3:27 a.m.
Hi All,
Anyone seen the attached error ? I'm suddenly unable to make a template
from a VM that has a pre-allocated disk. The VM is based on a different
template also still in the system, which I am also unable to remove.
The error in engine.log only says this:
2013-04-16 08:17:24,497 WARN
[org.ovirt.engine.core.bll.AddVmTemplateCommand] (ajp--0.0.0.0-8009-2)
[4021a4d2] CanDoAction of action AddVmTemplate failed.
Reasons:VAR__ACTION__ADD,VAR__TYPE__VM_TEMPLATE,ACTION_TYPE_FAILED_VM_HAS_NO_DISKS
There is nothing special coming up in the vdsm.log / to filter out debug
messages, i've changed log levels to INFO and higher earlier today - still,
when this error occurs, the only message I can see in vdsm.log are the
usual "can I write to the storage domain" ones ..
Thread-493::INFO::2013-04-16
08:17:42,873::logUtils::37::dispatcher::(wrapper) Run and protect:
getSpmStatus(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91', options=None)
Thread-493::INFO::2013-04-16
08:17:42,874::logUtils::39::dispatcher::(wrapper) Run and protect:
getSpmStatus, Return response: {'spm_st': {'spmId': 1,
'spmStatus': 'SPM',
'spmLver': 19}}
Thread-494::INFO::2013-04-16
08:17:42,886::logUtils::37::dispatcher::(wrapper) Run and protect:
getStoragePoolInfo(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91',
options=None)
Thread-494::INFO::2013-04-16
08:17:42,888::logUtils::39::dispatcher::(wrapper) Run and protect:
getStoragePoolInfo, Return response: {'info': {'spm_id': 1,
'master_uuid':
'7d0f78ff-aa25-4b64-a2ea-c8a65beda616', 'name': 'ALE-LAB',
'version': '2',
'domains':
u'35fd8ea5-8bbc-4343-881e-3f78626420e3:Active,55758a74-5c36-4364-bcb0-acae969acd64:Active,7d0f78ff-aa25-4b64-a2ea-c8a65beda616:Active,84e33e25-f4af-4b3c-9780-8a116a737236:Active,2c7fc39e-767c-4c97-946f-321468451c61:Active',
'pool_status': 'connected', 'isoprefix':
u'/rhev/data-center/353b073e-dfb0-46e6-8ac5-344ff251ca91/55758a74-5c36-4364-bcb0-acae969acd64/images/11111111-1111-1111-1111-111111111111',
'type': 'ISCSI', 'master_ver': 4, 'lver': 19},
'dominfo':
{u'35fd8ea5-8bbc-4343-881e-3f78626420e3': {'status': u'Active',
'diskfree':
'163208757248', 'alerts': [], 'disktotal':
'261858787328'},
u'55758a74-5c36-4364-bcb0-acae969acd64': {'status': u'Active',
'diskfree':
'318918098944', 'alerts': [], 'disktotal':
'802458435584'},
u'7d0f78ff-aa25-4b64-a2ea-c8a65beda616': {'status': u'Active',
'diskfree':
'23756537856', 'alerts': [], 'disktotal': '73014444032'},
u'84e33e25-f4af-4b3c-9780-8a116a737236': {'status': u'Active',
'diskfree':
'49153048576', 'alerts': [], 'disktotal':
'246076669952'},
u'2c7fc39e-767c-4c97-946f-321468451c61': {'status': u'Active',
'diskfree':
'26306674688', 'alerts': [], 'disktotal':
'104555610112'}}}
Any help please ?
FWIW, I am able to export the host to the export domain.
Alex
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
www.vsearchcloud.com |
5:03 a.m.
oh, the export of the VM failed too, when I checked this morning, it
apparently had no disk !?
what's going on here ? how can I clearly use a VM that has a disk, but the
system doesn't seem to know about it ?
Alex
On 16 April 2013 09:27, Alex Leonhardt <alex.tuxx(a)gmail.com> wrote:
Hi All,
Anyone seen the attached error ? I'm suddenly unable to make a template
from a VM that has a pre-allocated disk. The VM is based on a different
template also still in the system, which I am also unable to remove.
