat.com</a>><BR>>
To: David Li <<a
ymailto="mailto:david_li@sbcglobal.net"
href="javascript:return">david_li@sbcglobal.net</a>>
<BR>> Cc: "<a
ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>" <<a
ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>>
<BR>> Sent: Thursday, December 5,
2013 11:47 PM<BR>> Subject: Re:
[Users] How to pxeboot ovrit node into memory<BR>>
automatically?<BR>>
<BR>>
<BR>>
Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb
David Li:<BR>> > Hi
Fabian,<BR>> >
<BR>> > I think the bad
route is a link local route 169.254.0.0/16.<BR>>
I am not quite sure if it's a real bug but in my case I
have<BR>> to remove this
route.<BR>> > Also I am
using ramdisk based node without a local disk. Can<BR>>
anything be persisted? <BR>>
<BR>> Hey
David,<BR>>
<BR>> when you refer to stateless
mode, then no, nothing can be<BR>>
persisted.<BR>> Regarding the
bug - Please provide the whole cmdline you are<BR>>
using to<BR>>
boot the node, to give me a chance to reproduce
it.<BR>>
<BR>> -
fabian<BR>>
<BR>> >
David<BR>> >
<BR>> >
<BR>> >
<BR>> > ----- Original
Message -----<BR>> >
> From: Fabian Deutsch <<a ymailto="mailto:fabiand@redhat.com"
href="javascript:return">fabiand@redhat.com</a>><BR>>
> > To: David Li <<a
ymailto="mailto:david_li@sbcglobal.net"
href="javascript:return">david_li@sbcglobal.net</a>><BR>>
> > Cc: "<a
ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>" <<a
ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>><BR>>
> > Sent: Wednesday, December 4, 2013
11:17 AM<BR>> > >
Subject: Re: [Users] How to pxeboot ovrit node into memory<BR>>
automatically?<BR>>
> > <BR>>
> > Am Montag, den 02.12.2013, 13:53 -0800 schrieb
David Li:<BR>> >
>> Hi Fabian,<BR>>
> >> <BR>>
> >> Everytime the ovirt node boots up, it adds
a route entry<BR>> that I have to
<BR>> > > manually
remove. Otherwise it messed up my routing. <BR>>
> >> How do I modify the boot
scripts to automatically
remove<BR>>
it?<BR>> > >
<BR>> > > Hey
David,<BR>> > >
<BR>> > > could you
file a bug for that route problem?<BR>>
> > <BR>>
> > You can try the following
workaround:<BR>> >
> <BR>> > >
# Create /etc/rc.d/rc.local with the commands to run<BR>>
> > $ vi
/etc/rc.d/rc.local<BR>> >
> $ chmod a+x /etc/rc.d/rc.local<BR>>
> > $ persist /etc/rc.d/rc.local<BR>>
> > <BR>>
> > /etc/rc.d/rc.local should then be run
on every boot.<BR>>
> > <BR>>
> > - fabian<BR>>
> > <BR>>
> >> ----- Original Message
-----<BR>> >
>> > From: Fabian Deutsch <<a
ymailto="mailto:fabiand@redhat.com"
href="javascript:return">fabiand@redhat.com</a>><BR>>
> >> > To: David
Li <<a ymailto="mailto:david_li@sbcglobal.net"
href="javascript:return">david_li@sbcglobal.net</a>><BR>>
> >> > Cc:
"<a ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>" <<a
ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>><BR>>
> >> > Sent:
Monday, October 28, 2013 7:45 AM<BR>>
> >> > Subject:
Re: [Users] How to pxeboot ovrit node into<BR>>
memory <BR>>
> > automatically?<BR>>
> >> >
<BR>> >
>> > Am Montag, den 28.10.2013, 07:42 -0700 schrieb
David<BR>>
Li:<BR>> >
>> >> <BR>>
> >> >> Hi
Fabian,<BR>> >
>> >> <BR>>
> >> >> Yes
rootpwd worked too! Thanks.<BR>>
> >> >> <BR>>
> >>
>> Two new problems:<BR>>
> >> >>
<BR>> >
>>
>> But I found there is no networking for the
stateless<BR>>
node.<BR>> >
>> >> What kernel boot options are used to
either use DHCP<BR>> or
<BR>> > >
statically <BR>> >
>> > configure the IP address for an interface on the
node?<BR>> >
>> >> <BR>>
> >> >> I
also need to have the sshd enabled. Is there a<BR>>
kernel option <BR>>
> > for that?<BR>>
> >> > <BR>>
> >> > Hey
David,<BR>> >
>> > <BR>>
> >> > here you can find all the
supported boot params in<BR>>
ovirt node:<BR>> >
>> > <BR>>
> ><BR>>
<a
href="http://gerrit.ovirt.org/gitweb?p=ovirt-node.git;a=blob;f=scrip...
target=_blank
>http://gerrit.ovirt.org/gitweb?p=ovirt-node.git;a=blob;f=scripts/ovirt-init-functions.sh.in;h=c4280caefb89c77afc1e8bec8c925aa7f3039733;hb=HEAD#l214</a><BR>>
> >> >
<BR>> >
>> > Greetings<BR>>
> >> >
fabian<BR>> >
>> > <BR>>
> >> >>
David<BR>>
> >> >>
<BR>> >
>> >> <BR>>
> >> >>
<BR>> >
>> >> ----- Original Message
-----<BR>> >
>> >> > From: Fabian Deutsch
<<a ymailto="mailto:fabiand@redhat.com"
href="javascript:return">fabiand@redhat.com</a>><BR>>
> >>
>> > To: David Li <<a
ymailto="mailto:david_li@sbcglobal.net"
href="javascript:return">david_li@sbcglobal.net</a>><BR>>
> >>
>> > Cc: "<a
ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>" <<a
ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>><BR>>
>
>> >> > Sent: Friday, October 25,
2013 9:10 AM<BR>> >
>> >> > Subject: Re: [Users] How to
pxeboot ovrit node<BR>> into
memory <BR>> >
>> > automatically?<BR>>
> >> >>
> <BR>> >
>> >> > Am Freitag, den 25.10.2013,
08:57 -0700 schrieb<BR>> David
Li:<BR>> >
>> >> >> Hi
Fabian,<BR>> >
>> >> >>
<BR>> >
>> >> >> That
kernel option worked for me! The node is<BR>>
booted <BR>>
> > up in RAM. <BR>>
> >> >
Thanks!<BR>> >
>> >> >>
<BR>> >
>> >> >> My next
question is:<BR>> >
>> >> >> How do I specify
the root login and passwd as<BR>>
boot <BR>> > >
parameters? <BR>> >
>> >> >
<BR>> >
>> >> > Hey
David.<BR>> >
>> >> >
<BR>> >
>> >> > Nice that it worked! Were
you able to register to<BR>> the
<BR>> > >
Engine?<BR>> >
>> >> >
<BR>> >
>> >> > You can use the adminpw=
and rootpw= kernel<BR>> arguments
to set <BR>> > >
<BR>> >
>> > passwords.<BR>>
> >> >>
> use<BR>> >
>> >> > $ openssl passwd -salt
42<BR>> >
>> >> > to create one or two
passwords<BR>> >
>> >> >
<BR>> >
>> >> >
Greetings<BR>> >
>> >> >
fabian<BR>> >
>> >> >
<BR>> >
>> >> >>
David<BR>> >
>> >> >>
<BR>> >
>> >> >>
<BR>> >
>> >> >>
<BR>> >
>> >> >>
<BR>> >
>> >> >> -----
Original Message -----<BR>>
> >> >> >>
> From: Fabian Deutsch <<a ymailto="mailto:fabiand@redhat.com"
href="javascript:return">fabiand@redhat.com</a>><BR>>
> >>
>> >> > To: David Li <<a
ymailto="mailto:david_li@sbcglobal.net"
href="javascript:return">david_li@sbcglobal.net</a>><BR>>
> >>
>> >> > Cc: "<a
ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>"
<BR>> > >
<<a ymailto="mailto:users@ovirt.org"
href="javascript:return">users@ovirt.org</a>><BR>>
> >>
>> >> > Sent: Thursday, October 24,
2013 11:47 PM<BR>> >
>> >> >> >
Subject: Re: [Users] How to pxeboot ovrit<BR>>
node <BR>>
> > into memory <BR>>
> >> >> >
automatically?<BR>> >
>> >> >> >
<BR>> >
>> >> >> >
Am Donnerstag, den 24.10.2013, 16:26 -0700<BR>>
schrieb <BR>>
> > David Li:<BR>>
> >> >>
>> >> Hi,<BR>>
> >>
>> >> >>
<BR>> >
>> >> >>
>> I was following the instructions at
<BR>> >
>> >> > <a
href="http://www.ovirt.org/Node_PXE" target=_blank
>http://www.ovirt.org/Node_PXE</a>. My goal <BR>>
> >>
>> >> > is to use pxeboot (iPXE) to
boot the node<BR>> entirely
<BR>> > > into RAM
<BR>>
> >> > with
<BR>> >
>> >> > rootfs. What I
<BR>> >
>> >> >> >
got now is an installation screen which<BR>>
requires a <BR>>
> > local <BR>>
> >> > storage. My <BR>>
> >>
>> > system has <BR>>
> >> >>
>> > no disk and this doesn't quite work for me.
<BR>> >
>> >> >>
>> <BR>> >
>> >> >>
>> What's are the kernel parameters I need
<BR>> > > to use
to
<BR>> >
>> > boot the <BR>>
> >> >>
> node into <BR>> >
>> >> >> >
RAM automatically? I am OK as the first step<BR>>
with <BR>>
> > a <BR>>
> >> > stateless node.
<BR>> >
>> >> >> >
<BR>> >
>> >> >> >
Hey David,<BR>> >
>> >> >> >
<BR>> >
>> >> >> >
the stateless mode is currently not<BR>>
completely <BR>>
> > working with <BR>>
> >> > oVirt<BR>>
> >>
>> >> > Engine. That means a Node
needs to be<BR>> approved
<BR>> > > each time
it <BR>> >
>> > boots into<BR>>
> >> >>
>> > the stateless mode.<BR>>
> >>
>> >> > The stateless mode can be
entered by<BR>> appending
<BR>> > > stateless
to <BR>> >
>> > the <BR>>
> >> >> >
default<BR>> >
>> >>
>> > kernel arguments.<BR>>
> >>
>> >> >
<BR>> >
>> >> >> >
Greetings<BR>> >
>> >> >> >
fabian<BR>> >
>> >> >> >
<BR>> >
>> >> >
<BR>> >
>> > <BR>>
> > <BR>>
<BR>>
<BR>>
<BR>>
<BR><BR></td>
</tr>
</tbody>
</table>
</div>
</div>
</div>
---482694697-632449327-1386811971=:4732--
9:40 a.m.
--=-Gsg9rXjjnSvmt+OopBm4
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Mittwoch, den 11.12.2013, 17:32 -0800 schrieb David Li:
Hi Fabian,
=20
I booted the new node stateless. But how can connect to it from ovirt
engine cli? The cli asks for three things: URL, user name and
password. I am not sure how to put them on the kernel boot option
line.
=20
David
=20
=20
=20
Hey David,
please take a look here to find the correct cmdline:
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtu=
alization/3.0/html/Hypervisor_Deployment_Guide/sect-Deployment_Guide-Instal=
ling_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_Hypervisor_Kernel_P=
arameters_and_Automated_Installation.html
- fabian
=20
______________________________________________________________________
From: Fabian Deutsch <fabiand(a)redhat.com>;=20
To: David Li <david_li(a)sbcglobal.net>;=20
Cc: users(a)ovirt.org <users(a)ovirt.org>;=20
Subject: Re: [Users] How to pxeboot ovrit node into memory
automatically?=20
Sent: Wed, Dec 11, 2013 8:00:40 AM=20
=20
=20
Am Dienstag, den 10.12.2013, 16:00 -0800 schrieb David Li:
> Hi Fabian,
>=20
>=20
> Does the stateless ovirt node have the VDSM built-in?=20
=20
Hey David,
=20
stateless is a feature or a special mode of oVirt Node which is also
available on the "oVirt Node for oVirt Engine" image [1].
But please note that you will have to approve the Node in Engine after
each reboot if you use the stateless feature. This bug [2] might also
tackle the problem of a stateless Node.
=20
- fabian
=20
--
[1]
http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.3-1.1.vdsm=
.fc19.iso
[2] https://bugzilla.redhat.com/show_bug.cgi?id=3D875088
=20
>=20
> David
>=20
> =20
>
______________________________________________________________
> From: Fabian Deutsch <fabiand(a)redhat.com>
> To: David Li <david_li(a)sbcglobal.net>=20
> Cc: "users(a)ovirt.org" <users(a)ovirt.org>=20
> Sent: Thursday, December 5, 2013 11:47 PM
> Subject: Re: [Users] How to pxeboot ovrit node into memory
> automatically?
> =20
> =20
> Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb David Li:
> > Hi Fabian,
> >=20
> > I think the bad route is a link local route 169.254.0.0/16.
> I am not quite sure if it's a real bug but in my case I have
> to remove this route.
> > Also I am using ramdisk based node without a local disk.
Can
> anything be persisted?=20
> =20
> Hey David,
> =20
> when you refer to stateless mode, then no, nothing can be
> persisted.
> Regarding the bug - Please provide the whole cmdline you are
> using to
> boot the node, to give me a chance to reproduce it.
> =20
> - fabian
> =20
> > David
> >=20
> >=20
> >=20
> > ----- Original Message -----
> > > From: Fabian Deutsch <fabiand(a)redhat.com>
> > > To: David Li <david_li(a)sbcglobal.net>
> > > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> > > Sent: Wednesday, December 4, 2013 11:17 AM
> > > Subject: Re: [Users] How to pxeboot ovrit node into
memory
> automatically?
> > >=20
> > > Am Montag, den 02.12.2013, 13:53 -0800 schrieb David Li:
> > >> Hi Fabian,
> > >>=20
> > >> Everytime the ovirt node boots up, it adds a route
entry
> that I have to=20
> > > manually remove. Otherwise it messed up my routing.=20
> > >> How do I modify the boot scripts to automatically
remove
> it?
> > >=20
> > > Hey David,
> > >=20
> > > could you file a bug for that route problem?
> > >=20
> > > You can try the following workaround:
> > >=20
> > > # Create /etc/rc.d/rc.local with the commands to run
> > > $ vi /etc/rc.d/rc.local
> > > $ chmod a+x /etc/rc.d/rc.local
> > > $ persist /etc/rc.d/rc.local
> > >=20
> > > /etc/rc.d/rc.local should then be run on every boot.
> > >=20
> > > - fabian
> > >=20
> > >> ----- Original Message -----
> > >> > From: Fabian Deutsch <fabiand(a)redhat.com>
> > >> > To: David Li <david_li(a)sbcglobal.net>
> > >> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> > >> > Sent: Monday, October 28, 2013 7:45 AM
> > >> > Subject: Re: [Users] How to pxeboot ovrit node into
> memory=20
> > > automatically?
> > >> >=20
> > >> > Am Montag, den 28.10.2013, 07:42 -0700 schrieb David
> Li:
> > >> >>=20
> > >> >> Hi Fabian,
> > >> >>=20
> > >> >> Yes rootpwd worked too! Thanks.
> > >> >>=20
> > >> >> Two new problems:
> > >> >>=20
> > >> >> But I found there is no networking for the
stateless
> node.
> > >> >> What kernel boot options are used to either use
DHCP
> or=20
> > > statically=20
> > >> > configure the IP address for an interface on the
node?
> > >> >>=20
> > >> >> I also need to have the sshd enabled. Is there a
> kernel option=20
> > > for that?
> > >> >=20
> > >> > Hey David,
> > >> >=20
> > >> > here you can find all the supported boot params in
> ovirt node:
> > >> >=20
> > >
>
http://gerrit.ovirt.org/gitweb?p=3Dovirt-node.git;a=3Dblob;f=3Dscripts/ov=
irt-init-functions.sh.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7f3039733;hb=3D=
HEAD#l214
> > >> >=20
> > >> > Greetings
> > >> > fabian
> > >> >=20
> > >> >> David
> > >> >>=20
> > >> >>=20
> > >> >>=20
> > >> >> ----- Original Message -----
> > >> >> > From: Fabian Deutsch
<fabiand(a)redhat.com>
> > >> >> > To: David Li <david_li(a)sbcglobal.net>
> > >> >> > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> > >> >> > Sent: Friday, October 25, 2013 9:10 AM
> > >> >> > Subject: Re: [Users] How to pxeboot ovrit node
> into memory=20
> > >> > automatically?
> > >> >> >=20
> > >> >> > Am Freitag, den 25.10.2013, 08:57 -0700
schrieb
> David Li:
> > >> >> >> Hi Fabian,
> > >> >> >>=20
> > >> >> >> That kernel option worked for me! The
node is
> booted=20
> > > up in RAM.=20
> > >> > Thanks!
> > >> >> >>=20
> > >> >> >> My next question is:
> > >> >> >> How do I specify the root login and passwd
as
> boot=20
> > > parameters?=20
> > >> >> >=20
> > >> >> > Hey David.
> > >> >> >=20
> > >> >> > Nice that it worked! Were you able to register
to
> the=20
> > > Engine?
> > >> >> >=20
> > >> >> > You can use the adminpw=3D and rootpw=3D
kernel
> arguments to set=20
> > >=20
> > >> > passwords.
