5:05 p.m.
Hello Everyone,
Using 4.3.2 installation, and after running through HyperConverged Setup,
at the last stage it fails. It seems that the previously created "engine"
volume is not mounted under "/rhev" path, therefore the setup cannot finish
the deployment.
Any ideea which are the services responsible of mounting the volumes on
oVirt Node distribution ? I'm thinking that maybe this particularly one
failed to start for some reason...
Thank you very much !
--
Best regards, Leo David
9:15 a.m.
Hi,
to understand what's failing I'd suggest to start attaching setup logs.
On Sun, Mar 31, 2019 at 5:06 PM Leo David <leoalex(a)gmail.com> wrote:
Hello Everyone,
Using 4.3.2 installation, and after running through HyperConverged Setup,
at the last stage it fails. It seems that the previously created "engine"
volume is not mounted under "/rhev" path, therefore the setup cannot finish
the deployment.
Any ideea which are the services responsible of mounting the volumes on
oVirt Node distribution ? I'm thinking that maybe this particularly one
failed to start for some reason...
Thank you very much !
--
Best regards, Leo David
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
6:14 p.m.
Thank you Simone.
I've decides to go for a new fresh install from iso, and i'll keep posted
if any troubles arise. But I am still trying to understand what are the
services that mount the lvms and volumes after configuration. There is
nothing related in fstab, so I assume there are a couple of .mount files
somewhere in the filesystem.
Im just trying to understand node's underneath workflow.
On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi <stirabos(a)redhat.com> wrote:
Hi,
to understand what's failing I'd suggest to start attaching setup logs.
On Sun, Mar 31, 2019 at 5:06 PM Leo David <leoalex(a)gmail.com> wrote:
> Hello Everyone,
> Using 4.3.2 installation, and after running through HyperConverged
> Setup, at the last stage it fails. It seems that the previously created
> "engine" volume is not mounted under "/rhev" path, therefore the
setup
> cannot finish the deployment.
> Any ideea which are the services responsible of mounting the volumes on
> oVirt Node distribution ? I'm thinking that maybe this particularly one
> failed to start for some reason...
> Thank you very much !
>
> --
> Best regards, Leo David
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>
8:46 p.m.
On Mon, Apr 1, 2019 at 6:14 PM Leo David <leoalex(a)gmail.com> wrote:
Thank you Simone.
I've decides to go for a new fresh install from iso, and i'll keep posted
if any troubles arise. But I am still trying to understand what are the
services that mount the lvms and volumes after configuration. There is
nothing related in fstab, so I assume there are a couple of .mount files
somewhere in the filesystem.
Im just trying to understand node's underneath workflow.
hosted-engine configuration is stored
in /etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount
the hosted-engine storage domain according to that and so ovirt-ha-agent
will be able to start the engine VM.
Everything else is just in the engine DB.
On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi <stirabos(a)redhat.com> wrote:
> Hi,
> to understand what's failing I'd suggest to start attaching setup logs.
>
> On Sun, Mar 31, 2019 at 5:06 PM Leo David <leoalex(a)gmail.com> wrote:
>
>> Hello Everyone,
>> Using 4.3.2 installation, and after running through HyperConverged
>> Setup, at the last stage it fails. It seems that the previously created
>> "engine" volume is not mounted under "/rhev" path, therefore
the setup
>> cannot finish the deployment.
>> Any ideea which are the services responsible of mounting the volumes on
>> oVirt Node distribution ? I'm thinking that maybe this particularly one
>> failed to start for some reason...
>> Thank you very much !
>>
>> --
>> Best regards, Leo David
>> _______________________________________________
>> Users mailing list -- users(a)ovirt.org
>> To unsubscribe send an email to users-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>>
>
10:34 a.m.
Thank you very much !
I have just installed a new fresh node, and triggered the single instance
hyperconverged setup. It seems it fails at the hosted engine final steps of
deployment:
INFO ] TASK [ovirt.hosted_engine_setup : Get required size]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable storage domain]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain free space]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
"[Cannot attach Storage. There is no active Host in the Data Center.]".
HTTP response code is 409.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"Fault
reason is \"Operation Failed\". Fault detail is \"[Cannot attach Storage.
There is no active Host in the Data Center.]\". HTTP response code is 409."}
Also, the
ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log
throws
the following:
2019-04-02 09:25:40,420+0100 DEBUG var changed: host "localhost" var
"otopi_storage_domain_details" type "<type 'dict'>"
value: "{
"changed": false,
"exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 664,
in main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 526,
in post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n
File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232,
in _internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
wait\n return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[Cannot attach Storage. There is no active Host in the
Data Center.]\". HTTP response code is 409.\n",
"failed": true,
"msg": "Fault reason is \"Operation Failed\". Fault detail is
\"[Cannot
attach Storage. There is no active Host in the Data Center.]\". HTTP
response code is 409."
}"
I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso. So far,
I am unable to deploy oVirt single node Hyperconverged...
Any thoughts ?
On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi <stirabos(a)redhat.com>
wrote:
On Mon, Apr 1, 2019 at 6:14 PM Leo David <leoalex(a)gmail.com> wrote:
> Thank you Simone.
> I've decides to go for a new fresh install from iso, and i'll keep posted
> if any troubles arise. But I am still trying to understand what are the
> services that mount the lvms and volumes after configuration. There is
> nothing related in fstab, so I assume there are a couple of .mount files
> somewhere in the filesystem.
> Im just trying to understand node's underneath workflow.
>
hosted-engine configuration is stored
in /etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount
the hosted-engine storage domain according to that and so ovirt-ha-agent
will be able to start the engine VM.
Everything else is just in the engine DB.
>
> On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi <stirabos(a)redhat.com> wrote:
>
>> Hi,
>> to understand what's failing I'd suggest to start attaching setup logs.
>>
>> On Sun, Mar 31, 2019 at 5:06 PM Leo David <leoalex(a)gmail.com> wrote:
>>
>>> Hello Everyone,
>>> Using 4.3.2 installation, and after running through HyperConverged
>>> Setup, at the last stage it fails. It seems that the previously created
>>> "engine" volume is not mounted under "/rhev" path,
therefore the setup
>>> cannot finish the deployment.
>>> Any ideea which are the services responsible of mounting the volumes on
>>> oVirt Node distribution ? I'm thinking that maybe this particularly one
>>> failed to start for some reason...
>>> Thank you very much !
>>>
>>> --
>>> Best regards, Leo David
>>> _______________________________________________
>>> Users mailing list -- users(a)ovirt.org
>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct:
>>> https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives:
>>>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>>>
>>
--
Best regards, Leo David
11:11 a.m.
Hi Leo,
Can you please paste "df -Th" and "gluster v status" out put ?
Wanted to make sure engine mounted and volumes and bricks are up.
What does vdsm log say?
On Tue, Apr 2, 2019 at 2:06 PM Leo David <leoalex(a)gmail.com> wrote:
Thank you very much !
I have just installed a new fresh node, and triggered the single
instance hyperconverged setup. It seems it fails at the hosted engine final
steps of deployment:
INFO ] TASK [ovirt.hosted_engine_setup : Get required size]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable storage
domain]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain free space]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
"[Cannot attach Storage. There is no active Host in the Data Center.]".
HTTP response code is 409.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"Fault
reason is \"Operation Failed\". Fault detail is \"[Cannot attach Storage.
There is no active Host in the Data Center.]\". HTTP response code is 409."}
Also, the
ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log throws
the following:
2019-04-02 09:25:40,420+0100 DEBUG var changed: host "localhost" var
"otopi_storage_domain_details" type "<type 'dict'>"
value: "{
"changed": false,
"exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 664,
in main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 526,
in post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n
File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232,
in _internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
wait\n return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[Cannot attach Storage. There is no active Host in the
Data Center.]\". HTTP response code is 409.\n",
"failed": true,
"msg": "Fault reason is \"Operation Failed\". Fault detail
is
\"[Cannot attach Storage. There is no active Host in the Data Center.]\".
HTTP response code is 409."
}"
I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso. So far,
I am unable to deploy oVirt single node Hyperconverged...
Any thoughts ?
On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi <stirabos(a)redhat.com>
wrote:
>
>
> On Mon, Apr 1, 2019 at 6:14 PM Leo David <leoalex(a)gmail.com> wrote:
>
>> Thank you Simone.
>> I've decides to go for a new fresh install from iso, and i'll keep
>> posted if any troubles arise. But I am still trying to understand what are
>> the services that mount the lvms and volumes after configuration. There is
>> nothing related in fstab, so I assume there are a couple of .mount files
>> somewhere in the filesystem.
>> Im just trying to understand node's underneath workflow.
>>
>
> hosted-engine configuration is stored
> in /etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount
> the hosted-engine storage domain according to that and so ovirt-ha-agent
> will be able to start the engine VM.
> Everything else is just in the engine DB.
>
>
>>
>> On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi <stirabos(a)redhat.com>
>> wrote:
>>
>>> Hi,
>>> to understand what's failing I'd suggest to start attaching setup
logs.
>>>
>>> On Sun, Mar 31, 2019 at 5:06 PM Leo David <leoalex(a)gmail.com> wrote:
>>>
>>>> Hello Everyone,
>>>> Using 4.3.2 installation, and after running through HyperConverged
>>>> Setup, at the last stage it fails. It seems that the previously created
>>>> "engine" volume is not mounted under "/rhev" path,
therefore the setup
>>>> cannot finish the deployment.
