Did you put the ovirt host into global maintenance mode? That may be the issue. Eric Evans Digital Data Services LLC. 304.660.9080 *From:* Maton, Brett <matonb(a)ltresources.co.uk&gt; *Sent:* Tuesday, March 31, 2020 2:35 PM *To:* Ovirt Users <users(a)ovirt.org&gt; *Subject:* [ovirt-users] Failing to redeploy self hosted engine I keep running into this error when I try to (re)deploy self-hosted engine. # ovirt-hosted-engine-cleanup # hosted-engine --deploy ... ... [ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error description] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The host has been set in non_operational status, deployment errors: code 9000: Failed to verify Power Management configuration for Host physhost01.example.com, fix accordingly and re-deploy."} I shut down all of the VM's and detached the storage before cleaning up and trying to re-deploy the hosted engine, first time I've run into this particular problem. Any help appreciated Brett

So, how would I go about disabling global maintenance when hosted engine isn't running? I tried editing /var/lib/ovirt-hosted-engine-ha/ha.conf and setting both values to False but that didn't help. local_maintenance=False local_maintenance_manual=False On Tue, 31 Mar 2020 at 23:01, Maton, Brett <matonb(a)ltresources.co.uk&gt; wrote: > Oooh probably... > > I'll give that a try in the morning, cheers for the tip! > > On Tue, 31 Mar 2020, 21:23 , <eevans(a)digitaldatatechs.com&gt; wrote: > >> Did you put the ovirt host into global maintenance mode? That may be the >> issue. >> >> >> >> Eric Evans >> >> Digital Data Services LLC. >> >> 304.660.9080 >> >> >> >> *From:* Maton, Brett <matonb(a)ltresources.co.uk&gt; >> *Sent:* Tuesday, March 31, 2020 2:35 PM >> *To:* Ovirt Users <users(a)ovirt.org&gt; >> *Subject:* [ovirt-users] Failing to redeploy self hosted engine >> >> >> >> I keep running into this error when I try to (re)deploy self-hosted >> engine. >> >> >> >> >> >> # ovirt-hosted-engine-cleanup >> >> # hosted-engine --deploy >> >> ... >> >> ... >> >> [ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error description] >> >> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The >> host has been set in non_operational status, deployment errors: code >> 9000: Failed to verify Power Management configuration for Host >> physhost01.example.com, fix accordingly and re-deploy."} >> >> >> >> I shut down all of the VM's and detached the storage before cleaning up >> and trying to re-deploy the hosted engine, first time I've run into this >> particular problem. >> >> >> >> Any help appreciated >> >> >> >> Brett >> >> >>

I currently don't have a hosted engine... I tried the usual command as you suggested, but that just says 'You must run deploy first' Basically, I need to remove the power management configuration so that it doesn't try to validate it during the hosted engine deployment. On Wed, 1 Apr 2020 at 05:37, Strahil Nikolov <hunter86_bg(a)yahoo.com&gt; wrote: > On April 1, 2020 6:51:49 AM GMT+03:00, "Maton, Brett" < > matonb(a)ltresources.co.uk&gt; wrote: > >So, how would I go about disabling global maintenance when hosted > >engine > >isn't running? > > > >I tried editing /var/lib/ovirt-hosted-engine-ha/ha.conf and setting > >both > >values to False but that didn't help. > > > >local_maintenance=False > >local_maintenance_manual=False > > > > > > > >On Tue, 31 Mar 2020 at 23:01, Maton, Brett <matonb(a)ltresources.co.uk&gt; > >wrote: > > > >> Oooh probably... > >> > >> I'll give that a try in the morning, cheers for the tip! > >> > >> On Tue, 31 Mar 2020, 21:23 , <eevans(a)digitaldatatechs.com&gt; wrote: > >> > >>> Did you put the ovirt host into global maintenance mode? That may be > >the > >>> issue. > >>> > >>> > >>> > >>> Eric Evans > >>> > >>> Digital Data Services LLC. > >>> > >>> 304.660.9080 > >>> > >>> > >>> > >>> *From:* Maton, Brett <matonb(a)ltresources.co.uk&gt; > >>> *Sent:* Tuesday, March 31, 