> > >> >> > use
> > >> >> > $ openssl passwd -salt 42
> > >> >> > to create one or two passwords
> > >> >> >=20
> > >> >> > Greetings
> > >> >> > fabian
> > >> >> >=20
> > >> >> >> David
> > >> >> >>=20
> > >> >> >>=20
> > >> >> >>=20
> > >> >> >>=20
> > >> >> >> ----- Original Message -----
> > >> >> >> > From: Fabian Deutsch
<fabiand(a)redhat.com>
> > >> >> >> > To: David Li
<david_li(a)sbcglobal.net>
> > >> >> >> > Cc: "users(a)ovirt.org"=20
> > > <users(a)ovirt.org>
> > >> >> >> > Sent: Thursday, October 24, 2013
11:47 PM
> > >> >> >> > Subject: Re: [Users] How to pxeboot
ovrit
> node=20
> > > into memory=20
> > >> >> > automatically?
> > >> >> >> >=20
> > >> >> >> > Am Donnerstag, den 24.10.2013, 16:26
-0700
> schrieb=20
> > > David Li:
> > >> >> >> >> Hi,
> > >> >> >> >>=20
> > >> >> >> >> I was following the instructions
at=20
> > >> >> > http://www.ovirt.org/Node_PXE. My goal=20
> > >> >> >> > is to use pxeboot (iPXE) to boot the
node
> entirely=20
> > > into RAM=20
> > >> > with=20
> > >> >> > rootfs. What I=20
> > >> >> >> > got now is an installation screen
which
> requires a=20
> > > local=20
> > >> > storage. My=20
> > >> >> > system has=20
> > >> >> >> > no disk and this doesn't quite
work for me.=20
> > >> >> >> >>=20
> > >> >> >> >> What's are the kernel
parameters I need=20
> > > to use to=20
> > >> > boot the=20
> > >> >> > node into=20
> > >> >> >> > RAM automatically? I am OK as the
first step
> with=20
> > > a=20
> > >> > stateless node.=20
> > >> >> >> >=20
> > >> >> >> > Hey David,
> > >> >> >> >=20
> > >> >> >> > the stateless mode is currently not
> completely=20
> > > working with=20
> > >> > oVirt
> > >> >> >> > Engine. That means a Node needs to
be
> approved=20
> > > each time it=20
> > >> > boots into
> > >> >> >> > the stateless mode.
> > >> >> >> > The stateless mode can be entered by
> appending=20
> > > stateless to=20
> > >> > the=20
> > >> >> > default
> > >> >> >> > kernel arguments.
> > >> >> >> >=20
> > >> >> >> > Greetings
> > >> >> >> > fabian
> > >> >> >> >=20
> > >> >> >=20
> > >> >=20
> > >=20
> =20
> =20
> =20
> =20
=20
=20
--=-Gsg9rXjjnSvmt+OopBm4
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=Cdzv
-----END PGP SIGNATURE-----
--=-Gsg9rXjjnSvmt+OopBm4--
7:23 p.m.
--1013620071-1922147181-1386897821=:40672
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Hi Fabian,=0A=0A=0AI have now a setup like this:=0A=0A=0A=A0 +-----------+ =
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 +----------=
----------+=0A=A0 | =A0ovirt-shell | =A0---- network ---------| =A0 =A0 =A0=
stateless node =A0 |=0A+------------+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0+-------------------+=0A=0AA few more questi=
ons:=0A=0A1. Where is the source to build this image?=A0ovirt-node-iso-3.0.=
3-1.1.vdsm.fc19.iso. Is it the same as=A0http://gerrit.ovirt.org/p/ovirt-no=
de.git?=0A=0A2. I am a little confused by the kernel parameter rhevm_admin_=
password and management_server. Are they used by ovirt-shell to connect to =
the ovirt-node? For example in ovirt-shell, =A0should I use "connect =A0--u=
rl http://<ovirt-node-ip-addr>:8080/api --user "user@domain" --password
"rh=
evm_admin_password"? =A0Also in this command line, what's "user@domain"
and=
where do I specify "user" and
"domain"?=0A=0A=0AThanks.=0A=0A=0A>_________=
_______________________=0A> From: Fabian Deutsch <fabiand(a)redhat.com>=0A>To=
: David Li <david_li(a)sbcglobal.net> =0A>Cc: "users(a)ovirt.org"
<users(a)ovirt.=
org> =0A>Sent: Thursday, December 12, 2013 7:40 AM=0A>Subject: Re: [Users] =
How to pxeboot ovrit node into memory automatically?=0A> =0A>=0A>Am Mittwoc=
h, den 11.12.2013, 17:32 -0800 schrieb David Li:=0A>> Hi Fabian,=0A>>
=0A>>=
I booted the new node stateless. But how can connect to it from ovirt=0A>>=
engine cli? The cli asks for three things: URL, user name and=0A>> passwor=
d. I am not sure how to put them on the kernel boot option=0A>> line.=0A>> =
=0A>> David=0A>> =0A>> =0A>> =0A>=0A>Hey
David,=0A>=0A>please take a look h=
ere to find the correct cmdline:=0A>https://access.redhat.com/site/document=
ation/en-US/Red_Hat_Enterprise_Virtualization/3.0/html/Hypervisor_Deploymen=
t_Guide/sect-Deployment_Guide-Installing_Red_Hat_Enterprise_Virtualization_=
Hypervisors-RHEV_Hypervisor_Kernel_Parameters_and_Automated_Installation.ht=
ml=0A>=0A>- fabian=0A>=0A>> =0A>>
_________________________________________=
_____________________________=0A>> From: Fabian Deutsch <fabiand(a)redhat.com=
; =0A>> To: David Li <david_li(a)sbcglobal.net>; =0A>>
Cc: users(a)ovirt.org <=
users(a)ovirt.org>; =0A>> Subject: Re: [Users] How
to pxeboot ovrit node into=
memory=0A>> automatically? =0A>> Sent: Wed, Dec 11, 2013 8:00:40 AM
=0A>> =
=0A>> =0A>> Am Dienstag, den 10.12.2013, 16:00 -0800 schrieb David
Li:=0A>>=
Hi Fabian,=0A>> > =0A>> > =0A>> > Does the
stateless ovirt node have the=
VDSM built-in? =0A>> =0A>> Hey
David,=0A>> =0A>> stateless is a feature or=
a special mode of oVirt Node which is also=0A>> available on the "oVirt No=
de for oVirt Engine" image [1].=0A>> But please note that you will have to =
approve the Node in Engine after=0A>> each reboot if you use the stateless =
feature. This bug [2] might also=0A>> tackle the problem of a stateless Nod=
e.=0A>> =0A>> - fabian=0A>> =0A>> --=0A>> [1]=0A>>
http://resources.ovirt.o=
rg/releases/3.3/iso/ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso=0A>> [2] https:/=
/bugzilla.redhat.com/show_bug.cgi?id=3D875088=0A>> =0A>> > =0A>> >
David=0A=
> > =0A>> >=A0 =A0 =A0 =A0 =0A>> >=0A>>
__________________________________=
____________________________=0A>> >=A0
=A0 =A0 =A0 From: Fabian Deutsch <fa=
biand(a)redhat.com>=0A>> >=A0 =A0 =A0 =A0 To: David Li
<david_li(a)sbcglobal.ne=
t> =0A>> >=A0 =A0 =A0 =A0 Cc: "users(a)ovirt.org"
<users(a)ovirt.org> =0A>> >=
=A0 =A0 =A0 =A0 Sent: Thursday, December 5, 2013 11:47 PM=0A>> >=A0 =A0 =A0=
=A0 Subject: Re: [Users] How to pxeboot ovrit node into memory=0A>> >=A0 =
=A0 =A0 =A0 automatically?=0A>> >=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0
=0A=
> >=A0 =A0 =A0 =A0 Am Donnerstag, den 05.12.2013, 16:30 -0800
schrieb Davi=
d Li:=0A>> >=A0 =A0 =A0 =A0 > Hi Fabian,=0A>>
>=A0 =A0 =A0 =A0 > =0A>> >=A0=
=A0 =A0 =A0 > I think the bad route is a link local route 169.254.0.0/16.=
=0A>> >=A0 =A0 =A0 =A0 I am not quite sure if it's a real bug but in my cas=
e I have=0A>> >=A0 =A0 =A0 =A0 to remove this route.=0A>> >=A0 =A0 =A0
=A0 =
Also I am using ramdisk based node without a local disk.=0A>>
Can=0A>> >=
=A0 =A0 =A0 =A0 anything be persisted? =0A>> >=A0 =A0
=A0 =A0 =0A>> >=A0 =
=A0 =A0 =A0 Hey David,=0A>> >=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0 when
yo=
u refer to stateless mode, then no, nothing can be=0A>> >=A0 =A0 =A0 =A0 pe=
rsisted.=0A>> >=A0 =A0 =A0 =A0 Regarding the bug - Please provide the whole=
cmdline you are=0A>> >=A0 =A0 =A0 =A0 using to=0A>> >=A0 =A0 =A0 =A0
boot =
the node, to give me a chance to reproduce it.=0A>> >=A0 =A0 =A0 =A0 =0A>>
=
=A0 =A0 =A0 =A0 - fabian=0A>> >=A0 =A0 =A0 =A0 =0A>>
>=A0 =A0 =A0 =A0 > Da=
vid=0A>> >=A0 =A0 =A0 =A0 > =0A>>
>=A0 =A0 =A0 =A0 > =0A>> >=A0 =A0 =A0 =A0=
=0A>> >=A0 =A0 =A0 =A0 > ----- Original Message
-----=0A>> >=A0 =A0 =A0 =
=A0 > > From: Fabian Deutsch
<fabiand(a)redhat.com>=0A>> >=A0 =A0 =A0 =A0 > >=
To: David Li <david_li(a)sbcglobal.net>=0A>> >=A0 =A0 =A0 =A0 > > Cc:
"users=
@ovirt.org" <users(a)ovirt.org>=0A>> >=A0 =A0 =A0 =A0 > > Sent:
Wednesday, De=
cember 4, 2013 11:17 AM=0A>> >=A0 =A0 =A0 =A0 > > Subject: Re: [Users] How
=
to pxeboot ovrit node into=0A>> memory=0A>> >=A0 =A0 =A0 =A0
automatically?=
=0A>> >=A0 =A0 =A0 =A0 > > =0A>> >=A0 =A0 =A0 =A0 > > Am
Montag, den 02.12.=
2013, 13:53 -0800 schrieb David Li:=0A>> >=A0 =A0 =A0 =A0 > >>=A0 Hi
Fabian=
,=0A>> >=A0 =A0 =A0 =A0 > >> =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 Everytime the o=
virt node boots up, it adds a route=0A>> entry=0A>> >=A0 =A0 =A0 =A0 that
I=
have to =0A>> >=A0 =A0 =A0 =A0 > > manually remove. Otherwise it messed
up=
my routing. =0A>> >=A0 =A0 =A0 =A0 > >>=A0 How do I modify the boot
script=
s to automatically=0A>> remove=0A>> >=A0 =A0 =A0 =A0 it?=0A>> >=A0
=A0 =A0 =
=A0 > > =0A>> >=A0 =A0 =A0 =A0 > > Hey David,=0A>> >=A0 =A0
=A0 =A0 > > =0A=
> >=A0 =A0 =A0 =A0 > > could you file a bug for that route
problem?=0A>> >=
=A0 =A0 =A0 =A0 > > =0A>> >=A0 =A0 =A0 =A0
> > You can try the following wo=
rkaround:=0A>> >=A0 =A0 =A0 =A0 > > =0A>> >=A0 =A0 =A0 =A0 >
> # Create /et=
c/rc.d/rc.local with the commands to run=0A>> >=A0 =A0 =A0 =A0 > > $ vi
/et=
c/rc.d/rc.local=0A>> >=A0 =A0 =A0 =A0 > > $ chmod a+x
/etc/rc.d/rc.local=0A=
> >=A0 =A0 =A0 =A0 > > $ persist
/etc/rc.d/rc.local=0A>> >=A0 =A0 =A0 =A0 =
> =0A>> >=A0 =A0 =A0 =A0 > > /etc/rc.d/rc.local should then be run on
eve=
ry boot.=0A>> >=A0 =A0 =A0 =A0 > > =0A>> >=A0 =A0 =A0
=A0 > > - fabian=0A>>=
=A0 =A0 =A0 =A0 > > =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 ----- Original Message=
-----=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 > From: Fabian Deutsch <fabiand@redhat=
.com>=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > To: David Li
<david_li(a)sbcglobal.net>=
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>=0A=
> >=A0 =A0 =A0 =A0 > >>=A0 > Sent: Monday, October
28, 2013 7:45 AM=0A>> >=
=A0 =A0 =A0 =A0 > >>=A0 > Subject: Re:
[Users] How to pxeboot ovrit node in=
to=0A>> >=A0 =A0 =A0 =A0 memory =0A>> >=A0 =A0 =A0 =A0 > >
automatically?=
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 > Am Montag=
, den 28.10.2013, 07:42 -0700 schrieb David=0A>> >=A0 =A0 =A0 =A0 Li:=0A>>
=
=A0 =A0 =A0 =A0 > >>=A0 >> =0A>> >=A0 =A0 =A0
=A0 > >>=A0 >>=A0 Hi Fabian,=
=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 Yes =
rootpwd worked too! Thanks.=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>
=0A>> >=A0 =A0=
=A0 =A0 > >>=A0 >>=A0 Two new problems:=0A>> >=A0 =A0 =A0 =A0
> >>=A0 >> =
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 But I found there is no
networking for=
the=0A>> stateless=0A>> >=A0 =A0 =A0 =A0 node.=0A>> >=A0 =A0 =A0
=A0 > >>=
=A0 >>=A0 What kernel boot options are used to either use=0A>> DHCP=0A>>
>=
=A0 =A0 =A0 =A0 or =0A>> >=A0 =A0 =A0 =A0 > > statically =0A>>
>=A0 =A0 =A0=
=A0 > >>=A0 > configure the IP address for an interface on the=0A>>
node?=
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >> =0A>> >=A0 =A0 =A0 =A0
> >>=A0 >>=A0 I al=
so need to have the sshd enabled. Is there a=0A>> >=A0 =A0 =A0 =A0 kernel o=
ption =0A>> >=A0 =A0 =A0 =A0 > > for that?=0A>> >=A0 =A0 =A0 =A0
> >>=A0 > =
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > Hey David,=0A>> >=A0 =A0
=A0 =A0 > >>=A0 >=
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > here you can find all the supported
boot =
params in=0A>> >=A0 =A0 =A0 =A0 ovirt node:=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >=
=0A>> >=A0 =A0 =A0 =A0 > >=0A>> >=0A>>
http://gerrit.ovirt.org/gitweb?p=3D=
ovirt-node.git;a=3Dblob;f=3Dscripts/ovirt-init-functions.sh.in;h=3Dc4280cae=
fb89c77afc1e8bec8c925aa7f3039733;hb=3DHEAD#l214=0A>> >=A0 =A0 =A0 =A0 >
>>=
=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 > Greetings=0A>>
>=A0 =A0 =A0 =A0 > >>=
=A0 > fabian=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > =0A>> >=A0
=A0 =A0 =A0 > >>=A0=
>=A0 David=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>
=0A>> >=A0 =A0 =A0 =A0 > >>=
=A0 >> =0A>> >=A0 =A0
=A0 =A0 > >>=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=
=A0 ----- Original Message -----=0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 > From=
: Fabian Deutsch <fabiand(a)redhat.com>=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >=
To: David Li <david_li(a)sbcglobal.net>=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 =
Cc: "users(a)ovirt.org" <users(a)ovirt.org>=0A>>
>=A0 =A0 =A0 =A0 > >>=A0 >>=
=A0 > Sent: Friday, October 25,
2013 9:10 AM=0A>> >=A0 =A0 =A0 =A0 > >>=A0 =
>=A0 > Subject: Re: [Users] How to pxeboot ovrit node=0A>>
>=A0 =A0 =A0 =
=A0 into memory =0A>> >=A0 =A0 =A0 =A0 > >>=A0
> automatically?=0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 > Am Freit=
ag, den 25.10.2013, 08:57 -0700 schrieb=0A>> >=A0 =A0 =A0 =A0 David Li:=0A>=
>=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 Hi
Fabian,=0A>> >=A0 =A0 =A0 =A0 > >=
=A0 >>=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 That kernel option=
worked for me!=A0 The node is=0A>> >=A0
=A0 =A0 =A0 booted =0A>> >=A0 =A0 =
=A0 =A0 > > up in RAM. =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >
Thanks!=0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 >>=A0 >> =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >>=A0 My =
next question is:=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >> How
do I specify t=
he root login and passwd as=0A>> >=A0 =A0 =A0 =A0 boot =0A>> >=A0 =A0
=A0 =
=A0 > > parameters? =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
> =0A>> >=A0 =A0 =
=A0 =A0 > >>=A0 >>=A0 > Hey David.=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 > =
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > Nice that it worked!