>>>> Any ideea which are the services responsible of mounting the volumes
>>>> on oVirt Node distribution ? I'm thinking that maybe this
particularly one
>>>> failed to start for some reason...
>>>> Thank you very much !
>>>>
>>>> --
>>>> Best regards, Leo David
>>>> _______________________________________________
>>>> Users mailing list -- users(a)ovirt.org
>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>> oVirt Code of Conduct:
>>>> https://www.ovirt.org/community/about/community-guidelines/
>>>> List Archives:
>>>>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>>>>
>>>
--
Best regards, Leo David
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NROCMKIFJDE...
--
Thanks,
Gobinda
11:41 a.m.
Hi,
I have just hit "Redeploy" and not the volume seems to be mounted:
Filesystem Type
Size Used Avail Use% Mounted on
/dev/mapper/onn-ovirt--node--ng--4.3.2--0.20190319.0+1 ext4
57G 3.0G 51G 6% /
devtmpfs devtmpfs
48G 0 48G 0% /dev
tmpfs tmpfs
48G 4.0K 48G 1% /dev/shm
tmpfs tmpfs
48G 34M 48G 1% /run
tmpfs tmpfs
48G 0 48G 0% /sys/fs/cgroup
/dev/sda1 ext4
976M 183M 726M 21% /boot
/dev/mapper/onn-var ext4
15G 4.4G 9.5G 32% /var
/dev/mapper/onn-tmp ext4
976M 3.2M 906M 1% /tmp
/dev/mapper/onn-var_log ext4
17G 56M 16G 1% /var/log
/dev/mapper/onn-var_log_audit ext4
2.0G 8.7M 1.8G 1% /var/log/audit
/dev/mapper/onn-home ext4
976M 2.6M 907M 1% /home
/dev/mapper/onn-var_crash ext4
9.8G 37M 9.2G 1% /var/crash
tmpfs tmpfs
9.5G 0 9.5G 0% /run/user/0
/dev/mapper/gluster_vg_sdb-gluster_lv_engine xfs
100G 35M 100G 1% /gluster_bricks/engine
c6100-ch3-node1-gluster.internal.lab:/engine fuse.glusterfs
100G 1.1G 99G 2%
/rhev/data-center/mnt/glusterSD/c6100-ch3-node1-gluster.internal.lab:_engine
[root@c6100-ch3-node1 ovirt-hosted-engine-setup]# gluster v status
Status of volume: engine
Gluster process TCP Port RDMA Port Online Pid
------------------------------------------------------------------------------
Brick c6100-ch3-node1-gluster.internal.lab:
/gluster_bricks/engine/engine 49152 0 Y
25397
Task Status of Volume engine
------------------------------------------------------------------------------
There are no active volume tasks
The problem is that the deployment still not finishing, now the error is:
INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
"[]".
HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"Fault
reason is \"Operation Failed\". Fault detail is \"[]\". HTTP response
code
is 400."}
I just do not understand anymore...
On Tue, Apr 2, 2019 at 12:11 PM Gobinda Das <godas(a)redhat.com> wrote:
Hi Leo,
Can you please paste "df -Th" and "gluster v status" out put ?
Wanted to make sure engine mounted and volumes and bricks are up.
What does vdsm log say?
On Tue, Apr 2, 2019 at 2:06 PM Leo David <leoalex(a)gmail.com> wrote:
> Thank you very much !
> I have just installed a new fresh node, and triggered the single
> instance hyperconverged setup. It seems it fails at the hosted engine final
> steps of deployment:
> INFO ] TASK [ovirt.hosted_engine_setup : Get required size]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable storage
> domain]
> [ INFO ] skipping: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain free
> space]
> [ INFO ] skipping: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
> [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
> "[Cannot attach Storage. There is no active Host in the Data Center.]".
> HTTP response code is 409.
> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg": "Fault
> reason is \"Operation Failed\". Fault detail is \"[Cannot attach
Storage.
> There is no active Host in the Data Center.]\". HTTP response code is
409."}
> Also, the
> ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log
throws
> the following:
>
> 2019-04-02 09:25:40,420+0100 DEBUG var changed: host "localhost" var
> "otopi_storage_domain_details" type "<type 'dict'>"
value: "{
> "changed": false,
> "exception": "Traceback (most recent call last):\n File
> \"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line
664,
> in main\n storage_domains_module.post_create_check(sd_id)\n File
> \"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line
526,
> in post_create_check\n id=storage_domain.id,\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053,
in
> add\n return self._internal_add(storage_domain, headers, query, wait)\n
> File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line
232,
> in _internal_add\n return future.wait() if wait else future\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
> wait\n return self._code(response)\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
> callback\n self._check_fault(response)\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
> _check_fault\n self._raise_error(response, body)\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
> _raise_error\n raise error\nError: Fault reason is \"Operation
Failed\".
> Fault detail is \"[Cannot attach Storage. There is no active Host in the
> Data Center.]\". HTTP response code is 409.\n",
> "failed": true,
> "msg": "Fault reason is \"Operation Failed\". Fault
detail is
> \"[Cannot attach Storage. There is no active Host in the Data Center.]\".
> HTTP response code is 409."
> }"
>
> I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso. So
> far, I am unable to deploy oVirt single node Hyperconverged...
> Any thoughts ?
>
>
>
> On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi <stirabos(a)redhat.com>
> wrote:
>
>>
>>
>> On Mon, Apr 1, 2019 at 6:14 PM Leo David <leoalex(a)gmail.com> wrote:
>>
>>> Thank you Simone.
>>> I've decides to go for a new fresh install from iso, and i'll keep
>>> posted if any troubles arise. But I am still trying to understand what are
>>> the services that mount the lvms and volumes after configuration. There is
>>> nothing related in fstab, so I assume there are a couple of .mount files
>>> somewhere in the filesystem.
>>> Im just trying to understand node's underneath workflow.
>>>
>>
>> hosted-engine configuration is stored
>> in /etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount
>> the hosted-engine storage domain according to that and so ovirt-ha-agent
>> will be able to start the engine VM.
>> Everything else is just in the engine DB.
>>
>>
>>>
>>> On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi <stirabos(a)redhat.com>
>>> wrote:
>>>
>>>> Hi,
>>>> to understand what's failing I'd suggest to start attaching
setup
>>>> logs.
>>>>
>>>> On Sun, Mar 31, 2019 at 5:06 PM Leo David <leoalex(a)gmail.com>
wrote:
>>>>
>>>>> Hello Everyone,
>>>>> Using 4.3.2 installation, and after running through HyperConverged
>>>>> Setup, at the last stage it fails. It seems that the previously
created
>>>>> "engine" volume is not mounted under "/rhev"
path, therefore the setup
>>>>> cannot finish the deployment.
>>>>> Any ideea which are the services responsible of mounting the volumes
>>>>> on oVirt Node distribution ? I'm thinking that maybe this
particularly one
>>>>> failed to start for some reason...
>>>>> Thank you very much !
>>>>>
>>>>> --
>>>>> Best regards, Leo David
>>>>> _______________________________________________
>>>>> Users mailing list -- users(a)ovirt.org
>>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>>> oVirt Code of Conduct:
>>>>> https://www.ovirt.org/community/about/community-guidelines/
>>>>> List Archives:
>>>>>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>>>>>
>>>>
>
> --
> Best regards, Leo David
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NROCMKIFJDE...
>
--
Thanks,
Gobinda
--
Best regards, Leo David
12:13 p.m.
And there it is the last lines on the ansible_create_storage_domain log:
2019-04-02 10:53:49,139+0100 DEBUG var changed: host "localhost" var
"otopi_storage_domain_details" type "<type 'dict'>"
value: "{
"changed": false,
"exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 664,
in main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 526,
in post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n
File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232,
in _internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
wait\n return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[]\". HTTP response code is 400.\n",
"failed": true,
"msg": "Fault reason is \"Operation Failed\". Fault detail is
\"[]\".
HTTP response code is 400."
