[ovirt-users] Re-add a node

James James jreg2k at gmail.com
Fri Apr 11 13:10:57 UTC 2014


Nothing new.  node1 can't release SPM ... :(


2014-04-11 14:49 GMT+02:00 Dafna Ron <dron at redhat.com>:

> confirm host has been rebooted should release the SPM :)
>
>
>
> On 04/11/2014 01:23 PM, James James wrote:
>
>>
>>
>>
>> 2014-04-11 14:08 GMT+02:00 Dafna Ron <dron at redhat.com <mailto:
>> dron at redhat.com>>:
>>
>>
>>     James, Please answer the user's list as well as to me so that
>>     other people can participate as well :)
>>
>>
>> Oups ... I will do that ..
>>
>>
>>
>>     did you try to press the "confirm host has been rebooted"  (right
>>     click)
>>
>>
>> Yes but same problem. node1 cannot be in maintenance mode.
>>
>> node1 is SPM . I will make node1 release the SPM ressource.
>>
>>
>>
>>     On 04/11/2014 12:41 PM, James James wrote:
>>
>>
>>
>>
>>         2014-04-11 13:16 GMT+02:00 Dafna Ron <dron at redhat.com
>>         <mailto:dron at redhat.com> <mailto:dron at redhat.com
>>
>>         <mailto:dron at redhat.com>>>:
>>
>>
>>             what is the error message you get when you try to put the
>>         host in
>>             maintenance?
>>
>>         I have this message :
>>
>>
>>         Error while executing action: Cannot switch Host to
>>         Maintenance mode.
>>         Host is Storage Pool Manager and is in Non Responsive state.
>>         - If power management is configured, engine will try to fence
>>         the host automatically.
>>         - Otherwise, either bring the node back up, or release the SPM
>>         resource.
>>         To do so, verify that the node is really down by right
>>         clicking on the host and confirm that the node was shutdown
>>         manually.
>>
>>
>>
>>             are there any running vm's reported?
>>
>>
>>         No there is no VM running on this host
>>
>>
>>
>>             Try to press the "confirm host has been rebooted" button
>>         and than
>>             see if you can put the host in maintenance.
>>
>>             If that fails, select the host, in the general tab you
>>         will get
>>             the re-install link.
>>
>>
>>
>>         I am running ovirt 3.4.0-1. I down't know where is the
>>         re-install link but I can't see it.
>>
>>             try to re-install, when install fails the host should change
>>             status to failed installation.
>>
>>
>>
>>
>>             On 04/11/2014 12:09 PM, James James wrote:
>>
>>                 No, I can't ....
>>
>>
>>                 2014-04-11 12:12 GMT+02:00 Dafna Ron <dron at redhat.com
>>         <mailto:dron at redhat.com>
>>                 <mailto:dron at redhat.com <mailto:dron at redhat.com>>
>>         <mailto:dron at redhat.com <mailto:dron at redhat.com>
>>
>>                 <mailto:dron at redhat.com <mailto:dron at redhat.com>>>>:
>>
>>
>>
>>                     can you put the host in maintenance?
>>
>>
>>
>>
>>                     On 04/11/2014 10:43 AM, James James wrote:
>>
>>                         I can't delete the old node because it is in Non
>>                 Responsive
>>                         state. The remove button is stil blank .
>>
>>                         In the engine.log I've got this log :
>>                         2014-04-11 11:40:45,911 ERROR
>>          [org.ovirt.engine.core.vdsbroker.vdsbroker.
>> GetCapabilitiesVDSCommand]
>>                         (DefaultQuartzScheduler_Worker-88) Command
>>                         GetCapabilitiesVDSCommand(HostName = node1,
>>         HostId =
>>                         36fb6df3-c2c2-4133-86ac-fe50b99ee2e3,
>>         vds=Host[node1])
>>                         execution failed. Exception: VDSNetworkException:
>>          sun.security.provider.certpath.SunCertPathBuilderException:
>>                         unable to find valid certification path to
>>         requested
>>                 target
>>                         2014-04-11 11:40:48,943 ERROR
>>          [org.ovirt.engine.core.vdsbroker.vdsbroker.
>> GetCapabilitiesVDSCommand]
>>                         (DefaultQuartzScheduler_Worker-12) Command
>>                         GetCapabilitiesVDSCommand(HostName = node1,
>>         HostId =
>>                         36fb6df3-c2c2-4133-86ac-fe50b99ee2e3,
>>         vds=Host[node1])
>>                         execution failed. Exception: VDSNetworkException:
>>          sun.security.provider.certpath.SunCertPathBuilderException:
>>                         unable to find valid certification path to
>>         requested
>>                 target
>>
>>
>>
>>
>>
>>                         2014-04-11 11:06 GMT+02:00 Alon Bar-Lev
>>                 <alonbl at redhat.com <mailto:alonbl at redhat.com>
>>         <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>>
>>                         <mailto:alonbl at redhat.com
>>         <mailto:alonbl at redhat.com> <mailto:alonbl at redhat.com
>>         <mailto:alonbl at redhat.com>>>
>>                 <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>
>>         <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>>
>>
>>                         <mailto:alonbl at redhat.com
