[ovirt-users] oVirt not starting primary storage domain

[Raz Tamir]

As far as I can see from the logs you removed 3 bricks. Can you confirm? 




Thanks in advance, 
Raz Tamir 
ratamir at redhat.com 
RedHat Israel 
RHEV-M QE Storage team 

----- Original Message -----

From: "Stephen Repetski" <srepetsk at srepetsk.net> 
To: "Raz Tamir" <ratamir at redhat.com> 
Cc: "users" <users at ovirt.org> 
Sent: Friday, July 24, 2015 12:01:16 AM 
Subject: Re: [ovirt-users] oVirt not starting primary storage domain 

Hi Raz: 

I'm using vdsm-4.16.14-0.el6.x86_64 with glusterfs-3.6.2-1.el6.x86_64 on oVirt 3.5.2. 

I removed the brick with: gluster remove-brick store1 replica 3 $1 $2 $3 start; gluster remove-brick store1 replica 3 $1 $2 $3 commit. Between the two commands I used the 'status' option to verify that all nodes were marked as 'completed' before running the 'commit' one. 

Also, the two log files you requested are available here: 
http://srepetsk.net/files/engine.log.20150723 && http://srepetsk.net/files/etc-glusterfs-glusterd.vol.log.20150723 
The gluster log file is from one of the servers from a different brick in the primary (aka "store1") datacenter/gluster volume, so it was and still is in the volume. 


Thanks, 
Stephen 


Stephen Repetski 
Rochester Institute of Technology '13 | http://srepetsk.net 

On Thu, Jul 23, 2015 at 4:28 PM, Raz Tamir < ratamir at redhat.com > wrote: 



Hi Stephen, 
1) Can you please provide the vdsm and gluster versions? 
2) How you removed the brick? 
3) Can you please attach the glusterfs log located under /var/log ? 

* Just for info - there is no support for gluster if the volume is not a 3-way replica 




Thanks in advance, 
Raz Tamir 
ratamir at redhat.com 
RedHat Israel 
RHEV-M QE Storage team 


From: "Stephen Repetski" < srepetsk at srepetsk.net > 
To: "users" < users at ovirt.org > 
Sent: Thursday, July 23, 2015 11:08:57 PM 
Subject: [ovirt-users] oVirt not starting primary storage domain 


Hi all, 

I recently made a change with the gluster volume backing my primary storage domain (removed 1 of the 3 bricks, each w/ 3x replication), and now oVirt fails to activate the primary storage domain. After attempting to start the domain the engine goes through and does its various commications with VDSM, but then fails out with a "Sanlock resource read failure" - https://gist.githubusercontent.com/srepetsk/83ef13ddcf1e690a398e/raw/ada362ac43ae71984a90979a676f2738648ac4ac/gistfile1.txt 

Is there a way to figure out more on what this SpmStatusVDS error is and what might be causing it? 

Thanks, 
Stephen 

Stephen Repetski 

_______________________________________________ 
Users mailing list 
Users at ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150723/18ce4794/attachment-0001.html>