11:50 a.m.
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation with an
view to implement complete open source virtualization solution instead of
using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt node
(Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2
(20120510.0.el6_2)
Post installation engine started fine but while trying to add host its
giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster
Default which is set to version 3.1.
I don't know what exact details I would need to share for troubleshooting.
Hence I have attached a file with details of rpms installed on ovirt-engine
and node. ( One may not like to scroll the entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance,
Keyur
2:55 p.m.
On 11/09/2012 11:50 AM, Keyur Makwana wrote:
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation with
an view to implement complete open source virtualization solution
instead of using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt node
(Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2
(20120510.0.el6_2)
Post installation engine started fine but while trying to add host its
giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster
Default which is set to version 3.1.
you are using a RHEV-H host with an ovirt node.
1. this is not intended to be a supported combination. ovirt and rhev
compatibility versions (while similar in naming) are different.
2. the RHEV-H you are using supports 3.0 only, you need to change the
cluster level to 3.0 (but again, this is not a supported combination and
behavior will be unexpected).
3. i recommend you try to use an ovirt based host (fedora or .el6 one).
I don't know what exact details I would need to share for
troubleshooting. Hence I have attached a file with details of rpms
installed on ovirt-engine and node. ( One may not like to scroll the
entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance,
Keyur
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:06 p.m.
------=_Part_29688851_689950810.1352469990533
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
For troubleshooting -
Can you run on your host machine
vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)
and send us the results?
----- Original Message -----
From: "Keyur Makwana" <kurmakwana(a)gmail.com>
To: users(a)ovirt.org
Sent: Friday, November 9, 2012 12:50:22 PM
Subject: [Users] Ovirt Host (3.0) compatability issue with Cluster
(3.1)
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation
with an view to implement complete open source virtualization
solution instead of using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt
node (Hypervisor) - Red Hat Enterprise Virtualization Hypervisor
release 6.2 (20120510.0.el6_2)
Post installation engine started fine but while trying to add host
its giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster
Default which is set to version 3.1.
I don't know what exact details I would need to share for
troubleshooting. Hence I have attached a file with details of rpms
installed on ovirt-engine and node. ( One may not like to scroll the
entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance,
Keyur
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
------=_Part_29688851_689950810.1352469990533
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><style type=3D'text/css'>p { margin: 0;
}</style></head><body><=
div style=3D'font-family: times new roman,new york,times,serif; font-size: =
12pt; color: #000000'>For troubleshooting -<br>Can you run on your host mac=
hine<br><br>vdsClient 0 getVdsCaps (might be vdsClient -s 0
getVdsCaps)<br>=
<br>and send us the results?<br><br><br><hr
id=3D"zwchr"><blockquote style=
=3D"border-left:2px solid rgb(16, 16, 255);margin-left:5px;padding-left:5px=
;color:#000;font-weight:normal;font-style:normal;text-decoration:none;font-=
family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From:
</b>"Keyur Makw=
ana" &lt;kurmakwana(a)gmail.com&gt;<br><b>To:
</b>users@ovirt.org<br><b>Sent:=
</b>Friday, November 9, 2012 12:50:22 PM<br><b>Subject:
</b>[Users] Ovirt =
Host (3.0) compatability issue with Cluster (3.1)<br><br>Hello
All,<div><br=
</div><div>I am new to Ovirt and trying to Implement Ovirt
in my organisat=
ion with an view to implement complete open source virtualization
solution =
instead of using VMware or other Paid once.</div><div>
<br></div><div>I have installed ovirt-engine on Fedora 17 and have
installe=
d Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization Hypervis=
or release 6.2
(20120510.0.el6_2)</div><div><br></div><div><br></div><div>P=
ost installation engine started fine but while trying to add host its givin=
g me error as below.</div>
<div><br></div><div>Host host1 is compatible with versions (3.0)
and cannot=
join Cluster Default which is set to version
3.1.<br></div><div><br></div>=
<div>I don't know what exact details I would need to share for troubleshoot=
ing. Hence I have attached a file with details of rpms installed on ovirt-e=
ngine and node. ( One may not like to scroll the entire file)<br>
</div><div><br></div><div>I might be missing something very
silly or I may =
sound too
stupid. <br></div><div><br></div><div>Ovirt
masters : Please=
guide.<br></div><div><br></div><div>Thanks in
advance,</div><div>Keyur</di=
v>
<div><br></div>
<br>_______________________________________________<br>Users mailing
list<b=
r>Users@ovirt.org<br>http://lists.ovirt.org/mailman/listinfo/users<br></blo=
ckquote><br></div></body></html>
------=_Part_29688851_689950810.1352469990533--
3:33 p.m.
