[Kimchi-devel] [PATCH] Added help for host and network tab. Edited help for guests, storage, and templates tab. Signed-off-by: Kersten Richter <kersten at us.ibm.com>
Aline Manera
alinefm at linux.vnet.ibm.com
Tue Mar 4 19:59:46 UTC 2014
Thanks for this patch.
Some minor comments below.
On 03/04/2014 03:50 PM, Kersten Richter wrote:
> ---
> ui/pages/help/guests.dita | 146 +++++++++++++++++++++++-----------
> ui/pages/help/host.dita | 51 ++++++++++++
> ui/pages/help/network.dita | 68 ++++++++++++++++
> ui/pages/help/storage.dita | 135 +++++++++++++++++++++-----------
> ui/pages/help/templates.dita | 179 ++++++++++++++++++++++++++++--------------
> 5 files changed, 428 insertions(+), 151 deletions(-)
> create mode 100644 ui/pages/help/host.dita
> create mode 100644 ui/pages/help/network.dita
>
> diff --git a/ui/pages/help/guests.dita b/ui/pages/help/guests.dita
> index cc6294c..bae98bb 100644
> --- a/ui/pages/help/guests.dita
> +++ b/ui/pages/help/guests.dita
> @@ -1,47 +1,99 @@
> -<?xml version="1.0" encoding="UTF-8"?>
> -<?Pub Sty _display FontColor="red"?>
> -<?Pub Inc?>
> -<cshelp id="kimhvirtm" xml:lang="en-us">
> - <title>Virtual machines</title>
> - <shortdesc>The Virtual machines page lists the defined KVM virtual
> -machines.</shortdesc>
> - <csprolog>
> - <csmetadata>
> - <cswindowtitle>Title of window or panel associated with this help;
> -for review output only.</cswindowtitle>
> - <cswidgetlabel>Name of field or control associated with this help;
> -for review output only</cswidgetlabel>
> - </csmetadata>
> - </csprolog>
> - <csbody>
> - <p>For each virtual machine, the following information is displayed:<dl><dlentry><dt>Name</dt><dd>Name of the virtual machine.</dd></dlentry><dlentry><dt>CPU</dt><dd>Percentage of processor utilization in the virtual machine.</dd></dlentry><dlentry><dt>Network I/O</dt><dd>Network input/output transmission rate in KB per seconds.</dd></dlentry><dlentry><dt>Disk I/O</dt><dd> Disk input/output transmission rate in KB per seconds.</dd></dlentry><dlentry><dt>Console</dt><dd>Current state of guest operating system console.</dd></dlentry></dl></p>
> - <p>The following actions icons are displayed for each virtual machine:<dl><dlentry><dt>Reload</dt><dd>Click to reload the displayed data. </dd></dlentry><dlentry><dt>Power</dt><dd>Click to power on the virtual machine. If the icon is red, the
> -power is off; if the icon is green, the power is on.</dd></dlentry></dl> </p>
> - <p>The following actions can be selected for each virtual machine:<ul><li>Select <uicontrol>VNC</uicontrol> to connect to the remote console
> -for the virtual machine.</li><li>Select <uicontrol>Delete</uicontrol> to delete the virtual machine.</li></ul>To create a virtual machine, click the <uicontrol>plus (+)</uicontrol> icon
> -in the upper right of the page.</p>
> - </csbody>
> - <cshelp id="kimhvirtmcrt" xml:lang="en-us">
> - <title>Create virtual machine</title>
> - <shortdesc>Create a virtual machine using an existing template.</shortdesc>
> - <csprolog>
> - <csmetadata>
> - <cswindowtitle>Title of window or panel associated with this help;
> -for review output only.</cswindowtitle>
> - <cswidgetlabel>Name of field or control associated with this help;
> -for review output only</cswidgetlabel>
> - </csmetadata>
> - </csprolog>
> - <csbody>
> - <p>
> - <ol>
> - <li>Type the name to be used to identify the virtual machine.</li>
> - <li>Click to select a template.</li>
> - <li>Click <uicontrol>Create</uicontrol>.</li>
> - </ol>
> - </p>
> - </csbody>
> - </cshelp>
> - <?Pub Caret -1?>
> -</cshelp>
> -<?Pub *0000002746?>
> +<?xml version="1.0" encoding="UTF-8"?>
> +<!--Arbortext, Inc., 1988-2011, v.4002-->
> +<!DOCTYPE cshelp PUBLIC "-//IBM//DTD DITA CSHelp//EN"
> + "..\dtd\cshelp.dtd">
> +<?Pub Sty _display FontColor="red"?>
> +<?Pub Inc?>
> +<!--This DITA specialized document type is not supported by the Authoring Tools development team.
