Re: [Engine-devel] Error while trying to read parameter HTTP_PORT from user

Hi, There is a problem in setup ovirt-engine,“Error while trying to read parameter HTTP_PORT from user.” The env is setup with ovirt-engine 3.2.0 from http://www.ovirt.org/Building_oVirt_engine , at last i try to input ‘make’ to configure ovirt engine. Selinux is ‘SELINUX=enforcing’ in /etc/selinux/config Iptalbles is running, and the below ports in open. iptables -I INPUT 1 -p tcp --dport 443 -j ACCEPT iptables -I INPUT 1 -p tcp --dport 80 -j ACCEPT iptables -I INPUT 1 -p tcp --dport 4457 -j ACCEPT iptables -I INPUT 1 -p tcp --dport 8443 -j ACCEPT iptables -I INPUT 1 -p tcp --dport 8083 -j ACCEPT iptables -I INPUT 1 -p tcp --dport 1090 -j ACCEPT /usr/share/jboss-as/bin/standalone.sh can run too. The below is printing out information when I input engine-setup: ################################### #engine-setup Welcome to oVirt Engine setup utility In order to proceed the installer must stop the ovirt-engine service Would you like to stop the ovirt-engine service? (yes|no): yes oVirt Engine uses httpd to proxy requests to the application server. It looks like the httpd installed locally is being actively used. The installer can override current configuration . Alternatively you can use JBoss directly (on ports higher than 1024) Do you wish to override current httpd configuration and restart the service? ['yes'| 'no'] [yes] : yse Error: response is not part of the following accepted answers: yes, no oVirt Engine uses httpd to proxy requests to the application server. It looks like the httpd installed locally is being actively used. The installer can override current configuration . Alternatively you can use JBoss directly (on ports higher than 1024) Do you wish to override current httpd configuration and restart the service? ['yes'| 'no'] [yes] : yes HTTP Port [80] : 80 Error while trying to read parameter HTTP_PORT from user. Please check log file /var/log/ovirt-engine/engine-setup_2013_01_17_04_18_17.log for more information Below is /var/log/ovirt-engine/engine-setup_2013_01_17_04_18_17.log ###########/var/log/ovirt-engine/engine-setup_2013_01_17_04_18_17.log ########## 2013-01-17 04:18:17::DEBUG::common_utils::1255::root:: checking if firewalld service is available 2013-01-17 04:18:17::DEBUG::common_utils::430::root:: Executing command --> '/bin/systemctl show firewalld' 2013-01-17 04:18:17::DEBUG::common_utils::468::root:: output = 2013-01-17 04:18:17::DEBUG::common_utils::469::root:: stderr = Failed to issue method call: Unit name firewalld is not valid. 2013-01-17 04:18:17::DEBUG::common_utils::470::root:: retcode = 1 2013-01-17 04:18:17::DEBUG::common_utils::1255::root:: checking if iptables service is available 2013-01-17 04:18:17::DEBUG::common_utils::430::root:: Executing command --> '/bin/systemctl show iptables' 2013-01-17 04:18:17::DEBUG::common_utils::468::root:: output = 2013-01-17 04:18:17::DEBUG::common_utils::469::root:: stderr = Failed to issue method call: Unit name iptables is not valid. 