Hello,
Thanks for having a look at this issue.
On ovirt-engine - either of the command did not work.
Here is the output from the hypervisor.
[root@h1 ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:5e25411e9039'}], 'FC': [{'wwpn':
'10000000c9cb2826', 'wwnn': '20000000c9cb2826', 'model':
'LPe1205-CIOv -
Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn':
'10000000c9cb2827', 'wwnn': '20000000c9cb2827', 'model':
'LPe1205-CIOv -
Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}]}
ISCSIInitiatorName = iqn.1994-05.com.redhat:5e25411e9039
bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00',
'cfg': {}, 'netmask':
'', 'addr': '', 'slaves': []}, 'bond0':
{'hwaddr': '00:00:00:00:00:00',
'cfg': {}, 'netmask': '', 'addr': '',
'slaves': []}, 'bond1': {'hwaddr':
'00:00:00:00:00:00', 'cfg': {}, 'netmask': '',
'addr': '', 'slaves': []},
'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {},
'netmask': '', 'addr':
'', 'slaves': []}, 'bond3': {'hwaddr':
'00:00:00:00:00:00', 'cfg': {},
'netmask': '', 'addr': '', 'slaves': []}}
clusterLevels = ['3.0']
cpuCores = 12
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,arat,epb,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1
cpuModel = Intel(R) Xeon(R) CPU E5645 @ 2.40GHz
cpuSockets = 2
cpuSpeed = 2400.276
emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0',
'rhel6.0.0',
'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0']
guestOverhead = 65
hooks = {'before_vm_start': {'50_vhostmd': {'md5':
'1635e45584995d9ad2629939cb0bcdbf'}}, 'after_vm_destroy':
{'50_vhostmd':
{'md5': '7e7509430304099f38e4a9de966af090'}},
'before_vm_dehibernate':
{'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}},
'before_vm_migrate_destination': {'50_vhostmd': {'md5':
'1635e45584995d9ad2629939cb0bcdbf'}}}
kvmEnabled = true
lastClient = 172.29.5.200
lastClientIface = rhevm
management_ip = 172.29.81.141
memSize = 64420
networks = {'rhevm': {'addr': '172.29.81.141', 'cfg':
{'IPV6FORWARDING':
'no', 'IPV6INIT': 'no', 'SKIPLIBVIRT': 'True',
'IPADDR': '172.29.81.141',
'ONBOOT': 'yes', 'DELAY': '0', 'DEVICE':
'rhevm', 'NETMASK':
'255.255.255.0', 'BOOTPROTO': 'static', 'IPV6_AUTOCONF':
'no', 'PEERNTP':
'yes', 'TYPE': 'Bridge', 'GATEWAY':
'172.29.81.1'}, 'ports': ['eth8'],
'netmask': '255.255.255.0', 'stp': 'off',
'gateway': '172.29.81.1'}}
nics = {'eth9': {'hwaddr': '5C:F3:FC:98:19:82',
'netmask': '', 'speed': 0,
'addr': ''}, 'eth8': {'hwaddr':
'5C:F3:FC:98:19:80', 'netmask': '',
'speed': 1000, 'addr': ''}, 'eth7': {'hwaddr':
'00:00:C9:D2:16:73',
'netmask': '', 'speed': 0, 'addr': ''},
'eth6': {'hwaddr':
'00:00:C9:D2:16:6F', 'netmask': '', 'speed': 0,
'addr': ''}, 'eth5':
{'hwaddr': '00:00:C9:D2:16:72', 'netmask': '',
'speed': 0, 'addr': ''},
'eth4': {'hwaddr': '00:00:C9:D2:16:6E', 'netmask':
'', 'speed': 0, 'addr':
''}, 'eth3': {'hwaddr': '00:00:C9:D2:16:71',
'netmask': '', 'speed': 0,
'addr': ''}, 'eth2': {'hwaddr':