> +For support please see:
> +https://w3.opensource.ibm.com/projects/dita-cshelp/-->
> +<cshelp id="kimhvirtm" xml:lang="en-us">
> +<title>Guests</title>
> +<shortdesc>The <wintitle>Guests</wintitle> page lists the defined
> +KVM virtual machines.</shortdesc>
> +<csbody>
> +<p>For each guest, the following information is displayed:<dl><dlentry>
> +<dt>Name</dt>
> +<dd>Name of the virtual machine.</dd>
> +</dlentry><dlentry>
> +<dt>CPU</dt>
> +<dd>Percentage of processor utilization in the virtual machine.</dd>
> +</dlentry><dlentry>
> +<dt>Network I/O</dt>
> +<dd>Network input/output transmission rate in KB per seconds.</dd>
> +</dlentry><dlentry>
> +<dt>Disk I/O</dt>
> +<dd> Disk input/output transmission rate in KB per seconds.</dd>
> +</dlentry><dlentry>
> +<dt>Livetile</dt>
> +<dd rev="rev1">State of guest operating system console, or an icon
> +that represents the <tm tmtype="tm" trademark="Linux">Linux</tm> distribution
> +if the guest is not active.</dd>
> +</dlentry></dl></p>
> +<p>The following actions icons are displayed for each guest:<dl>
> +<dlentry>
> +<dt rev="rev1">Reset</dt>
> +<dd rev="rev1">Click to reset the guest. </dd>
> +</dlentry><dlentry>
> +<dt><tm tmclass="IGNORE" tmtype="reg" trademark="Power">Power</tm> (Start
> +or Stop)</dt>
> +<dd>Click to power on or power off the guest. If the icon is red,
> +the power is off; if the icon is green, the power is on.</dd>
> +</dlentry></dl> </p>
> +<p>The following actions can be selected for each guest:<ul>
> +<li>Select <uicontrol>VNC</uicontrol> to connect to the remote console
> +for the guest operating system.</li>
> +<li>Select <uicontrol>Edit</uicontrol> to edit the properties of an
> +existing guest. Guests can be edited only while stopped.</li>
> +<li>Select <uicontrol>Delete</uicontrol> to delete the guest.</li>
> +</ul>To create a guest, or virtual machine, click the <uicontrol>plus
> +(+)</uicontrol> icon in the upper right of the page.</p>
> +</csbody>
> +<cshelp id="kimhvirtmcrt" xml:lang="en-us">
> +<title>Create virtual machine</title>
> +<shortdesc>Create a virtual machine by using an existing template.</shortdesc>
> +<csbody>
> +<p> <ol>
> +<li>Type the name to be used to identify the virtual machine.</li>
> +<li rev="rev1">Select a template. <ul>
> +<li>If templates exist, select from displayed templates.</li>
> +<li>If no templates exist, click <uicontrol>Create a template</uicontrol> to
> +create a template.</li>
> +</ul></li>
> +<li>Click <uicontrol>Create</uicontrol>.</li>
> +</ol> </p>
> +</csbody>
> +</cshelp>
> +<cshelp id="kimhvirtmedit" xml:lang="en-us">
> +<title>Edit guest</title>
> +<shortdesc rev="rev1">Edit the properties of an existing virtual machine.