2013-01-17 04:18:17::DEBUG::common_utils::470::root:: retcode = 1 2013-01-17 04:18:17::DEBUG::common_utils::430::root:: Executing command --> '/sbin/ip addr' 2013-01-17 04:18:17::DEBUG::common_utils::468::root:: output = 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 2c:41:38:a8:41:13 brd ff:ff:ff:ff:ff:ff inet 10.239.131.232/24 brd 10.239.131.255 scope global em1 inet6 fe80::2e41:38ff:fea8:4113/64 scope link valid_lft forever preferred_lft forever 2013-01-17 04:18:17::DEBUG::common_utils::469::root:: stderr = 2013-01-17 04:18:17::DEBUG::common_utils::470::root:: retcode = 0 2013-01-17 04:18:17::DEBUG::common_utils::589::root:: Found IP Address: 10.239.131.232 2013-01-17 04:18:17::DEBUG::engine-setup::2139::root:: initiating command line option parser 2013-01-17 04:18:17::DEBUG::engine-setup::2106::root:: checking total memory 2013-01-17 04:18:17::DEBUG::common_utils::430::root:: Executing command --> '/usr/bin/free -m' 2013-01-17 04:18:17::DEBUG::common_utils::468::root:: output = total used free shared buffers cached Mem: 7945 627 7317 0 15 406 -/+ buffers/cache: 205 7739 Swap: 9983 0 9983 2013-01-17 04:18:17::DEBUG::common_utils::469::root:: stderr = 2013-01-17 04:18:17::DEBUG::common_utils::470::root:: retcode = 0 2013-01-17 04:18:17::DEBUG::engine-setup::2118::root:: Found a match, amount of memory: 7945 2013-01-17 04:18:17::DEBUG::engine-setup::2008::root:: Entered main(configFile='None') 2013-01-17 04:18:17::DEBUG::engine-setup::1802::root:: stopping ovirt-engine service 2013-01-17 04:18:17::DEBUG::common_utils::967::root:: asking user: Would you like to stop the ovirt-engine service? (yes|no): 2013-01-17 04:18:19::DEBUG::common_utils::971::root:: user answered: yes 2013-01-17 04:18:19::DEBUG::common_utils::1211::root:: stopping ovirt-engine 2013-01-17 04:18:19::DEBUG::common_utils::1248::root:: executing action ovirt-engine on service stop 2013-01-17 04:18:19::DEBUG::common_utils::430::root:: Executing command --> '/sbin/service ovirt-engine stop' 2013-01-17 04:18:19::DEBUG::common_utils::468::root:: output = 2013-01-17 04:18:19::DEBUG::common_utils::469::root:: stderr = 2013-01-17 04:18:19::DEBUG::common_utils::470::root:: retcode = 0 2013-01-17 04:18:19::DEBUG::engine-setup::1532::root:: going over group PORTS 2013-01-17 04:18:19::DEBUG::common_utils::1289::root:: retrieving version for ipa-server rpm 2013-01-17 04:18:19::DEBUG::common_utils::1310::root:: getRpmVersion failed Traceback (most recent call last): File "/usr/local/share/ovirt-engine/scripts/common_utils.py", line 1307, in installed getRpmVersion(rpmName=rpm) File "/usr/local/share/ovirt-engine/scripts/common_utils.py", line 1301, in getRpmVersion raise Exception(output_messages.ERR_READ_RPM_VER % rpmName) Exception: Error reading version number for package ipa-server 2013-01-17 04:18:19::DEBUG::common_utils::1289::root:: retrieving version for freeipa-server rpm 2013-01-17 04:18:19::DEBUG::common_utils::1310::root:: getRpmVersion failed Traceback (most recent call last): File "/usr/local/share/ovirt-engine/scripts/common_utils.py", line 1307, in installed getRpmVersion(rpmName=rpm) File "/usr/local/share/ovirt-engine/scripts/common_utils.py", line 1301, in getRpmVersion raise Exception(output_messages.ERR_READ_RPM_VER % rpmName) Exception: Error reading version number for package freeipa-server 2013-01-17 04:18:19::INFO::engine-setup::1541::root:: Comparing pre-conditions; condition: 'True', and match: 'True' 2013-01-17 04:18:20::INFO::engine_validators::199::root:: validateOverrideHttpdConfAndChangePortsAccordingly yse as part of ['yes', 'no'] 2013-01-17 04:18:20::INFO::engine_validators::182::root:: Validating yse as part of ['yes', 'no'] 2013-01-17 