'00:00:C9:D2:16:6D', 'netmask': '',
'speed': 0, 'addr': ''}, 'eth1': {'hwaddr':
'00:00:C9:D2:16:70', 'netmask':
'', 'speed': 0, 'addr': ''}, 'eth0':
{'hwaddr': '00:00:C9:D2:16:6C',
'netmask': '', 'speed': 0, 'addr': ''}}
operatingSystem = {'release': '20120510.0.el6_2', 'version':
'6.2',
'name': 'RHEV Hypervisor'}
packages2 = {'kernel': {'release': '220.17.1.el6.x86_64',
'buildtime':
1335447433.0, 'version': '2.6.32'}, 'spice-server':
{'release': '5.el6',
'buildtime': '1319663438', 'version': '0.8.2'},
'vdsm': {'release':
'112.12.el6_2', 'buildtime': '1334495504', 'version':
'4.9'}, 'qemu-kvm':
{'release': '2.209.el6_2.5', 'buildtime': '1334776518',
'version':
'0.12.1.2'}, 'libvirt': {'release': '23.el6_2.8',
'buildtime':
'1333958926', 'version': '0.9.4'}, 'qemu-img':
{'release': '2.209.el6_2.5',
'buildtime': '1334776518', 'version': '0.12.1.2'}}
reservedMem = 256
software_revision = 112.12
software_version = 4.9
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0']
uuid = C12E325E-3D69-11E1-91C1-5CF3FC981980_00:00:C9:D2:16:6C
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']
[root@h1 ~]#
Regards,
Keyur
On Fri, Nov 9, 2012 at 7:36 PM, Yair Zaslavsky <yzaslavs(a)redhat.com> wrote:
For troubleshooting -
Can you run on your host machine
vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)
and send us the results?
------------------------------
*From: *"Keyur Makwana" <kurmakwana(a)gmail.com>
*To: *users(a)ovirt.org
*Sent: *Friday, November 9, 2012 12:50:22 PM
*Subject: *[Users] Ovirt Host (3.0) compatability issue with Cluster (3.1)
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation with an
view to implement complete open source virtualization solution instead of
using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt node
(Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2
(20120510.0.el6_2)
Post installation engine started fine but while trying to add host its
giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster
Default which is set to version 3.1.
I don't know what exact details I would need to share for troubleshooting.
Hence I have attached a file with details of rpms installed on ovirt-engine
and node. ( One may not like to scroll the entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance,
Keyur
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4:19 p.m.
On 11/09/2012 03:33 PM, Keyur Makwana wrote:
Hello,
Thanks for having a look at this issue.
the cluster level supported by this node is 3.0.
you should change your cluster level to 3.0 to use it (your DC should
also be 3.0. you may need to create a new DC, since you can't lower a DC
level if it has clusters in it iirc).
but you are using in incompatible engine (ovirt) and node (rhev).
they have different compatibility levels even if the numbers are the same.
On ovirt-engine - either of the command did not work.
Here is the output from the hypervisor.