The error in engine.log only says this:
2013-04-16 08:17:24,497 WARN
[org.ovirt.engine.core.bll.AddVmTemplateCommand] (ajp--0.0.0.0-8009-2)
[4021a4d2] CanDoAction of action AddVmTemplate failed.
Reasons:VAR__ACTION__ADD,VAR__TYPE__VM_TEMPLATE,ACTION_TYPE_FAILED_VM_HAS_NO_DISKS
There is nothing special coming up in the vdsm.log / to filter out debug
messages, i've changed log levels to INFO and higher earlier today - still,
when this error occurs, the only message I can see in vdsm.log are the
usual "can I write to the storage domain" ones ..
Thread-493::INFO::2013-04-16
08:17:42,873::logUtils::37::dispatcher::(wrapper) Run and protect:
getSpmStatus(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91', options=None)
Thread-493::INFO::2013-04-16
08:17:42,874::logUtils::39::dispatcher::(wrapper) Run and protect:
getSpmStatus, Return response: {'spm_st': {'spmId': 1,
'spmStatus': 'SPM',
'spmLver': 19}}
Thread-494::INFO::2013-04-16
08:17:42,886::logUtils::37::dispatcher::(wrapper) Run and protect:
getStoragePoolInfo(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91',
options=None)
Thread-494::INFO::2013-04-16
08:17:42,888::logUtils::39::dispatcher::(wrapper) Run and protect:
getStoragePoolInfo, Return response: {'info': {'spm_id': 1,
'master_uuid':
'7d0f78ff-aa25-4b64-a2ea-c8a65beda616', 'name': 'ALE-LAB',
'version': '2',
'domains':
u'35fd8ea5-8bbc-4343-881e-3f78626420e3:Active,55758a74-5c36-4364-bcb0-acae969acd64:Active,7d0f78ff-aa25-4b64-a2ea-c8a65beda616:Active,84e33e25-f4af-4b3c-9780-8a116a737236:Active,2c7fc39e-767c-4c97-946f-321468451c61:Active',
'pool_status': 'connected', 'isoprefix':
u'/rhev/data-center/353b073e-dfb0-46e6-8ac5-344ff251ca91/55758a74-5c36-4364-bcb0-acae969acd64/images/11111111-1111-1111-1111-111111111111',
'type': 'ISCSI', 'master_ver': 4, 'lver': 19},
'dominfo':
{u'35fd8ea5-8bbc-4343-881e-3f78626420e3': {'status': u'Active',
'diskfree':
'163208757248', 'alerts': [], 'disktotal':
'261858787328'},
u'55758a74-5c36-4364-bcb0-acae969acd64': {'status': u'Active',
'diskfree':
'318918098944', 'alerts': [], 'disktotal':
'802458435584'},
u'7d0f78ff-aa25-4b64-a2ea-c8a65beda616': {'status': u'Active',
'diskfree':
'23756537856', 'alerts': [], 'disktotal':
'73014444032'},
u'84e33e25-f4af-4b3c-9780-8a116a737236': {'status': u'Active',
'diskfree':
'49153048576', 'alerts': [], 'disktotal':
'246076669952'},
u'2c7fc39e-767c-4c97-946f-321468451c61': {'status': u'Active',
'diskfree':
'26306674688', 'alerts': [], 'disktotal':
'104555610112'}}}
Any help please ?
FWIW, I am able to export the host to the export domain.
Alex
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
www.vsearchcloud.com |
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
www.vsearchcloud.com |
9:47 a.m.
So it seems to have something to do with the original Template, I still
cant explain what's going on though and the engine logs set to debug still
dont show anything more ...
anyone able to help please !?
On 16 April 2013 11:03, Alex Leonhardt <alex.tuxx(a)gmail.com> wrote:
oh, the export of the VM failed too, when I checked this morning, it
apparently had no disk !?
what's going on here ? how can I clearly use a VM that has a disk, but the
system doesn't seem to know about it ?