}"
2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost" var
"ansible_play_hosts" type "<type 'list'>" value:
"[]"
2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost" var
"play_hosts" type "<type 'list'>" value: "[]"
2019-04-02 10:53:49,142+0100 DEBUG var changed: host "localhost" var
"ansible_play_batch" type "<type 'list'>" value:
"[]"
2019-04-02 10:53:49,142+0100 ERROR ansible failed {'status': 'FAILED',
'ansible_type': 'task', 'ansible_task': u'Activate storage
domain',
'ansible_result': u'type: <type \'dict\'>\nstr:
{\'_ansible_parsed\': True,
u\'exception\': u\'Traceback (most recent call last):\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 664,
in main\\n storage_domains_module.post_create_check(sd_id)\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 526',
'task_duration': 9, 'ansible_host': u'localhost',
'ansible_playbook':
u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml'}
2019-04-02 10:53:49,143+0100 DEBUG ansible on_any args
<ansible.executor.task_result.TaskResult object at 0x7f03fd025e50> kwargs
ignore_errors:None
2019-04-02 10:53:49,148+0100 INFO ansible stats {
"ansible_playbook":
"/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml",
"ansible_playbook_duration": "01:15 Minutes",
"ansible_result": "type: <type 'dict'>\nstr:
{u'localhost':
{'unreachable': 0, 'skipped': 6, 'ok': 23, 'changed': 0,
'failures': 1}}",
"ansible_type": "finish",
"status": "FAILED"
}
2019-04-02 10:53:49,149+0100 INFO SUMMARY:
Duration Task Name
-------- --------
[ < 1 sec ] Execute just a specific set of steps
[ 00:02 ] Force facts gathering
[ 00:02 ] Check local VM dir stat
[ 00:02 ] Obtain SSO token using username/password credentials
[ 00:02 ] Fetch host facts
[ 00:01 ] Fetch cluster ID
[ 00:02 ] Fetch cluster facts
[ 00:02 ] Fetch Datacenter facts
[ 00:01 ] Fetch Datacenter ID
[ 00:01 ] Fetch Datacenter name
[ 00:02 ] Add glusterfs storage domain
[ 00:02 ] Get storage domain details
[ 00:02 ] Find the appliance OVF
[ 00:02 ] Parse OVF
[ 00:02 ] Get required size
[ FAILED ] Activate storage domain
Any ideea on how to escalate this issue ?
It just does not make sense to not be able to install from scratch a fresh
node...
Have a nice day !
Leo
On Tue, Apr 2, 2019 at 12:11 PM Gobinda Das <godas(a)redhat.com> wrote:
Hi Leo,
Can you please paste "df -Th" and "gluster v status" out put ?
Wanted to make sure engine mounted and volumes and bricks are up.
What does vdsm log say?
On Tue, Apr 2, 2019 at 2:06 PM Leo David <leoalex(a)gmail.com> wrote:
> Thank you very much !
> I have just installed a new fresh node, and triggered the single
> instance hyperconverged setup. It seems it fails at the hosted engine final
> steps of deployment:
> INFO ] TASK [ovirt.hosted_engine_setup : Get required size]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable storage
> domain]
> [ INFO ] skipping: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain free
> space]
> [ INFO ] skipping: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
> [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
> "[Cannot attach Storage. There is no active Host in the Data Center.]".
> HTTP response code is 409.
> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg": "Fault
> reason is \"Operation Failed\". Fault detail is \"[Cannot attach
Storage.
> There is no active Host in the Data Center.]\". HTTP response code is
409."}
> Also, the
> ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log
throws
> the following:
>
> 2019-04-02 09:25:40,420+0100 DEBUG var changed: host "localhost" var
> "otopi_storage_domain_details" type "<type 'dict'>"
value: "{
> "changed": false,
> "exception": "Traceback (most recent call last):\n File
> \"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line
664,
> in main\n storage_domains_module.post_create_check(sd_id)\n File
> \"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line
526,
> in post_create_check\n id=storage_domain.id,\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053,
in
> add\n return self._internal_add(storage_domain, headers, query, wait)\n
> File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line
232,
> in _internal_add\n return future.wait() if wait else future\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
> wait\n return self._code(response)\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
> callback\n self._check_fault(response)\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
> _check_fault\n self._raise_error(response, body)\n File
> \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
> _raise_error\n raise error\nError: Fault reason is \"Operation
Failed\".
> Fault detail is \"[Cannot attach Storage. There is no active Host in the
> Data Center.]\". HTTP response code is 409.\n",
> "failed": true,
> "msg": "Fault reason is \"Operation Failed\". Fault
detail is
> \"[Cannot attach Storage. There is no active Host in the Data Center.]\".
> HTTP response code is 409."
> }"
>
> I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso. So
> far, I am unable to deploy oVirt single node Hyperconverged...
> Any thoughts ?
>
>
>
> On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi <stirabos(a)redhat.com>
> wrote:
>
>>
>>
>> On Mon, Apr 1, 2019 at 6:14 PM Leo David <leoalex(a)gmail.com> wrote:
>>
>>> Thank you Simone.
>>> I've decides to go for a new fresh install from iso, and i'll keep
>>> posted if any troubles arise. But I am still trying to understand what are
>>> the services that mount the lvms and volumes after configuration. There is
>>> nothing related in fstab, so I assume there are a couple of .mount files
>>> somewhere in the filesystem.
>>> Im just trying to understand node's underneath workflow.
>>>
>>
>> hosted-engine configuration is stored
>> in /etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount
>> the hosted-engine storage domain according to that and so ovirt-ha-agent
>> will be able to start the engine VM.
>> Everything else is just in the engine DB.
>>
>>
>>>
>>> On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi <stirabos(a)redhat.com>
>>> wrote:
>>>
>>>> Hi,
>>>> to understand what's failing I'd suggest to start attaching
setup
>>>> logs.
>>>>
>>>> On Sun, Mar 31, 2019 at 5:06 PM Leo David <leoalex(a)gmail.com>
wrote:
>>>>
>>>>> Hello Everyone,
>>>>> Using 4.3.2 installation, and after running through HyperConverged
>>>>> Setup, at the last stage it fails. It seems that the previously
created
>>>>> "engine" volume is not mounted under "/rhev"
path, therefore the setup
>>>>> cannot finish the deployment.
>>>>> Any ideea which are the services responsible of mounting the volumes
>>>>> on oVirt Node distribution ? I'm thinking that maybe this
particularly one
>>>>> failed to start for some reason...
>>>>> Thank you very much !
>>>>>
>>>>> --
>>>>> Best regards, Leo David
>>>>> _______________________________________________
>>>>> Users mailing list -- users(a)ovirt.org
>>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>>> oVirt Code of Conduct:
>>>>> https://www.ovirt.org/community/about/community-guidelines/
>>>>> List Archives:
>>>>>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>>>>>
>>>>
>
> --
> Best regards, Leo David
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NROCMKIFJDE...
>
--
Thanks,
Gobinda
--
Best regards, Leo David
12:44 p.m.
Is it possible you have not cleared the gluster volume between installs?
What's the corresponding error in vdsm.log?
On Tue, Apr 2, 2019 at 4:07 PM Leo David <leoalex(a)gmail.com> wrote:
>
> And there it is the last lines on the ansible_create_storage_domain log:
>
> 2019-04-02 10:53:49,139+0100 DEBUG var changed: host "localhost" var
"otopi_storage_domain_details" type "<type 'dict'>"
value: "{
> "changed": false,
> "exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 664, in
main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 526, in
post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232, in
_internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in wait\n
return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[]\". HTTP response code is 400.\n",
> "failed": true,
> "msg": "Fault reason is \"Operation Failed\". Fault
detail is \"[]\". HTTP response code is 400."
> }"
> 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost" var
"ansible_play_hosts" type "<type 'list'>" value:
"[]"
> 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost" var
"play_hosts" type "<type 'list'>" value: "[]"
> 2019-04-02 10:53:49,142+0100 DEBUG var changed: host "localhost" var
"ansible_play_batch" type "<type 'list'>" value:
"[]"
> 2019-04-02 10:53:49,142+0100 ERROR ansible failed {'status':
'FAILED', 'ansible_type': 'task', 'ansible_task':
u'Activate storage domain', 'ansible_result': u'type: <type
\'dict\'>\nstr: {\'_ansible_parsed\': True, u\'exception\':
u\'Traceback (most recent call last):\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 664, in
main\\n storage_domains_module.post_create_check(sd_id)\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 526',
'task_duration': 9, 'ansible_host': u'localhost',
'ansible_playbook':
u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml'}
> 2019-04-02 10:53:49,143+0100 DEBUG ansible on_any args
<ansible.executor.task_result.TaskResult object at 0x7f03fd025e50> kwargs
ignore_errors:None
> 2019-04-02 10:53:49,148+0100 INFO ansible stats {
> "ansible_playbook":
"/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml",
> "ansible_playbook_duration": "01:15 Minutes",
> "ansible_result": "type: <type 'dict'>\nstr:
{u'localhost': {'unreachable': 0, 'skipped': 6, 'ok': 23,
'changed': 0, 'failures': 1}}",
> "ansible_type": "finish",
> "status": "FAILED"
> }
> 2019-04-02 10:53:49,149+0100 INFO SUMMARY:
> Duration Task Name
> -------- --------
> [ < 1 sec ] Execute just a specific set of steps
> [ 00:02 ] Force facts gathering
> [ 00:02 ] Check local VM dir stat
> [ 00:02 ] Obtain SSO token using username/password credentials
> [ 00:02 ] Fetch host facts
> [ 00:01 ] Fetch cluster ID
> [ 00:02 ] Fetch cluster facts
> [ 00:02 ] Fetch Datacenter facts
> [ 00:01 ] Fetch Datacenter ID
> [ 00:01 ] Fetch Datacenter name
> [ 00:02 ] Add glusterfs storage domain
> [ 00:02 ] Get storage domain details
> [ 00:02 ] Find the appliance OVF
> [ 00:02 ] Parse OVF
> [ 00:02 ] Get required size
> [ FAILED ] Activate storage domain
>
> Any ideea on how to escalate this issue ?
> It just does not make sense to not be able to install from scratch a fresh node...
>
> Have a nice day !
>
> Leo
>
>
> On Tue, Apr 2, 2019 at 12:11 PM Gobinda Das <godas(a)redhat.com> wrote:
>>
>> Hi Leo,
>> Can you please paste "df -Th" and "gluster v status" out put
?
