[Engine-devel] [Users] Fedora-18 installation within VM hungs during filesystem prepreations (Was: Unanble to start spice console._

Alon Bar-Lev alonbl at redhat.com
Sat May 4 22:35:39 UTC 2013



----- Original Message -----
> From: snmishra at linux.vnet.ibm.com
> To: "Alon Bar-Lev" <alonbl at redhat.com>
> Sent: Sunday, May 5, 2013 1:17:01 AM
> Subject: Re: [Users] Unanble to start spice console.
> 
> Well, I had to stop firewalld, iptables and selinux on both, the
> engine and host, to get it to work. Now, I am able to launch spice
> console.

Hmmm... this is quite intrusive... I would like to know what was the root cause.
selinux - I don't believe.
Can you please send me your /var/log/messages so I can see what was blocked?

> BUT, I am back to square one (remember I moved to otopi because my VM
> installs were hanging) ... When I try to start F18 installation on
> newly created VMs, it gets stuck at either "Preparing to install" or
> goes little further and stops at "Creating ext4 on
> /dev/mapper/fedora-root"

So let me understand... you have up and running engine, you can deploy host and its status is active.
Now when you create a VM it succeeds.
Then you boot from ISO image.
And the during installation within the VM we have an issue.
My first question... Do you use nested virtualization? as I did see this in my setup when using qemu provided with fedora-18 to run nested.
If not, can you please also attach /var/log/messages, and I guess vdsm logs... I hope Michal can instruct which resources are required for this.

> 
> Attached is the engine log. I tried pausing the VM, so ignore the
> error messages about failing to pause VM in engine.log. I have now
> waited for almost an hour with no progress on install, so I am sure
> that it is not just slow.
> 
> Thanks for your help. We need more people like you Alon. You are the best !!

You are most welcome!

