Broken doco link for New Host->Kernel boot parameters
Hi, I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host. https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings... Anyone know where this went or can help me with the options? Shareef.
On April 16, 2020 6:22:35 PM GMT+03:00, Shareef Jalloq <shareef@jalloq.co.uk> wrote:
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings...
Anyone know where this went or can help me with the options?
Shareef.
In order to change a kernel parameter - set the host into maintenance -> edit the host -> kernel -> put ticks where necessary or type your kernel parameter and save. Next use the 'Installation' dropdown and select reinstall. Once it's over - reboot the host from UI. At least this is the way I have enabled nested virtualization. Best Regards, Strahil Nikolov
There are lots of dead links in older docs. Look at the 4.4 docs for updated info. Eric Evans Digital Data Services LLC. 304.660.9080 From: Shareef Jalloq <shareef@jalloq.co.uk> Sent: Thursday, April 16, 2020 11:23 AM To: Ovirt Users <users@ovirt.org> Subject: [ovirt-users] Broken doco link for New Host->Kernel boot parameters Hi, I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host. https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings... Anyone know where this went or can help me with the options? Shareef.
You mean somewhere other than https://www.ovirt.org/documentation/? On Thu, Apr 16, 2020 at 6:18 PM <eevans@digitaldatatechs.com> wrote:
There are lots of dead links in older docs. Look at the 4.4 docs for updated info.
Eric Evans
Digital Data Services LLC.
304.660.9080
*From:* Shareef Jalloq <shareef@jalloq.co.uk> *Sent:* Thursday, April 16, 2020 11:23 AM *To:* Ovirt Users <users@ovirt.org> *Subject:* [ovirt-users] Broken doco link for New Host->Kernel boot parameters
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings...
Anyone know where this went or can help me with the options?
Shareef.
Thanks. The Installation->Reinstall was something I missed but that doesn't seem to have helped. The host info still says that 'Device Passthrough' is Disabled. I'm sure I enabled everything I needed to in the BIOS but will have to double check. This is an old motherboard without IPMI though. Meh. On Thu, Apr 16, 2020 at 6:04 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:
On April 16, 2020 6:22:35 PM GMT+03:00, Shareef Jalloq < shareef@jalloq.co.uk> wrote:
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings...
Anyone know where this went or can help me with the options?
Shareef.
In order to change a kernel parameter - set the host into maintenance -> edit the host -> kernel -> put ticks where necessary or type your kernel parameter and save. Next use the 'Installation' dropdown and select reinstall. Once it's over - reboot the host from UI.
At least this is the way I have enabled nested virtualization.
Best Regards, Strahil Nikolov
That’s the one. If there’s a dead link here, it needs reported. Eric Evans Digital Data Services LLC. 304.660.9080 From: Shareef Jalloq <shareef@jalloq.co.uk> Sent: Thursday, April 16, 2020 1:21 PM To: eevans@digitaldatatechs.com Cc: Ovirt Users <users@ovirt.org> Subject: Re: [ovirt-users] Broken doco link for New Host->Kernel boot parameters You mean somewhere other than https://www.ovirt.org/documentation/? On Thu, Apr 16, 2020 at 6:18 PM <eevans@digitaldatatechs.com <mailto:eevans@digitaldatatechs.com> > wrote: There are lots of dead links in older docs. Look at the 4.4 docs for updated info. Eric Evans Digital Data Services LLC. 304.660.9080 From: Shareef Jalloq <shareef@jalloq.co.uk <mailto:shareef@jalloq.co.uk> > Sent: Thursday, April 16, 2020 11:23 AM To: Ovirt Users <users@ovirt.org <mailto:users@ovirt.org> > Subject: [ovirt-users] Broken doco link for New Host->Kernel boot parameters Hi, I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host. https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings... Anyone know where this went or can help me with the options? Shareef.
Will do. On Thu, Apr 16, 2020 at 6:23 PM <eevans@digitaldatatechs.com> wrote:
That’s the one. If there’s a dead link here, it needs reported.
Eric Evans
Digital Data Services LLC.
