[Users] VM crashes and doesn't recover

Sun Mar 31 19:55:39 UTC 2013

Can you attach the sanlock log and the full vdsm log? (compress it if it's too big and not xz yet)
Thanks.

----- Original Message -----
> Any ideas on what can cause that storage crash?
> could it be related to using a SSD?
> 
> Thanks,
> 
> Yuval Meir
> 
> 
> On Wed, Mar 27, 2013 at 6:08 PM, Yuval M < yuvalme at gmail.com > wrote:
> 
> 
> 
> Still getting crashes with the patch:
> # rpm -q vdsm
> vdsm-4.10.3-0.281.git97db188.fc18.x86_64
> 
> attached excerpts from vdsm.log and from dmesg.
> 
> Yuval
> 
> 
> On Wed, Mar 27, 2013 at 11:02 AM, Dan Kenigsberg < danken at redhat.com > wrote:
> 
> 
> 
> On Sun, Mar 24, 2013 at 09:50:02PM +0200, Yuval M wrote:
> > I am running vdsm from packages as my interest is in developing for the
> > engine and not vdsm.
> > I updated the vdsm package in an attempt to solve this, now I have:
> > # rpm -q vdsm
> > vdsm-4.10.3-10.fc18.x86_64
> 
> I'm afraid that this build still does not have the patch mentioned
> earlier.
> 
> > 
> > I noticed that when the storage domain crashes I can't even do "df -h"
> > (hangs)
> 
> That's expectable, since the master domain is still mounted (due to that
> patch missing), but unreachable.
> 
> Would you be kind to try out my little patch, in order to advance a bit
> in the research to solve the bug?
> 
> 
> > I'm also getting some errors in /var/log/messages:
> > 
> > Mar 24 19 :57:44 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to
> > svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19 :57:45 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to
> > svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19 :57:46 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to
> > svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19 :57:47 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to
> > svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19 :57:48 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to
> > svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19 :57:49 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to
> > svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19 :57:50 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to
> > svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19 :57:51 bufferoverflow sanlock[1208]: 2013-03-24 19:57:51+0200
> > 7412
> > [4759 ]: 1083422e close_task_aio 0 0x7ff3740008c0 busy
> > Mar 24 19 :57:51 bufferoverflow sanlock[1208]: 2013-03-24 19:57:51+0200
> > 7412
> > [4759 ]: 1083422e close_task_aio 1 0x7ff374000910 busy
> > Mar 24 19 :57:51 bufferoverflow sanlock[1208]: 2013-03-24 19:57:51+0200
> > 7412
> > [4759 ]: 1083422e close_task_aio 2 0x7ff374000960 busy
> > Mar 24 19 :57:51 bufferoverflow sanlock[1208]: 2013-03-24 19:57:51+0200
> > 7412
> > [4759 ]: 1083422e close_task_aio 3 0x7ff3740009b0 busy
> > Mar 24 19:57:51 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19:57:52 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19:57:53 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19:57:54 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19:57:55 bufferoverflow vdsm SuperVdsmProxy WARNING Connect to svdsm
> > failed [Errno 2] No such file or directory
> > Mar 24 19:57:55 bufferoverflow vdsm Storage.Misc ERROR Panic: Couldn't
> > connect to supervdsm
> > Mar 24 19:57:55 bufferoverflow respawn: slave '/usr/share/vdsm/vdsm' died,
> > respawning slave
> > Mar 24 19:57:55 bufferoverflow vdsm fileUtils WARNING Dir
> > /rhev/data-center/mnt already exists
> > Mar 24 19:57:58 bufferoverflow vdsm vds WARNING Unable to load the json rpc
> > server module. Please make sure it is installed.
> > Mar 24 19:57:58 bufferoverflow vdsm vm.Vm WARNING
> > vmId=`4d3d81b3-d083-4569-acc2-8e631ed51843`::Unknown type found, device:
> > '{'device': u'unix', 'alias': u'channel0', 'type': u'channel', 'address':
> > {u'bus': u'0', u'controller': u'0', u'type': u'virtio-serial', u'port':
> > u'1'}}' found
> > Mar 24 19:57:58 bufferoverflow vdsm vm.Vm WARNING