Were you able t=
o register to=0A>> >=A0 =A0 =A0 =A0 the =0A>> >=A0 =A0 =A0 =A0 > >
Engine?=
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > =0A>> >=A0 =A0
=A0 =A0 > >>=A0 >>=A0=
You can use the adminpw=3D and rootpw=3D kernel=0A>> >=A0
=A0 =A0 =A0 ar=
guments to set =0A>> >=A0 =A0 =A0 =A0 > > =0A>>
>=A0 =A0 =A0 =A0 > >>=A0 > =
passwords.=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > use=0A>>
>=A0 =A0 =A0 =A0 =
>>=A0 >>=A0 > $ openssl passwd -salt 42=0A>>
>=A0 =A0 =A0 =A0 > >>=A0 >>=
=A0 > to create one or two
passwords=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > =
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > Greetings=0A>>
>=A0 =A0 =A0 =A0 > >>=
=A0 >>=A0 > fabian=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
> =0A>> >=A0 =A0 =A0=
=A0 > >>=A0 >>=A0 >>=A0 David=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >> =0A>>=
=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >> =0A>>
>=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >> =
=0A>> >=A0 =A0
=A0 =A0 > >>=A0 >>=A0 >> =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=
=A0 >>=A0 ----- Original Message -----=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 =
>=A0 > From: Fabian Deutsch
<fabiand(a)redhat.com>=0A>> >=A0 =A0 =A0 =A0 > >=
=A0 >>=A0 >>=A0 > To: David Li <david_li(a)sbcglobal.net>=0A>>
>=A0 =A0 =A0 =
=A0 > >>=A0 >>=A0 >>=A0 > Cc:
"users(a)ovirt.org" =0A>> >=A0 =A0 =A0 =A0 > > =
<users(a)ovirt.org>=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 > Sent: Thursda=
y, October 24, 2013 11:47 PM=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 > Su=
bject: Re: [Users] How to pxeboot ovrit=0A>> >=A0 =A0 =A0 =A0 node =0A>>
>=
=A0 =A0 =A0 =A0 > > into memory =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 > auto=
matically?=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 >
=0A>> >=A0 =A0 =A0 =
=A0 > >>=A0 >>=A0 >>=A0 > Am Donnerstag, den 24.10.2013, 16:26
-0700=0A>> >=
=A0 =A0 =A0 =A0 schrieb =0A>> >=A0 =A0 =A0 =A0 > > David Li:=0A>>
>=A0 =A0 =
=A0 =A0 > >>=A0 >>=A0 >>=A0 >>=A0 Hi,=0A>> >=A0 =A0
=A0 =A0 > >>=A0 >>=A0 >=
=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 >>=A0 >>=A0 I was following th=
e instructions at
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > http://www.ovirt.o=
rg/Node_PXE. My goal =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 > is to use=
pxeboot (iPXE) to boot the node=0A>> >=A0 =A0 =A0 =A0 entirely =0A>>
>=A0 =
=A0 =A0 =A0 > > into RAM =0A>> >=A0 =A0 =A0 =A0 > >>=A0 > with
=0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 >>=A0 > rootfs. What I =0A>> >=A0 =A0 =A0
=A0 > >>=A0 >=
=A0 >>=A0 > got now is an installation screen
which=0A>> >=A0 =A0 =A0 =A0 =
requires a =0A>> >=A0 =A0 =A0 =A0
> > local =0A>> >=A0 =A0 =A0 =A0 > >>=A0 =
storage. My =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 > system has =0A>> >=A0 =
=A0 =A0 =A0 > >>=A0
>>=A0 >>=A0 > no disk and this doesn't quite work for m=
e. =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 >>
=0A>> >=A0 =A0 =A0 =A0 > >=
=A0 >>=A0 >>=A0 >>=A0 What's are the kernel
parameters I need =0A>> >=A0 =
=A0 =A0 =A0 > > to use to =0A>>
>=A0 =A0 =A0 =A0 > >>=A0 > boot the =0A>> >=
=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > node into =0A>> >=A0 =A0 =A0
=A0 > >>=A0 >>=
=A0 >>=A0 > RAM automatically?=A0 I am OK as the first step=0A>> >=A0
=A0 =
=A0 =A0 with =0A>> >=A0 =A0 =A0 =A0 > > a =0A>> >=A0 =A0 =A0 =A0
> >>=A0 > =
stateless node. =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0
> =0A>> >=A0 =A0=
=A0 =A0 > >>=A0 >>=A0 >>=A0 > Hey David,=0A>> >=A0 =A0
=A0 =A0 > >>=A0 >>=
=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 > the stateless mode=
is currently not=0A>> >=A0 =A0 =A0 =A0 completely =0A>> >=A0 =A0 =A0
=A0 >=
working with =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >
oVirt=0A>> >=A0 =A0 =A0 =
=A0 > >>=A0 >>=A0 >>=A0 >
Engine. That means a Node needs to be=0A>> >=A0 =
=A0 =A0 =A0 approved =0A>> >=A0 =A0 =A0 =A0 > > each time it =0A>>
>=A0 =A0=
=A0 =A0 > >>=A0 > boots into=0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 >>=A0 > t=
he stateless mode.=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0
> The stateles=
s mode can be entered by=0A>> >=A0 =A0 =A0 =A0 appending =0A>> >=A0 =A0
=A0=
=A0 > > stateless to =0A>> >=A0 =A0 =A0 =A0 > >>=A0 > the
=0A>> >=A0 =A0 =
=A0 =A0 > >>=A0 >>=A0 > default=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >>=A0 >=
kernel arguments.=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0
> =0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 > Greetings=0A>> >=A0 =A0
=A0 =A0 > >>=A0 >=
=A0 >>=A0 > fabian=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >>=A0 > =0A>> >=A0 =
=A0 =A0 =A0 >
>>=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >
=0A>> >=A0 =A0=
=A0 =A0 > > =0A>> >=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0
=0A>> >=A0 =A0 =
=A0 =A0 =0A>> >=A0 =A0 =A0 =A0 =0A>> =0A>>
=0A>=0A>=0A>=0A>
--1013620071-1922147181-1386897821=:40672
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"color:#000; background-color:#fff;
font-family:ti=
mes new roman, new york, times, serif;font-size:12pt"><div>Hi
Fabian,</div>=
<div><br></div><div style=3D"color: rgb(0, 0, 0); font-size:
16px; font-fam=
ily: 'times new roman', 'new york', times, serif; background-color:
transpa=
rent; font-style: normal;"><br></div><div style=3D"color:
rgb(0, 0, 0); fon=
t-size: 16px; font-family: 'times new roman', 'new york', times, serif;
bac=
kground-color: transparent; font-style: normal;">I have now a setup like th=
is:</div><div style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family:
'=
times new roman', 'new york', times, serif; background-color: transparent; =
font-style: normal;"><br></div><div style=3D"color: rgb(0, 0,
0); font-size=
: 16px; font-family: 'times new roman', 'new york', times, serif;
backgroun=
d-color: transparent; font-style: normal;"><br></div><div
style=3D"color: r=
gb(0, 0, 0); font-size: 16px; font-family: 'times new roman', 'new york',
t=
imes,
serif; background-color: transparent; font-style: normal;"> +-------=
----+
=
+--------------------+</div><div=
style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: 'times new rom=
an', 'new york', times, serif; background-color: transparent; font-style: n=
ormal;"> | ovirt-shell | ---- network ---------|
&=
nbsp; stateless node |</div><div style=3D"color: rgb(0,
0, 0);=
font-size: 16px; font-family: 'times new roman', 'new york', times,
serif;=
background-color: transparent; font-style: normal;">+------------+ =
 =
;
+-------------------+</div><div style=
=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: 'times new roman',
'=
new york', times, serif; background-color: transparent; font-style:
normal;"><br></div><div style=3D"color: rgb(0, 0, 0);
font-size: 16px; fon=
t-family: 'times new roman', 'new york', times, serif; background-color:
tr=
ansparent; font-style: normal;">A few more questions:</div><div
style=3D"co=
lor: rgb(0, 0, 0); font-size: 16px; font-family: 'times new roman', 'new yo=
rk', times, serif; background-color: transparent; font-style:
normal;"><br>=
</div><div style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family:
'tim=
es new roman', 'new york', times, serif; background-color: transparent; fon=
t-style: normal;">1. Where is the source to build this image? <span
st=
yle=3D"font-size: 12pt;">ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso. Is it the =
same as </span><span style=3D"background-color: rgb(136, 136, 136);
co=
lor: rgb(238, 238, 238); font-family: Monaco, Menlo, Consolas, 'Courier New=
', monospace; font-size: 13px; line-height: 20px; white-space: pre-wrap;">h=
ttp://gerrit.ovirt.org/p/ovirt-node.git?</span></div><div&...
style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: 'times new rom=
an', 'new york', times, serif; background-color: transparent; font-style: n=
ormal;">2. I am a little confused by the kernel parameter rhevm_admin_passw=
ord and management_server. Are they used by ovirt-shell to connect to the o=
virt-node? For example in ovirt-shell, should I use "connect --=
url http://<ovirt-node-ip-addr>:8080/api --user "user@domain"
--passw=
ord "rhevm_admin_password"? Also in this command line, what's
"user@d=
omain" and where do I specify "user" and
"domain"?</div><div style=3D"color=
: rgb(0, 0, 0); font-size: 16px; font-family: 'times new roman', 'new
york'=
, times, serif; background-color: transparent; font-style:
normal;"><br></d=
iv><div style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: 'times
=
new roman', 'new york', times, serif; background-color: transparent; font-s=
tyle: normal;"><br></div><div style=3D"color: rgb(0, 0, 0);
font-size: 16px=
;
font-family: 'times new roman', 'new york', times, serif;
background-color=
: transparent; font-style: normal;">Thanks.</div><div
style=3D"color: rgb(0=
, 0, 0); font-size: 16px; font-family: 'times new roman', 'new york',
times=
, serif; background-color: transparent; font-style:
normal;"><br></div><div=
style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: 'times new rom=
an', 'new york', times, serif; background-color: transparent; font-style: n=
ormal;"><blockquote style=3D"border-left: 2px solid rgb(16, 16, 255);
margi=
n-left: 5px; margin-top: 5px; padding-left: 5px;"> <div
style=3D"font-fami=
ly: 'times new roman', 'new york', times, serif; font-size:
12pt;"> <div st=
yle=3D"font-family: 'times new roman', 'new york', times, serif;
font-size:=
12pt;"> <div dir=3D"ltr"> <hr size=3D"1">
<font size=3D"2" face=3D"Arial"=
<b><span
style=3D"font-weight:bold;">From:</span></b> Fabian Deutsch
<=
fabiand(a)redhat.com&gt;<br> <b><span
style=3D"font-weight: bold;">To:</span>=
</b> David Li
&lt;david_li(a)sbcglobal.net&gt; <br><b><span
style=3D"font-weight: bold;">C=
c:</span></b> "users(a)ovirt.org" &lt;users(a)ovirt.org&gt;
<br> <b><span style=
=3D"font-weight: bold;">Sent:</span></b> Thursday, December 12,
2013 7:40 A=
M<br> <b><span style=3D"font-weight:
bold;">Subject:</span></b> Re: [Users]=
How to pxeboot ovrit node into memory automatically?<br> </font> </div>
<d=
iv class=3D"y_msg_container"><br>=0AAm Mittwoch, den 11.12.2013, 17:32
-080=
0 schrieb David Li:<br>> Hi Fabian,<br>> <br>> I
booted the new no=
de stateless. But how can connect to it from ovirt<br>> engine cli? The =
cli asks for three things: URL, user name and<br>> password. I am not su=
re how to put them on the kernel boot option<br>> line.<br>>
<br>>=
David<br>> <br>> <br>> <br><br>Hey
David,<br><br>please take a lo=
ok here to find the correct cmdline:<br><a
href=3D"https://access.redhat.co=
m/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.0/html/Hyper=
visor_Deployment_Guide/sect-Deployment_Guide-Installing_Red_Hat_Enterprise_=
Virtualization_Hypervisors-RHEV_Hypervisor_Kernel_Parameters_and_Automated_=
Installation.html"
target=3D"_blank">https://access.redhat.com/site/documentati...
at_Enterprise_Virtualization/3.0/html/Hypervisor_Deployment_Guide/sect-Depl=
oyment_Guide-Installing_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_=
Hypervisor_Kernel_Parameters_and_Automated_Installation.html</a><br><br>-
f=
abian<br><br>> <br>>
________________________________________________=
______________________<br>> From: Fabian Deutsch <<a
ymailto=3D"mailt=
o:fabiand@redhat.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat.com=
</a>>; <br>> To: David Li <<a
ymailto=3D"mailto:david_li@sbcglobal=
.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>>=
; <br>> Cc: <a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@o=
virt.org">users(a)ovirt.org</a> <<a
ymailto=3D"mailto:users@ovirt.org" hre=
f=3D"mailto:users@ovirt.org">users@ovirt.org</a>>;
<br>> Subject: Re:=
[Users] How to pxeboot ovrit node into memory<br>> automatically?
<br>&=
gt; Sent:
Wed, Dec 11, 2013 8:00:40 AM <br>> <br>> <br>> Am
Dienstag, den 1=
0.12.2013, 16:00 -0800 schrieb David Li:<br>> > Hi
Fabian,<br>> &g=
t; <br>> > <br>> > Does the stateless ovirt node
have the VDSM =
built-in? <br>> <br>> Hey David,<br>>
<br>> stateless is a feat=
ure or a special mode of oVirt Node which is also<br>> available on the =
"oVirt Node for oVirt Engine" image [1].<br>> But please note that
you w=
ill have to approve the Node in Engine after<br>> each reboot if you use=
the stateless feature. This bug [2] might also<br>> tackle the problem =
of a stateless Node.<br>> <br>> - fabian<br>>
<br>> --<br>> =
[1]<br>> http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.=
3-1.1.vdsm.fc19.iso<br>> [2] <a
href=3D"https://bugzilla.redhat.com/show=
_bug.cgi?id=3D875088"
target=3D"_blank">https://bugzilla.redhat.com/show_bu=
g.cgi?id=3D875088</a><br>> <br>> >
<br>> > David<br>> >=
;
<br>> > <br>>
><br>> ___________=
___________________________________________________<br>> >
&nbs=
p; From: Fabian Deutsch <<a
ymailto=3D"mailto:fabiand@redh=
at.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat.com</a>><br>&g=
t; > To: David Li <<a
ymailto=3D"mailto:da=
vid_li(a)sbcglobal.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcgl=
obal.net</a>> <br>> >
Cc: "<a ymailto=
=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.org=
</a>" <<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.=
org">users(a)ovirt.org</a>&gt; <br>> >
Sent:=
Thursday, December 5, 2013 11:47 PM<br>> >
 =
; Subject: Re: [Users] How to pxeboot ovrit node into memory<br>>
>&n=
bsp; automatically?<br>> >
&=
nbsp;
<br>> > <br>>
> =
Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb David
Li:<br>>=
; > > Hi
Fabian,<br>> > =
> <br>> >
> I think t=
he bad route is a link local route 169.254.0.0/16.<br>> >
 =
; I am not quite sure if it's a real bug but in my case I hav=
e<br>> > to remove this
route.<br>> >=
; > Also I am using ramdisk based node
withou=
t a local disk.<br>> Can<br>> >
anythin=
g be persisted? <br>> >
<br>> > =
; Hey David,<br>> >
<=
br>> > when you refer to
stateless mode, t=
hen no, nothing can be<br>> >
persisted.<br>> >
Regarding the bug - Ple=
ase provide the whole cmdline you are<br>> >
&nbs=
p; using to<br>> > boot the
node, to give =
me a chance to reproduce it.<br>> >
<br>&g=
t; > - fabian<br>>
>  =
; <br>> >
> David<br>> >&n=
bsp; > <br>> >
>=
; <br>> > >
<br>> > =
> ----- Original Message -----<br>>
> &=
nbsp; > > From: Fabian Deutsch <<a
ymailto=3D"mailto:fabian=
d(a)redhat.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat.com</a>>=
<br>> > > >
To: David Li <<a ymai=
lto=3D"mailto:david_li@sbcglobal.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><br>&=
gt; > > > Cc: "<a
ymailto=3D"mailto:use=
rs(a)ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.org</a>" <<a
y=
mailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovi=
rt.org</a>><br>> >
> > Sent: Wedn=
esday, December 4, 2013 11:17 AM<br>> >
&g=
t; > Subject: Re: [Users] How to pxeboot ovrit node into<br>>
memory<=
br>> >
automatically?<br>> > &=
nbsp; > > <br>> >
>=
> Am Montag, den 02.12.2013, 13:53 -0800 schrieb David Li:<br>>
>=
> >> Hi
Fabian,<br>> >&nbs=
p; > >> <br>>
> &nb=
sp; > >> Everytime the ovirt node boots up, it adds a
route<br>> entry<br>> >
that I have to=
<br>> > > >
manually remove. Otherw=
ise it messed up my routing. <br>> >
> =
>> How do I modify the boot scripts to
automatically<br>> re=
move<br>> >
it?<br>> > =
> > <br>> >
> > =
Hey David,<br>> > >
> <br>> >&=
nbsp; > > could you file a bug for that
route pr=
oblem?<br>> > >
> <br>> > =
; > > You can try the following
workaround:<br>&=
gt; > > >
<br>> > &n=
bsp; > > # Create /etc/rc.d/rc.local with the commands to
run<=
br>> > > > $ vi
/etc/rc.d/rc.local<br>> >
> > $ chm=
od a+x /etc/rc.d/rc.local<br>> >
> >=
$ persist /etc/rc.d/rc.local<br>> >
> =
> <br>> > >
> /etc/rc.d/rc.local =
should then be run on every boot.<br>> >
&=
gt; > <br>> >
> > - fabian<br>>=
; > > > <br>>
> &nbs=
p; > >> ----- Original Message
-----<br>> >&nbs=
p; > >> > From:
Fabian Deutsch <<=
a ymailto=3D"mailto:fabiand@redhat.com"
href=3D"mailto:fabiand@redhat.com">=
fabiand(a)redhat.com</a>&gt;<br>&gt; >
> >=
;> > To: David Li <<a
ymailto=3D"mailto:david_li@sbcglobal.n=
et"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><br>&=
gt; > >
>> > Cc: "<a ymailt=
o=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.or=
g</a>" <<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt=
.org">users(a)ovirt.org</a>&gt;<br>&gt; >
> =
>> > Sent: Monday, October 28, 2013 7:45
AM<br>> >&nbs=
p; > >> > Subject:
Re: [Users] How t=
o pxeboot ovrit node into<br>> >
memory <b=
r>> > > >
automatically?<br>> >=
; > >> >
<br>> > &=
nbsp; > >> > Am Montag, den
28.10.2013, 07:=
42 -0700 schrieb David<br>> >
Li:<br>> =
> > >>
>> <br>>
> > >>
>> Hi Fabi=
an,<br>> > >
>> >> <b=
r>> > >
>> >> Y=
es rootpwd worked too! Thanks.<br>> >
>=
>> >> <br>> >
> >=
> >> Two new problems:<br>>
>  =
; > >> >> <br>>
> &nb=
sp; > >> >> But I found there is no
networking f=
or the<br>> stateless<br>> >
node.<br>&=
gt; > >
>> >> What=
kernel boot options are used to either use<br>> DHCP<br>>
> =
or <br>> >
> >=
statically <br>> >
>
>> > configure the IP address for an interface on
the<br>&g=
t; node?<br>> > >
>> >&g=
t; <br>> > >
>> >>&nb=
sp; I also need to have the sshd enabled. Is there a<br>> >
&nb=
sp; kernel option <br>> >
&g=
t; > for that?<br>> >
> >>&nbs=
p; > <br>> >
> >> > H=
ey David,<br>> > >
>> > =
<br>> > >
>> > here you =
can find all the supported boot params in<br>> >
=
ovirt node:<br>> >
> >>&nb=
sp; > <br>> >
> ><br>> ><br=
> <a
href=3D"http://gerrit.ovirt.org/gitweb?p=3Dovirt-node.git;a=3Dblob;f...