>> Wanted to make sure engine mounted and volumes and bricks are up.
>> What does vdsm log say?
>>
>> On Tue, Apr 2, 2019 at 2:06 PM Leo David <leoalex(a)gmail.com> wrote:
>>>
>>> Thank you very much !
>>> I have just installed a new fresh node, and triggered the single instance
hyperconverged setup. It seems it fails at the hosted engine final steps of deployment:
>>> INFO ] TASK [ovirt.hosted_engine_setup : Get required size]
>>> [ INFO ] ok: [localhost]
>>> [ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable storage domain]
>>> [ INFO ] skipping: [localhost]
>>> [ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain free space]
>>> [ INFO ] skipping: [localhost]
>>> [ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
>>> [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail
is "[Cannot attach Storage. There is no active Host in the Data Center.]". HTTP
response code is 409.
>>> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg": "Fault reason is \"Operation Failed\". Fault detail is
\"[Cannot attach Storage. There is no active Host in the Data Center.]\". HTTP
response code is 409."}
>>> Also, the
ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log throws the
following:
>>>
>>> 2019-04-02 09:25:40,420+0100 DEBUG var changed: host "localhost"
var "otopi_storage_domain_details" type "<type 'dict'>"
value: "{
>>> "changed": false,
>>> "exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 664, in
main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 526, in
post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232, in
_internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in wait\n
return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[Cannot attach Storage. There is no active Host in the Data
Center.]\". HTTP response code is 409.\n",
>>> "failed": true,
>>> "msg": "Fault reason is \"Operation Failed\".
Fault detail is \"[Cannot attach Storage. There is no active Host in the Data
Center.]\". HTTP response code is 409."
>>> }"
>>>
>>> I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso. So far, I
am unable to deploy oVirt single node Hyperconverged...
>>> Any thoughts ?
>>>
>>>
>>>
>>> On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi <stirabos(a)redhat.com>
wrote:
>>>>
>>>>
>>>>
>>>> On Mon, Apr 1, 2019 at 6:14 PM Leo David <leoalex(a)gmail.com>
wrote:
>>>>>
>>>>> Thank you Simone.
>>>>> I've decides to go for a new fresh install from iso, and i'll
keep posted if any troubles arise. But I am still trying to understand what are the
services that mount the lvms and volumes after configuration. There is nothing related in
fstab, so I assume there are a couple of .mount files somewhere in the filesystem.
>>>>> Im just trying to understand node's underneath workflow.
>>>>
>>>>
>>>> hosted-engine configuration is stored in
/etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount the hosted-engine
storage domain according to that and so ovirt-ha-agent will be able to start the engine
VM.
>>>> Everything else is just in the engine DB.
>>>>
>>>>>
>>>>>
>>>>> On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi
<stirabos(a)redhat.com> wrote:
>>>>>>
>>>>>> Hi,
>>>>>> to understand what's failing I'd suggest to start
attaching setup logs.
>>>>>>
>>>>>> On Sun, Mar 31, 2019 at 5:06 PM Leo David
<leoalex(a)gmail.com> wrote:
>>>>>>>
>>>>>>> Hello Everyone,
>>>>>>> Using 4.3.2 installation, and after running through
HyperConverged Setup, at the last stage it fails. It seems that the previously created
"engine" volume is not mounted under "/rhev" path, therefore the setup
cannot finish the deployment.
>>>>>>> Any ideea which are the services responsible of mounting the
volumes on oVirt Node distribution ? I'm thinking that maybe this particularly one
failed to start for some reason...
>>>>>>> Thank you very much !
>>>>>>>
>>>>>>> --
>>>>>>> Best regards, Leo David
>>>>>>> _______________________________________________
>>>>>>> Users mailing list -- users(a)ovirt.org
>>>>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>>>>> Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
>>>>>>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>>>>>>> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>>>
>>>
>>>
>>> --
>>> Best regards, Leo David
>>> _______________________________________________
>>> Users mailing list -- users(a)ovirt.org
>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NROCMKIFJDE...
>>
>>
>>
>> --
>>
>>
>> Thanks,
>> Gobinda
>
>
>
> --
> Best regards, Leo David
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XDJNBS6EOXC...
4:43 p.m.
Just to loop in, i've forgot to hit "Reply all"
I have deleted everything in the engine gluster mount path, unmounted the
engine gluster volume ( not deleted the volume ) , and started the wizard
with "Use already configured storage". I have pointed to use this gluster
volume, volume gets mounted under the correct path, but installation still
fails:
[ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
"[]".
HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"Fault
reason is \"Operation Failed\". Fault detail is \"[]\". HTTP response
code
is 400."}
On the node's vdsm.log I can continuously see:
2019-04-02 13:02:18,832+0100 INFO (jsonrpc/0) [jsonrpc.JsonRpcServer] RPC
call Host.getStats succeeded in 0.03 seconds (__init__:312)
2019-04-02 13:02:19,906+0100 INFO (vmrecovery) [vdsm.api] START
getConnectedStoragePoolsList(options=None) from=internal,
task_id=769c3983-5160-44e4-b1d8-7ab4e41ddd34 (api:48)
2019-04-02 13:02:19,907+0100 INFO (vmrecovery) [vdsm.api] FINISH
getConnectedStoragePoolsList return={'poollist': []} from=internal,
task_id=769c3983-5160-44e4-b1d8-7ab4e41ddd34 (api:54)
2019-04-02 13:02:19,907+0100 INFO (vmrecovery) [vds] recovery: waiting for
storage pool to go up (clientIF:709)
2019-04-02 13:02:21,737+0100 INFO (periodic/2) [vdsm.api] START
repoStats(domains=()) from=internal,
task_id=ba12fbc1-0170-41a2-82e6-8ccb05ae9e09 (api:48)
2019-04-02 13:02:21,738+0100 INFO (periodic/2) [vdsm.api] FINISH repoStats
return={} from=internal, task_id=ba12fbc1-0170-41a2-82e6-8ccb05ae9e09
(api:54)
Should I perform an "engine-cleanup", delete lvms from Cockpit and start
it all over ?
Did anyone successfully used this particular iso image
"ovirt-node-ng-installer-4.3.2-2019031908.el7.iso" for a single node
installation ?
Thank you !
Leo
On Tue, Apr 2, 2019 at 1:45 PM Sahina Bose <sabose(a)redhat.com> wrote:
Is it possible you have not cleared the gluster volume between
installs?
What's the corresponding error in vdsm.log?
On Tue, Apr 2, 2019 at 4:07 PM Leo David <leoalex(a)gmail.com> wrote:
>
> And there it is the last lines on the ansible_create_storage_domain log:
>
> 2019-04-02 10:53:49,139+0100 DEBUG var changed: host "localhost" var
"otopi_storage_domain_details" type "<type 'dict'>"
value: "{
> "changed": false,
> "exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 664,
in main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 526,
in post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n
File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232,
in _internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
wait\n return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[]\". HTTP response code is 400.\n",
> "failed": true,
> "msg": "Fault reason is \"Operation Failed\". Fault
detail is
\"[]\". HTTP response code is 400."
> }"
> 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost" var
"ansible_play_hosts" type "<type 'list'>" value:
"[]"
> 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost" var
"play_hosts" type "<type 'list'>" value:
"[]"
> 2019-04-02 10:53:49,142+0100 DEBUG var changed: host "localhost" var
"ansible_play_batch" type "<type 'list'>" value:
"[]"
> 2019-04-02 10:53:49,142+0100 ERROR ansible failed {'status':
'FAILED',
'ansible_type': 'task', 'ansible_task': u'Activate storage
domain',
'ansible_result': u'type: <type \'dict\'>\nstr:
{\'_ansible_parsed\': True,
u\'exception\': u\'Traceback (most recent call last):\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 664,
in main\\n storage_domains_module.post_create_check(sd_id)\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 526',
'task_duration': 9, 'ansible_host': u'localhost',
'ansible_playbook':
u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml'}
> 2019-04-02 10:53:49,143+0100 DEBUG ansible on_any args
<ansible.executor.task_result.TaskResult object at 0x7f03fd025e50> kwargs
ignore_errors:None
> 2019-04-02 10:53:49,148+0100 INFO ansible stats {
> "ansible_playbook":
"/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml",
> "ansible_playbook_duration": "01:15 Minutes",
> "ansible_result": "type: <type 'dict'>\nstr:
{u'localhost':
{'unreachable': 0, 'skipped': 6, 'ok': 23, 'changed': 0,
'failures': 1}}",
> "ansible_type": "finish",
> "status": "FAILED"
> }
> 2019-04-02 10:53:49,149+0100 INFO SUMMARY:
> Duration Task Name
> -------- --------
> [ < 1 sec ] Execute just a specific set of steps
> [ 00:02 ] Force facts gathering
> [ 00:02 ] Check local VM dir stat
> [ 00:02 ] Obtain SSO token using username/password credentials
> [ 00:02 ] Fetch host facts
> [ 00:01 ] Fetch cluster ID
> [ 00:02 ] Fetch cluster facts
> [ 00:02 ] Fetch Datacenter facts
> [ 00:01 ] Fetch Datacenter ID
> [ 00:01 ] Fetch Datacenter name
> [ 00:02 ] Add glusterfs storage domain
> [ 00:02 ] Get storage domain details
> [ 00:02 ] Find the appliance OVF
> [ 00:02 ] Parse OVF
> [ 00:02 ] Get required size
> [ FAILED ] Activate storage domain
>
> Any ideea on how to escalate this issue ?