> > vmId=`4d3d81b3-d083-4569-acc2-8e631ed51843`::Unknown type found, device:
> > '{'device': u'unix', 'alias': u'channel1', 'type': u'channel', 'address':
> > {u'bus': u'0', u'controller': u'0', u'type': u'virtio-serial', u'port':
> > u'2'}}' found
> > Mar 24 19:57:58 bufferoverflow vdsm vm.Vm WARNING
> > vmId=`4d3d81b3-d083-4569-acc2-8e631ed51843`::_readPauseCode unsupported by
> > libvirt vm
> > Mar 24 19:57:58 bufferoverflow kernel: [ 7402.688177] ata1: hard resetting
> > link
> > Mar 24 19:57:59 bufferoverflow kernel: [ 7402.994510] ata1: SATA link up
> > 6.0 Gbps (SStatus 133 SControl 300)
> > Mar 24 19:57:59 bufferoverflow kernel: [ 7403.005510] ACPI Error: [DSSP]
> > Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
> > Mar 24 19:57:59 bufferoverflow kernel: [ 7403.005517] ACPI Error: Method
> > parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880407c74d48),
> > AE_NOT_FOUND (20120711/psparse-536)
> > Mar 24 19:57:59 bufferoverflow kernel: [ 7403.015485] ACPI Error: [DSSP]
> > Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
> > Mar 24 19:57:59 bufferoverflow kernel: [ 7403.015493] ACPI Error: Method
> > parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880407c74d48),
> > AE_NOT_FOUND (20120711/psparse-536)
> > Mar 24 19:57:59 bufferoverflow kernel: [ 7403.016061] ata1.00: configured
> > for UDMA/133
> > Mar 24 19:57:59 bufferoverflow kernel: [ 7403.016066] ata1: EH complete
> > Mar 24 19:58:01 bufferoverflow sanlock[1208]: 2013-03-24 19:58:01+0200 7422
> > [4759]: 1083422e close_task_aio 0 0x7ff3740008c0 busy
> > Mar 24 19:58:01 bufferoverflow sanlock[1208]: 2013-03-24 19:58:01+0200 7422
> > [4759]: 1083422e close_task_aio 1 0x7ff374000910 busy
> > Mar 24 19:58:01 bufferoverflow sanlock[1208]: 2013-03-24 19:58:01+0200 7422
> > [4759]: 1083422e close_task_aio 2 0x7ff374000960 busy
> > Mar 24 19:58:01 bufferoverflow sanlock[1208]: 2013-03-24 19:58:01+0200 7422
> > [4759]: 1083422e close_task_aio 3 0x7ff3740009b0 busy
> > Mar 24 19:58:01 bufferoverflow kernel: [ 7405.714145] device-mapper: table:
> > 253:0: multipath: error getting device
> > Mar 24 19:58:01 bufferoverflow kernel: [ 7405.714148] device-mapper: ioctl:
> > error adding target to table
> > Mar 24 19:58:01 bufferoverflow kernel: [ 7405.715051] device-mapper: table:
> > 253:0: multipath: error getting device
> > Mar 24 19:58:01 bufferoverflow kernel: [ 7405.715053] device-mapper: ioctl:
> > error adding target to table
> > 
> > ata1 is a 500GB SSD. (only SATA device on the system except a DVD drive)
> > 
> > Yuval
> > 
> > 
> > On Sun, Mar 24, 2013 at 2:52 PM, Dan Kenigsberg < danken at redhat.com >
> > wrote:
> > 
> > > On Fri, Mar 22, 2013 at 08:24:35PM +0200, Limor Gavish wrote:
> > > > Hello,
> > > > 
> > > > I am using Ovirt 3.2 on Fedora 18:
> > > > [wil at bufferoverflow ~]$ rpm -q vdsm
> > > > vdsm-4.10.3-7.fc18.x86_64
> > > > 
> > > > (the engine is built from sources).
> > > > 
> > > > I seem to have hit this bug:
> > > > https://bugzilla.redhat.com/show_bug.cgi?id=922515
> > > 
> > > This bug is only one part of the problem, but it's nasty enough that I
> > > have just suggested it as a fix to the ovirt-3.2 branch of vdsm:
> > > http://gerrit.ovirt.org/13303
> > > 
> > > Could you test if with it, vdsm relinquishes its spm role, and recovers
> > > as operational?
> > > 
> > > > 
> > > > in the following configuration:
> > > > Single host (no migrations)
> > > > Created a VM, installed an OS inside (Fedora18)
> > > > stopped the VM.
> > > > created template from it.
> > > > Created an additional VM from the template using thin provision.
> > > > Started the second VM.
> > > > 
> > > > in addition to the errors in the logs the storage domains (both data
> > > > and
> > > > ISO) crashed, i.e went to "unknown" and "inactive" states respectively.
> > > > (see the attached engine.log)
> > > > 
> > > > I attached the VDSM and engine logs.
> > > > 
> > > > is there a way to work around this problem?
> > > > It happens repeatedly.
> > > > 
> > > > Yuval Meir
> > > 
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 