ipts/ovirt-init-functions.sh.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7f303973=
3;hb=3DHEAD#l214"
target=3D"_blank">http://gerrit.ovirt.org/gitweb?p=3Dovir=
t-node.git;a=3Dblob;f=3Dscripts/ovirt-init-functions.sh.in;h=3Dc4280caefb89=
c77afc1e8bec8c925aa7f3039733;hb=3DHEAD#l214</a><br>> >
&=
nbsp; > >> > <br>>
> &nb=
sp; > >> > Greetings<br>>
> &nb=
sp; > >> > fabian<br>>
> =
> >> > <br>> >
> >=
;> >> David<br>> >
&g=
t; >> >> <br>> >
> &g=
t;> >> <br>> >
> >>=
; >> <br>> >
> >>&nbs=
p; >>
----- Original Message -----<br>> >
> =
>> >> > From: Fabian Deutsch
<<a ymailto=3D"m=
ailto:fabiand@redhat.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat=
.com</a>><br>> >
> >> &g=
t;> > To: David Li <<a
ymailto=3D"mailto:david_li@sbcglobal.=
net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><=
br>> > >
>> >> =
> Cc: "<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.=
org">users(a)ovirt.org</a>" <<a
ymailto=3D"mailto:users@ovirt.org" href=3D=
"mailto:users@ovirt.org">users@ovirt.org</a>><br>>
> =
> >> >>
> Sent: Friday, October=
25, 2013 9:10 AM<br>> >
> >>&nbs=
p; >> > Subject: Re: [Users] How to pxeboot ovrit
node<br>&g=
t;
> into memory <br>>
> &nb=
sp; > >> >
automatically?<br>> >  =
; > >> >>
> <br>> > =
> >>
>> > Am Freitag, d=
en 25.10.2013, 08:57 -0700 schrieb<br>> >
=
David Li:<br>> > >
>> >&=
gt; >> Hi Fabian,<br>> >
=
> >> >> >>
<br>> > &nb=
sp; > >> >>
>> That kernel op=
tion worked for me! The node is<br>> >
&nbs=
p; booted <br>> > >
> up in RAM. <br=
> > >
>> > Thanks!<br>&=
gt; >
> >>
>> >> <br>> >
> >=
> >> >> My next question
is:<br>> >&=
nbsp; > >>
>> >> How =
do I specify the root login and passwd as<br>> >
=
boot <br>> >
> > parameters? =
<br>> > >
>> >> =
> <br>> > >
>> >>=
> Hey David.<br>> >
> >>=
; >> > <br>> >
> &=
gt;> >> > Nice that it worked! Were you
able to reg=
ister to<br>> > the
<br>> > &n=
bsp; > > Engine?<br>> >
 =
; > >> >> >
<br>> >
> >> >>
> You can use the admi=
npw=3D and rootpw=3D kernel<br>> >
argumen=
ts to set <br>> > >
> <br>> >&=
nbsp; > >> >
passwords.<br>> >=
> >>
>> > use<br>=
> > >
>> >> >=
; $ openssl passwd -salt 42<br>> >
> &g=
t;> >> > to create one or two
passwords<br>> >=
; > >>
>> > <br>&g=
t; > > >>
>> > =
Greetings<br>> > >
>> >&=
gt; > fabian<br>> >
> >>=
>> > <br>> >
>
>> >> >>
David<br>> > &nbs=
p; > >> >>
>> <br>> >&=
nbsp; > >>
>> >> <br>=
> > >
>> >> >=
;> <br>> > >
>> >>=
>> <br>> >
> >> =
; >> >> ----- Original Message
-----<br>> >&n=
bsp; > >>
>> >> =
> From: Fabian Deutsch <<a
ymailto=3D"mailto:fabiand@redhat.com" hre=
f=3D"mailto:fabiand@redhat.com">fabiand@redhat.com</a>><br>>
>&nbs=
p; > >>
>> >> &=
gt; To: David Li <<a ymailto=3D"mailto:david_li@sbcglobal.net"
href=3D"m=
ailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><br>>
> > >>
>> >>=
; > Cc: "<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:user=
s@ovirt.org">users(a)ovirt.org</a>" <br>> >
=
> > <<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ov=
irt.org">users(a)ovirt.org</a>&gt;<br>&gt; >
&g=
t; >> >> >>
> Sent: Thursday, Octobe=
r 24, 2013 11:47 PM<br>> >
> >>&n=
bsp; >> >> > Subject: Re: [Users]
How to pxeboot=
ovrit<br>> > node
<br>> > &nb=
sp; > > into memory <br>>
> &=
nbsp; > >> >> >
automatically?<br>> >&n=
bsp; > >>
>> >> =
> <br>> > >
>>
>> >> > Am Donnerstag, den
24.10.2013, 16:26 -0=
700<br>> > schrieb
<br>> > &nb=
sp; > > David Li:<br>> >
&nbs=
p; > >> >>
>> >> Hi,<br>=
> > >
>> >> >=
;> >> <br>> >
> >>=
>> >>
>> I was following the ins=
tructions at <br>> >
> >> &=
gt;> > <a href=3D"http://www.ovirt.org/Node_PXE"
target=3D"_bla=
nk">http://www.ovirt.org/Node_PXE</a>;. My goal <br>>
> &=
nbsp; > >> >>
>> > is to u=
se pxeboot (iPXE) to boot the node<br>> >
=
entirely <br>> > >
> into RAM
<br>> > >
>> > with <br=
> > >
>> >> &g=
t; rootfs. What I
<br>> > >
>>&nb=
sp; >> >> > got now is an
installation screen wh=
ich<br>> > requires a
<br>> > =
> > local <br>>
> &nbs=
p; > >> > storage. My <br>>
> &=
nbsp; > >> >> > system has
<br>> > =
; > >>
>> >> &g=
t; no disk and this doesn't quite work for me. <br>> >
&=
nbsp; > >> >>
>> >> <br=
> > >
>> >> &g=
t;>
>> What's are the kernel parameters I need
<br>> > > >
to use to <br>> >=
> >> >
boot the <br>> >=
> >>
>> > node in=
to <br>> > >
>> >>&nb=
sp; >> > RAM automatically? I am OK as the first
step<=
br>> > with <br>>
> &nb=
sp; > > a <br>> >
> >&g=
t; > stateless node. <br>> >
>=
>> >> >> >
<br>> > &nbs=
p; > >> >>
>> > Hey=
David,<br>> > >
>> >>=
; >> > <br>> >
> &=
gt;> >> >> > the
stateless mode
is currently not<br>> >
completely <br>&g=
t; > > > working with
<br>> >&nbs=
p; > >> >
oVirt<br>> > &=
nbsp; > >> >>
>> > =
Engine. That means a Node needs to be<br>> >
&nbs=
p; approved <br>> >
> > each time it=
<br>> > >
>> > boots in=
to<br>> > >
>> >>&nbs=
p; >> > the stateless mode.<br>>
> =
> >> >>
>> > The stateles=
s mode can be entered by<br>> >
appending =
<br>> > > >
stateless to <br>> &g=
t; > >> >
the <br>>
> > >>
>> > de=
fault<br>> > >
>> >>&=
nbsp; >> > kernel arguments.<br>>
>  =
; > >> >>
>> > <br>> &g=
t; > >>
>> >>&n=
bsp; > Greetings<br>> >
> >>&n=
bsp; >> >> >
fabian<br>> > &n=
bsp; > >> >>
>> > <br>>=
> > >>
>> > <b=
r>> > >
>> > <br>> &g=
t; > > <br>>
> &=
nbsp; <br>> >
<br>> > &=
nbsp; <br>> >
<br>>
<br>> <br><br><br><br></div> </div>
</div> </blockquote></div> </div>=
</body></html>
--1013620071-1922147181-1386897821=:40672--
4:24 p.m.
---482694697-950170067-1387319042=:76127
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Hi Fabiand,=0A=0AI have a iSCSI partition on my stateless node. But the pro=
blem is I can't format the partition. The same partition can be formatted a=
nd mounted on a regular machine without problems.=A0=0A=0A[root@localhost ~=
]# mkfs.ext3 /dev/sda=0Amke2fs 1.42.7 (21-Jan-2013)=0A/dev/sda is entire de=
vice, not just one partition!=0AProceed anyway? (y,n) y=0A/dev/sda is appar=
ently in use by the system; will not make a filesystem here!=0A=0A=0AThe er=
ror message doesn't seem to make sense as the iSCSI partition isn't used by=
any other machine. =A0=0A=0AAny idea why this isn't working in a stateless=
node?=A0=0A=0ADavid=0A=0A=0A=0A>________________________________=0A> From:=
Fabian Deutsch <fabiand(a)redhat.com>=0A>To: David Li <david_li(a)sbcglobal.ne=
t> =0A>Cc: "users(a)ovirt.org" <users(a)ovirt.org> =0A>Sent:
Thursday, December=
12, 2013 7:40 AM=0A>Subject: Re: [Users] How to pxeboot ovrit node into me=
mory automatically?=0A> =0A>=0A>Am Mittwoch, den 11.12.2013, 17:32 -0800 sc=
hrieb David Li:=0A>> Hi Fabian,=0A>> =0A>> I booted the new node
stateless.=
But how can connect to it from ovirt=0A>> engine cli? The cli asks for thr=
ee things: URL, user name and=0A>> password. I am not sure how to put them =
on the kernel boot option=0A>> line.=0A>> =0A>> David=0A>>
=0A>> =0A>> =0A>=
=0A>Hey David,=0A>=0A>please take a look here to find the correct cmdline:=
=0A>https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_V=
irtualization/3.0/html/Hypervisor_Deployment_Guide/sect-Deployment_Guide-In=
stalling_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_Hypervisor_Kern=
el_Parameters_and_Automated_Installation.html=0A>=0A>- fabian=0A>=0A>>
=0A>=
______________________________________________________________________=0A=
> From: Fabian Deutsch <fabiand(a)redhat.com>; =0A>> To: David Li
<david_li@=
sbcglobal.net>; =0A>> Cc: users(a)ovirt.org
<users(a)ovirt.org>; =0A>> Subject:=
Re: [Users] How to pxeboot ovrit node into memory=0A>> automatically? =0A>=
Sent: Wed, Dec 11, 2013 8:00:40 AM =0A>> =0A>>
=0A>> Am Dienstag, den 10.=
12.2013, 16:00 -0800 schrieb David Li:=0A>>
> Hi Fabian,=0A>> > =0A>> > =0A=
> > Does the stateless ovirt node have the VDSM built-in?