Alex
On 16 April 2013 09:27, Alex Leonhardt <alex.tuxx(a)gmail.com> wrote:
> Hi All,
>
> Anyone seen the attached error ? I'm suddenly unable to make a template
> from a VM that has a pre-allocated disk. The VM is based on a different
> template also still in the system, which I am also unable to remove.
>
> The error in engine.log only says this:
>
> 2013-04-16 08:17:24,497 WARN
> [org.ovirt.engine.core.bll.AddVmTemplateCommand] (ajp--0.0.0.0-8009-2)
> [4021a4d2] CanDoAction of action AddVmTemplate failed.
> Reasons:VAR__ACTION__ADD,VAR__TYPE__VM_TEMPLATE,ACTION_TYPE_FAILED_VM_HAS_NO_DISKS
>
> There is nothing special coming up in the vdsm.log / to filter out debug
> messages, i've changed log levels to INFO and higher earlier today - still,
> when this error occurs, the only message I can see in vdsm.log are the
> usual "can I write to the storage domain" ones ..
>
> Thread-493::INFO::2013-04-16
> 08:17:42,873::logUtils::37::dispatcher::(wrapper) Run and protect:
> getSpmStatus(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91', options=None)
> Thread-493::INFO::2013-04-16
> 08:17:42,874::logUtils::39::dispatcher::(wrapper) Run and protect:
> getSpmStatus, Return response: {'spm_st': {'spmId': 1,
'spmStatus': 'SPM',
> 'spmLver': 19}}
> Thread-494::INFO::2013-04-16
> 08:17:42,886::logUtils::37::dispatcher::(wrapper) Run and protect:
> getStoragePoolInfo(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91',
> options=None)
> Thread-494::INFO::2013-04-16
> 08:17:42,888::logUtils::39::dispatcher::(wrapper) Run and protect:
> getStoragePoolInfo, Return response: {'info': {'spm_id': 1,
'master_uuid':
> '7d0f78ff-aa25-4b64-a2ea-c8a65beda616', 'name': 'ALE-LAB',
'version': '2',
> 'domains':
>
u'35fd8ea5-8bbc-4343-881e-3f78626420e3:Active,55758a74-5c36-4364-bcb0-acae969acd64:Active,7d0f78ff-aa25-4b64-a2ea-c8a65beda616:Active,84e33e25-f4af-4b3c-9780-8a116a737236:Active,2c7fc39e-767c-4c97-946f-321468451c61:Active',
> 'pool_status': 'connected', 'isoprefix':
>
u'/rhev/data-center/353b073e-dfb0-46e6-8ac5-344ff251ca91/55758a74-5c36-4364-bcb0-acae969acd64/images/11111111-1111-1111-1111-111111111111',
> 'type': 'ISCSI', 'master_ver': 4, 'lver': 19},
'dominfo':
> {u'35fd8ea5-8bbc-4343-881e-3f78626420e3': {'status':
u'Active', 'diskfree':
> '163208757248', 'alerts': [], 'disktotal':
'261858787328'},
> u'55758a74-5c36-4364-bcb0-acae969acd64': {'status':
u'Active', 'diskfree':
> '318918098944', 'alerts': [], 'disktotal':
'802458435584'},
> u'7d0f78ff-aa25-4b64-a2ea-c8a65beda616': {'status':
u'Active', 'diskfree':
> '23756537856', 'alerts': [], 'disktotal':
'73014444032'},
> u'84e33e25-f4af-4b3c-9780-8a116a737236': {'status':
u'Active', 'diskfree':
> '49153048576', 'alerts': [], 'disktotal':
'246076669952'},
> u'2c7fc39e-767c-4c97-946f-321468451c61': {'status':
u'Active', 'diskfree':
> '26306674688', 'alerts': [], 'disktotal':
'104555610112'}}}
>
> Any help please ?
>
> FWIW, I am able to export the host to the export domain.
>
> Alex
>
> --
> | RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
> www.vsearchcloud.com |
>
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
www.vsearchcloud.com |
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
www.vsearchcloud.com |
1:39 p.m.
This is a multi-part message in MIME format.
