[Kimchi-devel] [PATCH V1] [Kimchi] Issue #992 : Create template on s390x without libvirt storage.
archus at linux.vnet.ibm.com
archus at linux.vnet.ibm.com
Tue Sep 6 15:43:02 UTC 2016
From: Harshal Patil <harshalp at linux.vnet.ibm.com>
V1:
This patch adds support for creating templates on s390x arch
without using libvirt related storage calls
V2:
Review comments
V3:
Review comments and refactoring
V4:
Rebase patch to latest upstream.
Signed-off-by: Harshal Patil <harshalp at linux.vnet.ibm.com>
---
docs/API.md | 2 +
i18n.py | 3 ++
model/storagepools.py | 13 ++++--
model/storagevolumes.py | 1 -
model/templates.py | 27 +++++++++---
model/vms.py | 9 +++-
osinfo.py | 35 +++++++++++++--
utils.py | 34 +++++++++++++++
vmtemplate.py | 111 +++++++++++++++++++++++++++++++-----------------
9 files changed, 179 insertions(+), 56 deletions(-)
diff --git a/docs/API.md b/docs/API.md
index 1c20466..cff623e 100644
--- a/docs/API.md
+++ b/docs/API.md
@@ -438,6 +438,7 @@ A interface represents available network interface on VM.
over current will be used exclusively for memory hotplug
* cdrom: A volume name or URI to an ISO image
* storagepool: URI of the storagepool where template allocates vm storage.
+ * path *(optional and only valid for s390x architecture)*: Storage path to store virtual disks without libvirt.
* networks *(optional)*: list of networks will be assigned to the new VM.
* interfaces *(optional)*: list of host network interfaces will be assigned to the new VM. Only applicable for s390x or s390 architecture.
* type: Type of host network interface. Type should be 'macvtap' for host network interface (Ethernet, Bond, VLAN) to be connected as direct MacVTap; or 'ovs' for openvswitch host network interface to be connected as virtual switch to a VM.
@@ -504,6 +505,7 @@ A interface represents available network interface on VM.
* format: Format of the image. Valid formats: qcow, qcow2, qed, raw, vmdk, vpc.
* pool: Storage pool information
* name: URI of the storagepool where template allocates vm disk.
+ * path *(optional and only valid for s390x architecture)*: Either pool or path to store the virtual disks should be specified.
* graphics *(optional)*: A dict of graphics paramenters of this template
* type: The type of graphics. It can be VNC or spice or None.
* vnc: Graphical display using the Virtual Network
diff --git a/i18n.py b/i18n.py
index 47c829e..b6533d4 100644
--- a/i18n.py
+++ b/i18n.py
@@ -203,6 +203,9 @@ messages = {
"KCHTMPL0037E": _("Interfaces should be list of interfaces. Each interface should have name, type and mode(optional, only applicable for interfcae type 'macvtap'."),
"KCHTMPL0038E": _("Interface expects an object with parameters: 'name', 'type' and 'mode'. Name should be name of host network interface (Ethernet, Bond, VLAN) for type 'macvtap' or the name of host openvswitch bridge interface for type 'ovs'. Mode (optional) is only applicable for interface type 'macvtap' to indicates whether packets will be delivered directly to target device (bridge) or to the external bridge (vepa-capable bridge)."),
"KCHTMPL0039E": _("Interfaces parameter only supported on s390x or s390 architecture."),
+ "KCHTMPL0040E": _("Storage without libvirt pool is not supported on this architecture"),
+ "KCHTMPL0041E": _("Error while creating the virtual disk for the guest. Details: %(err)s"),
+ "KCHTMPL0042E": _("When setting template disks without libvirt, following parameters are required: 'index', 'format', 'path', 'size'"),
"KCHPOOL0001E": _("Storage pool %(name)s already exists"),
"KCHPOOL0002E": _("Storage pool %(name)s does not exist"),
diff --git a/model/storagepools.py b/model/storagepools.py
