[Engine-devel] failed to add host into cluster
Chen, Wei D
wei.d.chen at intel.com
Tue Aug 6 06:44:15 UTC 2013
Hi,
[root at onode vdsm]# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:9fb571e343'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:9fb571e343
bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '0e:00:b7:57:2c:c9'},
'bond0': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '32:b3:88:1f:ef:91'}, 'bond1': {'addr': '',
'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '4e:e5:80:93:ea:d9'}, 'bond2': {'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask': '', 'slaves': [], 'hwaddr': '16:ab:f6:e4:f2:27'}, 'bond3': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves':
[], 'hwaddr': 'ee:55:f5:e7:31:7c'}}
bridges = {'ovirtmgmt': {'addr': '10.239.131.217', 'cfg': {'PEERROUTES': 'yes', 'DEVICE': 'ovirtmgmt', 'IPV6INIT': 'yes',
'UUID': 'b6ecfa9d-0deb-4213-9348-11137f76735d', 'IPV6_PEERDNS': 'yes', 'DEFROUTE': 'yes', 'PEERDNS': 'yes', 'IPV4_FAILURE_FATAL':
'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'IPV6_DEFROUTE': 'yes', 'IPV6_AUTOCONF': 'yes', 'IPV6_FAILURE_FATAL': 'no', 'TYPE':
'Bridge', 'ONBOOT': 'yes', 'BOOTPROTO': 'dhcp', 'IPV6_PEERROUTES': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0', 'stp': 'off',
'ports': ['em1']}}
clusterLevels = ['3.0', '3.1', '3.2']
cpuCores = 4
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge
cpuModel = Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
cpuSockets = 1
cpuSpeed = 3672.000
cpuThreads = 8
emulatedMachines = ['clipper', 'none']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = 10.239.131.222
lastClientIface = ovirtmgmt
management_ip =
memSize = 7944
netConfigDirty = False
networks = {'ovirtmgmt': {'iface': 'ovirtmgmt', 'addr': '10.239.131.217', 'cfg': {'PEERROUTES': 'yes', 'DEVICE': 'ovirtmgmt',
'IPV6INIT': 'yes', 'UUID': 'b6ecfa9d-0deb-4213-9348-11137f76735d', 'IPV6_PEERDNS': 'yes', 'DEFROUTE': 'yes', 'PEERDNS': 'yes',
'IPV4_FAILURE_FATAL': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'IPV6_DEFROUTE': 'yes', 'IPV6_AUTOCONF': 'yes', 'IPV6_FAILURE_FATAL':
'no', 'TYPE': 'Bridge', 'ONBOOT': 'yes', 'BOOTPROTO': 'dhcp', 'IPV6_PEERROUTES': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0',
'stp': 'off', 'bridged': True, 'gateway': '10.239.131.1', 'ports': ['em1']}}
nics = {'em1': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'hwaddr': '2c:41:38:b2:d0:e8', 'speed': 100}}
operatingSystem = {'release': '0.5', 'version': '19', 'name': 'Fedora'}
packages2 = {'kernel': {'release': '301.fc19.x86_64', 'buildtime': 1368462984.0, 'version': '3.9.2'}, 'spice-server':
{'release': '5.fc19', 'buildtime': 1366036951, 'version': '0.12.2'}, 'vdsm': {'release': '18.fc19', 'buildtime': 1373484771,
'version': '4.10.3'}, 'qemu-kvm': {'release': '4.fc19', 'buildtime': 1371653911, 'version': '1.4.2'}, 'libvirt': {'release': '1.fc19',
'buildtime': 1371074681, 'version': '1.0.5.2'}, 'qemu-img': {'release': '4.fc19', 'buildtime': 1371653911, 'version': '1.4.2'}, 'mom':
{'release': '2.fc19', 'buildtime': 1374564325, 'version': '0.3.2'}}
reservedMem = 321
software_revision = 18
software_version = 4.10
supportedENGINEs = ['3.0', '3.1']
supportedProtocols = ['2.2', '2.3']
uuid = 30BBC800-4F47-11E0-0000-2C4138B2D0E8
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']
Best Regards,
Dave Chen
> -----Original Message-----
> From: Laszlo Hornyak [mailto:lhornyak at redhat.com]
> Sent: Monday, August 05, 2013 8:35 PM
> To: Itamar Heim
> Cc: Chen, Wei D; Zhang, Lijuan; engine-devel at ovirt.org
> Subject: Re: [Engine-devel] failed to add host into cluster
>
> Hi,
>
> Dave, could you also share the vdsm log as well?
>
> I managed to reproduce this on the host that I am using for years and I am using it now, so it should not be a hardware problem.
> Probably
> some broken configuration caused some problem in vdsm before it would retrieve the capabilities information from libvirt.
>
>
>
> ----- Original Message -----
> > From: "Itamar Heim" <iheim at redhat.com>
> > To: "Laszlo Hornyak" <lhornyak at redhat.com>
> > Cc: "Wei D Chen" <wei.d.chen at intel.com>, "Lijuan Zhang"
> > <lijuan.zhang at intel.com>, engine-devel at ovirt.org
> > Sent: Monday, August 5, 2013 2:03:58 PM
> > Subject: Re: [Engine-devel] failed to add host into cluster
> >
> > On 08/05/2013 09:06 AM, Laszlo Hornyak wrote:
> > >
> > > ----- Original Message -----
> > >> From: "Wei D Chen" <wei.d.chen at intel.com>
> > >> To: "Itamar Heim" <iheim at redhat.com>
> > >> Cc: "Lijuan Zhang" <lijuan.zhang at intel.com>, engine-devel at ovirt.org
> > >> Sent: Monday, August 5, 2013 8:03:08 AM
> > >> Subject: Re: [Engine-devel] failed to add host into cluster
> > >>
> > >>
> > >>
> > >> Best Regards,
> > >> Dave Chen
> > >>
> > >>
> > >>> -----Original Message-----
> > >>> From: Itamar Heim [mailto:iheim at redhat.com]
> > >>> Sent: Sunday, August 04, 2013 10:25 PM
> > >>> To: Chen, Wei D
> > >>> Cc: engine-devel at ovirt.org; Zhang, Lijuan
> > >>> Subject: Re: [Engine-devel] failed to add host into cluster
> > >>>
> > >>> On 08/02/2013 09:34 AM, Chen, Wei D wrote:
> > >>>> Failed to add a node into cluster. I saw follow hints, but still
> > >>>> don't know how to fix it. OS is fedora 19 both for node and
> > >>>> engine, anyone can help me?
> > >>>>
> > >>>> Host *** does not comply with the cluster *** emulated machines.
> > >>>> The Hosts emulated machines are clipper,none and the cluster is
> > >>>> [rhel6.4.0, pc-1.0]}
> > >>>
> > >>> what Os is the host running?
> > >> fedora 19
> > >>> what does 'vdsClient -s 0 getVdsCaps' returns?
> > >> where to run this command? this command is not recognized both in
> > >> engine and node.
> > >
> > > After installing the host, you should have this command in the host OS.
> > >
> > >>
> > >> _______________________________________________
> > >> Engine-devel mailing list
> > >> Engine-devel at ovirt.org
> > >> http://lists.ovirt.org/mailman/listinfo/engine-devel
> > >>
> >
> > cat /proc/cpuinfo
> > and
> > virsh capabilities
> >
> > are also interesting
> >
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vdsm.log
Type: application/octet-stream
Size: 27590 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/devel/attachments/20130806/21575e9e/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6648 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/devel/attachments/20130806/21575e9e/attachment-0001.p7s>
More information about the Devel
mailing list