[Users] Adding a bond.vlantag to ovirt-node

[Alex Leonhardt]

Sorry, the picture should actually say br2 :) ... have had to edit it to
protect the real name(s) ...

Alex


On 6 March 2013 11:39, Alex Leonhardt <alex.tuxx at gmail.com> wrote:

> All,
>
> I've added manually a bond.<vlantag> to a Hyper-Visor, then added a bridge
> and slaved bond.<vlantag> to it.
>
> I've upped the interfaces (no IPs), however ovirt-engine still wont allow
> me to add the new bridged interface. I did this yesterday, so I thought,
> maybe it's just a cache issue, however, it doesnt seem to update the HVs
> network config periodically ?
>
> What can I do to get this sorted ?? I dont want to have to restart the
> networking as VMs are running and needed.
>
> FWIW, the setup looks like this -
>
>
> eth0
>    | ----- bond0.111  --- br1
>    | ----- bond0.112  --- ovirtmgmt
> eth1
>
>
> the change was :
>
> eth0
>    | ----- bond0.111  --- br1
>    | ----- bond0.112  --- ovirtmgmt
>    | ----- bond0.113  --- br2
> eth1
>
> I then added "br2" to the ovirt-engine config, however, I'm not able to
> assign it to bond in the network config (web admin interface) for the hyper
> visor / host.
>
> Also see screenshot attached.
>
> Thanks
> Alex
>
> --
>
> | RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |
>



-- 

| RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130306/548133bf/attachment-0001.html>