[root@h1 ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:5e25411e9039'}], 'FC': [{'wwpn':
'10000000c9cb2826', 'wwnn': '20000000c9cb2826', 'model':
'LPe1205-CIOv -
Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn':
'10000000c9cb2827', 'wwnn': '20000000c9cb2827', 'model':
'LPe1205-CIOv -
Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}]}
ISCSIInitiatorName = iqn.1994-05.com.redhat:5e25411e9039
bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00',
'cfg': {},
'netmask': '', 'addr': '', 'slaves': []},
'bond0': {'hwaddr':
'00:00:00:00:00:00', 'cfg': {}, 'netmask': '',
'addr': '', 'slaves':
[]}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {},
'netmask': '',
'addr': '', 'slaves': []}, 'bond2': {'hwaddr':
'00:00:00:00:00:00',
'cfg': {}, 'netmask': '', 'addr': '',
'slaves': []}, 'bond3': {'hwaddr':
'00:00:00:00:00:00', 'cfg': {}, 'netmask': '',
'addr': '', 'slaves': []}}
clusterLevels = ['3.0']
cpuCores = 12
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,arat,epb,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1
cpuModel = Intel(R) Xeon(R) CPU E5645 @ 2.40GHz
cpuSockets = 2
cpuSpeed = 2400.276
emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0',
'rhel6.0.0',
'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0']
guestOverhead = 65
hooks = {'before_vm_start': {'50_vhostmd': {'md5':
'1635e45584995d9ad2629939cb0bcdbf'}}, 'after_vm_destroy':
{'50_vhostmd':
{'md5': '7e7509430304099f38e4a9de966af090'}},
'before_vm_dehibernate':
{'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}},
'before_vm_migrate_destination': {'50_vhostmd': {'md5':
'1635e45584995d9ad2629939cb0bcdbf'}}}
kvmEnabled = true
lastClient = 172.29.5.200
lastClientIface = rhevm
management_ip = 172.29.81.141
memSize = 64420
networks = {'rhevm': {'addr': '172.29.81.141', 'cfg':
{'IPV6FORWARDING':
'no', 'IPV6INIT': 'no', 'SKIPLIBVIRT': 'True',
'IPADDR':
'172.29.81.141', 'ONBOOT': 'yes', 'DELAY': '0',
'DEVICE': 'rhevm',
'NETMASK': '255.255.255.0', 'BOOTPROTO': 'static',
'IPV6_AUTOCONF':
'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge',
'GATEWAY': '172.29.81.1'},
'ports': ['eth8'], 'netmask': '255.255.255.0',
'stp': 'off', 'gateway':
'172.29.81.1'}}
nics = {'eth9': {'hwaddr': '5C:F3:FC:98:19:82',
'netmask': '', 'speed':
0, 'addr': ''}, 'eth8': {'hwaddr':
'5C:F3:FC:98:19:80', 'netmask': '',
'speed': 1000, 'addr': ''}, 'eth7': {'hwaddr':
'00:00:C9:D2:16:73',
'netmask': '', 'speed': 0, 'addr': ''},
'eth6': {'hwaddr':
'00:00:C9:D2:16:6F', 'netmask': '', 'speed': 0,
'addr': ''}, 'eth5':
{'hwaddr': '00:00:C9:D2:16:72', 'netmask': '',
'speed': 0, 'addr': ''},
'eth4': {'hwaddr': '00:00:C9:D2:16:6E', 'netmask':
'', 'speed': 0,
'addr': ''}, 'eth3': {'hwaddr':
'00:00:C9:D2:16:71', 'netmask': '',
'speed': 0, 'addr': ''}, 'eth2': {'hwaddr':
'00:00:C9:D2:16:6D',
'netmask': '', 'speed': 0, 'addr': ''},
'eth1': {'hwaddr':
'00:00:C9:D2:16:70', 'netmask': '', 'speed': 0,
'addr': ''}, 'eth0':
{'hwaddr': '00:00:C9:D2:16:6C', 'netmask': '',
'speed': 0, 'addr': ''}}
operatingSystem = {'release': '20120510.0.el6_2', 'version':