2020 2:35 PM > >>> *To:* Ovirt Users <users(a)ovirt.org&gt; > >>> *Subject:* [ovirt-users] Failing to redeploy self hosted engine > >>> > >>> > >>> > >>> I keep running into this error when I try to (re)deploy self-hosted > >>> engine. > >>> > >>> > >>> > >>> > >>> > >>> # ovirt-hosted-engine-cleanup > >>> > >>> # hosted-engine --deploy > >>> > >>> ... > >>> > >>> ... > >>> > >>> [ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error > >description] > >>> > >>> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": > >"The > >>> host has been set in non_operational status, deployment errors: > >code > >>> 9000: Failed to verify Power Management configuration for Host > >>> physhost01.example.com, fix accordingly and re-deploy."} > >>> > >>> > >>> > >>> I shut down all of the VM's and detached the storage before cleaning > >up > >>> and trying to re-deploy the hosted engine, first time I've run into > >this > >>> particular problem. > >>> > >>> > >>> > >>> Any help appreciated > >>> > >>> > >>> > >>> Brett > >>> > >>> > >>> > > The command ia pushed to the OVFs in the shared storage , which the > ovirt-ha-agent is reading. > > hosted-engine --set-maintenance --mode=global > > Modes can be : global (all nodes), local (this node only), none (remove > maintenance). > > Best Regards, > Strrahil Nikolov >

On April 1, 2020 5:28:35 PM GMT+03:00, eevans(a)digitaldatatechs.com wrote: >https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/self-hosted_engine_guide/troubleshooting > > > >It should tell you the steps to take to troubleshoot your deployment. > > > >Eric Evans > >Digital Data Services LLC. > >304.660.9080 > > > > > >From: Maton, Brett <matonb(a)ltresources.co.uk&gt; >Sent: Tuesday, March 31, 2020 11:52 PM >To: eevans(a)digitaldatatechs.com >Cc: Ovirt Users <users(a)ovirt.org&gt; >Subject: [ovirt-users] Re: Failing to redeploy self hosted engine > > > >So, how would I go about disabling global maintenance when hosted >engine isn't running? > > > >I tried editing /var/lib/ovirt-hosted-engine-ha/ha.conf and setting >both values to False but that didn't help. > > > >local_maintenance=False >local_maintenance_manual=False > > > > > > > >On Tue, 31 Mar 2020 at 23:01, Maton, Brett <matonb(a)ltresources.co.uk ><mailto:matonb@ltresources.co.uk> > wrote: > >Oooh probably... > > > >I'll give that a try in the morning, cheers for the tip! > > > >On Tue, 31 Mar 2020, 21:23 , <eevans(a)digitaldatatechs.com ><mailto:eevans@digitaldatatechs.com> > wrote: > >Did you put the ovirt host into global maintenance mode? That may be >the issue. > > > >Eric Evans > >Digital Data Services LLC. > >304.660.9080 > > > > > >From: Maton, Brett <matonb(a)ltresources.co.uk ><mailto:matonb@ltresources.co.uk> > >Sent: Tuesday, March 31, 2020 2:35 PM >To: Ovirt Users <users(a)ovirt.org <mailto:users@ovirt.org> > >Subject: [ovirt-users] Failing to redeploy self hosted engine > > > >I keep running into this error when I try to (re)deploy self-hosted >engine. > > > > > ># ovirt-hosted-engine-cleanup > ># hosted-engine --deploy > >... > >... > >[ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error >description] > >[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The >host has been set in non_operational status, deployment errors: code >9000: Failed to verify Power Management configuration for Host >physhost01.example.com <http://physhost01.example.com> , fix >accordingly and re-deploy."} > > > >I shut down all of the VM's and detached the storage before cleaning up >and trying to re-deploy the hosted engine, first time I've run into >this particular problem. > > > >Any help appreciated > > > >Brett > > I'm not very pleased of this article.

Last time I needed to fix my HostedEngine, I couldn't find anything useful. Looking into retrospection , If I knew how to attach a rescue media and boot from it - it would take no more than 10 min to fix it - way faster than to restore from backup.