> +Guests can be edited only while stopped.</shortdesc>
> +<csprolog><csmetadata>
> +<cswindowtitle>Title of window or panel associated with this help;
> +for review output only.</cswindowtitle>
> +<cswidgetlabel>Name of field or control associated with this help;
> +for review output only</cswidgetlabel>
> +</csmetadata></csprolog>
> +<csbody>
> +<p>For each guest, the following information is displayed:<dl><dlentry>
> +<dt>Name</dt>
> +<dd>Name of the virtual machine.</dd>
> +</dlentry><dlentry>
> +<dt>CPUs</dt>
> +<dd>Number of processors.</dd>
> +</dlentry><dlentry>
> +<dt>Memory</dt>
> +<dd>Amount of memory in MB.</dd>
> +</dlentry><dlentry>
> +<dt>Icon</dt>
> +<dd rev="rev2"> Graphic image representing the Linux distribution
> +to be displayed in place of current status (Livetile) when the guest
> +is not active.</dd>
> +</dlentry></dl></p>
> +<p> Fields that are not disabled can be edited. After you edit a field,
> +click <uicontrol>Save</uicontrol>. </p>
> +</csbody>
> +</cshelp><?Pub Caret -1?>
> +<?tm 1391540919 3?>
> +</cshelp>
> +<?Pub *0000003805?>
> diff --git a/ui/pages/help/host.dita b/ui/pages/help/host.dita
> new file mode 100644
> index 0000000..d961edc
> --- /dev/null
> +++ b/ui/pages/help/host.dita
> @@ -0,0 +1,51 @@
> +<?xml version="1.0" encoding="UTF-8"?>
> +<!--Arbortext, Inc., 1988-2011, v.4002-->
> +<!DOCTYPE cshelp PUBLIC "-//IBM//DTD DITA CSHelp//EN"
> + "..\dtd\cshelp.dtd">
> +<?Pub Sty _display FontColor="red"?>
> +<?Pub Inc?>
> +<!--This DITA specialized document type is not supported by the Authoring Tools development team.
> +For support please see:
> +https://w3.opensource.ibm.com/projects/dita-cshelp/-->
> +<cshelp id="kimhhost" xml:lang="en-us">
> +<title>Host</title>
> +<shortdesc rev="rev1">The <wintitle>Host</wintitle> page shows information
> +about the host system, and allows you to shut down, restart, and connect
> +to the host.</shortdesc>
> +<csbody>
> +<p>You can perform the following actions on the host:<ul>
> +<li>Select <uicontrol>Shut down</uicontrol> to shut down the host
> +system.</li>
> +<li>Select <uicontrol>Restart</uicontrol> to restart the host system.</li>
> +<li rev="rev1">Select <uicontrol>Connect</uicontrol> to open a VNC
> +connection to the host system, if it is not already connected.</li>
> +</ul></p>
> +<p>Click the following sections to display information about the host:<dl>
> +<dlentry>
> +<dt>Basic information</dt>
> +<dd>This section displays the host operating system distribution,
> +version, and code name, as well as the processor type and amount of
> +memory in GB.</dd>
> +</dlentry><dlentry>
> +<dt>System statistics</dt>
> +<dd rev="rev1">This section displays graphs to show statistics for
> +CPU, memory, disk I/O, and network I/O for the host. Select <uicontrol>Collecting
> +data after leaving this page</uicontrol> to continue collecting data
> +when the host tab is out of view.</dd>
> +</dlentry><dlentry>
> +<dt>Debug reports</dt>
> +<dd rev="rev1">This section displays debug reports, including name
> +and file path. You can select from options to generate a new report,
> +or rename, remove, or download an existing report.<p>The debug report
> +is generated using the <cmdname>sosreport</cmdname> command. It is
> +available for Red Hat Enterprise <tm tmtype="tm" trademark="Linux">Linux</tm>,
> +Fedora, and Ubuntu distributions. The command generates a .tar file
> +that contains configuration and diagnostic information, such as the
> +running kernel version, loaded modules, and system and service configuration
> +files. The command also runs external programs to collect further
> +information and stores this output in the resulting archive.</p> </dd>
> +</dlentry></dl></p>
> +</csbody><?Pub Caret -2?>
> +<?tm 1392659967 1?>
> +</cshelp>
> +<?Pub *0000002392?>
> diff --git a/ui/pages/help/network.dita b/ui/pages/help/network.dita
> new file mode 100644
> index 0000000..4846d5b
> --- /dev/null
> +++ b/ui/pages/help/network.dita
> @@ -0,0 +1,68 @@
> +<?xml version="1.0" encoding="UTF-8"?>
> +<!--Arbortext, Inc., 1988-2011, v.4002-->
> +<!DOCTYPE cshelp PUBLIC "-//IBM//DTD DITA CSHelp//EN"
> + "..\dtd\cshelp.dtd">
> +<?Pub Sty _display FontColort="red"?>
> +<?Pub Inc?>
> +<!--This DITA specialized document type is not supported by the Authoring Tools development team.