'6.2',
'name': 'RHEV Hypervisor'}
packages2 = {'kernel': {'release': '220.17.1.el6.x86_64',
'buildtime':
1335447433.0, 'version': '2.6.32'}, 'spice-server':
{'release': '5.el6',
'buildtime': '1319663438', 'version': '0.8.2'},
'vdsm': {'release':
'112.12.el6_2', 'buildtime': '1334495504', 'version':
'4.9'},
'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime':
'1334776518',
'version': '0.12.1.2'}, 'libvirt': {'release':
'23.el6_2.8',
'buildtime': '1333958926', 'version': '0.9.4'},
'qemu-img': {'release':
'2.209.el6_2.5', 'buildtime': '1334776518', 'version':
'0.12.1.2'}}
reservedMem = 256
software_revision = 112.12
software_version = 4.9
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0']
uuid = C12E325E-3D69-11E1-91C1-5CF3FC981980_00:00:C9:D2:16:6C
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']
[root@h1 ~]#
Regards,
Keyur
On Fri, Nov 9, 2012 at 7:36 PM, Yair Zaslavsky <yzaslavs(a)redhat.com
<mailto:yzaslavs@redhat.com>> wrote:
For troubleshooting -
Can you run on your host machine
vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)
and send us the results?
------------------------------------------------------------------------
*From: *"Keyur Makwana" <kurmakwana(a)gmail.com
<mailto:kurmakwana@gmail.com>>
*To: *users(a)ovirt.org <mailto:users@ovirt.org>
*Sent: *Friday, November 9, 2012 12:50:22 PM
*Subject: *[Users] Ovirt Host (3.0) compatability issue with
Cluster (3.1)
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my
organisation with an view to implement complete open source
virtualization solution instead of using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed
Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization
Hypervisor release 6.2 (20120510.0.el6_2)
Post installation engine started fine but while trying to add
host its giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join
Cluster Default which is set to version 3.1.
I don't know what exact details I would need to share for
troubleshooting. Hence I have attached a file with details of
rpms installed on ovirt-engine and node. ( One may not like to
scroll the entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance,
Keyur
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4:31 p.m.
Hello,
Thanks for the update mates.
Silly me! I loaded wrong ISO apparently. I shall update once am through the
next installation.
Thanks again!
Regards,
Keyur
On Fri, Nov 9, 2012 at 8:49 PM, Itamar Heim <iheim(a)redhat.com> wrote:
On 11/09/2012 03:33 PM, Keyur Makwana wrote:
> Hello,
>
> Thanks for having a look at this issue.
>
the cluster level supported by this node is 3.0.
you should change your cluster level to 3.0 to use it (your DC should also
be 3.0. you may need to create a new DC, since you can't lower a DC level
if it has clusters in it iirc).
but you are using in incompatible engine (ovirt) and node (rhev).
they have different compatibility levels even if the numbers are the same.
> On ovirt-engine - either of the command did not work.
>
> Here is the output from the hypervisor.