On Thu, Apr 2, 2020 at 7:41 AM Strahil Nikolov <hunter86_bg(a)yahoo.com&gt; wrote: > > On April 1, 2020 5:28:35 PM GMT+03:00, eevans(a)digitaldatatechs.com wrote: > >https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/self-hosted_engine_guide/troubleshooting > > > > > > > >It should tell you the steps to take to troubleshoot your deployment. > > > > > > > >Eric Evans > > > >Digital Data Services LLC. > > > >304.660.9080 > > > > > > > > > > > >From: Maton, Brett <matonb(a)ltresources.co.uk&gt; > >Sent: Tuesday, March 31, 2020 11:52 PM > >To: eevans(a)digitaldatatechs.com > >Cc: Ovirt Users <users(a)ovirt.org&gt; > >Subject: [ovirt-users] Re: Failing to redeploy self hosted engine > > > > > > > >So, how would I go about disabling global maintenance when hosted > >engine isn't running? > > > > > > > >I tried editing /var/lib/ovirt-hosted-engine-ha/ha.conf and setting > >both values to False but that didn't help. > > > > > > > >local_maintenance=False > >local_maintenance_manual=False > > > > > > > > > > > > > > > >On Tue, 31 Mar 2020 at 23:01, Maton, Brett <matonb(a)ltresources.co.uk > ><mailto:matonb@ltresources.co.uk> > wrote: > > > >Oooh probably... > > > > > > > >I'll give that a try in the morning, cheers for the tip! > > > > > > > >On Tue, 31 Mar 2020, 21:23 , <eevans(a)digitaldatatechs.com > ><mailto:eevans@digitaldatatechs.com> > wrote: > > > >Did you put the ovirt host into global maintenance mode? That may be > >the issue. > > > > > > > >Eric Evans > > > >Digital Data Services LLC. > > > >304.660.9080 > > > > > > > > > > > >From: Maton, Brett <matonb(a)ltresources.co.uk > ><mailto:matonb@ltresources.co.uk> > > >Sent: Tuesday, March 31, 2020 2:35 PM > >To: Ovirt Users <users(a)ovirt.org <mailto:users@ovirt.org> > > >Subject: [ovirt-users] Failing to redeploy self hosted engine > > > > > > > >I keep running into this error when I try to (re)deploy self-hosted > >engine. > > > > > > > > > > > ># ovirt-hosted-engine-cleanup > > > ># hosted-engine --deploy > > > >... > > > >... > > > >[ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error > >description] > > > >[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The > >host has been set in non_operational status, deployment errors: code > >9000: Failed to verify Power Management configuration for Host > >physhost01.example.com <http://physhost01.example.com> , fix > >accordingly and re-deploy."} > > > > > > > >I shut down all of the VM's and detached the storage before cleaning up > >and trying to re-deploy the hosted engine, first time I've run into > >this particular problem. > > > > > > > >Any help appreciated > > > > > > > >Brett > > > > > > I'm not very pleased of this article. One more place to check is: https://www.ovirt.org/images/Hosted-Engine-4.3-deep-dive.pdf I found it a few months ago, and added to the site under: https://www.ovirt.org/community/get-involved/resources/slide-decks.html But that one sadly isn't easy to find either. Google does know about it, but only if you know what to search for. We should probably add a few more internal links to make sure all content is easily accessible. > Last time I needed to fix my HostedEngine, I couldn't find anything useful. > Looking into retrospection , If I knew how to attach a rescue media and boot from it - it would take no more than 10 min to fix it - way faster than to restore from backup. There is an option '--vm-conf' you can use with '--vm-start', to pass your own libvirt-style conf. There you can add a virtual CD with an image or whatever. See slide 58 in above presentation. Best regards,

