[Kimchi-devel] [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
Lucio Correia
luciojhc at linux.vnet.ibm.com
Mon Feb 8 17:49:38 UTC 2016
Hi Peter,
Please use V2, V3 and so on when sending updated versions of patches
already sent, including the list of changes from the prior version.
I have some comments below.
On 08-02-2016 13:03, peterpnns at gmail.com wrote:
> From: peterpennings <peterpnns at gmail.com>
>
> This commit adds the new UI changes for network bridges and enables OVS bridges that where temporary hidden
>
> Signed-off-by: peterpennings <peterpnns at gmail.com>
> ---
> netinfo.py | 3 +-
> ui/js/src/kimchi.network.js | 2 +
> ui/js/src/kimchi.network_add_main.js | 159 +++++++++++++++++++++--------------
> ui/pages/network-add.html.tmpl | 5 +-
> 4 files changed, 103 insertions(+), 66 deletions(-)
>
> diff --git a/netinfo.py b/netinfo.py
> index 2d83466..c00f603 100644
> --- a/netinfo.py
> +++ b/netinfo.py
> @@ -221,8 +221,7 @@ def is_bare_nic(iface):
> # a slave of bond.
> # The bridge will not be exposed when all it's port are tap.
> def all_favored_interfaces():
> - return list(set(aggregated_bridges() + bare_nics() + bondings()) -
> - set(ovs_bridges()))
> + return aggregated_bridges() + bare_nics() + bondings()
>
>
> def get_interface_type(iface):
> diff --git a/ui/js/src/kimchi.network.js b/ui/js/src/kimchi.network.js
> index 923aeb9..96c3fea 100644
> --- a/ui/js/src/kimchi.network.js
> +++ b/ui/js/src/kimchi.network.js
> @@ -17,6 +17,8 @@
> */
>
> kimchi.NETWORK_TYPE_MACVTAP = "macvtap";
> +kimchi.NETWORK_TYPE_BRIDGED = "bridge";
> +
>
> kimchi.initNetwork = function() {
> if(wok.tabMode['network'] === 'admin') {
> diff --git a/ui/js/src/kimchi.network_add_main.js b/ui/js/src/kimchi.network_add_main.js
> index 76d436f..33b4946 100644
> --- a/ui/js/src/kimchi.network_add_main.js
> +++ b/ui/js/src/kimchi.network_add_main.js
> @@ -31,20 +31,20 @@ kimchi.startNetworkCreation = function() {
> var network = kimchi.getNetworkDialogValues();
> var data = {
> name : network.name,
> - connection: network.type
> + connection: network.type,
> + interface: network.interface,
> + vlan_id: network.vlan_id
> };
> - if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
> - data.connection = "macvtap";
> - data.interface = network.interface;
> - if ($("#enableVlan").prop("checked")) {
> - data.vlan_id = network.vlan_id;
> - if (!(data.vlan_id >=1 && data.vlan_id <= 4094)) {
> - wok.message.error.code('KCHNET6001E');
> - errorCallback();
> - return;
> - }
> +
> + if (network.type === kimchi.NETWORK_TYPE_BRIDGED && $("#enableVlan").prop("checked")) {
> + data.vlan_id = network.vlan_id;
This line is not necessary, it is repetitive.