>>         <mailto:alonbl at redhat.com> <mailto:alonbl at redhat.com
>>         <mailto:alonbl at redhat.com>>>>>:
>>
>>
>>
>>
>>
>>                             ----- Original Message -----
>>                             > From: "James James" <jreg2k at gmail.com
>>         <mailto:jreg2k at gmail.com>
>>                 <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>
>>                         <mailto:jreg2k at gmail.com
>>         <mailto:jreg2k at gmail.com> <mailto:jreg2k at gmail.com
>>         <mailto:jreg2k at gmail.com>>>
>>                 <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>
>>         <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>
>>                         <mailto:jreg2k at gmail.com
>>         <mailto:jreg2k at gmail.com> <mailto:jreg2k at gmail.com
>>         <mailto:jreg2k at gmail.com>>>>>
>>                             > To: dron at redhat.com
>>         <mailto:dron at redhat.com> <mailto:dron at redhat.com
>>         <mailto:dron at redhat.com>>
>>                 <mailto:dron at redhat.com <mailto:dron at redhat.com>
>>         <mailto:dron at redhat.com <mailto:dron at redhat.com>>>
>>                         <mailto:dron at redhat.com
>>         <mailto:dron at redhat.com> <mailto:dron at redhat.com
>>         <mailto:dron at redhat.com>>
>>                 <mailto:dron at redhat.com <mailto:dron at redhat.com>
>>         <mailto:dron at redhat.com <mailto:dron at redhat.com>>>>
>>                             > Cc: "users" <users at ovirt.org
>>         <mailto:users at ovirt.org>
>>                 <mailto:users at ovirt.org <mailto:users at ovirt.org>>
>>         <mailto:users at ovirt.org <mailto:users at ovirt.org>
>>                 <mailto:users at ovirt.org <mailto:users at ovirt.org>>>
>>                         <mailto:users at ovirt.org
>>         <mailto:users at ovirt.org> <mailto:users at ovirt.org
>>         <mailto:users at ovirt.org>>
>>                 <mailto:users at ovirt.org <mailto:users at ovirt.org>
>>         <mailto:users at ovirt.org <mailto:users at ovirt.org>>>>>
>>                             > Sent: Friday, April 11, 2014 12:04:23 PM
>>                             > Subject: Re: [ovirt-users] Re-add a node
>>                             >
>>                             > The engine is the same but the node
>>         (node1) has been
>>                         reinstalled ...
>>
>>                             So you need to re-add it to the engine.
>>                             Delete the old node at engine side and use the
>>                 node user
>>                         interface
>>                             to add it to the engine.
>>
>>                             >
>>                             >
>>                             > 2014-04-11 10:48 GMT+02:00 James James <
>>         jreg2k at gmail.com <mailto:jreg2k at gmail.com>
>>         <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>
>>                 <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>
>>         <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>>
>>                             <mailto:jreg2k at gmail.com
>>         <mailto:jreg2k at gmail.com> <mailto:jreg2k at gmail.com
>>         <mailto:jreg2k at gmail.com>>
>>                 <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>
>>         <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>>> > :
>>
>>
>>                             >
>>                             >
>>                             >
>>                             > the log contains information about the
>>         first node1
>>                         installation ....
>>                             >
>>                             > http://pastebin.com/mZSb2wmD
>>                             >
>>                             >
>>                             > 2014-04-11 10:12 GMT+02:00 Dafna Ron <
>>         dron at redhat.com <mailto:dron at redhat.com>
>>         <mailto:dron at redhat.com <mailto:dron at redhat.com>>
>>                         <mailto:dron at redhat.com
>>         <mailto:dron at redhat.com> <mailto:dron at redhat.com
>>         <mailto:dron at redhat.com>>>
>>                             <mailto:dron at redhat.com
>>         <mailto:dron at redhat.com> <mailto:dron at redhat.com
>>         <mailto:dron at redhat.com>>
>>                 <mailto:dron at redhat.com <mailto:dron at redhat.com>
>>         <mailto:dron at redhat.com <mailto:dron at redhat.com>>>> > :
>>
>>
>>                             >
>>                             >
>>                             >
>>                             > please add the host-deploy log from
>>                         /var/log/ovirt-engine/host-
>>                             deploy/
>>                             >
>>                             >
>>                             > On 04/11/2014 12:11 AM, James James wrote:
>>                             >
>>                             >
>>                             >
>>                             > Hi,
>>                             > I don know i the subject is explicit
>>         enough but
>>                 I have a