index af92ec9..5942b31 100644
--- a/model/storagepools.py
+++ b/model/storagepools.py
@@ -33,7 +33,7 @@ from wok.plugins.kimchi.model.host import DeviceModel
from wok.plugins.kimchi.model.libvirtstoragepool import StoragePoolDef
from wok.plugins.kimchi.osinfo import defaults as tmpl_defaults
from wok.plugins.kimchi.scan import Scanner
-from wok.plugins.kimchi.utils import pool_name_from_uri
+from wok.plugins.kimchi.utils import pool_name_from_uri, is_s390x
ISO_POOL_NAME = u'kimchi_isos'
@@ -57,6 +57,7 @@ STORAGE_SOURCES = {'netfs': {'addr': '/pool/source/host/@name',
class StoragePoolsModel(object):
+
def __init__(self, **kargs):
self.conn = kargs['conn']
self.objstore = kargs['objstore']
@@ -72,6 +73,9 @@ class StoragePoolsModel(object):
def _check_default_pools(self):
pools = {}
+ if is_s390x():
+ return
+
default_pool = tmpl_defaults['disks'][0]['pool']['name']
default_pool = default_pool.split('/')[-1]
@@ -437,9 +441,10 @@ class StoragePoolModel(object):
for tmpl in templates:
t_info = session.get('template', tmpl)
for disk in t_info['disks']:
- t_pool = disk['pool']['name']
- if pool_name_from_uri(t_pool) == pool_name:
- return True
+ if 'pool' in disk:
+ t_pool = disk['pool']['name']
+ if pool_name_from_uri(t_pool) == pool_name:
+ return True
return False
def deactivate(self, name):
diff --git a/model/storagevolumes.py b/model/storagevolumes.py
index a6ce97b..2d68027 100644
--- a/model/storagevolumes.py
+++ b/model/storagevolumes.py
@@ -43,7 +43,6 @@ from wok.plugins.kimchi.model.diskutils import get_disk_used_by
from wok.plugins.kimchi.model.storagepools import StoragePoolModel
from wok.plugins.kimchi.utils import get_next_clone_name
-
VOLUME_TYPE_MAP = {0: 'file',
1: 'block',
2: 'directory',
diff --git a/model/templates.py b/model/templates.py
index 04e6626..a5d17af 100644
--- a/model/templates.py
+++ b/model/templates.py
@@ -28,13 +28,15 @@ import urlparse
from wok.exception import InvalidOperation, InvalidParameter
from wok.exception import NotFoundError, OperationFailed
-from wok.utils import probe_file_permission_as_user, run_setfacl_set_attr
+from wok.utils import probe_file_permission_as_user
+from wok.utils import run_setfacl_set_attr
from wok.xmlutils.utils import xpath_get_text
from wok.plugins.kimchi.config import get_kimchi_version
from wok.plugins.kimchi.kvmusertests import UserTests
from wok.plugins.kimchi.model.cpuinfo import CPUInfoModel
from wok.plugins.kimchi.utils import is_libvirtd_up, pool_name_from_uri
+from wok.plugins.kimchi.utils import create_disk_image
from wok.plugins.kimchi.vmtemplate import VMTemplate
ISO_TYPE = "ISO 9660 CD-ROM"
@@ -417,15 +419,26 @@ class LibvirtVMTemplate(VMTemplate):
def fork_vm_storage(self, vm_uuid):
# Provision storages:
- vol_list = self.to_volume_list(vm_uuid)
+ disk_and_vol_list = self.to_volume_list(vm_uuid)
try:
- for v in vol_list:
- pool = self._get_storage_pool(v['pool'])
- # outgoing text to libvirt, encode('utf-8')
- pool.createXML(v['xml'].encode('utf-8'), 0)
+ for v in disk_and_vol_list:
+ if v['pool'] is not None:
+ pool = self._get_storage_pool(v['pool'])
+ # outgoing text to libvirt, encode('utf-8')
+ pool.createXML(v['xml'].encode('utf-8'), 0)
+ else:
+ capacity = v['capacity']
+ format_type = v['format']
+ path = v['path']
+ create_disk_image(
+ format_type=format_type,
+ path=path,
+ capacity=capacity)
+
except libvirt.libvirtError as e:
raise OperationFailed("KCHVMSTOR0008E", {'error': e.message})
- return vol_list
+
+ return disk_and_vol_list
def set_cpu_info(self):
# undefined topology: consider these values to calculate maxvcpus
diff --git a/model/vms.py b/model/vms.py
index b889166..6a9b1d1 100644