> +For support please see:
> +https://w3.opensource.ibm.com/projects/dita-cshelp/-->
> +<cshelp id="kimhnetw" xml:lang="en-us">
> +<title>Network</title>
> +<shortdesc>The <wintitle>Network</wintitle> page displays information
> +about the network connection.</shortdesc>
> +<csbody>
> +<p><dl><dlentry>
> +<dt>Network Name</dt>
> +<dd>Name of the network, or <uicontrol>default</uicontrol>.</dd>
> +</dlentry><dlentry>
> +<dt>State</dt>
> +<dd>State of the network, active (green) or inactive (red). </dd>
> +</dlentry><dlentry>
> +<dt>Network type</dt>
> +<dd>Network type, for example, <uicontrol>NAT</uicontrol> (network
> +address translation).</dd>
> +</dlentry><dlentry>
> +<dt>Interface</dt>
> +<dd>Network interface, for example, <uicontrol>virbr0</uicontrol> (default).</dd>
> +</dlentry><dlentry>
> +<dt>Address space</dt>
> +<dd>IP address.</dd>
> +</dlentry></dl></p>
> +<p>The following actions can be selected:<ul>
> +<li rev="rev1">Select <uicontrol>Start</uicontrol> to begin the network
> +connection.</li>
> +<li>Select <uicontrol>Stop</uicontrol> to end the network connection.</li>
> +<li>Select <uicontrol>Delete</uicontrol> to delete the connection
> +information.</li>
> +</ul>To create a network, click the <uicontrol>plus (+)</uicontrol> icon
> +in the upper right of the display.</p>
> +</csbody>
> +<cshelp id="kimhnetwcrt" xml:lang="en-us">
> +<title>Create a network</title>
> +<shortdesc>Create a network.</shortdesc>
> +<csbody>
> +<p> <ol>
> +<li>Type the name of the network.</li>
> +<li>Click to select the network type. <dl rev="rev1"><dlentry>
> +<dt><uicontrol>Isolated</uicontrol></dt>
> +<dd>Isolated mode. Guests cannot send or receive communication to
> +or from external systems.</dd>
> +</dlentry><dlentry>
> +<dt><uicontrol>NAT</uicontrol></dt>
> +<dd>Network Address Translation mode. Communication from guests to
> +external systems uses the host IP address. External systems cannot
> +initiate communication to guests.</dd>
> +</dlentry><dlentry>
> +<dt><uicontrol>Bridged</uicontrol></dt>
> +<dd>Bridged mode. Guests can communicate with external systems and
> +be contacted by external systems as if they were physical systems
> +on the network. For bridged mode, you must specify additional destination
> +and VLAN information.</dd>
> +</dlentry></dl><?Pub Caret 224?></li>
> +<li>Click <uicontrol>Create</uicontrol>.</li>
> +</ol> </p>
> +</csbody>
> +</cshelp>
> +</cshelp>
> +<?Pub *0000002571?>
> diff --git a/ui/pages/help/storage.dita b/ui/pages/help/storage.dita
> index f9ae93e..9ad0ea4 100644
> --- a/ui/pages/help/storage.dita
> +++ b/ui/pages/help/storage.dita
> @@ -1,45 +1,90 @@
> -<?xml version="1.0" encoding="UTF-8"?>
> -<?xml-stylesheet href="dita.xsl" type="text/xsl" ?>
> -<?Pub Sty _display FontColor="red"?>
> -<?Pub Inc?>
> -<cshelp id="kimhstor" xml:lang="en-us">
> - <title>Storage</title>
> - <shortdesc>The Storage page lists the available storage pools, including the default storage pool.</shortdesc>
> - <csprolog>
> - <csmetadata>
> - <cswindowtitle>Title of window or panel associated with this help; for review output only.</cswindowtitle>
> - <cswidgetlabel>Name of field or control associated with this help; for review output only</cswidgetlabel>
> - </csmetadata>
> - </csprolog>
> - <csbody>