--------------010700010704050904060308
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
not sure what it was, but eventually i was able to export the VM with
the disk, re-import it and make it a template - yay! :)
Alex
On 04/16/2013 03:47 PM, Alex Leonhardt wrote:
So it seems to have something to do with the original Template, I
still cant explain what's going on though and the engine logs set to
debug still dont show anything more ...
anyone able to help please !?
On 16 April 2013 11:03, Alex Leonhardt <alex.tuxx(a)gmail.com
<mailto:alex.tuxx@gmail.com>> wrote:
oh, the export of the VM failed too, when I checked this morning,
it apparently had no disk !?
what's going on here ? how can I clearly use a VM that has a disk,
but the system doesn't seem to know about it ?
Alex
On 16 April 2013 09:27, Alex Leonhardt <alex.tuxx(a)gmail.com
<mailto:alex.tuxx@gmail.com>> wrote:
Hi All,
Anyone seen the attached error ? I'm suddenly unable to make a
template from a VM that has a pre-allocated disk. The VM is
based on a different template also still in the system, which
I am also unable to remove.
The error in engine.log only says this:
2013-04-16 08:17:24,497 WARN
[org.ovirt.engine.core.bll.AddVmTemplateCommand]
(ajp--0.0.0.0-8009-2) [4021a4d2] CanDoAction of action
AddVmTemplate failed.
Reasons:VAR__ACTION__ADD,VAR__TYPE__VM_TEMPLATE,ACTION_TYPE_FAILED_VM_HAS_NO_DISKS
There is nothing special coming up in the vdsm.log / to filter
out debug messages, i've changed log levels to INFO and higher
earlier today - still, when this error occurs, the only
message I can see in vdsm.log are the usual "can I write to
the storage domain" ones ..
Thread-493::INFO::2013-04-16
08:17:42,873::logUtils::37::dispatcher::(wrapper) Run and
protect:
getSpmStatus(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91',
options=None)
Thread-493::INFO::2013-04-16
08:17:42,874::logUtils::39::dispatcher::(wrapper) Run and
protect: getSpmStatus, Return response: {'spm_st': {'spmId':
1, 'spmStatus': 'SPM', 'spmLver': 19}}
Thread-494::INFO::2013-04-16
08:17:42,886::logUtils::37::dispatcher::(wrapper) Run and
protect:
getStoragePoolInfo(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91',
options=None)
Thread-494::INFO::2013-04-16
08:17:42,888::logUtils::39::dispatcher::(wrapper) Run and
protect: getStoragePoolInfo, Return response: {'info':
{'spm_id': 1, 'master_uuid':
'7d0f78ff-aa25-4b64-a2ea-c8a65beda616', 'name':
'ALE-LAB',
'version': '2', 'domains':
u'35fd8ea5-8bbc-4343-881e-3f78626420e3:Active,55758a74-5c36-4364-bcb0-acae969acd64:Active,7d0f78ff-aa25-4b64-a2ea-c8a65beda616:Active,84e33e25-f4af-4b3c-9780-8a116a737236:Active,2c7fc39e-767c-4c97-946f-321468451c61:Active',
'pool_status': 'connected', 'isoprefix':
u'/rhev/data-center/353b073e-dfb0-46e6-8ac5-344ff251ca91/55758a74-5c36-4364-bcb0-acae969acd64/images/11111111-1111-1111-1111-111111111111',
'type': 'ISCSI', 'master_ver': 4, 'lver': 19},
'dominfo':
{u'35fd8ea5-8bbc-4343-881e-3f78626420e3': {'status':
u'Active', 'diskfree': '163208757248', 'alerts':
[],
'disktotal': '261858787328'},
u'55758a74-5c36-4364-bcb0-acae969acd64': {'status':
u'Active',
'diskfree': '318918098944', 'alerts': [],
'disktotal':
'802458435584'}, u'7d0f78ff-aa25-4b64-a2ea-c8a65beda616':
{'status': u'Active', 'diskfree': '23756537856',
'alerts': [],
'disktotal': '73014444032'},
u'84e33e25-f4af-4b3c-9780-8a116a737236': {'status':
u'Active',
'diskfree': '49153048576', 'alerts': [],
'disktotal':
'246076669952'}, u'2c7fc39e-767c-4c97-946f-321468451c61':
{'status': u'Active', 'diskfree': '26306674688',
'alerts': [],
'disktotal': '104555610112'}}}
Any help please ?