04:18:22::INFO::engine_validators::199::root:: validateOverrideHttpdConfAndChangePortsAccordingly yes as part of ['yes', 'no'] 2013-01-17 04:18:22::INFO::engine_validators::182::root:: Validating yes as part of ['yes', 'no'] 2013-01-17 04:18:22::DEBUG::engine_validators::207::root:: stopping httpd service 2013-01-17 04:18:22::DEBUG::common_utils::1211::root:: stopping httpd 2013-01-17 04:18:22::DEBUG::common_utils::1248::root:: executing action httpd on service stop 2013-01-17 04:18:22::DEBUG::common_utils::430::root:: Executing command --> '/sbin/service httpd stop' 2013-01-17 04:18:22::DEBUG::common_utils::468::root:: output = 2013-01-17 04:18:22::DEBUG::common_utils::469::root:: stderr = 2013-01-17 04:18:22::DEBUG::common_utils::470::root:: retcode = 0 2013-01-17 04:18:24::DEBUG::engine_validators::62::root:: Validating 80 as a valid TCP Port 2013-01-17 04:18:24::DEBUG::common_utils::394::root:: Checking if TCP port 80 is open by any process 2013-01-17 04:18:24::DEBUG::common_utils::430::root:: Executing command --> '/usr/sbin/lsof -i -n -P' 2013-01-17 04:18:24::ERROR::engine-setup::601::root:: Traceback (most recent call last): File "/usr/local/bin/engine-setup", line 574, in _getInputFromUser if param.getKey("VALIDATION_FUNC")(userInput, param.getKey("OPTION_LIST")): File "/usr/local/share/ovirt-engine/scripts/engine_validators.py", line 81, in validatePort (portOpen, process, pid) = utils.isTcpPortOpen(param) File "/usr/local/share/ovirt-engine/scripts/common_utils.py", line 399, in isTcpPortOpen output, rc = execCmd(cmdList=cmd, failOnError=True, msg=output_messages.ERR_EXP_LSOF) File "/usr/local/share/ovirt-engine/scripts/common_utils.py", line 454, in execCmd env=env, File "/usr/lib64/python2.7/subprocess.py", line 679, in __init__ errread, errwrite) File "/usr/lib64/python2.7/subprocess.py", line 1249, in _execute_child raise child_exception OSError: [Errno 2] No such file or directory 2013-01-17 04:18:25::ERROR::engine-setup::1577::root:: Traceback (most recent call last): File "/usr/local/bin/engine-setup", line 1546, in _handleInteractiveParams input_param(param) File "/usr/local/bin/engine-setup", line 628, in input_param _getInputFromUser(param) File "/usr/local/bin/engine-setup", line 602, in _getInputFromUser raise Exception(output_messages.ERR_EXP_READ_INPUT_PARAM % (param.getKey("CONF_NAME"))) Exception: Error while trying to read parameter HTTP_PORT from user. 2013-01-17 04:18:25::DEBUG::engine-setup::1875::root:: *** The following params were used as user input: 2013-01-17 04:18:25::DEBUG::engine-setup::1880::root:: override-httpd-config: yes 2013-01-17 04:18:25::ERROR::engine-setup::2295::root:: Traceback (most recent call last): File "/usr/local/bin/engine-setup", line 2290, in <module> main(confFile) File "/usr/local/bin/engine-setup", line 2028, in main _handleParams(configFile) File "/usr/local/bin/engine-setup", line 1589, in _handleParams _handleInteractiveParams() File "/usr/local/bin/engine-setup", line 1546, in _handleInteractiveParams input_param(param) File "/usr/local/bin/engine-setup", line 628, in input_param _getInputFromUser(param) File "/usr/local/bin/engine-setup", line 602, in _getInputFromUser raise Exception(output_messages.ERR_EXP_READ_INPUT_PARAM % (param.getKey("CONF_NAME"))) Exception: Error while trying to read parameter HTTP_PORT from user. Best Regards, Dave Chen