3:54 p.m.
Hi everyone,
After I screwed up my dev environment beyond repair I have to set it up again and I see
something I haven't last time (CentOS 7):
$ sudo yum install ansible-runner-service-dev
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.hosting90.cz
* centos-sclo-rh: mirror.hosting90.cz
* centos-sclo-sclo: mirror.hosting90.cz
* extras: mirror.hosting90.cz
* ovirt-master-epel: mirror.hosting90.cz
* ovirt-master-snapshot: ftp.nluug.nl
* ovirt-master-snapshot-static: ftp.nluug.nl
* updates: mirror.hosting90.cz
No package ansible-runner-service-dev available.
Maybe something's missing from my notes, but where did it go? Should I add some repo?
Fedor
4:24 p.m.
Hi Fedor,
Please try:
1. dnf install
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
2. dnf update
3. dnf install ansible-runner-service-dev
4. flow the instruction from thread 'New dependency for development
environment'
The
On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Hi everyone,
After I screwed up my dev environment beyond repair I have to set it up
again and I see something I haven't last time (CentOS 7):
$ sudo yum install ansible-runner-service-dev
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.hosting90.cz
* centos-sclo-rh: mirror.hosting90.cz
* centos-sclo-sclo: mirror.hosting90.cz
* extras: mirror.hosting90.cz
* ovirt-master-epel: mirror.hosting90.cz
* ovirt-master-snapshot: ftp.nluug.nl
* ovirt-master-snapshot-static: ftp.nluug.nl
* updates: mirror.hosting90.cz
No package ansible-runner-service-dev available.
Maybe something's missing from my notes, but where did it go? Should I add
some repo?
Fedor
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
--
Regards,
Eyal Shenitzky
5:37 p.m.
New subject: what's up with ansible-runner-service-dev package?
Thanks for the response, Eyal!
I already had ovirt-master repo installed, but updated everything just in case.
I even tried both yum and dnf (since yum on centos was giving me lots of grief before and
I learned their behaviour differs, especially when it comes to bugs) but none works...
No package ansible-runner-service-dev available.
No match for argument: ansible-runner-service-dev
Fedor
----- Original Message -----
From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "devel" <devel(a)ovirt.org>
Sent: Tuesday, March 10, 2020 2:24:16 PM
Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev package?
Hi Fedor,
Please try:
1. dnf install
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
2. dnf update
3. dnf install ansible-runner-service-dev
4. flow the instruction from thread 'New dependency for development
environment'
The
On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Hi everyone,
After I screwed up my dev environment beyond repair I have to set it up
again and I see something I haven't last time (CentOS 7):
$ sudo yum install ansible-runner-service-dev
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.hosting90.cz
* centos-sclo-rh: mirror.hosting90.cz
* centos-sclo-sclo: mirror.hosting90.cz
* extras: mirror.hosting90.cz
* ovirt-master-epel: mirror.hosting90.cz
* ovirt-master-snapshot: ftp.nluug.nl
* ovirt-master-snapshot-static: ftp.nluug.nl
* updates: mirror.hosting90.cz
No package ansible-runner-service-dev available.
Maybe something's missing from my notes, but where did it go? Should I add
some repo?
Fedor
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
--
Regards,
Eyal Shenitzky
7:56 p.m.
Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <fgavrilo(a)redhat.com>
ha scritto:
Thanks for the response, Eyal!
I already had ovirt-master repo installed, but updated everything just in
case.
I even tried both yum and dnf (since yum on centos was giving me lots of
grief before and I learned their behaviour differs, especially when it
comes to bugs) but none works...
>No package ansible-runner-service-dev available.
>No match for argument: ansible-runner-service-dev
Fedor
Looks like you're trying to install ovirt-master-snapshot on el7.
It won't work.
Master is not supporting el7 anymore.
You can use 4.3 snapshot rpm at :
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm if
you need to stay on el7.
----- Original Message -----
From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "devel" <devel(a)ovirt.org>
Sent: Tuesday, March 10, 2020 2:24:16 PM
Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev
package?
Hi Fedor,
Please try:
1. dnf install
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
2. dnf update
3. dnf install ansible-runner-service-dev
4. flow the instruction from thread 'New dependency for development
environment'
The
On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
> Hi everyone,
>
> After I screwed up my dev environment beyond repair I have to set it up
> again and I see something I haven't last time (CentOS 7):
>
> $ sudo yum install ansible-runner-service-dev
> Loaded plugins: fastestmirror
> Loading mirror speeds from cached hostfile
> * base: mirror.hosting90.cz
> * centos-sclo-rh: mirror.hosting90.cz
> * centos-sclo-sclo: mirror.hosting90.cz
> * extras: mirror.hosting90.cz
> * ovirt-master-epel: mirror.hosting90.cz
> * ovirt-master-snapshot: ftp.nluug.nl
> * ovirt-master-snapshot-static: ftp.nluug.nl
> * updates: mirror.hosting90.cz
> No package ansible-runner-service-dev available.
>
> Maybe something's missing from my notes, but where did it go? Should I
add
> some repo?
>
> Fedor
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
>
--
Regards,
Eyal Shenitzky
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>*Red Hat respects your work life balance.
Therefore there is no need to answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
2:57 p.m.
New subject: what's up with ansible-runner-service-dev package?
Hi Sandro,
Thanks for the suggestion, but it seems to not help much.
ansible-runner-service-dev still can't be found, I checked repos that are installed
from https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm and haven't
found similarly names packages either...
$ sudo yum install ansible-runner-service-dev
Loaded plugins: fastestmirror
Repository centos-sclo-rh-release is listed more than once in the configuration
Repository sac-gluster-ansible is listed more than once in the configuration
Determining fastest mirrors
ovirt-4.3-epel/x86_64/metalink
| 30 kB 00:00:00
ovirt-master-epel/x86_64/metalink
| 30 kB 00:00:00
* base: ftp.sh.cvut.cz
* centos-sclo-rh: ftp.sh.cvut.cz
* centos-sclo-sclo: ftp.sh.cvut.cz
* extras: ftp.sh.cvut.cz
* ovirt-4.3-epel: mirror.karneval.cz
* ovirt-4.3-snapshot: ftp.plusline.net
* ovirt-4.3-snapshot-static: ftp.plusline.net
* ovirt-master-epel: mirror.karneval.cz
* ovirt-master-snapshot: ftp.plusline.net
* ovirt-master-snapshot-static: ftp.plusline.net
* updates: ftp.sh.cvut.cz
base
| 3.6 kB 00:00:00
centos-opstools-release
| 2.9 kB 00:00:00
centos-ovirt-common-testing
| 3.4 kB 00:00:00
centos-ovirt44-testing
| 3.4 kB 00:00:00
centos-qemu-ev-release
| 3.4 kB 00:00:00
centos-sclo-rh
| 3.0 kB 00:00:00
centos-sclo-rh-release
| 3.0 kB 00:00:00
centos-sclo-sclo
| 2.9 kB 00:00:00
epel-apache-maven
| 3.3 kB 00:00:00
extras
| 2.9 kB 00:00:00
ovirt-4.3-centos-gluster6
| 2.9 kB 00:00:00
ovirt-4.3-centos-opstools
| 2.9 kB 00:00:00
ovirt-4.3-centos-ovirt43
| 2.9 kB 00:00:00
ovirt-4.3-centos-qemu-ev
| 2.9 kB 00:00:00
ovirt-4.3-epel
| 5.3 kB 00:00:00
ovirt-4.3-snapshot
| 3.0 kB 00:00:00
ovirt-4.3-snapshot-static
| 3.0 kB 00:00:00
ovirt-4.3-virtio-win-latest
| 3.0 kB 00:00:00
ovirt-master-centos-gluster6
| 2.9 kB 00:00:00
ovirt-master-centos-opstools-testing
| 2.9 kB 00:00:00
ovirt-master-epel
| 5.3 kB 00:00:00
ovirt-master-snapshot
| 3.0 kB 00:00:00
ovirt-master-snapshot-static
| 3.0 kB 00:00:00
ovirt-master-virtio-win-latest
| 3.0 kB 00:00:00
ovirtwebui-ovirt-web-ui-master
| 3.0 kB 00:00:00
sac-gluster-ansible
| 3.3 kB 00:00:00
updates
| 2.9 kB 00:00:00
(1/32): base/7/x86_64/group_gz
| 165 kB 00:00:00
(2/32): base/7/x86_64/primary_db
| 6.0 MB 00:00:00
(3/32): centos-sclo-rh/x86_64/primary_db
| 4.2 MB 00:00:00
(4/32): centos-qemu-ev-release/x86_64/primary_db
| 9.3 kB 00:00:00
(5/32): centos-sclo-sclo/x86_64/primary_db
| 344 kB 00:00:00
(6/32): centos-ovirt44-testing/x86_64/primary_db
| 1.1 kB 00:00:01
(7/32): extras/7/x86_64/primary_db
| 164 kB 00:00:00
(8/32): centos-opstools-release/x86_64/primary_db
| 429 kB 00:00:01
(9/32): centos-ovirt-common-testing/x86_64/primary_db
| 101 kB 00:00:01
(10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
| 116 kB 00:00:00
(11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
| 73 kB 00:00:00
(12/32): ovirt-4.3-epel/x86_64/group_gz
| 90 kB 00:00:00
(13/32): epel-apache-maven/x86_64/primary_db
| 5.0 kB 00:00:01
(14/32): ovirt-4.3-epel/x86_64/updateinfo
| 1.0 MB 00:00:00
(15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
| 429 kB 00:00:00
(16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
| 211 kB 00:00:00
(17/32): ovirt-4.3-snapshot-static/7/primary_db
| 3.4 kB 00:00:00
(18/32): ovirt-4.3-snapshot/7/primary_db
| 109 kB 00:00:00
(19/32): ovirt-master-centos-gluster6/x86_64/primary_db
| 116 kB 00:00:00
(20/32): ovirt-4.3-epel/x86_64/primary_db
| 6.7 MB 00:00:00
(21/32): ovirt-master-epel/x86_64/group_gz
| 90 kB 00:00:00
(22/32): ovirt-master-epel/x86_64/updateinfo
| 1.0 MB 00:00:00
(23/32): ovirt-master-snapshot/7/primary_db
| 54 kB 00:00:00
(24/32): ovirt-4.3-virtio-win-latest/primary_db
| 7.6 kB 00:00:01
(25/32): ovirt-master-snapshot-static/7/primary_db
| 4.6 kB 00:00:00
(26/32): ovirt-master-epel/x86_64/primary_db
| 6.7 MB 00:00:00
(27/32): ovirt-master-virtio-win-latest/primary_db
| 7.6 kB 00:00:00
(28/32): centos-sclo-rh-release/x86_64/primary_db
| 4.2 MB 00:00:03
(29/32): updates/7/x86_64/primary_db
| 6.7 MB 00:00:00
(30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
| 611 kB 00:00:01
(31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
| 2.3 kB 00:00:00
(32/32): sac-gluster-ansible/x86_64/primary_db
| 13 kB 00:00:00
No package ansible-runner-service-dev available.
Error: Nothing to do
Fedor
----- Original Message -----
From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Tuesday, March 10, 2020 5:56:53 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <fgavrilo(a)redhat.com>
ha scritto:
Thanks for the response, Eyal!
I already had ovirt-master repo installed, but updated everything just in
case.
I even tried both yum and dnf (since yum on centos was giving me lots of
grief before and I learned their behaviour differs, especially when it
comes to bugs) but none works...
>No package ansible-runner-service-dev available.
>No match for argument: ansible-runner-service-dev
Fedor
Looks like you're trying to install ovirt-master-snapshot on el7.
It won't work.
Master is not supporting el7 anymore.
You can use 4.3 snapshot rpm at :
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm if
you need to stay on el7.
----- Original Message -----
From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "devel" <devel(a)ovirt.org>
Sent: Tuesday, March 10, 2020 2:24:16 PM
Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev
package?
Hi Fedor,
Please try:
1. dnf install
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
2. dnf update
3. dnf install ansible-runner-service-dev
4. flow the instruction from thread 'New dependency for development
environment'
The
On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
> Hi everyone,
>
> After I screwed up my dev environment beyond repair I have to set it up
> again and I see something I haven't last time (CentOS 7):
>
> $ sudo yum install ansible-runner-service-dev
> Loaded plugins: fastestmirror
> Loading mirror speeds from cached hostfile
> * base: mirror.hosting90.cz
> * centos-sclo-rh: mirror.hosting90.cz
> * centos-sclo-sclo: mirror.hosting90.cz
> * extras: mirror.hosting90.cz
> * ovirt-master-epel: mirror.hosting90.cz
> * ovirt-master-snapshot: ftp.nluug.nl
> * ovirt-master-snapshot-static: ftp.nluug.nl
> * updates: mirror.hosting90.cz
> No package ansible-runner-service-dev available.
>
> Maybe something's missing from my notes, but where did it go? Should I
add
> some repo?
>
> Fedor
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
>
--
Regards,
Eyal Shenitzky
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>*Red Hat respects your work life balance.
Therefore there is no need to answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
4:10 p.m.
ansible-runner was added in 4.4, you shouldn't need in 4.3
On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Hi Sandro,
Thanks for the suggestion, but it seems to not help much.
ansible-runner-service-dev still can't be found, I checked repos that are installed
from https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm and haven't
found similarly names packages either...
$ sudo yum install ansible-runner-service-dev
Loaded plugins: fastestmirror
Repository centos-sclo-rh-release is listed more than once in the configuration
Repository sac-gluster-ansible is listed more than once in the configuration
Determining fastest mirrors
ovirt-4.3-epel/x86_64/metalink
| 30 kB 00:00:00
ovirt-master-epel/x86_64/metalink
| 30 kB 00:00:00
* base: ftp.sh.cvut.cz
* centos-sclo-rh: ftp.sh.cvut.cz
* centos-sclo-sclo: ftp.sh.cvut.cz
* extras: ftp.sh.cvut.cz
* ovirt-4.3-epel: mirror.karneval.cz
* ovirt-4.3-snapshot: ftp.plusline.net
* ovirt-4.3-snapshot-static: ftp.plusline.net
* ovirt-master-epel: mirror.karneval.cz
* ovirt-master-snapshot: ftp.plusline.net
* ovirt-master-snapshot-static: ftp.plusline.net
* updates: ftp.sh.cvut.cz
base
| 3.6 kB 00:00:00
centos-opstools-release
| 2.9 kB 00:00:00
centos-ovirt-common-testing
| 3.4 kB 00:00:00
centos-ovirt44-testing
| 3.4 kB 00:00:00
centos-qemu-ev-release
| 3.4 kB 00:00:00
centos-sclo-rh
| 3.0 kB 00:00:00
centos-sclo-rh-release
| 3.0 kB 00:00:00
centos-sclo-sclo
| 2.9 kB 00:00:00
epel-apache-maven
| 3.3 kB 00:00:00
extras
| 2.9 kB 00:00:00
ovirt-4.3-centos-gluster6
| 2.9 kB 00:00:00
ovirt-4.3-centos-opstools
| 2.9 kB 00:00:00
ovirt-4.3-centos-ovirt43
| 2.9 kB 00:00:00
ovirt-4.3-centos-qemu-ev
| 2.9 kB 00:00:00
ovirt-4.3-epel
| 5.3 kB 00:00:00
ovirt-4.3-snapshot
| 3.0 kB 00:00:00
ovirt-4.3-snapshot-static
| 3.0 kB 00:00:00
ovirt-4.3-virtio-win-latest
| 3.0 kB 00:00:00
ovirt-master-centos-gluster6
| 2.9 kB 00:00:00
ovirt-master-centos-opstools-testing
| 2.9 kB 00:00:00
ovirt-master-epel
| 5.3 kB 00:00:00
ovirt-master-snapshot
| 3.0 kB 00:00:00
ovirt-master-snapshot-static
| 3.0 kB 00:00:00
ovirt-master-virtio-win-latest
| 3.0 kB 00:00:00
ovirtwebui-ovirt-web-ui-master
| 3.0 kB 00:00:00
sac-gluster-ansible
| 3.3 kB 00:00:00
updates
| 2.9 kB 00:00:00
(1/32): base/7/x86_64/group_gz
| 165 kB 00:00:00
(2/32): base/7/x86_64/primary_db
| 6.0 MB 00:00:00
(3/32): centos-sclo-rh/x86_64/primary_db
| 4.2 MB 00:00:00
(4/32): centos-qemu-ev-release/x86_64/primary_db
| 9.3 kB 00:00:00
(5/32): centos-sclo-sclo/x86_64/primary_db
| 344 kB 00:00:00
(6/32): centos-ovirt44-testing/x86_64/primary_db
| 1.1 kB 00:00:01
(7/32): extras/7/x86_64/primary_db
| 164 kB 00:00:00
(8/32): centos-opstools-release/x86_64/primary_db
| 429 kB 00:00:01
(9/32): centos-ovirt-common-testing/x86_64/primary_db
| 101 kB 00:00:01
(10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
| 116 kB 00:00:00
(11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
| 73 kB 00:00:00
(12/32): ovirt-4.3-epel/x86_64/group_gz
| 90 kB 00:00:00
(13/32): epel-apache-maven/x86_64/primary_db
| 5.0 kB 00:00:01
(14/32): ovirt-4.3-epel/x86_64/updateinfo
| 1.0 MB 00:00:00
(15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
| 429 kB 00:00:00
(16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
| 211 kB 00:00:00
(17/32): ovirt-4.3-snapshot-static/7/primary_db
| 3.4 kB 00:00:00
(18/32): ovirt-4.3-snapshot/7/primary_db
| 109 kB 00:00:00
(19/32): ovirt-master-centos-gluster6/x86_64/primary_db
| 116 kB 00:00:00
(20/32): ovirt-4.3-epel/x86_64/primary_db
| 6.7 MB 00:00:00
(21/32): ovirt-master-epel/x86_64/group_gz
| 90 kB 00:00:00
(22/32): ovirt-master-epel/x86_64/updateinfo
| 1.0 MB 00:00:00
(23/32): ovirt-master-snapshot/7/primary_db
| 54 kB 00:00:00
(24/32): ovirt-4.3-virtio-win-latest/primary_db
| 7.6 kB 00:00:01
(25/32): ovirt-master-snapshot-static/7/primary_db
| 4.6 kB 00:00:00
(26/32): ovirt-master-epel/x86_64/primary_db
| 6.7 MB 00:00:00
(27/32): ovirt-master-virtio-win-latest/primary_db
| 7.6 kB 00:00:00
(28/32): centos-sclo-rh-release/x86_64/primary_db
| 4.2 MB 00:00:03
(29/32): updates/7/x86_64/primary_db
| 6.7 MB 00:00:00
(30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
| 611 kB 00:00:01
(31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
| 2.3 kB 00:00:00
(32/32): sac-gluster-ansible/x86_64/primary_db
| 13 kB 00:00:00
No package ansible-runner-service-dev available.
Error: Nothing to do
Fedor
----- Original Message -----
From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Tuesday, March 10, 2020 5:56:53 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <fgavrilo(a)redhat.com>
ha scritto:
> Thanks for the response, Eyal!
>
> I already had ovirt-master repo installed, but updated everything just in
> case.
> I even tried both yum and dnf (since yum on centos was giving me lots of
> grief before and I learned their behaviour differs, especially when it
> comes to bugs) but none works...
>
> >No package ansible-runner-service-dev available.
> >No match for argument: ansible-runner-service-dev
>
> Fedor
>
>
Looks like you're trying to install ovirt-master-snapshot on el7.
It won't work.
Master is not supporting el7 anymore.
You can use 4.3 snapshot rpm at :
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm if
you need to stay on el7.
> ----- Original Message -----
> From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "devel" <devel(a)ovirt.org>
> Sent: Tuesday, March 10, 2020 2:24:16 PM
> Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev
> package?
>
> Hi Fedor,
>
> Please try:
> 1. dnf install
> http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> 2. dnf update
> 3. dnf install ansible-runner-service-dev
> 4. flow the instruction from thread 'New dependency for development
> environment'
> The
>
> On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
>
> > Hi everyone,
> >
> > After I screwed up my dev environment beyond repair I have to set it up
> > again and I see something I haven't last time (CentOS 7):
> >
> > $ sudo yum install ansible-runner-service-dev
> > Loaded plugins: fastestmirror
> > Loading mirror speeds from cached hostfile
> > * base: mirror.hosting90.cz
> > * centos-sclo-rh: mirror.hosting90.cz
> > * centos-sclo-sclo: mirror.hosting90.cz
> > * extras: mirror.hosting90.cz
> > * ovirt-master-epel: mirror.hosting90.cz
> > * ovirt-master-snapshot: ftp.nluug.nl
> > * ovirt-master-snapshot-static: ftp.nluug.nl
> > * updates: mirror.hosting90.cz
> > No package ansible-runner-service-dev available.
> >
> > Maybe something's missing from my notes, but where did it go? Should I
> add
> > some repo?
> >
> > Fedor
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> >
>
>
> --
> Regards,
> Eyal Shenitzky
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
>
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>*Red Hat respects your work life balance.
Therefore there is no need to answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
11:28 a.m.
Adding also +Dana Elfassy <delfassy(a)redhat.com>
On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com> wrote:
ansible-runner was added in 4.4, you shouldn't need in 4.3
On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
>
> Hi Sandro,
>
> Thanks for the suggestion, but it seems to not help much.
>
> ansible-runner-service-dev still can't be found, I checked repos that
are installed from
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm and
haven't found similarly names packages either...
>
> $ sudo yum install ansible-runner-service-dev
> Loaded plugins: fastestmirror
> Repository centos-sclo-rh-release is listed more than once in the
configuration
> Repository sac-gluster-ansible is listed more than once in the
configuration
> Determining fastest mirrors
> ovirt-4.3-epel/x86_64/metalink
| 30 kB 00:00:00
> ovirt-master-epel/x86_64/metalink
| 30 kB 00:00:00
> * base: ftp.sh.cvut.cz
> * centos-sclo-rh: ftp.sh.cvut.cz
> * centos-sclo-sclo: ftp.sh.cvut.cz
> * extras: ftp.sh.cvut.cz
> * ovirt-4.3-epel: mirror.karneval.cz
> * ovirt-4.3-snapshot: ftp.plusline.net
> * ovirt-4.3-snapshot-static: ftp.plusline.net
> * ovirt-master-epel: mirror.karneval.cz
> * ovirt-master-snapshot: ftp.plusline.net
> * ovirt-master-snapshot-static: ftp.plusline.net
> * updates: ftp.sh.cvut.cz
> base
| 3.6 kB 00:00:00
> centos-opstools-release
| 2.9 kB 00:00:00
> centos-ovirt-common-testing
| 3.4 kB 00:00:00
> centos-ovirt44-testing
| 3.4 kB 00:00:00
> centos-qemu-ev-release
| 3.4 kB 00:00:00
> centos-sclo-rh
| 3.0 kB 00:00:00
> centos-sclo-rh-release
| 3.0 kB 00:00:00
> centos-sclo-sclo
| 2.9 kB 00:00:00
> epel-apache-maven
| 3.3 kB 00:00:00
> extras
| 2.9 kB 00:00:00
> ovirt-4.3-centos-gluster6
| 2.9 kB 00:00:00
> ovirt-4.3-centos-opstools
| 2.9 kB 00:00:00
> ovirt-4.3-centos-ovirt43
| 2.9 kB 00:00:00
> ovirt-4.3-centos-qemu-ev
| 2.9 kB 00:00:00
> ovirt-4.3-epel
| 5.3 kB 00:00:00
> ovirt-4.3-snapshot
| 3.0 kB 00:00:00
> ovirt-4.3-snapshot-static
| 3.0 kB 00:00:00
> ovirt-4.3-virtio-win-latest
| 3.0 kB 00:00:00
> ovirt-master-centos-gluster6
| 2.9 kB 00:00:00
> ovirt-master-centos-opstools-testing
| 2.9 kB 00:00:00
> ovirt-master-epel
| 5.3 kB 00:00:00
> ovirt-master-snapshot
| 3.0 kB 00:00:00
> ovirt-master-snapshot-static
| 3.0 kB 00:00:00
> ovirt-master-virtio-win-latest
| 3.0 kB 00:00:00
> ovirtwebui-ovirt-web-ui-master
| 3.0 kB 00:00:00
> sac-gluster-ansible
| 3.3 kB 00:00:00
> updates
| 2.9 kB 00:00:00
> (1/32): base/7/x86_64/group_gz
| 165 kB 00:00:00
> (2/32): base/7/x86_64/primary_db
| 6.0 MB 00:00:00
> (3/32): centos-sclo-rh/x86_64/primary_db
| 4.2 MB 00:00:00
> (4/32): centos-qemu-ev-release/x86_64/primary_db
| 9.3 kB 00:00:00
> (5/32): centos-sclo-sclo/x86_64/primary_db
| 344 kB 00:00:00
> (6/32): centos-ovirt44-testing/x86_64/primary_db
| 1.1 kB 00:00:01
> (7/32): extras/7/x86_64/primary_db
| 164 kB 00:00:00
> (8/32): centos-opstools-release/x86_64/primary_db
| 429 kB 00:00:01
> (9/32): centos-ovirt-common-testing/x86_64/primary_db
| 101 kB 00:00:01
> (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
| 116 kB 00:00:00
> (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
| 73 kB 00:00:00
> (12/32): ovirt-4.3-epel/x86_64/group_gz
| 90 kB 00:00:00
> (13/32): epel-apache-maven/x86_64/primary_db
| 5.0 kB 00:00:01
> (14/32): ovirt-4.3-epel/x86_64/updateinfo
| 1.0 MB 00:00:00
> (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
| 429 kB 00:00:00
> (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
| 211 kB 00:00:00
> (17/32): ovirt-4.3-snapshot-static/7/primary_db
| 3.4 kB 00:00:00
> (18/32): ovirt-4.3-snapshot/7/primary_db
| 109 kB 00:00:00
> (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
| 116 kB 00:00:00
> (20/32): ovirt-4.3-epel/x86_64/primary_db
| 6.7 MB 00:00:00
> (21/32): ovirt-master-epel/x86_64/group_gz
| 90 kB 00:00:00
> (22/32): ovirt-master-epel/x86_64/updateinfo
| 1.0 MB 00:00:00
> (23/32): ovirt-master-snapshot/7/primary_db
| 54 kB 00:00:00
> (24/32): ovirt-4.3-virtio-win-latest/primary_db
| 7.6 kB 00:00:01
> (25/32): ovirt-master-snapshot-static/7/primary_db
| 4.6 kB 00:00:00
> (26/32): ovirt-master-epel/x86_64/primary_db
| 6.7 MB 00:00:00
> (27/32): ovirt-master-virtio-win-latest/primary_db
| 7.6 kB 00:00:00
> (28/32): centos-sclo-rh-release/x86_64/primary_db
| 4.2 MB 00:00:03
> (29/32): updates/7/x86_64/primary_db
| 6.7 MB 00:00:00
> (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
| 611 kB 00:00:01
> (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
| 2.3 kB 00:00:00
> (32/32): sac-gluster-ansible/x86_64/primary_db
| 13 kB 00:00:00
> No package ansible-runner-service-dev available.
> Error: Nothing to do
>
>
> Fedor
>
> ----- Original Message -----
> From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Tuesday, March 10, 2020 5:56:53 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
> Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
fgavrilo(a)redhat.com>
> ha scritto:
>
> > Thanks for the response, Eyal!
> >
> > I already had ovirt-master repo installed, but updated everything just
in
> > case.
> > I even tried both yum and dnf (since yum on centos was giving me lots
of
> > grief before and I learned their behaviour differs, especially when it
> > comes to bugs) but none works...
> >
> > >No package ansible-runner-service-dev available.
> > >No match for argument: ansible-runner-service-dev
> >
> > Fedor
> >
> >
> Looks like you're trying to install ovirt-master-snapshot on el7.
> It won't work.
> Master is not supporting el7 anymore.
> You can use 4.3 snapshot rpm at :
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm if
> you need to stay on el7.
>
>
> > ----- Original Message -----
> > From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "devel" <devel(a)ovirt.org>
> > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev
> > package?
> >
> > Hi Fedor,
> >
> > Please try:
> > 1. dnf install
> > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > 2. dnf update
> > 3. dnf install ansible-runner-service-dev
> > 4. flow the instruction from thread 'New dependency for development
> > environment'
> > The
> >
> > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
> >
> > > Hi everyone,
> > >
> > > After I screwed up my dev environment beyond repair I have to set it
up
> > > again and I see something I haven't last time (CentOS 7):
> > >
> > > $ sudo yum install ansible-runner-service-dev
> > > Loaded plugins: fastestmirror
> > > Loading mirror speeds from cached hostfile
> > > * base: mirror.hosting90.cz
> > > * centos-sclo-rh: mirror.hosting90.cz
> > > * centos-sclo-sclo: mirror.hosting90.cz
> > > * extras: mirror.hosting90.cz
> > > * ovirt-master-epel: mirror.hosting90.cz
> > > * ovirt-master-snapshot: ftp.nluug.nl
> > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > * updates: mirror.hosting90.cz
> > > No package ansible-runner-service-dev available.
> > >
> > > Maybe something's missing from my notes, but where did it go? Should
I
> > add
> > > some repo?
> > >
> > > Fedor
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > >
> >
> >
> > --
> > Regards,
> > Eyal Shenitzky
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> >
>
>
> --
>
> Sandro Bonazzola
>
> MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
>
> Red Hat EMEA <https://www.redhat.com/>
>
> sbonazzo(a)redhat.com
> <https://www.redhat.com/>*Red Hat respects your work life balance.
> Therefore there is no need to answer this email out of your office hours.
> <https://mojo.redhat.com/docs/DOC-1199578>*
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
--
Regards,
Eyal Shenitzky
10:11 a.m.
Hi Fedor,
ansible-runner-service-dev package is available from
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
repos which is included in ovirt-master-release package, which
includes all repositories necessary for oVirt development:
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Was your issue resolved or not?
Regards,
Martin
On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com> wrote:
Adding also +Dana Elfassy <delfassy(a)redhat.com>
On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com> wrote:
> ansible-runner was added in 4.4, you shouldn't need in 4.3
>
> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> >
> > Hi Sandro,
> >
> > Thanks for the suggestion, but it seems to not help much.
> >
> > ansible-runner-service-dev still can't be found, I checked repos that
> are installed from
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> and haven't found similarly names packages either...
> >
> > $ sudo yum install ansible-runner-service-dev
> > Loaded plugins: fastestmirror
> > Repository centos-sclo-rh-release is listed more than once in the
> configuration
> > Repository sac-gluster-ansible is listed more than once in the
> configuration
> > Determining fastest mirrors
> > ovirt-4.3-epel/x86_64/metalink
>
> | 30 kB 00:00:00
> > ovirt-master-epel/x86_64/metalink
>
> | 30 kB 00:00:00
> > * base: ftp.sh.cvut.cz
> > * centos-sclo-rh: ftp.sh.cvut.cz
> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > * extras: ftp.sh.cvut.cz
> > * ovirt-4.3-epel: mirror.karneval.cz
> > * ovirt-4.3-snapshot: ftp.plusline.net
> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > * ovirt-master-epel: mirror.karneval.cz
> > * ovirt-master-snapshot: ftp.plusline.net
> > * ovirt-master-snapshot-static: ftp.plusline.net
> > * updates: ftp.sh.cvut.cz
> > base
>
> | 3.6 kB 00:00:00
> > centos-opstools-release
>
> | 2.9 kB 00:00:00
> > centos-ovirt-common-testing
>
> | 3.4 kB 00:00:00
> > centos-ovirt44-testing
>
> | 3.4 kB 00:00:00
> > centos-qemu-ev-release
>
> | 3.4 kB 00:00:00
> > centos-sclo-rh
>
> | 3.0 kB 00:00:00
> > centos-sclo-rh-release
>
> | 3.0 kB 00:00:00
> > centos-sclo-sclo
>
> | 2.9 kB 00:00:00
> > epel-apache-maven
>
> | 3.3 kB 00:00:00
> > extras
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-gluster6
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-opstools
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-ovirt43
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-qemu-ev
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-epel
>
> | 5.3 kB 00:00:00
> > ovirt-4.3-snapshot
>
> | 3.0 kB 00:00:00
> > ovirt-4.3-snapshot-static
>
> | 3.0 kB 00:00:00
> > ovirt-4.3-virtio-win-latest
>
> | 3.0 kB 00:00:00
> > ovirt-master-centos-gluster6
>
> | 2.9 kB 00:00:00
> > ovirt-master-centos-opstools-testing
>
> | 2.9 kB 00:00:00
> > ovirt-master-epel
>
> | 5.3 kB 00:00:00
> > ovirt-master-snapshot
>
> | 3.0 kB 00:00:00
> > ovirt-master-snapshot-static
>
> | 3.0 kB 00:00:00
> > ovirt-master-virtio-win-latest
>
> | 3.0 kB 00:00:00
> > ovirtwebui-ovirt-web-ui-master
>
> | 3.0 kB 00:00:00
> > sac-gluster-ansible
>
> | 3.3 kB 00:00:00
> > updates
>
> | 2.9 kB 00:00:00
> > (1/32): base/7/x86_64/group_gz
>
> | 165 kB 00:00:00
> > (2/32): base/7/x86_64/primary_db
>
> | 6.0 MB 00:00:00
> > (3/32): centos-sclo-rh/x86_64/primary_db
>
> | 4.2 MB 00:00:00
> > (4/32): centos-qemu-ev-release/x86_64/primary_db
>
> | 9.3 kB 00:00:00
> > (5/32): centos-sclo-sclo/x86_64/primary_db
>
> | 344 kB 00:00:00
> > (6/32): centos-ovirt44-testing/x86_64/primary_db
>
> | 1.1 kB 00:00:01
> > (7/32): extras/7/x86_64/primary_db
>
> | 164 kB 00:00:00
> > (8/32): centos-opstools-release/x86_64/primary_db
>
> | 429 kB 00:00:01
> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
>
> | 101 kB 00:00:01
> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
>
> | 116 kB 00:00:00
> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
>
> | 73 kB 00:00:00
> > (12/32): ovirt-4.3-epel/x86_64/group_gz
>
> | 90 kB 00:00:00
> > (13/32): epel-apache-maven/x86_64/primary_db
>
> | 5.0 kB 00:00:01
> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
>
> | 1.0 MB 00:00:00
> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
>
> | 429 kB 00:00:00
> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
>
> | 211 kB 00:00:00
> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
>
> | 3.4 kB 00:00:00
> > (18/32): ovirt-4.3-snapshot/7/primary_db
>
> | 109 kB 00:00:00
> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
>
> | 116 kB 00:00:00
> > (20/32): ovirt-4.3-epel/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (21/32): ovirt-master-epel/x86_64/group_gz
>
> | 90 kB 00:00:00
> > (22/32): ovirt-master-epel/x86_64/updateinfo
>
> | 1.0 MB 00:00:00
> > (23/32): ovirt-master-snapshot/7/primary_db
>
> | 54 kB 00:00:00
> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
>
> | 7.6 kB 00:00:01
> > (25/32): ovirt-master-snapshot-static/7/primary_db
>
> | 4.6 kB 00:00:00
> > (26/32): ovirt-master-epel/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (27/32): ovirt-master-virtio-win-latest/primary_db
>
> | 7.6 kB 00:00:00
> > (28/32): centos-sclo-rh-release/x86_64/primary_db
>
> | 4.2 MB 00:00:03
> > (29/32): updates/7/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
>
> | 611 kB 00:00:01
> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
>
> | 2.3 kB 00:00:00
> > (32/32): sac-gluster-ansible/x86_64/primary_db
>
> | 13 kB 00:00:00
> > No package ansible-runner-service-dev available.
> > Error: Nothing to do
> >
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev package?
> >
> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> fgavrilo(a)redhat.com>
> > ha scritto:
> >
> > > Thanks for the response, Eyal!
> > >
> > > I already had ovirt-master repo installed, but updated everything
> just in
> > > case.
> > > I even tried both yum and dnf (since yum on centos was giving me lots
> of
> > > grief before and I learned their behaviour differs, especially when it
> > > comes to bugs) but none works...
> > >
> > > >No package ansible-runner-service-dev available.