=0A>> =0A>> Hey =
David,=0A>> =0A>> stateless is a feature
or a special mode of oVirt Node wh=
ich is also=0A>> available on the "oVirt Node for oVirt Engine" image
[1].=
=0A>> But please note that you will have to approve the Node in Engine afte=
r=0A>> each reboot if you use the stateless feature. This bug [2] might als=
o=0A>> tackle the problem of a stateless Node.=0A>> =0A>> -
fabian=0A>> =0A=
> --=0A>> [1]=0A>>
http://resources.ovirt.org/releases/3.3/iso/ovirt-node-=
iso-3.0.3-1.1.vdsm.fc19.iso=0A>> [2] https://bugzilla.redhat.com/show_bug.c=
gi?id=3D875088=0A>> =0A>> > =0A>> > David=0A>> >
=0A>> >=A0 =A0 =A0 =A0 =0A=
> >=0A>>
______________________________________________________________=0A=
> >=A0 =A0 =A0 =A0 From: Fabian Deutsch <fabiand(a)redhat.com>=0A>>
>=A0 =A0=
=A0 =A0 To: David Li <david_li(a)sbcglobal.net> =0A>>
>=A0 =A0 =A0 =A0 Cc: "=
users(a)ovirt.org" <users(a)ovirt.org> =0A>> >=A0 =A0 =A0 =A0 Sent:
Thursday, D=
ecember 5, 2013 11:47 PM=0A>> >=A0 =A0 =A0 =A0 Subject: Re: [Users] How to =
pxeboot ovrit node into memory=0A>> >=A0 =A0 =A0 =A0 automatically?=0A>>
>=
=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0 Am
Donnerstag=
, den 05.12.2013, 16:30 -0800 schrieb David Li:=0A>> >=A0 =A0 =A0 =A0 > Hi =
Fabian,=0A>> >=A0 =A0 =A0 =A0 > =0A>> >=A0 =A0 =A0 =A0 > I think
the bad ro=
ute is a link local route 169.254.0.0/16.=0A>> >=A0 =A0 =A0 =A0 I am not qu=
ite sure if it's a real bug but in my case I have=0A>> >=A0 =A0 =A0 =A0 to =
remove this route.=0A>> >=A0 =A0 =A0 =A0 > Also I am using ramdisk based no=
de without a local disk.=0A>> Can=0A>> >=A0 =A0 =A0 =A0 anything be
persist=
ed? =0A>> >=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0 Hey David,=0A>>
>=A0 =A0 =
=A0 =A0 =0A>> >=A0 =A0 =A0 =A0 when you refer to stateless mode, then no, n=
othing can be=0A>> >=A0 =A0 =A0 =A0 persisted.=0A>> >=A0 =A0 =A0 =A0
Regard=
ing the bug - Please provide the whole cmdline you are=0A>> >=A0 =A0 =A0 =
=A0 using to=0A>> >=A0 =A0 =A0 =A0 boot the node, to give me a chance to re=
produce it.=0A>> >=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0 -
fabian=0A>> >=A0=
=A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0 > David=0A>> >=A0 =A0 =A0 =A0
> =0A>> >=
=A0 =A0 =A0 =A0 > =0A>> >=A0 =A0 =A0 =A0 > =0A>> >=A0 =A0 =A0 =A0
> ----- O=
riginal Message -----=0A>> >=A0 =A0 =A0 =A0 > > From: Fabian Deutsch
<fabia=
nd(a)redhat.com>=0A>> >=A0 =A0 =A0 =A0 > > To: David Li
<david_li(a)sbcglobal.n=
et>=0A>> >=A0 =A0 =A0 =A0 > > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>=0A>> =
=A0 =A0 =A0 =A0 > > Sent: Wednesday, December 4, 2013 11:17
AM=0A>> >=A0 =
=A0 =A0 =A0 > > Subject: Re: [Users] How to pxeboot
ovrit node into=0A>> me=
mory=0A>> >=A0 =A0 =A0 =A0 automatically?=0A>> >=A0 =A0 =A0 =A0 >
> =0A>> >=
=A0 =A0 =A0 =A0 > > Am Montag, den 02.12.2013, 13:53 -0800 schrieb David Li=
:=0A>> >=A0 =A0 =A0 =A0 > >>=A0 Hi Fabian,=0A>> >=A0 =A0 =A0
=A0 > >> =0A>>=
=A0 =A0 =A0 =A0 > >>=A0 Everytime the ovirt node boots up, it
adds a rout=
e=0A>> entry=0A>> >=A0 =A0 =A0 =A0 that I have to
=0A>> >=A0 =A0 =A0 =A0 > =
manually remove. Otherwise it messed up my routing. =0A>>
>=A0 =A0 =A0 =
=A0 > >>=A0 How do I modify the boot scripts to
automatically=0A>> remove=
=0A>> >=A0 =A0 =A0 =A0 it?=0A>> >=A0 =A0 =A0 =A0 > > =0A>>
>=A0 =A0 =A0 =A0=
> Hey David,=0A>> >=A0 =A0 =A0 =A0 > > =0A>>
>=A0 =A0 =A0 =A0 > > could =
you file a bug for that route
problem?=0A>> >=A0 =A0 =A0 =A0 > > =0A>> >=A0=
=A0 =A0 =A0 > > You can try the following workaround:=0A>> >=A0 =A0 =A0 =
=A0 > > =0A>> >=A0 =A0 =A0 =A0 > > # Create /etc/rc.d/rc.local with
the com=
mands to run=0A>> >=A0 =A0 =A0 =A0 > > $ vi /etc/rc.d/rc.local=0A>>
>=A0 =
=A0 =A0 =A0 > > $ chmod a+x /etc/rc.d/rc.local=0A>> >=A0 =A0 =A0 =A0 >
> $ =
persist /etc/rc.d/rc.local=0A>> >=A0 =A0 =A0 =A0 > > =0A>> >=A0
=A0 =A0 =A0=
> /etc/rc.d/rc.local should then be run on every boot.=0A>>
>=A0 =A0 =A0=
=A0 > > =0A>> >=A0 =A0 =A0 =A0 > > -
fabian=0A>> >=A0 =A0 =A0 =A0 > > =0A>=
>=A0 =A0 =A0 =A0 > >>=A0 ----- Original Message
-----=0A>> >=A0 =A0 =A0 =
=A0 > >>=A0 > From: Fabian Deutsch
<fabiand(a)redhat.com>=0A>> >=A0 =A0 =A0 =
=A0 > >>=A0 > To: David Li <david_li(a)sbcglobal.net>=0A>> >=A0
=A0 =A0 =A0 >=
>=A0 > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>=0A>> >=A0 =A0 =A0 =A0 > >>=
=A0 > Sent:
Monday, October 28, 2013 7:45 AM=0A>> >=A0 =A0 =A0 =A0 > >>=A0 =
Subject: Re: [Users] How to pxeboot ovrit node into=0A>>
>=A0 =A0 =A0 =A0=
memory =0A>> >=A0 =A0 =A0 =A0 > >
automatically?=0A>> >=A0 =A0 =A0 =A0 > >=
=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 > Am
Montag, den 28.10.2013, 07:42 -0=
700 schrieb David=0A>> >=A0 =A0 =A0 =A0
Li:=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >=
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 Hi
Fabian,=0A>> >=A0 =A0 =A0 =A0 > >=
=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 Yes rootpwd
worked too! Thanks=
.=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 Two=
new problems:=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >> =0A>>
>=A0 =A0 =A0 =A0 > >>=
=A0 >>=A0 But I found there is no networking for the=0A>> stateless=0A>>
>=
=A0 =A0 =A0 =A0 node.=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 What
kernel boot =
options are used to either use=0A>> DHCP=0A>> >=A0 =A0 =A0 =A0 or
=0A>> >=
=A0 =A0 =A0 =A0 > > statically =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >
configure t=
he IP address for an interface on the=0A>> node?=0A>> >=A0 =A0 =A0 =A0 >
>>=
=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 I also need to
have the sshd en=
abled. Is there a=0A>> >=A0 =A0 =A0 =A0 kernel option =0A>> >=A0 =A0 =A0
=
=A0 > > for that?=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > =0A>>
>=A0 =A0 =A0 =A0 > =
>=A0 > Hey David,=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 > =0A>> >=A0 =A0 =A0 =A0 >=
>=A0 > here you can find all the supported boot params in=0A>> >=A0 =A0 =
=A0 =A0 ovirt node:=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > =0A>>
>=A0 =A0 =A0 =A0 =
f=3Dscripts/ovirt-init-functions.sh.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7=
f3039733;hb=3DHEAD#l214=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > =0A>>
>=A0 =A0 =A0 =
=A0 > >>=A0 > Greetings=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >
fabian=0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 David=0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>> =0A>> >=A0 =A0 =A0=
=A0 > >>=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 ----- Original Message=
-----=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > From: Fabian
Deutsch <fabiand@=
redhat.com>=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > To: David
Li <david_li@sb=
cglobal.net>=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > Cc:
"users(a)ovirt.org" <u=
sers(a)ovirt.org>=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > Sent:
Friday, October=
25, 2013 9:10 AM=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >
Subject: Re: [Users=
] How to pxeboot ovrit node=0A>> >=A0 =A0 =A0 =A0 into memory =0A>> >=A0
=
=A0 =A0 =A0 > >>=A0 > automatically?=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 > =
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > Am Freitag, den
25.10.2013, 08:57 -0=
700 schrieb=0A>> >=A0 =A0 =A0 =A0 David Li:=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >=
=A0 >>=A0 Hi Fabian,=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >> =0A>> >=A0 =A0=
=A0 =A0 > >>=A0
>>=A0 >>=A0 That kernel option worked for me!=A0 The node =
is=0A>> >=A0 =A0 =A0 =A0 booted =0A>> >=A0 =A0 =A0 =A0 > > up in
RAM. =0A>>=
=A0 =A0 =A0 =A0 > >>=A0 > Thanks!=0A>> >=A0 =A0
=A0 =A0 > >>=A0 >>=A0 >> =
=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >>=A0 My next question is:=0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 >>=A0 >> How do I specify the root login and
passwd as=
=0A>> >=A0 =A0 =A0 =A0 boot =0A>> >=A0 =A0 =A0 =A0 > > parameters?
=0A>> >=
=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 > Hey =
David.=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > =0A>>
>=A0 =A0 =A0 =A0 > >>=A0=
>=A0 > Nice that it worked! Were you able to register
to=0A>> >=A0 =A0 =
=A0 =A0 the =0A>> >=A0 =A0 =A0 =A0 > >
Engine?=0A>> >=A0 =A0 =A0 =A0 > >>=
=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > You
can use the adminpw=
=3D and rootpw=3D kernel=0A>> >=A0 =A0 =A0 =A0 arguments to set =0A>>
>=A0 =
=A0 =A0 =A0 > > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >
passwords.=0A>> >=A0 =A0 =
=A0 =A0 > >>=A0 >>=A0 > use=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 > $ openssl=
passwd -salt 42=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > to
create one or two=
passwords=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > =0A>>
>=A0 =A0 =A0 =A0 > >=
=A0 >>=A0 > Greetings=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 > fabian=0A>> >=
=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 =
David=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >> =0A>>
>=A0 =A0 =A0 =A0 > >>=A0=
>=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 >> =0A>> >=A0 =A0 =A0 =A0 > =
>=A0 >>=A0 >> =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 ----- Original Me=
ssage -----=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >>=A0 > From: Fabian Deutsc=
h <fabiand(a)redhat.com>=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 > To: Davi=
d Li <david_li(a)sbcglobal.net>=0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 >>=A0 > C=
c: "users(a)ovirt.org" =0A>> >=A0 =A0 =A0 =A0 > >
<users(a)ovirt.org>=0A>> >=A0=
=A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 > Sent: Thursday, October 24,
2013 11:47 P=
M=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 > Subject:
Re: [Users] How to p=
xeboot ovrit=0A>> >=A0 =A0 =A0 =A0 node =0A>> >=A0 =A0 =A0 =A0 > >
into mem=
ory =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >
automatically?=0A>> >=A0 =A0 =A0=
=A0 > >>=A0 >>=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >>=A0 > Am =
Donnerstag, den 24.10.2013, 16:26 -0700=0A>> >=A0 =A0 =A0 =A0 schrieb
=0A>>=
=A0 =A0 =A0 =A0 > > David Li:=0A>> >=A0 =A0 =A0 =A0
> >>=A0 >>=A0 >>=A0 >=
=A0 Hi,=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 >>
=0A>> >=A0 =A0 =A0 =
=A0 > >>=A0 >>=A0 >>=A0
>>=A0 I was following the instructions at =0A>> >=
=A0 =A0 =A0 =A0 > >>=A0 >>=A0 > http://www.ovirt.org/Node_PXE. My goal
=0A>=
>=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 > is
to use pxeboot (iPXE) to boot t=
he node=0A>> >=A0 =A0 =A0 =A0 entirely
=0A>> >=A0 =A0 =A0 =A0 > > into RAM =
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > with =0A>> >=A0 =A0 =A0 =A0
> >>=A0 >>=A0 =
rootfs. What I =0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 >>=A0 > got now is an=
installation screen which=0A>>
>=A0 =A0 =A0 =A0 requires a =0A>> >=A0 =A0 =
=A0 =A0 > > local =0A>> >=A0 =A0 =A0 =A0 > >>=A0 > storage. My
=0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 >>=A0 > system has =0A>> >=A0 =A0 =A0 =A0
> >>=A0 >>=A0=
>=A0 > no disk and this doesn't quite work for me.
=0A>> >=A0 =A0 =A0 =A0=
>>=A0 >>=A0 >>=A0 >> =0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >>=A0 >>=A0 Wh=
at's are the kernel
parameters I need =0A>> >=A0 =A0 =A0 =A0 > > to use to =
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > boot the =0A>> >=A0 =A0 =A0
=A0 > >>=A0 >>=
=A0 > node into =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 > RAM automatica=
lly?=A0 I am OK as the first step=0A>> >=A0 =A0 =A0 =A0 with =0A>> >=A0
=A0=
=A0 =A0 > > a =0A>> >=A0 =A0 =A0 =A0 > >>=A0 > stateless node.
=0A>> >=A0 =
=A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0
> >>=A0 >>=A0 >>=
=A0 > Hey David,=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0
>>=A0 > =0A>> >=A0 =A0=
=A0 =A0 > >>=A0 >>=A0 >>=A0 > the stateless mode is currently
not=0A>> >=
=A0 =A0 =A0 =A0 completely =0A>> >=A0 =A0 =A0 =A0 > > working with
=0A>> >=
=A0 =A0 =A0 =A0 > >>=A0 > oVirt=0A>> >=A0 =A0 =A0 =A0 >
>>=A0 >>=A0 >>=A0 >=
Engine. That means a Node needs to be=0A>> >=A0 =A0 =A0 =A0 approved
=0A>>=
=A0 =A0 =A0 =A0 > > each time it =0A>> >=A0 =A0 =A0 =A0
> >>=A0 > boots i=
nto=0A>> >=A0 =A0 =A0 =A0 > >>=A0
>>=A0 >>=A0 > the stateless mode.=0A>> >=
=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 > The stateless mode can be
entered by=
=0A>> >=A0 =A0 =A0 =A0 appending =0A>> >=A0 =A0 =A0 =A0 > >
stateless to =
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 > the =0A>> >=A0 =A0 =A0 =A0
> >>=A0 >>=A0 >=
default=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 >
kernel arguments.=0A>>=
=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 >
=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=
=A0 >>=A0 >
Greetings=0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=A0 >>=A0 >
fabian=0A=
>>=A0 =A0 =A0 =A0 > >>=A0
>>=A0 >>=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 >>=
=A0 > =0A>> >=A0 =A0 =A0 =A0 > >>=A0 > =0A>> >=A0
=A0 =A0 =A0 > > =0A>> >=
=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0 =0A>> >=A0 =A0 =A0 =A0
=0A>> >=A0 =
=A0 =A0 =A0 =0A>> =0A>> =0A>=0A>=0A>=0A>
---482694697-950170067-1387319042=:76127
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"color:#000; background-color:#fff;
font-family:ti=
mes new roman, new york, times, serif;font-size:12pt"><div
style=3D"font-fa=
mily: 'times new roman', 'new york', times, serif; font-size:
12pt;"><span>=
Hi Fabiand,</span></div><div style=3D"font-family: 'times new
roman', 'new =
york', times, serif; font-size: 16px; color: rgb(0, 0, 0); background-color=
: transparent; font-style:
normal;"><span><br></span></div><div style=3D"fo=
nt-family: 'times new roman', 'new york', times, serif; font-size: 16px;
co=
lor: rgb(0, 0, 0); background-color: transparent; font-style: normal;"><spa=
n>I have a iSCSI partition on my stateless node. But the problem is I can't=
format the partition. The same partition can be formatted and mounted on a=
regular machine without problems. </span></div><div
style=3D"font-fam=
ily: 'times new roman', 'new york', times, serif; font-size: 16px; color:
r=
gb(0, 0, 0); background-color: transparent; font-style:
normal;"><span><br></span></div><div
style=3D"background-color: transparen=
t;">[root@localhost ~]# mkfs.ext3 /dev/sda</div><div
style=3D"background-co=
lor: transparent;">mke2fs 1.42.7 (21-Jan-2013)</div><div
style=3D"backgroun=
d-color: transparent;">/dev/sda is entire device, not just one partition!</=
div><div style=3D"background-color: transparent;">Proceed anyway? (y,n)
y</=
div><div style=3D"background-color:
transparent;"><span></span></div><div s=
tyle=3D"background-color: transparent;">/dev/sda is apparently in use by th=
e system; will not make a filesystem here!</div><div
style=3D"background-co=
lor: transparent;"><br></div><div style=3D"background-color:
transparent; c=
olor: rgb(0, 0, 0); font-size: 16px; font-family: 'times new roman', 'new y=
ork', times, serif; font-style: normal;"><br></div><div
style=3D"background=
-color: transparent; color: rgb(0, 0, 0); font-size: 16px; font-family: 'ti=
mes new roman', 'new york', times, serif; font-style: normal;">The
error me=
ssage
doesn't seem to make sense as the iSCSI partition isn't used by any other =
machine. </div><div style=3D"background-color: transparent; color:
rg=
b(0, 0, 0); font-size: 16px; font-family: 'times new roman', 'new york',
ti=
mes, serif; font-style: normal;"><br></div><div
style=3D"background-color: =
transparent; color: rgb(0, 0, 0); font-size: 16px; font-family: 'times new =
roman', 'new york', times, serif; font-style: normal;">Any idea why
this is=
n't working in a stateless node? </div><div
style=3D"background-color:=
transparent; color: rgb(0, 0, 0); font-size: 16px; font-family: 'times new=
roman', 'new york', times, serif; font-style:
normal;"><br></div><div styl=
e=3D"background-color: transparent; color: rgb(0, 0, 0); font-size: 16px; f=
ont-family: 'times new roman', 'new york', times, serif; font-style:
normal=
;">David</div><div style=3D"font-family: 'times new roman',
'new york', tim=
es, serif; font-size: 12pt;"><br><blockquote style=3D"border-left:
2px soli=
d
rgb(16, 16, 255); margin-left: 5px; margin-top: 5px; padding-left: 5px;"> =
<div style=3D"font-family: 'times new roman', 'new york', times,
serif; fo=
nt-size: 12pt;"> <div style=3D"font-family: 'times new roman',
'new york', =
times, serif; font-size: 12pt;"> <div dir=3D"ltr"> <hr
size=3D"1"> <font s=
ize=3D"2" face=3D"Arial"> <b><span
style=3D"font-weight:bold;">From:</span>=
</b> Fabian Deutsch &lt;fabiand(a)redhat.com&gt;<br> <b><span
style=3D"font-w=
eight: bold;">To:</span></b> David Li
&lt;david_li(a)sbcglobal.net&gt; <br><b=
<span style=3D"font-weight:
bold;">Cc:</span></b> "users(a)ovirt.org" <us=
ers(a)ovirt.org&gt; <br> <b><span style=3D"font-weight:
bold;">Sent:</span></=
b> Thursday, December 12, 2013 7:40 AM<br> <b><span
style=3D"font-weight: b=
old;">Subject:</span></b> Re: [Users] How to pxeboot ovrit node into
memory=
automatically?<br> </font> </div> <div
class=3D"y_msg_container"><br>=0AAm=
Mittwoch, den 11.12.2013, 17:32 -0800 schrieb David Li:<br>> Hi Fabian,=
<br>> <br>> I booted the new node stateless. But how can connect
to i=
t from ovirt<br>> engine cli? The cli asks for three things: URL, user n=
ame and<br>> password. I am not sure how to put them on the kernel boot =
option<br>> line.<br>> <br>>
David<br>> <br>> <br>> <br><=
br>Hey David,<br><br>please take a look here to find the correct
cmdline:<b=
r><a href=3D"https://access.redhat.com/site/documentation/en-US/Red_Hat_Ent=
erprise_Virtualization/3.0/html/Hypervisor_Deployment_Guide/sect-Deployment=
_Guide-Installing_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_Hyperv=
isor_Kernel_Parameters_and_Automated_Installation.html"
target=3D"_blank">https://access.redhat.com/site/documentati...
at_Enterprise_Virtualization/3.0/html/Hypervisor_Deployment_Guide/sect-Depl=
oyment_Guide-Installing_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_=
Hypervisor_Kernel_Parameters_and_Automated_Installation.html</a><br><br>-
f=
abian<br><br>> <br>>
________________________________________________=
______________________<br>> From: Fabian Deutsch <<a
ymailto=3D"mailt=
o:fabiand@redhat.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat.com=
</a>>; <br>> To: David Li <<a
ymailto=3D"mailto:david_li@sbcglobal=
.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>>=
; <br>> Cc: <a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@o=
virt.org">users(a)ovirt.org</a> <<a
ymailto=3D"mailto:users@ovirt.org" hre=
f=3D"mailto:users@ovirt.org">users@ovirt.org</a>>;
<br>> Subject: Re:=
[Users] How to pxeboot ovrit node into memory<br>> automatically?
