[Kimchi-devel] [PATCH] [Kimchi] s390x specific changes to support storage path and storage pool disk.
archus at linux.vnet.ibm.com
archus at linux.vnet.ibm.com
Fri Oct 21 05:18:21 UTC 2016
From: Archana Singh <archus at linux.vnet.ibm.com>
1) Added s390x specific error message for storage pool and network.
2) As on s390x, default is storage path, but if pool explicitly specified in
template_s390x.conf it takes preference. So added code to ensure that
if storage pool explicitly specified in file conf then check for default
storage pool gets called.
3) Code changes in tmpl default creation which ensure that on s390x, default
disk is path but if conf file has explicitly pool specified then defult disk
is the sepecified pool. And also ensures that disk is either pool or path
and not both.
4) Code changes in vmtemplate, to ensure that on s390x either a path disk
or a pool disk can be added to template. And if disk to add does not have
both path nad pool then tmpl default storage is used.
5) Added template conf file specific to s390x.
Signed-off-by: Archana Singh <archus at linux.vnet.ibm.com>
---
IBM-license-blacklist | 1 +
model/networks.py | 7 +++++++
model/storagepools.py | 13 +++++++++++--
osinfo.py | 36 ++++++++++++++++++++++++++++++++--
template_s390x.conf | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++
vmtemplate.py | 33 +++++++++++++++++++++++---------
6 files changed, 130 insertions(+), 13 deletions(-)
create mode 100644 template_s390x.conf
diff --git a/IBM-license-blacklist b/IBM-license-blacklist
index 78fd2cb..a0d1407 100644
--- a/IBM-license-blacklist
+++ b/IBM-license-blacklist
@@ -27,6 +27,7 @@ po/Makevars
po/POTFILES.in
po/kimchi.pot
template.conf
+template_s390x.conf
ui/config/tab-ext.xml
ui/images/.*.svg
ui/pages/help/dita-help.xsl
diff --git a/model/networks.py b/model/networks.py
index be4eec2..57ff487 100644
--- a/model/networks.py
+++ b/model/networks.py
@@ -35,6 +35,7 @@ from wok.plugins.kimchi import network as knetwork
from wok.plugins.kimchi.config import kimchiPaths
from wok.plugins.kimchi.model.config import CapabilitiesModel
from wok.plugins.kimchi.osinfo import defaults as tmpl_defaults
+from wok.plugins.kimchi.utils import is_s390x
from wok.plugins.kimchi.xmlutils.interface import get_iface_xml
from wok.plugins.kimchi.xmlutils.network import create_linux_bridge_xml
from wok.plugins.kimchi.xmlutils.network import create_vlan_tagged_bridge_xml
@@ -64,6 +65,12 @@ class NetworksModel(object):
"active. Please, check the configuration in "
"%s/template.conf to ensure it lists only valid "
"networks." % (net_name, kimchiPaths.sysconf_dir))
+ if is_s390x():
+ error_msg = ("Network %s does not exist or is not "
+ "active. Please, check the "
+ "configuration in %s/template_s390x.conf "
+ "to ensure it lists only valid "
+ "networks." % (net_name, kimchiPaths.sysconf_dir))
try:
net = conn.networkLookupByName(net_name)
diff --git a/model/storagepools.py b/model/storagepools.py
index 5942b31..a8a2356 100644
--- a/model/storagepools.py
+++ b/model/storagepools.py
@@ -73,7 +73,9 @@ class StoragePoolsModel(object):
def _check_default_pools(self):
pools = {}
- if is_s390x():
+ # Don't create default pool if it's not
+ # explicitly specified in template_s390x.conf
+ if is_s390x() and 'pool' not in tmpl_defaults['disks'][0]:
return
default_pool = tmpl_defaults['disks'][0]['pool']['name']
@@ -91,7 +93,14 @@ class StoragePoolsModel(object):
error_msg = ("Storage pool %s does not exist or is not "
"active. Please, check the configuration in "
"%s/template.conf to ensure it lists only valid "
- "networks." % (pool_name, kimchiPaths.sysconf_dir))
+ "storage." % (pool_name, kimchiPaths.sysconf_dir))
+ if is_s390x:
+ error_msg = ("Network %s does not exist or is not "
+ "active. Please, check the "
+ "configuration in %s/template_s390x.conf "
+ "to ensure it lists only valid "
+ "storage." % (pool_name, kimchiPaths.sysconf_dir))
+
try:
pool = conn.storagePoolLookupByName(pool_name)
except libvirt.libvirtError, e:
diff --git a/osinfo.py b/osinfo.py
index c51d6e0..4f0e1fa 100644
--- a/osinfo.py
+++ b/osinfo.py
@@ -27,9 +27,9 @@ from configobj import ConfigObj
from distutils.version import LooseVersion
from wok.config import PluginPaths
+from wok.exception import InvalidParameter
from wok.plugins.kimchi.config import kimchiPaths
-
SUPPORTED_ARCHS = {'x86': ('i386', 'i686', 'x86_64'),
'power': ('ppc', 'ppc64'),
'ppc64le': ('ppc64le'),
@@ -129,7 +129,8 @@ def _get_default_template_mem():
def _get_tmpl_defaults():
"""
ConfigObj returns a dict like below when no changes were made in the
- template configuration file (template.conf)
+ template configuration file (template.conf and in case of s390x its
+ template_s390x.conf)
{'main': {}, 'memory': {}, 'storage': {'disk.0': {}}, 'processor': {},
'graphics': {}}
@@ -184,6 +185,37 @@ def _get_tmpl_defaults():
config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf')
config = ConfigObj(config_file)
+ # File configuration takes preference.