>>                         problem
>>                             and I hope
>>                             > to find some help here.
>>                             >
>>                             > I had two hosts in my cluster (node1 and
>>         node2).
>>                 I had to
>>                             reinstall node1 due
>>                             > to some networks problem. In the engine,
>>         node1
>>                 appears
>>                         now "Not
>>                             reponsive"
>>                             > and I can't remove it from the engine ui.
>>                             >
>>                             > Now node1 is back and I want to add it
>>         in the
>>                 cluster but I
>>                             can't. I've got
>>                             > this error (vdsm.log) :
>>                             > BindingXMLRPC::ERROR::2014-04- 11 01
>>         <tel:2014-04-%2011%2001>
>>                 <tel:2014-04-%2011%2001>
>>         <tel:2014-04-%2011%2001>
>>         <tel:2014-04-%2011%2001>:04:42,622::BindingXMLRPC::
>>
>>                             > 81::vds::(threaded_start) xml-rpc
>>         handler exception
>>                             > Traceback (most recent call last):
>>                             > File "/usr/share/vdsm/
>>         BindingXMLRPC.py", line
>>                 77, in
>>                         threaded_start
>>                             > self.server.handle_request()
>>                             > File "/usr/lib64/python2.6/
>>         SocketServer.py",
>>                 line 278, in
>>                             handle_request
>>                             > self._handle_request_noblock()
>>                             > File "/usr/lib64/python2.6/
>>         SocketServer.py",
>>                 line 288, in
>>                             > _handle_request_noblock
>>                             > request, client_address = self.get_request()
>>                             > File "/usr/lib64/python2.6/
>>         SocketServer.py",
>>                 line 456, in
>>                             get_request
>>                             > return self.socket.accept()
>>                             > File "/usr/lib64/python2.6/site-
>>         packages/vdsm/
>>                             SecureXMLRPCServer.py", line
>>                             > 136, in accept
>>                             > raise SSL.SSLError("%s, client %s" % (e,
>>                 address[0]))
>>                             > SSLError: sslv3 alert certificate
>>         unknown, client
>>                         192.168.1.100
>>                             >
>>                             > 192.168.1.100 is the engine's address
>>                             >
>>                             > Can somebody help me ?
>>                             >
>>                             >
>>                             >
>>                             > ______________________________
>>         _________________
>>                             > Users mailing list
>>                             > Users at ovirt.org <mailto:Users at ovirt.org>
>>         <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>>                 <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>         <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>>                         <mailto:Users at ovirt.org
>>         <mailto:Users at ovirt.org> <mailto:Users at ovirt.org
>>         <mailto:Users at ovirt.org>>
>>                 <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>         <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>>
>>
>>
>>                             > http://lists.ovirt.org/
>>         mailman/listinfo/users
>>                             >
>>                             >
>>                             > --
>>                             > Dafna Ron
>>                             >
>>                             >
>>                             >
>>                             >
>>         _______________________________________________
>>                             > Users mailing list
>>                             > Users at ovirt.org <mailto:Users at ovirt.org>
>>         <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>>                 <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>         <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>>                         <mailto:Users at ovirt.org
>>         <mailto:Users at ovirt.org> <mailto:Users at ovirt.org
>>         <mailto:Users at ovirt.org>>
>>                 <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>>         <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>>
>>
>>                             >
>>         http://lists.ovirt.org/mailman/listinfo/users
>>                             >
>>
>>
>>
>>
>>                     --     Dafna Ron
>>
>>
>>
>>
>>             --     Dafna Ron
>>
>>
>>
>>
>>     --     Dafna Ron
>>
>>
>>
>
> --
> Dafna Ron
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140411/48f3ab3e/attachment-0001.html>


More information about the Users mailing list