> + if (!(data.vlan_id >=1 && data.vlan_id <= 4094)) {
consequently this could be an && instead of another if
> + wok.message.error(i18n['KCHNET6001E'],'#alert-modal-container');
> + errorCallback();
> + return;
> }
> }
> +
> kimchi.createNetwork(data, function(result) {
> network.state = result.state === "active" ? "up" : "down";
> network.interface = result.interface ? result.interface : i18n["KCHNET6001M"];
> @@ -59,30 +59,8 @@ kimchi.startNetworkCreation = function() {
> };
>
> kimchi.openNetworkDialog = function(okCallback) {
> - kimchi.getInterfaces(function(result) {
> - var options = [];
> - $selectDestination = $('#networkDestinationID');
> - var nics = {};
> - var selectDestinationOptionHTML = '';
> - for (var i = 0; i < result.length; i++) {
> - options.push({label:result[i].name,value:result[i].name});
> - nics[result[i].name] = result[i];
> - selectDestinationOptionHTML += '<option value="'+ result[i].name + '">' + result[i].name + '</option>';
> - }
> - $selectDestination.append(selectDestinationOptionHTML);
> - $selectDestination.selectpicker();
> - onChange = function() {
> - if (result.length>0 && $selectDestination.val() !== "") {
> - $("#enableVlan").prop("disabled",false);
> - $("#networkVlanID").val("");
> - } else {
> - $("#enableVlan").prop("disabled",true);
> - }
> - };
> - $("#networkDestinationID").on("change", onChange);
> - kimchi.setDefaultNetworkType(result.length!==0);
> - onChange();
> - });
> + kimchi.loadInterfaces();
> +
> $("#networkFormOk").on("click", function() {
> $("#networkFormOk").button("disable");
> $("#networkName").prop("readonly", "readonly");
> @@ -98,33 +76,12 @@ kimchi.openNetworkDialog = function(okCallback) {
> });
> };
>
> -kimchi.enableBridgeOptions = function(enable) {
> - $("#enableVlan").prop("checked", false);
> - $("#networkVlanID").val("");
> - if (enable) {
> - $('#bridgedContent').slideDown(300);
> - $('#enableVlan').prop("disabled", false);
> - $('#networkVlanID').prop("disabled", true);
> - } else {
> - $('#bridgedContent').slideUp(300);
> - $('#enableVlan').prop("disabled", true);
> - $('#networkVlanID').prop("disabled", true);
> - }
> -};
> -
> -
> kimchi.setDefaultNetworkType = function(isInterfaceAvail) {
> - $("#networkType").val('macvtap', isInterfaceAvail);
> - $("#networkType option:contains('bridged')").prop("disabled", !isInterfaceAvail);
> - $("#networkType").val('nat', !isInterfaceAvail);
> $("#networkType").selectpicker();
> if (!isInterfaceAvail) {
> kimchi.enableBridgeOptions(false);
> $("#networkBriDisabledLabel").removeClass('hidden');
> } else {
> - if (kimchi.capabilities && kimchi.capabilities.nm_running) {
> - wok.message.warn(i18n['KCHNET6001W'],'#alert-modal-container');
> - }
> $("#networkBriDisabledLabel").remove();
> }
> };
> @@ -135,24 +92,44 @@ kimchi.getNetworkDialogValues = function() {
> type : $("#networkType").val()
> };
> if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
> - network.interface = $("#networkDestinationID").val();
> - network.vlan_id = parseInt($("#networkVlanID").val());
> + network.interface = $("#networkDestinationID").find(':selected').data('type');
> + }
> + if (network.type === kimchi.NETWORK_TYPE_BRIDGED) {
> + network.interface = $("#networkDestinationID").find(':selected').data('type');
I believe network.interface should be the name of interface, not type.
I got this error testing your patch:
KCHNET0020E: Failed to activate interface bridge: Cannot find device
"bridge" .
> + if ($("#enableVlan").prop("checked") && (network.interface === 'nic' || network.interface === 'bonding')) {
> + network.vlan_id = parseInt($("#networkVlanID").val());
> + }
> }
> return network;
> };
>
> kimchi.setupNetworkFormEvent = function() {
> + if (kimchi.capabilities && kimchi.capabilities.nm_running) {
> + wok.message.warn(i18n['KCHNET6001W'],'#alert-modal-container');
> + }
> $('#bridgedContent').hide();
> $("#networkName").on("keyup", function(event) {
> $("#networkName").toggleClass("invalid-field", !$("#networkName").val().match(/^[^\"\/]+$/));
> kimchi.updateNetworkFormButton();
> });
> - $('#networkType').on('change', function() {
> - var selectedType = $(this).val();
> +
> + $('#networkType, #networkDestinationID').on('change', function() {
> + var selectedType = $("#networkType").val();