304.660.9080
*From:* Shareef Jalloq <shareef@jalloq.co.uk> *Sent:* Thursday, April 16, 2020 1:21 PM *To:* eevans@digitaldatatechs.com *Cc:* Ovirt Users <users@ovirt.org> *Subject:* Re: [ovirt-users] Broken doco link for New Host->Kernel boot parameters
You mean somewhere other than https://www.ovirt.org/documentation/?
On Thu, Apr 16, 2020 at 6:18 PM <eevans@digitaldatatechs.com> wrote:
There are lots of dead links in older docs. Look at the 4.4 docs for updated info.
Eric Evans
Digital Data Services LLC.
304.660.9080
*From:* Shareef Jalloq <shareef@jalloq.co.uk> *Sent:* Thursday, April 16, 2020 11:23 AM *To:* Ovirt Users <users@ovirt.org> *Subject:* [ovirt-users] Broken doco link for New Host->Kernel boot parameters
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings...
Anyone know where this went or can help me with the options?
Shareef.
Looks like someone has already reported most of the broken links including this one: https://github.com/oVirt/ovirt-site/issues/1228. On Thu, Apr 16, 2020 at 6:35 PM Shareef Jalloq <shareef@jalloq.co.uk> wrote:
Will do.
On Thu, Apr 16, 2020 at 6:23 PM <eevans@digitaldatatechs.com> wrote:
That’s the one. If there’s a dead link here, it needs reported.
Eric Evans
Digital Data Services LLC.
304.660.9080
*From:* Shareef Jalloq <shareef@jalloq.co.uk> *Sent:* Thursday, April 16, 2020 1:21 PM *To:* eevans@digitaldatatechs.com *Cc:* Ovirt Users <users@ovirt.org> *Subject:* Re: [ovirt-users] Broken doco link for New Host->Kernel boot parameters
You mean somewhere other than https://www.ovirt.org/documentation/?
On Thu, Apr 16, 2020 at 6:18 PM <eevans@digitaldatatechs.com> wrote:
There are lots of dead links in older docs. Look at the 4.4 docs for updated info.
Eric Evans
Digital Data Services LLC.
304.660.9080
*From:* Shareef Jalloq <shareef@jalloq.co.uk> *Sent:* Thursday, April 16, 2020 11:23 AM *To:* Ovirt Users <users@ovirt.org> *Subject:* [ovirt-users] Broken doco link for New Host->Kernel boot parameters
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings...
Anyone know where this went or can help me with the options?
Shareef.
Under the vm advanced options, under host. You chose a specific host then allow passthrough or pinning. Eric Evans Digital Data Services LLC. 304.660.9080 From: Shareef Jalloq <shareef@jalloq.co.uk> Sent: Thursday, April 16, 2020 1:22 PM To: Strahil Nikolov <hunter86_bg@yahoo.com> Cc: Ovirt Users <users@ovirt.org> Subject: [ovirt-users] Re: Broken doco link for New Host->Kernel boot parameters Thanks. The Installation->Reinstall was something I missed but that doesn't seem to have helped. The host info still says that 'Device Passthrough' is Disabled. I'm sure I enabled everything I needed to in the BIOS but will have to double check. This is an old motherboard without IPMI though. Meh. On Thu, Apr 16, 2020 at 6:04 PM Strahil Nikolov <hunter86_bg@yahoo.com <mailto:hunter86_bg@yahoo.com> > wrote: On April 16, 2020 6:22:35 PM GMT+03:00, Shareef Jalloq <shareef@jalloq.co.uk <mailto:shareef@jalloq.co.uk> > wrote:
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in the documentation for the kernel boot parameter section of creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Settings...
Anyone know where this went or can help me with the options?
Shareef.
In order to change a kernel parameter - set the host into maintenance -> edit the host -> kernel -> put ticks where necessary or type your kernel parameter and save. Next use the 'Installation' dropdown and select reinstall. Once it's over - reboot the host from UI. At least this is the way I have enabled nested virtualization. Best Regards, Strahil Nikolov
participants (3)
-
eevans＠digitaldatatechs.com -
Shareef Jalloq -
Strahil Nikolov