> > > >No match for argument: ansible-runner-service-dev
> > >
> > > Fedor
> > >
> > >
> > Looks like you're trying to install ovirt-master-snapshot on el7.
> > It won't work.
> > Master is not supporting el7 anymore.
> > You can use 4.3 snapshot rpm at :
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> if
> > you need to stay on el7.
> >
> >
> > > ----- Original Message -----
> > > From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > > Cc: "devel" <devel(a)ovirt.org>
> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Hi Fedor,
> > >
> > > Please try:
> > > 1. dnf install
> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > 2. dnf update
> > > 3. dnf install ansible-runner-service-dev
> > > 4. flow the instruction from thread 'New dependency for development
> > > environment'
> > > The
> > >
> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> > >
> > > > Hi everyone,
> > > >
> > > > After I screwed up my dev environment beyond repair I have to set
> it up
> > > > again and I see something I haven't last time (CentOS 7):
> > > >
> > > > $ sudo yum install ansible-runner-service-dev
> > > > Loaded plugins: fastestmirror
> > > > Loading mirror speeds from cached hostfile
> > > > * base: mirror.hosting90.cz
> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > * extras: mirror.hosting90.cz
> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > > * updates: mirror.hosting90.cz
> > > > No package ansible-runner-service-dev available.
> > > >
> > > > Maybe something's missing from my notes, but where did it go?
> Should I
> > > add
> > > > some repo?
> > > >
> > > > Fedor
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > >
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >
> >
> >
> > --
> >
> > Sandro Bonazzola
> >
> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> >
> > Red Hat EMEA <https://www.redhat.com/>
> >
> > sbonazzo(a)redhat.com
> > <https://www.redhat.com/>*Red Hat respects your work life balance.
> > Therefore there is no need to answer this email out of your office
> hours.
> > <https://mojo.redhat.com/docs/DOC-1199578>*
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
>
--
Regards,
Eyal Shenitzky
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
2:37 p.m.
New subject: what's up with ansible-runner-service-dev package?
Hi,
Resolved through installing engine on Fedora 30. From what I understand, CentOS 7 is not
supported anymore.
Fedor
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Benny Zlotnik" <bzlotnik(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>, "Eyal
Shenitzky" <eshenitz(a)redhat.com>
Sent: Monday, March 16, 2020 8:11:35 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
Hi Fedor,
ansible-runner-service-dev package is available from
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
repos which is included in ovirt-master-release package, which
includes all repositories necessary for oVirt development:
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Was your issue resolved or not?
Regards,
Martin
On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com> wrote:
Adding also +Dana Elfassy <delfassy(a)redhat.com>
On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com> wrote:
> ansible-runner was added in 4.4, you shouldn't need in 4.3
>
> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> >
> > Hi Sandro,
> >
> > Thanks for the suggestion, but it seems to not help much.
> >
> > ansible-runner-service-dev still can't be found, I checked repos that
> are installed from
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> and haven't found similarly names packages either...
> >
> > $ sudo yum install ansible-runner-service-dev
> > Loaded plugins: fastestmirror
> > Repository centos-sclo-rh-release is listed more than once in the
> configuration
> > Repository sac-gluster-ansible is listed more than once in the
> configuration
> > Determining fastest mirrors
> > ovirt-4.3-epel/x86_64/metalink
>
> | 30 kB 00:00:00
> > ovirt-master-epel/x86_64/metalink
>
> | 30 kB 00:00:00
> > * base: ftp.sh.cvut.cz
> > * centos-sclo-rh: ftp.sh.cvut.cz
> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > * extras: ftp.sh.cvut.cz
> > * ovirt-4.3-epel: mirror.karneval.cz
> > * ovirt-4.3-snapshot: ftp.plusline.net
> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > * ovirt-master-epel: mirror.karneval.cz
> > * ovirt-master-snapshot: ftp.plusline.net
> > * ovirt-master-snapshot-static: ftp.plusline.net
> > * updates: ftp.sh.cvut.cz
> > base
>
> | 3.6 kB 00:00:00
> > centos-opstools-release
>
> | 2.9 kB 00:00:00
> > centos-ovirt-common-testing
>
> | 3.4 kB 00:00:00
> > centos-ovirt44-testing
>
> | 3.4 kB 00:00:00
> > centos-qemu-ev-release
>
> | 3.4 kB 00:00:00
> > centos-sclo-rh
>
> | 3.0 kB 00:00:00
> > centos-sclo-rh-release
>
> | 3.0 kB 00:00:00
> > centos-sclo-sclo
>
> | 2.9 kB 00:00:00
> > epel-apache-maven
>
> | 3.3 kB 00:00:00
> > extras
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-gluster6
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-opstools
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-ovirt43
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-qemu-ev
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-epel
>
> | 5.3 kB 00:00:00
> > ovirt-4.3-snapshot
>
> | 3.0 kB 00:00:00
> > ovirt-4.3-snapshot-static
>
> | 3.0 kB 00:00:00
> > ovirt-4.3-virtio-win-latest
>
> | 3.0 kB 00:00:00
> > ovirt-master-centos-gluster6
>
> | 2.9 kB 00:00:00
> > ovirt-master-centos-opstools-testing
>
> | 2.9 kB 00:00:00
> > ovirt-master-epel
>
> | 5.3 kB 00:00:00
> > ovirt-master-snapshot
>
> | 3.0 kB 00:00:00
> > ovirt-master-snapshot-static
>
> | 3.0 kB 00:00:00
> > ovirt-master-virtio-win-latest
>
> | 3.0 kB 00:00:00
> > ovirtwebui-ovirt-web-ui-master
>
> | 3.0 kB 00:00:00
> > sac-gluster-ansible
>
> | 3.3 kB 00:00:00
> > updates
>
> | 2.9 kB 00:00:00
> > (1/32): base/7/x86_64/group_gz
>
> | 165 kB 00:00:00
> > (2/32): base/7/x86_64/primary_db
>
> | 6.0 MB 00:00:00
> > (3/32): centos-sclo-rh/x86_64/primary_db
>
> | 4.2 MB 00:00:00
> > (4/32): centos-qemu-ev-release/x86_64/primary_db
>
> | 9.3 kB 00:00:00
> > (5/32): centos-sclo-sclo/x86_64/primary_db
>
> | 344 kB 00:00:00
> > (6/32): centos-ovirt44-testing/x86_64/primary_db
>
> | 1.1 kB 00:00:01
> > (7/32): extras/7/x86_64/primary_db
>
> | 164 kB 00:00:00
> > (8/32): centos-opstools-release/x86_64/primary_db
>
> | 429 kB 00:00:01
> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
>
> | 101 kB 00:00:01
> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
>
> | 116 kB 00:00:00
> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
>
> | 73 kB 00:00:00
> > (12/32): ovirt-4.3-epel/x86_64/group_gz
>
> | 90 kB 00:00:00
> > (13/32): epel-apache-maven/x86_64/primary_db
>
> | 5.0 kB 00:00:01
> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
>
> | 1.0 MB 00:00:00
> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
>
> | 429 kB 00:00:00
> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
>
> | 211 kB 00:00:00
> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
>
> | 3.4 kB 00:00:00
> > (18/32): ovirt-4.3-snapshot/7/primary_db
>
> | 109 kB 00:00:00
> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
>
> | 116 kB 00:00:00
> > (20/32): ovirt-4.3-epel/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (21/32): ovirt-master-epel/x86_64/group_gz
>
> | 90 kB 00:00:00
> > (22/32): ovirt-master-epel/x86_64/updateinfo
>
> | 1.0 MB 00:00:00
> > (23/32): ovirt-master-snapshot/7/primary_db
>
> | 54 kB 00:00:00
> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
>
> | 7.6 kB 00:00:01
> > (25/32): ovirt-master-snapshot-static/7/primary_db
>
> | 4.6 kB 00:00:00
> > (26/32): ovirt-master-epel/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (27/32): ovirt-master-virtio-win-latest/primary_db
>
> | 7.6 kB 00:00:00
> > (28/32): centos-sclo-rh-release/x86_64/primary_db
>
> | 4.2 MB 00:00:03
> > (29/32): updates/7/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
>
> | 611 kB 00:00:01
> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
>
> | 2.3 kB 00:00:00
> > (32/32): sac-gluster-ansible/x86_64/primary_db
>
> | 13 kB 00:00:00
> > No package ansible-runner-service-dev available.
> > Error: Nothing to do
> >
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev package?
> >
> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> fgavrilo(a)redhat.com>
> > ha scritto:
> >
> > > Thanks for the response, Eyal!
> > >
> > > I already had ovirt-master repo installed, but updated everything
> just in
> > > case.
> > > I even tried both yum and dnf (since yum on centos was giving me lots
> of
> > > grief before and I learned their behaviour differs, especially when it
> > > comes to bugs) but none works...
> > >
> > > >No package ansible-runner-service-dev available.
> > > >No match for argument: ansible-runner-service-dev
> > >
> > > Fedor
> > >
> > >
> > Looks like you're trying to install ovirt-master-snapshot on el7.
> > It won't work.
> > Master is not supporting el7 anymore.
> > You can use 4.3 snapshot rpm at :
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> if
> > you need to stay on el7.
> >
> >
> > > ----- Original Message -----
> > > From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > > Cc: "devel" <devel(a)ovirt.org>
> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Hi Fedor,
> > >
> > > Please try:
> > > 1. dnf install
> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > 2. dnf update
> > > 3. dnf install ansible-runner-service-dev
> > > 4. flow the instruction from thread 'New dependency for development
> > > environment'
> > > The
> > >
> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> > >
> > > > Hi everyone,
> > > >
> > > > After I screwed up my dev environment beyond repair I have to set
> it up
> > > > again and I see something I haven't last time (CentOS 7):
> > > >
> > > > $ sudo yum install ansible-runner-service-dev
> > > > Loaded plugins: fastestmirror
> > > > Loading mirror speeds from cached hostfile
> > > > * base: mirror.hosting90.cz
> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > * extras: mirror.hosting90.cz
> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > > * updates: mirror.hosting90.cz
> > > > No package ansible-runner-service-dev available.
> > > >
> > > > Maybe something's missing from my notes, but where did it go?
> Should I
> > > add
> > > > some repo?
> > > >
> > > > Fedor
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > >
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >
> >
> >
> > --
> >
> > Sandro Bonazzola
> >
> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> >
> > Red Hat EMEA <https://www.redhat.com/>
> >
> > sbonazzo(a)redhat.com
> > <https://www.redhat.com/>*Red Hat respects your work life balance.
> > Therefore there is no need to answer this email out of your office
> hours.
> > <https://mojo.redhat.com/docs/DOC-1199578>*
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
>
--
Regards,
Eyal Shenitzky
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
4:53 p.m.
New subject: what's up with ansible-runner-service-dev package?
Actually, it was too early for me to celebrate.
On Fedora 30, the engine compiles and runs fine, but when I try adding the host
installation fails almost immediately and I get the following errors in the engine logs:
ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
(EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation failed for host
'6402d350-69de-4181-bfc1-50e0e79c8228', 'banana': Failed to execute
Ansible host-deploy role: Internal server error, please check Ansible runner error log..
Please check logs for more details:
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
There is nothing else. There is no file
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
Snapshot I'm using for the host is the same that worked just fine when engine was
running on CentOS 7 and is CentOS 7 itself. Is that an issue?
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 12:37:44 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
Hi,
Resolved through installing engine on Fedora 30. From what I understand, CentOS 7 is not
supported anymore.
Fedor
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Benny Zlotnik" <bzlotnik(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>, "Eyal
Shenitzky" <eshenitz(a)redhat.com>
Sent: Monday, March 16, 2020 8:11:35 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
Hi Fedor,
ansible-runner-service-dev package is available from
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
repos which is included in ovirt-master-release package, which
includes all repositories necessary for oVirt development:
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Was your issue resolved or not?
Regards,
Martin
On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com> wrote:
Adding also +Dana Elfassy <delfassy(a)redhat.com>
On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com> wrote:
> ansible-runner was added in 4.4, you shouldn't need in 4.3
>
> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> >
> > Hi Sandro,
> >
> > Thanks for the suggestion, but it seems to not help much.
> >
> > ansible-runner-service-dev still can't be found, I checked repos that
> are installed from
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> and haven't found similarly names packages either...
> >
> > $ sudo yum install ansible-runner-service-dev
> > Loaded plugins: fastestmirror
> > Repository centos-sclo-rh-release is listed more than once in the
> configuration
> > Repository sac-gluster-ansible is listed more than once in the
> configuration
> > Determining fastest mirrors
> > ovirt-4.3-epel/x86_64/metalink
>
> | 30 kB 00:00:00
> > ovirt-master-epel/x86_64/metalink
>
> | 30 kB 00:00:00
> > * base: ftp.sh.cvut.cz
> > * centos-sclo-rh: ftp.sh.cvut.cz
> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > * extras: ftp.sh.cvut.cz
> > * ovirt-4.3-epel: mirror.karneval.cz
> > * ovirt-4.3-snapshot: ftp.plusline.net
> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > * ovirt-master-epel: mirror.karneval.cz
> > * ovirt-master-snapshot: ftp.plusline.net
> > * ovirt-master-snapshot-static: ftp.plusline.net
> > * updates: ftp.sh.cvut.cz
> > base
>
> | 3.6 kB 00:00:00
> > centos-opstools-release
>
> | 2.9 kB 00:00:00
> > centos-ovirt-common-testing
>
> | 3.4 kB 00:00:00
> > centos-ovirt44-testing
>
> | 3.4 kB 00:00:00
> > centos-qemu-ev-release
>
> | 3.4 kB 00:00:00
> > centos-sclo-rh
>
> | 3.0 kB 00:00:00
> > centos-sclo-rh-release
>
> | 3.0 kB 00:00:00
> > centos-sclo-sclo
>
> | 2.9 kB 00:00:00
> > epel-apache-maven
>
> | 3.3 kB 00:00:00
> > extras
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-gluster6
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-opstools
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-ovirt43
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-centos-qemu-ev
>
> | 2.9 kB 00:00:00
> > ovirt-4.3-epel
>
> | 5.3 kB 00:00:00
> > ovirt-4.3-snapshot
>
> | 3.0 kB 00:00:00
> > ovirt-4.3-snapshot-static
>
> | 3.0 kB 00:00:00
> > ovirt-4.3-virtio-win-latest
>
> | 3.0 kB 00:00:00
> > ovirt-master-centos-gluster6
>
> | 2.9 kB 00:00:00
> > ovirt-master-centos-opstools-testing
>
> | 2.9 kB 00:00:00
> > ovirt-master-epel
>
> | 5.3 kB 00:00:00
> > ovirt-master-snapshot
>
> | 3.0 kB 00:00:00
> > ovirt-master-snapshot-static
>
> | 3.0 kB 00:00:00
> > ovirt-master-virtio-win-latest
>
> | 3.0 kB 00:00:00
> > ovirtwebui-ovirt-web-ui-master
>
> | 3.0 kB 00:00:00
> > sac-gluster-ansible
>
> | 3.3 kB 00:00:00
> > updates
>
> | 2.9 kB 00:00:00
> > (1/32): base/7/x86_64/group_gz
>
> | 165 kB 00:00:00
> > (2/32): base/7/x86_64/primary_db
>
> | 6.0 MB 00:00:00
> > (3/32): centos-sclo-rh/x86_64/primary_db
>
> | 4.2 MB 00:00:00
> > (4/32): centos-qemu-ev-release/x86_64/primary_db
>
> | 9.3 kB 00:00:00
> > (5/32): centos-sclo-sclo/x86_64/primary_db
>
> | 344 kB 00:00:00
> > (6/32): centos-ovirt44-testing/x86_64/primary_db
>
> | 1.1 kB 00:00:01
> > (7/32): extras/7/x86_64/primary_db
>
> | 164 kB 00:00:00
> > (8/32): centos-opstools-release/x86_64/primary_db
>
> | 429 kB 00:00:01
> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
>
> | 101 kB 00:00:01
> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
>
> | 116 kB 00:00:00
> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
>
> | 73 kB 00:00:00
> > (12/32): ovirt-4.3-epel/x86_64/group_gz
>
> | 90 kB 00:00:00
> > (13/32): epel-apache-maven/x86_64/primary_db
>
> | 5.0 kB 00:00:01
> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
>
> | 1.0 MB 00:00:00
> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
>
> | 429 kB 00:00:00
> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
>
> | 211 kB 00:00:00
> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
>
> | 3.4 kB 00:00:00
> > (18/32): ovirt-4.3-snapshot/7/primary_db
>
> | 109 kB 00:00:00
> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
>
> | 116 kB 00:00:00
> > (20/32): ovirt-4.3-epel/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (21/32): ovirt-master-epel/x86_64/group_gz
>
> | 90 kB 00:00:00
> > (22/32): ovirt-master-epel/x86_64/updateinfo
>
> | 1.0 MB 00:00:00
> > (23/32): ovirt-master-snapshot/7/primary_db
>
> | 54 kB 00:00:00
> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
>
> | 7.6 kB 00:00:01
> > (25/32): ovirt-master-snapshot-static/7/primary_db
>
> | 4.6 kB 00:00:00
> > (26/32): ovirt-master-epel/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (27/32): ovirt-master-virtio-win-latest/primary_db
>
> | 7.6 kB 00:00:00
> > (28/32): centos-sclo-rh-release/x86_64/primary_db
>
> | 4.2 MB 00:00:03
> > (29/32): updates/7/x86_64/primary_db
>
> | 6.7 MB 00:00:00
> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
>
> | 611 kB 00:00:01
> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
>
> | 2.3 kB 00:00:00
> > (32/32): sac-gluster-ansible/x86_64/primary_db
>
> | 13 kB 00:00:00
> > No package ansible-runner-service-dev available.
> > Error: Nothing to do
> >
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev package?
> >
> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> fgavrilo(a)redhat.com>
> > ha scritto:
> >
> > > Thanks for the response, Eyal!
> > >
> > > I already had ovirt-master repo installed, but updated everything
> just in
> > > case.
> > > I even tried both yum and dnf (since yum on centos was giving me lots
> of
> > > grief before and I learned their behaviour differs, especially when it
> > > comes to bugs) but none works...
> > >
> > > >No package ansible-runner-service-dev available.
> > > >No match for argument: ansible-runner-service-dev
> > >
> > > Fedor
> > >
> > >
> > Looks like you're trying to install ovirt-master-snapshot on el7.
> > It won't work.
> > Master is not supporting el7 anymore.
> > You can use 4.3 snapshot rpm at :
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> if
> > you need to stay on el7.
> >
> >
> > > ----- Original Message -----
> > > From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > > Cc: "devel" <devel(a)ovirt.org>
> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > Subject: Re: [ovirt-devel] what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Hi Fedor,
> > >
> > > Please try:
> > > 1. dnf install
> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > 2. dnf update
> > > 3. dnf install ansible-runner-service-dev
> > > 4. flow the instruction from thread 'New dependency for development
> > > environment'
> > > The
> > >
> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> > >
> > > > Hi everyone,
> > > >
> > > > After I screwed up my dev environment beyond repair I have to set
> it up
> > > > again and I see something I haven't last time (CentOS 7):
> > > >
> > > > $ sudo yum install ansible-runner-service-dev
> > > > Loaded plugins: fastestmirror
> > > > Loading mirror speeds from cached hostfile
> > > > * base: mirror.hosting90.cz
> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > * extras: mirror.hosting90.cz
> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > > * updates: mirror.hosting90.cz
> > > > No package ansible-runner-service-dev available.
> > > >
> > > > Maybe something's missing from my notes, but where did it go?
> Should I
> > > add
> > > > some repo?
> > > >
> > > > Fedor
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > >
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >
> >
> >
> > --
> >
> > Sandro Bonazzola
> >
> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> >
> > Red Hat EMEA <https://www.redhat.com/>
> >
> > sbonazzo(a)redhat.com
> > <https://www.redhat.com/>*Red Hat respects your work life balance.
> > Therefore there is no need to answer this email out of your office
> hours.
> > <https://mojo.redhat.com/docs/DOC-1199578>*
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
>
--
Regards,
Eyal Shenitzky
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
4:56 p.m.
On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Actually, it was too early for me to celebrate.
On Fedora 30, the engine compiles and runs fine, but when I try adding the
host installation fails almost immediately and I get the following errors
in the engine logs:
ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
(EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana': Failed
to
execute Ansible host-deploy role: Internal server error, please check
Ansible runner error log.. Please check logs for more details:
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
There is nothing else. There is no file
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
Snapshot I'm using for the host is the same that worked just fine when
engine was running on CentOS 7 and is CentOS 7 itself. Is that an issue?
As you mentioned building engine I assume you are using engine in dev env
on FC30, right? If so, have you manually configured ansible-runner-service
for dev env as mentioned in
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
?
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 12:37:44 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Hi,
Resolved through installing engine on Fedora 30. From what I understand,
CentOS 7 is not supported anymore.
Fedor
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Benny Zlotnik" <bzlotnik(a)redhat.com>, "Dana Elfassy" <
delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>, "Eyal
Shenitzky" <
eshenitz(a)redhat.com>
Sent: Monday, March 16, 2020 8:11:35 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Hi Fedor,
ansible-runner-service-dev package is available from
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
repos which is included in ovirt-master-release package, which
includes all repositories necessary for oVirt development:
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Was your issue resolved or not?
Regards,
Martin
On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com>
wrote:
> Adding also +Dana Elfassy <delfassy(a)redhat.com>
>
> On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com> wrote:
>
>> ansible-runner was added in 4.4, you shouldn't need in 4.3
>>
>> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
>> wrote:
>> >
>> > Hi Sandro,
>> >
>> > Thanks for the suggestion, but it seems to not help much.
>> >
>> > ansible-runner-service-dev still can't be found, I checked repos that
>> are installed from
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
>> and haven't found similarly names packages either...
>> >
>> > $ sudo yum install ansible-runner-service-dev
>> > Loaded plugins: fastestmirror
>> > Repository centos-sclo-rh-release is listed more than once in the
>> configuration
>> > Repository sac-gluster-ansible is listed more than once in the
>> configuration
>> > Determining fastest mirrors
>> > ovirt-4.3-epel/x86_64/metalink
>>
>> | 30 kB 00:00:00
>> > ovirt-master-epel/x86_64/metalink
>>
>> | 30 kB 00:00:00
>> > * base: ftp.sh.cvut.cz
>> > * centos-sclo-rh: ftp.sh.cvut.cz
>> > * centos-sclo-sclo: ftp.sh.cvut.cz
>> > * extras: ftp.sh.cvut.cz
>> > * ovirt-4.3-epel: mirror.karneval.cz
>> > * ovirt-4.3-snapshot: ftp.plusline.net
>> > * ovirt-4.3-snapshot-static: ftp.plusline.net
>> > * ovirt-master-epel: mirror.karneval.cz
>> > * ovirt-master-snapshot: ftp.plusline.net
>> > * ovirt-master-snapshot-static: ftp.plusline.net
>> > * updates: ftp.sh.cvut.cz
>> > base
>>
>> | 3.6 kB 00:00:00
>> > centos-opstools-release
>>
>> | 2.9 kB 00:00:00
>> > centos-ovirt-common-testing
>>
>> | 3.4 kB 00:00:00
>> > centos-ovirt44-testing
>>
>> | 3.4 kB 00:00:00
>> > centos-qemu-ev-release
>>
>> | 3.4 kB 00:00:00
>> > centos-sclo-rh
>>
>> | 3.0 kB 00:00:00
>> > centos-sclo-rh-release
>>
>> | 3.0 kB 00:00:00
>> > centos-sclo-sclo
>>
>> | 2.9 kB 00:00:00
>> > epel-apache-maven
>>
>> | 3.3 kB 00:00:00
>> > extras
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-centos-gluster6
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-centos-opstools
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-centos-ovirt43
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-centos-qemu-ev
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-epel
>>
>> | 5.3 kB 00:00:00
>> > ovirt-4.3-snapshot
>>
>> | 3.0 kB 00:00:00
>> > ovirt-4.3-snapshot-static
>>
>> | 3.0 kB 00:00:00
>> > ovirt-4.3-virtio-win-latest
>>
>> | 3.0 kB 00:00:00
>> > ovirt-master-centos-gluster6
>>
>> | 2.9 kB 00:00:00
>> > ovirt-master-centos-opstools-testing
>>
>> | 2.9 kB 00:00:00
>> > ovirt-master-epel
>>
>> | 5.3 kB 00:00:00
>> > ovirt-master-snapshot
>>
>> | 3.0 kB 00:00:00
>> > ovirt-master-snapshot-static
>>
>> | 3.0 kB 00:00:00
>> > ovirt-master-virtio-win-latest
>>
>> | 3.0 kB 00:00:00
>> > ovirtwebui-ovirt-web-ui-master
>>
>> | 3.0 kB 00:00:00
>> > sac-gluster-ansible
>>
>> | 3.3 kB 00:00:00
>> > updates
>>
>> | 2.9 kB 00:00:00
>> > (1/32): base/7/x86_64/group_gz
>>
>> | 165 kB 00:00:00
>> > (2/32): base/7/x86_64/primary_db
>>
>> | 6.0 MB 00:00:00
>> > (3/32): centos-sclo-rh/x86_64/primary_db
>>
>> | 4.2 MB 00:00:00
>> > (4/32): centos-qemu-ev-release/x86_64/primary_db
>>
>> | 9.3 kB 00:00:00
>> > (5/32): centos-sclo-sclo/x86_64/primary_db
>>
>> | 344 kB 00:00:00
>> > (6/32): centos-ovirt44-testing/x86_64/primary_db
>>
>> | 1.1 kB 00:00:01
>> > (7/32): extras/7/x86_64/primary_db
>>
>> | 164 kB 00:00:00
>> > (8/32): centos-opstools-release/x86_64/primary_db
>>
>> | 429 kB 00:00:01
>> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
>>
>> | 101 kB 00:00:01
>> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
>>
>> | 116 kB 00:00:00
>> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
>>
>> | 73 kB 00:00:00
>> > (12/32): ovirt-4.3-epel/x86_64/group_gz
>>
>> | 90 kB 00:00:00
>> > (13/32): epel-apache-maven/x86_64/primary_db
>>
>> | 5.0 kB 00:00:01
>> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
>>
>> | 1.0 MB 00:00:00
>> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
>>
>> | 429 kB 00:00:00
>> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
>>
>> | 211 kB 00:00:00
>> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
>>
>> | 3.4 kB 00:00:00
>> > (18/32): ovirt-4.3-snapshot/7/primary_db
>>
>> | 109 kB 00:00:00
>> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
>>
>> | 116 kB 00:00:00
>> > (20/32): ovirt-4.3-epel/x86_64/primary_db
>>
>> | 6.7 MB 00:00:00
>> > (21/32): ovirt-master-epel/x86_64/group_gz
>>
>> | 90 kB 00:00:00
>> > (22/32): ovirt-master-epel/x86_64/updateinfo
>>
>> | 1.0 MB 00:00:00
>> > (23/32): ovirt-master-snapshot/7/primary_db
>>
>> | 54 kB 00:00:00
>> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
>>
>> | 7.6 kB 00:00:01
>> > (25/32): ovirt-master-snapshot-static/7/primary_db
>>
>> | 4.6 kB 00:00:00
>> > (26/32): ovirt-master-epel/x86_64/primary_db
>>
>> | 6.7 MB 00:00:00
>> > (27/32): ovirt-master-virtio-win-latest/primary_db
>>
>> | 7.6 kB 00:00:00
>> > (28/32): centos-sclo-rh-release/x86_64/primary_db
>>
>> | 4.2 MB 00:00:03
>> > (29/32): updates/7/x86_64/primary_db
>>
>> | 6.7 MB 00:00:00
>> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
>>
>> | 611 kB 00:00:01
>> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
>>
>> | 2.3 kB 00:00:00
>> > (32/32): sac-gluster-ansible/x86_64/primary_db
>>
>> | 13 kB 00:00:00
>> > No package ansible-runner-service-dev available.
>> > Error: Nothing to do
>> >
>> >
>> > Fedor
>> >
>> > ----- Original Message -----
>> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
>> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>,
"devel" <devel(a)ovirt.org>
>> > Sent: Tuesday, March 10, 2020 5:56:53 PM
>> > Subject: Re: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev package?
>> >
>> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
>> fgavrilo(a)redhat.com>
>> > ha scritto:
>> >
>> > > Thanks for the response, Eyal!
>> > >
>> > > I already had ovirt-master repo installed, but updated everything
>> just in
>> > > case.
>> > > I even tried both yum and dnf (since yum on centos was giving me
lots
>> of
>> > > grief before and I learned their behaviour differs, especially when
it
>> > > comes to bugs) but none works...
>> > >
>> > > >No package ansible-runner-service-dev available.
>> > > >No match for argument: ansible-runner-service-dev
>> > >
>> > > Fedor
>> > >
>> > >
>> > Looks like you're trying to install ovirt-master-snapshot on el7.
>> > It won't work.
>> > Master is not supporting el7 anymore.
>> > You can use 4.3 snapshot rpm at :
>> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
>> if
>> > you need to stay on el7.
>> >
>> >
>> > > ----- Original Message -----
>> > > From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
>> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> > > Cc: "devel" <devel(a)ovirt.org>
>> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
>> > > Subject: Re: [ovirt-devel] what's up with
ansible-runner-service-dev
>> > > package?
>> > >
>> > > Hi Fedor,
>> > >
>> > > Please try:
>> > > 1. dnf install
>> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>> > > 2. dnf update
>> > > 3. dnf install ansible-runner-service-dev
>> > > 4. flow the instruction from thread 'New dependency for
development
>> > > environment'
>> > > The
>> > >
>> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov
<fgavrilo(a)redhat.com>
>> wrote:
>> > >
>> > > > Hi everyone,
>> > > >
>> > > > After I screwed up my dev environment beyond repair I have to
set
>> it up
>> > > > again and I see something I haven't last time (CentOS 7):
>> > > >
>> > > > $ sudo yum install ansible-runner-service-dev
>> > > > Loaded plugins: fastestmirror
>> > > > Loading mirror speeds from cached hostfile
>> > > > * base: mirror.hosting90.cz
>> > > > * centos-sclo-rh: mirror.hosting90.cz
>> > > > * centos-sclo-sclo: mirror.hosting90.cz
>> > > > * extras: mirror.hosting90.cz
>> > > > * ovirt-master-epel: mirror.hosting90.cz
>> > > > * ovirt-master-snapshot: ftp.nluug.nl
>> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
>> > > > * updates: mirror.hosting90.cz
>> > > > No package ansible-runner-service-dev available.
>> > > >
>> > > > Maybe something's missing from my notes, but where did it
go?
>> Should I
>> > > add
>> > > > some repo?
>> > > >
>> > > > Fedor
>> > > > _______________________________________________
>> > > > Devel mailing list -- devel(a)ovirt.org
>> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > > oVirt Code of Conduct:
>> > > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > List Archives:
>> > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
>> > > >
>> > >
>> > >
>> > > --
>> > > Regards,
>> > > Eyal Shenitzky
>> > > _______________________________________________
>> > > Devel mailing list -- devel(a)ovirt.org
>> > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
>> > >
>> >
>> >
>> > --
>> >
>> > Sandro Bonazzola
>> >
>> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
>> >
>> > Red Hat EMEA <https://www.redhat.com/>
>> >
>> > sbonazzo(a)redhat.com
>> > <https://www.redhat.com/>*Red Hat respects your work life balance.
>> > Therefore there is no need to answer this email out of your office
>> hours.
>> > <https://mojo.redhat.com/docs/DOC-1199578>*
>> > _______________________________________________
>> > Devel mailing list -- devel(a)ovirt.org
>> > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> > List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
>> _______________________________________________
>> Devel mailing list -- devel(a)ovirt.org
>> To unsubscribe send an email to devel-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
>>
>
>
> --
> Regards,
> Eyal Shenitzky
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
5:09 p.m.
New subject: what's up with ansible-runner-service-dev package?
FC30 dev env engine indeed :) I've done this before on other OS, so unless there is a
blindspot somewhere in my eye it should be configured fine.
[apple@apple ~]$ sudo systemctl status ansible-runner-service
● ansible-runner-service.service - Ansible Runner Service
Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service; enabled; vendor
preset: disabled)
Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
Main PID: 909 (gunicorn-3)
Tasks: 9 (limit: 4915)
Memory: 193.4M
CGroup: /system.slice/ansible-runner-service.service
├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2
runner_service.wsgi:application
├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2
runner_service.wsgi:application
├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2
runner_service.wsgi:application
├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook --private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook --private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
└─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
StrictHostKeyChecking=no -o Port=22 -o
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
-o KbdInteractiveAu>
And the config:
---
version: 1
# playbooks_root_dir
# location of the playbooks that the service will start
playbooks_root_dir:
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
# port
# tcp port for the service to listen to
port: 50001
#
# ip_address
# Specific IP address to bind to
# ip_address: '0.0.0.0'
target_user: root
#event_cache_size: 3
ssh_private_key:
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
/home/apple/ovirt-engine is where engine is dev-installed. Not sure what else to check
now...
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 2:56:59 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Actually, it was too early for me to celebrate.
On Fedora 30, the engine compiles and runs fine, but when I try adding the
host installation fails almost immediately and I get the following errors
in the engine logs:
ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
(EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana': Failed
to
execute Ansible host-deploy role: Internal server error, please check
Ansible runner error log.. Please check logs for more details:
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
There is nothing else. There is no file
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
Snapshot I'm using for the host is the same that worked just fine when
engine was running on CentOS 7 and is CentOS 7 itself. Is that an issue?
As you mentioned building engine I assume you are using engine in dev env
on FC30, right? If so, have you manually configured ansible-runner-service
for dev env as mentioned in
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
?
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 12:37:44 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Hi,
Resolved through installing engine on Fedora 30. From what I understand,
CentOS 7 is not supported anymore.
Fedor
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Benny Zlotnik" <bzlotnik(a)redhat.com>, "Dana Elfassy" <
delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>, "Eyal
Shenitzky" <
eshenitz(a)redhat.com>
Sent: Monday, March 16, 2020 8:11:35 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Hi Fedor,
ansible-runner-service-dev package is available from
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
repos which is included in ovirt-master-release package, which
includes all repositories necessary for oVirt development:
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Was your issue resolved or not?
Regards,
Martin
On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com>
wrote:
> Adding also +Dana Elfassy <delfassy(a)redhat.com>
>
> On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com> wrote:
>
>> ansible-runner was added in 4.4, you shouldn't need in 4.3
>>
>> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
>> wrote:
>> >
>> > Hi Sandro,
>> >
>> > Thanks for the suggestion, but it seems to not help much.
>> >
>> > ansible-runner-service-dev still can't be found, I checked repos that
>> are installed from
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
>> and haven't found similarly names packages either...