+ # In s390x, file configuration can have storage pool or path.
+ # Default configuration for s390x is storage path.
+ # In case file conf has storage pool then storage pool takes preference.
+ # When conf file has explicitly storage pool: "defaults" should
+ # have storage pool and default configured path should be removed,
+ # as either storage can be path or pool, cannot be both.
+ # When conf file does not explicity storage pool or have explicitly
+ # storage path: "default" should have storage path only and cannot
+ # have default pool.
+ #
+ # Check file conf has storage configured.
+ if is_on_s390x and config.get('storage').get('disk.0'):
+ # remove storage from default_config as file configuration takes
+ # preference.
+ default_config.pop('storage')
+
+ # Get storage configuration present in conf file
+ config_pool = config.get('storage').get('disk.0').get('pool')
+ config_path = config.get('storage').get('disk.0').get('path')
+
+ # If storage configured in conf file then it should have either
+ # pool or path.
+ if not config_pool and not config_path:
+ raise InvalidParameter('KCHTMPL0040E')
+
+ # On s390x if config file has both path and pool uncommented
+ # then path should take preference.
+ if config_pool and config_path:
+ config.get('storage').get('disk.0').pop('pool')
+
# Merge default configuration with file configuration
default_config.merge(config)
diff --git a/template_s390x.conf b/template_s390x.conf
new file mode 100644
index 0000000..c4598f1
--- /dev/null
+++ b/template_s390x.conf
@@ -0,0 +1,53 @@
+#
+# Configuration file for Kimchi Templates
+#
+
+[main]
+# List of networks separated by comma
+# Represents the virtual network interfaces to be assigned to guest
+#networks = default,
+
+[memory]
+# Memory in MB
+# current = 1024
+
+# Maximum value of memory to be assigned to guest in MB
+# maxmemory = 1024
+
+[storage]
+
+# Specify multiple [[disk.X]] sub-sections to add multiples disks to guest
+# Each disk files will be created in respective storage pool set
+[[disk.0]]
+# Disk size in GB
+#size = 10
+
+# Disk format
+#format = qcow2
+
+# Storage pool used to handle the guest disk
+#pool = default
+
+[graphics]
+# Graphics type
+# Valid options: vnc | spice
+#type = vnc
+
+# The network which the vnc/spice server listens on
+#listen = 127.0.0.1
+
+[processor]
+# Number of vcpus
+# When specifying CPU topology, make sure maxvcpus value is equal to the
+# product of sockets, cores, and threads.
+#vcpus = 1
+#maxvcpus = 1
+
+# Number of sockets (not set by default)
+#sockets =
+
+# Number of cores per socket (not set by default)
+#cores =
+
+# Number of threads per core (not set by default)
+#threads =
diff --git a/vmtemplate.py b/vmtemplate.py
index c3390fe..b249873 100644
--- a/vmtemplate.py
+++ b/vmtemplate.py
@@ -106,14 +106,25 @@ class VMTemplate(object):
for index, disk in enumerate(disks):
disk_info = dict(default_disk)
- # on s390x/s390 either pool or path should be present in
- # default disk.
- if is_s390x() and 'pool' not in default_disk and \
- 'path' not in default_disk:
- raise InvalidParameter('KCHTMPL0040E')
- # On s390x/s390 pool is optional attribute for disk.
- pool = disk.get('pool', default_disk.get('pool'))
+ if is_s390x():
+ # Default disk should have either pool or path.
+ if 'pool' not in default_disk and 'path' not in default_disk:
+ raise InvalidParameter('KCHTMPL0040E')
+
+ # Each disk should have either pool or path.
+ # if not then use "default_disk" configuration.
+ pool = disk.get('pool')
+ path = disk.get('path')
+ if not path and not pool:
+ # If default disk is path then set disk with default path
+ if default_disk.get('path'):
+ path = default_disk.get('path')
+ # If default disk is pool then set disk with default pool
+ if default_disk.get('pool'):
+ pool = default_disk.get('pool')
+ else:
+ pool = disk.get('pool', default_disk.get('pool'))
if pool:
pool_type = self._get_storage_type(pool['name'])
@@ -148,8 +159,12 @@ class VMTemplate(object):
disk_info['index'] = disk_info.get('index', index)
self.info['disks'][index] = disk_info
elif is_s390x():
- # For now support 'path' only on s390x
- path = disk.get('path', default_disk.get('path'))
+ # This check is required where 'path' disk
+ # has to be added and hence default pool
+ # has to be removed during template update.
+ if 'pool' in disk_info:
+ del disk_info['pool']
+
disk_info.update(disk)
keys = sorted(disk_info.keys())
if ((keys != sorted(basic_path_disk)) and
--
2.7.4
More information about the Kimchi-devel
mailing list