--- a/model/vms.py
+++ b/model/vms.py
@@ -61,7 +61,7 @@ from wok.plugins.kimchi.model.utils import remove_metadata_node
from wok.plugins.kimchi.model.utils import set_metadata_node
from wok.plugins.kimchi.osinfo import defaults, MEM_DEV_SLOTS
from wok.plugins.kimchi.screenshot import VMScreenshot
-from wok.plugins.kimchi.utils import get_next_clone_name
+from wok.plugins.kimchi.utils import get_next_clone_name, is_s390x
from wok.plugins.kimchi.utils import template_name_from_uri
from wok.plugins.kimchi.xmlutils.bootorder import get_bootorder_node
from wok.plugins.kimchi.xmlutils.bootorder import get_bootmenu_node
@@ -1405,6 +1405,13 @@ class VMModel(object):
except libvirt.libvirtError as e:
wok_log.error('Unable to get storage volume by path: %s' %
e.message)
+ try:
+ if is_s390x() and os.path.exists(path):
+ os.remove(path)
+ except Exception as e:
+ wok_log.error('Unable to delete storage path: %s' %
+ e.message)
+
except Exception as e:
raise OperationFailed('KCHVOL0017E', {'err': e.message})
diff --git a/osinfo.py b/osinfo.py
index 3e56d97..8ec9480 100644
--- a/osinfo.py
+++ b/osinfo.py
@@ -159,6 +159,12 @@ def _get_tmpl_defaults():
'maxmemory': _get_default_template_mem()}
tmpl_defaults['storage']['disk.0'] = {'size': 10, 'format': 'qcow2',
'pool': 'default'}
+ is_on_s390x = True if _get_arch() == 's390x' else False
+
+ if is_on_s390x:
+ tmpl_defaults['storage']['disk.0']['path'] = '/var/lib/libvirt/images/'
+ del tmpl_defaults['storage']['disk.0']['pool']
+
tmpl_defaults['processor']['vcpus'] = 1
tmpl_defaults['processor']['maxvcpus'] = 1
tmpl_defaults['graphics'] = {'type': 'vnc', 'listen': '127.0.0.1'}
@@ -166,7 +172,12 @@ def _get_tmpl_defaults():
default_config = ConfigObj(tmpl_defaults)
# Load template configuration file
- config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf')
+ if is_on_s390x:
+ config_file = os.path.join(
+ kimchiPaths.sysconf_dir,
+ 'template_s390x.conf')
+ else:
+ config_file = os.path.join(kimchiPaths.sysconf_dir, 'template.conf')
config = ConfigObj(config_file)
# Merge default configuration with file configuration
@@ -187,11 +198,27 @@ def _get_tmpl_defaults():
# Parse storage section to get disks values
storage_section = default_config.pop('storage')
defaults['disks'] = []
- for disk in storage_section.keys():
+
+ for index, disk in enumerate(storage_section.keys()):
data = storage_section[disk]
data['index'] = int(disk.split('.')[1])
- data['pool'] = {"name": '/plugins/kimchi/storagepools/' +
- storage_section[disk].pop('pool')}
+ # Right now 'Path' is only supported on s390x
+ if storage_section[disk].get('path') and is_on_s390x:
+ data['path'] = storage_section[disk].pop('path')
+ if 'size' not in storage_section[disk]:
+ data['size'] = tmpl_defaults['storage']['disk.0']['size']
+ else:
+ data['size'] = storage_section[disk].pop('size')
+
+ if 'format' not in storage_section[disk]:
+ data['format'] = tmpl_defaults['storage']['disk.0']['format']
+ else:
+ data['format'] = storage_section[disk].pop('format')
+ else:
+ storage_section[disk].get('pool')
+ data['pool'] = {"name": '/plugins/kimchi/storagepools/' +
+ storage_section[disk].pop('pool')}
+
defaults['disks'].append(data)
# Parse processor section to get vcpus and cpu_topology values
diff --git a/utils.py b/utils.py
index 26d3cf6..7129bfe 100644
--- a/utils.py
+++ b/utils.py
@@ -24,6 +24,7 @@ import platform
import re
import sqlite3
import time
+import os
import urllib2
from httplib import HTTPConnection, HTTPException
from urlparse import urlparse
@@ -31,6 +32,7 @@ from urlparse import urlparse
from wok.exception import InvalidParameter, OperationFailed
from wok.plugins.kimchi import config