> It just does not make sense to not be able to install from scratch a
fresh node...
>
> Have a nice day !
>
> Leo
>
>
> On Tue, Apr 2, 2019 at 12:11 PM Gobinda Das <godas(a)redhat.com> wrote:
>>
>> Hi Leo,
>> Can you please paste "df -Th" and "gluster v status" out
put ?
>> Wanted to make sure engine mounted and volumes and bricks are up.
>> What does vdsm log say?
>>
>> On Tue, Apr 2, 2019 at 2:06 PM Leo David <leoalex(a)gmail.com> wrote:
>>>
>>> Thank you very much !
>>> I have just installed a new fresh node, and triggered the single
instance hyperconverged setup. It seems it fails at the hosted engine final
steps of deployment:
>>> INFO ] TASK [ovirt.hosted_engine_setup : Get required size]
>>> [ INFO ] ok: [localhost]
>>> [ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable storage
domain]
>>> [ INFO ] skipping: [localhost]
>>> [ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain free
space]
>>> [ INFO ] skipping: [localhost]
>>> [ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
>>> [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail
is
"[Cannot attach Storage. There is no active Host in the Data Center.]".
HTTP response code is 409.
>>> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg":
"Fault reason is \"Operation Failed\". Fault detail is \"[Cannot
attach
Storage. There is no active Host in the Data Center.]\". HTTP response code
is 409."}
>>> Also, the
ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log
throws the following:
>>>
>>> 2019-04-02 09:25:40,420+0100 DEBUG var changed: host "localhost"
var
"otopi_storage_domain_details" type "<type 'dict'>"
value: "{
>>> "changed": false,
>>> "exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 664,
in main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 526,
in post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n
File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232,
in _internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
wait\n return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[Cannot attach Storage. There is no active Host in the
Data Center.]\". HTTP response code is 409.\n",
>>> "failed": true,
>>> "msg": "Fault reason is \"Operation Failed\".
Fault detail is
\"[Cannot attach Storage. There is no active Host in the Data Center.]\".
HTTP response code is 409."
>>> }"
>>>
>>> I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso. So
far, I am unable to deploy oVirt single node Hyperconverged...
>>> Any thoughts ?
>>>
>>>
>>>
>>> On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi
<stirabos(a)redhat.com>
wrote:
>>>>
>>>>
>>>>
>>>> On Mon, Apr 1, 2019 at 6:14 PM Leo David <leoalex(a)gmail.com>
wrote:
>>>>>
>>>>> Thank you Simone.
>>>>> I've decides to go for a new fresh install from iso, and
i'll keep
posted if any troubles arise. But I am still trying to understand what are
the services that mount the lvms and volumes after configuration. There is
nothing related in fstab, so I assume there are a couple of .mount files
somewhere in the filesystem.
>>>>> Im just trying to understand node's underneath workflow.
>>>>
>>>>
>>>> hosted-engine configuration is stored in
/etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount the
hosted-engine storage domain according to that and so ovirt-ha-agent will
be able to start the engine VM.
>>>> Everything else is just in the engine DB.
>>>>
>>>>>
>>>>>
>>>>> On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi
<stirabos(a)redhat.com>
wrote:
>>>>>>
>>>>>> Hi,
>>>>>> to understand what's failing I'd suggest to start
attaching setup
logs.
>>>>>>
>>>>>> On Sun, Mar 31, 2019 at 5:06 PM Leo David
<leoalex(a)gmail.com>
wrote:
>>>>>>>
>>>>>>> Hello Everyone,
>>>>>>> Using 4.3.2 installation, and after running through
HyperConverged
Setup, at the last stage it fails. It seems that the previously created
"engine" volume is not mounted under "/rhev" path, therefore the
setup
cannot finish the deployment.
>>>>>>> Any ideea which are the services responsible of mounting
the
volumes on oVirt Node distribution ? I'm thinking that maybe this
particularly one failed to start for some reason...
>>>>>>> Thank you very much !
>>>>>>>
>>>>>>> --
>>>>>>> Best regards, Leo David
>>>>>>> _______________________________________________
>>>>>>> Users mailing list -- users(a)ovirt.org
>>>>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>>>>> Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
>>>>>>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>>>>>>> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>>>
>>>
>>>
>>> --
>>> Best regards, Leo David
>>> _______________________________________________
>>> Users mailing list -- users(a)ovirt.org
>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NROCMKIFJDE...
>>
>>
>>
>> --
>>
>>
>> Thanks,
>> Gobinda
>
>
>
> --
> Best regards, Leo David
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XDJNBS6EOXC...
--
Best regards, Leo David
5:31 p.m.
On Tue, Apr 2, 2019 at 8:14 PM Leo David <leoalex(a)gmail.com> wrote:
Just to loop in, i've forgot to hit "Reply all"
I have deleted everything in the engine gluster mount path, unmounted the engine gluster
volume ( not deleted the volume ) , and started the wizard with "Use already
configured storage". I have pointed to use this gluster volume, volume gets mounted
under the correct path, but installation still fails:
[ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
"[]". HTTP response code is 400.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"Fault reason is \"Operation Failed\". Fault detail is \"[]\".
HTTP response code is 400."}
And I guess we don't have the engine logs to look at this?
Is there any way you can access the engine console to check?
On the node's vdsm.log I can continuously see:
2019-04-02 13:02:18,832+0100 INFO (jsonrpc/0) [jsonrpc.JsonRpcServer] RPC call
Host.getStats succeeded in 0.03 seconds (__init__:312)
2019-04-02 13:02:19,906+0100 INFO (vmrecovery) [vdsm.api] START
getConnectedStoragePoolsList(options=None) from=internal,
task_id=769c3983-5160-44e4-b1d8-7ab4e41ddd34 (api:48)
2019-04-02 13:02:19,907+0100 INFO (vmrecovery) [vdsm.api] FINISH
getConnectedStoragePoolsList return={'poollist': []} from=internal,
task_id=769c3983-5160-44e4-b1d8-7ab4e41ddd34 (api:54)
2019-04-02 13:02:19,907+0100 INFO (vmrecovery) [vds] recovery: waiting for storage pool
to go up (clientIF:709)
2019-04-02 13:02:21,737+0100 INFO (periodic/2) [vdsm.api] START repoStats(domains=())
from=internal, task_id=ba12fbc1-0170-41a2-82e6-8ccb05ae9e09 (api:48)
2019-04-02 13:02:21,738+0100 INFO (periodic/2) [vdsm.api] FINISH repoStats return={}
from=internal, task_id=ba12fbc1-0170-41a2-82e6-8ccb05ae9e09 (api:54)
Any calls to "START connectStorageServer" in vdsm.log?
Should I perform an "engine-cleanup", delete lvms from
Cockpit and start it all over ?
I doubt if that would resolve issue since you did clean up files from the mount.
Did anyone successfully used this particular iso image
"ovirt-node-ng-installer-4.3.2-2019031908.el7.iso" for a single node
installation ?
Sorry, don't know.
> Thank you !
> Leo
>
> On Tue, Apr 2, 2019 at 1:45 PM Sahina Bose <sabose(a)redhat.com> wrote:
>>
>> Is it possible you have not cleared the gluster volume between installs?
>>
>> What's the corresponding error in vdsm.log?
>>
>>
>> On Tue, Apr 2, 2019 at 4:07 PM Leo David <leoalex(a)gmail.com> wrote:
>> >
>> > And there it is the last lines on the ansible_create_storage_domain log:
>> >
>> > 2019-04-02 10:53:49,139+0100 DEBUG var changed: host "localhost"
var "otopi_storage_domain_details" type "<type 'dict'>"
value: "{
>> > "changed": false,
>> > "exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 664, in
main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 526, in
post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232, in
_internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in wait\n
return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[]\". HTTP response code is 400.\n",
>> > "failed": true,
>> > "msg": "Fault reason is \"Operation Failed\".
Fault detail is \"[]\". HTTP response code is 400."