FWIW, I am able to export the host to the export domain.
Alex
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co
<http://www.vcore.co> | www.vsearchcloud.com
<http://www.vsearchcloud.com> |
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co
<http://www.vcore.co> | www.vsearchcloud.com
<http://www.vsearchcloud.com> |
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co
<http://www.vcore.co> | www.vsearchcloud.com
<http://www.vsearchcloud.com> |
--------------010700010704050904060308
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<font size="-1"><font face="Tahoma">not sure what it
was, but
eventually i was able to export the VM with the disk, re-import
it and make it a template</font></font> - yay! :) <br>
<br>
Alex<br>
<br>
On 04/16/2013 03:47 PM, Alex Leonhardt wrote:
<blockquote
cite="mid:CAH4_GUuz_FqSWN3taCw27pW8CggNFLb2nQQFgSrKQGaBpYceoA@mail.gmail.com"
type="cite">
<div dir="ltr">
<div class="gmail_default" style="font-size:small">So it
seems
to have something to do with the original Template, I still
cant explain what's going on though and the engine logs set to
debug still dont show anything more ... <br>
<br>
anyone able to help please !? <br>
</div>
</div>
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">On 16 April 2013 11:03, Alex Leonhardt
<span dir="ltr"><<a moz-do-not-send="true"
href="mailto:alex.tuxx@gmail.com"
target="_blank">alex.tuxx(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div class="gmail_default"
style="font-size:small">oh, the
export of the VM failed too, when I checked this
morning, it apparently had no disk !? <br>
<br>
</div>
<div class="gmail_default"
style="font-size:small">
what's going on here ? how can I clearly use a VM that
has a disk, but the system doesn't seem to know about it
? <br>
<span class="HOEnZb"><font
color="#888888"><br>
Alex<br>
<br>
</font></span></div>
</div>
<div class="HOEnZb">
<div class="h5">
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">On 16 April 2013 09:27, Alex
Leonhardt <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:alex.tuxx@gmail.com"
target="_blank">alex.tuxx(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div class="gmail_default"
style="font-size:small">Hi All,<br>
<br>
</div>
<div class="gmail_default"
style="font-size:small">
Anyone seen the attached error ? I'm suddenly
unable to make a template from a VM that has a
pre-allocated disk. The VM is based on a
different template also still in the system,
which I am also unable to remove.<br>
<br>
</div>
<div class="gmail_default"
style="font-size:small">The error in
engine.log only says this: <br>
<br>
2013-04-16 08:17:24,497 WARN
[org.ovirt.engine.core.bll.AddVmTemplateCommand]
(ajp--0.0.0.0-8009-2) [4021a4d2] CanDoAction
of action AddVmTemplate failed.