> - <p>For each storage pool, the following information is displayed:<dl><dlentry><dt>Name</dt><dd>Name of the storage pool and percentage used.</dd></dlentry><dlentry><dt>State</dt><dd>State of the storage pool, active (green) or inactive (red). </dd></dlentry><dlentry><dt>Location</dt><dd>File path to the location of the storage pool.</dd></dlentry><dlentry><dt>Type</dt><dd><uicontrol>dir</uicontrol> for directory.</dd></dlentry><dlentry><dt>Capacity</dt><dd>Amount of space in the storage pool.</dd></dlentry><dlentry><dt>Allocated</dt><dd>Amount of space already allocated in the storage pool.</dd></dlentry></dl></p>
> - <p>The following actions can be selected for each storage pool:<ul><li>Select <uicontrol>Activate</uicontrol> to activate the storage
> -pool so that it can be used.</li><li>Select <uicontrol>Undefine</uicontrol> to remove an inactive storage
> -pool.</li></ul></p>
> - <p>To display storage volume details for a storage pool, click the
> -arrow on the right side of the storage pool row. Details include
> -the following:<dl><dlentry><dt>Type</dt><dd>The type of storage pool, for example, dir or disk.</dd></dlentry><dlentry><dt>Format</dt><dd>The format, varying dependent on the type.</dd></dlentry><dlentry><dt>Capacity</dt><dd>Size of the storage volume.</dd></dlentry><dlentry><dt>Allocated</dt><dd>Amount of space already allocated in the storage pool.</dd></dlentry></dl>To define a storage pool, click the <uicontrol>plus
> -(+)</uicontrol> icon in the upper right of the display.</p>
> - </csbody>
> - <cshelp id="kimhdefstor" xml:lang="en-us">
> - <title>Define a storage pool</title>
> - <shortdesc> Define a storage pool.</shortdesc>
> - <csprolog>
> - <csmetadata>
> - <cswindowtitle>Title of window or panel associated with this help; for review output only.</cswindowtitle>
> - <cswidgetlabel>Name of field or control associated with this help; for review output only</cswidgetlabel>
> - </csmetadata>
> - </csprolog>
> - <csbody>
> - <p>
> - <ol>
> - <li>Type the name to be used to identify the storage pool.</li>
> - <li>Type the file path to the storage pool.</li>
> - <li>Click <uicontrol>Create</uicontrol>.</li>
> - </ol>
> - </p>
> - </csbody>
> - </cshelp>
> - <?Pub Caret -1?>
> -</cshelp>
> -<?Pub *0000003013?>
> +<?xml version="1.0" encoding="UTF-8"?>
> +<!--Arbortext, Inc., 1988-2011, v.4002-->
> +<!DOCTYPE cshelp PUBLIC "-//IBM//DTD DITA CSHelp//EN"
> + "..\dtd\cshelp.dtd">
> +<?Pub Sty _display FontColor="red"?>
> +<?Pub Inc?>
> +<!--This DITA specialized document type is not supported by the Authoring Tools development team.
> +For support please see:
> +https://w3.opensource.ibm.com/projects/dita-cshelp/-->
> +<cshelp id="kimhstor" xml:lang="en-us">
> +<title>Storage</title>
> +<shortdesc>The <wintitle>Storage</wintitle> page lists the available
> +storage pools, including the default storage pool.</shortdesc>
> +<csbody>
> +<p>For each storage pool, the following information is displayed:<dl>
> +<dlentry>
> +<dt>Name</dt>
> +<dd>Name of the storage pool and percentage used.</dd>
> +</dlentry><dlentry>
> +<dt>State</dt>
> +<dd>State of the storage pool, active (green) or inactive (red). </dd>
> +</dlentry><dlentry>
> +<dt>Location</dt>
> +<dd>File path to the location of the storage pool.</dd>
> +</dlentry><dlentry>
> +<dt>Type</dt>
> +<dd>Type of storage pool, for example, <uicontrol>dir</uicontrol>.</dd>
> +</dlentry><dlentry>
> +<dt>Capacity</dt>
> +<dd>Amount of space in the storage pool.</dd>
> +</dlentry><dlentry>
> +<dt>Allocated</dt>
> +<dd>Amount of space that is already allocated in the storage pool.</dd>
> +</dlentry></dl></p>
> +<p>The following actions can be selected for each storage pool:<ul>
> +<li>Select <uicontrol>Activate</uicontrol> to activate the storage
> +pool so that it can be used.</li>