>> > }"
>> > 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost"
var "ansible_play_hosts" type "<type 'list'>" value:
"[]"
>> > 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost"
var "play_hosts" type "<type 'list'>" value:
"[]"
>> > 2019-04-02 10:53:49,142+0100 DEBUG var changed: host "localhost"
var "ansible_play_batch" type "<type 'list'>" value:
"[]"
>> > 2019-04-02 10:53:49,142+0100 ERROR ansible failed {'status':
'FAILED', 'ansible_type': 'task', 'ansible_task':
u'Activate storage domain', 'ansible_result': u'type: <type
\'dict\'>\nstr: {\'_ansible_parsed\': True, u\'exception\':
u\'Traceback (most recent call last):\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 664, in
main\\n storage_domains_module.post_create_check(sd_id)\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 526',
'task_duration': 9, 'ansible_host': u'localhost',
'ansible_playbook':
u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml'}
>> > 2019-04-02 10:53:49,143+0100 DEBUG ansible on_any args
<ansible.executor.task_result.TaskResult object at 0x7f03fd025e50> kwargs
ignore_errors:None
>> > 2019-04-02 10:53:49,148+0100 INFO ansible stats {
>> > "ansible_playbook":
"/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml",
>> > "ansible_playbook_duration": "01:15 Minutes",
>> > "ansible_result": "type: <type
'dict'>\nstr: {u'localhost': {'unreachable': 0,
'skipped': 6, 'ok': 23, 'changed': 0, 'failures':
1}}",
>> > "ansible_type": "finish",
>> > "status": "FAILED"
>> > }
>> > 2019-04-02 10:53:49,149+0100 INFO SUMMARY:
>> > Duration Task Name
>> > -------- --------
>> > [ < 1 sec ] Execute just a specific set of steps
>> > [ 00:02 ] Force facts gathering
>> > [ 00:02 ] Check local VM dir stat
>> > [ 00:02 ] Obtain SSO token using username/password credentials
>> > [ 00:02 ] Fetch host facts
>> > [ 00:01 ] Fetch cluster ID
>> > [ 00:02 ] Fetch cluster facts
>> > [ 00:02 ] Fetch Datacenter facts
>> > [ 00:01 ] Fetch Datacenter ID
>> > [ 00:01 ] Fetch Datacenter name
>> > [ 00:02 ] Add glusterfs storage domain
>> > [ 00:02 ] Get storage domain details
>> > [ 00:02 ] Find the appliance OVF
>> > [ 00:02 ] Parse OVF
>> > [ 00:02 ] Get required size
>> > [ FAILED ] Activate storage domain
>> >
>> > Any ideea on how to escalate this issue ?
>> > It just does not make sense to not be able to install from scratch a fresh
node...
>> >
>> > Have a nice day !
>> >
>> > Leo
>> >
>> >
>> > On Tue, Apr 2, 2019 at 12:11 PM Gobinda Das <godas(a)redhat.com> wrote:
>> >>
>> >> Hi Leo,
>> >> Can you please paste "df -Th" and "gluster v
status" out put ?
>> >> Wanted to make sure engine mounted and volumes and bricks are up.
>> >> What does vdsm log say?
>> >>
>> >> On Tue, Apr 2, 2019 at 2:06 PM Leo David <leoalex(a)gmail.com>
wrote:
>> >>>
>> >>> Thank you very much !
>> >>> I have just installed a new fresh node, and triggered the single
instance hyperconverged setup. It seems it fails at the hosted engine final steps of
deployment:
>> >>> INFO ] TASK [ovirt.hosted_engine_setup : Get required size]
>> >>> [ INFO ] ok: [localhost]
>> >>> [ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable storage
domain]
>> >>> [ INFO ] skipping: [localhost]
>> >>> [ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain free
space]
>> >>> [ INFO ] skipping: [localhost]
>> >>> [ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
>> >>> [ ERROR ] Error: Fault reason is "Operation Failed". Fault
detail is "[Cannot attach Storage. There is no active Host in the Data
Center.]". HTTP response code is 409.
>> >>> [ ERROR ] fatal: [localhost]: FAILED! => {"changed":
false, "msg": "Fault reason is \"Operation Failed\". Fault detail
is \"[Cannot attach Storage. There is no active Host in the Data Center.]\".
HTTP response code is 409."}
>> >>> Also, the
ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log throws the
following:
>> >>>
>> >>> 2019-04-02 09:25:40,420+0100 DEBUG var changed: host
"localhost" var "otopi_storage_domain_details" type "<type
'dict'>" value: "{
>> >>> "changed": false,
>> >>> "exception": "Traceback (most recent call
last):\n File \"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\",
line 664, in main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 526, in
post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232, in
_internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in wait\n
return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[Cannot attach Storage. There is no active Host in the Data
Center.]\". HTTP response code is 409.\n",
>> >>> "failed": true,
>> >>> "msg": "Fault reason is \"Operation
Failed\". Fault detail is \"[Cannot attach Storage. There is no active Host in
the Data Center.]\". HTTP response code is 409."
>> >>> }"
>> >>>
>> >>> I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso. So
far, I am unable to deploy oVirt single node Hyperconverged...
>> >>> Any thoughts ?
>> >>>
>> >>>
>> >>>
>> >>> On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi
<stirabos(a)redhat.com> wrote:
>> >>>>
>> >>>>
>> >>>>
>> >>>> On Mon, Apr 1, 2019 at 6:14 PM Leo David
<leoalex(a)gmail.com> wrote:
>> >>>>>
>> >>>>> Thank you Simone.
>> >>>>> I've decides to go for a new fresh install from iso, and
i'll keep posted if any troubles arise. But I am still trying to understand what are
the services that mount the lvms and volumes after configuration. There is nothing related
in fstab, so I assume there are a couple of .mount files somewhere in the filesystem.
>> >>>>> Im just trying to understand node's underneath
workflow.
>> >>>>
>> >>>>
>> >>>> hosted-engine configuration is stored in
/etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount the hosted-engine
storage domain according to that and so ovirt-ha-agent will be able to start the engine
VM.
>> >>>> Everything else is just in the engine DB.
>> >>>>
>> >>>>>
>> >>>>>
>> >>>>> On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi
<stirabos(a)redhat.com> wrote:
>> >>>>>>
>> >>>>>> Hi,
>> >>>>>> to understand what's failing I'd suggest to
start attaching setup logs.
>> >>>>>>
>> >>>>>> On Sun, Mar 31, 2019 at 5:06 PM Leo David
<leoalex(a)gmail.com> wrote:
>> >>>>>>>
>> >>>>>>> Hello Everyone,
>> >>>>>>> Using 4.3.2 installation, and after running through
HyperConverged Setup, at the last stage it fails. It seems that the previously created
"engine" volume is not mounted under "/rhev" path, therefore the setup
cannot finish the deployment.
>> >>>>>>> Any ideea which are the services responsible of
mounting the volumes on oVirt Node distribution ? I'm thinking that maybe this
particularly one failed to start for some reason...
>> >>>>>>> Thank you very much !
>> >>>>>>>
>> >>>>>>> --
>> >>>>>>> Best regards, Leo David
>> >>>>>>> _______________________________________________
>> >>>>>>> Users mailing list -- users(a)ovirt.org
>> >>>>>>> To unsubscribe send an email to
users-leave(a)ovirt.org
>> >>>>>>> Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
>> >>>>>>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>> >>>>>>> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> Best regards, Leo David
>> >>> _______________________________________________
>> >>> Users mailing list -- users(a)ovirt.org
>> >>> To unsubscribe send an email to users-leave(a)ovirt.org
>> >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> >>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>> >>> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NROCMKIFJDE...
>> >>
>> >>
>> >>
>> >> --
>> >>
>> >>
>> >> Thanks,
>> >> Gobinda
>> >
>> >
>> >
>> > --
>> > Best regards, Leo David
>> > _______________________________________________
>> > Users mailing list -- users(a)ovirt.org
>> > To unsubscribe send an email to users-leave(a)ovirt.org
>> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> > oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>> > List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XDJNBS6EOXC...
>
>
>
> --
> Best regards, Leo David
7:36 p.m.
Hi,
Started from scratch...
