[ovirt-users] hosted-engine stuck "failed liveliness check" "detail": "up"
Paul Groeneweg | Pazion
paul at pazion.nl
Fri Apr 15 11:33:04 UTC 2016
Thanks for the help!
I managed to fix it :-)
I made a device from the hosted engine file with losetup and for the LVM
again.
>From there I was able to fsck my partition. And answered a lot of y to the
list of inconsistences.
I removed the loop back devices.
I turned off maintenance mode and hosted engine started :-)
Few hours later , restore of the pgsql db and scratching my head, very
happy it is running again without any VMS being offline meanwhile :)
I will defintely save the way to start hosted-engine with cd iso, as this
seems less error sensitive and easier to do.
Thanks!
Op vr 15 apr. 2016 om 11:35 schreef Simone Tiraboschi <stirabos at redhat.com>:
> On Fri, Apr 15, 2016 at 11:02 AM, Paul Groeneweg | Pazion
> <paul at pazion.nl> wrote:
> > Thanks!
> >
> > I managed to get the console through:
> >
> > hosted-engine --add-console-password
> > /bin/remote-viewer vnc://localhost:5900
> >
> > Turns out, there seems to be some corruption on the partition:
> > http://screencast.com/t/6iR0U3QuI
> >
> > Is there a way to boot from CD, so I can start rescue mode?
>
> Yes,
> you have to set global maintenance mode to avoid VM start attempts on
> other hosts.
>
> You have to poweroff the engine VM with:
> hosted-engine --vm-shutdown/--vm-poweroff (probably the second one in
> your case)
> Then you have to create a copy of
> /var/run/ovirt-hosted-engine-ha/vm.conf and you have to manually edit
> it in order to attach the ISO image and change the boot order.
> At that point you can start the engine VM with your custom configuration
> with:
> hosted-engine --vm-start --vm-conf=my_custom_vm.conf
>
> Good luck!
>
> > Op vr 15 apr. 2016 om 10:58 schreef Martin Sivak <msivak at redhat.com>:
> >>
> >> Hi,
> >>
> >> you can access the console using vnc or use virsh to get access to the
> >> serial console.
> >>
> >> Check the following commands on the host where the VM is currently
> >> running:
> >>
> >> virsh -r list
> >> virsh -r console HostedEngine
> >> virsh -r vncdisplay HostedEngine
> >>
> >> Those should give you enough pointers to connect to the VM.
> >>
> >> Regards
> >>
> >> Martin Sivak
> >>
> >>
> >>
> >> On Fri, Apr 15, 2016 at 10:14 AM, Paul Groeneweg | Pazion
> >> <paul at pazion.nl> wrote:
> >> >
> >> > Tonight my server with NFS hosted-engine mount crashed.
> >> > Now all is back online ,except the hosted engine. I can't ping or ssh
> >> > the
> >> > machine
> >> >
> >> > when I do hosted-engine --vm-status, I get:
> >> >
> >> > ..........
> >> > --== Host 2 status ==--
> >> >
> >> > Status up-to-date : True
> >> > Hostname : geisha-3.pazion.nl
> >> > Host ID : 2
> >> > Engine status : {"reason": "failed liveliness
> >> > check",
> >> > "health": "bad", "vm": "up", "detail": "up"}
> >> > Score : 3400
> >> > stopped : False
> >> > Local maintenance : False
> >> > crc32 : d71d7c6b
> >> > Host timestamp : 4404
> >> > ............
> >> >
> >> > I tried restarting all services/nfs mounts, start hosted engine on
> other
> >> > hosts, but all the same host up, but liveliness failed and unable to
> >> > access
> >> > the network/IP.
> >> >
> >> > I imagine it is stuck at the console requiring a fsck check maybe?
> >> > Is there a way to access the boot display directly?
> >> >
> >> > Any help is highly appreciated!
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > Users mailing list
> >> > Users at ovirt.org
> >> > http://lists.ovirt.org/mailman/listinfo/users
> >> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160415/2efb6c43/attachment-0001.html>
More information about the Users
mailing list