[ovirt-devel] blockcommit and gluster network disk path

[Sahina Bose]

On Mon, Nov 21, 2016 at 3:32 PM, Sahina Bose <sabose at redhat.com> wrote:

> Hi,
>
> I'm running into problems with blockcommit and gluster network disks -
> wanted to check how to pass path for network disks. How's the protocol and
> host parameters specified?
>
> For a backing volume chain as below, executing
> virsh blockcommit fioo5 vmstore/912d9062-3881-479b-
> a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-
> 8fda54a6d8a4/027a3b37-77d4-4fa9-8173-b1fedba1176c --base
> vmstore/912d9062-3881-479b-a6e5-7b074a252cb6/images/
> 27b0cbcb-4dfd-4eeb-8ab0-8fda54a6d8a4/d4c23ec6-20ce-4a2f-9b32-ca91e65a114a
> --top vmstore/912d9062-3881-479b-a6e5-7b074a252cb6/images/
> 27b0cbcb-4dfd-4eeb-8ab0-8fda54a6d8a4/027a3b37-77d4-4fa9-8173-b1fedba1176c
> --verbose --wait
>
> gives "error: invalid argument: No device found for specified path".
>


I can get this to work if I provide index based argument. Is this the only
supported way?

virsh blockcommit fioo5 vda --base vda[1] --active --verbose --wait


>
> <disk type='network' device='disk' snapshot='no'>
> <driver name='qemu' type='qcow2' cache='none' error_policy='stop'
> io='threads'/>
> <source protocol='gluster' name='vmstore/912d9062-3881-47
> 9b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6
> d8a4/027a3b37-77d4-4fa9-8173-b1fedba1176c'>
> <host name='10.70.37.28' port='0'/>
> </source>
> <backingStore type='network' index='1'>
> <format type='qcow2'/>
> <source protocol='gluster' name='vmstore/912d9062-3881-47
> 9b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6
> d8a4/d4c23ec6-20ce-4a2f-9b32-ca91e65a114a'>
> <host name='10.70.37.28' port='0'/>
> </source>
> <backingStore type='network' index='2'>
> <format type='raw'/>
> <source protocol='gluster' name='vmstore/912d9062-3881-47
> 9b-a6e5-7b074a252cb6/images/27b0cbcb-4dfd-4eeb-8ab0-8fda54a6
> d8a4/f5098809-e719-404b-8d80-3f824f4333a2'>
> <host name='10.70.37.28' port='0'/>
> </source>
> <backingStore/>
> </backingStore>
> </backingStore>
> <target dev='vda' bus='virtio'/>
> <serial>27b0cbcb-4dfd-4eeb-8ab0-8fda54a6d8a4</serial>
> <boot order='2'/>
> <alias name='virtio-disk0'/>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
> </disk>
>
>
>
> thanks
> sahina
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/devel/attachments/20161122/59b95aeb/attachment.html>