And all the things became more strange. First of all, after adding fqdn
names for both management and gluster interface in /etc/hosts ( ip address
specification for gluster nodes is not possible because of a known bug )
and although i had proper dns resolving for gluster fqdn address ,
installation went almost to finnish:
[ INFO ] TASK [ovirt.hosted_engine_setup : Wait for the local bootstrap VM
to be down at engine eyes]
[ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts":
{"ovirt_vms":
[{"affinity_labels": [], "applications": [], "bios":
{"boot_menu":
{"enabled": false}, "type": "i440fx_sea_bios"},
"cdroms": [], "cluster":
{"href":
"/ovirt-engine/api/clusters/b4eb4bba-5564-11e9-82f1-00163e41da1e",
"id": "b4eb4bba-5564-11e9-82f1-00163e41da1e"}, "comment":
"", "cpu":
{"architecture": "x86_64", "topology": {"cores":
1, "sockets": 8,
"threads": 1}}, "cpu_profile": {"href":
"/ovirt-engine/api/cpuprofiles/58ca604e-01a7-003f-01de-000000000250",
"id":
"58ca604e-01a7-003f-01de-000000000250"}, "cpu_shares": 0,
"creation_time":
"2019-04-02 17:42:48.463000+01:00", "delete_protected": false,
"description": "", "disk_attachments": [],
"display": {"address":
"127.0.0.1", "allow_override": false, "certificate":
{"content":
"-----BEGIN
CERTIFICATE-----\nMIID9DCCAtygAwIBAgICEAAwDQYJKoZIhvcNAQELBQAwWDELMAkGA1UEBhMCVVMxFTATBgNVBAoM\nDHN5bmNyYXN5LmxhYjEyMDAGA1UEAwwpdmlydHVhbGlzYXRpb24tc2FuZGJveC5zeW5jcmFzeS5s\nYWIuNDk5NjcwHhcNMTkwNDAxMTYzMDA5WhcNMjkwMzMwMTYzMDA5WjBYMQswCQYDVQQGEwJVUzEV\nMBMGA1UECgwMc3luY3Jhc3kubGFiMTIwMAYDVQQDDCl2aXJ0dWFsaXNhdGlvbi1zYW5kYm94LnN5\nbmNyYXN5LmxhYi40OTk2NzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBANdcj83LBAsU\nLUS18TIKmFG4pFj0a3VR1r3gfA9+FBVzm60dmIs7zmFR843xQjNTe4n6+uJCbQ09XdOSUyRpWi+9\nq4T5nL4kHbEnPbMUnQ9TDf3bX3S6SQXN678JELobeBDRaV89kGMCsjb7boQUofs3ScMduK77Fmvf\nyhCBVomo2nS8R9FQsv7KnR+3UXPQ1LQ30gv0hRs22vRWUB8ljCh1BCEDBMh1xdDLRI+jhf3mqMZc\n3Sb6qeLyslB9p1kmb/s2wxvdrjrsvpNSpQeZbi7r0FhbkH1GMgsi8V9NGaX3zKwPDgdYt18H2k5K\niRGpF2dWBxxeBPY9R7P+5tKIflcCAwEAAaOBxzCBxDAdBgNVHQ4EFgQUyKAePwI5dLdXIpWuqDDY\njS5S0dMwgYEGA1UdIwR6MHiAFMigHj8COXS3VyKVrqgw2I0uUtHToVykWjBYMQswCQYDVQQGEwJV\nUzEVMBMGA1UECgwMc3luY3Jhc3kubGFiMTIwMAYDVQQDDCl2aXJ0dWFsaXNhdGlvbi1zYW5kYm94\nLnN5bmNyYXN5LmxhYi40OTk2N4ICEAAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMCAQYw\nDQYJKoZIhvcNAQELBQADggEBAElAlZvQZHep9ujnvJ3cOGe1bHeRpvFyThAb3YEpG9LRx91jYl+N\ndd6YmIa/wbUt9/SIwlsB5lOzbwI47yFK9zRjjIfR1nDuv5aDL+ZQhoU0zTypa3dx6OZekx11VGyF\ndFBMFSYVM2uiSaKzLB9clQjCMiLpiT00zfpCBDrORrpIJjWNWyC5AJiq0CXPQzTUq5Lylafe6fhH\nJab3bxrCDkREgb3eZN9uuT12BxrVtJkF4QaonTn2o/62hEOyVy6v8vyC66r4lz7AGwVIkuxa2bXU\nQvIhfhm1mC4ZFzKPMcJzpW0ze+OCoFPYaQFDmiO210j7prZaPobvq7JCBh1GleM=\n-----END
CERTIFICATE-----\n", "organization": "internal.lab",
"subject":
"O=internal.lab,CN=c6100-ch3-node1.internal.lab"},
"copy_paste_enabled":
true, "disconnect_action": "LOCK_SCREEN",
"file_transfer_enabled": true,
"monitors": 1, "port": 5900, "single_qxl_pci": false,
"smartcard_enabled":
false, "type": "vnc"}, "fqdn":
"virtualisation-sandbox.internal.lab",
"graphics_consoles": [], "guest_operating_system":
{"architecture":
"x86_64", "codename": "", "distribution":
"CentOS Linux", "family":
"Linux", "kernel": {"version": {"build": 0,
"full_version":
"3.10.0-957.10.1.el7.x86_64", "major": 3, "minor": 10,
"revision": 957}},
"version": {"full_version": "7", "major": 7}},
"guest_time_zone": {"name":
"BST", "utc_offset": "+01:00"},
"high_availability": {"enabled": false,
"priority": 0}, "host": {"href":
"/ovirt-engine/api/hosts/740c07ae-504a-49b5-967c-676fd6ca16c3", "id":
"740c07ae-504a-49b5-967c-676fd6ca16c3"}, "host_devices": [],
"href":
"/ovirt-engine/api/vms/780c584b-28fa-4bde-af02-99b296522d17", "id":
"780c584b-28fa-4bde-af02-99b296522d17", "io": {"threads":
1},
"katello_errata": [], "large_icon": {"href":
"/ovirt-engine/api/icons/defaf775-731c-4e75-8c51-9119ac6dc689", "id":
"defaf775-731c-4e75-8c51-9119ac6dc689"}, "memory": 34359738368,
"memory_policy": {"guaranteed": 34359738368, "max":
34359738368},
"migration": {"auto_converge": "inherit",
"compressed": "inherit"},
"migration_downtime": -1, "multi_queues_enabled": true,
"name":
"external-HostedEngineLocal", "next_run_configuration_exists": false,
"nics": [], "numa_nodes": [], "numa_tune_mode":
"interleave", "origin":
"external", "original_template": {"href":
"/ovirt-engine/api/templates/00000000-0000-0000-0000-000000000000",
"id":
"00000000-0000-0000-0000-000000000000"}, "os": {"boot":
{"devices":
["hd"]}, "type": "other"}, "permissions": [],
"placement_policy":
{"affinity": "migratable"}, "quota": {"id":
"d27a97ee-5564-11e9-bba0-00163e41da1e"}, "reported_devices": [],
"run_once": false, "sessions": [], "small_icon":
{"href":
"/ovirt-engine/api/icons/a29967f4-53e5-4acc-92d8-4a971b54e655", "id":
"a29967f4-53e5-4acc-92d8-4a971b54e655"}, "snapshots": [],
"sso":
{"methods": [{"id": "guest_agent"}]},
"start_paused": false, "stateless":
false, "statistics": [], "status": "up",
"storage_error_resume_behaviour":
"auto_resume", "tags": [], "template": {"href":
"/ovirt-engine/api/templates/00000000-0000-0000-0000-000000000000",
"id":
"00000000-0000-0000-0000-000000000000"}, "time_zone":
{"name": "Etc/GMT"},
"type": "desktop", "usb": {"enabled": false},
"watchdogs": []}]},
"attempts": 24, "changed": false}
The engine eventually went up, and i could login into the UI. Here, i've I
have found an additional stopped vm called "external-HostedEngineLocal" - i
assume the playbook didnt managed to delete it.
I just don't know what to say, if this installation is reliable considering
it is a fresh installation from official iso image...
Do you think it would be better to wait for the next release when hopefully
gluster 5.5 will be integrated too ?
Thank very much for your answers !
On Tue, Apr 2, 2019 at 6:31 PM Sahina Bose <sabose(a)redhat.com> wrote:
On Tue, Apr 2, 2019 at 8:14 PM Leo David <leoalex(a)gmail.com>
wrote:
>
> Just to loop in, i've forgot to hit "Reply all"
>
> I have deleted everything in the engine gluster mount path, unmounted
the engine gluster volume ( not deleted the volume ) , and started the
wizard with "Use already configured storage". I have pointed to use this
gluster volume, volume gets mounted under the correct path, but
installation still fails:
>
> [ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain]
> [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
"[]". HTTP response code is 400.
> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg":
"Fault reason is \"Operation Failed\". Fault detail is \"[]\".
HTTP
response code is 400."}
And I guess we don't have the engine logs to look at this?
Is there any way you can access the engine console to check?
>
> On the node's vdsm.log I can continuously see:
> 2019-04-02 13:02:18,832+0100 INFO (jsonrpc/0) [jsonrpc.JsonRpcServer]
RPC call Host.getStats succeeded in 0.03 seconds (__init__:312)
> 2019-04-02 13:02:19,906+0100 INFO (vmrecovery) [vdsm.api] START
getConnectedStoragePoolsList(options=None) from=internal,
task_id=769c3983-5160-44e4-b1d8-7ab4e41ddd34 (api:48)
> 2019-04-02 13:02:19,907+0100 INFO (vmrecovery) [vdsm.api] FINISH
getConnectedStoragePoolsList return={'poollist': []} from=internal,
task_id=769c3983-5160-44e4-b1d8-7ab4e41ddd34 (api:54)
> 2019-04-02 13:02:19,907+0100 INFO (vmrecovery) [vds] recovery: waiting
for storage pool to go up (clientIF:709)
> 2019-04-02 13:02:21,737+0100 INFO (periodic/2) [vdsm.api] START
repoStats(domains=()) from=internal,
task_id=ba12fbc1-0170-41a2-82e6-8ccb05ae9e09 (api:48)
> 2019-04-02 13:02:21,738+0100 INFO (periodic/2) [vdsm.api] FINISH
repoStats return={} from=internal,
task_id=ba12fbc1-0170-41a2-82e6-8ccb05ae9e09 (api:54)
>
Any calls to "START connectStorageServer" in vdsm.log?
> Should I perform an "engine-cleanup", delete lvms from Cockpit and
start it all over ?
I doubt if that would resolve issue since you did clean up files from the
mount.
> Did anyone successfully used this particular iso image
"ovirt-node-ng-installer-4.3.2-2019031908.el7.iso" for a single node
installation ?
Sorry, don't know.
> Thank you !
> Leo
>
> On Tue, Apr 2, 2019 at 1:45 PM Sahina Bose <sabose(a)redhat.com> wrote:
>>
>> Is it possible you have not cleared the gluster volume between installs?
>>
>> What's the corresponding error in vdsm.log?