<br>&=
gt; Sent:
Wed, Dec 11, 2013 8:00:40 AM <br>> <br>> <br>> Am
Dienstag, den 1=
0.12.2013, 16:00 -0800 schrieb David Li:<br>> > Hi
Fabian,<br>> &g=
t; <br>> > <br>> > Does the stateless ovirt node
have the VDSM =
built-in? <br>> <br>> Hey David,<br>>
<br>> stateless is a feat=
ure or a special mode of oVirt Node which is also<br>> available on the =
"oVirt Node for oVirt Engine" image [1].<br>> But please note that
you w=
ill have to approve the Node in Engine after<br>> each reboot if you use=
the stateless feature. This bug [2] might also<br>> tackle the problem =
of a stateless Node.<br>> <br>> - fabian<br>>
<br>> --<br>> =
[1]<br>> http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.=
3-1.1.vdsm.fc19.iso<br>> [2] <a
href=3D"https://bugzilla.redhat.com/show=
_bug.cgi?id=3D875088"
target=3D"_blank">https://bugzilla.redhat.com/show_bu=
g.cgi?id=3D875088</a><br>> <br>> >
<br>> > David<br>> >=
;
<br>> > <br>>
><br>> ___________=
___________________________________________________<br>> >
&nbs=
p; From: Fabian Deutsch <<a
ymailto=3D"mailto:fabiand@redh=
at.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat.com</a>><br>&g=
t; > To: David Li <<a
ymailto=3D"mailto:da=
vid_li(a)sbcglobal.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcgl=
obal.net</a>> <br>> >
Cc: "<a ymailto=
=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.org=
</a>" <<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.=
org">users(a)ovirt.org</a>&gt; <br>> >
Sent:=
Thursday, December 5, 2013 11:47 PM<br>> >
 =
; Subject: Re: [Users] How to pxeboot ovrit node into memory<br>>
>&n=
bsp; automatically?<br>> >
&=
nbsp;
<br>> > <br>>
> =
Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb David
Li:<br>>=
; > > Hi
Fabian,<br>> > =
> <br>> >
> I think t=
he bad route is a link local route 169.254.0.0/16.<br>> >
 =
; I am not quite sure if it's a real bug but in my case I hav=
e<br>> > to remove this
route.<br>> >=
; > Also I am using ramdisk based node
withou=
t a local disk.<br>> Can<br>> >
anythin=
g be persisted? <br>> >
<br>> > =
; Hey David,<br>> >
<=
br>> > when you refer to
stateless mode, t=
hen no, nothing can be<br>> >
persisted.<br>> >
Regarding the bug - Ple=
ase provide the whole cmdline you are<br>> >
&nbs=
p; using to<br>> > boot the
node, to give =
me a chance to reproduce it.<br>> >
<br>&g=
t; > - fabian<br>>
>  =
; <br>> >
> David<br>> >&n=
bsp; > <br>> >
>=
; <br>> > >
<br>> > =
> ----- Original Message -----<br>>
> &=
nbsp; > > From: Fabian Deutsch <<a
ymailto=3D"mailto:fabian=
d(a)redhat.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat.com</a>>=
<br>> > > >
To: David Li <<a ymai=
lto=3D"mailto:david_li@sbcglobal.net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><br>&=
gt; > > > Cc: "<a
ymailto=3D"mailto:use=
rs(a)ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.org</a>" <<a
y=
mailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovi=
rt.org</a>><br>> >
> > Sent: Wedn=
esday, December 4, 2013 11:17 AM<br>> >
&g=
t; > Subject: Re: [Users] How to pxeboot ovrit node into<br>>
memory<=
br>> >
automatically?<br>> > &=
nbsp; > > <br>> >
>=
> Am Montag, den 02.12.2013, 13:53 -0800 schrieb David Li:<br>>
>=
> >> Hi
Fabian,<br>> >&nbs=
p; > >> <br>>
> &nb=
sp; > >> Everytime the ovirt node boots up, it adds a
route<br>> entry<br>> >
that I have to=
<br>> > > >
manually remove. Otherw=
ise it messed up my routing. <br>> >
> =
>> How do I modify the boot scripts to
automatically<br>> re=
move<br>> >
it?<br>> > =
> > <br>> >
> > =
Hey David,<br>> > >
> <br>> >&=
nbsp; > > could you file a bug for that
route pr=
oblem?<br>> > >
> <br>> > =
; > > You can try the following
workaround:<br>&=
gt; > > >
<br>> > &n=
bsp; > > # Create /etc/rc.d/rc.local with the commands to
run<=
br>> > > > $ vi
/etc/rc.d/rc.local<br>> >
> > $ chm=
od a+x /etc/rc.d/rc.local<br>> >
> >=
$ persist /etc/rc.d/rc.local<br>> >
> =
> <br>> > >
> /etc/rc.d/rc.local =
should then be run on every boot.<br>> >
&=
gt; > <br>> >
> > - fabian<br>>=
; > > > <br>>
> &nbs=
p; > >> ----- Original Message
-----<br>> >&nbs=
p; > >> > From:
Fabian Deutsch <<=
a ymailto=3D"mailto:fabiand@redhat.com"
href=3D"mailto:fabiand@redhat.com">=
fabiand(a)redhat.com</a>&gt;<br>&gt; >
> >=
;> > To: David Li <<a
ymailto=3D"mailto:david_li@sbcglobal.n=
et"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><br>&=
gt; > >
>> > Cc: "<a ymailt=
o=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.org">users@ovirt.or=
g</a>" <<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt=
.org">users(a)ovirt.org</a>&gt;<br>&gt; >
> =
>> > Sent: Monday, October 28, 2013 7:45
AM<br>> >&nbs=
p; > >> > Subject:
Re: [Users] How t=
o pxeboot ovrit node into<br>> >
memory <b=
r>> > > >
automatically?<br>> >=
; > >> >
<br>> > &=
nbsp; > >> > Am Montag, den
28.10.2013, 07:=
42 -0700 schrieb David<br>> >
Li:<br>> =
> > >>
>> <br>>
> > >>
>> Hi Fabi=
an,<br>> > >
>> >> <b=
r>> > >
>> >> Y=
es rootpwd worked too! Thanks.<br>> >
>=
>> >> <br>> >
> >=
> >> Two new problems:<br>>
>  =
; > >> >> <br>>
> &nb=
sp; > >> >> But I found there is no
networking f=
or the<br>> stateless<br>> >
node.<br>&=
gt; > >
>> >> What=
kernel boot options are used to either use<br>> DHCP<br>>
> =
or <br>> >
> >=
statically <br>> >
>
>> > configure the IP address for an interface on
the<br>&g=
t; node?<br>> > >
>> >&g=
t; <br>> > >
>> >>&nb=
sp; I also need to have the sshd enabled. Is there a<br>> >
&nb=
sp; kernel option <br>> >
&g=
t; > for that?<br>> >
> >>&nbs=
p; > <br>> >
> >> > H=
ey David,<br>> > >
>> > =
<br>> > >
>> > here you =
can find all the supported boot params in<br>> >
=
ovirt node:<br>> >
> >>&nb=
sp; > <br>> >
> ><br>> ><br=
> <a
href=3D"http://gerrit.ovirt.org/gitweb?p=3Dovirt-node.git;a=3Dblob;f...
ipts/ovirt-init-functions.sh.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7f303973=
3;hb=3DHEAD#l214"
target=3D"_blank">http://gerrit.ovirt.org/gitweb?p=3Dovir=
t-node.git;a=3Dblob;f=3Dscripts/ovirt-init-functions.sh.in;h=3Dc4280caefb89=
c77afc1e8bec8c925aa7f3039733;hb=3DHEAD#l214</a><br>> >
&=
nbsp; > >> > <br>>
> &nb=
sp; > >> > Greetings<br>>
> &nb=
sp; > >> > fabian<br>>
> =
> >> > <br>> >
> >=
;> >> David<br>> >
&g=
t; >> >> <br>> >
> &g=
t;> >> <br>> >
> >>=
; >> <br>> >
> >>&nbs=
p; >>
----- Original Message -----<br>> >
> =
>> >> > From: Fabian Deutsch
<<a ymailto=3D"m=
ailto:fabiand@redhat.com"
href=3D"mailto:fabiand@redhat.com">fabiand@redhat=
.com</a>><br>> >
> >> &g=
t;> > To: David Li <<a
ymailto=3D"mailto:david_li@sbcglobal.=
net"
href=3D"mailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><=
br>> > >
>> >> =
> Cc: "<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ovirt.=
org">users(a)ovirt.org</a>" <<a
ymailto=3D"mailto:users@ovirt.org" href=3D=
"mailto:users@ovirt.org">users@ovirt.org</a>><br>>
> =
> >> >>
> Sent: Friday, October=
25, 2013 9:10 AM<br>> >
> >>&nbs=
p; >> > Subject: Re: [Users] How to pxeboot ovrit
node<br>&g=
t;
> into memory <br>>
> &nb=
sp; > >> >
automatically?<br>> >  =
; > >> >>
> <br>> > =
> >>
>> > Am Freitag, d=
en 25.10.2013, 08:57 -0700 schrieb<br>> >
=
David Li:<br>> > >
>> >&=
gt; >> Hi Fabian,<br>> >
=
> >> >> >>
<br>> > &nb=
sp; > >> >>
>> That kernel op=
tion worked for me! The node is<br>> >
&nbs=
p; booted <br>> > >
> up in RAM. <br=
> > >
>> > Thanks!<br>&=
gt; >
> >>
>> >> <br>> >
> >=
> >> >> My next question
is:<br>> >&=
nbsp; > >>
>> >> How =
do I specify the root login and passwd as<br>> >
=
boot <br>> >
> > parameters? =
<br>> > >
>> >> =
> <br>> > >
>> >>=
> Hey David.<br>> >
> >>=
; >> > <br>> >
> &=
gt;> >> > Nice that it worked! Were you
able to reg=
ister to<br>> > the
<br>> > &n=
bsp; > > Engine?<br>> >
 =
; > >> >> >
<br>> >
> >> >>
> You can use the admi=
npw=3D and rootpw=3D kernel<br>> >
argumen=
ts to set <br>> > >
> <br>> >&=
nbsp; > >> >
passwords.<br>> >=
> >>
>> > use<br>=
> > >
>> >> >=
; $ openssl passwd -salt 42<br>> >
> &g=
t;> >> > to create one or two
passwords<br>> >=
; > >>
>> > <br>&g=
t; > > >>
>> > =
Greetings<br>> > >
>> >&=
gt; > fabian<br>> >
> >>=
>> > <br>> >
>
>> >> >>
David<br>> > &nbs=
p; > >> >>
>> <br>> >&=
nbsp; > >>
>> >> <br>=
> > >
>> >> >=
;> <br>> > >
>> >>=
>> <br>> >
> >> =
; >> >> ----- Original Message
-----<br>> >&n=
bsp; > >>
>> >> =
> From: Fabian Deutsch <<a
ymailto=3D"mailto:fabiand@redhat.com" hre=
f=3D"mailto:fabiand@redhat.com">fabiand@redhat.com</a>><br>>
>&nbs=
p; > >>
>> >> &=
gt; To: David Li <<a ymailto=3D"mailto:david_li@sbcglobal.net"
href=3D"m=
ailto:david_li@sbcglobal.net">david_li@sbcglobal.net</a>><br>>
> > >>
>> >>=
; > Cc: "<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:user=
s@ovirt.org">users(a)ovirt.org</a>" <br>> >
=
> > <<a ymailto=3D"mailto:users@ovirt.org"
href=3D"mailto:users@ov=
irt.org">users(a)ovirt.org</a>&gt;<br>&gt; >
&g=
t; >> >> >>
> Sent: Thursday, Octobe=
r 24, 2013 11:47 PM<br>> >
> >>&n=
bsp; >> >> > Subject: Re: [Users]
How to pxeboot=
ovrit<br>> > node
<br>> > &nb=
sp; > > into memory <br>>
> &=
nbsp; > >> >> >
automatically?<br>> >&n=
bsp; > >>
>> >> =
> <br>> > >
>>
>> >> > Am Donnerstag, den
24.10.2013, 16:26 -0=
700<br>> > schrieb
<br>> > &nb=
sp; > > David Li:<br>> >
&nbs=
p; > >> >>
>> >> Hi,<br>=
> > >
>> >> >=
;> >> <br>> >
> >>=
>> >>
>> I was following the ins=
tructions at <br>> >
> >> &=
gt;> > <a href=3D"http://www.ovirt.org/Node_PXE"
target=3D"_bla=
nk">http://www.ovirt.org/Node_PXE</a>;. My goal <br>>
> &=
nbsp; > >> >>
>> > is to u=
se pxeboot (iPXE) to boot the node<br>> >
=
entirely <br>> > >
> into RAM
<br>> > >
>> > with <br=
> > >
>> >> &g=
t; rootfs. What I
<br>> > >
>>&nb=
sp; >> >> > got now is an
installation screen wh=
ich<br>> > requires a
<br>> > =
> > local <br>>
> &nbs=
p; > >> > storage. My <br>>
> &=
nbsp; > >> >> > system has
<br>> > =
; > >>
>> >> &g=
t; no disk and this doesn't quite work for me. <br>> >
&=
nbsp; > >> >>
>> >> <br=
> > >
>> >> &g=
t;>
>> What's are the kernel parameters I need
<br>> > > >
to use to <br>> >=
> >> >
boot the <br>> >=
> >>
>> > node in=
to <br>> > >
>> >>&nb=
sp; >> > RAM automatically? I am OK as the first
step<=
br>> > with <br>>
> &nb=
sp; > > a <br>> >
> >&g=
t; > stateless node. <br>> >
>=
>> >> >> >
<br>> > &nbs=
p; > >> >>
>> > Hey=
David,<br>> > >
>> >>=
; >> > <br>> >
> &=
gt;> >> >> > the
stateless mode
is currently not<br>> >
completely <br>&g=
t; > > > working with
<br>> >&nbs=
p; > >> >
oVirt<br>> > &=
nbsp; > >> >>
>> > =
Engine. That means a Node needs to be<br>> >
&nbs=
p; approved <br>> >
> > each time it=
<br>> > >
>> > boots in=
to<br>> > >
>> >>&nbs=
p; >> > the stateless mode.<br>>
> =
> >> >>
>> > The stateles=
s mode can be entered by<br>> >
appending =
<br>> > > >
stateless to <br>> &g=
t; > >> >
the <br>>
> > >>
>> > de=
fault<br>> > >
>> >>&=
nbsp; >> > kernel arguments.<br>>
>  =
; > >> >>
>> > <br>> &g=
t; > >>
>> >>&n=
bsp; > Greetings<br>> >
> >>&n=
bsp; >> >> >
fabian<br>> > &n=
bsp; > >> >>
>> > <br>>=
> > >>
>> > <b=
r>> > >
>> > <br>> &g=
t; > > <br>>
> &=
nbsp; <br>> >
<br>> > &=
nbsp; <br>> >
<br>>
<br>> <br><br><br><br></div> </div>
</div> </blockquote></div> </div>=
</body></html>
---482694697-950170067-1387319042=:76127--
2:16 a.m.
--=-Q2S5z2CFuHZyxwTtGVcm
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Dienstag, den 17.12.2013, 14:24 -0800 schrieb David Li:
Hi Fabiand,
=20
=20
I have a iSCSI partition on my stateless node. But the problem is I
can't format the partition. The same partition can be formatted and
mounted on a regular machine without problems.=20
=20
=20
[root@localhost ~]# mkfs.ext3 /dev/sda
mke2fs 1.42.7 (21-Jan-2013)
/dev/sda is entire device, not just one partition!
Proceed anyway? (y,n) y
=20
/dev/sda is apparently in use by the system; will not make a
filesystem here!
=20
=20
=20
=20
The error message doesn't seem to make sense as the iSCSI partition
isn't used by any other machine. =20
=20
=20
Any idea why this isn't working in a stateless node?=20
This doesn't seem to be a stateless problem.
Please run findmnt /dev/sda to see if it's mounted.
Please also consider to ask your questions on users(a)ovirt.org or
node-devel(a)ovirt.org - there are more people there to answer.
node-devel(a)ovirt.org is especially good for Node stuff.
- fabian
=20
=20
David
=20
=20
______________________________________________________________
From: Fabian Deutsch <fabiand(a)redhat.com>
To: David Li <david_li(a)sbcglobal.net>=20
Cc: "users(a)ovirt.org" <users(a)ovirt.org>=20
Sent: Thursday, December 12, 2013 7:40 AM
Subject: Re: [Users] How to pxeboot ovrit node into memory
automatically?
=20
=20
Am Mittwoch, den 11.12.2013, 17:32 -0800 schrieb David Li:
> Hi Fabian,
>=20
> I booted the new node stateless. But how can connect to it
from ovirt
> engine cli? The cli asks for three things: URL, user name
and
> password. I am not sure how to put them on the kernel boot
option
> line.