>> >
>> > $ sudo yum install ansible-runner-service-dev
>> > Loaded plugins: fastestmirror
>> > Repository centos-sclo-rh-release is listed more than once in the
>> configuration
>> > Repository sac-gluster-ansible is listed more than once in the
>> configuration
>> > Determining fastest mirrors
>> > ovirt-4.3-epel/x86_64/metalink
>>
>> | 30 kB 00:00:00
>> > ovirt-master-epel/x86_64/metalink
>>
>> | 30 kB 00:00:00
>> > * base: ftp.sh.cvut.cz
>> > * centos-sclo-rh: ftp.sh.cvut.cz
>> > * centos-sclo-sclo: ftp.sh.cvut.cz
>> > * extras: ftp.sh.cvut.cz
>> > * ovirt-4.3-epel: mirror.karneval.cz
>> > * ovirt-4.3-snapshot: ftp.plusline.net
>> > * ovirt-4.3-snapshot-static: ftp.plusline.net
>> > * ovirt-master-epel: mirror.karneval.cz
>> > * ovirt-master-snapshot: ftp.plusline.net
>> > * ovirt-master-snapshot-static: ftp.plusline.net
>> > * updates: ftp.sh.cvut.cz
>> > base
>>
>> | 3.6 kB 00:00:00
>> > centos-opstools-release
>>
>> | 2.9 kB 00:00:00
>> > centos-ovirt-common-testing
>>
>> | 3.4 kB 00:00:00
>> > centos-ovirt44-testing
>>
>> | 3.4 kB 00:00:00
>> > centos-qemu-ev-release
>>
>> | 3.4 kB 00:00:00
>> > centos-sclo-rh
>>
>> | 3.0 kB 00:00:00
>> > centos-sclo-rh-release
>>
>> | 3.0 kB 00:00:00
>> > centos-sclo-sclo
>>
>> | 2.9 kB 00:00:00
>> > epel-apache-maven
>>
>> | 3.3 kB 00:00:00
>> > extras
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-centos-gluster6
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-centos-opstools
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-centos-ovirt43
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-centos-qemu-ev
>>
>> | 2.9 kB 00:00:00
>> > ovirt-4.3-epel
>>
>> | 5.3 kB 00:00:00
>> > ovirt-4.3-snapshot
>>
>> | 3.0 kB 00:00:00
>> > ovirt-4.3-snapshot-static
>>
>> | 3.0 kB 00:00:00
>> > ovirt-4.3-virtio-win-latest
>>
>> | 3.0 kB 00:00:00
>> > ovirt-master-centos-gluster6
>>
>> | 2.9 kB 00:00:00
>> > ovirt-master-centos-opstools-testing
>>
>> | 2.9 kB 00:00:00
>> > ovirt-master-epel
>>
>> | 5.3 kB 00:00:00
>> > ovirt-master-snapshot
>>
>> | 3.0 kB 00:00:00
>> > ovirt-master-snapshot-static
>>
>> | 3.0 kB 00:00:00
>> > ovirt-master-virtio-win-latest
>>
>> | 3.0 kB 00:00:00
>> > ovirtwebui-ovirt-web-ui-master
>>
>> | 3.0 kB 00:00:00
>> > sac-gluster-ansible
>>
>> | 3.3 kB 00:00:00
>> > updates
>>
>> | 2.9 kB 00:00:00
>> > (1/32): base/7/x86_64/group_gz
>>
>> | 165 kB 00:00:00
>> > (2/32): base/7/x86_64/primary_db
>>
>> | 6.0 MB 00:00:00
>> > (3/32): centos-sclo-rh/x86_64/primary_db
>>
>> | 4.2 MB 00:00:00
>> > (4/32): centos-qemu-ev-release/x86_64/primary_db
>>
>> | 9.3 kB 00:00:00
>> > (5/32): centos-sclo-sclo/x86_64/primary_db
>>
>> | 344 kB 00:00:00
>> > (6/32): centos-ovirt44-testing/x86_64/primary_db
>>
>> | 1.1 kB 00:00:01
>> > (7/32): extras/7/x86_64/primary_db
>>
>> | 164 kB 00:00:00
>> > (8/32): centos-opstools-release/x86_64/primary_db
>>
>> | 429 kB 00:00:01
>> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
>>
>> | 101 kB 00:00:01
>> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
>>
>> | 116 kB 00:00:00
>> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
>>
>> | 73 kB 00:00:00
>> > (12/32): ovirt-4.3-epel/x86_64/group_gz
>>
>> | 90 kB 00:00:00
>> > (13/32): epel-apache-maven/x86_64/primary_db
>>
>> | 5.0 kB 00:00:01
>> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
>>
>> | 1.0 MB 00:00:00
>> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
>>
>> | 429 kB 00:00:00
>> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
>>
>> | 211 kB 00:00:00
>> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
>>
>> | 3.4 kB 00:00:00
>> > (18/32): ovirt-4.3-snapshot/7/primary_db
>>
>> | 109 kB 00:00:00
>> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
>>
>> | 116 kB 00:00:00
>> > (20/32): ovirt-4.3-epel/x86_64/primary_db
>>
>> | 6.7 MB 00:00:00
>> > (21/32): ovirt-master-epel/x86_64/group_gz
>>
>> | 90 kB 00:00:00
>> > (22/32): ovirt-master-epel/x86_64/updateinfo
>>
>> | 1.0 MB 00:00:00
>> > (23/32): ovirt-master-snapshot/7/primary_db
>>
>> | 54 kB 00:00:00
>> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
>>
>> | 7.6 kB 00:00:01
>> > (25/32): ovirt-master-snapshot-static/7/primary_db
>>
>> | 4.6 kB 00:00:00
>> > (26/32): ovirt-master-epel/x86_64/primary_db
>>
>> | 6.7 MB 00:00:00
>> > (27/32): ovirt-master-virtio-win-latest/primary_db
>>
>> | 7.6 kB 00:00:00
>> > (28/32): centos-sclo-rh-release/x86_64/primary_db
>>
>> | 4.2 MB 00:00:03
>> > (29/32): updates/7/x86_64/primary_db
>>
>> | 6.7 MB 00:00:00
>> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
>>
>> | 611 kB 00:00:01
>> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
>>
>> | 2.3 kB 00:00:00
>> > (32/32): sac-gluster-ansible/x86_64/primary_db
>>
>> | 13 kB 00:00:00
>> > No package ansible-runner-service-dev available.
>> > Error: Nothing to do
>> >
>> >
>> > Fedor
>> >
>> > ----- Original Message -----
>> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
>> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>,
"devel" <devel(a)ovirt.org>
>> > Sent: Tuesday, March 10, 2020 5:56:53 PM
>> > Subject: Re: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev package?
>> >
>> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
>> fgavrilo(a)redhat.com>
>> > ha scritto:
>> >
>> > > Thanks for the response, Eyal!
>> > >
>> > > I already had ovirt-master repo installed, but updated everything
>> just in
>> > > case.
>> > > I even tried both yum and dnf (since yum on centos was giving me
lots
>> of
>> > > grief before and I learned their behaviour differs, especially when
it
>> > > comes to bugs) but none works...
>> > >
>> > > >No package ansible-runner-service-dev available.
>> > > >No match for argument: ansible-runner-service-dev
>> > >
>> > > Fedor
>> > >
>> > >
>> > Looks like you're trying to install ovirt-master-snapshot on el7.
>> > It won't work.
>> > Master is not supporting el7 anymore.
>> > You can use 4.3 snapshot rpm at :
>> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
>> if
>> > you need to stay on el7.
>> >
>> >
>> > > ----- Original Message -----
>> > > From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
>> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> > > Cc: "devel" <devel(a)ovirt.org>
>> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
>> > > Subject: Re: [ovirt-devel] what's up with
ansible-runner-service-dev
>> > > package?
>> > >
>> > > Hi Fedor,
>> > >
>> > > Please try:
>> > > 1. dnf install
>> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>> > > 2. dnf update
>> > > 3. dnf install ansible-runner-service-dev
>> > > 4. flow the instruction from thread 'New dependency for
development
>> > > environment'
>> > > The
>> > >
>> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov
<fgavrilo(a)redhat.com>
>> wrote:
>> > >
>> > > > Hi everyone,
>> > > >
>> > > > After I screwed up my dev environment beyond repair I have to
set
>> it up
>> > > > again and I see something I haven't last time (CentOS 7):
>> > > >
>> > > > $ sudo yum install ansible-runner-service-dev
>> > > > Loaded plugins: fastestmirror
>> > > > Loading mirror speeds from cached hostfile
>> > > > * base: mirror.hosting90.cz
>> > > > * centos-sclo-rh: mirror.hosting90.cz
>> > > > * centos-sclo-sclo: mirror.hosting90.cz
>> > > > * extras: mirror.hosting90.cz
>> > > > * ovirt-master-epel: mirror.hosting90.cz
>> > > > * ovirt-master-snapshot: ftp.nluug.nl
>> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
>> > > > * updates: mirror.hosting90.cz
>> > > > No package ansible-runner-service-dev available.
>> > > >
>> > > > Maybe something's missing from my notes, but where did it
go?
>> Should I
>> > > add
>> > > > some repo?
>> > > >
>> > > > Fedor
>> > > > _______________________________________________
>> > > > Devel mailing list -- devel(a)ovirt.org
>> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > > oVirt Code of Conduct:
>> > > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > List Archives:
>> > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
>> > > >
>> > >
>> > >
>> > > --
>> > > Regards,
>> > > Eyal Shenitzky
>> > > _______________________________________________
>> > > Devel mailing list -- devel(a)ovirt.org
>> > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
>> > >
>> >
>> >
>> > --
>> >
>> > Sandro Bonazzola
>> >
>> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
>> >
>> > Red Hat EMEA <https://www.redhat.com/>
>> >
>> > sbonazzo(a)redhat.com
>> > <https://www.redhat.com/>*Red Hat respects your work life balance.
>> > Therefore there is no need to answer this email out of your office
>> hours.
>> > <https://mojo.redhat.com/docs/DOC-1199578>*
>> > _______________________________________________
>> > Devel mailing list -- devel(a)ovirt.org
>> > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> > List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
>> _______________________________________________
>> Devel mailing list -- devel(a)ovirt.org
>> To unsubscribe send an email to devel-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
>>
>
>
> --
> Regards,
> Eyal Shenitzky
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
5:13 p.m.
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
FC30 dev env engine indeed :) I've done this before on other OS,
so unless
there is a blindspot somewhere in my eye it should be configured fine.
[apple@apple ~]$ sudo systemctl status ansible-runner-service
● ansible-runner-service.service - Ansible Runner Service
Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
Main PID: 909 (gunicorn-3)
Tasks: 9 (limit: 4915)
Memory: 193.4M
CGroup: /system.slice/ansible-runner-service.service
├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
--private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
--private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
└─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
StrictHostKeyChecking=no -o Port=22 -o
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
-o KbdInteractiveAu>
And the config:
---
version: 1
# playbooks_root_dir
# location of the playbooks that the service will start
playbooks_root_dir:
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
# port
# tcp port for the service to listen to
port: 50001
#
# ip_address
# Specific IP address to bind to
# ip_address: '0.0.0.0'
target_user: root
#event_cache_size: 3
ssh_private_key:
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
/home/apple/ovirt-engine is where engine is dev-installed. Not sure what
else to check now...
Anything strange in journalctl for gunicorn-3 service?
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 2:56:59 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
> Actually, it was too early for me to celebrate.
>
> On Fedora 30, the engine compiles and runs fine, but when I try adding
the
> host installation fails almost immediately and I get the following errors
> in the engine logs:
>
> ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana':
Failed
to
> execute Ansible host-deploy role: Internal server error, please check
> Ansible runner error log.. Please check logs for more details:
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> There is nothing else. There is no file
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> Snapshot I'm using for the host is the same that worked just fine when
> engine was running on CentOS 7 and is CentOS 7 itself. Is that an issue?
>
As you mentioned building engine I assume you are using engine in dev env
on FC30, right? If so, have you manually configured ansible-runner-service
for dev env as mentioned in
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
?
> Thanks,
> Fedor
>
> ----- Original Message -----
> From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> To: "Martin Perina" <mperina(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Monday, March 16, 2020 12:37:44 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Hi,
>
> Resolved through installing engine on Fedora 30. From what I understand,
> CentOS 7 is not supported anymore.
>
> Fedor
>
> ----- Original Message -----
> From: "Martin Perina" <mperina(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Benny Zlotnik" <bzlotnik(a)redhat.com>, "Dana Elfassy"
<
> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>, "Eyal
Shenitzky" <
> eshenitz(a)redhat.com>
> Sent: Monday, March 16, 2020 8:11:35 AM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Hi Fedor,
>
> ansible-runner-service-dev package is available from
>
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> repos which is included in ovirt-master-release package, which
> includes all repositories necessary for oVirt development:
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Was your issue resolved or not?
>
> Regards,
> Martin
>
>
>
>
> On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com>
> wrote:
>
> > Adding also +Dana Elfassy <delfassy(a)redhat.com>
> >
> > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com>
wrote:
> >
> >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> >>
> >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> >> wrote:
> >> >
> >> > Hi Sandro,
> >> >
> >> > Thanks for the suggestion, but it seems to not help much.
> >> >
> >> > ansible-runner-service-dev still can't be found, I checked repos
that
> >> are installed from
> >> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> >> and haven't found similarly names packages either...
> >> >
> >> > $ sudo yum install ansible-runner-service-dev
> >> > Loaded plugins: fastestmirror
> >> > Repository centos-sclo-rh-release is listed more than once in the
> >> configuration
> >> > Repository sac-gluster-ansible is listed more than once in the
> >> configuration
> >> > Determining fastest mirrors
> >> > ovirt-4.3-epel/x86_64/metalink
> >>
> >> | 30 kB 00:00:00
> >> > ovirt-master-epel/x86_64/metalink
> >>
> >> | 30 kB 00:00:00
> >> > * base: ftp.sh.cvut.cz
> >> > * centos-sclo-rh: ftp.sh.cvut.cz
> >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> >> > * extras: ftp.sh.cvut.cz
> >> > * ovirt-4.3-epel: mirror.karneval.cz
> >> > * ovirt-4.3-snapshot: ftp.plusline.net
> >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> >> > * ovirt-master-epel: mirror.karneval.cz
> >> > * ovirt-master-snapshot: ftp.plusline.net
> >> > * ovirt-master-snapshot-static: ftp.plusline.net
> >> > * updates: ftp.sh.cvut.cz
> >> > base
> >>
> >> | 3.6 kB 00:00:00
> >> > centos-opstools-release
> >>
> >> | 2.9 kB 00:00:00
> >> > centos-ovirt-common-testing
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-ovirt44-testing
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-qemu-ev-release
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-sclo-rh
> >>
> >> | 3.0 kB 00:00:00
> >> > centos-sclo-rh-release
> >>
> >> | 3.0 kB 00:00:00
> >> > centos-sclo-sclo
> >>
> >> | 2.9 kB 00:00:00
> >> > epel-apache-maven
> >>
> >> | 3.3 kB 00:00:00
> >> > extras
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-gluster6
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-opstools
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-ovirt43
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-qemu-ev
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-epel
> >>
> >> | 5.3 kB 00:00:00
> >> > ovirt-4.3-snapshot
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-4.3-snapshot-static
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-4.3-virtio-win-latest
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-centos-gluster6
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-master-centos-opstools-testing
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-master-epel
> >>
> >> | 5.3 kB 00:00:00
> >> > ovirt-master-snapshot
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-snapshot-static
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-virtio-win-latest
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirtwebui-ovirt-web-ui-master
> >>
> >> | 3.0 kB 00:00:00
> >> > sac-gluster-ansible
> >>
> >> | 3.3 kB 00:00:00
> >> > updates
> >>
> >> | 2.9 kB 00:00:00
> >> > (1/32): base/7/x86_64/group_gz
> >>
> >> | 165 kB 00:00:00
> >> > (2/32): base/7/x86_64/primary_db
> >>
> >> | 6.0 MB 00:00:00
> >> > (3/32): centos-sclo-rh/x86_64/primary_db
> >>
> >> | 4.2 MB 00:00:00
> >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> >>
> >> | 9.3 kB 00:00:00
> >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> >>
> >> | 344 kB 00:00:00
> >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> >>
> >> | 1.1 kB 00:00:01
> >> > (7/32): extras/7/x86_64/primary_db
> >>
> >> | 164 kB 00:00:00
> >> > (8/32): centos-opstools-release/x86_64/primary_db
> >>
> >> | 429 kB 00:00:01
> >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> >>
> >> | 101 kB 00:00:01
> >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> >>
> >> | 116 kB 00:00:00
> >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> >>
> >> | 73 kB 00:00:00
> >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> >>
> >> | 90 kB 00:00:00
> >> > (13/32): epel-apache-maven/x86_64/primary_db
> >>
> >> | 5.0 kB 00:00:01
> >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> >>
> >> | 1.0 MB 00:00:00
> >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> >>
> >> | 429 kB 00:00:00
> >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> >>
> >> | 211 kB 00:00:00
> >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> >>
> >> | 3.4 kB 00:00:00
> >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> >>
> >> | 109 kB 00:00:00
> >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> >>
> >> | 116 kB 00:00:00
> >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (21/32): ovirt-master-epel/x86_64/group_gz
> >>
> >> | 90 kB 00:00:00
> >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> >>
> >> | 1.0 MB 00:00:00
> >> > (23/32): ovirt-master-snapshot/7/primary_db
> >>
> >> | 54 kB 00:00:00
> >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> >>
> >> | 7.6 kB 00:00:01
> >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> >>
> >> | 4.6 kB 00:00:00
> >> > (26/32): ovirt-master-epel/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> >>
> >> | 7.6 kB 00:00:00
> >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> >>
> >> | 4.2 MB 00:00:03
> >> > (29/32): updates/7/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> >>
> >> | 611 kB 00:00:01
> >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> >>
> >> | 2.3 kB 00:00:00
> >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> >>
> >> | 13 kB 00:00:00
> >> > No package ansible-runner-service-dev available.
> >> > Error: Nothing to do
> >> >
> >> >
> >> > Fedor
> >> >
> >> > ----- Original Message -----
> >> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
> >> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> >> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>,
"devel" <
devel(a)ovirt.org>
> >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> >> > Subject: Re: [ovirt-devel] Re: what's up with
> >> ansible-runner-service-dev package?
> >> >
> >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> >> fgavrilo(a)redhat.com>
> >> > ha scritto:
> >> >
> >> > > Thanks for the response, Eyal!
> >> > >
> >> > > I already had ovirt-master repo installed, but updated
everything
> >> just in
> >> > > case.
> >> > > I even tried both yum and dnf (since yum on centos was giving me
> lots
> >> of
> >> > > grief before and I learned their behaviour differs, especially
when
> it
> >> > > comes to bugs) but none works...
> >> > >
> >> > > >No package ansible-runner-service-dev available.
> >> > > >No match for argument: ansible-runner-service-dev
> >> > >
> >> > > Fedor
> >> > >
> >> > >
> >> > Looks like you're trying to install ovirt-master-snapshot on el7.
> >> > It won't work.
> >> > Master is not supporting el7 anymore.
> >> > You can use 4.3 snapshot rpm at :
> >> >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> >> if
> >> > you need to stay on el7.
> >> >
> >> >
> >> > > ----- Original Message -----
> >> > > From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
> >> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> >> > > Cc: "devel" <devel(a)ovirt.org>
> >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> >> > > Subject: Re: [ovirt-devel] what's up with
ansible-runner-service-dev
> >> > > package?
> >> > >
> >> > > Hi Fedor,
> >> > >
> >> > > Please try:
> >> > > 1. dnf install
> >> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >> > > 2. dnf update
> >> > > 3. dnf install ansible-runner-service-dev
> >> > > 4. flow the instruction from thread 'New dependency for
development
> >> > > environment'
> >> > > The
> >> > >
> >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov
<fgavrilo(a)redhat.com
>
> >> wrote:
> >> > >
> >> > > > Hi everyone,
> >> > > >
> >> > > > After I screwed up my dev environment beyond repair I have
to
set
> >> it up
> >> > > > again and I see something I haven't last time (CentOS
7):
> >> > > >
> >> > > > $ sudo yum install ansible-runner-service-dev
> >> > > > Loaded plugins: fastestmirror
> >> > > > Loading mirror speeds from cached hostfile
> >> > > > * base: mirror.hosting90.cz
> >> > > > * centos-sclo-rh: mirror.hosting90.cz
> >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> >> > > > * extras: mirror.hosting90.cz
> >> > > > * ovirt-master-epel: mirror.hosting90.cz
> >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> >> > > > * updates: mirror.hosting90.cz
> >> > > > No package ansible-runner-service-dev available.
> >> > > >
> >> > > > Maybe something's missing from my notes, but where did
it go?
> >> Should I
> >> > > add
> >> > > > some repo?
> >> > > >
> >> > > > Fedor
> >> > > > _______________________________________________
> >> > > > Devel mailing list -- devel(a)ovirt.org
> >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> >> > > > oVirt Code of Conduct:
> >> > > > https://www.ovirt.org/community/about/community-guidelines/
> >> > > > List Archives:
> >> > > >
> >> > >
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> >> > > >
> >> > >
> >> > >
> >> > > --
> >> > > Regards,
> >> > > Eyal Shenitzky
> >> > > _______________________________________________
> >> > > Devel mailing list -- devel(a)ovirt.org
> >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > > oVirt Code of Conduct:
> >> > > https://www.ovirt.org/community/about/community-guidelines/
> >> > > List Archives:
> >> > >
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> >> > >
> >> >
> >> >
> >> > --
> >> >
> >> > Sandro Bonazzola
> >> >
> >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> >> >
> >> > Red Hat EMEA <https://www.redhat.com/>
> >> >
> >> > sbonazzo(a)redhat.com
> >> > <https://www.redhat.com/>*Red Hat respects your work life
balance.
> >> > Therefore there is no need to answer this email out of your office
> >> hours.
> >> > <https://mojo.redhat.com/docs/DOC-1199578>*
> >> > _______________________________________________
> >> > Devel mailing list -- devel(a)ovirt.org
> >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> > List Archives:
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> >> _______________________________________________
> >> Devel mailing list -- devel(a)ovirt.org
> >> To unsubscribe send an email to devel-leave(a)ovirt.org
> >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> List Archives:
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> >>
> >
> >
> > --
> > Regards,
> > Eyal Shenitzky
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> >
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
5:32 p.m.
New subject: what's up with ansible-runner-service-dev package?
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
So does that mean that something was supposed to register it as a service but did not?
Fedor
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
FC30 dev env engine indeed :) I've done this before on other OS,
so unless
there is a blindspot somewhere in my eye it should be configured fine.
[apple@apple ~]$ sudo systemctl status ansible-runner-service
● ansible-runner-service.service - Ansible Runner Service
Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
Main PID: 909 (gunicorn-3)
Tasks: 9 (limit: 4915)
Memory: 193.4M
CGroup: /system.slice/ansible-runner-service.service
├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
--private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
--private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
└─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
StrictHostKeyChecking=no -o Port=22 -o
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
-o KbdInteractiveAu>
And the config:
---
version: 1
# playbooks_root_dir
# location of the playbooks that the service will start
playbooks_root_dir:
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
# port
# tcp port for the service to listen to
port: 50001
#
# ip_address
# Specific IP address to bind to
# ip_address: '0.0.0.0'
target_user: root
#event_cache_size: 3
ssh_private_key:
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
/home/apple/ovirt-engine is where engine is dev-installed. Not sure what
else to check now...
Anything strange in journalctl for gunicorn-3 service?
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 2:56:59 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
> Actually, it was too early for me to celebrate.
>
> On Fedora 30, the engine compiles and runs fine, but when I try adding
the
> host installation fails almost immediately and I get the following errors
> in the engine logs:
>
> ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana':
Failed
to
> execute Ansible host-deploy role: Internal server error, please check
> Ansible runner error log.. Please check logs for more details:
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> There is nothing else. There is no file
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> Snapshot I'm using for the host is the same that worked just fine when
> engine was running on CentOS 7 and is CentOS 7 itself. Is that an issue?
>
As you mentioned building engine I assume you are using engine in dev env
on FC30, right? If so, have you manually configured ansible-runner-service
for dev env as mentioned in
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
?
> Thanks,
> Fedor
>
> ----- Original Message -----
> From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> To: "Martin Perina" <mperina(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Monday, March 16, 2020 12:37:44 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Hi,
>
> Resolved through installing engine on Fedora 30. From what I understand,
> CentOS 7 is not supported anymore.
>
> Fedor
>
> ----- Original Message -----
> From: "Martin Perina" <mperina(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Benny Zlotnik" <bzlotnik(a)redhat.com>, "Dana Elfassy"
<
> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>, "Eyal
Shenitzky" <
> eshenitz(a)redhat.com>
> Sent: Monday, March 16, 2020 8:11:35 AM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Hi Fedor,
>
> ansible-runner-service-dev package is available from
>
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> repos which is included in ovirt-master-release package, which
> includes all repositories necessary for oVirt development:
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Was your issue resolved or not?
>
> Regards,
> Martin
>
>
>
>
> On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com>
> wrote:
>
> > Adding also +Dana Elfassy <delfassy(a)redhat.com>
> >
> > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com>
wrote:
> >
> >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> >>
> >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> >> wrote:
> >> >
> >> > Hi Sandro,
> >> >
> >> > Thanks for the suggestion, but it seems to not help much.
> >> >
> >> > ansible-runner-service-dev still can't be found, I checked repos
that
> >> are installed from
> >> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> >> and haven't found similarly names packages either...
> >> >
> >> > $ sudo yum install ansible-runner-service-dev
> >> > Loaded plugins: fastestmirror
> >> > Repository centos-sclo-rh-release is listed more than once in the
> >> configuration
> >> > Repository sac-gluster-ansible is listed more than once in the
> >> configuration
> >> > Determining fastest mirrors
> >> > ovirt-4.3-epel/x86_64/metalink
> >>
> >> | 30 kB 00:00:00
> >> > ovirt-master-epel/x86_64/metalink
> >>
> >> | 30 kB 00:00:00
> >> > * base: ftp.sh.cvut.cz
> >> > * centos-sclo-rh: ftp.sh.cvut.cz
> >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> >> > * extras: ftp.sh.cvut.cz
> >> > * ovirt-4.3-epel: mirror.karneval.cz
> >> > * ovirt-4.3-snapshot: ftp.plusline.net
> >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> >> > * ovirt-master-epel: mirror.karneval.cz
> >> > * ovirt-master-snapshot: ftp.plusline.net
> >> > * ovirt-master-snapshot-static: ftp.plusline.net
> >> > * updates: ftp.sh.cvut.cz
> >> > base
> >>
> >> | 3.6 kB 00:00:00
> >> > centos-opstools-release
> >>
> >> | 2.9 kB 00:00:00
> >> > centos-ovirt-common-testing
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-ovirt44-testing
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-qemu-ev-release
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-sclo-rh
> >>
> >> | 3.0 kB 00:00:00
> >> > centos-sclo-rh-release
> >>
> >> | 3.0 kB 00:00:00
> >> > centos-sclo-sclo
> >>
> >> | 2.9 kB 00:00:00
> >> > epel-apache-maven
> >>
> >> | 3.3 kB 00:00:00
> >> > extras
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-gluster6
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-opstools
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-ovirt43
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-qemu-ev
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-epel
> >>
> >> | 5.3 kB 00:00:00
> >> > ovirt-4.3-snapshot
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-4.3-snapshot-static
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-4.3-virtio-win-latest
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-centos-gluster6
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-master-centos-opstools-testing
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-master-epel
> >>
> >> | 5.3 kB 00:00:00
> >> > ovirt-master-snapshot
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-snapshot-static
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-virtio-win-latest
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirtwebui-ovirt-web-ui-master
> >>
> >> | 3.0 kB 00:00:00
> >> > sac-gluster-ansible
> >>
> >> | 3.3 kB 00:00:00
> >> > updates
> >>
> >> | 2.9 kB 00:00:00
> >> > (1/32): base/7/x86_64/group_gz
> >>
> >> | 165 kB 00:00:00
> >> > (2/32): base/7/x86_64/primary_db
> >>
> >> | 6.0 MB 00:00:00
> >> > (3/32): centos-sclo-rh/x86_64/primary_db
> >>
> >> | 4.2 MB 00:00:00
> >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> >>
> >> | 9.3 kB 00:00:00
> >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> >>
> >> | 344 kB 00:00:00
> >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> >>
> >> | 1.1 kB 00:00:01
> >> > (7/32): extras/7/x86_64/primary_db
> >>
> >> | 164 kB 00:00:00
> >> > (8/32): centos-opstools-release/x86_64/primary_db
> >>
> >> | 429 kB 00:00:01
> >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> >>
> >> | 101 kB 00:00:01
> >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> >>
> >> | 116 kB 00:00:00
> >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> >>
> >> | 73 kB 00:00:00
> >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> >>
> >> | 90 kB 00:00:00
> >> > (13/32): epel-apache-maven/x86_64/primary_db
> >>
> >> | 5.0 kB 00:00:01
> >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> >>
> >> | 1.0 MB 00:00:00
> >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> >>
> >> | 429 kB 00:00:00
> >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> >>
> >> | 211 kB 00:00:00
> >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> >>
> >> | 3.4 kB 00:00:00
> >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> >>
> >> | 109 kB 00:00:00
> >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> >>
> >> | 116 kB 00:00:00
> >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (21/32): ovirt-master-epel/x86_64/group_gz
> >>
> >> | 90 kB 00:00:00
> >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> >>
> >> | 1.0 MB 00:00:00
> >> > (23/32): ovirt-master-snapshot/7/primary_db
> >>
> >> | 54 kB 00:00:00
> >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> >>
> >> | 7.6 kB 00:00:01
> >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> >>
> >> | 4.6 kB 00:00:00
> >> > (26/32): ovirt-master-epel/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> >>
> >> | 7.6 kB 00:00:00
> >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> >>
> >> | 4.2 MB 00:00:03
> >> > (29/32): updates/7/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> >>
> >> | 611 kB 00:00:01
> >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> >>
> >> | 2.3 kB 00:00:00
> >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> >>
> >> | 13 kB 00:00:00
> >> > No package ansible-runner-service-dev available.
> >> > Error: Nothing to do
> >> >
> >> >
> >> > Fedor
> >> >
> >> > ----- Original Message -----
> >> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
> >> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> >> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>,
"devel" <
devel(a)ovirt.org>
> >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> >> > Subject: Re: [ovirt-devel] Re: what's up with
> >> ansible-runner-service-dev package?
> >> >
> >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> >> fgavrilo(a)redhat.com>
> >> > ha scritto:
> >> >
> >> > > Thanks for the response, Eyal!
> >> > >
> >> > > I already had ovirt-master repo installed, but updated
everything
> >> just in
> >> > > case.
> >> > > I even tried both yum and dnf (since yum on centos was giving me
> lots
> >> of
> >> > > grief before and I learned their behaviour differs, especially
when
> it
> >> > > comes to bugs) but none works...
> >> > >
> >> > > >No package ansible-runner-service-dev available.
> >> > > >No match for argument: ansible-runner-service-dev
> >> > >
> >> > > Fedor
> >> > >
> >> > >
> >> > Looks like you're trying to install ovirt-master-snapshot on el7.
> >> > It won't work.
> >> > Master is not supporting el7 anymore.
> >> > You can use 4.3 snapshot rpm at :
> >> >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> >> if
> >> > you need to stay on el7.
> >> >
> >> >
> >> > > ----- Original Message -----
> >> > > From: "Eyal Shenitzky" <eshenitz(a)redhat.com>
> >> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> >> > > Cc: "devel" <devel(a)ovirt.org>
> >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> >> > > Subject: Re: [ovirt-devel] what's up with
ansible-runner-service-dev
> >> > > package?
> >> > >
> >> > > Hi Fedor,
> >> > >
> >> > > Please try:
> >> > > 1. dnf install
> >> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >> > > 2. dnf update
> >> > > 3. dnf install ansible-runner-service-dev
> >> > > 4. flow the instruction from thread 'New dependency for
development
> >> > > environment'
> >> > > The
> >> > >
> >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov
<fgavrilo(a)redhat.com
>
> >> wrote:
> >> > >
> >> > > > Hi everyone,
> >> > > >
> >> > > > After I screwed up my dev environment beyond repair I have
to
set
> >> it up
> >> > > > again and I see something I haven't last time (CentOS
7):
> >> > > >
> >> > > > $ sudo yum install ansible-runner-service-dev
> >> > > > Loaded plugins: fastestmirror
> >> > > > Loading mirror speeds from cached hostfile
> >> > > > * base: mirror.hosting90.cz
> >> > > > * centos-sclo-rh: mirror.hosting90.cz
> >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> >> > > > * extras: mirror.hosting90.cz
> >> > > > * ovirt-master-epel: mirror.hosting90.cz
> >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> >> > > > * updates: mirror.hosting90.cz
> >> > > > No package ansible-runner-service-dev available.
> >> > > >
> >> > > > Maybe something's missing from my notes, but where did
it go?
> >> Should I
> >> > > add
> >> > > > some repo?
> >> > > >
> >> > > > Fedor
> >> > > > _______________________________________________
> >> > > > Devel mailing list -- devel(a)ovirt.org
> >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> >> > > > oVirt Code of Conduct:
> >> > > > https://www.ovirt.org/community/about/community-guidelines/
> >> > > > List Archives:
> >> > > >
> >> > >
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> >> > > >
> >> > >
> >> > >
> >> > > --
> >> > > Regards,
> >> > > Eyal Shenitzky
> >> > > _______________________________________________
> >> > > Devel mailing list -- devel(a)ovirt.org
> >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > > oVirt Code of Conduct:
> >> > > https://www.ovirt.org/community/about/community-guidelines/
> >> > > List Archives:
> >> > >
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> >> > >
> >> >
> >> >
> >> > --
> >> >
> >> > Sandro Bonazzola
> >> >
> >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> >> >
> >> > Red Hat EMEA <https://www.redhat.com/>
> >> >
> >> > sbonazzo(a)redhat.com
> >> > <https://www.redhat.com/>*Red Hat respects your work life
balance.
> >> > Therefore there is no need to answer this email out of your office
> >> hours.
> >> > <https://mojo.redhat.com/docs/DOC-1199578>*
> >> > _______________________________________________
> >> > Devel mailing list -- devel(a)ovirt.org
> >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> > List Archives:
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> >> _______________________________________________
> >> Devel mailing list -- devel(a)ovirt.org
> >> To unsubscribe send an email to devel-leave(a)ovirt.org
> >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> List Archives:
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> >>
> >
> >
> > --
> > Regards,
> > Eyal Shenitzky
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> >
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
5:36 p.m.
On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
After you start ansible-runner-service service, you should see similar logs
in journalctl:
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Starting gunicorn 19.9.0
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Using worker: sync
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1496] [INFO] Booting worker with pid: 1496
And more if you execute some action from engine (like install new host or
upgrade a host)
So does that mean that something was supposed to register it as a service
but did not?
Fedor
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
> FC30 dev env engine indeed :) I've done this before on other OS, so
unless
> there is a blindspot somewhere in my eye it should be configured fine.
>
> [apple@apple ~]$ sudo systemctl status ansible-runner-service
> ● ansible-runner-service.service - Ansible Runner Service
> Loaded: loaded
(/usr/lib/systemd/system/ansible-runner-service.service;
> enabled; vendor preset: disabled)
> Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> Main PID: 909 (gunicorn-3)
> Tasks: 9 (limit: 4915)
> Memory: 193.4M
> CGroup: /system.slice/ansible-runner-service.service
> ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> StrictHostKeyChecking=no -o Port=22 -o
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> -o KbdInteractiveAu>
>
> And the config:
>
> ---
> version: 1
>
> # playbooks_root_dir
> # location of the playbooks that the service will start
> playbooks_root_dir:
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> # port
> # tcp port for the service to listen to
> port: 50001
> #
> # ip_address
> # Specific IP address to bind to
> # ip_address: '0.0.0.0'
> target_user: root
> #event_cache_size: 3
> ssh_private_key:
> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
>
> /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> else to check now...
>
Anything strange in journalctl for gunicorn-3 service?
>
>
> ----- Original Message -----
> From: "Martin Perina" <mperina(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Monday, March 16, 2020 2:56:59 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
>
> > Actually, it was too early for me to celebrate.
> >
> > On Fedora 30, the engine compiles and runs fine, but when I try adding
> the
> > host installation fails almost immediately and I get the following
errors
> > in the engine logs:
> >
> > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
Failed
> to
> > execute Ansible host-deploy role: Internal server error, please check
> > Ansible runner error log.. Please check logs for more details:
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > There is nothing else. There is no file
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > Snapshot I'm using for the host is the same that worked just fine when
> > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
issue?
> >
>
> As you mentioned building engine I assume you are using engine in dev env
> on FC30, right? If so, have you manually configured
ansible-runner-service
> for dev env as mentioned in
>
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> ?
>
>
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > To: "Martin Perina" <mperina(a)redhat.com>
> > Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> > Sent: Monday, March 16, 2020 12:37:44 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Hi,
> >
> > Resolved through installing engine on Fedora 30. From what I
understand,
> > CentOS 7 is not supported anymore.
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" <mperina(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "Benny Zlotnik" <bzlotnik(a)redhat.com>, "Dana
Elfassy" <
> > delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>, "Eyal
Shenitzky" <
> > eshenitz(a)redhat.com>
> > Sent: Monday, March 16, 2020 8:11:35 AM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > Hi Fedor,
> >
> > ansible-runner-service-dev package is available from
> >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > repos which is included in ovirt-master-release package, which
> > includes all repositories necessary for oVirt development:
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >
> > Was your issue resolved or not?