>>
>>
>> On Tue, Apr 2, 2019 at 4:07 PM Leo David <leoalex(a)gmail.com> wrote:
>> >
>> > And there it is the last lines on the ansible_create_storage_domain
log:
>> >
>> > 2019-04-02 10:53:49,139+0100 DEBUG var changed: host "localhost"
var
"otopi_storage_domain_details" type "<type 'dict'>"
value: "{
>> > "changed": false,
>> > "exception": "Traceback (most recent call last):\n
File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 664,
in main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 526,
in post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n
File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232,
in _internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
wait\n return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[]\". HTTP response code is 400.\n",
>> > "failed": true,
>> > "msg": "Fault reason is \"Operation Failed\".
Fault detail is
\"[]\". HTTP response code is 400."
>> > }"
>> > 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost"
var
"ansible_play_hosts" type "<type 'list'>" value:
"[]"
>> > 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost"
var
"play_hosts" type "<type 'list'>" value:
"[]"
>> > 2019-04-02 10:53:49,142+0100 DEBUG var changed: host "localhost"
var
"ansible_play_batch" type "<type 'list'>" value:
"[]"
>> > 2019-04-02 10:53:49,142+0100 ERROR ansible failed {'status':
'FAILED', 'ansible_type': 'task', 'ansible_task':
u'Activate storage
domain', 'ansible_result': u'type: <type \'dict\'>\nstr:
{\'_ansible_parsed\': True, u\'exception\': u\'Traceback (most recent
call
last):\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 664,
in main\\n storage_domains_module.post_create_check(sd_id)\\n File
"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 526',
'task_duration': 9, 'ansible_host': u'localhost',
'ansible_playbook':
u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml'}
>> > 2019-04-02 10:53:49,143+0100 DEBUG ansible on_any args
<ansible.executor.task_result.TaskResult object at 0x7f03fd025e50> kwargs
ignore_errors:None
>> > 2019-04-02 10:53:49,148+0100 INFO ansible stats {
>> > "ansible_playbook":
"/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml",
>> > "ansible_playbook_duration": "01:15 Minutes",
>> > "ansible_result": "type: <type
'dict'>\nstr: {u'localhost':
{'unreachable': 0, 'skipped': 6, 'ok': 23, 'changed': 0,
'failures': 1}}",
>> > "ansible_type": "finish",
>> > "status": "FAILED"
>> > }
>> > 2019-04-02 10:53:49,149+0100 INFO SUMMARY:
>> > Duration Task Name
>> > -------- --------
>> > [ < 1 sec ] Execute just a specific set of steps
>> > [ 00:02 ] Force facts gathering
>> > [ 00:02 ] Check local VM dir stat
>> > [ 00:02 ] Obtain SSO token using username/password credentials
>> > [ 00:02 ] Fetch host facts
>> > [ 00:01 ] Fetch cluster ID
>> > [ 00:02 ] Fetch cluster facts
>> > [ 00:02 ] Fetch Datacenter facts
>> > [ 00:01 ] Fetch Datacenter ID
>> > [ 00:01 ] Fetch Datacenter name
>> > [ 00:02 ] Add glusterfs storage domain
>> > [ 00:02 ] Get storage domain details
>> > [ 00:02 ] Find the appliance OVF
>> > [ 00:02 ] Parse OVF
>> > [ 00:02 ] Get required size
>> > [ FAILED ] Activate storage domain
>> >
>> > Any ideea on how to escalate this issue ?
>> > It just does not make sense to not be able to install from scratch a
fresh node...
>> >
>> > Have a nice day !
>> >
>> > Leo
>> >
>> >
>> > On Tue, Apr 2, 2019 at 12:11 PM Gobinda Das <godas(a)redhat.com>
wrote:
>> >>
>> >> Hi Leo,
>> >> Can you please paste "df -Th" and "gluster v
status" out put ?
>> >> Wanted to make sure engine mounted and volumes and bricks are up.
>> >> What does vdsm log say?
>> >>
>> >> On Tue, Apr 2, 2019 at 2:06 PM Leo David <leoalex(a)gmail.com>
wrote:
>> >>>
>> >>> Thank you very much !
>> >>> I have just installed a new fresh node, and triggered the single
instance hyperconverged setup. It seems it fails at the hosted engine final
steps of deployment:
>> >>> INFO ] TASK [ovirt.hosted_engine_setup : Get required size]
>> >>> [ INFO ] ok: [localhost]
>> >>> [ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable
storage domain]
>> >>> [ INFO ] skipping: [localhost]
>> >>> [ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain
free space]
>> >>> [ INFO ] skipping: [localhost]
>> >>> [ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage
domain]
>> >>> [ ERROR ] Error: Fault reason is "Operation Failed".
Fault detail
is "[Cannot attach Storage. There is no active Host in the Data Center.]".
HTTP response code is 409.
>> >>> [ ERROR ] fatal: [localhost]: FAILED! => {"changed":
false, "msg":
"Fault reason is \"Operation Failed\". Fault detail is \"[Cannot
attach
Storage. There is no active Host in the Data Center.]\". HTTP response code
is 409."}
>> >>> Also, the
ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log
throws the following:
>> >>>
>> >>> 2019-04-02 09:25:40,420+0100 DEBUG var changed: host
"localhost"
var "otopi_storage_domain_details" type "<type 'dict'>"
value: "{
>> >>> "changed": false,
>> >>> "exception": "Traceback (most recent call
last):\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 664,
in main\n storage_domains_module.post_create_check(sd_id)\n File
\"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 526,
in post_create_check\n id=storage_domain.id,\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in
add\n return self._internal_add(storage_domain, headers, query, wait)\n
File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232,
in _internal_add\n return future.wait() if wait else future\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in
wait\n return self._code(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in
callback\n self._check_fault(response)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in
_check_fault\n self._raise_error(response, body)\n File
\"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in
_raise_error\n raise error\nError: Fault reason is \"Operation Failed\".
Fault detail is \"[Cannot attach Storage. There is no active Host in the
Data Center.]\". HTTP response code is 409.\n",
>> >>> "failed": true,
>> >>> "msg": "Fault reason is \"Operation
Failed\". Fault detail is
\"[Cannot attach Storage. There is no active Host in the Data Center.]\".
HTTP response code is 409."
>> >>> }"
>> >>>
>> >>> I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso.
So far, I am unable to deploy oVirt single node Hyperconverged...
>> >>> Any thoughts ?
>> >>>
>> >>>
>> >>>
>> >>> On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi <
stirabos(a)redhat.com> wrote:
>> >>>>
>> >>>>
>> >>>>
>> >>>> On Mon, Apr 1, 2019 at 6:14 PM Leo David
<leoalex(a)gmail.com>
wrote:
>> >>>>>
>> >>>>> Thank you Simone.
>> >>>>> I've decides to go for a new fresh install from iso,
and i'll
keep posted if any troubles arise. But I am still trying to understand what
are the services that mount the lvms and volumes after configuration. There
is nothing related in fstab, so I assume there are a couple of .mount files
somewhere in the filesystem.
>> >>>>> Im just trying to understand node's underneath
workflow.
>> >>>>
>> >>>>
>> >>>> hosted-engine configuration is stored in
/etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount the
hosted-engine storage domain according to that and so ovirt-ha-agent will
be able to start the engine VM.
>> >>>> Everything else is just in the engine DB.
>> >>>>
>> >>>>>
>> >>>>>
>> >>>>> On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi
<stirabos(a)redhat.com>
wrote:
>> >>>>>>
>> >>>>>> Hi,
>> >>>>>> to understand what's failing I'd suggest to
start attaching
setup logs.
>> >>>>>>
>> >>>>>> On Sun, Mar 31, 2019 at 5:06 PM Leo David
<leoalex(a)gmail.com>
wrote:
>> >>>>>>>
>> >>>>>>> Hello Everyone,
>> >>>>>>> Using 4.3.2 installation, and after running
through
HyperConverged Setup, at the last stage it fails. It seems that the
previously created "engine" volume is not mounted under "/rhev"
path,
therefore the setup cannot finish the deployment.
>> >>>>>>> Any ideea which are the services responsible of
mounting the
volumes on oVirt Node distribution ? I'm thinking that maybe this
particularly one failed to start for some reason...
>> >>>>>>> Thank you very much !
>> >>>>>>>
>> >>>>>>> --
>> >>>>>>> Best regards, Leo David
>> >>>>>>> _______________________________________________
>> >>>>>>> Users mailing list -- users(a)ovirt.org
>> >>>>>>> To unsubscribe send an email to
users-leave(a)ovirt.org
>> >>>>>>> Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
>> >>>>>>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>> >>>>>>> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZW...
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> Best regards, Leo David
>> >>> _______________________________________________
>> >>> Users mailing list -- users(a)ovirt.org
>> >>> To unsubscribe send an email to users-leave(a)ovirt.org
>> >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> >>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>> >>> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NROCMKIFJDE...
>> >>
>> >>
>> >>
>> >> --
>> >>
>> >>
>> >> Thanks,
>> >> Gobinda
>> >
>> >
>> >
>> > --
>> > Best regards, Leo David
>> > _______________________________________________
>> > Users mailing list -- users(a)ovirt.org
>> > To unsubscribe send an email to users-leave(a)ovirt.org
>> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> > oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
>> > List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XDJNBS6EOXC...
>
>
>
> --
> Best regards, Leo David
--
Best regards, Leo David
1871
days inactive
1873
days old
11 comments
4 participants
participants (4)
-
Gobinda Das -
Leo David -
Sahina Bose -
Simone Tiraboschi