from wok.plugins.kimchi.osinfo import get_template_default
+from wok.stringutils import encode_value
from wok.utils import run_command, wok_log
from wok.xmlutils.utils import xpath_get_text
@@ -272,3 +274,35 @@ def is_libvirtd_up():
output, error, rc = run_command(cmd, silent=True)
return True if output == 'active\n' else False
+
+
+def is_s390x():
+ """
+ Check if current arch is 's390x'
+ Returns:
+ """
+ if os.uname()[4] == 's390x':
+ return True
+
+ return False
+
+
+def create_disk_image(format_type, path, capacity):
+ """
+ Create a disk image for the Guest
+ Args:
+ format: Format of the storage. e.g. qcow2
+ path: Path where the virtual disk will be created
+ capacity: Capacity of the virtual disk in GBs
+
+ Returns:
+
+ """
+ out, err, rc = run_command(
+ ["/usr/bin/qemu-img", "create", "-f", format_type, "-o",
+ "preallocation=metadata", path, encode_value(capacity) + "G"])
+
+ if rc != 0:
+ raise OperationFailed("KCHTMPL0041E", {'err': err})
+
+ return
diff --git a/vmtemplate.py b/vmtemplate.py
index 07cebb9..20edbfb 100644
--- a/vmtemplate.py
+++ b/vmtemplate.py
@@ -31,7 +31,8 @@ from wok.exception import MissingParameter, OperationFailed
from wok.plugins.kimchi import imageinfo
from wok.plugins.kimchi import osinfo
from wok.plugins.kimchi.isoinfo import IsoImage
-from wok.plugins.kimchi.utils import check_url_path, pool_name_from_uri
+from wok.plugins.kimchi.utils import check_url_path, is_s390x
+from wok.plugins.kimchi.utils import pool_name_from_uri
from wok.plugins.kimchi.xmlutils.bootorder import get_bootorder_xml
from wok.plugins.kimchi.xmlutils.cpu import get_cpu_xml
from wok.plugins.kimchi.xmlutils.disk import get_disk_xml
@@ -42,6 +43,7 @@ from wok.plugins.kimchi.xmlutils.serial import get_serial_xml
class VMTemplate(object):
+
def __init__(self, args, scan=False, netboot=False):
"""
Construct a VM Template from a widely variable amount of information.
@@ -95,35 +97,55 @@ class VMTemplate(object):
disks = self.info.get('disks')
basic_disk = ['index', 'format', 'pool', 'size']
+ basic_path_disk = ['index', 'format', 'path', 'size']
ro_disk = ['index', 'format', 'pool', 'volume']
base_disk = ['index', 'base', 'pool', 'size', 'format']
for index, disk in enumerate(disks):
disk_info = dict(default_disk)
-
- pool = disk.get('pool', default_disk['pool'])
- pool_type = self._get_storage_type(pool['name'])
-
- if pool_type in ['iscsi', 'scsi']:
- disk_info = {'index': 0, 'format': 'raw', 'volume': None}
-
- disk_info.update(disk)
- pool_name = disk_info.get('pool', {}).get('name')
- if pool_name is None:
- raise MissingParameter('KCHTMPL0028E')
-
- keys = sorted(disk_info.keys())
- if ((keys != sorted(basic_disk)) and (keys != sorted(ro_disk)) and
- (keys != sorted(base_disk))):
- raise MissingParameter('KCHTMPL0028E')
-
- if pool_type in ['logical', 'iscsi', 'scsi']:
- if disk_info['format'] != 'raw':
- raise InvalidParameter('KCHTMPL0029E')
-
- disk_info['pool']['type'] = pool_type
- disk_info['index'] = disk_info.get('index', index)
- self.info['disks'][index] = disk_info
+ if disk.get('pool'):
+ pool = disk.get('pool', default_disk.get('pool'))
+ pool_type = self._get_storage_type(pool['name'])
+ if pool_type in ['iscsi', 'scsi']:
+ disk_info = {'index': 0, 'format': 'raw', 'volume': None}
+
+ # This check is required where 'path' disk
+ # exists and is replaced by 'pool' disk during
+ # template update
+ if 'path' in disk_info:
+ del disk_info['path']
+
+ disk_info.update(disk)
+ pool_name = disk_info.get('pool', {}).get('name')
+ if pool_name is None:
+ raise MissingParameter('KCHTMPL0028E')
+
+ keys = sorted(disk_info.keys())
+ if ((keys != sorted(basic_disk)) and