>=20
> David
>=20
>=20
>=20
=20
Hey David,
=20
please take a look here to find the correct cmdline:
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterp=
rise_Virtualization/3.0/html/Hypervisor_Deployment_Guide/sect-Deployment_Gu=
ide-Installing_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_Hyperviso=
r_Kernel_Parameters_and_Automated_Installation.html
=20
- fabian
=20
>=20
>
_________________________________________________________________=
_____
> From: Fabian Deutsch <fabiand(a)redhat.com>;=20
> To: David Li <david_li(a)sbcglobal.net>;=20
> Cc: users(a)ovirt.org <users(a)ovirt.org>;=20
> Subject: Re: [Users] How to pxeboot ovrit node into memory
> automatically?=20
> Sent: Wed, Dec 11, 2013 8:00:40 AM=20
>=20
>=20
> Am Dienstag, den 10.12.2013, 16:00 -0800 schrieb David Li:
> > Hi Fabian,
> >=20
> >=20
> > Does the stateless ovirt node have the VDSM built-in?=20
>=20
> Hey David,
>=20
> stateless is a feature or a special mode of oVirt Node which
is also
> available on the "oVirt Node for oVirt Engine" image [1].
> But please note that you will have to approve the Node in
Engine after
> each reboot if you use the stateless feature. This bug [2]
might also
> tackle the problem of a stateless Node.
>=20
> - fabian
>=20
> --
> [1]
>
http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.3-=
1.1.vdsm.fc19.iso
> [2]
https://bugzilla.redhat.com/show_bug.cgi?id=3D875088
>=20
> >=20
> > David
> >=20
> > =20
> >
>
______________________________________________________________
> > From: Fabian Deutsch <fabiand(a)redhat.com>
> > To: David Li <david_li(a)sbcglobal.net>=20
> > Cc: "users(a)ovirt.org" <users(a)ovirt.org>=20
> > Sent: Thursday, December 5, 2013 11:47 PM
> > Subject: Re: [Users] How to pxeboot ovrit node into
memory
> > automatically?
> > =20
> > =20
> > Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb
David Li:
> > > Hi Fabian,
> > >=20
> > > I think the bad route is a link local route
169.254.0.0/16.
> > I am not quite sure if it's a real bug but in my
case I have
> > to remove this route.
> > > Also I am using ramdisk based node without a
local disk.
> Can
> > anything be persisted?=20
> > =20
> > Hey David,
> > =20
> > when you refer to stateless mode, then no, nothing
can be
> > persisted.
> > Regarding the bug - Please provide the whole
cmdline you are
> > using to
> > boot the node, to give me a chance to reproduce it.
> > =20
> > - fabian
> > =20
> > > David
> > >=20
> > >=20
> > >=20
> > > ----- Original Message -----
> > > > From: Fabian Deutsch <fabiand(a)redhat.com>
> > > > To: David Li <david_li(a)sbcglobal.net>
> > > > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> > > > Sent: Wednesday, December 4, 2013 11:17 AM
> > > > Subject: Re: [Users] How to pxeboot ovrit node
into
> memory
> > automatically?
> > > >=20
> > > > Am Montag, den 02.12.2013, 13:53 -0800 schrieb
David Li:
> > > >> Hi Fabian,
> > > >>=20
> > > >> Everytime the ovirt node boots up, it adds a
route
> entry
> > that I have to=20
> > > > manually remove. Otherwise it messed up my
routing.=20
> > > >> How do I modify the boot scripts to
automatically
> remove
> > it?
> > > >=20
> > > > Hey David,
> > > >=20
> > > > could you file a bug for that route problem?
> > > >=20
> > > > You can try the following workaround:
> > > >=20
> > > > # Create /etc/rc.d/rc.local with the commands
to run
> > > > $ vi /etc/rc.d/rc.local
> > > > $ chmod a+x /etc/rc.d/rc.local
> > > > $ persist /etc/rc.d/rc.local
> > > >=20
> > > > /etc/rc.d/rc.local should then be run on every
boot.
> > > >=20
> > > > - fabian
> > > >=20
> > > >> ----- Original Message -----
> > > >> > From: Fabian Deutsch
<fabiand(a)redhat.com>
> > > >> > To: David Li <david_li(a)sbcglobal.net>
> > > >> > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> > > >> > Sent: Monday, October 28, 2013 7:45 AM
> > > >> > Subject: Re: [Users] How to pxeboot ovrit
node into
> > memory=20
> > > > automatically?
> > > >> >=20
> > > >> > Am Montag, den 28.10.2013, 07:42 -0700
schrieb David
> > Li:
> > > >> >>=20
> > > >> >> Hi Fabian,
> > > >> >>=20
> > > >> >> Yes rootpwd worked too! Thanks.
> > > >> >>=20
> > > >> >> Two new problems:
> > > >> >>=20
> > > >> >> But I found there is no networking for
the
> stateless
> > node.
> > > >> >> What kernel boot options are used to
either use
> DHCP
> > or=20
> > > > statically=20
> > > >> > configure the IP address for an interface
on the
> node?
> > > >> >>=20
> > > >> >> I also need to have the sshd enabled.
Is
there a
> > kernel option=20
> > > > for that?
> > > >> >=20
> > > >> > Hey David,
> > > >> >=20
> > > >> > here you can find all the supported boot
params in
> > ovirt node:
> > > >> >=20
> > > >
> >
>
http://gerrit.ovirt.org/gitweb?p=3Dovirt-node.git;a=3Dblob;f=3Dsc=
ripts/ovirt-init-functions.sh.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7f30397=
33;hb=3DHEAD#l214
> > > >> >=20
> > > >> > Greetings
> > > >> > fabian
> > > >> >=20
> > > >> >> David
> > > >> >>=20
> > > >> >>=20
> > > >> >>=20
> > > >> >> ----- Original Message -----
> > > >> >> > From: Fabian Deutsch
<fabiand(a)redhat.com>
> > > >> >> > To: David Li
<david_li(a)sbcglobal.net>
> > > >> >> > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> > > >> >> > Sent: Friday, October 25, 2013
9:10 AM
> > > >> >> > Subject: Re: [Users] How to
pxeboot
ovrit node
> > into memory=20
> > > >> > automatically?
> > > >> >> >=20
> > > >> >> > Am Freitag, den 25.10.2013, 08:57
-0700
schrieb
> > David Li:
> > > >> >> >> Hi Fabian,
> > > >> >> >>=20
> > > >> >> >> That kernel option worked for
me!
The node is
> > booted=20
> > > > up in RAM.=20
> > > >> > Thanks!
> > > >> >> >>=20
> > > >> >> >> My next question is:
> > > >> >> >> How do I specify the root
login and
passwd as
> > boot=20
> > > > parameters?=20
> > > >> >> >=20
> > > >> >> > Hey David.
> > > >> >> >=20
> > > >> >> > Nice that it worked! Were you able
to
register to
> > the=20
> > > > Engine?
> > > >> >> >=20
> > > >> >> > You can use the adminpw=3D and
rootpw=3D
kernel
> > arguments to set=20
> > > >=20
> > > >> > passwords.
> > > >> >> > use
> > > >> >> > $ openssl passwd -salt 42
> > > >> >> > to create one or two passwords
> > > >> >> >=20
> > > >> >> > Greetings
> > > >> >> > fabian
> > > >> >> >=20
> > > >> >> >> David
> > > >> >> >>=20
> > > >> >> >>=20
> > > >> >> >>=20
> > > >> >> >>=20
> > > >> >> >> ----- Original Message -----
> > > >> >> >> > From: Fabian Deutsch
<fabiand(a)redhat.com>
> > > >> >> >> > To: David Li
<david_li(a)sbcglobal.net>
> > > >> >> >> > Cc:
"users(a)ovirt.org"=20
> > > > <users(a)ovirt.org>
> > > >> >> >> > Sent: Thursday, October
24, 2013
11:47 PM
> > > >> >> >> > Subject: Re: [Users] How
to pxeboot
ovrit
> > node=20
> > > > into memory=20
> > > >> >> > automatically?
> > > >> >> >> >=20
> > > >> >> >> > Am Donnerstag, den
24.10.2013,
16:26 -0700
> > schrieb=20
> > > > David Li:
> > > >> >> >> >> Hi,
> > > >> >> >> >>=20
> > > >> >> >> >> I was following the
instructions
at=20
> > > >> >> > http://www.ovirt.org/Node_PXE. My
goal=20
> > > >> >> >> > is to use pxeboot (iPXE)
to boot
the node
> > entirely=20
> > > > into RAM=20
> > > >> > with=20
> > > >> >> > rootfs. What I=20
> > > >> >> >> > got now is an
installation screen
which
> > requires a=20
> > > > local=20
> > > >> > storage. My=20
> > > >> >> > system has=20
> > > >> >> >> > no disk and this
doesn't quite work
for me.=20
> > > >> >> >> >>=20
> > > >> >> >> >> What's are the
kernel parameters
I need=20
> > > > to use to=20
> > > >> > boot the=20
> > > >> >> > node into=20
> > > >> >> >> > RAM automatically? I am
OK as the
first step
> > with=20
> > > > a=20
> > > >> > stateless node.=20
> > > >> >> >> >=20
> > > >> >> >> > Hey David,
> > > >> >> >> >=20
> > > >> >> >> > the stateless mode is
currently not
> > completely=20
> > > > working with=20
> > > >> > oVirt
> > > >> >> >> > Engine. That means a
Node needs to
be
> > approved=20
> > > > each time it=20
> > > >> > boots into
> > > >> >> >> > the stateless mode.
> > > >> >> >> > The stateless mode can
be entered
by
> > appending=20
> > > > stateless to=20
> > > >> > the=20
> > > >> >> > default
> > > >> >> >> > kernel arguments.
> > > >> >> >> >=20
> > > >> >> >> > Greetings
> > > >> >> >> > fabian
> > > >> >> >> >=20
> > > >> >> >=20
> > > >> >=20
> > > >=20
> > =20
> > =20
> > =20
> > =20
>=20
>=20
=20
=20
=20
=20
--=-Q2S5z2CFuHZyxwTtGVcm
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=VHQa
-----END PGP SIGNATURE-----
--=-Q2S5z2CFuHZyxwTtGVcm--
3:41 a.m.
--=-Adq/eqOl0YdqV88IrIl+
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Mittwoch, den 18.12.2013, 09:16 +0100 schrieb Fabian Deutsch:
Am Dienstag, den 17.12.2013, 14:24 -0800 schrieb David Li:
> Hi Fabiand,
>=20
>=20
> I have a iSCSI partition on my stateless node. But the problem is I
> can't format the partition. The same partition can be formatted and
> mounted on a regular machine without problems.=20
>=20
>=20
> [root@localhost ~]# mkfs.ext3 /dev/sda
> mke2fs 1.42.7 (21-Jan-2013)
> /dev/sda is entire device, not just one partition!
> Proceed anyway? (y,n) y
>=20
> /dev/sda is apparently in use by the system; will not make a
> filesystem here!
>=20
>=20
>=20
>=20
> The error message doesn't seem to make sense as the iSCSI partition
> isn't used by any other machine. =20
>=20
>=20
> Any idea why this isn't working in a stateless node?=20
=20
This doesn't seem to be a stateless problem.
=20
Please run findmnt /dev/sda to see if it's mounted.
=20
Please also consider to ask your questions on users(a)ovirt.org or
node-devel(a)ovirt.org - there are more people there to answer.
=20
node-devel(a)ovirt.org is especially good for Node stuff.
My fault - A look at the recipients would have revealed that they are
included :)
- fabian
- fabian
=20
>=20
>=20
> David
>=20
> =20
> ______________________________________________________________
> From: Fabian Deutsch <fabiand(a)redhat.com>
> To: David Li <david_li(a)sbcglobal.net>=20
> Cc: "users(a)ovirt.org" <users(a)ovirt.org>=20
> Sent: Thursday, December 12, 2013 7:40 AM
> Subject: Re: [Users] How to pxeboot ovrit node into memory
> automatically?
> =20
> =20
> Am Mittwoch, den 11.12.2013, 17:32 -0800 schrieb David Li:
> > Hi Fabian,
> >=20
> > I booted the new node stateless. But how can connect to it
> from ovirt
> > engine cli? The cli asks for three things: URL, user name
> and
> > password. I am not sure how to put them on the kernel boot
> option
> > line.
> >=20
> > David
> >=20
> >=20
> >=20
> =20
> Hey David,
> =20
> please take a look here to find the correct cmdline:
> https://access.redhat.com/site/documentation/en-US/Red_Hat_Ente=
rprise_Virtualization/3.0/html/Hypervisor_Deployment_Guide/sect-Deployment_=
Guide-Installing_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_Hypervi=
sor_Kernel_Parameters_and_Automated_Installation.html
> =20
> - fabian
> =20
> >=20
> >
> _______________________________________________________________=
_______
> > From: Fabian Deutsch
<fabiand(a)redhat.com>;=20
> > To: David Li <david_li(a)sbcglobal.net>;=20
> > Cc: users(a)ovirt.org <users(a)ovirt.org>;=20
> > Subject: Re: [Users] How to pxeboot ovrit node into memory
> > automatically?=20
> > Sent: Wed, Dec 11, 2013 8:00:40 AM=20
> >=20
> >=20
> > Am Dienstag, den 10.12.2013, 16:00 -0800 schrieb David Li:
> > > Hi Fabian,
> > >=20
> > >=20
> > > Does the stateless ovirt node have the VDSM built-in?=20
> >=20
> > Hey David,
> >=20
> > stateless is a feature or a special mode of oVirt Node which
> is also
> > available on the "oVirt Node for oVirt Engine" image [1].
> > But please note that you will have to approve the Node in
> Engine after
> > each reboot if you use the stateless feature. This bug [2]
> might also
> > tackle the problem of a stateless Node.
> >=20
> > - fabian
> >=20
> > --
> > [1]
> >
> http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.=
3-1.1.vdsm.fc19.iso
> > [2]
https://bugzilla.redhat.com/show_bug.cgi?id=3D875088
> >=20
> > >=20
> > > David
> > >=20
> > > =20
> > >
> >
> ______________________________________________________________
> > > From: Fabian Deutsch <fabiand(a)redhat.com>
> > > To: David Li <david_li(a)sbcglobal.net>=20
> > > Cc: "users(a)ovirt.org" <users(a)ovirt.org>=20
> > > Sent: Thursday, December 5, 2013 11:47 PM
> > > Subject: Re: [Users] How to pxeboot ovrit node into
> memory
> > > automatically?
> > > =20
> > > =20
> > > Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb
> David Li:
> > > > Hi Fabian,
> > > >=20
> > > > I think the bad route is a link local route
> 169.254.0.0/16.
> > > I am not quite sure if it's a real bug but in my
> case I have
> > > to remove this route.
> > > > Also I am using ramdisk based node without a
> local disk.
> > Can
> > > anything be persisted?=20
> > > =20
> > > Hey David,
> > > =20
> > > when you refer to stateless mode, then no, nothing
> can be
> > > persisted.
> > > Regarding the bug - Please provide the whole
> cmdline you are
> > > using to
> > > boot the node, to give me a chance to reproduce it.
> > > =20
> > > - fabian
> > > =20
> > > > David
> > > >=20
> > > >=20
> > > >=20
> > > > ----- Original Message -----
> > > > > From: Fabian Deutsch <fabiand(a)redhat.com>
> > > > > To: David Li <david_li(a)sbcglobal.net>
> > > > > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> > > > > Sent: Wednesday, December 4, 2013 11:17 AM
> > > > > Subject: Re: [Users] How to pxeboot ovrit node
> into
> > memory
> > > automatically?
> > > > >=20
> > > > > Am Montag, den 02.12.2013, 13:53 -0800 schrieb
> David Li:
> > > > >> Hi Fabian,
> > > > >>=20
> > > > >> Everytime the ovirt node boots up, it adds
a
> route
> > entry
> > > that I have to=20
> > > > > manually remove. Otherwise it messed up my
> routing.=20
> > > > >> How do I modify the boot scripts to
> automatically
> > remove
> > > it?
> > > > >=20
> > > > > Hey David,
> > > > >=20
> > > > > could you file a bug for that route problem?
> > > > >=20
> > > > > You can try the following workaround:
> > > > >=20
> > > > > # Create /etc/rc.d/rc.local with the commands
> to run
> > > > > $ vi /etc/rc.d/rc.local
> > > > > $ chmod a+x /etc/rc.d/rc.local
> > > > > $ persist /etc/rc.d/rc.local
> > > > >=20
> > > > > /etc/rc.d/rc.local should then be run on every
> boot.
> > > > >=20
> > > > > - fabian
> > > > >=20
> > > > >> ----- Original Message -----
> > > > >> > From: Fabian Deutsch
<fabiand(a)redhat.com>
> > > > >> > To: David Li
<david_li(a)sbcglobal.net>
> > > > >> > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> > > > >> > Sent: Monday, October 28, 2013 7:45 AM
> > > > >> > Subject: Re: [Users] How to pxeboot
ovrit
> node into
> > > memory=20
> > > > > automatically?
> > > > >> >=20
> > > > >> > Am Montag, den 28.10.2013, 07:42 -0700
> schrieb David
> > > Li:
> > > > >> >>=20
> > > > >> >> Hi Fabian,
> > > > >> >>=20
> > > > >> >> Yes rootpwd worked too! Thanks.
> > > > >> >>=20
> > > > >> >> Two new problems:
> > > > >> >>=20
> > > > >> >> But I found there is no networking
for
> the
> > stateless
> > > node.
> > > > >> >> What kernel boot options are used
to
> either use
> > DHCP
> > > or=20
> > > > > statically=20
> > > > >> > configure the IP address for an
interface
> on the
> > node?
> > > > >> >>=20
> > > > >> >> I also need to have the sshd
enabled. Is
> there a
> > > kernel option=20
> > > > > for that?