> >
> > Regards,
> > Martin
> >
> >
> >
> >
> > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <eshenitz(a)redhat.com>
> > wrote:
> >
> > > Adding also +Dana Elfassy <delfassy(a)redhat.com>
> > >
> > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <bzlotnik(a)redhat.com>
> wrote:
> > >
> > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > >>
> > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov
<fgavrilo(a)redhat.com
>
> > >> wrote:
> > >> >
> > >> > Hi Sandro,
> > >> >
> > >> > Thanks for the suggestion, but it seems to not help much.
> > >> >
> > >> > ansible-runner-service-dev still can't be found, I checked
repos
> that
> > >> are installed from
> > >>
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> and haven't found similarly names packages either...
> > >> >
> > >> > $ sudo yum install ansible-runner-service-dev
> > >> > Loaded plugins: fastestmirror
> > >> > Repository centos-sclo-rh-release is listed more than once in
the
> > >> configuration
> > >> > Repository sac-gluster-ansible is listed more than once in the
> > >> configuration
> > >> > Determining fastest mirrors
> > >> > ovirt-4.3-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > ovirt-master-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > * base: ftp.sh.cvut.cz
> > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > >> > * extras: ftp.sh.cvut.cz
> > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > >> > * ovirt-master-epel: mirror.karneval.cz
> > >> > * ovirt-master-snapshot: ftp.plusline.net
> > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > >> > * updates: ftp.sh.cvut.cz
> > >> > base
> > >>
> > >> | 3.6 kB 00:00:00
> > >> > centos-opstools-release
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > centos-ovirt-common-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-ovirt44-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-qemu-ev-release
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-sclo-rh
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-rh-release
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-sclo
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > epel-apache-maven
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > extras
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-opstools
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-ovirt43
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-qemu-ev
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-4.3-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-centos-opstools-testing
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-master-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirtwebui-ovirt-web-ui-master
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > sac-gluster-ansible
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > updates
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > (1/32): base/7/x86_64/group_gz
> > >>
> > >> | 165 kB 00:00:00
> > >> > (2/32): base/7/x86_64/primary_db
> > >>
> > >> | 6.0 MB 00:00:00
> > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:00
> > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > >>
> > >> | 9.3 kB 00:00:00
> > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > >>
> > >> | 344 kB 00:00:00
> > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > >>
> > >> | 1.1 kB 00:00:01
> > >> > (7/32): extras/7/x86_64/primary_db
> > >>
> > >> | 164 kB 00:00:00
> > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:01
> > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > >>
> > >> | 101 kB 00:00:01
> > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > >>
> > >> | 73 kB 00:00:00
> > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > >>
> > >> | 5.0 kB 00:00:01
> > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:00
> > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > >>
> > >> | 211 kB 00:00:00
> > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > >>
> > >> | 109 kB 00:00:00
> > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > >>
> > >> | 54 kB 00:00:00
> > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:01
> > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > >>
> > >> | 4.6 kB 00:00:00
> > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:00
> > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:03
> > >> > (29/32): updates/7/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> > >>
> > >> | 611 kB 00:00:01
> > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > >>
> > >> | 2.3 kB 00:00:00
> > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > >>
> > >> | 13 kB 00:00:00
> > >> > No package ansible-runner-service-dev available.
> > >> > Error: Nothing to do
> > >> >
> > >> >
> > >> > Fedor
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>
> > >> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > >> > Cc: "Eyal Shenitzky" <eshenitz(a)redhat.com>,
"devel" <
> devel(a)ovirt.org>
> > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > >> ansible-runner-service-dev package?
> > >> >
> > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> > >> fgavrilo(a)redhat.com>
> > >> > ha scritto:
> > >> >
> > >> > > Thanks for the response, Eyal!
> > >> > >
> > >> > > I already had ovirt-master repo installed, but updated
everything
> > >> just in
> > >> > > case.
> > >> > > I even tried both yum and dnf (since yum on centos was
giving me
> > lots
> > >> of
> > >> > > grief before and I learned their behaviour differs,
especially
> when
> > it
> > >> > > comes to bugs) but none works...
> > >> > >
> > >> > > >No package ansible-runner-service-dev available.
> > >> > > >No match for argument: ansible-runner-service-dev
> > >> > >
> > >> > > Fedor
> > >> > >
> > >> > >
> > >> > Looks like you're trying to install ovirt-master-snapshot on
el7.
> > >> > It won't work.
> > >> > Master is not supporting el7 anymore.
> > >> > You can use 4.3 snapshot rpm at :
> > >> >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> if
> > >> > you need to stay on el7.
> > >> >
> > >> >
> > >> > > ----- Original Message -----
> > >> > > From: "Eyal Shenitzky"
<eshenitz(a)redhat.com>
> > >> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > >> > > Cc: "devel" <devel(a)ovirt.org>
> > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > >> > > Subject: Re: [ovirt-devel] what's up with
> ansible-runner-service-dev
> > >> > > package?
> > >> > >
> > >> > > Hi Fedor,
> > >> > >
> > >> > > Please try:
> > >> > > 1. dnf install
> > >> > >
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >> > > 2. dnf update
> > >> > > 3. dnf install ansible-runner-service-dev
> > >> > > 4. flow the instruction from thread 'New dependency
for
> development
> > >> > > environment'
> > >> > > The
> > >> > >
> > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > >> wrote:
> > >> > >
> > >> > > > Hi everyone,
> > >> > > >
> > >> > > > After I screwed up my dev environment beyond repair I
have to
> set
> > >> it up
> > >> > > > again and I see something I haven't last time
(CentOS 7):
> > >> > > >
> > >> > > > $ sudo yum install ansible-runner-service-dev
> > >> > > > Loaded plugins: fastestmirror
> > >> > > > Loading mirror speeds from cached hostfile
> > >> > > > * base: mirror.hosting90.cz
> > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > >> > > > * extras: mirror.hosting90.cz
> > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > >> > > > * updates: mirror.hosting90.cz
> > >> > > > No package ansible-runner-service-dev available.
> > >> > > >
> > >> > > > Maybe something's missing from my notes, but where
did it go?
> > >> Should I
> > >> > > add
> > >> > > > some repo?
> > >> > > >
> > >> > > > Fedor
> > >> > > > _______________________________________________
> > >> > > > Devel mailing list -- devel(a)ovirt.org
> > >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > > oVirt Code of Conduct:
> > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > >> > > > List Archives:
> > >> > > >
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > >> > > >
> > >> > >
> > >> > >
> > >> > > --
> > >> > > Regards,
> > >> > > Eyal Shenitzky
> > >> > > _______________________________________________
> > >> > > Devel mailing list -- devel(a)ovirt.org
> > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > oVirt Code of Conduct:
> > >> > > https://www.ovirt.org/community/about/community-guidelines/
> > >> > > List Archives:
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >> > >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> > Sandro Bonazzola
> > >> >
> > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > >> >
> > >> > Red Hat EMEA <https://www.redhat.com/>
> > >> >
> > >> > sbonazzo(a)redhat.com
> > >> > <https://www.redhat.com/>*Red Hat respects your work life
balance.
> > >> > Therefore there is no need to answer this email out of your
office
> > >> hours.
> > >> > <https://mojo.redhat.com/docs/DOC-1199578>*
> > >> > _______________________________________________
> > >> > Devel mailing list -- devel(a)ovirt.org
> > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> > oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> > List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > >> _______________________________________________
> > >> Devel mailing list -- devel(a)ovirt.org
> > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > >>
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
5:52 p.m.
New subject: what's up with ansible-runner-service-dev package?
Sorry, my bad, it was just under my nose. Systemctl is not aware of gunicorn-3, but when I
check journalctl for ansible-runner-service I see the following:
Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] [INFO] Starting
gunicorn 19.9.0
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] [INFO]
Listening at: http://127.0.0.1:50001 (2992)
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] [INFO] Using
worker: sync
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995] [INFO] Booting
worker with pid: 2995
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997] [INFO] Booting
worker with pid: 2997
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration options from
/etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from environment
variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings overridden
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration options from
/etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from environment
variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings overridden
Is that any suspicious? :)
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:36:40 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
After you start ansible-runner-service service, you should see similar logs in journalctl:
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] [1386] [INFO]
Starting gunicorn 19.9.0
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] [1386] [INFO]
Listening at: http://127.0.0.1:50001 (1386)
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] [1386] [INFO] Using
worker: sync
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] [1496] [INFO]
Booting worker with pid: 1496
And more if you execute some action from engine (like install new host or upgrade a host)
So does that mean that something was supposed to register it as a service but did not?
Fedor
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
FC30 dev env engine indeed :) I've done this before on other OS,
so unless
there is a blindspot somewhere in my eye it should be configured fine.
[apple@apple ~]$ sudo systemctl status ansible-runner-service
● ansible-runner-service.service - Ansible Runner Service
Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
Main PID: 909 (gunicorn-3)
Tasks: 9 (limit: 4915)
Memory: 193.4M
CGroup: /system.slice/ansible-runner-service.service
├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
--private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
--private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
└─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
StrictHostKeyChecking=no -o Port=22 -o
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
-o KbdInteractiveAu>
And the config:
---
version: 1
# playbooks_root_dir
# location of the playbooks that the service will start
playbooks_root_dir:
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
# port
# tcp port for the service to listen to
port: 50001
#
# ip_address
# Specific IP address to bind to
# ip_address: '0.0.0.0'
target_user: root
#event_cache_size: 3
ssh_private_key:
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
/home/apple/ovirt-engine is where engine is dev-installed. Not sure what
else to check now...
Anything strange in journalctl for gunicorn-3 service?
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 2:56:59 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
> Actually, it was too early for me to celebrate.
>
> On Fedora 30, the engine compiles and runs fine, but when I try adding
the
> host installation fails almost immediately and I get the following errors
> in the engine logs:
>
> ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana':
Failed
to
> execute Ansible host-deploy role: Internal server error, please check
> Ansible runner error log.. Please check logs for more details:
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> There is nothing else. There is no file
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> Snapshot I'm using for the host is the same that worked just fine when
> engine was running on CentOS 7 and is CentOS 7 itself. Is that an issue?
>
As you mentioned building engine I assume you are using engine in dev env
on FC30, right? If so, have you manually configured ansible-runner-service
for dev env as mentioned in
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
?
> Thanks,
> Fedor
>
> ----- Original Message -----
> From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> To: "Martin Perina" < mperina(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 12:37:44 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Hi,
>
> Resolved through installing engine on Fedora 30. From what I understand,
> CentOS 7 is not supported anymore.
>
> Fedor
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >, "Eyal
Shenitzky" <
> eshenitz(a)redhat.com >
> Sent: Monday, March 16, 2020 8:11:35 AM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Hi Fedor,
>
> ansible-runner-service-dev package is available from
>
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> repos which is included in ovirt-master-release package, which
> includes all repositories necessary for oVirt development:
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Was your issue resolved or not?
>
> Regards,
> Martin
>
>
>
>
> On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com >
> wrote:
>
> > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> >
> > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com >
wrote:
> >
> >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> >>
> >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> >> wrote:
> >> >
> >> > Hi Sandro,
> >> >
> >> > Thanks for the suggestion, but it seems to not help much.
> >> >
> >> > ansible-runner-service-dev still can't be found, I checked repos
that
> >> are installed from
> >> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> >> and haven't found similarly names packages either...
> >> >
> >> > $ sudo yum install ansible-runner-service-dev
> >> > Loaded plugins: fastestmirror
> >> > Repository centos-sclo-rh-release is listed more than once in the
> >> configuration
> >> > Repository sac-gluster-ansible is listed more than once in the
> >> configuration
> >> > Determining fastest mirrors
> >> > ovirt-4.3-epel/x86_64/metalink
> >>
> >> | 30 kB 00:00:00
> >> > ovirt-master-epel/x86_64/metalink
> >>
> >> | 30 kB 00:00:00
> >> > * base: ftp.sh.cvut.cz
> >> > * centos-sclo-rh: ftp.sh.cvut.cz
> >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> >> > * extras: ftp.sh.cvut.cz
> >> > * ovirt-4.3-epel: mirror.karneval.cz
> >> > * ovirt-4.3-snapshot: ftp.plusline.net
> >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> >> > * ovirt-master-epel: mirror.karneval.cz
> >> > * ovirt-master-snapshot: ftp.plusline.net
> >> > * ovirt-master-snapshot-static: ftp.plusline.net
> >> > * updates: ftp.sh.cvut.cz
> >> > base
> >>
> >> | 3.6 kB 00:00:00
> >> > centos-opstools-release
> >>
> >> | 2.9 kB 00:00:00
> >> > centos-ovirt-common-testing
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-ovirt44-testing
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-qemu-ev-release
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-sclo-rh
> >>
> >> | 3.0 kB 00:00:00
> >> > centos-sclo-rh-release
> >>
> >> | 3.0 kB 00:00:00
> >> > centos-sclo-sclo
> >>
> >> | 2.9 kB 00:00:00
> >> > epel-apache-maven
> >>
> >> | 3.3 kB 00:00:00
> >> > extras
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-gluster6
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-opstools
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-ovirt43
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-qemu-ev
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-epel
> >>
> >> | 5.3 kB 00:00:00
> >> > ovirt-4.3-snapshot
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-4.3-snapshot-static
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-4.3-virtio-win-latest
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-centos-gluster6
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-master-centos-opstools-testing
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-master-epel
> >>
> >> | 5.3 kB 00:00:00
> >> > ovirt-master-snapshot
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-snapshot-static
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-virtio-win-latest
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirtwebui-ovirt-web-ui-master
> >>
> >> | 3.0 kB 00:00:00
> >> > sac-gluster-ansible
> >>
> >> | 3.3 kB 00:00:00
> >> > updates
> >>
> >> | 2.9 kB 00:00:00
> >> > (1/32): base/7/x86_64/group_gz
> >>
> >> | 165 kB 00:00:00
> >> > (2/32): base/7/x86_64/primary_db
> >>
> >> | 6.0 MB 00:00:00
> >> > (3/32): centos-sclo-rh/x86_64/primary_db
> >>
> >> | 4.2 MB 00:00:00
> >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> >>
> >> | 9.3 kB 00:00:00
> >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> >>
> >> | 344 kB 00:00:00
> >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> >>
> >> | 1.1 kB 00:00:01
> >> > (7/32): extras/7/x86_64/primary_db
> >>
> >> | 164 kB 00:00:00
> >> > (8/32): centos-opstools-release/x86_64/primary_db
> >>
> >> | 429 kB 00:00:01
> >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> >>
> >> | 101 kB 00:00:01
> >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> >>
> >> | 116 kB 00:00:00
> >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> >>
> >> | 73 kB 00:00:00
> >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> >>
> >> | 90 kB 00:00:00
> >> > (13/32): epel-apache-maven/x86_64/primary_db
> >>
> >> | 5.0 kB 00:00:01
> >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> >>
> >> | 1.0 MB 00:00:00
> >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> >>
> >> | 429 kB 00:00:00
> >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> >>
> >> | 211 kB 00:00:00
> >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> >>
> >> | 3.4 kB 00:00:00
> >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> >>
> >> | 109 kB 00:00:00
> >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> >>
> >> | 116 kB 00:00:00
> >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (21/32): ovirt-master-epel/x86_64/group_gz
> >>
> >> | 90 kB 00:00:00
> >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> >>
> >> | 1.0 MB 00:00:00
> >> > (23/32): ovirt-master-snapshot/7/primary_db
> >>
> >> | 54 kB 00:00:00
> >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> >>
> >> | 7.6 kB 00:00:01
> >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> >>
> >> | 4.6 kB 00:00:00
> >> > (26/32): ovirt-master-epel/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> >>
> >> | 7.6 kB 00:00:00
> >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> >>
> >> | 4.2 MB 00:00:03
> >> > (29/32): updates/7/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> >>
> >> | 611 kB 00:00:01
> >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> >>
> >> | 2.3 kB 00:00:00
> >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> >>
> >> | 13 kB 00:00:00
> >> > No package ansible-runner-service-dev available.
> >> > Error: Nothing to do
> >> >
> >> >
> >> > Fedor
> >> >
> >> > ----- Original Message -----
> >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com >
> >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >,
"devel" <
devel(a)ovirt.org >
> >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> >> > Subject: Re: [ovirt-devel] Re: what's up with
> >> ansible-runner-service-dev package?
> >> >
> >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> >> fgavrilo(a)redhat.com >
> >> > ha scritto:
> >> >
> >> > > Thanks for the response, Eyal!
> >> > >
> >> > > I already had ovirt-master repo installed, but updated everything
> >> just in
> >> > > case.
> >> > > I even tried both yum and dnf (since yum on centos was giving me
> lots
> >> of
> >> > > grief before and I learned their behaviour differs, especially
when
> it
> >> > > comes to bugs) but none works...
> >> > >
> >> > > >No package ansible-runner-service-dev available.
> >> > > >No match for argument: ansible-runner-service-dev
> >> > >
> >> > > Fedor
> >> > >
> >> > >
> >> > Looks like you're trying to install ovirt-master-snapshot on el7.
> >> > It won't work.
> >> > Master is not supporting el7 anymore.
> >> > You can use 4.3 snapshot rpm at :
> >> >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> >> if
> >> > you need to stay on el7.
> >> >
> >> >
> >> > > ----- Original Message -----
> >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com >
> >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> >> > > Cc: "devel" < devel(a)ovirt.org >
> >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> >> > > Subject: Re: [ovirt-devel] what's up with
ansible-runner-service-dev
> >> > > package?
> >> > >
> >> > > Hi Fedor,
> >> > >
> >> > > Please try:
> >> > > 1. dnf install
> >> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >> > > 2. dnf update
> >> > > 3. dnf install ansible-runner-service-dev
> >> > > 4. flow the instruction from thread 'New dependency for
development
> >> > > environment'
> >> > > The
> >> > >
> >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
fgavrilo(a)redhat.com
>
> >> wrote:
> >> > >
> >> > > > Hi everyone,
> >> > > >
> >> > > > After I screwed up my dev environment beyond repair I have
to
set
> >> it up
> >> > > > again and I see something I haven't last time (CentOS
7):
> >> > > >
> >> > > > $ sudo yum install ansible-runner-service-dev
> >> > > > Loaded plugins: fastestmirror
> >> > > > Loading mirror speeds from cached hostfile
> >> > > > * base: mirror.hosting90.cz
> >> > > > * centos-sclo-rh: mirror.hosting90.cz
> >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> >> > > > * extras: mirror.hosting90.cz
> >> > > > * ovirt-master-epel: mirror.hosting90.cz
> >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> >> > > > * updates: mirror.hosting90.cz
> >> > > > No package ansible-runner-service-dev available.
> >> > > >
> >> > > > Maybe something's missing from my notes, but where did
it go?
> >> Should I
> >> > > add
> >> > > > some repo?
> >> > > >
> >> > > > Fedor
> >> > > > _______________________________________________
> >> > > > Devel mailing list -- devel(a)ovirt.org
> >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > > > oVirt Code of Conduct:
> >> > > > https://www.ovirt.org/community/about/community-guidelines/
> >> > > > List Archives:
> >> > > >
> >> > >
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> >> > > >
> >> > >
> >> > >
> >> > > --
> >> > > Regards,
> >> > > Eyal Shenitzky
> >> > > _______________________________________________
> >> > > Devel mailing list -- devel(a)ovirt.org
> >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > > oVirt Code of Conduct:
> >> > > https://www.ovirt.org/community/about/community-guidelines/
> >> > > List Archives:
> >> > >
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> >> > >
> >> >
> >> >
> >> > --
> >> >
> >> > Sandro Bonazzola
> >> >
> >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> >> >
> >> > Red Hat EMEA < https://www.redhat.com/ >
> >> >
> >> > sbonazzo(a)redhat.com
> >> > < https://www.redhat.com/ >*Red Hat respects your work life
balance.
> >> > Therefore there is no need to answer this email out of your office
> >> hours.
> >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> >> > _______________________________________________
> >> > Devel mailing list -- devel(a)ovirt.org
> >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> > List Archives:
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> >> _______________________________________________
> >> Devel mailing list -- devel(a)ovirt.org
> >> To unsubscribe send an email to devel-leave(a)ovirt.org
> >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> List Archives:
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> >>
> >
> >
> > --
> > Regards,
> > Eyal Shenitzky
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> >
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
1:16 p.m.
New subject: what's up with ansible-runner-service-dev package?
I tried installing python 2 versions of some dependencies in addition to python 3 (as
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc is not clear about it at
all. on Fedora 30 default versions of these libraries you get when not specifying python
vesion in the name are python 2.)
Now error looks slightly different :'D
2020-03-17 11:08:27,294+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID: VDS_INSTALL_FAILED(505),
Host banana installation failed. Internal server error, please check Ansible runner error
log..
Everything else stays the same, host install fails almost immediately.
Does someone have any notes for Fedora 30 install they can share?
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:52:47 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
Sorry, my bad, it was just under my nose. Systemctl is not aware of gunicorn-3, but when I
check journalctl for ansible-runner-service I see the following:
Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] [INFO] Starting
gunicorn 19.9.0
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] [INFO]
Listening at: http://127.0.0.1:50001 (2992)
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992] [INFO] Using
worker: sync
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995] [INFO] Booting
worker with pid: 2995
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997] [INFO] Booting
worker with pid: 2997
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration options from
/etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from environment
variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings overridden
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration options from
/etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from environment
variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings overridden
Is that any suspicious? :)
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:36:40 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
After you start ansible-runner-service service, you should see similar logs in journalctl:
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] [1386] [INFO]
Starting gunicorn 19.9.0
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] [1386] [INFO]
Listening at: http://127.0.0.1:50001 (1386)
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] [1386] [INFO] Using
worker: sync
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100] [1496] [INFO]
Booting worker with pid: 1496
And more if you execute some action from engine (like install new host or upgrade a host)
So does that mean that something was supposed to register it as a service but did not?
Fedor
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
FC30 dev env engine indeed :) I've done this before on other OS,
so unless
there is a blindspot somewhere in my eye it should be configured fine.
[apple@apple ~]$ sudo systemctl status ansible-runner-service
● ansible-runner-service.service - Ansible Runner Service
Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
Main PID: 909 (gunicorn-3)
Tasks: 9 (limit: 4915)
Memory: 193.4M
CGroup: /system.slice/ansible-runner-service.service
├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
-w 2 runner_service.wsgi:application
├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
--private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
--private-key
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
└─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
StrictHostKeyChecking=no -o Port=22 -o
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
-o KbdInteractiveAu>
And the config:
---
version: 1
# playbooks_root_dir
# location of the playbooks that the service will start
playbooks_root_dir:
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
# port
# tcp port for the service to listen to
port: 50001
#
# ip_address
# Specific IP address to bind to
# ip_address: '0.0.0.0'
target_user: root
#event_cache_size: 3
ssh_private_key:
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
/home/apple/ovirt-engine is where engine is dev-installed. Not sure what
else to check now...
Anything strange in journalctl for gunicorn-3 service?
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 2:56:59 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
> Actually, it was too early for me to celebrate.
>
> On Fedora 30, the engine compiles and runs fine, but when I try adding
the
> host installation fails almost immediately and I get the following errors
> in the engine logs:
>
> ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana':
Failed
to
> execute Ansible host-deploy role: Internal server error, please check
> Ansible runner error log.. Please check logs for more details:
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> There is nothing else. There is no file
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> Snapshot I'm using for the host is the same that worked just fine when
> engine was running on CentOS 7 and is CentOS 7 itself. Is that an issue?
>
As you mentioned building engine I assume you are using engine in dev env
on FC30, right? If so, have you manually configured ansible-runner-service
for dev env as mentioned in
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
?
> Thanks,
> Fedor
>
> ----- Original Message -----
> From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> To: "Martin Perina" < mperina(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 12:37:44 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Hi,
>
> Resolved through installing engine on Fedora 30. From what I understand,
> CentOS 7 is not supported anymore.
>
> Fedor
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >, "Eyal
Shenitzky" <
> eshenitz(a)redhat.com >
> Sent: Monday, March 16, 2020 8:11:35 AM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Hi Fedor,
>
> ansible-runner-service-dev package is available from
>
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> repos which is included in ovirt-master-release package, which
> includes all repositories necessary for oVirt development:
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Was your issue resolved or not?
>
> Regards,
> Martin
>
>
>
>
> On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com >
> wrote:
>
> > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> >
> > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com >
wrote:
> >
> >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> >>
> >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> >> wrote:
> >> >
> >> > Hi Sandro,
> >> >
> >> > Thanks for the suggestion, but it seems to not help much.
> >> >
> >> > ansible-runner-service-dev still can't be found, I checked repos
that
> >> are installed from
> >> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> >> and haven't found similarly names packages either...
> >> >
> >> > $ sudo yum install ansible-runner-service-dev
> >> > Loaded plugins: fastestmirror
> >> > Repository centos-sclo-rh-release is listed more than once in the
> >> configuration
> >> > Repository sac-gluster-ansible is listed more than once in the
> >> configuration
> >> > Determining fastest mirrors
> >> > ovirt-4.3-epel/x86_64/metalink
> >>
> >> | 30 kB 00:00:00
> >> > ovirt-master-epel/x86_64/metalink
> >>
> >> | 30 kB 00:00:00
> >> > * base: ftp.sh.cvut.cz
> >> > * centos-sclo-rh: ftp.sh.cvut.cz
> >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> >> > * extras: ftp.sh.cvut.cz
> >> > * ovirt-4.3-epel: mirror.karneval.cz
> >> > * ovirt-4.3-snapshot: ftp.plusline.net
> >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> >> > * ovirt-master-epel: mirror.karneval.cz
> >> > * ovirt-master-snapshot: ftp.plusline.net
> >> > * ovirt-master-snapshot-static: ftp.plusline.net
> >> > * updates: ftp.sh.cvut.cz
> >> > base
> >>
> >> | 3.6 kB 00:00:00
> >> > centos-opstools-release
> >>
> >> | 2.9 kB 00:00:00
> >> > centos-ovirt-common-testing
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-ovirt44-testing
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-qemu-ev-release
> >>
> >> | 3.4 kB 00:00:00
> >> > centos-sclo-rh
> >>
> >> | 3.0 kB 00:00:00
> >> > centos-sclo-rh-release
> >>
> >> | 3.0 kB 00:00:00
> >> > centos-sclo-sclo
> >>
> >> | 2.9 kB 00:00:00
> >> > epel-apache-maven
> >>
> >> | 3.3 kB 00:00:00
> >> > extras
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-gluster6
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-opstools
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-ovirt43
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-centos-qemu-ev
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-4.3-epel
> >>
> >> | 5.3 kB 00:00:00
> >> > ovirt-4.3-snapshot
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-4.3-snapshot-static
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-4.3-virtio-win-latest
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-centos-gluster6
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-master-centos-opstools-testing
> >>
> >> | 2.9 kB 00:00:00
> >> > ovirt-master-epel
> >>
> >> | 5.3 kB 00:00:00
> >> > ovirt-master-snapshot
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-snapshot-static
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirt-master-virtio-win-latest
> >>
> >> | 3.0 kB 00:00:00
> >> > ovirtwebui-ovirt-web-ui-master
> >>
> >> | 3.0 kB 00:00:00
> >> > sac-gluster-ansible
> >>
> >> | 3.3 kB 00:00:00
> >> > updates
> >>
> >> | 2.9 kB 00:00:00
> >> > (1/32): base/7/x86_64/group_gz
> >>
> >> | 165 kB 00:00:00
> >> > (2/32): base/7/x86_64/primary_db
> >>
> >> | 6.0 MB 00:00:00
> >> > (3/32): centos-sclo-rh/x86_64/primary_db
> >>
> >> | 4.2 MB 00:00:00
> >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> >>
> >> | 9.3 kB 00:00:00
> >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> >>
> >> | 344 kB 00:00:00
> >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> >>
> >> | 1.1 kB 00:00:01
> >> > (7/32): extras/7/x86_64/primary_db
> >>
> >> | 164 kB 00:00:00
> >> > (8/32): centos-opstools-release/x86_64/primary_db
> >>
> >> | 429 kB 00:00:01
> >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> >>
> >> | 101 kB 00:00:01
> >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> >>
> >> | 116 kB 00:00:00
> >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> >>
> >> | 73 kB 00:00:00
> >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> >>
> >> | 90 kB 00:00:00
> >> > (13/32): epel-apache-maven/x86_64/primary_db
> >>
> >> | 5.0 kB 00:00:01
> >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> >>
> >> | 1.0 MB 00:00:00
> >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> >>
> >> | 429 kB 00:00:00
> >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> >>
> >> | 211 kB 00:00:00
> >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> >>
> >> | 3.4 kB 00:00:00
> >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> >>
> >> | 109 kB 00:00:00
> >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> >>
> >> | 116 kB 00:00:00
> >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (21/32): ovirt-master-epel/x86_64/group_gz
> >>
> >> | 90 kB 00:00:00
> >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> >>
> >> | 1.0 MB 00:00:00
> >> > (23/32): ovirt-master-snapshot/7/primary_db
> >>
> >> | 54 kB 00:00:00
> >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> >>
> >> | 7.6 kB 00:00:01
> >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> >>
> >> | 4.6 kB 00:00:00
> >> > (26/32): ovirt-master-epel/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> >>
> >> | 7.6 kB 00:00:00
> >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> >>
> >> | 4.2 MB 00:00:03
> >> > (29/32): updates/7/x86_64/primary_db
> >>
> >> | 6.7 MB 00:00:00
> >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> >>
> >> | 611 kB 00:00:01
> >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> >>
> >> | 2.3 kB 00:00:00
> >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> >>
> >> | 13 kB 00:00:00
> >> > No package ansible-runner-service-dev available.
> >> > Error: Nothing to do
> >> >
> >> >
> >> > Fedor
> >> >
> >> > ----- Original Message -----
> >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com >
> >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >,
"devel" <
devel(a)ovirt.org >
> >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> >> > Subject: Re: [ovirt-devel] Re: what's up with
> >> ansible-runner-service-dev package?
> >> >
> >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> >> fgavrilo(a)redhat.com >
> >> > ha scritto:
> >> >
> >> > > Thanks for the response, Eyal!
> >> > >
> >> > > I already had ovirt-master repo installed, but updated everything
> >> just in
> >> > > case.
> >> > > I even tried both yum and dnf (since yum on centos was giving me
> lots
> >> of
> >> > > grief before and I learned their behaviour differs, especially
when
> it
> >> > > comes to bugs) but none works...
> >> > >
> >> > > >No package ansible-runner-service-dev available.
> >> > > >No match for argument: ansible-runner-service-dev
> >> > >
> >> > > Fedor
> >> > >
> >> > >
> >> > Looks like you're trying to install ovirt-master-snapshot on el7.
> >> > It won't work.
> >> > Master is not supporting el7 anymore.
> >> > You can use 4.3 snapshot rpm at :
> >> >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> >> if
> >> > you need to stay on el7.
> >> >
> >> >
> >> > > ----- Original Message -----
> >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com >
> >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> >> > > Cc: "devel" < devel(a)ovirt.org >
> >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> >> > > Subject: Re: [ovirt-devel] what's up with
ansible-runner-service-dev
> >> > > package?
> >> > >
> >> > > Hi Fedor,
> >> > >
> >> > > Please try:
> >> > > 1. dnf install
> >> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >> > > 2. dnf update
> >> > > 3. dnf install ansible-runner-service-dev
> >> > > 4. flow the instruction from thread 'New dependency for
development
> >> > > environment'
> >> > > The
> >> > >
> >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
fgavrilo(a)redhat.com
>
> >> wrote:
> >> > >
> >> > > > Hi everyone,
> >> > > >
> >> > > > After I screwed up my dev environment beyond repair I have
to
set
> >> it up
> >> > > > again and I see something I haven't last time (CentOS
7):
> >> > > >
> >> > > > $ sudo yum install ansible-runner-service-dev
> >> > > > Loaded plugins: fastestmirror
> >> > > > Loading mirror speeds from cached hostfile
> >> > > > * base: mirror.hosting90.cz
> >> > > > * centos-sclo-rh: mirror.hosting90.cz
> >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> >> > > > * extras: mirror.hosting90.cz
> >> > > > * ovirt-master-epel: mirror.hosting90.cz
> >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> >> > > > * updates: mirror.hosting90.cz
> >> > > > No package ansible-runner-service-dev available.
> >> > > >
> >> > > > Maybe something's missing from my notes, but where did
it go?
> >> Should I
> >> > > add
> >> > > > some repo?
> >> > > >
> >> > > > Fedor
> >> > > > _______________________________________________
> >> > > > Devel mailing list -- devel(a)ovirt.org
> >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > > > oVirt Code of Conduct:
> >> > > > https://www.ovirt.org/community/about/community-guidelines/
> >> > > > List Archives:
> >> > > >
> >> > >
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> >> > > >
> >> > >
> >> > >
> >> > > --
> >> > > Regards,
> >> > > Eyal Shenitzky
> >> > > _______________________________________________
> >> > > Devel mailing list -- devel(a)ovirt.org
> >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > > oVirt Code of Conduct:
> >> > > https://www.ovirt.org/community/about/community-guidelines/
> >> > > List Archives:
> >> > >
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> >> > >
> >> >
> >> >
> >> > --
> >> >
> >> > Sandro Bonazzola
> >> >
> >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> >> >
> >> > Red Hat EMEA < https://www.redhat.com/ >
> >> >
> >> > sbonazzo(a)redhat.com
> >> > < https://www.redhat.com/ >*Red Hat respects your work life
balance.
> >> > Therefore there is no need to answer this email out of your office
> >> hours.
> >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> >> > _______________________________________________
> >> > Devel mailing list -- devel(a)ovirt.org
> >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> > oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> > List Archives:
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> >> _______________________________________________
> >> Devel mailing list -- devel(a)ovirt.org
> >> To unsubscribe send an email to devel-leave(a)ovirt.org
> >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> List Archives:
> >>
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> >>
> >
> >
> > --
> > Regards,
> > Eyal Shenitzky
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> >
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
1:34 p.m.
A while back even i was getting the same error, but when i looked closely ,
i found that it was executing the ansible playbook,even though it just
shows failure in the log, not sure if this is the same case with you ,
maybe you can confirm by tailing ansible runner logs in journalctl while
adding host,
you can tailf ansible-runer-service from journalctl ,( it goes something
like 'journalctl -U ansible-runner-service")
Regards,
Prajith K Prasad
On Tue, Mar 17, 2020 at 3:48 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
I tried installing python 2 versions of some dependencies in addition
to
python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
is not clear about it at all. on Fedora 30 default versions of these
libraries you get when not specifying python vesion in the name are python
2.)
Now error looks slightly different :'D
2020-03-17 11:08:27,294+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
error, please check Ansible runner error log..
Everything else stays the same, host install fails almost immediately.
Does someone have any notes for Fedora 30 install they can share?
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:52:47 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Sorry, my bad, it was just under my nose. Systemctl is not aware of
gunicorn-3, but when I check journalctl for ansible-runner-service I see
the following:
Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Starting gunicorn 19.9.0
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Listening at: http://127.0.0.1:50001 (2992)
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Using worker: sync
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995]
[INFO] Booting worker with pid: 2995
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997]
[INFO] Booting worker with pid: 2997
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Is that any suspicious? :)
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:36:40 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
After you start ansible-runner-service service, you should see similar
logs in journalctl:
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Starting gunicorn 19.9.0
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Using worker: sync
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1496] [INFO] Booting worker with pid: 1496
And more if you execute some action from engine (like install new host or
upgrade a host)
So does that mean that something was supposed to register it as a service
but did not?
Fedor
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
> FC30 dev env engine indeed :) I've done this before on other OS, so
unless
> there is a blindspot somewhere in my eye it should be configured fine.