> +<li>Select <uicontrol>Deactivate</uicontrol> to deactivate an active
> +storage pool.</li>
> +<li>Select <uicontrol>Undefine</uicontrol> to remove an inactive storage
> +pool.</li>
> +</ul></p>
> +<p>To display storage volume details for a storage pool, click the
> +arrow on the right side of the storage pool row. Details include
> +the following:<dl><dlentry>
> +<dt>Type</dt>
> +<dd>The type of volume, for example, <uicontrol>file</uicontrol>.</dd>
> +</dlentry><dlentry>
> +<dt>Format</dt>
> +<dd>The format, varying dependent on the type.</dd>
> +</dlentry><dlentry>
> +<dt>Capacity</dt>
> +<dd>Size of the storage volume.</dd>
> +</dlentry><dlentry>
> +<dt>Allocation</dt>
> +<dd>Amount of space that is already allocated in the storage pool.</dd>
> +</dlentry></dl><?Pub Caret -2?>To define a storage pool, click the <uicontrol>plus
> +(+)</uicontrol> icon in the upper right of the display.</p>
> +</csbody>
> +<cshelp id="kimhdefstor" xml:lang="en-us">
> +<title>Define a storage pool</title>
> +<shortdesc> Define a storage pool.</shortdesc>
> +<csbody>
> +<p> <ol>
> +<li>In the <uicontrol>Storage pool name</uicontrol> field, type the
> +name to be used to identify the storage pool.</li>
> +<li>In the <uicontrol>Storage pool type</uicontrol> list, select the
> +type: <dl rev="rev1"><dlentry>
> +<dt><uicontrol>DIR</uicontrol></dt>
> +<dd>Specifies a directory pool. When selecting <uicontrol>DIR</uicontrol>,
> +type the <uicontrol>Storage path</uicontrol> (file path to the storage
> +pool).</dd>
> +</dlentry><dlentry>
> +<dt><uicontrol>NFS</uicontrol></dt>
> +<dd>Specifies a network filesystem pool. When selecting <uicontrol>NFS</uicontrol>,
> +type the <uicontrol>NFS server IP</uicontrol> address and <uicontrol>NFS
> +path</uicontrol> (path of the exported directory).</dd>
> +</dlentry><dlentry>
> +<dt><uicontrol>iSCSI</uicontrol></dt>
> +<dd>Specifies a pool based on a target allocated on an iSCSI server.
> +When selecting <uicontrol>iSCSI</uicontrol>, type the <uicontrol>iSCSI
> +server</uicontrol> IP address and <uicontrol>Target</uicontrol> on
> +the iSCSI server. You can optionally select to add iSCSI authentication.</dd>
> +</dlentry></dl></li>
"Logical" and "SCSI Fibre Channel" are also available to the user.
> +<li>Click <uicontrol>Create</uicontrol>.</li>
> +</ol> </p>
> +</csbody>
> +</cshelp>
> +</cshelp>
> +<?Pub *0000003580?>
> diff --git a/ui/pages/help/templates.dita b/ui/pages/help/templates.dita
> index 0a9bcff..5048fc8 100644
> --- a/ui/pages/help/templates.dita
> +++ b/ui/pages/help/templates.dita
> @@ -1,59 +1,120 @@
> -<?xml version="1.0" encoding="UTF-8"?>
> -<?Pub Sty _display FontColor="red"?>
> -<?Pub Inc?>
> -<cshelp id="kimhtempl" xml:lang="en-us">
> - <title>Templates</title>
> - <shortdesc>The Templates page shows the defined virtual machine templates
> -that can be used to create KVM virtual machines.</shortdesc>
> - <csprolog>
> - <csmetadata>
> - <cswindowtitle>Title of window or panel associated with this help;
> -for review output only.</cswindowtitle>
> - <cswidgetlabel>Name of field or control associated with this help;
> -for review output only</cswidgetlabel>
> - </csmetadata>
> - </csprolog>
> - <csbody>
> - <p>For each template, the following information is displayed:<dl><dlentry><dt>OS</dt><dd>Name of the operating system or distribution.</dd></dlentry><dlentry><dt>Version</dt><dd>Version of the operating system or distribution.</dd></dlentry><dlentry><dt>CPU</dt><dd>Number of processors defined for the template.</dd></dlentry><dlentry><dt>Memory</dt><dd>Amount of random access memory to be allocated, in MB.</dd></dlentry></dl></p>