On Fri, Apr 3, 2020 at 1:47 AM Strahil Nikolov <hunter86_bg(a)yahoo.com&gt; wrote: > > On April 2, 2020 9:27:20 AM GMT+03:00, Yedidyah Bar David <didi(a)redhat.com&gt; wrote: > >On Thu, Apr 2, 2020 at 7:41 AM Strahil Nikolov <hunter86_bg(a)yahoo.com&gt; > >wrote: > >> > >> On April 1, 2020 5:28:35 PM GMT+03:00, eevans(a)digitaldatatechs.com > >wrote: > >> > >>https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/self-hosted_engine_guide/troubleshooting > >> > > >> > > >> > > >> >It should tell you the steps to take to troubleshoot your > >deployment. > >> > > >> > > >> > > >> >Eric Evans > >> > > >> >Digital Data Services LLC. > >> > > >> >304.660.9080 > >> > > >> > > >> > > >> > > >> > > >> >From: Maton, Brett <matonb(a)ltresources.co.uk&gt; > >> >Sent: Tuesday, March 31, 2020 11:52 PM > >> >To: eevans(a)digitaldatatechs.com > >> >Cc: Ovirt Users <users(a)ovirt.org&gt; > >> >Subject: [ovirt-users] Re: Failing to redeploy self hosted engine > >> > > >> > > >> > > >> >So, how would I go about disabling global maintenance when hosted > >> >engine isn't running? > >> > > >> > > >> > > >> >I tried editing /var/lib/ovirt-hosted-engine-ha/ha.conf and setting > >> >both values to False but that didn't help. > >> > > >> > > >> > > >> >local_maintenance=False > >> >local_maintenance_manual=False > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> >On Tue, 31 Mar 2020 at 23:01, Maton, Brett <matonb(a)ltresources.co.uk > >> ><mailto:matonb@ltresources.co.uk> > wrote: > >> > > >> >Oooh probably... > >> > > >> > > >> > > >> >I'll give that a try in the morning, cheers for the tip! > >> > > >> > > >> > > >> >On Tue, 31 Mar 2020, 21:23 , <eevans(a)digitaldatatechs.com > >> ><mailto:eevans@digitaldatatechs.com> > wrote: > >> > > >> >Did you put the ovirt host into global maintenance mode? That may be > >> >the issue. > >> > > >> > > >> > > >> >Eric Evans > >> > > >> >Digital Data Services LLC. > >> > > >> >304.660.9080 > >> > > >> > > >> > > >> > > >> > > >> >From: Maton, Brett <matonb(a)ltresources.co.uk > >> ><mailto:matonb@ltresources.co.uk> > > >> >Sent: Tuesday, March 31, 2020 2:35 PM > >> >To: Ovirt Users <users(a)ovirt.org <mailto:users@ovirt.org> > > >> >Subject: [ovirt-users] Failing to redeploy self hosted engine > >> > > >> > > >> > > >> >I keep running into this error when I try to (re)deploy self-hosted > >> >engine. > >> > > >> > > >> > > >> > > >> > > >> ># ovirt-hosted-engine-cleanup > >> > > >> ># hosted-engine --deploy > >> > > >> >... > >> > > >> >... > >> > > >> >[ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error > >> >description] > >> > > >> >[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": > >"The > >> >host has been set in non_operational status, deployment errors: > >code > >> >9000: Failed to verify Power Management configuration for Host > >> >physhost01.example.com <http://physhost01.example.com> , fix > >> >accordingly and re-deploy."} > >> > > >> > > >> > > >> >I shut down all of the VM's and detached the storage before cleaning > >up > >> >and trying to re-deploy the hosted engine, first time I've run into > >> >this particular problem. > >> > > >> > > >> > > >> >Any help appreciated > >> > > >> > > >> > > >> >Brett > >> > > >> > > >> > >> I'm not very pleased of this article. > > > >One more place to check is: > > > >https://www.ovirt.org/images/Hosted-Engine-4.3-deep-dive.pdf > > > >I found it a few months ago, and added to the site under: > > > >https://www.ovirt.org/community/get-involved/resources/slide-decks.html > > > >But that one sadly isn't easy to find either. Google does know about > >it, but only if you know what to search for. We should probably add a > >few more internal links to make sure all content is easily accessible. > > > >> Last time I needed to fix my HostedEngine, I couldn't find anything > >useful. > >> Looking into retrospection , If I knew how to attach a rescue media > >and boot from it - it would take no more than 10 min to fix it - way > >faster than to restore from backup. > > > >There is an option '--vm-conf' you can use with '--vm-start', to pass > >your own libvirt-style conf. There you can add a virtual CD with an > >image or whatever. > >See slide 58 in above presentation. > > > >Best regards, > > Hey Didi, > > Last time I tried the '--vm-conf' -> it didn't work :) > I hope it does now. I didn't try it myself (yet?). Did you open a bug? > > Anyway, that PDF is 10 times more valuable - I like it ! > > Maybe we can improve the ovirt page and make it more easy to find ? Patches are welcome! :-)) The website is hosted on github, in case anyone didn't notice, and updated using normal PRs. "Edit this page" links to github are in every page at the bottom. Best regards,