>
> [apple@apple ~]$ sudo systemctl status ansible-runner-service
> ● ansible-runner-service.service - Ansible Runner Service
> Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> enabled; vendor preset: disabled)
> Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> Main PID: 909 (gunicorn-3)
> Tasks: 9 (limit: 4915)
> Memory: 193.4M
> CGroup: /system.slice/ansible-runner-service.service
> ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> StrictHostKeyChecking=no -o Port=22 -o
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> -o KbdInteractiveAu>
>
> And the config:
>
> ---
> version: 1
>
> # playbooks_root_dir
> # location of the playbooks that the service will start
> playbooks_root_dir:
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> # port
> # tcp port for the service to listen to
> port: 50001
> #
> # ip_address
> # Specific IP address to bind to
> # ip_address: '0.0.0.0'
> target_user: root
> #event_cache_size: 3
> ssh_private_key:
> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
>
> /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> else to check now...
>
Anything strange in journalctl for gunicorn-3 service?
>
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 2:56:59 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > Actually, it was too early for me to celebrate.
> >
> > On Fedora 30, the engine compiles and runs fine, but when I try adding
> the
> > host installation fails almost immediately and I get the following
errors
> > in the engine logs:
> >
> > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
Failed
> to
> > execute Ansible host-deploy role: Internal server error, please check
> > Ansible runner error log.. Please check logs for more details:
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > There is nothing else. There is no file
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > Snapshot I'm using for the host is the same that worked just fine when
> > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
issue?
> >
>
> As you mentioned building engine I assume you are using engine in dev
env
> on FC30, right? If so, have you manually configured
ansible-runner-service
> for dev env as mentioned in
>
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> ?
>
>
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > To: "Martin Perina" < mperina(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 12:37:44 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Hi,
> >
> > Resolved through installing engine on Fedora 30. From what I
understand,
> > CentOS 7 is not supported anymore.
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
<
> > eshenitz(a)redhat.com >
> > Sent: Monday, March 16, 2020 8:11:35 AM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > Hi Fedor,
> >
> > ansible-runner-service-dev package is available from
> >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > repos which is included in ovirt-master-release package, which
> > includes all repositories necessary for oVirt development:
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >
> > Was your issue resolved or not?
> >
> > Regards,
> > Martin
> >
> >
> >
> >
> > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
>
> > wrote:
> >
> > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > >
> > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com >
> wrote:
> > >
> > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > >>
> > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
fgavrilo(a)redhat.com >
> > >> wrote:
> > >> >
> > >> > Hi Sandro,
> > >> >
> > >> > Thanks for the suggestion, but it seems to not help much.
> > >> >
> > >> > ansible-runner-service-dev still can't be found, I checked
repos
> that
> > >> are installed from
> > >>
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> and haven't found similarly names packages either...
> > >> >
> > >> > $ sudo yum install ansible-runner-service-dev
> > >> > Loaded plugins: fastestmirror
> > >> > Repository centos-sclo-rh-release is listed more than once in
the
> > >> configuration
> > >> > Repository sac-gluster-ansible is listed more than once in the
> > >> configuration
> > >> > Determining fastest mirrors
> > >> > ovirt-4.3-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > ovirt-master-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > * base: ftp.sh.cvut.cz
> > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > >> > * extras: ftp.sh.cvut.cz
> > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > >> > * ovirt-master-epel: mirror.karneval.cz
> > >> > * ovirt-master-snapshot: ftp.plusline.net
> > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > >> > * updates: ftp.sh.cvut.cz
> > >> > base
> > >>
> > >> | 3.6 kB 00:00:00
> > >> > centos-opstools-release
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > centos-ovirt-common-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-ovirt44-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-qemu-ev-release
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-sclo-rh
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-rh-release
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-sclo
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > epel-apache-maven
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > extras
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-opstools
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-ovirt43
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-qemu-ev
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-4.3-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-centos-opstools-testing
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-master-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirtwebui-ovirt-web-ui-master
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > sac-gluster-ansible
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > updates
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > (1/32): base/7/x86_64/group_gz
> > >>
> > >> | 165 kB 00:00:00
> > >> > (2/32): base/7/x86_64/primary_db
> > >>
> > >> | 6.0 MB 00:00:00
> > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:00
> > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > >>
> > >> | 9.3 kB 00:00:00
> > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > >>
> > >> | 344 kB 00:00:00
> > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > >>
> > >> | 1.1 kB 00:00:01
> > >> > (7/32): extras/7/x86_64/primary_db
> > >>
> > >> | 164 kB 00:00:00
> > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:01
> > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > >>
> > >> | 101 kB 00:00:01
> > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > >>
> > >> | 73 kB 00:00:00
> > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > >>
> > >> | 5.0 kB 00:00:01
> > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:00
> > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > >>
> > >> | 211 kB 00:00:00
> > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > >>
> > >> | 109 kB 00:00:00
> > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > >>
> > >> | 54 kB 00:00:00
> > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:01
> > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > >>
> > >> | 4.6 kB 00:00:00
> > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:00
> > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:03
> > >> > (29/32): updates/7/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> > >>
> > >> | 611 kB 00:00:01
> > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > >>
> > >> | 2.3 kB 00:00:00
> > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > >>
> > >> | 13 kB 00:00:00
> > >> > No package ansible-runner-service-dev available.
> > >> > Error: Nothing to do
> > >> >
> > >> >
> > >> > Fedor
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com >
> > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > >> ansible-runner-service-dev package?
> > >> >
> > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> > >> fgavrilo(a)redhat.com >
> > >> > ha scritto:
> > >> >
> > >> > > Thanks for the response, Eyal!
> > >> > >
> > >> > > I already had ovirt-master repo installed, but updated
everything
> > >> just in
> > >> > > case.
> > >> > > I even tried both yum and dnf (since yum on centos was
giving
me
> > lots
> > >> of
> > >> > > grief before and I learned their behaviour differs,
especially
> when
> > it
> > >> > > comes to bugs) but none works...
> > >> > >
> > >> > > >No package ansible-runner-service-dev available.
> > >> > > >No match for argument: ansible-runner-service-dev
> > >> > >
> > >> > > Fedor
> > >> > >
> > >> > >
> > >> > Looks like you're trying to install ovirt-master-snapshot on
el7.
> > >> > It won't work.
> > >> > Master is not supporting el7 anymore.
> > >> > You can use 4.3 snapshot rpm at :
> > >> >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> if
> > >> > you need to stay on el7.
> > >> >
> > >> >
> > >> > > ----- Original Message -----
> > >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com
>
> > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > >> > > Cc: "devel" < devel(a)ovirt.org >
> > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > >> > > Subject: Re: [ovirt-devel] what's up with
> ansible-runner-service-dev
> > >> > > package?
> > >> > >
> > >> > > Hi Fedor,
> > >> > >
> > >> > > Please try:
> > >> > > 1. dnf install
> > >> > >
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >> > > 2. dnf update
> > >> > > 3. dnf install ansible-runner-service-dev
> > >> > > 4. flow the instruction from thread 'New dependency for
> development
> > >> > > environment'
> > >> > > The
> > >> > >
> > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > >> wrote:
> > >> > >
> > >> > > > Hi everyone,
> > >> > > >
> > >> > > > After I screwed up my dev environment beyond repair I
have to
> set
> > >> it up
> > >> > > > again and I see something I haven't last time
(CentOS 7):
> > >> > > >
> > >> > > > $ sudo yum install ansible-runner-service-dev
> > >> > > > Loaded plugins: fastestmirror
> > >> > > > Loading mirror speeds from cached hostfile
> > >> > > > * base: mirror.hosting90.cz
> > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > >> > > > * extras: mirror.hosting90.cz
> > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > >> > > > * updates: mirror.hosting90.cz
> > >> > > > No package ansible-runner-service-dev available.
> > >> > > >
> > >> > > > Maybe something's missing from my notes, but where
did it go?
> > >> Should I
> > >> > > add
> > >> > > > some repo?
> > >> > > >
> > >> > > > Fedor
> > >> > > > _______________________________________________
> > >> > > > Devel mailing list -- devel(a)ovirt.org
> > >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > > oVirt Code of Conduct:
> > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > >> > > > List Archives:
> > >> > > >
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > >> > > >
> > >> > >
> > >> > >
> > >> > > --
> > >> > > Regards,
> > >> > > Eyal Shenitzky
> > >> > > _______________________________________________
> > >> > > Devel mailing list -- devel(a)ovirt.org
> > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > oVirt Code of Conduct:
> > >> > > https://www.ovirt.org/community/about/community-guidelines/
> > >> > > List Archives:
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >> > >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> > Sandro Bonazzola
> > >> >
> > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > >> >
> > >> > Red Hat EMEA < https://www.redhat.com/ >
> > >> >
> > >> > sbonazzo(a)redhat.com
> > >> > < https://www.redhat.com/ >*Red Hat respects your work
life
balance.
> > >> > Therefore there is no need to answer this email out of your
office
> > >> hours.
> > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > >> > _______________________________________________
> > >> > Devel mailing list -- devel(a)ovirt.org
> > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> > oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> > List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > >> _______________________________________________
> > >> Devel mailing list -- devel(a)ovirt.org
> > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > >>
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
2:01 p.m.
New subject: what's up with ansible-runner-service-dev package?
Ah, thanks!
That's interesting since there is a 'fatal' in the journalctl about something
called fluentd & collectd-syslog which is probably why there were no logs.
And before that, even more interesting error reports about python2-dnf and iptables
(what):
Mar 17 11:09:38 apple gunicorn-3[907]: cb_event_handler event_data={'uuid':
'6089e25d-df9a-4d95-a7c3-0e0e97921de2', 'counter': 30, 'stdout':
'fatal: [banana]: FAILED! => {"changed": false, "msg":
"`python2-dnf` is not installed, but it is requiredfor the Ansible dnf module.",
"results": []}', 'start_line': 29, 'end_line': 30,
'runner_ident': '6686b3e2-6837-11ea-ad00-52540014ccc0', 'event':
'runner_on_failed', 'event_data': {'playbook':
'ovirt-host-remove.yml', 'playbook_uuid':
'c078f033-f214-4cb4-ae34-ca266e9fa6a7', 'play': 'all',
'play_uuid': '52540014-ccc0-1741-81d0-000000000006',
'play_pattern': 'all', 'task': 'Check if
ovirt-provider-ovn-driver is installed', 'task_uuid':
'52540014-ccc0-1741-81d0-000000000017', 'task_action': 'package',
'task_args': '', 'task_path':
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-provider-ovn-driver/tasks/unconfigure.yml:2',
'role': 'ovirt-provider-ovn-driver', 'host': 'banana',
'remote_addr': 'banana', 'res': {'msg': '`python2-dnf`
is not installed, but it is requiredfor the Ansible dnf module.', 'results':
[], 'invocation': {'module_args': {'lock_timeout': 30,
'update_cache': False, 'disable_excludes': None, 'exclude': [],
'allow_downgrade': False, 'disable_gpg_check': False, 'conf_file':
None, 'state': 'present', 'disablerepo': [], 'releasever':
None, 'skip_broken': False, 'autoremove': False, 'download_dir':
None, 'enable_plugin': [], 'installroot': '/',
'install_weak_deps': True, 'name': ['ovirt-provider-ovn-driver'],
'download_only': False, 'bugfix': False, 'list': None,
'install_repoquery': True, 'update_only': False, 'disable_plugin':
[], 'enablerepo': [], 'security': False, 'validate_certs': True}},
'_ansible_no_log': False, 'changed': False}, 'ignore_errors':
None, 'event_loop': None, 'pid': 1689}, 'pid': 1689,
'created': '2020-03-17T10:09:38.283967', 'parent_uuid':
'52540014-ccc0-1741-81d0-000000000017'}
Mar 17 11:11:48 apple gunicorn-3[907]: cb_event_handler event_data={'uuid':
'32342b4e-d472-497b-b84f-7222cd143b7e', 'counter': 254, 'stdout':
'fatal: [banana]: FAILED! => {"changed": false, "msg":
"Could not find the requested service iptables: host"}\r\n...ignoring',
'start_line': 248, 'end_line': 250, 'runner_ident':
'3ea7dde2-6837-11ea-ad00-52540014ccc0', 'event':
'runner_on_failed', 'event_data': {'playbook':
'ovirt-host-deploy.yml', 'playbook_uuid':
'117a9a38-d62b-493d-90fb-cd436da760ec', 'play': 'all',
'play_uuid': '52540014-ccc0-350b-8134-000000000006',
'play_pattern': 'all', 'task': 'Stop iptables service if
running', 'task_uuid': '52540014-ccc0-350b-8134-000000000041',
'task_action': 'service', 'task_args': '',
'task_path':
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-firewalld/tasks/main.yml:3',
'role': 'ovirt-host-deploy-firewalld', 'host': 'banana',
'remote_addr': 'banana', 'res': {'msg': 'Could not
find the requested service iptables: host', 'invocation':
{'module_args': {'name': 'iptables', 'state':
'stopped', 'enabled': False, 'daemon_reload': False,
'daemon_reexec': False, 'no_block': False, 'force': None,
'masked': None, 'user': None, 'scope': None}},
'_ansible_no_log': False, 'changed': False}, 'ignore_errors':
True, 'event_loop': None, 'pid': 1642}, 'pid': 1642,
'created': '2020-03-17T10:11:48.982374', 'parent_uuid':
'52540014-ccc0-350b-8134-000000000041'}
Does that mean host-to-be is to blame? And if so and that looks like a dependency issue
again, should I replace good old CentOS 7 with even better CentOS 8 or what OS are you
guys using?
Fedor
----- Original Message -----
From: "Prajith Kesava Prasad" <pkesavap(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Tuesday, March 17, 2020 11:34:13 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
A while back even i was getting the same error, but when i looked closely ,
i found that it was executing the ansible playbook,even though it just
shows failure in the log, not sure if this is the same case with you ,
maybe you can confirm by tailing ansible runner logs in journalctl while
adding host,
you can tailf ansible-runer-service from journalctl ,( it goes something
like 'journalctl -U ansible-runner-service")
Regards,
Prajith K Prasad
On Tue, Mar 17, 2020 at 3:48 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
I tried installing python 2 versions of some dependencies in addition
to
python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
is not clear about it at all. on Fedora 30 default versions of these
libraries you get when not specifying python vesion in the name are python
2.)
Now error looks slightly different :'D
2020-03-17 11:08:27,294+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
error, please check Ansible runner error log..
Everything else stays the same, host install fails almost immediately.
Does someone have any notes for Fedora 30 install they can share?
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:52:47 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Sorry, my bad, it was just under my nose. Systemctl is not aware of
gunicorn-3, but when I check journalctl for ansible-runner-service I see
the following:
Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Starting gunicorn 19.9.0
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Listening at: http://127.0.0.1:50001 (2992)
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Using worker: sync
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995]
[INFO] Booting worker with pid: 2995
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997]
[INFO] Booting worker with pid: 2997
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Is that any suspicious? :)
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:36:40 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
After you start ansible-runner-service service, you should see similar
logs in journalctl:
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Starting gunicorn 19.9.0
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Using worker: sync
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1496] [INFO] Booting worker with pid: 1496
And more if you execute some action from engine (like install new host or
upgrade a host)
So does that mean that something was supposed to register it as a service
but did not?
Fedor
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
> FC30 dev env engine indeed :) I've done this before on other OS, so
unless
> there is a blindspot somewhere in my eye it should be configured fine.
>
> [apple@apple ~]$ sudo systemctl status ansible-runner-service
> ● ansible-runner-service.service - Ansible Runner Service
> Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> enabled; vendor preset: disabled)
> Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> Main PID: 909 (gunicorn-3)
> Tasks: 9 (limit: 4915)
> Memory: 193.4M
> CGroup: /system.slice/ansible-runner-service.service
> ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> StrictHostKeyChecking=no -o Port=22 -o
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> -o KbdInteractiveAu>
>
> And the config:
>
> ---
> version: 1
>
> # playbooks_root_dir
> # location of the playbooks that the service will start
> playbooks_root_dir:
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> # port
> # tcp port for the service to listen to
> port: 50001
> #
> # ip_address
> # Specific IP address to bind to
> # ip_address: '0.0.0.0'
> target_user: root
> #event_cache_size: 3
> ssh_private_key:
> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
>
> /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> else to check now...
>
Anything strange in journalctl for gunicorn-3 service?
>
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 2:56:59 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > Actually, it was too early for me to celebrate.
> >
> > On Fedora 30, the engine compiles and runs fine, but when I try adding
> the
> > host installation fails almost immediately and I get the following
errors
> > in the engine logs:
> >
> > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
Failed
> to
> > execute Ansible host-deploy role: Internal server error, please check
> > Ansible runner error log.. Please check logs for more details:
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > There is nothing else. There is no file
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > Snapshot I'm using for the host is the same that worked just fine when
> > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
issue?
> >
>
> As you mentioned building engine I assume you are using engine in dev
env
> on FC30, right? If so, have you manually configured
ansible-runner-service
> for dev env as mentioned in
>
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> ?
>
>
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > To: "Martin Perina" < mperina(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 12:37:44 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Hi,
> >
> > Resolved through installing engine on Fedora 30. From what I
understand,
> > CentOS 7 is not supported anymore.
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
<
> > eshenitz(a)redhat.com >
> > Sent: Monday, March 16, 2020 8:11:35 AM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > Hi Fedor,
> >
> > ansible-runner-service-dev package is available from
> >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > repos which is included in ovirt-master-release package, which
> > includes all repositories necessary for oVirt development:
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >
> > Was your issue resolved or not?
> >
> > Regards,
> > Martin
> >
> >
> >
> >
> > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
>
> > wrote:
> >
> > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > >
> > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com >
> wrote:
> > >
> > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > >>
> > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
fgavrilo(a)redhat.com >
> > >> wrote:
> > >> >
> > >> > Hi Sandro,
> > >> >
> > >> > Thanks for the suggestion, but it seems to not help much.
> > >> >
> > >> > ansible-runner-service-dev still can't be found, I checked
repos
> that
> > >> are installed from
> > >>
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> and haven't found similarly names packages either...
> > >> >
> > >> > $ sudo yum install ansible-runner-service-dev
> > >> > Loaded plugins: fastestmirror
> > >> > Repository centos-sclo-rh-release is listed more than once in
the
> > >> configuration
> > >> > Repository sac-gluster-ansible is listed more than once in the
> > >> configuration
> > >> > Determining fastest mirrors
> > >> > ovirt-4.3-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > ovirt-master-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > * base: ftp.sh.cvut.cz
> > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > >> > * extras: ftp.sh.cvut.cz
> > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > >> > * ovirt-master-epel: mirror.karneval.cz
> > >> > * ovirt-master-snapshot: ftp.plusline.net
> > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > >> > * updates: ftp.sh.cvut.cz
> > >> > base
> > >>
> > >> | 3.6 kB 00:00:00
> > >> > centos-opstools-release
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > centos-ovirt-common-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-ovirt44-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-qemu-ev-release
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-sclo-rh
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-rh-release
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-sclo
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > epel-apache-maven
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > extras
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-opstools
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-ovirt43
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-qemu-ev
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-4.3-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-centos-opstools-testing
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-master-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirtwebui-ovirt-web-ui-master
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > sac-gluster-ansible
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > updates
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > (1/32): base/7/x86_64/group_gz
> > >>
> > >> | 165 kB 00:00:00
> > >> > (2/32): base/7/x86_64/primary_db
> > >>
> > >> | 6.0 MB 00:00:00
> > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:00
> > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > >>
> > >> | 9.3 kB 00:00:00
> > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > >>
> > >> | 344 kB 00:00:00
> > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > >>
> > >> | 1.1 kB 00:00:01
> > >> > (7/32): extras/7/x86_64/primary_db
> > >>
> > >> | 164 kB 00:00:00
> > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:01
> > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > >>
> > >> | 101 kB 00:00:01
> > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > >>
> > >> | 73 kB 00:00:00
> > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > >>
> > >> | 5.0 kB 00:00:01
> > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:00
> > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > >>
> > >> | 211 kB 00:00:00
> > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > >>
> > >> | 109 kB 00:00:00
> > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > >>
> > >> | 54 kB 00:00:00
> > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:01
> > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > >>
> > >> | 4.6 kB 00:00:00
> > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:00
> > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:03
> > >> > (29/32): updates/7/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> > >>
> > >> | 611 kB 00:00:01
> > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > >>
> > >> | 2.3 kB 00:00:00
> > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > >>
> > >> | 13 kB 00:00:00
> > >> > No package ansible-runner-service-dev available.
> > >> > Error: Nothing to do
> > >> >
> > >> >
> > >> > Fedor
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com >
> > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > >> ansible-runner-service-dev package?
> > >> >
> > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> > >> fgavrilo(a)redhat.com >
> > >> > ha scritto:
> > >> >
> > >> > > Thanks for the response, Eyal!
> > >> > >
> > >> > > I already had ovirt-master repo installed, but updated
everything
> > >> just in
> > >> > > case.
> > >> > > I even tried both yum and dnf (since yum on centos was
giving
me
> > lots
> > >> of
> > >> > > grief before and I learned their behaviour differs,
especially
> when
> > it
> > >> > > comes to bugs) but none works...
> > >> > >
> > >> > > >No package ansible-runner-service-dev available.
> > >> > > >No match for argument: ansible-runner-service-dev
> > >> > >
> > >> > > Fedor
> > >> > >
> > >> > >
> > >> > Looks like you're trying to install ovirt-master-snapshot on
el7.
> > >> > It won't work.
> > >> > Master is not supporting el7 anymore.
> > >> > You can use 4.3 snapshot rpm at :
> > >> >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> if
> > >> > you need to stay on el7.
> > >> >
> > >> >
> > >> > > ----- Original Message -----
> > >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com
>
> > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > >> > > Cc: "devel" < devel(a)ovirt.org >
> > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > >> > > Subject: Re: [ovirt-devel] what's up with
> ansible-runner-service-dev
> > >> > > package?
> > >> > >
> > >> > > Hi Fedor,
> > >> > >
> > >> > > Please try:
> > >> > > 1. dnf install
> > >> > >
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >> > > 2. dnf update
> > >> > > 3. dnf install ansible-runner-service-dev
> > >> > > 4. flow the instruction from thread 'New dependency for
> development
> > >> > > environment'
> > >> > > The
> > >> > >
> > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > >> wrote:
> > >> > >
> > >> > > > Hi everyone,
> > >> > > >
> > >> > > > After I screwed up my dev environment beyond repair I
have to
> set
> > >> it up
> > >> > > > again and I see something I haven't last time
(CentOS 7):
> > >> > > >
> > >> > > > $ sudo yum install ansible-runner-service-dev
> > >> > > > Loaded plugins: fastestmirror
> > >> > > > Loading mirror speeds from cached hostfile
> > >> > > > * base: mirror.hosting90.cz
> > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > >> > > > * extras: mirror.hosting90.cz
> > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > >> > > > * updates: mirror.hosting90.cz
> > >> > > > No package ansible-runner-service-dev available.
> > >> > > >
> > >> > > > Maybe something's missing from my notes, but where
did it go?
> > >> Should I
> > >> > > add
> > >> > > > some repo?
> > >> > > >
> > >> > > > Fedor
> > >> > > > _______________________________________________
> > >> > > > Devel mailing list -- devel(a)ovirt.org
> > >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > > oVirt Code of Conduct:
> > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > >> > > > List Archives:
> > >> > > >
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > >> > > >
> > >> > >
> > >> > >
> > >> > > --
> > >> > > Regards,
> > >> > > Eyal Shenitzky
> > >> > > _______________________________________________
> > >> > > Devel mailing list -- devel(a)ovirt.org
> > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > oVirt Code of Conduct:
> > >> > > https://www.ovirt.org/community/about/community-guidelines/
> > >> > > List Archives:
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >> > >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> > Sandro Bonazzola
> > >> >
> > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > >> >
> > >> > Red Hat EMEA < https://www.redhat.com/ >
> > >> >
> > >> > sbonazzo(a)redhat.com
> > >> > < https://www.redhat.com/ >*Red Hat respects your work
life
balance.
> > >> > Therefore there is no need to answer this email out of your
office
> > >> hours.
> > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > >> > _______________________________________________
> > >> > Devel mailing list -- devel(a)ovirt.org
> > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> > oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> > List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > >> _______________________________________________
> > >> Devel mailing list -- devel(a)ovirt.org
> > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > >>
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
2:49 p.m.
On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
I tried installing python 2 versions of some dependencies in addition
to
python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
is not clear about it at all. on Fedora 30 default versions of these
libraries you get when not specifying python vesion in the name are python
2.)
Now error looks slightly different :'D
2020-03-17 11:08:27,294+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
error, please check Ansible runner error log..
Everything else stays the same, host install fails almost immediately.
Does someone have any notes for Fedora 30 install they can share?
I start seeing it too:
ansible-runner-service-dev-1.0.1-1.fc30.noarch
python3-ansible-runner-1.3.4-2.fc30.noarch
engine:
http://pastebin.test.redhat.com/845373
of course no ansible log..
This is what journalctl show:
http://pastebin.test.redhat.com/845375
After doing some debugging in the engine, after setting a breakpoint in
AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over
until the execution (lines 139-147) it does work. Without breaking point
and making things slower it throws the error.
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:52:47 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Sorry, my bad, it was just under my nose. Systemctl is not aware of
gunicorn-3, but when I check journalctl for ansible-runner-service I see
the following:
Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Starting gunicorn 19.9.0
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Listening at: http://127.0.0.1:50001 (2992)
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Using worker: sync
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995]
[INFO] Booting worker with pid: 2995
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997]
[INFO] Booting worker with pid: 2997
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Is that any suspicious? :)
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:36:40 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
After you start ansible-runner-service service, you should see similar
logs in journalctl:
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Starting gunicorn 19.9.0
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Using worker: sync
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1496] [INFO] Booting worker with pid: 1496
And more if you execute some action from engine (like install new host or
upgrade a host)
So does that mean that something was supposed to register it as a service
but did not?
Fedor
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
> FC30 dev env engine indeed :) I've done this before on other OS, so
unless
> there is a blindspot somewhere in my eye it should be configured fine.
>
> [apple@apple ~]$ sudo systemctl status ansible-runner-service
> ● ansible-runner-service.service - Ansible Runner Service
> Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> enabled; vendor preset: disabled)
> Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> Main PID: 909 (gunicorn-3)
> Tasks: 9 (limit: 4915)
> Memory: 193.4M
> CGroup: /system.slice/ansible-runner-service.service
> ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> StrictHostKeyChecking=no -o Port=22 -o
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> -o KbdInteractiveAu>
>
> And the config:
>
> ---
> version: 1
>
> # playbooks_root_dir
> # location of the playbooks that the service will start
> playbooks_root_dir:
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> # port
> # tcp port for the service to listen to
> port: 50001
> #
> # ip_address
> # Specific IP address to bind to
> # ip_address: '0.0.0.0'
> target_user: root
> #event_cache_size: 3
> ssh_private_key:
> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
>
> /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> else to check now...
>
Anything strange in journalctl for gunicorn-3 service?
>
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 2:56:59 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > Actually, it was too early for me to celebrate.
> >
> > On Fedora 30, the engine compiles and runs fine, but when I try adding
> the
> > host installation fails almost immediately and I get the following
errors
> > in the engine logs:
> >
> > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
Failed
> to
> > execute Ansible host-deploy role: Internal server error, please check
> > Ansible runner error log.. Please check logs for more details:
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > There is nothing else. There is no file
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > Snapshot I'm using for the host is the same that worked just fine when
> > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
issue?
> >
>
> As you mentioned building engine I assume you are using engine in dev
env
> on FC30, right? If so, have you manually configured
ansible-runner-service
> for dev env as mentioned in
>
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> ?
>
>
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > To: "Martin Perina" < mperina(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 12:37:44 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Hi,
> >
> > Resolved through installing engine on Fedora 30. From what I
understand,
> > CentOS 7 is not supported anymore.
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
<
> > eshenitz(a)redhat.com >
> > Sent: Monday, March 16, 2020 8:11:35 AM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > Hi Fedor,
> >
> > ansible-runner-service-dev package is available from
> >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > repos which is included in ovirt-master-release package, which
> > includes all repositories necessary for oVirt development:
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >
> > Was your issue resolved or not?
> >
> > Regards,
> > Martin
> >
> >
> >
> >
> > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
>
> > wrote:
> >
> > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > >
> > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com >
> wrote:
> > >
> > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > >>
> > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
fgavrilo(a)redhat.com >
> > >> wrote:
> > >> >
> > >> > Hi Sandro,
> > >> >
> > >> > Thanks for the suggestion, but it seems to not help much.
> > >> >
> > >> > ansible-runner-service-dev still can't be found, I checked
repos
> that
> > >> are installed from
> > >>
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> and haven't found similarly names packages either...
> > >> >
> > >> > $ sudo yum install ansible-runner-service-dev
> > >> > Loaded plugins: fastestmirror
> > >> > Repository centos-sclo-rh-release is listed more than once in
the
> > >> configuration
> > >> > Repository sac-gluster-ansible is listed more than once in the
> > >> configuration
> > >> > Determining fastest mirrors
> > >> > ovirt-4.3-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > ovirt-master-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > * base: ftp.sh.cvut.cz
> > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > >> > * extras: ftp.sh.cvut.cz
> > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > >> > * ovirt-master-epel: mirror.karneval.cz
> > >> > * ovirt-master-snapshot: ftp.plusline.net
> > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > >> > * updates: ftp.sh.cvut.cz
> > >> > base
> > >>
> > >> | 3.6 kB 00:00:00
> > >> > centos-opstools-release
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > centos-ovirt-common-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-ovirt44-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-qemu-ev-release
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-sclo-rh
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-rh-release
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-sclo
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > epel-apache-maven
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > extras
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-opstools
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-ovirt43
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-qemu-ev
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-4.3-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-centos-opstools-testing
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-master-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirtwebui-ovirt-web-ui-master
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > sac-gluster-ansible
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > updates
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > (1/32): base/7/x86_64/group_gz
> > >>
> > >> | 165 kB 00:00:00
> > >> > (2/32): base/7/x86_64/primary_db
> > >>
> > >> | 6.0 MB 00:00:00
> > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:00
> > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > >>
> > >> | 9.3 kB 00:00:00
> > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > >>
> > >> | 344 kB 00:00:00
> > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > >>
> > >> | 1.1 kB 00:00:01
> > >> > (7/32): extras/7/x86_64/primary_db
> > >>
> > >> | 164 kB 00:00:00
> > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:01
> > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > >>
> > >> | 101 kB 00:00:01
> > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > >>
> > >> | 73 kB 00:00:00
> > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > >>
> > >> | 5.0 kB 00:00:01
> > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:00
> > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > >>
> > >> | 211 kB 00:00:00
> > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > >>
> > >> | 109 kB 00:00:00
> > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > >>
> > >> | 54 kB 00:00:00
> > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:01
> > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > >>
> > >> | 4.6 kB 00:00:00
> > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:00
> > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:03
> > >> > (29/32): updates/7/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> > >>
> > >> | 611 kB 00:00:01
> > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > >>
> > >> | 2.3 kB 00:00:00
> > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > >>
> > >> | 13 kB 00:00:00
> > >> > No package ansible-runner-service-dev available.
> > >> > Error: Nothing to do
> > >> >
> > >> >
> > >> > Fedor
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com >
> > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > >> ansible-runner-service-dev package?
> > >> >
> > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> > >> fgavrilo(a)redhat.com >
> > >> > ha scritto:
> > >> >
> > >> > > Thanks for the response, Eyal!
> > >> > >
> > >> > > I already had ovirt-master repo installed, but updated
everything
> > >> just in
> > >> > > case.
> > >> > > I even tried both yum and dnf (since yum on centos was
giving
me
> > lots
> > >> of
> > >> > > grief before and I learned their behaviour differs,
especially
> when
> > it
> > >> > > comes to bugs) but none works...
> > >> > >
> > >> > > >No package ansible-runner-service-dev available.
> > >> > > >No match for argument: ansible-runner-service-dev
> > >> > >
> > >> > > Fedor
> > >> > >
> > >> > >
> > >> > Looks like you're trying to install ovirt-master-snapshot on
el7.
> > >> > It won't work.
> > >> > Master is not supporting el7 anymore.
> > >> > You can use 4.3 snapshot rpm at :
> > >> >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> if
> > >> > you need to stay on el7.
> > >> >
> > >> >
> > >> > > ----- Original Message -----
> > >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com
>
> > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > >> > > Cc: "devel" < devel(a)ovirt.org >
> > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > >> > > Subject: Re: [ovirt-devel] what's up with
> ansible-runner-service-dev
> > >> > > package?
> > >> > >
> > >> > > Hi Fedor,
> > >> > >
> > >> > > Please try:
> > >> > > 1. dnf install
> > >> > >
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >> > > 2. dnf update
> > >> > > 3. dnf install ansible-runner-service-dev
> > >> > > 4. flow the instruction from thread 'New dependency for
> development
> > >> > > environment'
> > >> > > The
> > >> > >
> > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > >> wrote:
> > >> > >
> > >> > > > Hi everyone,
> > >> > > >
> > >> > > > After I screwed up my dev environment beyond repair I
have to
> set
> > >> it up
> > >> > > > again and I see something I haven't last time
(CentOS 7):
> > >> > > >
> > >> > > > $ sudo yum install ansible-runner-service-dev
> > >> > > > Loaded plugins: fastestmirror
> > >> > > > Loading mirror speeds from cached hostfile
> > >> > > > * base: mirror.hosting90.cz
> > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > >> > > > * extras: mirror.hosting90.cz
> > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > >> > > > * updates: mirror.hosting90.cz
> > >> > > > No package ansible-runner-service-dev available.
> > >> > > >
> > >> > > > Maybe something's missing from my notes, but where
did it go?
> > >> Should I
> > >> > > add
> > >> > > > some repo?
> > >> > > >
> > >> > > > Fedor
> > >> > > > _______________________________________________
> > >> > > > Devel mailing list -- devel(a)ovirt.org
> > >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > > oVirt Code of Conduct:
> > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > >> > > > List Archives:
> > >> > > >
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > >> > > >
> > >> > >
> > >> > >
> > >> > > --
> > >> > > Regards,
> > >> > > Eyal Shenitzky
> > >> > > _______________________________________________
> > >> > > Devel mailing list -- devel(a)ovirt.org
> > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > oVirt Code of Conduct:
> > >> > > https://www.ovirt.org/community/about/community-guidelines/
> > >> > > List Archives:
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >> > >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> > Sandro Bonazzola
> > >> >
> > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > >> >
> > >> > Red Hat EMEA < https://www.redhat.com/ >
> > >> >
> > >> > sbonazzo(a)redhat.com
> > >> > < https://www.redhat.com/ >*Red Hat respects your work
life
balance.
> > >> > Therefore there is no need to answer this email out of your
office
> > >> hours.
> > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > >> > _______________________________________________
> > >> > Devel mailing list -- devel(a)ovirt.org
> > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> > oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> > List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > >> _______________________________________________
> > >> Devel mailing list -- devel(a)ovirt.org
> > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > >>
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
3:03 p.m.
New subject: what's up with ansible-runner-service-dev package?
I just tried installing on Fedora 30 host and error stays the same, so it's probably
not as OS. Might try clean setup next, what else...
Liran, do you see anything of interest when you journalctl -u ansible-runner-service |
grep fatal ?
Fedor
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Tuesday, March 17, 2020 12:49:32 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
I tried installing python 2 versions of some dependencies in addition
to
python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
is not clear about it at all. on Fedora 30 default versions of these
libraries you get when not specifying python vesion in the name are python
2.)
Now error looks slightly different :'D
2020-03-17 11:08:27,294+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
error, please check Ansible runner error log..
Everything else stays the same, host install fails almost immediately.
Does someone have any notes for Fedora 30 install they can share?
I start seeing it too:
ansible-runner-service-dev-1.0.1-1.fc30.noarch
python3-ansible-runner-1.3.4-2.fc30.noarch
engine:
http://pastebin.test.redhat.com/845373
of course no ansible log..
This is what journalctl show:
http://pastebin.test.redhat.com/845375
After doing some debugging in the engine, after setting a breakpoint in
AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over
until the execution (lines 139-147) it does work. Without breaking point
and making things slower it throws the error.
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:52:47 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Sorry, my bad, it was just under my nose. Systemctl is not aware of
gunicorn-3, but when I check journalctl for ansible-runner-service I see
the following:
Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Starting gunicorn 19.9.0
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Listening at: http://127.0.0.1:50001 (2992)
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Using worker: sync
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995]
[INFO] Booting worker with pid: 2995
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997]
[INFO] Booting worker with pid: 2997
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Is that any suspicious? :)
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Monday, March 16, 2020 3:36:40 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
After you start ansible-runner-service service, you should see similar
logs in journalctl:
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Starting gunicorn 19.9.0
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Using worker: sync
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1496] [INFO] Booting worker with pid: 1496
And more if you execute some action from engine (like install new host or
upgrade a host)
So does that mean that something was supposed to register it as a service
but did not?