> 
> -Sharad
> 
> Quoting Alon Bar-Lev <alonbl at redhat.com>:
> 
> > This is interesting.
> > Can you please attach complete engine.log?
> > I will try to forward it to someone who can help.
> > Thanks!
> >
> > ----- Original Message -----
> >> From: snmishra at linux.vnet.ibm.com
> >> To: "Alon Bar-Lev" <alonbl at redhat.com>
> >> Sent: Saturday, May 4, 2013 1:44:18 AM
> >> Subject: Re: [Users] Unanble to start spice console.
> >>
> >> Alon,
> >>
> >>     I updated my build env with the latest and noticed that
> >> GetCACertificateQuery.java is in there. After rebuilding and runnnig
> >> setup again, I am still unable to open spice console. Now I do NOT see
> >> the error dialod complaining about status code 500. Now when the
> >> console is selected, there is no activity. Looks  like the action is
> >> getting ignored. But I do see the following error message -
> >>
> >>
> >> 2013-05-03 18:43:00,261 INFO
> >> [org.ovirt.engine.core.bll.SetVmTicketCommand] (http--0.0.0.0-8080-4)
> >> [52e747b9] Running command: SetVmTicketCommand internal: false.
> >> Entities affected :  ID: 3bc7cc8c-16b6-491d-af57-edfe1a85178e Type: VM
> >> 2013-05-03 18:43:00,265 INFO
> >> [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand]
> >> (http--0.0.0.0-8080-4) [52e747b9] START,
> >> SetVmTicketVDSCommand(HostName = host26, HostId =
> >> 54e1b3f0-7b17-47b1-9302-c63d69d408bf,
> >> vmId=3bc7cc8c-16b6-491d-af57-edfe1a85178e, ticket=F7ewJvuonZqq,
> >> validTime=120,m userName=admin at internal,
> >> userId=fdfc627c-d875-11e0-90f0-83df133b58cc), log id: 4078d750
> >> 2013-05-03 18:43:00,286 INFO
> >> [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand]
> >> (http--0.0.0.0-8080-4) [52e747b9] FINISH, SetVmTicketVDSCommand, log
> >> id: 4078d750
> >>
> >> -Sharad
> >>
> >> Quoting Alon Bar-Lev <alonbl at redhat.com>:
> >>
> >> > Should be available now at the otopi branch at github.
> >> >
> >> > Please keep in mind that this is forced push, so you probably need:
> >> >
> >> > $ git fetch origin
> >> > $ git checkout master
> >> > $ git branch -D otopi
> >> > $ git checkout otopi
> >> >
> >> > Check if included:
> >> >
> >> > $ find . -name GetCACertificateQuery.java
> >> >
> >> > ----- Original Message -----
> >> >> From: "Alon Bar-Lev" <alonbl at redhat.com>
> >> >> To: snmishra at linux.vnet.ibm.com
> >> >> Cc: users at ovirt.org
> >> >> Sent: Friday, May 3, 2013 9:36:00 PM
> >> >> Subject: Re: [Users] Unanble to start spice console.
> >> >>
> >> >> This is my doing.
> >> >> I removed this class as I did not find any component that called it,
> >> >> apparently I have been mistaken.
> >> >> I guess you are you using the otopi development environment, right?
> >> >> Will be fixed in few moments.
> >> >>
> >> >> Thanks for the report!
> >> >>
> >> >>
> >> >> ----- Original Message -----
> >> >> > From: snmishra at linux.vnet.ibm.com
> >> >> > To: users at ovirt.org
> >> >> > Sent: Friday, May 3, 2013 9:15:14 PM
> >> >> > Subject: [Users] Unanble to start spice console.
> >> >> >
> >> >> >
> >> >> > After defining a new VM, hit 'Run Once' and chose to install F18 by
> >> >> > attaching an iso. The green arrow comes up next to the new  defined
> >> >> > VM. When I select to start the console, Error dialog pops up with
> >> >> > message -
> >> >> >
> >> >> > "Error while executing action: A Request to the Server failed with
> >> >> > the
> >> >> > following  Status Code: 500"
> >> >> >
> >> >> > Engine log has following to report -
> >> >> >
> >> >> > 013-05-03 14:08:32,363 INFO
> >> >> > [org.ovirt.engine.core.bll.SetVmTicketCommand] (http--0.0.0.0-8080-3)
> >> >> > [385b5ed5] Running command: SetVmTicketCommand internal: false.
> >> >> > Entities affected :  ID: cc00379f-5e70-4e62-85c2-a2a9f5a59dd3 Type:
> >> >> > VM
> >> >> > 2013-05-03 14:08:32,369 INFO
> >> >> > [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand]
> >> >> > (http--0.0.0.0-8080-3) [385b5ed5] START,
> >> >> > SetVmTicketVDSCommand(HostName = host26, HostId =
> >> >> > 54e1b3f0-7b17-47b1-9302-c63d69d408bf,
> >> >> > vmId=cc00379f-5e70-4e62-85c2-a2a9f5a59dd3, ticket=+Q4Hkz4CCAjI,
> >> >> > validTime=120,m userName=admin at internal,
> >> >> > userId=fdfc627c-d875-11e0-90f0-83df133b58cc), log id: 73e73b73
> >> >> > 2013-05-03 14:08:32,389 INFO
> >> >> > [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand]
> >> >> > (http--0.0.0.0-8080-3) [385b5ed5] FINISH, SetVmTicketVDSCommand, log
> >> >> > id: 73e73b73
> >> >> > 2013-05-03 14:08:32,452 WARN
> >> >> > [org.ovirt.engine.core.bll.CommandsFactory] (http--0.0.0.0-8080-3)
> >> >> > Unable to find class for action: GetCACertificateQuery
> >> >> >
> >> >> > Thanks
> >> >> > Sharad
> >> >> >
> >> >> > _______________________________________________
> >> >> > Users mailing list
> >> >> > Users at ovirt.org
> >> >> > http://lists.ovirt.org/mailman/listinfo/users
> >> >> >
> >> >> _______________________________________________
> >> >> Users mailing list
> >> >> Users at ovirt.org
> >> >> http://lists.ovirt.org/mailman/listinfo/users
> >> >>
> >>
> >>
> >>
> >>
> 
> 
> 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: engine.log
Type: text/x-log
Size: 2862442 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/devel/attachments/20130504/5ee4f311/attachment-0001.bin>


More information about the Devel mailing list