Reasons:VAR__ACTION__ADD,VAR__TYPE__VM_TEMPLATE,ACTION_TYPE_FAILED_VM_HAS_NO_DISKS<br>
<br>
</div>
<div class="gmail_default"
style="font-size:small">There is nothing
special coming up in the vdsm.log / to filter
out debug messages, i've changed log levels to
INFO and higher earlier today - still, when
this error occurs, the only message I can see
in vdsm.log are the usual "can I write to the
storage domain" ones .. <br>
<br>
Thread-493::INFO::2013-04-16
08:17:42,873::logUtils::37::dispatcher::(wrapper)
Run and protect:
getSpmStatus(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91',
options=None)<br>
Thread-493::INFO::2013-04-16
08:17:42,874::logUtils::39::dispatcher::(wrapper)
Run and protect: getSpmStatus, Return
response: {'spm_st': {'spmId': 1,
'spmStatus':
'SPM', 'spmLver': 19}}<br>
Thread-494::INFO::2013-04-16
08:17:42,886::logUtils::37::dispatcher::(wrapper)
Run and protect:
getStoragePoolInfo(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91',
options=None)<br>
Thread-494::INFO::2013-04-16
08:17:42,888::logUtils::39::dispatcher::(wrapper)
Run and protect: getStoragePoolInfo, Return
response: {'info': {'spm_id': 1,
'master_uuid':
'7d0f78ff-aa25-4b64-a2ea-c8a65beda616',
'name': 'ALE-LAB', 'version':
'2', 'domains':
u'35fd8ea5-8bbc-4343-881e-3f78626420e3:Active,55758a74-5c36-4364-bcb0-acae969acd64:Active,7d0f78ff-aa25-4b64-a2ea-c8a65beda616:Active,84e33e25-f4af-4b3c-9780-8a116a737236:Active,2c7fc39e-767c-4c97-946f-321468451c61:Active',
'pool_status': 'connected',
'isoprefix':
u'/rhev/data-center/353b073e-dfb0-46e6-8ac5-344ff251ca91/55758a74-5c36-4364-bcb0-acae969acd64/images/11111111-1111-1111-1111-111111111111',
'type': 'ISCSI', 'master_ver': 4,
'lver': 19},
'dominfo':
{u'35fd8ea5-8bbc-4343-881e-3f78626420e3':
{'status': u'Active', 'diskfree':
'163208757248', 'alerts': [],
'disktotal':
'261858787328'},
u'55758a74-5c36-4364-bcb0-acae969acd64':
{'status': u'Active', 'diskfree':
'318918098944', 'alerts': [],
'disktotal':
'802458435584'},
u'7d0f78ff-aa25-4b64-a2ea-c8a65beda616':
{'status': u'Active', 'diskfree':
'23756537856', 'alerts': [],
'disktotal':
'73014444032'},
u'84e33e25-f4af-4b3c-9780-8a116a737236':
{'status': u'Active', 'diskfree':
'49153048576', 'alerts': [],
'disktotal':
'246076669952'},
u'2c7fc39e-767c-4c97-946f-321468451c61':
{'status': u'Active', 'diskfree':
'26306674688', 'alerts': [],
'disktotal':
'104555610112'}}}<br>
<br>
</div>
<div class="gmail_default"
style="font-size:small">Any help please ?
<br>
<br>
</div>
<div class="gmail_default"
style="font-size:small">FWIW, I am able to
export the host to the export domain. <br>
<span><font color="#888888"><br>
Alex<br>
</font></span></div>
<span><font color="#888888">
<br>
-- <br>
<div dir="ltr">| RHCE | Sen Sys Engineer /
Platform Architect | <a
moz-do-not-send="true"
href="http://www.vcore.co"
target="_blank">www.vcore.co</a> |
<a
moz-do-not-send="true"
href="http://www.vsearchcloud.com"
target="_blank">www.vsearchcloud.com</a>
| <br>
</div>
</font></span></div>
</blockquote>
</div>
<br>
<br clear="all">
<br>
-- <br>
<div dir="ltr">| RHCE | Sen Sys Engineer / Platform
Architect | <a moz-do-not-send="true"
href="http://www.vcore.co"
target="_blank">www.vcore.co</a>
| <a moz-do-not-send="true"
href="http://www.vsearchcloud.com"
target="_blank">www.vsearchcloud.com</a>
| <br>
</div>
</div>
</div>
</div>
</blockquote>
</div>
<br>
<br clear="all">
<br>
-- <br>
<div dir="ltr">| RHCE | Sen Sys Engineer / Platform Architect |
<a moz-do-not-send="true" href="http://www.vcore.co"
target="_blank">www.vcore.co</a> | <a
moz-do-not-send="true" href="http://www.vsearchcloud.com"
target="_blank">www.vsearchcloud.com</a> | <br>
</div>
</div>
</blockquote>
</body>
</html>
--------------010700010704050904060308--
2:10 a.m.