Fedor
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
> FC30 dev env engine indeed :) I've done this before on other OS, so
unless
> there is a blindspot somewhere in my eye it should be configured fine.
>
> [apple@apple ~]$ sudo systemctl status ansible-runner-service
> ● ansible-runner-service.service - Ansible Runner Service
> Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> enabled; vendor preset: disabled)
> Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> Main PID: 909 (gunicorn-3)
> Tasks: 9 (limit: 4915)
> Memory: 193.4M
> CGroup: /system.slice/ansible-runner-service.service
> ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> StrictHostKeyChecking=no -o Port=22 -o
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> -o KbdInteractiveAu>
>
> And the config:
>
> ---
> version: 1
>
> # playbooks_root_dir
> # location of the playbooks that the service will start
> playbooks_root_dir:
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> # port
> # tcp port for the service to listen to
> port: 50001
> #
> # ip_address
> # Specific IP address to bind to
> # ip_address: '0.0.0.0'
> target_user: root
> #event_cache_size: 3
> ssh_private_key:
> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
>
> /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> else to check now...
>
Anything strange in journalctl for gunicorn-3 service?
>
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 2:56:59 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > Actually, it was too early for me to celebrate.
> >
> > On Fedora 30, the engine compiles and runs fine, but when I try adding
> the
> > host installation fails almost immediately and I get the following
errors
> > in the engine logs:
> >
> > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
Failed
> to
> > execute Ansible host-deploy role: Internal server error, please check
> > Ansible runner error log.. Please check logs for more details:
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > There is nothing else. There is no file
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > Snapshot I'm using for the host is the same that worked just fine when
> > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
issue?
> >
>
> As you mentioned building engine I assume you are using engine in dev
env
> on FC30, right? If so, have you manually configured
ansible-runner-service
> for dev env as mentioned in
>
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> ?
>
>
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > To: "Martin Perina" < mperina(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 12:37:44 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Hi,
> >
> > Resolved through installing engine on Fedora 30. From what I
understand,
> > CentOS 7 is not supported anymore.
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
<
> > eshenitz(a)redhat.com >
> > Sent: Monday, March 16, 2020 8:11:35 AM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > Hi Fedor,
> >
> > ansible-runner-service-dev package is available from
> >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > repos which is included in ovirt-master-release package, which
> > includes all repositories necessary for oVirt development:
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >
> > Was your issue resolved or not?
> >
> > Regards,
> > Martin
> >
> >
> >
> >
> > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
>
> > wrote:
> >
> > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > >
> > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com >
> wrote:
> > >
> > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > >>
> > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
fgavrilo(a)redhat.com >
> > >> wrote:
> > >> >
> > >> > Hi Sandro,
> > >> >
> > >> > Thanks for the suggestion, but it seems to not help much.
> > >> >
> > >> > ansible-runner-service-dev still can't be found, I checked
repos
> that
> > >> are installed from
> > >>
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> and haven't found similarly names packages either...
> > >> >
> > >> > $ sudo yum install ansible-runner-service-dev
> > >> > Loaded plugins: fastestmirror
> > >> > Repository centos-sclo-rh-release is listed more than once in
the
> > >> configuration
> > >> > Repository sac-gluster-ansible is listed more than once in the
> > >> configuration
> > >> > Determining fastest mirrors
> > >> > ovirt-4.3-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > ovirt-master-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > * base: ftp.sh.cvut.cz
> > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > >> > * extras: ftp.sh.cvut.cz
> > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > >> > * ovirt-master-epel: mirror.karneval.cz
> > >> > * ovirt-master-snapshot: ftp.plusline.net
> > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > >> > * updates: ftp.sh.cvut.cz
> > >> > base
> > >>
> > >> | 3.6 kB 00:00:00
> > >> > centos-opstools-release
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > centos-ovirt-common-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-ovirt44-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-qemu-ev-release
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-sclo-rh
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-rh-release
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-sclo
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > epel-apache-maven
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > extras
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-opstools
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-ovirt43
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-qemu-ev
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-4.3-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-centos-opstools-testing
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-master-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirtwebui-ovirt-web-ui-master
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > sac-gluster-ansible
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > updates
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > (1/32): base/7/x86_64/group_gz
> > >>
> > >> | 165 kB 00:00:00
> > >> > (2/32): base/7/x86_64/primary_db
> > >>
> > >> | 6.0 MB 00:00:00
> > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:00
> > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > >>
> > >> | 9.3 kB 00:00:00
> > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > >>
> > >> | 344 kB 00:00:00
> > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > >>
> > >> | 1.1 kB 00:00:01
> > >> > (7/32): extras/7/x86_64/primary_db
> > >>
> > >> | 164 kB 00:00:00
> > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:01
> > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > >>
> > >> | 101 kB 00:00:01
> > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > >>
> > >> | 73 kB 00:00:00
> > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > >>
> > >> | 5.0 kB 00:00:01
> > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:00
> > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > >>
> > >> | 211 kB 00:00:00
> > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > >>
> > >> | 109 kB 00:00:00
> > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > >>
> > >> | 54 kB 00:00:00
> > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:01
> > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > >>
> > >> | 4.6 kB 00:00:00
> > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:00
> > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:03
> > >> > (29/32): updates/7/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> > >>
> > >> | 611 kB 00:00:01
> > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > >>
> > >> | 2.3 kB 00:00:00
> > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > >>
> > >> | 13 kB 00:00:00
> > >> > No package ansible-runner-service-dev available.
> > >> > Error: Nothing to do
> > >> >
> > >> >
> > >> > Fedor
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com >
> > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > >> ansible-runner-service-dev package?
> > >> >
> > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> > >> fgavrilo(a)redhat.com >
> > >> > ha scritto:
> > >> >
> > >> > > Thanks for the response, Eyal!
> > >> > >
> > >> > > I already had ovirt-master repo installed, but updated
everything
> > >> just in
> > >> > > case.
> > >> > > I even tried both yum and dnf (since yum on centos was
giving
me
> > lots
> > >> of
> > >> > > grief before and I learned their behaviour differs,
especially
> when
> > it
> > >> > > comes to bugs) but none works...
> > >> > >
> > >> > > >No package ansible-runner-service-dev available.
> > >> > > >No match for argument: ansible-runner-service-dev
> > >> > >
> > >> > > Fedor
> > >> > >
> > >> > >
> > >> > Looks like you're trying to install ovirt-master-snapshot on
el7.
> > >> > It won't work.
> > >> > Master is not supporting el7 anymore.
> > >> > You can use 4.3 snapshot rpm at :
> > >> >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> if
> > >> > you need to stay on el7.
> > >> >
> > >> >
> > >> > > ----- Original Message -----
> > >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com
>
> > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > >> > > Cc: "devel" < devel(a)ovirt.org >
> > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > >> > > Subject: Re: [ovirt-devel] what's up with
> ansible-runner-service-dev
> > >> > > package?
> > >> > >
> > >> > > Hi Fedor,
> > >> > >
> > >> > > Please try:
> > >> > > 1. dnf install
> > >> > >
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >> > > 2. dnf update
> > >> > > 3. dnf install ansible-runner-service-dev
> > >> > > 4. flow the instruction from thread 'New dependency for
> development
> > >> > > environment'
> > >> > > The
> > >> > >
> > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > >> wrote:
> > >> > >
> > >> > > > Hi everyone,
> > >> > > >
> > >> > > > After I screwed up my dev environment beyond repair I
have to
> set
> > >> it up
> > >> > > > again and I see something I haven't last time
(CentOS 7):
> > >> > > >
> > >> > > > $ sudo yum install ansible-runner-service-dev
> > >> > > > Loaded plugins: fastestmirror
> > >> > > > Loading mirror speeds from cached hostfile
> > >> > > > * base: mirror.hosting90.cz
> > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > >> > > > * extras: mirror.hosting90.cz
> > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > >> > > > * updates: mirror.hosting90.cz
> > >> > > > No package ansible-runner-service-dev available.
> > >> > > >
> > >> > > > Maybe something's missing from my notes, but where
did it go?
> > >> Should I
> > >> > > add
> > >> > > > some repo?
> > >> > > >
> > >> > > > Fedor
> > >> > > > _______________________________________________
> > >> > > > Devel mailing list -- devel(a)ovirt.org
> > >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > > oVirt Code of Conduct:
> > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > >> > > > List Archives:
> > >> > > >
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > >> > > >
> > >> > >
> > >> > >
> > >> > > --
> > >> > > Regards,
> > >> > > Eyal Shenitzky
> > >> > > _______________________________________________
> > >> > > Devel mailing list -- devel(a)ovirt.org
> > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > oVirt Code of Conduct:
> > >> > > https://www.ovirt.org/community/about/community-guidelines/
> > >> > > List Archives:
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >> > >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> > Sandro Bonazzola
> > >> >
> > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > >> >
> > >> > Red Hat EMEA < https://www.redhat.com/ >
> > >> >
> > >> > sbonazzo(a)redhat.com
> > >> > < https://www.redhat.com/ >*Red Hat respects your work
life
balance.
> > >> > Therefore there is no need to answer this email out of your
office
> > >> hours.
> > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > >> > _______________________________________________
> > >> > Devel mailing list -- devel(a)ovirt.org
> > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> > oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> > List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > >> _______________________________________________
> > >> Devel mailing list -- devel(a)ovirt.org
> > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > >>
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
3:13 p.m.
On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
I just tried installing on Fedora 30 host and error stays the same,
so
it's probably not as OS. Might try clean setup next, what else...
Liran, do you see anything of interest when you journalctl -u
ansible-runner-service | grep fatal ?
No, we do see a trackback on the command pointing out
to python3.7/site-packages/runner_service/services/jobs.py
But, because breakpoint that only makes things slower, I think it's
timing/locking issue somehow.
Fedor
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, "Dana Elfassy" <
delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Tuesday, March 17, 2020 12:49:32 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
> I tried installing python 2 versions of some dependencies in addition to
> python 3 (as
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> is not clear about it at all. on Fedora 30 default versions of these
> libraries you get when not specifying python vesion in the name are
python
> 2.)
> Now error looks slightly different :'D
>
> 2020-03-17 11:08:27,294+01 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
> error, please check Ansible runner error log..
>
> Everything else stays the same, host install fails almost immediately.
> Does someone have any notes for Fedora 30 install they can share?
>
I start seeing it too:
ansible-runner-service-dev-1.0.1-1.fc30.noarch
python3-ansible-runner-1.3.4-2.fc30.noarch
engine:
http://pastebin.test.redhat.com/845373
of course no ansible log..
This is what journalctl show:
http://pastebin.test.redhat.com/845375
After doing some debugging in the engine, after setting a breakpoint in
AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over
until the execution (lines 139-147) it does work. Without breaking point
and making things slower it throws the error.
>
> Thanks,
> Fedor
>
> ----- Original Message -----
> From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> To: "Martin Perina" <mperina(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Monday, March 16, 2020 3:52:47 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Sorry, my bad, it was just under my nose. Systemctl is not aware of
> gunicorn-3, but when I check journalctl for ansible-runner-service I see
> the following:
>
> Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> [INFO] Starting gunicorn 19.9.0
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> [INFO] Listening at: http://127.0.0.1:50001 (2992)
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> [INFO] Using worker: sync
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2995]
> [INFO] Booting worker with pid: 2995
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2997]
> [INFO] Booting worker with pid: 2997
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> options from /etc/ansible-runner-service/config.yaml
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
>
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
> environment variables
> Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> overridden
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> options from /etc/ansible-runner-service/config.yaml
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
>
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
> environment variables
> Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> overridden
>
> Is that any suspicious? :)
>
> ----- Original Message -----
> From: "Martin Perina" <mperina(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Monday, March 16, 2020 3:36:40 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
>
>
> On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
>
> Nothing since there is no such service (or similarly named).
> Package python3-gunicorn is installed though.
>
> After you start ansible-runner-service service, you should see similar
> logs in journalctl:
>
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Starting gunicorn 19.9.0
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Using worker: sync
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1496] [INFO] Booting worker with pid: 1496
> And more if you execute some action from engine (like install new host or
> upgrade a host)
>
>
>
> So does that mean that something was supposed to register it as a service
> but did not?
>
> Fedor
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:13:03 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > FC30 dev env engine indeed :) I've done this before on other OS, so
> unless
> > there is a blindspot somewhere in my eye it should be configured fine.
> >
> > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > ● ansible-runner-service.service - Ansible Runner Service
> > Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> > enabled; vendor preset: disabled)
> > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> > Main PID: 909 (gunicorn-3)
> > Tasks: 9 (limit: 4915)
> > Memory: 193.4M
> > CGroup: /system.slice/ansible-runner-service.service
> > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > --private-key
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > --private-key
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > StrictHostKeyChecking=no -o Port=22 -o
> >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>
> > -o KbdInteractiveAu>
> >
> > And the config:
> >
> > ---
> > version: 1
> >
> > # playbooks_root_dir
> > # location of the playbooks that the service will start
> > playbooks_root_dir:
> >
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>
> > # port
> > # tcp port for the service to listen to
> > port: 50001
> > #
> > # ip_address
> > # Specific IP address to bind to
> > # ip_address: '0.0.0.0'
> > target_user: root
> > #event_cache_size: 3
> > ssh_private_key:
> > '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> >
> > /home/apple/ovirt-engine is where engine is dev-installed. Not sure
what
> > else to check now...
> >
>
> Anything strange in journalctl for gunicorn-3 service?
>
> >
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 2:56:59 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> > wrote:
> >
> > > Actually, it was too early for me to celebrate.
> > >
> > > On Fedora 30, the engine compiles and runs fine, but when I try
adding
> > the
> > > host installation fails almost immediately and I get the following
> errors
> > > in the engine logs:
> > >
> > > ERROR
[org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> Failed
> > to
> > > execute Ansible host-deploy role: Internal server error, please check
> > > Ansible runner error log.. Please check logs for more details:
> > >
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > There is nothing else. There is no file
> > >
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > > Snapshot I'm using for the host is the same that worked just fine
when
> > > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
> issue?
> > >
> >
> > As you mentioned building engine I assume you are using engine in dev
> env
> > on FC30, right? If so, have you manually configured
> ansible-runner-service
> > for dev env as mentioned in
> >
> >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > ?
> >
> >
> > > Thanks,
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > To: "Martin Perina" < mperina(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Hi,
> > >
> > > Resolved through installing engine on Fedora 30. From what I
> understand,
> > > CentOS 7 is not supported anymore.
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
> <
> > > eshenitz(a)redhat.com >
> > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > >
> > > Hi Fedor,
> > >
> > > ansible-runner-service-dev package is available from
> > >
> > >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > repos which is included in ovirt-master-release package, which
> > > includes all repositories necessary for oVirt development:
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >
> > > Was your issue resolved or not?
> > >
> > > Regards,
> > > Martin
> > >
> > >
> > >
> > >
> > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
> >
> > > wrote:
> > >
> > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > >
> > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com
>
> > wrote:
> > > >
> > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > > >>
> > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com >
> > > >> wrote:
> > > >> >
> > > >> > Hi Sandro,
> > > >> >
> > > >> > Thanks for the suggestion, but it seems to not help much.
> > > >> >
> > > >> > ansible-runner-service-dev still can't be found, I
checked repos
> > that
> > > >> are installed from
> > > >>
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > >> and haven't found similarly names packages either...
> > > >> >
> > > >> > $ sudo yum install ansible-runner-service-dev
> > > >> > Loaded plugins: fastestmirror
> > > >> > Repository centos-sclo-rh-release is listed more than once
in
the
> > > >> configuration
> > > >> > Repository sac-gluster-ansible is listed more than once in
the
> > > >> configuration
> > > >> > Determining fastest mirrors
> > > >> > ovirt-4.3-epel/x86_64/metalink
> > > >>
> > > >> | 30 kB 00:00:00
> > > >> > ovirt-master-epel/x86_64/metalink
> > > >>
> > > >> | 30 kB 00:00:00
> > > >> > * base: ftp.sh.cvut.cz
> > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > >> > * extras: ftp.sh.cvut.cz
> > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > >> > * updates: ftp.sh.cvut.cz
> > > >> > base
> > > >>
> > > >> | 3.6 kB 00:00:00
> > > >> > centos-opstools-release
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > centos-ovirt-common-testing
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-ovirt44-testing
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-qemu-ev-release
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-sclo-rh
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > centos-sclo-rh-release
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > centos-sclo-sclo
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > epel-apache-maven
> > > >>
> > > >> | 3.3 kB 00:00:00
> > > >> > extras
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-gluster6
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-opstools
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-ovirt43
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-qemu-ev
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-epel
> > > >>
> > > >> | 5.3 kB 00:00:00
> > > >> > ovirt-4.3-snapshot
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-4.3-snapshot-static
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-4.3-virtio-win-latest
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-centos-gluster6
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-master-centos-opstools-testing
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-master-epel
> > > >>
> > > >> | 5.3 kB 00:00:00
> > > >> > ovirt-master-snapshot
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-snapshot-static
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-virtio-win-latest
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirtwebui-ovirt-web-ui-master
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > sac-gluster-ansible
> > > >>
> > > >> | 3.3 kB 00:00:00
> > > >> > updates
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > (1/32): base/7/x86_64/group_gz
> > > >>
> > > >> | 165 kB 00:00:00
> > > >> > (2/32): base/7/x86_64/primary_db
> > > >>
> > > >> | 6.0 MB 00:00:00
> > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > >>
> > > >> | 4.2 MB 00:00:00
> > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > >>
> > > >> | 9.3 kB 00:00:00
> > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > >>
> > > >> | 344 kB 00:00:00
> > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > >>
> > > >> | 1.1 kB 00:00:01
> > > >> > (7/32): extras/7/x86_64/primary_db
> > > >>
> > > >> | 164 kB 00:00:00
> > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > >>
> > > >> | 429 kB 00:00:01
> > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > > >>
> > > >> | 101 kB 00:00:01
> > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > >>
> > > >> | 116 kB 00:00:00
> > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > >>
> > > >> | 73 kB 00:00:00
> > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > >>
> > > >> | 90 kB 00:00:00
> > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > >>
> > > >> | 5.0 kB 00:00:01
> > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > >>
> > > >> | 1.0 MB 00:00:00
> > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > > >>
> > > >> | 429 kB 00:00:00
> > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > >>
> > > >> | 211 kB 00:00:00
> > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > >>
> > > >> | 109 kB 00:00:00
> > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > > >>
> > > >> | 116 kB 00:00:00
> > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > >>
> > > >> | 90 kB 00:00:00
> > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > >>
> > > >> | 1.0 MB 00:00:00
> > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > >>
> > > >> | 54 kB 00:00:00
> > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > >>
> > > >> | 7.6 kB 00:00:01
> > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > > >>
> > > >> | 4.6 kB 00:00:00
> > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > > >>
> > > >> | 7.6 kB 00:00:00
> > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > >>
> > > >> | 4.2 MB 00:00:03
> > > >> > (29/32): updates/7/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (30/32):
ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > >>
> > > >> | 611 kB 00:00:01
> > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > >>
> > > >> | 2.3 kB 00:00:00
> > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > >>
> > > >> | 13 kB 00:00:00
> > > >> > No package ansible-runner-service-dev available.
> > > >> > Error: Nothing to do
> > > >> >
> > > >> >
> > > >> > Fedor
> > > >> >
> > > >> > ----- Original Message -----
> > > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com
>
> > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com
>, "devel" <
> > devel(a)ovirt.org >
> > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > >> ansible-runner-service-dev package?
> > > >> >
> > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov
<
> > > >> fgavrilo(a)redhat.com >
> > > >> > ha scritto:
> > > >> >
> > > >> > > Thanks for the response, Eyal!
> > > >> > >
> > > >> > > I already had ovirt-master repo installed, but updated
> everything
> > > >> just in
> > > >> > > case.
> > > >> > > I even tried both yum and dnf (since yum on centos was
giving
> me
> > > lots
> > > >> of
> > > >> > > grief before and I learned their behaviour differs,
especially
> > when
> > > it
> > > >> > > comes to bugs) but none works...
> > > >> > >
> > > >> > > >No package ansible-runner-service-dev available.
> > > >> > > >No match for argument: ansible-runner-service-dev
> > > >> > >
> > > >> > > Fedor
> > > >> > >
> > > >> > >
> > > >> > Looks like you're trying to install
ovirt-master-snapshot on
el7.
> > > >> > It won't work.
> > > >> > Master is not supporting el7 anymore.
> > > >> > You can use 4.3 snapshot rpm at :
> > > >> >
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > >> if
> > > >> > you need to stay on el7.
> > > >> >
> > > >> >
> > > >> > > ----- Original Message -----
> > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > >> > > Cc: "devel" < devel(a)ovirt.org >
> > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > >> > > Subject: Re: [ovirt-devel] what's up with
> > ansible-runner-service-dev
> > > >> > > package?
> > > >> > >
> > > >> > > Hi Fedor,
> > > >> > >
> > > >> > > Please try:
> > > >> > > 1. dnf install
> > > >> > >
> http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > >> > > 2. dnf update
> > > >> > > 3. dnf install ansible-runner-service-dev
> > > >> > > 4. flow the instruction from thread 'New dependency
for
> > development
> > > >> > > environment'
> > > >> > > The
> > > >> > >
> > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > >
> > > >> wrote:
> > > >> > >
> > > >> > > > Hi everyone,
> > > >> > > >
> > > >> > > > After I screwed up my dev environment beyond
repair I have
to
> > set
> > > >> it up
> > > >> > > > again and I see something I haven't last time
(CentOS 7):
> > > >> > > >
> > > >> > > > $ sudo yum install ansible-runner-service-dev
> > > >> > > > Loaded plugins: fastestmirror
> > > >> > > > Loading mirror speeds from cached hostfile
> > > >> > > > * base: mirror.hosting90.cz
> > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > >> > > > * extras: mirror.hosting90.cz
> > > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > >> > > > * updates: mirror.hosting90.cz
> > > >> > > > No package ansible-runner-service-dev available.
> > > >> > > >
> > > >> > > > Maybe something's missing from my notes, but
where did it
go?
> > > >> Should I
> > > >> > > add
> > > >> > > > some repo?
> > > >> > > >
> > > >> > > > Fedor
> > > >> > > > _______________________________________________
> > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > > > oVirt Code of Conduct:
> > > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > >> > > > List Archives:
> > > >> > > >
> > > >> > >
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> > > --
> > > >> > > Regards,
> > > >> > > Eyal Shenitzky
> > > >> > > _______________________________________________
> > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > > oVirt Code of Conduct:
> > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > >> > > List Archives:
> > > >> > >
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > >> > >
> > > >> >
> > > >> >
> > > >> > --
> > > >> >
> > > >> > Sandro Bonazzola
> > > >> >
> > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > >> >
> > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > >> >
> > > >> > sbonazzo(a)redhat.com
> > > >> > < https://www.redhat.com/ >*Red Hat respects your work
life
> balance.
> > > >> > Therefore there is no need to answer this email out of your
> office
> > > >> hours.
> > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > > >> > _______________________________________________
> > > >> > Devel mailing list -- devel(a)ovirt.org
> > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > oVirt Code of Conduct:
> > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > >> > List Archives:
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > >> _______________________________________________
> > > >> Devel mailing list -- devel(a)ovirt.org
> > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > >> oVirt Code of Conduct:
> > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > >> List Archives:
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > >>
> > > >
> > > >
> > > > --
> > > > Regards,
> > > > Eyal Shenitzky
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > >
> > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > >
> > >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
>
1:27 p.m.
New subject: what's up with ansible-runner-service-dev package?
For the time being I'm doing super careful clean installation of both engine and host
in hopes of getting dev env working again... results are yet to be seen.
What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master rpm for Fedora 30.
Correct name for the package is python3-ovirt-engine-sdk4. And more examples like that
with random package renamings.
README definitely needs an update. If you ask me, I would rather provide users with a
single version (Fedora 30 only) of dev installation docs that works rather than with two
versions that don't. Are there any reasons to keep CentOS 7 info there that's
irrelevant now? I can rework the docs for FC30 eventually if no one minds.
Or, if plans are to move to CentOS 8, maybe another brave soul can do that.
Fedor
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Tuesday, March 17, 2020 1:13:48 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
I just tried installing on Fedora 30 host and error stays the same, so it's probably
not as OS. Might try clean setup next, what else...
Liran, do you see anything of interest when you journalctl -u ansible-runner-service |
grep fatal ?
No, we do see a trackback on the command pointing out to
python3.7/site-packages/runner_service/services/jobs.py
But, because breakpoint that only makes things slower, I think it's timing/locking
issue somehow.
Fedor
----- Original Message -----
From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy" <
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
Sent: Tuesday, March 17, 2020 12:49:32 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
I tried installing python 2 versions of some dependencies in addition
to
python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
is not clear about it at all. on Fedora 30 default versions of these
libraries you get when not specifying python vesion in the name are python
2.)
Now error looks slightly different :'D
2020-03-17 11:08:27,294+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
error, please check Ansible runner error log..
Everything else stays the same, host install fails almost immediately.
Does someone have any notes for Fedora 30 install they can share?
I start seeing it too:
ansible-runner-service-dev-1.0.1-1.fc30.noarch
python3-ansible-runner-1.3.4-2.fc30.noarch
engine:
http://pastebin.test.redhat.com/845373
of course no ansible log..
This is what journalctl show:
http://pastebin.test.redhat.com/845375
After doing some debugging in the engine, after setting a breakpoint in
AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over
until the execution (lines 139-147) it does work. Without breaking point
and making things slower it throws the error.
Thanks,
Fedor
----- Original Message -----
From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
To: "Martin Perina" < mperina(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:52:47 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Sorry, my bad, it was just under my nose. Systemctl is not aware of
gunicorn-3, but when I check journalctl for ansible-runner-service I see
the following:
Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Starting gunicorn 19.9.0
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Listening at: http://127.0.0.1:50001 (2992)
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
[INFO] Using worker: sync
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995]
[INFO] Booting worker with pid: 2995
Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997]
[INFO] Booting worker with pid: 2997
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
options from /etc/ansible-runner-service/config.yaml
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
environment variables
Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
overridden
Is that any suspicious? :)
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:36:40 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
Nothing since there is no such service (or similarly named).
Package python3-gunicorn is installed though.
After you start ansible-runner-service service, you should see similar
logs in journalctl:
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Starting gunicorn 19.9.0
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1386] [INFO] Using worker: sync
Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
[1496] [INFO] Booting worker with pid: 1496
And more if you execute some action from engine (like install new host or
upgrade a host)
So does that mean that something was supposed to register it as a service
but did not?
Fedor
----- Original Message -----
From: "Martin Perina" < mperina(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Monday, March 16, 2020 3:13:03 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
> FC30 dev env engine indeed :) I've done this before on other OS, so
unless
> there is a blindspot somewhere in my eye it should be configured fine.
>
> [apple@apple ~]$ sudo systemctl status ansible-runner-service
> ● ansible-runner-service.service - Ansible Runner Service
> Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> enabled; vendor preset: disabled)
> Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> Main PID: 909 (gunicorn-3)
> Tasks: 9 (limit: 4915)
> Memory: 193.4M
> CGroup: /system.slice/ansible-runner-service.service
> ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> -w 2 runner_service.wsgi:application
> ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> --private-key
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> StrictHostKeyChecking=no -o Port=22 -o
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> -o KbdInteractiveAu>
>
> And the config:
>
> ---
> version: 1
>
> # playbooks_root_dir
> # location of the playbooks that the service will start
> playbooks_root_dir:
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> # port
> # tcp port for the service to listen to
> port: 50001
> #
> # ip_address
> # Specific IP address to bind to
> # ip_address: '0.0.0.0'
> target_user: root
> #event_cache_size: 3
> ssh_private_key:
> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
>
> /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> else to check now...
>
Anything strange in journalctl for gunicorn-3 service?
>
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 2:56:59 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > Actually, it was too early for me to celebrate.
> >
> > On Fedora 30, the engine compiles and runs fine, but when I try adding
> the
> > host installation fails almost immediately and I get the following
errors
> > in the engine logs:
> >
> > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
Failed
> to
> > execute Ansible host-deploy role: Internal server error, please check
> > Ansible runner error log.. Please check logs for more details:
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > There is nothing else. There is no file
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > Snapshot I'm using for the host is the same that worked just fine when
> > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
issue?
> >
>
> As you mentioned building engine I assume you are using engine in dev
env
> on FC30, right? If so, have you manually configured
ansible-runner-service
> for dev env as mentioned in
>
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> ?
>
>
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > To: "Martin Perina" < mperina(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 12:37:44 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Hi,
> >
> > Resolved through installing engine on Fedora 30. From what I
understand,
> > CentOS 7 is not supported anymore.
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
<
> > eshenitz(a)redhat.com >
> > Sent: Monday, March 16, 2020 8:11:35 AM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > Hi Fedor,
> >
> > ansible-runner-service-dev package is available from
> >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > repos which is included in ovirt-master-release package, which
> > includes all repositories necessary for oVirt development:
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> >
> > Was your issue resolved or not?
> >
> > Regards,
> > Martin
> >
> >
> >
> >
> > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
>
> > wrote:
> >
> > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > >
> > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com >
> wrote:
> > >
> > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > >>
> > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
fgavrilo(a)redhat.com >
> > >> wrote:
> > >> >
> > >> > Hi Sandro,
> > >> >
> > >> > Thanks for the suggestion, but it seems to not help much.
> > >> >
> > >> > ansible-runner-service-dev still can't be found, I checked
repos
> that
> > >> are installed from
> > >>
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> and haven't found similarly names packages either...
> > >> >
> > >> > $ sudo yum install ansible-runner-service-dev
> > >> > Loaded plugins: fastestmirror
> > >> > Repository centos-sclo-rh-release is listed more than once in the
> > >> configuration
> > >> > Repository sac-gluster-ansible is listed more than once in the
> > >> configuration
> > >> > Determining fastest mirrors
> > >> > ovirt-4.3-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > ovirt-master-epel/x86_64/metalink
> > >>
> > >> | 30 kB 00:00:00
> > >> > * base: ftp.sh.cvut.cz
> > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > >> > * extras: ftp.sh.cvut.cz
> > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > >> > * ovirt-master-epel: mirror.karneval.cz
> > >> > * ovirt-master-snapshot: ftp.plusline.net
> > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > >> > * updates: ftp.sh.cvut.cz
> > >> > base
> > >>
> > >> | 3.6 kB 00:00:00
> > >> > centos-opstools-release
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > centos-ovirt-common-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-ovirt44-testing
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-qemu-ev-release
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > centos-sclo-rh
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-rh-release
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > centos-sclo-sclo
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > epel-apache-maven
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > extras
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-opstools
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-ovirt43
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-centos-qemu-ev
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-4.3-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-4.3-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-4.3-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-centos-gluster6
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-centos-opstools-testing
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > ovirt-master-epel
> > >>
> > >> | 5.3 kB 00:00:00
> > >> > ovirt-master-snapshot
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-snapshot-static
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirt-master-virtio-win-latest
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > ovirtwebui-ovirt-web-ui-master
> > >>
> > >> | 3.0 kB 00:00:00
> > >> > sac-gluster-ansible
> > >>
> > >> | 3.3 kB 00:00:00
> > >> > updates
> > >>
> > >> | 2.9 kB 00:00:00
> > >> > (1/32): base/7/x86_64/group_gz
> > >>
> > >> | 165 kB 00:00:00
> > >> > (2/32): base/7/x86_64/primary_db
> > >>
> > >> | 6.0 MB 00:00:00
> > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:00
> > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > >>
> > >> | 9.3 kB 00:00:00
> > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > >>
> > >> | 344 kB 00:00:00
> > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > >>
> > >> | 1.1 kB 00:00:01
> > >> > (7/32): extras/7/x86_64/primary_db
> > >>
> > >> | 164 kB 00:00:00
> > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:01
> > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > >>
> > >> | 101 kB 00:00:01
> > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > >>
> > >> | 73 kB 00:00:00
> > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > >>
> > >> | 5.0 kB 00:00:01
> > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > >>
> > >> | 429 kB 00:00:00
> > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > >>
> > >> | 211 kB 00:00:00
> > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > >>
> > >> | 3.4 kB 00:00:00
> > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > >>
> > >> | 109 kB 00:00:00
> > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > >>
> > >> | 116 kB 00:00:00
> > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > >>
> > >> | 90 kB 00:00:00
> > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > >>
> > >> | 1.0 MB 00:00:00
> > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > >>
> > >> | 54 kB 00:00:00
> > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:01
> > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > >>
> > >> | 4.6 kB 00:00:00
> > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > >>
> > >> | 7.6 kB 00:00:00
> > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > >>
> > >> | 4.2 MB 00:00:03
> > >> > (29/32): updates/7/x86_64/primary_db
> > >>
> > >> | 6.7 MB 00:00:00
> > >> > (30/32): ovirt-master-centos-opstools-testing/x86_64/primary_db
> > >>
> > >> | 611 kB 00:00:01
> > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > >>
> > >> | 2.3 kB 00:00:00
> > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > >>
> > >> | 13 kB 00:00:00
> > >> > No package ansible-runner-service-dev available.
> > >> > Error: Nothing to do
> > >> >
> > >> >
> > >> > Fedor
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com >
> > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > >> ansible-runner-service-dev package?
> > >> >
> > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> > >> fgavrilo(a)redhat.com >
> > >> > ha scritto:
> > >> >
> > >> > > Thanks for the response, Eyal!
> > >> > >
> > >> > > I already had ovirt-master repo installed, but updated
everything
> > >> just in
> > >> > > case.
> > >> > > I even tried both yum and dnf (since yum on centos was
giving
me
> > lots
> > >> of
> > >> > > grief before and I learned their behaviour differs,
especially
> when
> > it
> > >> > > comes to bugs) but none works...
> > >> > >
> > >> > > >No package ansible-runner-service-dev available.
> > >> > > >No match for argument: ansible-runner-service-dev
> > >> > >
> > >> > > Fedor
> > >> > >
> > >> > >
> > >> > Looks like you're trying to install ovirt-master-snapshot on
el7.
> > >> > It won't work.
> > >> > Master is not supporting el7 anymore.
> > >> > You can use 4.3 snapshot rpm at :
> > >> >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > >> if
> > >> > you need to stay on el7.
> > >> >
> > >> >
> > >> > > ----- Original Message -----
> > >> > > From: "Eyal Shenitzky" < eshenitz(a)redhat.com
>
> > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > >> > > Cc: "devel" < devel(a)ovirt.org >
> > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > >> > > Subject: Re: [ovirt-devel] what's up with
> ansible-runner-service-dev
> > >> > > package?
> > >> > >
> > >> > > Hi Fedor,
> > >> > >
> > >> > > Please try:
> > >> > > 1. dnf install
> > >> > >
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >> > > 2. dnf update
> > >> > > 3. dnf install ansible-runner-service-dev
> > >> > > 4. flow the instruction from thread 'New dependency for
> development
> > >> > > environment'
> > >> > > The
> > >> > >
> > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > >> wrote:
> > >> > >
> > >> > > > Hi everyone,
> > >> > > >
> > >> > > > After I screwed up my dev environment beyond repair I
have to
> set
> > >> it up
> > >> > > > again and I see something I haven't last time
(CentOS 7):
> > >> > > >
> > >> > > > $ sudo yum install ansible-runner-service-dev
> > >> > > > Loaded plugins: fastestmirror
> > >> > > > Loading mirror speeds from cached hostfile
> > >> > > > * base: mirror.hosting90.cz
> > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > >> > > > * extras: mirror.hosting90.cz
> > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > >> > > > * updates: mirror.hosting90.cz
> > >> > > > No package ansible-runner-service-dev available.
> > >> > > >
> > >> > > > Maybe something's missing from my notes, but where
did it go?
> > >> Should I
> > >> > > add
> > >> > > > some repo?