> - <p>The following actions can be selected for each template:<ul><li>Select <uicontrol>Edit</uicontrol> to edit the template.</li><li>Select <uicontrol>Delete</uicontrol> to delete the template.</li></ul>To add a template, click the <uicontrol>plus (+)</uicontrol> icon
> -in the upper right of the display.</p>
> - </csbody>
> - <cshelp id="kimhedittempl" xml:lang="en-us">
> - <title>Edit template</title>
> - <shortdesc>Edit an existing template.</shortdesc>
> - <csprolog>
> - <csmetadata>
> - <cswindowtitle>Title of window or panel associated with this help;
> -for review output only.</cswindowtitle>
> - <cswidgetlabel>Name of field or control associated with this help;
> -for review output only</cswidgetlabel>
> - </csmetadata>
> - </csprolog>
> - <csbody>
> - <p><ol><li>Edit the following information for the template:<dl><dlentry><dt>Name</dt><dd>Name of the template.</dd></dlentry><dlentry><dt>CPU</dt><dd>Number of processors defined for the template.</dd></dlentry><dlentry><dt>Memory</dt><dd>Memory to be allocated to the virtual machine.</dd></dlentry></dl></li><li>Click <uicontrol>Save</uicontrol>.</li></ol>The following information is displayed but cannot be edited:<dl><dlentry><dt>Vendor</dt><dd>The name of the company that created the operating system or distribution
> -that the template is configured to use.</dd></dlentry><dlentry><dt>Version</dt><dd>The version of the operating system or distribution that the template
> -is configured to use.</dd></dlentry></dl></p>
> - </csbody>
> - </cshelp>
> - <?Pub Caret -1?>
> - <cshelp id="kimhaddtempl">
> - <title>Add template</title>
> - <shortdesc>Add a template from source media.</shortdesc>
> - <csbody>
> - <p>Select the location from the following options:<ol><li>Select the location of the source media from the following options:<dl><dlentry><dt>Local ISO image</dt><dd>Select to scan storage pools for installation ISO images available
> -on the system.</dd></dlentry><dlentry><dt>Remote ISO image</dt><dd>Select to specify a remote location for an installation ISO image.</dd></dlentry></dl></li><li>Click <uicontrol>Create</uicontrol>.</li></ol></p>
> - </csbody>
> - </cshelp>
> - <cshelp id="kimhaddloct">
> - <title>Add template - local ISO image</title>
> - <shortdesc>Add a template from a local ISO image.</shortdesc>
> - <csbody>
> - <p>The ISO images available on the system are displayed.<dl><dlentry><dt>OS</dt><dd>Name of the operating system or distribution.</dd></dlentry><dlentry><dt>Version</dt><dd>Version of the operating system or distribution.</dd></dlentry><dlentry><dt>Size</dt><dd>Size of the ISO image.</dd></dlentry></dl></p>
> - <p>To create a template from an ISO image, complete the following
> -steps:<ol><li>Choose from the following options:<ul><li>Select an ISO image from which to create a template.</li><li>Select the <uicontrol>All</uicontrol> check box to create a template
> -from each listed ISO image.</li><li>Select the <uicontrol>I want to use a specific file</uicontrol> check
> -box to specify a path to the ISO image.</li></ul></li><li>Click <uicontrol>Create</uicontrol>.</li></ol></p>
> - </csbody>
> - </cshelp>
> -</cshelp>
> -<?Pub *0000004376?>
> +<?xml version="1.0" encoding="UTF-8"?>
> +<!--Arbortext, Inc., 1988-2011, v.4002-->
> +<!DOCTYPE cshelp PUBLIC "-//IBM//DTD DITA CSHelp//EN"
> + "..\dtd\cshelp.dtd">
> +<?Pub Sty _display FontColor="red"?>
> +<?Pub Inc?>
> +<!--This DITA specialized document type is not supported by the Authoring Tools development team.