> + var selectedDestination = $("#networkDestinationID").find(':selected').data('type');
> if(selectedType == 'isolated' || selectedType == 'nat') {
> kimchi.enableBridgeOptions(false);
> - } else if (selectedType == 'macvtap') {
> - kimchi.enableBridgeOptions(true);
> + } else {
> + kimchi.enableBridgeOptions(true, selectedType, selectedDestination);
> + }
> +
> + });
> +
> + $('#networkType').on('change', function() {
> + var selectedType = $("#networkType").val();
> + if(selectedType === kimchi.NETWORK_TYPE_MACVTAP) {
> + kimchi.loadInterfaces(new Array("nic", "bonding"));
> + } else {
> + kimchi.loadInterfaces();
> }
> });
> };
> @@ -164,3 +141,61 @@ kimchi.updateNetworkFormButton = function() {
> $("#networkFormOk").button("enable");
> }
> };
> +
> +kimchi.enableBridgeOptions = function(enable, networkType, networkDestination) {
> + $("#enableVlan").prop("checked", false);
> + $("#networkVlanID").val("");
> + $('#vlan').hide();
> + if (enable) {
> + $('#bridgedContent').slideDown(300);
> + $('#enableVlan').prop("disabled", false);
> + $('#networkVlanID').prop("disabled", true);
> + if (networkType === kimchi.NETWORK_TYPE_BRIDGED && (networkDestination === 'nic' || networkDestination === 'bonding')) {
> + $('#vlan').show();
> + }
> + } else {
> + $('#bridgedContent').slideUp(300);
> + $('#enableVlan').prop("disabled", true);
> + $('#networkVlanID').prop("disabled", true);
> + };
> +
> +};
> +
> +kimchi.loadInterfaces = function(interfaceFilterArray) {
> + kimchi.getInterfaces(function(result) {
> +
> + var options = [];
> + $selectDestination = $('#networkDestinationID');
> + var nics = {};
> + $('#networkDestinationID').find('option').remove();
> + var selectDestinationOptionHTML = '';
> + for (var i = 0; i < result.length; i++) {
> + if (typeof interfaceFilterArray === 'undefined') {
> + options.push({label:result[i].name,value:result[i].name});
> + nics[result[i].name] = result[i];
> + selectDestinationOptionHTML += '<option data-type="'+ result[i].type +'" value="'+ result[i].name + '">' + result[i].name + '</option>';
> + } else {
> + for (var k = 0; k < interfaceFilterArray.length; k++) {
> + if (result[i].type == interfaceFilterArray[k]) {
> + options.push({label:result[i].name,value:result[i].name});
> + nics[result[i].name] = result[i];
> + selectDestinationOptionHTML += '<option data-type="'+ result[i].type +'" value="'+ result[i].name + '">' + result[i].name + '</option>';
> + }
> + }
> + }
> +
> + }
> + $selectDestination.append(selectDestinationOptionHTML);
> + $('#networkDestinationID').selectpicker('refresh');
> + onChange = function() {
> + if (result.length>0 && $selectDestination.val() !== "") {
> + $("#enableVlan").prop("disabled",false);
> + $("#networkVlanID").val("");
> + } else {
> + $("#enableVlan").prop("disabled",true);
> + }
> + };
> + kimchi.setDefaultNetworkType(result.length!==0);
> + onChange();
> + });
> +};
> \ No newline at end of file
> diff --git a/ui/pages/network-add.html.tmpl b/ui/pages/network-add.html.tmpl
> index 7158b75..6bd2acf 100644
> --- a/ui/pages/network-add.html.tmpl
> +++ b/ui/pages/network-add.html.tmpl
> @@ -40,7 +40,8 @@
> <select id="networkType" class="selectpicker col-md-12 col-lg-12">
> <option value="isolated">$_("Isolated: no external network connection")</option>
> <option value="nat">$_("NAT: outbound physical network connection only")</option>
> - <option value="macvtap">$_("Bridged: Virtual machines are connected to physical network directly")</option>
> + <option value="macvtap">$_("Macvtap: Virtual machines are connected to physical network directly")</option>
> + <option value="bridge">$_("Bridged: Virtual machines are connected through a network bridge")</option>
> </select>
> </div>
> <div id="networkBriDisabledLabel" class="form-group hidden">
> @@ -52,7 +53,7 @@
> <select id="networkDestinationID" class="selectpicker col-md-12 col-lg-12">
> </select>
> </div>
> - <div class="form-group">
> + <div class="form-group" id="vlan">
> <input id="enableVlan" class="wok-checkbox" type="checkbox" value="" />
> <label for="enableVlan" id="labelEnableVlan">$_("Enable VLAN") </label>
> <div id="vlan-enabled">
>
--
Lucio Correia
Software Engineer
IBM LTC Brazil
More information about the Kimchi-devel
mailing list