> > >> > > >
> > >> > > > Fedor
> > >> > > > _______________________________________________
> > >> > > > Devel mailing list -- devel(a)ovirt.org
> > >> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > >> > > > oVirt Code of Conduct:
> > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > >> > > > List Archives:
> > >> > > >
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > >> > > >
> > >> > >
> > >> > >
> > >> > > --
> > >> > > Regards,
> > >> > > Eyal Shenitzky
> > >> > > _______________________________________________
> > >> > > Devel mailing list -- devel(a)ovirt.org
> > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> > > oVirt Code of Conduct:
> > >> > > https://www.ovirt.org/community/about/community-guidelines/
> > >> > > List Archives:
> > >> > >
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > >> > >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> > Sandro Bonazzola
> > >> >
> > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > >> >
> > >> > Red Hat EMEA < https://www.redhat.com/ >
> > >> >
> > >> > sbonazzo(a)redhat.com
> > >> > < https://www.redhat.com/ >*Red Hat respects your work life
balance.
> > >> > Therefore there is no need to answer this email out of your
office
> > >> hours.
> > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > >> > _______________________________________________
> > >> > Devel mailing list -- devel(a)ovirt.org
> > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> > oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> > List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > >> _______________________________________________
> > >> Devel mailing list -- devel(a)ovirt.org
> > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > >> oVirt Code of Conduct:
> > >> https://www.ovirt.org/community/about/community-guidelines/
> > >> List Archives:
> > >>
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > >>
> > >
> > >
> > > --
> > > Regards,
> > > Eyal Shenitzky
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
1:45 p.m.
On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
For the time being I'm doing super careful clean installation of both engine and host
in hopes of getting dev env working again... results are yet to be seen.
What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master rpm for Fedora 30.
Correct name for the package is python3-ovirt-engine-sdk4. And more examples like that
with random package renamings.
README definitely needs an update. If you ask me, I would rather provide users with a
single version (Fedora 30 only) of dev installation docs that works rather than with two
versions that don't.
Please do the update.
Hopefully you will have more luck, my last README patch was abandoned after
it was neglected by engine maintainers.
https://gerrit.ovirt.org/c/106467/
Are there any reasons to keep CentOS 7 info there that's
irrelevant now?
It should be dropped now.
I can rework the docs for FC30 eventually if no one minds.
There is already a working fedora 30 instructions in the bottom of the
readme. It used to
work when Amit added it.
Or, if plans are to move to CentOS 8, maybe another brave soul can do
that.
Fedor
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Tuesday, March 17, 2020 1:13:48 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
I just tried installing on Fedora 30 host and error stays the same, so it's probably
not as OS. Might try clean setup next, what else...
Liran, do you see anything of interest when you journalctl -u ansible-runner-service |
grep fatal ?
No, we do see a trackback on the command pointing out to
python3.7/site-packages/runner_service/services/jobs.py
But, because breakpoint that only makes things slower, I think it's timing/locking
issue somehow.
Fedor
----- Original Message -----
From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy" <
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
Sent: Tuesday, March 17, 2020 12:49:32 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
> I tried installing python 2 versions of some dependencies in addition to
> python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> is not clear about it at all. on Fedora 30 default versions of these
> libraries you get when not specifying python vesion in the name are python
> 2.)
> Now error looks slightly different :'D
>
> 2020-03-17 11:08:27,294+01 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
> error, please check Ansible runner error log..
>
> Everything else stays the same, host install fails almost immediately.
> Does someone have any notes for Fedora 30 install they can share?
>
I start seeing it too:
ansible-runner-service-dev-1.0.1-1.fc30.noarch
python3-ansible-runner-1.3.4-2.fc30.noarch
engine:
http://pastebin.test.redhat.com/845373
of course no ansible log..
This is what journalctl show:
http://pastebin.test.redhat.com/845375
After doing some debugging in the engine, after setting a breakpoint in
AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over
until the execution (lines 139-147) it does work. Without breaking point
and making things slower it throws the error.
>
> Thanks,
> Fedor
>
> ----- Original Message -----
> From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> To: "Martin Perina" < mperina(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:52:47 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Sorry, my bad, it was just under my nose. Systemctl is not aware of
> gunicorn-3, but when I check journalctl for ansible-runner-service I see
> the following:
>
> Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Starting gunicorn 19.9.0
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Listening at: http://127.0.0.1:50001 (2992)
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Using worker: sync
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995]
> [INFO] Booting worker with pid: 2995
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997]
> [INFO] Booting worker with pid: 2997
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> options from /etc/ansible-runner-service/config.yaml
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
> environment variables
> Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> overridden
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> options from /etc/ansible-runner-service/config.yaml
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
> environment variables
> Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> overridden
>
> Is that any suspicious? :)
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:36:40 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
>
>
> On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
>
> Nothing since there is no such service (or similarly named).
> Package python3-gunicorn is installed though.
>
> After you start ansible-runner-service service, you should see similar
> logs in journalctl:
>
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Starting gunicorn 19.9.0
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Using worker: sync
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1496] [INFO] Booting worker with pid: 1496
> And more if you execute some action from engine (like install new host or
> upgrade a host)
>
>
>
> So does that mean that something was supposed to register it as a service
> but did not?
>
> Fedor
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:13:03 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > FC30 dev env engine indeed :) I've done this before on other OS, so
> unless
> > there is a blindspot somewhere in my eye it should be configured fine.
> >
> > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > ● ansible-runner-service.service - Ansible Runner Service
> > Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> > enabled; vendor preset: disabled)
> > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> > Main PID: 909 (gunicorn-3)
> > Tasks: 9 (limit: 4915)
> > Memory: 193.4M
> > CGroup: /system.slice/ansible-runner-service.service
> > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > --private-key
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > --private-key
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > StrictHostKeyChecking=no -o Port=22 -o
> >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>
> > -o KbdInteractiveAu>
> >
> > And the config:
> >
> > ---
> > version: 1
> >
> > # playbooks_root_dir
> > # location of the playbooks that the service will start
> > playbooks_root_dir:
> >
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>
> > # port
> > # tcp port for the service to listen to
> > port: 50001
> > #
> > # ip_address
> > # Specific IP address to bind to
> > # ip_address: '0.0.0.0'
> > target_user: root
> > #event_cache_size: 3
> > ssh_private_key:
> > '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> >
> > /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> > else to check now...
> >
>
> Anything strange in journalctl for gunicorn-3 service?
>
> >
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org >
> > Sent: Monday, March 16, 2020 2:56:59 PM
> > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> > wrote:
> >
> > > Actually, it was too early for me to celebrate.
> > >
> > > On Fedora 30, the engine compiles and runs fine, but when I try adding
> > the
> > > host installation fails almost immediately and I get the following
> errors
> > > in the engine logs:
> > >
> > > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> Failed
> > to
> > > execute Ansible host-deploy role: Internal server error, please check
> > > Ansible runner error log.. Please check logs for more details:
> > >
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > There is nothing else. There is no file
> > >
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > > Snapshot I'm using for the host is the same that worked just fine
when
> > > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
> issue?
> > >
> >
> > As you mentioned building engine I assume you are using engine in dev
> env
> > on FC30, right? If so, have you manually configured
> ansible-runner-service
> > for dev env as mentioned in
> >
> >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > ?
> >
> >
> > > Thanks,
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > To: "Martin Perina" < mperina(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Hi,
> > >
> > > Resolved through installing engine on Fedora 30. From what I
> understand,
> > > CentOS 7 is not supported anymore.
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
> <
> > > eshenitz(a)redhat.com >
> > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > >
> > > Hi Fedor,
> > >
> > > ansible-runner-service-dev package is available from
> > >
> > >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > repos which is included in ovirt-master-release package, which
> > > includes all repositories necessary for oVirt development:
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >
> > > Was your issue resolved or not?
> > >
> > > Regards,
> > > Martin
> > >
> > >
> > >
> > >
> > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
> >
> > > wrote:
> > >
> > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > >
> > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com
>
> > wrote:
> > > >
> > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > > >>
> > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com >
> > > >> wrote:
> > > >> >
> > > >> > Hi Sandro,
> > > >> >
> > > >> > Thanks for the suggestion, but it seems to not help much.
> > > >> >
> > > >> > ansible-runner-service-dev still can't be found, I
checked repos
> > that
> > > >> are installed from
> > > >>
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > >> and haven't found similarly names packages either...
> > > >> >
> > > >> > $ sudo yum install ansible-runner-service-dev
> > > >> > Loaded plugins: fastestmirror
> > > >> > Repository centos-sclo-rh-release is listed more than once
in the
> > > >> configuration
> > > >> > Repository sac-gluster-ansible is listed more than once in
the
> > > >> configuration
> > > >> > Determining fastest mirrors
> > > >> > ovirt-4.3-epel/x86_64/metalink
> > > >>
> > > >> | 30 kB 00:00:00
> > > >> > ovirt-master-epel/x86_64/metalink
> > > >>
> > > >> | 30 kB 00:00:00
> > > >> > * base: ftp.sh.cvut.cz
> > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > >> > * extras: ftp.sh.cvut.cz
> > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > >> > * updates: ftp.sh.cvut.cz
> > > >> > base
> > > >>
> > > >> | 3.6 kB 00:00:00
> > > >> > centos-opstools-release
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > centos-ovirt-common-testing
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-ovirt44-testing
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-qemu-ev-release
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-sclo-rh
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > centos-sclo-rh-release
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > centos-sclo-sclo
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > epel-apache-maven
> > > >>
> > > >> | 3.3 kB 00:00:00
> > > >> > extras
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-gluster6
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-opstools
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-ovirt43
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-qemu-ev
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-epel
> > > >>
> > > >> | 5.3 kB 00:00:00
> > > >> > ovirt-4.3-snapshot
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-4.3-snapshot-static
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-4.3-virtio-win-latest
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-centos-gluster6
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-master-centos-opstools-testing
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-master-epel
> > > >>
> > > >> | 5.3 kB 00:00:00
> > > >> > ovirt-master-snapshot
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-snapshot-static
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-virtio-win-latest
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirtwebui-ovirt-web-ui-master
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > sac-gluster-ansible
> > > >>
> > > >> | 3.3 kB 00:00:00
> > > >> > updates
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > (1/32): base/7/x86_64/group_gz
> > > >>
> > > >> | 165 kB 00:00:00
> > > >> > (2/32): base/7/x86_64/primary_db
> > > >>
> > > >> | 6.0 MB 00:00:00
> > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > >>
> > > >> | 4.2 MB 00:00:00
> > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > >>
> > > >> | 9.3 kB 00:00:00
> > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > >>
> > > >> | 344 kB 00:00:00
> > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > >>
> > > >> | 1.1 kB 00:00:01
> > > >> > (7/32): extras/7/x86_64/primary_db
> > > >>
> > > >> | 164 kB 00:00:00
> > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > >>
> > > >> | 429 kB 00:00:01
> > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > > >>
> > > >> | 101 kB 00:00:01
> > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > >>
> > > >> | 116 kB 00:00:00
> > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > >>
> > > >> | 73 kB 00:00:00
> > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > >>
> > > >> | 90 kB 00:00:00
> > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > >>
> > > >> | 5.0 kB 00:00:01
> > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > >>
> > > >> | 1.0 MB 00:00:00
> > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > > >>
> > > >> | 429 kB 00:00:00
> > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > >>
> > > >> | 211 kB 00:00:00
> > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > >>
> > > >> | 109 kB 00:00:00
> > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > > >>
> > > >> | 116 kB 00:00:00
> > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > >>
> > > >> | 90 kB 00:00:00
> > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > >>
> > > >> | 1.0 MB 00:00:00
> > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > >>
> > > >> | 54 kB 00:00:00
> > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > >>
> > > >> | 7.6 kB 00:00:01
> > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > > >>
> > > >> | 4.6 kB 00:00:00
> > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > > >>
> > > >> | 7.6 kB 00:00:00
> > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > >>
> > > >> | 4.2 MB 00:00:03
> > > >> > (29/32): updates/7/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (30/32):
ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > >>
> > > >> | 611 kB 00:00:01
> > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > >>
> > > >> | 2.3 kB 00:00:00
> > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > >>
> > > >> | 13 kB 00:00:00
> > > >> > No package ansible-runner-service-dev available.
> > > >> > Error: Nothing to do
> > > >> >
> > > >> >
> > > >> > Fedor
> > > >> >
> > > >> > ----- Original Message -----
> > > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com
>
> > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com
>, "devel" <
> > devel(a)ovirt.org >
> > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > >> ansible-runner-service-dev package?
> > > >> >
> > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov
<
> > > >> fgavrilo(a)redhat.com >
> > > >> > ha scritto:
> > > >> >
> > > >> > > Thanks for the response, Eyal!
> > > >> > >
> > > >> > > I already had ovirt-master repo installed, but updated
> everything
> > > >> just in
> > > >> > > case.
> > > >> > > I even tried both yum and dnf (since yum on centos was
giving
> me
> > > lots
> > > >> of
> > > >> > > grief before and I learned their behaviour differs,
especially
> > when
> > > it
> > > >> > > comes to bugs) but none works...
> > > >> > >
> > > >> > > >No package ansible-runner-service-dev available.
> > > >> > > >No match for argument: ansible-runner-service-dev
> > > >> > >
> > > >> > > Fedor
> > > >> > >
> > > >> > >
> > > >> > Looks like you're trying to install
ovirt-master-snapshot on el7.
> > > >> > It won't work.
> > > >> > Master is not supporting el7 anymore.
> > > >> > You can use 4.3 snapshot rpm at :
> > > >> >
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > >> if
> > > >> > you need to stay on el7.
> > > >> >
> > > >> >
> > > >> > > ----- Original Message -----
> > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > >> > > Cc: "devel" < devel(a)ovirt.org >
> > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > >> > > Subject: Re: [ovirt-devel] what's up with
> > ansible-runner-service-dev
> > > >> > > package?
> > > >> > >
> > > >> > > Hi Fedor,
> > > >> > >
> > > >> > > Please try:
> > > >> > > 1. dnf install
> > > >> > >
> http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > >> > > 2. dnf update
> > > >> > > 3. dnf install ansible-runner-service-dev
> > > >> > > 4. flow the instruction from thread 'New dependency
for
> > development
> > > >> > > environment'
> > > >> > > The
> > > >> > >
> > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > >
> > > >> wrote:
> > > >> > >
> > > >> > > > Hi everyone,
> > > >> > > >
> > > >> > > > After I screwed up my dev environment beyond
repair I have to
> > set
> > > >> it up
> > > >> > > > again and I see something I haven't last time
(CentOS 7):
> > > >> > > >
> > > >> > > > $ sudo yum install ansible-runner-service-dev
> > > >> > > > Loaded plugins: fastestmirror
> > > >> > > > Loading mirror speeds from cached hostfile
> > > >> > > > * base: mirror.hosting90.cz
> > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > >> > > > * extras: mirror.hosting90.cz
> > > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > >> > > > * updates: mirror.hosting90.cz
> > > >> > > > No package ansible-runner-service-dev available.
> > > >> > > >
> > > >> > > > Maybe something's missing from my notes, but
where did it go?
> > > >> Should I
> > > >> > > add
> > > >> > > > some repo?
> > > >> > > >
> > > >> > > > Fedor
> > > >> > > > _______________________________________________
> > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > > > oVirt Code of Conduct:
> > > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > >> > > > List Archives:
> > > >> > > >
> > > >> > >
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> > > --
> > > >> > > Regards,
> > > >> > > Eyal Shenitzky
> > > >> > > _______________________________________________
> > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > > oVirt Code of Conduct:
> > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > >> > > List Archives:
> > > >> > >
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > >> > >
> > > >> >
> > > >> >
> > > >> > --
> > > >> >
> > > >> > Sandro Bonazzola
> > > >> >
> > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > >> >
> > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > >> >
> > > >> > sbonazzo(a)redhat.com
> > > >> > < https://www.redhat.com/ >*Red Hat respects your work
life
> balance.
> > > >> > Therefore there is no need to answer this email out of your
> office
> > > >> hours.
> > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > > >> > _______________________________________________
> > > >> > Devel mailing list -- devel(a)ovirt.org
> > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > oVirt Code of Conduct:
> > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > >> > List Archives:
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > >> _______________________________________________
> > > >> Devel mailing list -- devel(a)ovirt.org
> > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > >> oVirt Code of Conduct:
> > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > >> List Archives:
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > >>
> > > >
> > > >
> > > > --
> > > > Regards,
> > > > Eyal Shenitzky
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > >
> > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > >
> > >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
>
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
4:07 p.m.
New subject: what's up with ansible-runner-service-dev package?
Ok, thanks for the reaction :)
Getting back to the main topic, can anyone (please) try to compile the engine master now?
That's what I get when I try to:
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
hosted_engine_vm_cluster_name_result.stdout is undefined
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
Task/Handler: Install collectd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
Task/Handler: Install collectd plugins on engine
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
Task/Handler: Install collectd plugins on hosts
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
Task/Handler: Install collectd write_syslog plugin
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
Task/Handler: Check if fluentd is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
changed_when: fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
when: fluentd_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
Task/Handler: Check if rsyslog is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
changed_when: rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
when: rsyslog_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
Task/Handler: Check if collectd is running
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
Task/Handler: Install fluentd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
Task/Handler: Install fluentd engine plugins
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
Task/Handler: Install fluentd host plugins
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
when: stat_result.stat.exists == True
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
Task/Handler: Get ovirt_engine_fqdn
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
Task/Handler: Get ovirt_engine_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
Task/Handler: Get ovirt_engine_db_user
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
Task/Handler: Get ovirt_engine_history_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
Task/Handler: Get ovirt_engine_history_db_user
make[1]: *** [Makefile:401: validations] Error 2
make[1]: Leaving directory '/home/apple/git/ovirt-engine'
make: *** [Makefile:584: all-dev] Error 2
An extensive lecture from ansible, but what is this even about?
...
----- Original Message -----
From: "Nir Soffer" <nsoffer(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 11:45:28 AM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
For the time being I'm doing super careful clean installation of both engine and host
in hopes of getting dev env working again... results are yet to be seen.
What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master rpm for Fedora 30.
Correct name for the package is python3-ovirt-engine-sdk4. And more examples like that
with random package renamings.
README definitely needs an update. If you ask me, I would rather provide users with a
single version (Fedora 30 only) of dev installation docs that works rather than with two
versions that don't.
Please do the update.
Hopefully you will have more luck, my last README patch was abandoned after
it was neglected by engine maintainers.
https://gerrit.ovirt.org/c/106467/
Are there any reasons to keep CentOS 7 info there that's
irrelevant now?
It should be dropped now.
I can rework the docs for FC30 eventually if no one minds.
There is already a working fedora 30 instructions in the bottom of the
readme. It used to
work when Amit added it.
Or, if plans are to move to CentOS 8, maybe another brave soul can do
that.
Fedor
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Tuesday, March 17, 2020 1:13:48 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
I just tried installing on Fedora 30 host and error stays the same, so it's probably
not as OS. Might try clean setup next, what else...
Liran, do you see anything of interest when you journalctl -u ansible-runner-service |
grep fatal ?
No, we do see a trackback on the command pointing out to
python3.7/site-packages/runner_service/services/jobs.py
But, because breakpoint that only makes things slower, I think it's timing/locking
issue somehow.
Fedor
----- Original Message -----
From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy" <
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
Sent: Tuesday, March 17, 2020 12:49:32 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
> I tried installing python 2 versions of some dependencies in addition to
> python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> is not clear about it at all. on Fedora 30 default versions of these
> libraries you get when not specifying python vesion in the name are python
> 2.)
> Now error looks slightly different :'D
>
> 2020-03-17 11:08:27,294+01 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
> error, please check Ansible runner error log..
>
> Everything else stays the same, host install fails almost immediately.
> Does someone have any notes for Fedora 30 install they can share?
>
I start seeing it too:
ansible-runner-service-dev-1.0.1-1.fc30.noarch
python3-ansible-runner-1.3.4-2.fc30.noarch
engine:
http://pastebin.test.redhat.com/845373
of course no ansible log..
This is what journalctl show:
http://pastebin.test.redhat.com/845375
After doing some debugging in the engine, after setting a breakpoint in
AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over
until the execution (lines 139-147) it does work. Without breaking point
and making things slower it throws the error.
>
> Thanks,
> Fedor
>
> ----- Original Message -----
> From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> To: "Martin Perina" < mperina(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:52:47 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Sorry, my bad, it was just under my nose. Systemctl is not aware of
> gunicorn-3, but when I check journalctl for ansible-runner-service I see
> the following:
>
> Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Starting gunicorn 19.9.0
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Listening at: http://127.0.0.1:50001 (2992)
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Using worker: sync
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995]
> [INFO] Booting worker with pid: 2995
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997]
> [INFO] Booting worker with pid: 2997
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> options from /etc/ansible-runner-service/config.yaml
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
> environment variables
> Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> overridden
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> options from /etc/ansible-runner-service/config.yaml
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
> environment variables
> Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> overridden
>
> Is that any suspicious? :)
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:36:40 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
>
>
> On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
>
> Nothing since there is no such service (or similarly named).
> Package python3-gunicorn is installed though.
>
> After you start ansible-runner-service service, you should see similar
> logs in journalctl:
>
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Starting gunicorn 19.9.0
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Using worker: sync
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1496] [INFO] Booting worker with pid: 1496
> And more if you execute some action from engine (like install new host or
> upgrade a host)
>
>
>
> So does that mean that something was supposed to register it as a service
> but did not?
>
> Fedor
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:13:03 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > FC30 dev env engine indeed :) I've done this before on other OS, so
> unless
> > there is a blindspot somewhere in my eye it should be configured fine.
> >
> > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > ● ansible-runner-service.service - Ansible Runner Service
> > Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> > enabled; vendor preset: disabled)
> > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> > Main PID: 909 (gunicorn-3)
> > Tasks: 9 (limit: 4915)
> > Memory: 193.4M
> > CGroup: /system.slice/ansible-runner-service.service
> > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > --private-key
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > --private-key
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > StrictHostKeyChecking=no -o Port=22 -o
> >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>
> > -o KbdInteractiveAu>
> >
> > And the config:
> >
> > ---
> > version: 1
> >
> > # playbooks_root_dir
> > # location of the playbooks that the service will start
> > playbooks_root_dir:
> >
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>
> > # port
> > # tcp port for the service to listen to
> > port: 50001
> > #
> > # ip_address
> > # Specific IP address to bind to
> > # ip_address: '0.0.0.0'
> > target_user: root
> > #event_cache_size: 3
> > ssh_private_key:
> > '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> >
> > /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> > else to check now...
> >
>
> Anything strange in journalctl for gunicorn-3 service?
>
> >
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org >
> > Sent: Monday, March 16, 2020 2:56:59 PM
> > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> > wrote:
> >
> > > Actually, it was too early for me to celebrate.
> > >
> > > On Fedora 30, the engine compiles and runs fine, but when I try adding
> > the
> > > host installation fails almost immediately and I get the following
> errors
> > > in the engine logs:
> > >
> > > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> Failed
> > to
> > > execute Ansible host-deploy role: Internal server error, please check
> > > Ansible runner error log.. Please check logs for more details:
> > >
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > There is nothing else. There is no file
> > >
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > > Snapshot I'm using for the host is the same that worked just fine
when
> > > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
> issue?
> > >
> >
> > As you mentioned building engine I assume you are using engine in dev
> env
> > on FC30, right? If so, have you manually configured
> ansible-runner-service
> > for dev env as mentioned in
> >
> >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > ?
> >
> >
> > > Thanks,
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > To: "Martin Perina" < mperina(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Hi,
> > >
> > > Resolved through installing engine on Fedora 30. From what I
> understand,
> > > CentOS 7 is not supported anymore.
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
> <
> > > eshenitz(a)redhat.com >
> > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > >
> > > Hi Fedor,
> > >
> > > ansible-runner-service-dev package is available from
> > >
> > >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > repos which is included in ovirt-master-release package, which
> > > includes all repositories necessary for oVirt development:
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >
> > > Was your issue resolved or not?
> > >
> > > Regards,
> > > Martin
> > >
> > >
> > >
> > >
> > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
> >
> > > wrote:
> > >
> > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > >
> > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com
>
> > wrote:
> > > >
> > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > > >>
> > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com >
> > > >> wrote:
> > > >> >
> > > >> > Hi Sandro,
> > > >> >
> > > >> > Thanks for the suggestion, but it seems to not help much.
> > > >> >
> > > >> > ansible-runner-service-dev still can't be found, I
checked repos
> > that
> > > >> are installed from
> > > >>
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > >> and haven't found similarly names packages either...
> > > >> >
> > > >> > $ sudo yum install ansible-runner-service-dev
> > > >> > Loaded plugins: fastestmirror
> > > >> > Repository centos-sclo-rh-release is listed more than once
in the
> > > >> configuration
> > > >> > Repository sac-gluster-ansible is listed more than once in
the
> > > >> configuration
> > > >> > Determining fastest mirrors
> > > >> > ovirt-4.3-epel/x86_64/metalink
> > > >>
> > > >> | 30 kB 00:00:00
> > > >> > ovirt-master-epel/x86_64/metalink
> > > >>
> > > >> | 30 kB 00:00:00
> > > >> > * base: ftp.sh.cvut.cz
> > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > >> > * extras: ftp.sh.cvut.cz
> > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > >> > * updates: ftp.sh.cvut.cz
> > > >> > base
> > > >>
> > > >> | 3.6 kB 00:00:00
> > > >> > centos-opstools-release
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > centos-ovirt-common-testing
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-ovirt44-testing
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-qemu-ev-release
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-sclo-rh
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > centos-sclo-rh-release
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > centos-sclo-sclo
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > epel-apache-maven
> > > >>
> > > >> | 3.3 kB 00:00:00
> > > >> > extras
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-gluster6
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-opstools
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-ovirt43
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-qemu-ev
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-epel
> > > >>
> > > >> | 5.3 kB 00:00:00
> > > >> > ovirt-4.3-snapshot
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-4.3-snapshot-static
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-4.3-virtio-win-latest
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-centos-gluster6
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-master-centos-opstools-testing
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-master-epel
> > > >>
> > > >> | 5.3 kB 00:00:00
> > > >> > ovirt-master-snapshot
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-snapshot-static
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-virtio-win-latest
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirtwebui-ovirt-web-ui-master
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > sac-gluster-ansible
> > > >>
> > > >> | 3.3 kB 00:00:00
> > > >> > updates
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > (1/32): base/7/x86_64/group_gz
> > > >>
> > > >> | 165 kB 00:00:00
> > > >> > (2/32): base/7/x86_64/primary_db
> > > >>
> > > >> | 6.0 MB 00:00:00
> > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > >>
> > > >> | 4.2 MB 00:00:00
> > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > >>
> > > >> | 9.3 kB 00:00:00
> > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > >>
> > > >> | 344 kB 00:00:00
> > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > >>
> > > >> | 1.1 kB 00:00:01
> > > >> > (7/32): extras/7/x86_64/primary_db
> > > >>
> > > >> | 164 kB 00:00:00
> > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > >>
> > > >> | 429 kB 00:00:01
> > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > > >>
> > > >> | 101 kB 00:00:01
> > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > >>
> > > >> | 116 kB 00:00:00
> > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > >>
> > > >> | 73 kB 00:00:00
> > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > >>
> > > >> | 90 kB 00:00:00
> > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > >>
> > > >> | 5.0 kB 00:00:01
> > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > >>
> > > >> | 1.0 MB 00:00:00
> > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > > >>
> > > >> | 429 kB 00:00:00
> > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > >>
> > > >> | 211 kB 00:00:00
> > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > >>
> > > >> | 109 kB 00:00:00
> > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > > >>
> > > >> | 116 kB 00:00:00
> > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > >>
> > > >> | 90 kB 00:00:00
> > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > >>
> > > >> | 1.0 MB 00:00:00
> > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > >>
> > > >> | 54 kB 00:00:00
> > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > >>
> > > >> | 7.6 kB 00:00:01
> > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > > >>
> > > >> | 4.6 kB 00:00:00
> > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > > >>
> > > >> | 7.6 kB 00:00:00
> > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > >>
> > > >> | 4.2 MB 00:00:03
> > > >> > (29/32): updates/7/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (30/32):
ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > >>
> > > >> | 611 kB 00:00:01
> > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > >>
> > > >> | 2.3 kB 00:00:00
> > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > >>
> > > >> | 13 kB 00:00:00
> > > >> > No package ansible-runner-service-dev available.
> > > >> > Error: Nothing to do
> > > >> >
> > > >> >
> > > >> > Fedor
> > > >> >
> > > >> > ----- Original Message -----
> > > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com
>
> > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com
>, "devel" <
> > devel(a)ovirt.org >
> > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > >> ansible-runner-service-dev package?
> > > >> >
> > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov
<
> > > >> fgavrilo(a)redhat.com >
> > > >> > ha scritto:
> > > >> >
> > > >> > > Thanks for the response, Eyal!
> > > >> > >
> > > >> > > I already had ovirt-master repo installed, but updated
> everything
> > > >> just in
> > > >> > > case.
> > > >> > > I even tried both yum and dnf (since yum on centos was
giving
> me
> > > lots
> > > >> of
> > > >> > > grief before and I learned their behaviour differs,
especially
> > when
> > > it
> > > >> > > comes to bugs) but none works...
> > > >> > >
> > > >> > > >No package ansible-runner-service-dev available.
> > > >> > > >No match for argument: ansible-runner-service-dev
> > > >> > >
> > > >> > > Fedor
> > > >> > >
> > > >> > >
> > > >> > Looks like you're trying to install
ovirt-master-snapshot on el7.
> > > >> > It won't work.
> > > >> > Master is not supporting el7 anymore.
> > > >> > You can use 4.3 snapshot rpm at :
> > > >> >
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > >> if
> > > >> > you need to stay on el7.
> > > >> >
> > > >> >
> > > >> > > ----- Original Message -----
> > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > >> > > Cc: "devel" < devel(a)ovirt.org >
> > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > >> > > Subject: Re: [ovirt-devel] what's up with
> > ansible-runner-service-dev
> > > >> > > package?
> > > >> > >
> > > >> > > Hi Fedor,
> > > >> > >
> > > >> > > Please try:
> > > >> > > 1. dnf install
> > > >> > >
> http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > >> > > 2. dnf update
> > > >> > > 3. dnf install ansible-runner-service-dev
> > > >> > > 4. flow the instruction from thread 'New dependency
for
> > development
> > > >> > > environment'
> > > >> > > The
> > > >> > >
> > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > >
> > > >> wrote:
> > > >> > >
> > > >> > > > Hi everyone,
> > > >> > > >
> > > >> > > > After I screwed up my dev environment beyond
repair I have to
> > set
> > > >> it up
> > > >> > > > again and I see something I haven't last time
(CentOS 7):
> > > >> > > >
> > > >> > > > $ sudo yum install ansible-runner-service-dev
> > > >> > > > Loaded plugins: fastestmirror
> > > >> > > > Loading mirror speeds from cached hostfile
> > > >> > > > * base: mirror.hosting90.cz
> > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > >> > > > * extras: mirror.hosting90.cz
> > > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > >> > > > * updates: mirror.hosting90.cz
> > > >> > > > No package ansible-runner-service-dev available.
> > > >> > > >
> > > >> > > > Maybe something's missing from my notes, but
where did it go?
> > > >> Should I
> > > >> > > add
> > > >> > > > some repo?
> > > >> > > >
> > > >> > > > Fedor
> > > >> > > > _______________________________________________
> > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > > > oVirt Code of Conduct:
> > > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > >> > > > List Archives:
> > > >> > > >
> > > >> > >
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> > > --
> > > >> > > Regards,
> > > >> > > Eyal Shenitzky
> > > >> > > _______________________________________________
> > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > > oVirt Code of Conduct:
> > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > >> > > List Archives:
> > > >> > >
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > >> > >
> > > >> >
> > > >> >
> > > >> > --
> > > >> >
> > > >> > Sandro Bonazzola
> > > >> >
> > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > >> >
> > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > >> >
> > > >> > sbonazzo(a)redhat.com
> > > >> > < https://www.redhat.com/ >*Red Hat respects your work
life
> balance.
> > > >> > Therefore there is no need to answer this email out of your
> office
> > > >> hours.
> > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > > >> > _______________________________________________
> > > >> > Devel mailing list -- devel(a)ovirt.org
> > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > oVirt Code of Conduct:
> > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > >> > List Archives:
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > >> _______________________________________________
> > > >> Devel mailing list -- devel(a)ovirt.org
> > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > >> oVirt Code of Conduct:
> > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > >> List Archives:
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > >>
> > > >
> > > >
> > > > --
> > > > Regards,
> > > > Eyal Shenitzky
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > >
> > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > >
> > >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
>
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
4:21 p.m.
On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Ok, thanks for the reaction :)
Getting back to the main topic, can anyone (please) try to compile the
engine master now?
That's what I get when I try to:
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
hosted_engine_vm_cluster_name_result.stdout is undefined
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
Task/Handler: Install collectd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
Task/Handler: Install collectd plugins on engine
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
Task/Handler: Install collectd plugins on hosts
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
Task/Handler: Install collectd write_syslog plugin
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
Task/Handler: Check if fluentd is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
changed_when: fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
when: fluentd_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
Task/Handler: Check if rsyslog is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
changed_when: rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
when: rsyslog_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
Task/Handler: Check if collectd is running
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
Task/Handler: Install fluentd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
Task/Handler: Install fluentd engine plugins
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
Task/Handler: Install fluentd host plugins
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
when: stat_result.stat.exists == True
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
Task/Handler: Get ovirt_engine_fqdn
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
Task/Handler: Get ovirt_engine_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
Task/Handler: Get ovirt_engine_db_user
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
Task/Handler: Get ovirt_engine_history_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
Task/Handler: Get ovirt_engine_history_db_user
make[1]: *** [Makefile:401: validations] Error 2
make[1]: Leaving directory '/home/apple/git/ovirt-engine'
make: *** [Makefile:584: all-dev] Error 2
An extensive lecture from ansible, but what is this even about?
https://bugzilla.redhat.com/show_bug.cgi?id=1804268
...
----- Original Message -----
From: "Nir Soffer" <nsoffer(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<
delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 11:45:28 AM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
>
> For the time being I'm doing super careful clean installation of both
engine and host in hopes of getting dev env working again... results are
yet to be seen.
> What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master
rpm for Fedora 30. Correct name for the package is
python3-ovirt-engine-sdk4. And more examples like that with random package
renamings.
>
> README definitely needs an update. If you ask me, I would rather provide
users with a single version (Fedora 30 only) of dev installation docs that
works rather than with two versions that don't.
Please do the update.
Hopefully you will have more luck, my last README patch was abandoned after
it was neglected by engine maintainers.
https://gerrit.ovirt.org/c/106467/
> Are there any reasons to keep CentOS 7 info there that's irrelevant now?
It should be dropped now.
> I can rework the docs for FC30 eventually if no one minds.
There is already a working fedora 30 instructions in the bottom of the
readme. It used to
work when Amit added it.
> Or, if plans are to move to CentOS 8, maybe another brave soul can do
that.
> Fedor
>
> ----- Original Message -----
> From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Tuesday, March 17, 2020 1:13:48 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
>
>
> On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
>
>
> I just tried installing on Fedora 30 host and error stays the same, so
it's probably not as OS. Might try clean setup next, what else...
>
> Liran, do you see anything of interest when you journalctl -u
ansible-runner-service | grep fatal ?
> No, we do see a trackback on the command pointing out to
python3.7/site-packages/runner_service/services/jobs.py
> But, because breakpoint that only makes things slower, I think it's
timing/locking issue somehow.
>
>
>
> Fedor
>
> ----- Original Message -----
> From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy"
<
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> Sent: Tuesday, March 17, 2020 12:49:32 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
> On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
>
> > I tried installing python 2 versions of some dependencies in addition
to
> > python 3 (as
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > is not clear about it at all. on Fedora 30 default versions of these
> > libraries you get when not specifying python vesion in the name are
python
> > 2.)
> > Now error looks slightly different :'D
> >
> > 2020-03-17 11:08:27,294+01 ERROR
> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
server
> > error, please check Ansible runner error log..
> >
> > Everything else stays the same, host install fails almost immediately.
> > Does someone have any notes for Fedora 30 install they can share?