> +For support please see:
> +https://w3.opensource.ibm.com/projects/dita-cshelp/-->
> +<cshelp id="kimhtempl" xml:lang="en-us">
> +<title>Templates</title>
> +<shortdesc>The <wintitle>Templates</wintitle> page shows the defined
> +virtual machine templates that can be used to create KVM guests.</shortdesc>
> +<csbody>
> +<p>For each template, the following information is displayed:<dl>
> +<dlentry>
> +<dt>OS</dt>
> +<dd>Name of the operating system or distribution.</dd>
> +</dlentry><dlentry>
> +<dt>Version</dt>
> +<dd>Version of the operating system or distribution.</dd>
> +</dlentry><dlentry>
> +<dt>CPUs</dt>
> +<dd>Number of processors that are defined for the template.</dd>
> +</dlentry><dlentry>
> +<dt>Memory</dt>
> +<dd>Amount of random access memory to be allocated, in MB.</dd>
> +</dlentry></dl></p>
> +<p>The following actions can be selected for each template:<ul>
> +<li>Select <uicontrol>Edit</uicontrol> to edit the template.</li>
> +<li>Select <uicontrol>Delete</uicontrol> to delete the template.</li>
> +</ul>To add a template, click the <uicontrol>plus (+)</uicontrol> icon
> +in the upper right of the display.</p>
> +</csbody>
> +<cshelp id="kimhedittempl" xml:lang="en-us">
> +<title>Edit template</title>
> +<shortdesc>Edit an existing template.</shortdesc>
> +<csbody>
> +<p>For each template, the following information is displayed: <dl>
> +<dlentry>
> +<dt>Name</dt>
> +<dd>Name of the template.</dd>
> +</dlentry><dlentry>
> +<dt>Vendor</dt>
> +<dd>The name of the company that created the operating system or distribution
> +that the template is configured to use.</dd>
> +</dlentry><dlentry>
> +<dt>Version</dt>
> +<dd>The version of the operating system or distribution that the template
> +is configured to use.</dd>
> +</dlentry><dlentry>
> +<dt>CPU number</dt>
> +<dd>Number of processors that are defined for the template.</dd>
> +</dlentry><dlentry>
> +<dt>Memory</dt>
> +<dd>Amount of memory in MB to be allocated to the virtual machine.</dd>
> +</dlentry><dlentry>
> +<dt>Disk</dt>
> +<dd rev="rev1">Disk size in GB.</dd>
> +</dlentry><dlentry>
> +<dt>CDROM</dt>
> +<dd>File path to the location of the template.</dd>
File path to the ISO file used to install the KVM guest.
> +</dlentry><dlentry>
> +<dt>Storage pool</dt>
> +<dd>Specific storage pool or the default storage pool.</dd>
> +</dlentry><dlentry>
> +<dt>Network</dt>
> +<dd rev="rev1">Default network.</dd>
Represent the network interfaces available to the KVM guest
The user can select multiple networks
> +</dlentry></dl><?Pub Caret 427?> Fields that are not disabled can
> +be edited. After you edit a field, click <uicontrol>Save</uicontrol>. </p>
> +</csbody>
> +</cshelp>
> +<cshelp id="kimhaddtempl">
> +<title>Add template</title>
> +<shortdesc>Add a template from source media.</shortdesc>
> +<csbody>
> +<p>Select the location of the source media from the following options:<dl>
> +<dlentry>
> +<dt>Local ISO image</dt>
> +<dd>Select to scan storage pools for installation ISO images available
> +on the system.</dd>
> +</dlentry><dlentry>
> +<dt>Remote ISO image</dt>
> +<dd>Select to specify a remote location for an installation ISO image.</dd>
> +</dlentry></dl></p>
> +</csbody>
> +</cshelp>
> +<cshelp id="kimhaddloct">
> +<title>Add template - local ISO image</title>
> +<shortdesc>Add a template from a local ISO image.</shortdesc>
> +<csbody>
> +<p>The ISO images available on the system are displayed.<dl><dlentry>
> +<dt>OS</dt>
> +<dd>Name of the operating system or distribution.</dd>
> +</dlentry><dlentry>
> +<dt>Version</dt>
> +<dd>Version of the operating system or distribution.</dd>
> +</dlentry><dlentry>
> +<dt>Size</dt>
> +<dd>Size of the ISO image.</dd>
> +</dlentry></dl></p>
> +<p>To create a template from an ISO image, choose from the following
> +options:<ul>
> +<li>Select an ISO image from which to create a template, then click <uicontrol>Create
> +Templates from Selected ISO</uicontrol>.</li>
> +<li>Select <uicontrol>All</uicontrol> to create a template from each
> + listed ISO image, then click <uicontrol>Create Templates from Selected
> +ISO</uicontrol>.</li>
> +<li rev="rev1">If the ISO image that you want to use does not appear
> +in the scan results, you can select from the following options:<ul>
> +<li>Select <uicontrol>I want to use a specific ISO file</uicontrol> to
> +specify a path to the ISO image.</li>
> +<li>Click <uicontrol>Search more ISOs</uicontrol> to search for more
> +ISO images.</li>
> +</ul></li>
> +</ul></p>
> +</csbody>
> +</cshelp>
> +</cshelp>
> +<?Pub *0000004366?>
More information about the Kimchi-devel
mailing list