Hi Alex,
Please check that the VM has at least one disk that:
- is disk (not lun)
- it is not shareable
- snapshot enabled
Thx,
Laszlo
----- Original Message -----
From: "Alex Leonhardt" <alex.tuxx(a)gmail.com>
To: "oVirt Mailing List" <users(a)ovirt.org>
Sent: Tuesday, April 16, 2013 10:27:03 AM
Subject: [Users] unable to make a template from VM
Hi All,
Anyone seen the attached error ? I'm suddenly unable to make a template from
a VM that has a pre-allocated disk. The VM is based on a different template
also still in the system, which I am also unable to remove.
The error in engine.log only says this:
2013-04-16 08:17:24,497 WARN [org.ovirt.engine.core.bll.AddVmTemplateCommand]
(ajp--0.0.0.0-8009-2) [4021a4d2] CanDoAction of action AddVmTemplate failed.
Reasons:VAR__ACTION__ADD,VAR__TYPE__VM_TEMPLATE,ACTION_TYPE_FAILED_VM_HAS_NO_DISKS
There is nothing special coming up in the vdsm.log / to filter out debug
messages, i've changed log levels to INFO and higher earlier today - still,
when this error occurs, the only message I can see in vdsm.log are the usual
"can I write to the storage domain" ones ..
Thread-493::INFO::2013-04-16
08:17:42,873::logUtils::37::dispatcher::(wrapper) Run and protect:
getSpmStatus(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91', options=None)
Thread-493::INFO::2013-04-16
08:17:42,874::logUtils::39::dispatcher::(wrapper) Run and protect:
getSpmStatus, Return response: {'spm_st': {'spmId': 1,
'spmStatus': 'SPM',
'spmLver': 19}}
Thread-494::INFO::2013-04-16
08:17:42,886::logUtils::37::dispatcher::(wrapper) Run and protect:
getStoragePoolInfo(spUUID='353b073e-dfb0-46e6-8ac5-344ff251ca91',
options=None)
Thread-494::INFO::2013-04-16
08:17:42,888::logUtils::39::dispatcher::(wrapper) Run and protect:
getStoragePoolInfo, Return response: {'info': {'spm_id': 1,
'master_uuid':
'7d0f78ff-aa25-4b64-a2ea-c8a65beda616', 'name': 'ALE-LAB',
'version': '2',
'domains':
u'35fd8ea5-8bbc-4343-881e-3f78626420e3:Active,55758a74-5c36-4364-bcb0-acae969acd64:Active,7d0f78ff-aa25-4b64-a2ea-c8a65beda616:Active,84e33e25-f4af-4b3c-9780-8a116a737236:Active,2c7fc39e-767c-4c97-946f-321468451c61:Active',
'pool_status': 'connected', 'isoprefix':
u'/rhev/data-center/353b073e-dfb0-46e6-8ac5-344ff251ca91/55758a74-5c36-4364-bcb0-acae969acd64/images/11111111-1111-1111-1111-111111111111',
'type': 'ISCSI', 'master_ver': 4, 'lver': 19},
'dominfo':
{u'35fd8ea5-8bbc-4343-881e-3f78626420e3': {'status': u'Active',
'diskfree':
'163208757248', 'alerts': [], 'disktotal':
'261858787328'},
u'55758a74-5c36-4364-bcb0-acae969acd64': {'status': u'Active',
'diskfree':
'318918098944', 'alerts': [], 'disktotal':
'802458435584'},
u'7d0f78ff-aa25-4b64-a2ea-c8a65beda616': {'status': u'Active',
'diskfree':
'23756537856', 'alerts': [], 'disktotal':
'73014444032'},
u'84e33e25-f4af-4b3c-9780-8a116a737236': {'status': u'Active',
'diskfree':
'49153048576', 'alerts': [], 'disktotal':
'246076669952'},
u'2c7fc39e-767c-4c97-946f-321468451c61': {'status': u'Active',
'diskfree':
'26306674688', 'alerts': [], 'disktotal':
'104555610112'}}}
Any help please ?
FWIW, I am able to export the host to the export domain.
Alex
--
| RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
| www.vsearchcloud.com |
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4238
days inactive
4240
days old
4 comments
2 participants
participants (2)
-
Alex Leonhardt -
Laszlo Hornyak