+ (keys != sorted(ro_disk)) and
+ (keys != sorted(base_disk)) and
+ (keys != sorted(basic_path_disk))):
+ raise MissingParameter('KCHTMPL0028E')
+
+ if pool_type in ['logical', 'iscsi', 'scsi']:
+ if disk_info['format'] != 'raw':
+ raise InvalidParameter('KCHTMPL0029E')
+
+ disk_info['pool']['type'] = pool_type
+ disk_info['index'] = disk_info.get('index', index)
+ self.info['disks'][index] = disk_info
+ elif is_s390x():
+ # For now support 'path' only on s390x
+ path = disk.get('path', default_disk['path'])
+ disk_info.update(disk)
+ keys = sorted(disk_info.keys())
+ if keys != sorted(basic_path_disk):
+ raise MissingParameter('KCHTMPL0042E')
+ disk_info['path'] = path
+ disk_info['index'] = disk_info.get('index', index)
+ self.info['disks'][index] = disk_info
+ else:
+ raise InvalidParameter('KCHTMPL0040E')
def _get_os_info(self, args, scan):
distro = version = 'unknown'
@@ -217,8 +239,9 @@ class VMTemplate(object):
params = dict(base_disk_params)
params['format'] = disk['format']
params['index'] = index
- params.update(locals().get('%s_disk_params' %
- disk['pool']['type'], {}))
+ if disk.get('pool'):
+ params.update(locals().get('%s_disk_params' %
+ disk['pool']['type'], {}))
volume = disk.get('volume')
if volume is not None:
@@ -226,9 +249,13 @@ class VMTemplate(object):
volume)
else:
img = "%s-%s.img" % (vm_uuid, params['index'])
- storage_path = self._get_storage_path(disk['pool']['name'])
+ if disk.get('pool'):
+ storage_path = self._get_storage_path(disk['pool']['name'])
+ params['pool_type'] = disk['pool']['type']
+ elif disk.get('path'):
+ storage_path = disk.get('path')
+ params['pool_type'] = None
params['path'] = os.path.join(storage_path, img)
- params['pool_type'] = disk['pool']['type']
disks_xml += get_disk_xml(params)[1]
return unicode(disks_xml, 'utf-8')
@@ -237,20 +264,24 @@ class VMTemplate(object):
ret = []
for i, d in enumerate(self.info['disks']):
# Create only .img. If storagepool is (i)SCSI, volumes will be LUNs
- if d['pool']['type'] in ["iscsi", "scsi"]:
+ if 'pool' in d and d['pool']['type'] in ["iscsi", "scsi"]:
continue
index = d.get('index', i)
volume = "%s-%s.img" % (vm_uuid, index)
- storage_path = self._get_storage_path(d['pool']['name'])
+ if 'path' in d:
+ storage_path = d['path']
+ else:
+ storage_path = self._get_storage_path(d['pool']['name'])
+
info = {'name': volume,
'capacity': d['size'],
'format': d['format'],
'path': '%s/%s' % (storage_path, volume),
- 'pool': d['pool']['name']}
+ 'pool': d['pool']['name'] if 'pool' in d else None}
- if 'logical' == d['pool']['type'] or \
+ if ('pool' in d and 'logical' == d['pool']['type']) or \
info['format'] not in ['qcow2', 'raw']:
info['allocation'] = info['capacity']
else:
@@ -467,8 +498,9 @@ class VMTemplate(object):
def validate(self):
for disk in self.info.get('disks'):
- pool_uri = disk.get('pool', {}).get('name')
- self._get_storage_pool(pool_uri)
+ if 'pool' in disk:
+ pool_uri = disk.get('pool', {}).get('name')
+ self._get_storage_pool(pool_uri)
self._network_validate()
self._iso_validate()
self.cpuinfo_validate()
@@ -519,10 +551,11 @@ class VMTemplate(object):
# validate storagepools and image-based templates integrity
for disk in self.info['disks']:
- pool_uri = disk['pool']['name']
- pool_name = pool_name_from_uri(pool_uri)
- if pool_name not in self._get_active_storagepools_name():
- invalid['storagepools'] = [pool_name]
+ if 'pool' in disk:
+ pool_uri = disk['pool']['name']
+ pool_name = pool_name_from_uri(pool_uri)
+ if pool_name not in self._get_active_storagepools_name():
+ invalid['storagepools'] = [pool_name]
if disk.get("base") is None:
continue
--
2.7.4
More information about the Kimchi-devel
mailing list