> > > > >> >=20
> > > > >> > Hey David,
> > > > >> >=20
> > > > >> > here you can find all the supported
boot
> params in
> > > ovirt node:
> > > > >> >=20
> > > > >
> > >
> >
> http://gerrit.ovirt.org/gitweb?p=3Dovirt-node.git;a=3Dblob;f=3D=
scripts/ovirt-init-functions.sh.in;h=3Dc4280caefb89c77afc1e8bec8c925aa7f303=
9733;hb=3DHEAD#l214
> > > > >> >=20
> > > > >> > Greetings
> > > > >> > fabian
> > > > >> >=20
> > > > >> >> David
> > > > >> >>=20
> > > > >> >>=20
> > > > >> >>=20
> > > > >> >> ----- Original Message -----
> > > > >> >> > From: Fabian Deutsch
> <fabiand(a)redhat.com>
> > > > >> >> > To: David Li
<david_li(a)sbcglobal.net>
> > > > >> >> > Cc:
"users(a)ovirt.org" <users(a)ovirt.org>
> > > > >> >> > Sent: Friday, October 25,
2013 9:10 AM
> > > > >> >> > Subject: Re: [Users] How to
pxeboot
> ovrit node
> > > into memory=20
> > > > >> > automatically?
> > > > >> >> >=20
> > > > >> >> > Am Freitag, den 25.10.2013,
08:57 -0700
> schrieb
> > > David Li:
> > > > >> >> >> Hi Fabian,
> > > > >> >> >>=20
> > > > >> >> >> That kernel option
worked for me!
> The node is
> > > booted=20
> > > > > up in RAM.=20
> > > > >> > Thanks!
> > > > >> >> >>=20
> > > > >> >> >> My next question is:
> > > > >> >> >> How do I specify the root
login and
> passwd as
> > > boot=20
> > > > > parameters?=20
> > > > >> >> >=20
> > > > >> >> > Hey David.
> > > > >> >> >=20
> > > > >> >> > Nice that it worked! Were you
able to
> register to
> > > the=20
> > > > > Engine?
> > > > >> >> >=20
> > > > >> >> > You can use the adminpw=3D
and rootpw=3D
> kernel
> > > arguments to set=20
> > > > >=20
> > > > >> > passwords.
> > > > >> >> > use
> > > > >> >> > $ openssl passwd -salt 42
> > > > >> >> > to create one or two
passwords
> > > > >> >> >=20
> > > > >> >> > Greetings
> > > > >> >> > fabian
> > > > >> >> >=20
> > > > >> >> >> David
> > > > >> >> >>=20
> > > > >> >> >>=20
> > > > >> >> >>=20
> > > > >> >> >>=20
> > > > >> >> >> ----- Original Message
-----
> > > > >> >> >> > From: Fabian
Deutsch
> <fabiand(a)redhat.com>
> > > > >> >> >> > To: David Li
> <david_li(a)sbcglobal.net>
> > > > >> >> >> > Cc:
"users(a)ovirt.org"=20
> > > > > <users(a)ovirt.org>
> > > > >> >> >> > Sent: Thursday,
October 24, 2013
> 11:47 PM
> > > > >> >> >> > Subject: Re:
[Users] How to pxeboot
> ovrit
> > > node=20
> > > > > into memory=20
> > > > >> >> > automatically?
> > > > >> >> >> >=20
> > > > >> >> >> > Am Donnerstag, den
24.10.2013,
> 16:26 -0700
> > > schrieb=20
> > > > > David Li:
> > > > >> >> >> >> Hi,
> > > > >> >> >> >>=20
> > > > >> >> >> >> I was
following the instructions
> at=20
> > > > >> >> >
http://www.ovirt.org/Node_PXE. My goal=
=20
> > > > >> >> >> >
is to use pxeboot (iPXE) to boot
> the node
> > > entirely=20
> > > > > into RAM=20
> > > > >> > with=20
> > > > >> >> > rootfs. What I=20
> > > > >> >> >> > got now is an
installation screen
> which
> > > requires a=20
> > > > > local=20
> > > > >> > storage. My=20
> > > > >> >> > system has=20
> > > > >> >> >> > no disk and this
doesn't quite work
> for me.=20
> > > > >> >> >> >>=20
> > > > >> >> >> >> What's are
the kernel parameters
> I need=20
> > > > > to use to=20
> > > > >> > boot the=20
> > > > >> >> > node into=20
> > > > >> >> >> > RAM automatically?
I am OK as the
> first step
> > > with=20
> > > > > a=20
> > > > >> > stateless node.=20
> > > > >> >> >> >=20
> > > > >> >> >> > Hey David,
> > > > >> >> >> >=20
> > > > >> >> >> > the stateless mode
is currently not
> > > completely=20
> > > > > working with=20
> > > > >> > oVirt
> > > > >> >> >> > Engine. That means
a Node needs to
> be
> > > approved=20
> > > > > each time it=20
> > > > >> > boots into
> > > > >> >> >> > the stateless
mode.
> > > > >> >> >> > The stateless mode
can be entered
> by
> > > appending=20
> > > > > stateless to=20
> > > > >> > the=20
> > > > >> >> > default
> > > > >> >> >> > kernel arguments.
> > > > >> >> >> >=20
> > > > >> >> >> > Greetings
> > > > >> >> >> > fabian
> > > > >> >> >> >=20
> > > > >> >> >=20
> > > > >> >=20
> > > > >=20
> > > =20
> > > =20
> > > =20
> > > =20
> >=20
> >=20
> =20
> =20
> =20
> =20
=20
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--=-Adq/eqOl0YdqV88IrIl+
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=4cWj
-----END PGP SIGNATURE-----
--=-Adq/eqOl0YdqV88IrIl+--
8:58 a.m.
The device might be grabbed/locked by vdsm/sanlock.
On Wed, Dec 18, 2013 at 9:16 AM, Fabian Deutsch <fabiand(a)redhat.com> wrote:
Am Dienstag, den 17.12.2013, 14:24 -0800 schrieb David Li:
> Hi Fabiand,
>
>
> I have a iSCSI partition on my stateless node. But the problem is I
> can't format the partition. The same partition can be formatted and
> mounted on a regular machine without problems.
>
>
> [root@localhost ~]# mkfs.ext3 /dev/sda
> mke2fs 1.42.7 (21-Jan-2013)
> /dev/sda is entire device, not just one partition!
> Proceed anyway? (y,n) y
>
> /dev/sda is apparently in use by the system; will not make a
> filesystem here!
>
>
>
>
> The error message doesn't seem to make sense as the iSCSI partition
> isn't used by any other machine.
>
>
> Any idea why this isn't working in a stateless node?
This doesn't seem to be a stateless problem.
Please run findmnt /dev/sda to see if it's mounted.
Please also consider to ask your questions on users(a)ovirt.org or
node-devel(a)ovirt.org - there are more people there to answer.
node-devel(a)ovirt.org is especially good for Node stuff.
- fabian
>
>
> David
>
>
> ______________________________________________________________
> From: Fabian Deutsch <fabiand(a)redhat.com>
> To: David Li <david_li(a)sbcglobal.net>
> Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> Sent: Thursday, December 12, 2013 7:40 AM
> Subject: Re: [Users] How to pxeboot ovrit node into memory
> automatically?
>
>
> Am Mittwoch, den 11.12.2013, 17:32 -0800 schrieb David Li:
> > Hi Fabian,
> >
> > I booted the new node stateless. But how can connect to it
> from ovirt
> > engine cli? The cli asks for three things: URL, user name
> and
> > password. I am not sure how to put them on the kernel boot
> option
> > line.
> >
> > David
> >
> >
> >
>
> Hey David,
>
> please take a look here to find the correct cmdline:
>
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Vir...
>
> - fabian
>
> >
> >
> ______________________________________________________________________
> > From: Fabian Deutsch <fabiand(a)redhat.com>;
> > To: David Li <david_li(a)sbcglobal.net>;
> > Cc: users(a)ovirt.org <users(a)ovirt.org>;
> > Subject: Re: [Users] How to pxeboot ovrit node into memory
> > automatically?
> > Sent: Wed, Dec 11, 2013 8:00:40 AM
> >
> >
> > Am Dienstag, den 10.12.2013, 16:00 -0800 schrieb David Li:
> > > Hi Fabian,
> > >
> > >
> > > Does the stateless ovirt node have the VDSM built-in?
> >
> > Hey David,
> >
> > stateless is a feature or a special mode of oVirt Node which
> is also
> > available on the "oVirt Node for oVirt Engine" image [1].
> > But please note that you will have to approve the Node in
> Engine after
> > each reboot if you use the stateless feature. This bug [2]
> might also
> > tackle the problem of a stateless Node.
> >
> > - fabian
> >
> > --
> > [1]
> >
>
http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.3-1.1.vdsm...
> > [2] https://bugzilla.redhat.com/show_bug.cgi?id=875088
> >
> > >
> > > David
> > >
> > >
> > >
> >
> ______________________________________________________________
> > > From: Fabian Deutsch <fabiand(a)redhat.com>
> > > To: David Li <david_li(a)sbcglobal.net>
> > > Cc: "users(a)ovirt.org" <users(a)ovirt.org>
> > > Sent: Thursday, December 5, 2013 11:47 PM
> > > Subject: Re: [Users] How to pxeboot ovrit node into
> memory
> > > automatically?
> > >
> > >
> > > Am Donnerstag, den 05.12.2013, 16:30 -0800 schrieb
> David Li:
> > > > Hi Fabian,
> > > >
> > > > I think the bad route is a link local route
> 169.254.0.0/16.
> > > I am not quite sure if it's a real bug but in my
> case I have
> > > to remove this route.
> > > > Also I am using ramdisk based node without a
> local disk.
> > Can
> > > anything be persisted?
> > >
> > > Hey David,
> > >
> > > when you refer to stateless mode, then no, nothing
> can be
> > > persisted.
> > > Regarding the bug - Please provide the whole
> cmdline you are
> > > using to
> > > boot the node, to give me a chance to reproduce it.
> > >
> > > - fabian
> > >
> > > > David
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: Fabian Deutsch <fabiand(a)redhat.com>
> > > > > To: David Li <david_li(a)sbcglobal.net>
> > > > > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> > > > > Sent: Wednesday, December 4, 2013 11:17 AM
> > > > > Subject: Re: [Users] How to pxeboot ovrit node
> into
> > memory
> > > automatically?
> > > > >
> > > > > Am Montag, den 02.12.2013, 13:53 -0800 schrieb
> David Li:
> > > > >> Hi Fabian,
> > > > >>
> > > > >> Everytime the ovirt node boots up, it adds a
> route
> > entry
> > > that I have to
> > > > > manually remove. Otherwise it messed up my
> routing.
> > > > >> How do I modify the boot scripts to
> automatically
> > remove
> > > it?
> > > > >
> > > > > Hey David,
> > > > >
> > > > > could you file a bug for that route problem?
> > > > >
> > > > > You can try the following workaround:
> > > > >
> > > > > # Create /etc/rc.d/rc.local with the commands
> to run
> > > > > $ vi /etc/rc.d/rc.local
> > > > > $ chmod a+x /etc/rc.d/rc.local
> > > > > $ persist /etc/rc.d/rc.local
> > > > >
> > > > > /etc/rc.d/rc.local should then be run on every
> boot.
> > > > >
> > > > > - fabian
> > > > >
> > > > >> ----- Original Message -----
> > > > >> > From: Fabian Deutsch
<fabiand(a)redhat.com>
> > > > >> > To: David Li
<david_li(a)sbcglobal.net>
> > > > >> > Cc: "users(a)ovirt.org"
<users(a)ovirt.org>
> > > > >> > Sent: Monday, October 28, 2013 7:45 AM
> > > > >> > Subject: Re: [Users] How to pxeboot
ovrit
> node into
> > > memory
> > > > > automatically?
> > > > >> >
> > > > >> > Am Montag, den 28.10.2013, 07:42 -0700
> schrieb David
> > > Li:
> > > > >> >>
> > > > >> >> Hi Fabian,
> > > > >> >>
> > > > >> >> Yes rootpwd worked too! Thanks.
> > > > >> >>
> > > > >> >> Two new problems:
> > > > >> >>
> > > > >> >> But I found there is no networking
for
> the
> > stateless
> > > node.
> > > > >> >> What kernel boot options are used
to
> either use
> > DHCP
> > > or
> > > > > statically
> > > > >> > configure the IP address for an
interface
> on the
> > node?
> > > > >> >>
> > > > >> >> I also need to have the sshd
enabled. Is
> there a
> > > kernel option
> > > > > for that?
> > > > >> >
> > > > >> > Hey David,
> > > > >> >
> > > > >> > here you can find all the supported
boot
> params in
> > > ovirt node:
> > > > >> >
> > > > >
> > >
> >
>
http://gerrit.ovirt.org/gitweb?p=ovirt-node.git;a=blob;f=scripts/ovirt-in...
> > > > >> >
> > > > >> > Greetings
> > > > >> > fabian
> > > > >> >
> > > > >> >> David
> > > > >> >>
> > > > >> >>
> > > > >> >>
> > > > >> >> ----- Original Message -----
> > > > >> >> > From: Fabian Deutsch
> <fabiand(a)redhat.com>
> > > > >> >> > To: David Li
<david_li(a)sbcglobal.net>
> > > > >> >> > Cc:
"users(a)ovirt.org" <users(a)ovirt.org>
> > > > >> >> > Sent: Friday, October 25, 2013
9:10 AM
> > > > >> >> > Subject: Re: [Users] How to
pxeboot
> ovrit node
> > > into memory
> > > > >> > automatically?
> > > > >> >> >
> > > > >> >> > Am Freitag, den 25.10.2013,
08:57 -0700
> schrieb
> > > David Li:
> > > > >> >> >> Hi Fabian,
> > > > >> >> >>
> > > > >> >> >> That kernel option worked
for me!
> The node is
> > > booted
> > > > > up in RAM.
> > > > >> > Thanks!
> > > > >> >> >>
> > > > >> >> >> My next question is:
> > > > >> >> >> How do I specify the root
login and
> passwd as
> > > boot
> > > > > parameters?
> > > > >> >> >
> > > > >> >> > Hey David.
> > > > >> >> >
> > > > >> >> > Nice that it worked! Were you
able to
> register to
> > > the
> > > > > Engine?
> > > > >> >> >
> > > > >> >> > You can use the adminpw= and
rootpw=
> kernel
> > > arguments to set
> > > > >
> > > > >> > passwords.
> > > > >> >> > use
> > > > >> >> > $ openssl passwd -salt 42
> > > > >> >> > to create one or two
passwords
> > > > >> >> >
> > > > >> >> > Greetings
> > > > >> >> > fabian
> > > > >> >> >
> > > > >> >> >> David
> > > > >> >> >>
> > > > >> >> >>
> > > > >> >> >>
> > > > >> >> >>
> > > > >> >> >> ----- Original Message
-----
> > > > >> >> >> > From: Fabian
Deutsch
> <fabiand(a)redhat.com>
> > > > >> >> >> > To: David Li
> <david_li(a)sbcglobal.net>
> > > > >> >> >> > Cc:
"users(a)ovirt.org"
> > > > > <users(a)ovirt.org>
> > > > >> >> >> > Sent: Thursday,
October 24, 2013
> 11:47 PM
> > > > >> >> >> > Subject: Re: [Users]
How to pxeboot
> ovrit
> > > node
> > > > > into memory
> > > > >> >> > automatically?
> > > > >> >> >> >
> > > > >> >> >> > Am Donnerstag, den
24.10.2013,
> 16:26 -0700
> > > schrieb
> > > > > David Li:
> > > > >> >> >> >> Hi,
> > > > >> >> >> >>
> > > > >> >> >> >> I was following
the instructions
> at
> > > > >> >> > http://www.ovirt.org/Node_PXE.
My goal
> > > > >> >> >> > is to use pxeboot
(iPXE) to boot
> the node
> > > entirely
> > > > > into RAM
> > > > >> > with
> > > > >> >> > rootfs. What I
> > > > >> >> >> > got now is an
installation screen
> which
> > > requires a
> > > > > local
> > > > >> > storage. My
> > > > >> >> > system has
> > > > >> >> >> > no disk and this
doesn't quite work
> for me.
> > > > >> >> >> >>
> > > > >> >> >> >> What's are
the kernel parameters
> I need
> > > > > to use to
> > > > >> > boot the
> > > > >> >> > node into
> > > > >> >> >> > RAM automatically?
I am OK as the
> first step
> > > with
> > > > > a
> > > > >> > stateless node.
> > > > >> >> >> >
> > > > >> >> >> > Hey David,
> > > > >> >> >> >
> > > > >> >> >> > the stateless mode
is currently not
> > > completely
> > > > > working with
> > > > >> > oVirt
> > > > >> >> >> > Engine. That means a
Node needs to
> be
> > > approved
> > > > > each time it
> > > > >> > boots into
> > > > >> >> >> > the stateless mode.
> > > > >> >> >> > The stateless mode
can be entered
> by
> > > appending
> > > > > stateless to
> > > > >> > the
> > > > >> >> > default
> > > > >> >> >> > kernel arguments.
> > > > >> >> >> >
> > > > >> >> >> > Greetings
> > > > >> >> >> > fabian
> > > > >> >> >> >
> > > > >> >> >
> > > > >> >
> > > > >
> > >
> > >
> > >
> > >
> >
> >
>
>
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3789
days inactive
3844
days old
18 comments
3 participants
participants (3)
-
David Li -
Fabian Deutsch -
Sander Grendelman