>
> [root@h1 ~]# vdsClient -s 0 getVdsCaps
> HBAInventory = {'iSCSI': [{'InitiatorName':
> 'iqn.1994-05.com.redhat:**5e25411e9039'}], 'FC': [{'wwpn':
> '10000000c9cb2826', 'wwnn': '20000000c9cb2826',
'model': 'LPe1205-CIOv -
> Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn':
> '10000000c9cb2827', 'wwnn': '20000000c9cb2827',
'model': 'LPe1205-CIOv -
> Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}]}
> ISCSIInitiatorName = iqn.1994-05.com.redhat:**5e25411e9039
> bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00',
'cfg': {},
> 'netmask': '', 'addr': '', 'slaves': []},
'bond0': {'hwaddr':
> '00:00:00:00:00:00', 'cfg': {}, 'netmask': '',
'addr': '', 'slaves':
> []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg':
{}, 'netmask': '',
> 'addr': '', 'slaves': []}, 'bond2':
{'hwaddr': '00:00:00:00:00:00',
> 'cfg': {}, 'netmask': '', 'addr': '',
'slaves': []}, 'bond3': {'hwaddr':
> '00:00:00:00:00:00', 'cfg': {}, 'netmask': '',
'addr': '', 'slaves': []}}
> clusterLevels = ['3.0']
> cpuCores = 12
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,**mce,cx8,apic,mtrr,pge,mca,**
> cmov,pat,pse36,clflush,dts,**acpi,mmx,fxsr,sse,sse2,ss,ht,**
> tm,pbe,syscall,nx,pdpe1gb,**rdtscp,lm,constant_tsc,arch_**
> perfmon,pebs,bts,rep_good,**xtopology,nonstop_tsc,**
> aperfmperf,pni,pclmulqdq,**dtes64,monitor,ds_cpl,vmx,smx,**
> est,tm2,ssse3,cx16,xtpr,pdcm,**dca,sse4_1,sse4_2,popcnt,aes,**
> lahf_lm,arat,epb,dts,tpr_**shadow,vnmi,flexpriority,ept,**
> vpid,model_486,model_pentium,**model_pentium2,model_pentium3,**
> model_pentiumpro,model_qemu32,**model_coreduo,model_core2duo,**
> model_n270,model_Conroe,model_**Penryn,model_Nehalem,model_**
> Westmere,model_Opteron_G1
> cpuModel = Intel(R) Xeon(R) CPU E5645 @ 2.40GHz
> cpuSockets = 2
> cpuSpeed = 2400.276
> emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0',
'rhel6.0.0',
> 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0']
> guestOverhead = 65
> hooks = {'before_vm_start': {'50_vhostmd': {'md5':
> '**1635e45584995d9ad2629939cb0bcd**bf'}}, 'after_vm_destroy':
> {'50_vhostmd':
> {'md5': '**7e7509430304099f38e4a9de966af0**90'}},
> 'before_vm_dehibernate':
> {'50_vhostmd': {'md5':
'**1635e45584995d9ad2629939cb0bcd**bf'}},
> 'before_vm_migrate_**destination': {'50_vhostmd': {'md5':
> '**1635e45584995d9ad2629939cb0bcd**bf'}}}
> kvmEnabled = true
> lastClient = 172.29.5.200
> lastClientIface = rhevm
> management_ip = 172.29.81.141
> memSize = 64420
> networks = {'rhevm': {'addr': '172.29.81.141', 'cfg':
{'IPV6FORWARDING':
> 'no', 'IPV6INIT': 'no', 'SKIPLIBVIRT':
'True', 'IPADDR':
> '172.29.81.141', 'ONBOOT': 'yes', 'DELAY':
'0', 'DEVICE': 'rhevm',
> 'NETMASK': '255.255.255.0', 'BOOTPROTO': 'static',
'IPV6_AUTOCONF':
> 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge',
'GATEWAY': '172.29.81.1'},
> 'ports': ['eth8'], 'netmask': '255.255.255.0',
'stp': 'off', 'gateway':
> '172.29.81.1'}}
> nics = {'eth9': {'hwaddr': '5C:F3:FC:98:19:82',
'netmask': '', 'speed':
> 0, 'addr': ''}, 'eth8': {'hwaddr':
'5C:F3:FC:98:19:80', 'netmask': '',
> 'speed': 1000, 'addr': ''}, 'eth7':
{'hwaddr': '00:00:C9:D2:16:73',
> 'netmask': '', 'speed': 0, 'addr': ''},
'eth6': {'hwaddr':
> '00:00:C9:D2:16:6F', 'netmask': '', 'speed': 0,
'addr': ''}, 'eth5':
> {'hwaddr': '00:00:C9:D2:16:72', 'netmask': '',
'speed': 0, 'addr': ''},
> 'eth4': {'hwaddr': '00:00:C9:D2:16:6E', 'netmask':
'', 'speed': 0,
> 'addr': ''}, 'eth3': {'hwaddr':
'00:00:C9:D2:16:71', 'netmask': '',
> 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr':
'00:00:C9:D2:16:6D',
> 'netmask': '', 'speed': 0, 'addr': ''},
'eth1': {'hwaddr':
> '00:00:C9:D2:16:70', 'netmask': '', 'speed': 0,
'addr': ''}, 'eth0':
> {'hwaddr': '00:00:C9:D2:16:6C', 'netmask': '',
'speed': 0, 'addr': ''}}
> operatingSystem = {'release': '20120510.0.el6_2', 'version':
'6.2',
> 'name': 'RHEV Hypervisor'}
> packages2 = {'kernel': {'release': '220.17.1.el6.x86_64',
'buildtime':
> 1335447433.0, 'version': '2.6.32'}, 'spice-server':
{'release': '5.el6',
> 'buildtime': '1319663438', 'version': '0.8.2'},
'vdsm': {'release':
> '112.12.el6_2', 'buildtime': '1334495504', 'version':
'4.9'},
> 'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime':
'1334776518',
> 'version': '0.12.1.2'}, 'libvirt': {'release':
'23.el6_2.8',
> 'buildtime': '1333958926', 'version': '0.9.4'},
'qemu-img': {'release':
> '2.209.el6_2.5', 'buildtime': '1334776518',
'version': '0.12.1.2'}}
> reservedMem = 256
> software_revision = 112.12
> software_version = 4.9
> supportedProtocols = ['2.2', '2.3']
> supportedRHEVMs = ['3.0']
> uuid = C12E325E-3D69-11E1-91C1-**5CF3FC981980_00:00:C9:D2:16:6C
> version_name = Snow Man
> vlans = {}
> vmTypes = ['kvm']
> [root@h1 ~]#
>
> Regards,
> Keyur
>
>
>
> On Fri, Nov 9, 2012 at 7:36 PM, Yair Zaslavsky <yzaslavs(a)redhat.com
> <mailto:yzaslavs@redhat.com>> wrote:
>
> For troubleshooting -
> Can you run on your host machine
>
> vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)
>
> and send us the results?
>
>
> ------------------------------**------------------------------**
> ------------
>
> *From: *"Keyur Makwana" <kurmakwana(a)gmail.com
> <mailto:kurmakwana@gmail.com>>
> *To: *users(a)ovirt.org <mailto:users@ovirt.org>
> *Sent: *Friday, November 9, 2012 12:50:22 PM
> *Subject: *[Users] Ovirt Host (3.0) compatability issue with
>
> Cluster (3.1)
>
>
> Hello All,
>
> I am new to Ovirt and trying to Implement Ovirt in my
> organisation with an view to implement complete open source
> virtualization solution instead of using VMware or other Paid
> once.
>
> I have installed ovirt-engine on Fedora 17 and have installed
> Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization
> Hypervisor release 6.2 (20120510.0.el6_2)
>
>
> Post installation engine started fine but while trying to add
> host its giving me error as below.
>
> Host host1 is compatible with versions (3.0) and cannot join
> Cluster Default which is set to version 3.1.
>
> I don't know what exact details I would need to share for
> troubleshooting. Hence I have attached a file with details of
> rpms installed on ovirt-engine and node. ( One may not like to
> scroll the entire file)
>
> I might be missing something very silly or I may sound too stupid.
>
> Ovirt masters : Please guide.
>
> Thanks in advance,
> Keyur
>
>
> ______________________________**_________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
>
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
>
>
>
>
>
>
> ______________________________**_________________
> Users mailing list
> Users(a)ovirt.org
>
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
>
>
4207
days inactive
4207
days old
5 comments
3 participants
participants (3)
-
Itamar Heim -
Keyur Makwana -
Yair Zaslavsky