> >
> I start seeing it too:
> ansible-runner-service-dev-1.0.1-1.fc30.noarch
> python3-ansible-runner-1.3.4-2.fc30.noarch
> engine:
> http://pastebin.test.redhat.com/845373
> of course no ansible log..
> This is what journalctl show:
> http://pastebin.test.redhat.com/845375
>
> After doing some debugging in the engine, after setting a breakpoint in
> AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over
> until the execution (lines 139-147) it does work. Without breaking point
> and making things slower it throws the error.
>
> >
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > To: "Martin Perina" < mperina(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:52:47 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > gunicorn-3, but when I check journalctl for ansible-runner-service I
see
> > the following:
> >
> > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Starting gunicorn 19.9.0
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Using worker: sync
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2995]
> > [INFO] Booting worker with pid: 2995
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2997]
> > [INFO] Booting worker with pid: 2997
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > options from /etc/ansible-runner-service/config.yaml
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
from
> > environment variables
> > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > overridden
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > options from /etc/ansible-runner-service/config.yaml
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
from
> > environment variables
> > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > overridden
> >
> > Is that any suspicious? :)
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:36:40 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> >
> >
> > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> > wrote:
> >
> >
> > Nothing since there is no such service (or similarly named).
> > Package python3-gunicorn is installed though.
> >
> > After you start ansible-runner-service service, you should see similar
> > logs in journalctl:
> >
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Starting gunicorn 19.9.0
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Using worker: sync
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1496] [INFO] Booting worker with pid: 1496
> > And more if you execute some action from engine (like install new host
or
> > upgrade a host)
> >
> >
> >
> > So does that mean that something was supposed to register it as a
service
> > but did not?
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:13:03 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> > wrote:
> >
> > > FC30 dev env engine indeed :) I've done this before on other OS, so
> > unless
> > > there is a blindspot somewhere in my eye it should be configured
fine.
> > >
> > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > ● ansible-runner-service.service - Ansible Runner Service
> > > Loaded: loaded
(/usr/lib/systemd/system/ansible-runner-service.service;
> > > enabled; vendor preset: disabled)
> > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> > > Main PID: 909 (gunicorn-3)
> > > Tasks: 9 (limit: 4915)
> > > Memory: 193.4M
> > > CGroup: /system.slice/ansible-runner-service.service
> > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > --private-key
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > --private-key
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > StrictHostKeyChecking=no -o Port=22 -o
> > >
> >
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> >
> > > -o KbdInteractiveAu>
> > >
> > > And the config:
> > >
> > > ---
> > > version: 1
> > >
> > > # playbooks_root_dir
> > > # location of the playbooks that the service will start
> > > playbooks_root_dir:
> > >
> >
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> >
> > > # port
> > > # tcp port for the service to listen to
> > > port: 50001
> > > #
> > > # ip_address
> > > # Specific IP address to bind to
> > > # ip_address: '0.0.0.0'
> > > target_user: root
> > > #event_cache_size: 3
> > > ssh_private_key:
> > >
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > >
> > > /home/apple/ovirt-engine is where engine is dev-installed. Not sure
what
> > > else to check now...
> > >
> >
> > Anything strange in journalctl for gunicorn-3 service?
> >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org >
> > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > package?
> > >
> > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > > wrote:
> > >
> > > > Actually, it was too early for me to celebrate.
> > > >
> > > > On Fedora 30, the engine compiles and runs fine, but when I try
adding
> > > the
> > > > host installation fails almost immediately and I get the following
> > errors
> > > > in the engine logs:
> > > >
> > > > ERROR
[org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
installation
> > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> > Failed
> > > to
> > > > execute Ansible host-deploy role: Internal server error, please
check
> > > > Ansible runner error log.. Please check logs for more details:
> > > >
> > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > There is nothing else. There is no file
> > > >
> > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > > Snapshot I'm using for the host is the same that worked just
fine
when
> > > > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
> > issue?
> > > >
> > >
> > > As you mentioned building engine I assume you are using engine in dev
> > env
> > > on FC30, right? If so, have you manually configured
> > ansible-runner-service
> > > for dev env as mentioned in
> > >
> > >
> >
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > ?
> > >
> > >
> > > > Thanks,
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > > package?
> > > >
> > > > Hi,
> > > >
> > > > Resolved through installing engine on Fedora 30. From what I
> > understand,
> > > > CentOS 7 is not supported anymore.
> > > >
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >,
"Dana Elfassy" <
> > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org
>, "Eyal
Shenitzky"
> > <
> > > > eshenitz(a)redhat.com >
> > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > package?
> > > >
> > > > Hi Fedor,
> > > >
> > > > ansible-runner-service-dev package is available from
> > > >
> > > >
> > >
> >
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > repos which is included in ovirt-master-release package, which
> > > > includes all repositories necessary for oVirt development:
> > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > >
> > > > Was your issue resolved or not?
> > > >
> > > > Regards,
> > > > Martin
> > > >
> > > >
> > > >
> > > >
> > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
eshenitz(a)redhat.com
> > >
> > > > wrote:
> > > >
> > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > > >
> > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
bzlotnik(a)redhat.com >
> > > wrote:
> > > > >
> > > > >> ansible-runner was added in 4.4, you shouldn't need in
4.3
> > > > >>
> > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> > fgavrilo(a)redhat.com >
> > > > >> wrote:
> > > > >> >
> > > > >> > Hi Sandro,
> > > > >> >
> > > > >> > Thanks for the suggestion, but it seems to not help
much.
> > > > >> >
> > > > >> > ansible-runner-service-dev still can't be found, I
checked
repos
> > > that
> > > > >> are installed from
> > > > >>
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > >> and haven't found similarly names packages either...
> > > > >> >
> > > > >> > $ sudo yum install ansible-runner-service-dev
> > > > >> > Loaded plugins: fastestmirror
> > > > >> > Repository centos-sclo-rh-release is listed more than
once in
the
> > > > >> configuration
> > > > >> > Repository sac-gluster-ansible is listed more than once
in the
> > > > >> configuration
> > > > >> > Determining fastest mirrors
> > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > >>
> > > > >> | 30 kB 00:00:00
> > > > >> > ovirt-master-epel/x86_64/metalink
> > > > >>
> > > > >> | 30 kB 00:00:00
> > > > >> > * base: ftp.sh.cvut.cz
> > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > >> > * extras: ftp.sh.cvut.cz
> > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > > >> > * updates: ftp.sh.cvut.cz
> > > > >> > base
> > > > >>
> > > > >> | 3.6 kB 00:00:00
> > > > >> > centos-opstools-release
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > centos-ovirt-common-testing
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-ovirt44-testing
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-qemu-ev-release
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-sclo-rh
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > centos-sclo-rh-release
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > centos-sclo-sclo
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > epel-apache-maven
> > > > >>
> > > > >> | 3.3 kB 00:00:00
> > > > >> > extras
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-gluster6
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-opstools
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-ovirt43
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-qemu-ev
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-epel
> > > > >>
> > > > >> | 5.3 kB 00:00:00
> > > > >> > ovirt-4.3-snapshot
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-4.3-snapshot-static
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-4.3-virtio-win-latest
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-centos-gluster6
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-master-centos-opstools-testing
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-master-epel
> > > > >>
> > > > >> | 5.3 kB 00:00:00
> > > > >> > ovirt-master-snapshot
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-snapshot-static
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-virtio-win-latest
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > sac-gluster-ansible
> > > > >>
> > > > >> | 3.3 kB 00:00:00
> > > > >> > updates
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > (1/32): base/7/x86_64/group_gz
> > > > >>
> > > > >> | 165 kB 00:00:00
> > > > >> > (2/32): base/7/x86_64/primary_db
> > > > >>
> > > > >> | 6.0 MB 00:00:00
> > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > >>
> > > > >> | 4.2 MB 00:00:00
> > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > > >>
> > > > >> | 9.3 kB 00:00:00
> > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > >>
> > > > >> | 344 kB 00:00:00
> > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > > >>
> > > > >> | 1.1 kB 00:00:01
> > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > >>
> > > > >> | 164 kB 00:00:00
> > > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > > >>
> > > > >> | 429 kB 00:00:01
> > > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > > > >>
> > > > >> | 101 kB 00:00:01
> > > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > >>
> > > > >> | 116 kB 00:00:00
> > > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > >>
> > > > >> | 73 kB 00:00:00
> > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > >>
> > > > >> | 90 kB 00:00:00
> > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > >>
> > > > >> | 5.0 kB 00:00:01
> > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > >>
> > > > >> | 1.0 MB 00:00:00
> > > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > >>
> > > > >> | 429 kB 00:00:00
> > > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > >>
> > > > >> | 211 kB 00:00:00
> > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > >>
> > > > >> | 109 kB 00:00:00
> > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > >>
> > > > >> | 116 kB 00:00:00
> > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > >>
> > > > >> | 90 kB 00:00:00
> > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > >>
> > > > >> | 1.0 MB 00:00:00
> > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > >>
> > > > >> | 54 kB 00:00:00
> > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > > >>
> > > > >> | 7.6 kB 00:00:01
> > > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > > > >>
> > > > >> | 4.6 kB 00:00:00
> > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > > > >>
> > > > >> | 7.6 kB 00:00:00
> > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > > >>
> > > > >> | 4.2 MB 00:00:03
> > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (30/32):
ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > >>
> > > > >> | 611 kB 00:00:01
> > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > >>
> > > > >> | 2.3 kB 00:00:00
> > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > > >>
> > > > >> | 13 kB 00:00:00
> > > > >> > No package ansible-runner-service-dev available.
> > > > >> > Error: Nothing to do
> > > > >> >
> > > > >> >
> > > > >> > Fedor
> > > > >> >
> > > > >> > ----- Original Message -----
> > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com
>, "devel" <
> > > devel(a)ovirt.org >
> > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > > >> ansible-runner-service-dev package?
> > > > >> >
> > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov
<
> > > > >> fgavrilo(a)redhat.com >
> > > > >> > ha scritto:
> > > > >> >
> > > > >> > > Thanks for the response, Eyal!
> > > > >> > >
> > > > >> > > I already had ovirt-master repo installed, but
updated
> > everything
> > > > >> just in
> > > > >> > > case.
> > > > >> > > I even tried both yum and dnf (since yum on centos
was
giving
> > me
> > > > lots
> > > > >> of
> > > > >> > > grief before and I learned their behaviour
differs,
especially
> > > when
> > > > it
> > > > >> > > comes to bugs) but none works...
> > > > >> > >
> > > > >> > > >No package ansible-runner-service-dev
available.
> > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > >> > >
> > > > >> > > Fedor
> > > > >> > >
> > > > >> > >
> > > > >> > Looks like you're trying to install
ovirt-master-snapshot on
el7.
> > > > >> > It won't work.
> > > > >> > Master is not supporting el7 anymore.
> > > > >> > You can use 4.3 snapshot rpm at :
> > > > >> >
> > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > >> if
> > > > >> > you need to stay on el7.
> > > > >> >
> > > > >> >
> > > > >> > > ----- Original Message -----
> > > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > >> > > Cc: "devel" < devel(a)ovirt.org >
> > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > > >> > > Subject: Re: [ovirt-devel] what's up with
> > > ansible-runner-service-dev
> > > > >> > > package?
> > > > >> > >
> > > > >> > > Hi Fedor,
> > > > >> > >
> > > > >> > > Please try:
> > > > >> > > 1. dnf install
> > > > >> > >
> > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > >> > > 2. dnf update
> > > > >> > > 3. dnf install ansible-runner-service-dev
> > > > >> > > 4. flow the instruction from thread 'New
dependency for
> > > development
> > > > >> > > environment'
> > > > >> > > The
> > > > >> > >
> > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
> > fgavrilo(a)redhat.com
> > > >
> > > > >> wrote:
> > > > >> > >
> > > > >> > > > Hi everyone,
> > > > >> > > >
> > > > >> > > > After I screwed up my dev environment beyond
repair I
have to
> > > set
> > > > >> it up
> > > > >> > > > again and I see something I haven't last
time (CentOS 7):
> > > > >> > > >
> > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > >> > > > Loaded plugins: fastestmirror
> > > > >> > > > Loading mirror speeds from cached hostfile
> > > > >> > > > * base: mirror.hosting90.cz
> > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > >> > > > * extras: mirror.hosting90.cz
> > > > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > > >> > > > * updates: mirror.hosting90.cz
> > > > >> > > > No package ansible-runner-service-dev
available.
> > > > >> > > >
> > > > >> > > > Maybe something's missing from my notes,
but where did it
go?
> > > > >> Should I
> > > > >> > > add
> > > > >> > > > some repo?
> > > > >> > > >
> > > > >> > > > Fedor
> > > > >> > > >
_______________________________________________
> > > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > > > oVirt Code of Conduct:
> > > > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > > > List Archives:
> > > > >> > > >
> > > > >> > >
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > >> > > >
> > > > >> > >
> > > > >> > >
> > > > >> > > --
> > > > >> > > Regards,
> > > > >> > > Eyal Shenitzky
> > > > >> > > _______________________________________________
> > > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > > oVirt Code of Conduct:
> > > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > > List Archives:
> > > > >> > >
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > >> > >
> > > > >> >
> > > > >> >
> > > > >> > --
> > > > >> >
> > > > >> > Sandro Bonazzola
> > > > >> >
> > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > > >> >
> > > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > > >> >
> > > > >> > sbonazzo(a)redhat.com
> > > > >> > < https://www.redhat.com/ >*Red Hat respects your
work life
> > balance.
> > > > >> > Therefore there is no need to answer this email out of
your
> > office
> > > > >> hours.
> > > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > > > >> > _______________________________________________
> > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > oVirt Code of Conduct:
> > > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > List Archives:
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > >> _______________________________________________
> > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> oVirt Code of Conduct:
> > > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > > >> List Archives:
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > >>
> > > > >
> > > > >
> > > > > --
> > > > > Regards,
> > > > > Eyal Shenitzky
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > >
> > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > >
> > > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> >
>
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
4:54 p.m.
New subject: what's up with ansible-runner-service-dev package?
Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder why I haven't got
this error sooner.
Also, given the workaround, does that mean that ansible-lint is optional?
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 2:21:14 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
Ok, thanks for the reaction :)
Getting back to the main topic, can anyone (please) try to compile the engine master now?
That's what I get when I try to:
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
hosted_engine_vm_cluster_name_result.stdout is undefined
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
Task/Handler: Install collectd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
Task/Handler: Install collectd plugins on engine
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
Task/Handler: Install collectd plugins on hosts
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
Task/Handler: Install collectd write_syslog plugin
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
Task/Handler: Check if fluentd is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
changed_when: fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
when: fluentd_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
Task/Handler: Check if rsyslog is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
changed_when: rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
when: rsyslog_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
Task/Handler: Check if collectd is running
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
Task/Handler: Install fluentd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
Task/Handler: Install fluentd engine plugins
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
Task/Handler: Install fluentd host plugins
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
when: stat_result.stat.exists == True
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
Task/Handler: Get ovirt_engine_fqdn
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
Task/Handler: Get ovirt_engine_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
Task/Handler: Get ovirt_engine_db_user
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
Task/Handler: Get ovirt_engine_history_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
Task/Handler: Get ovirt_engine_history_db_user
make[1]: *** [Makefile:401: validations] Error 2
make[1]: Leaving directory '/home/apple/git/ovirt-engine'
make: *** [Makefile:584: all-dev] Error 2
An extensive lecture from ansible, but what is this even about?
https://bugzilla.redhat.com/show_bug.cgi?id=1804268
...
----- Original Message -----
From: "Nir Soffer" < nsoffer(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana Elfassy"
< delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
Sent: Wednesday, March 18, 2020 11:45:28 AM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
For the time being I'm doing super careful clean installation of both engine and host
in hopes of getting dev env working again... results are yet to be seen.
What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master rpm for Fedora 30.
Correct name for the package is python3-ovirt-engine-sdk4. And more examples like that
with random package renamings.
README definitely needs an update. If you ask me, I would rather provide users with a
single version (Fedora 30 only) of dev installation docs that works rather than with two
versions that don't.
Please do the update.
Hopefully you will have more luck, my last README patch was abandoned after
it was neglected by engine maintainers.
https://gerrit.ovirt.org/c/106467/
Are there any reasons to keep CentOS 7 info there that's
irrelevant now?
It should be dropped now.
I can rework the docs for FC30 eventually if no one minds.
There is already a working fedora 30 instructions in the bottom of the
readme. It used to
work when Amit added it.
Or, if plans are to move to CentOS 8, maybe another brave soul can do
that.
Fedor
----- Original Message -----
From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
Sent: Tuesday, March 17, 2020 1:13:48 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
I just tried installing on Fedora 30 host and error stays the same, so it's probably
not as OS. Might try clean setup next, what else...
Liran, do you see anything of interest when you journalctl -u ansible-runner-service |
grep fatal ?
No, we do see a trackback on the command pointing out to
python3.7/site-packages/runner_service/services/jobs.py
But, because breakpoint that only makes things slower, I think it's timing/locking
issue somehow.
Fedor
----- Original Message -----
From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy" <
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
Sent: Tuesday, March 17, 2020 12:49:32 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com > wrote:
> I tried installing python 2 versions of some dependencies in addition to
> python 3 (as https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> is not clear about it at all. on Fedora 30 default versions of these
> libraries you get when not specifying python vesion in the name are python
> 2.)
> Now error looks slightly different :'D
>
> 2020-03-17 11:08:27,294+01 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> VDS_INSTALL_FAILED(505), Host banana installation failed. Internal server
> error, please check Ansible runner error log..
>
> Everything else stays the same, host install fails almost immediately.
> Does someone have any notes for Fedora 30 install they can share?
>
I start seeing it too:
ansible-runner-service-dev-1.0.1-1.fc30.noarch
python3-ansible-runner-1.3.4-2.fc30.noarch
engine:
http://pastebin.test.redhat.com/845373
of course no ansible log..
This is what journalctl show:
http://pastebin.test.redhat.com/845375
After doing some debugging in the engine, after setting a breakpoint in
AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with Step-Over
until the execution (lines 139-147) it does work. Without breaking point
and making things slower it throws the error.
>
> Thanks,
> Fedor
>
> ----- Original Message -----
> From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> To: "Martin Perina" < mperina(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:52:47 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Sorry, my bad, it was just under my nose. Systemctl is not aware of
> gunicorn-3, but when I check journalctl for ansible-runner-service I see
> the following:
>
> Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Starting gunicorn 19.9.0
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Listening at: http://127.0.0.1:50001 (2992)
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2992]
> [INFO] Using worker: sync
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2995]
> [INFO] Booting worker with pid: 2995
> Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100] [2997]
> [INFO] Booting worker with pid: 2997
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> options from /etc/ansible-runner-service/config.yaml
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
> environment variables
> Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> overridden
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> options from /etc/ansible-runner-service/config.yaml
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir to
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides from
> environment variables
> Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> overridden
>
> Is that any suspicious? :)
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:36:40 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
>
>
> On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
>
> Nothing since there is no such service (or similarly named).
> Package python3-gunicorn is installed though.
>
> After you start ansible-runner-service service, you should see similar
> logs in journalctl:
>
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Starting gunicorn 19.9.0
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1386] [INFO] Using worker: sync
> Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> [1496] [INFO] Booting worker with pid: 1496
> And more if you execute some action from engine (like install new host or
> upgrade a host)
>
>
>
> So does that mean that something was supposed to register it as a service
> but did not?
>
> Fedor
>
> ----- Original Message -----
> From: "Martin Perina" < mperina(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Monday, March 16, 2020 3:13:03 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
> > FC30 dev env engine indeed :) I've done this before on other OS, so
> unless
> > there is a blindspot somewhere in my eye it should be configured fine.
> >
> > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > ● ansible-runner-service.service - Ansible Runner Service
> > Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service;
> > enabled; vendor preset: disabled)
> > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min ago
> > Main PID: 909 (gunicorn-3)
> > Tasks: 9 (limit: 4915)
> > Memory: 193.4M
> > CGroup: /system.slice/ansible-runner-service.service
> > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > -w 2 runner_service.wsgi:application
> > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > --private-key
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > --private-key
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > StrictHostKeyChecking=no -o Port=22 -o
> >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>
> > -o KbdInteractiveAu>
> >
> > And the config:
> >
> > ---
> > version: 1
> >
> > # playbooks_root_dir
> > # location of the playbooks that the service will start
> > playbooks_root_dir:
> >
> '/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>
> > # port
> > # tcp port for the service to listen to
> > port: 50001
> > #
> > # ip_address
> > # Specific IP address to bind to
> > # ip_address: '0.0.0.0'
> > target_user: root
> > #event_cache_size: 3
> > ssh_private_key:
> > '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> >
> > /home/apple/ovirt-engine is where engine is dev-installed. Not sure what
> > else to check now...
> >
>
> Anything strange in journalctl for gunicorn-3 service?
>
> >
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org >
> > Sent: Monday, March 16, 2020 2:56:59 PM
> > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> > wrote:
> >
> > > Actually, it was too early for me to celebrate.
> > >
> > > On Fedora 30, the engine compiles and runs fine, but when I try adding
> > the
> > > host installation fails almost immediately and I get the following
> errors
> > > in the engine logs:
> > >
> > > ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host installation
> > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> Failed
> > to
> > > execute Ansible host-deploy role: Internal server error, please check
> > > Ansible runner error log.. Please check logs for more details:
> > >
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > There is nothing else. There is no file
> > >
> >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > > Snapshot I'm using for the host is the same that worked just fine when
> > > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
> issue?
> > >
> >
> > As you mentioned building engine I assume you are using engine in dev
> env
> > on FC30, right? If so, have you manually configured
> ansible-runner-service
> > for dev env as mentioned in
> >
> >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > ?
> >
> >
> > > Thanks,
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > To: "Martin Perina" < mperina(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Hi,
> > >
> > > Resolved through installing engine on Fedora 30. From what I
> understand,
> > > CentOS 7 is not supported anymore.
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >, "Dana
Elfassy" <
> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >,
"Eyal Shenitzky"
> <
> > > eshenitz(a)redhat.com >
> > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > >
> > > Hi Fedor,
> > >
> > > ansible-runner-service-dev package is available from
> > >
> > >
> >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > repos which is included in ovirt-master-release package, which
> > > includes all repositories necessary for oVirt development:
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > >
> > > Was your issue resolved or not?
> > >
> > > Regards,
> > > Martin
> > >
> > >
> > >
> > >
> > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky < eshenitz(a)redhat.com
> >
> > > wrote:
> > >
> > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > >
> > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik < bzlotnik(a)redhat.com
>
> > wrote:
> > > >
> > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > > >>
> > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com >
> > > >> wrote:
> > > >> >
> > > >> > Hi Sandro,
> > > >> >
> > > >> > Thanks for the suggestion, but it seems to not help much.
> > > >> >
> > > >> > ansible-runner-service-dev still can't be found, I
checked repos
> > that
> > > >> are installed from
> > > >>
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > >> and haven't found similarly names packages either...
> > > >> >
> > > >> > $ sudo yum install ansible-runner-service-dev
> > > >> > Loaded plugins: fastestmirror
> > > >> > Repository centos-sclo-rh-release is listed more than once
in the
> > > >> configuration
> > > >> > Repository sac-gluster-ansible is listed more than once in
the
> > > >> configuration
> > > >> > Determining fastest mirrors
> > > >> > ovirt-4.3-epel/x86_64/metalink
> > > >>
> > > >> | 30 kB 00:00:00
> > > >> > ovirt-master-epel/x86_64/metalink
> > > >>
> > > >> | 30 kB 00:00:00
> > > >> > * base: ftp.sh.cvut.cz
> > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > >> > * extras: ftp.sh.cvut.cz
> > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > >> > * updates: ftp.sh.cvut.cz
> > > >> > base
> > > >>
> > > >> | 3.6 kB 00:00:00
> > > >> > centos-opstools-release
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > centos-ovirt-common-testing
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-ovirt44-testing
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-qemu-ev-release
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > centos-sclo-rh
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > centos-sclo-rh-release
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > centos-sclo-sclo
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > epel-apache-maven
> > > >>
> > > >> | 3.3 kB 00:00:00
> > > >> > extras
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-gluster6
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-opstools
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-ovirt43
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-centos-qemu-ev
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-4.3-epel
> > > >>
> > > >> | 5.3 kB 00:00:00
> > > >> > ovirt-4.3-snapshot
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-4.3-snapshot-static
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-4.3-virtio-win-latest
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-centos-gluster6
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-master-centos-opstools-testing
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > ovirt-master-epel
> > > >>
> > > >> | 5.3 kB 00:00:00
> > > >> > ovirt-master-snapshot
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-snapshot-static
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirt-master-virtio-win-latest
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > ovirtwebui-ovirt-web-ui-master
> > > >>
> > > >> | 3.0 kB 00:00:00
> > > >> > sac-gluster-ansible
> > > >>
> > > >> | 3.3 kB 00:00:00
> > > >> > updates
> > > >>
> > > >> | 2.9 kB 00:00:00
> > > >> > (1/32): base/7/x86_64/group_gz
> > > >>
> > > >> | 165 kB 00:00:00
> > > >> > (2/32): base/7/x86_64/primary_db
> > > >>
> > > >> | 6.0 MB 00:00:00
> > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > >>
> > > >> | 4.2 MB 00:00:00
> > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > >>
> > > >> | 9.3 kB 00:00:00
> > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > >>
> > > >> | 344 kB 00:00:00
> > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > >>
> > > >> | 1.1 kB 00:00:01
> > > >> > (7/32): extras/7/x86_64/primary_db
> > > >>
> > > >> | 164 kB 00:00:00
> > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > >>
> > > >> | 429 kB 00:00:01
> > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > > >>
> > > >> | 101 kB 00:00:01
> > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > >>
> > > >> | 116 kB 00:00:00
> > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > >>
> > > >> | 73 kB 00:00:00
> > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > >>
> > > >> | 90 kB 00:00:00
> > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > >>
> > > >> | 5.0 kB 00:00:01
> > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > >>
> > > >> | 1.0 MB 00:00:00
> > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > > >>
> > > >> | 429 kB 00:00:00
> > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > >>
> > > >> | 211 kB 00:00:00
> > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > >>
> > > >> | 3.4 kB 00:00:00
> > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > >>
> > > >> | 109 kB 00:00:00
> > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > > >>
> > > >> | 116 kB 00:00:00
> > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > >>
> > > >> | 90 kB 00:00:00
> > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > >>
> > > >> | 1.0 MB 00:00:00
> > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > >>
> > > >> | 54 kB 00:00:00
> > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > >>
> > > >> | 7.6 kB 00:00:01
> > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > > >>
> > > >> | 4.6 kB 00:00:00
> > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > > >>
> > > >> | 7.6 kB 00:00:00
> > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > >>
> > > >> | 4.2 MB 00:00:03
> > > >> > (29/32): updates/7/x86_64/primary_db
> > > >>
> > > >> | 6.7 MB 00:00:00
> > > >> > (30/32):
ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > >>
> > > >> | 611 kB 00:00:01
> > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > >>
> > > >> | 2.3 kB 00:00:00
> > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > >>
> > > >> | 13 kB 00:00:00
> > > >> > No package ansible-runner-service-dev available.
> > > >> > Error: Nothing to do
> > > >> >
> > > >> >
> > > >> > Fedor
> > > >> >
> > > >> > ----- Original Message -----
> > > >> > From: "Sandro Bonazzola" < sbonazzo(a)redhat.com
>
> > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com
>, "devel" <
> > devel(a)ovirt.org >
> > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > >> ansible-runner-service-dev package?
> > > >> >
> > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> > > >> fgavrilo(a)redhat.com >
> > > >> > ha scritto:
> > > >> >
> > > >> > > Thanks for the response, Eyal!
> > > >> > >
> > > >> > > I already had ovirt-master repo installed, but updated
> everything
> > > >> just in
> > > >> > > case.
> > > >> > > I even tried both yum and dnf (since yum on centos was
giving
> me
> > > lots
> > > >> of
> > > >> > > grief before and I learned their behaviour differs,
especially
> > when
> > > it
> > > >> > > comes to bugs) but none works...
> > > >> > >
> > > >> > > >No package ansible-runner-service-dev available.
> > > >> > > >No match for argument: ansible-runner-service-dev
> > > >> > >
> > > >> > > Fedor
> > > >> > >
> > > >> > >
> > > >> > Looks like you're trying to install
ovirt-master-snapshot on el7.
> > > >> > It won't work.
> > > >> > Master is not supporting el7 anymore.
> > > >> > You can use 4.3 snapshot rpm at :
> > > >> >
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > >> if
> > > >> > you need to stay on el7.
> > > >> >
> > > >> >
> > > >> > > ----- Original Message -----
> > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > >> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > >> > > Cc: "devel" < devel(a)ovirt.org >
> > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > >> > > Subject: Re: [ovirt-devel] what's up with
> > ansible-runner-service-dev
> > > >> > > package?
> > > >> > >
> > > >> > > Hi Fedor,
> > > >> > >
> > > >> > > Please try:
> > > >> > > 1. dnf install
> > > >> > >
> http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > >> > > 2. dnf update
> > > >> > > 3. dnf install ansible-runner-service-dev
> > > >> > > 4. flow the instruction from thread 'New dependency
for
> > development
> > > >> > > environment'
> > > >> > > The
> > > >> > >
> > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > >
> > > >> wrote:
> > > >> > >
> > > >> > > > Hi everyone,
> > > >> > > >
> > > >> > > > After I screwed up my dev environment beyond
repair I have to
> > set
> > > >> it up
> > > >> > > > again and I see something I haven't last time
(CentOS 7):
> > > >> > > >
> > > >> > > > $ sudo yum install ansible-runner-service-dev
> > > >> > > > Loaded plugins: fastestmirror
> > > >> > > > Loading mirror speeds from cached hostfile
> > > >> > > > * base: mirror.hosting90.cz
> > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > >> > > > * extras: mirror.hosting90.cz
> > > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > >> > > > * updates: mirror.hosting90.cz
> > > >> > > > No package ansible-runner-service-dev available.
> > > >> > > >
> > > >> > > > Maybe something's missing from my notes, but
where did it go?
> > > >> Should I
> > > >> > > add
> > > >> > > > some repo?
> > > >> > > >
> > > >> > > > Fedor
> > > >> > > > _______________________________________________
> > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > > > oVirt Code of Conduct:
> > > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > >> > > > List Archives:
> > > >> > > >
> > > >> > >
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> > > --
> > > >> > > Regards,
> > > >> > > Eyal Shenitzky
> > > >> > > _______________________________________________
> > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > >> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > >> > > oVirt Code of Conduct:
> > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > >> > > List Archives:
> > > >> > >
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > >> > >
> > > >> >
> > > >> >
> > > >> > --
> > > >> >
> > > >> > Sandro Bonazzola
> > > >> >
> > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > >> >
> > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > >> >
> > > >> > sbonazzo(a)redhat.com
> > > >> > < https://www.redhat.com/ >*Red Hat respects your work
life
> balance.
> > > >> > Therefore there is no need to answer this email out of your
> office
> > > >> hours.
> > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > > >> > _______________________________________________
> > > >> > Devel mailing list -- devel(a)ovirt.org
> > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > >> > oVirt Code of Conduct:
> > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > >> > List Archives:
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > >> _______________________________________________
> > > >> Devel mailing list -- devel(a)ovirt.org
> > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > >> oVirt Code of Conduct:
> > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > >> List Archives:
> > > >>
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > >>
> > > >
> > > >
> > > > --
> > > > Regards,
> > > > Eyal Shenitzky
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > >
> > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
> >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > >
> > >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> >
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
>
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
5:15 p.m.
On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder
why I
haven't got this error sooner.
Also, given the workaround, does that mean that ansible-lint is optional?
Yes, same as pep8, pyflake and other build check tools
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 2:21:14 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
Ok, thanks for the reaction :)
Getting back to the main topic, can anyone (please) try to compile the
engine master now?
That's what I get when I try to:
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
hosted_engine_vm_cluster_name_result.stdout is undefined
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
Task/Handler: Install collectd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
Task/Handler: Install collectd plugins on engine
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
Task/Handler: Install collectd plugins on hosts
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
Task/Handler: Install collectd write_syslog plugin
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
Task/Handler: Check if fluentd is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
changed_when: fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
when: fluentd_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
Task/Handler: Check if rsyslog is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
changed_when: rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
when: rsyslog_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
Task/Handler: Check if collectd is running
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
Task/Handler: Install fluentd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
Task/Handler: Install fluentd engine plugins
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
Task/Handler: Install fluentd host plugins
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
when: stat_result.stat.exists == True
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
Task/Handler: Get ovirt_engine_fqdn
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
Task/Handler: Get ovirt_engine_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
Task/Handler: Get ovirt_engine_db_user
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
Task/Handler: Get ovirt_engine_history_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
Task/Handler: Get ovirt_engine_history_db_user
make[1]: *** [Makefile:401: validations] Error 2
make[1]: Leaving directory '/home/apple/git/ovirt-engine'
make: *** [Makefile:584: all-dev] Error 2
An extensive lecture from ansible, but what is this even about?
https://bugzilla.redhat.com/show_bug.cgi?id=1804268
...
----- Original Message -----
From: "Nir Soffer" < nsoffer(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana Elfassy"
<
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
Sent: Wednesday, March 18, 2020 11:45:28 AM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
>
> For the time being I'm doing super careful clean installation of both
engine and host in hopes of getting dev env working again... results are
yet to be seen.
> What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master
rpm for Fedora 30. Correct name for the package is
python3-ovirt-engine-sdk4. And more examples like that with random package
renamings.
>
> README definitely needs an update. If you ask me, I would rather provide
users with a single version (Fedora 30 only) of dev installation docs that
works rather than with two versions that don't.
Please do the update.
Hopefully you will have more luck, my last README patch was abandoned
after
it was neglected by engine maintainers.
https://gerrit.ovirt.org/c/106467/
> Are there any reasons to keep CentOS 7 info there that's irrelevant now?
It should be dropped now.
> I can rework the docs for FC30 eventually if no one minds.
There is already a working fedora 30 instructions in the bottom of the
readme. It used to
work when Amit added it.
> Or, if plans are to move to CentOS 8, maybe another brave soul can do
that.
> Fedor
>
> ----- Original Message -----
> From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Tuesday, March 17, 2020 1:13:48 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
>
>
> On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
>
>
> I just tried installing on Fedora 30 host and error stays the same, so
it's probably not as OS. Might try clean setup next, what else...
>
> Liran, do you see anything of interest when you journalctl -u
ansible-runner-service | grep fatal ?
> No, we do see a trackback on the command pointing out to
python3.7/site-packages/runner_service/services/jobs.py
> But, because breakpoint that only makes things slower, I think it's
timing/locking issue somehow.
>
>
>
> Fedor
>
> ----- Original Message -----
> From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy"
<
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> Sent: Tuesday, March 17, 2020 12:49:32 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
> On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
>
> > I tried installing python 2 versions of some dependencies in addition
to
> > python 3 (as
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > is not clear about it at all. on Fedora 30 default versions of these
> > libraries you get when not specifying python vesion in the name are
python
> > 2.)
> > Now error looks slightly different :'D
> >
> > 2020-03-17 11:08:27,294+01 ERROR
> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
server
> > error, please check Ansible runner error log..
> >
> > Everything else stays the same, host install fails almost immediately.
> > Does someone have any notes for Fedora 30 install they can share?
> >
> I start seeing it too:
> ansible-runner-service-dev-1.0.1-1.fc30.noarch
> python3-ansible-runner-1.3.4-2.fc30.noarch
> engine:
> http://pastebin.test.redhat.com/845373
> of course no ansible log..
> This is what journalctl show:
> http://pastebin.test.redhat.com/845375
>
> After doing some debugging in the engine, after setting a breakpoint in
> AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
Step-Over
> until the execution (lines 139-147) it does work. Without breaking point
> and making things slower it throws the error.
>
> >
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > To: "Martin Perina" < mperina(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:52:47 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > gunicorn-3, but when I check journalctl for ansible-runner-service I
see
> > the following:
> >
> > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Starting gunicorn 19.9.0
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Using worker: sync
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2995]
> > [INFO] Booting worker with pid: 2995
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2997]
> > [INFO] Booting worker with pid: 2997
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > options from /etc/ansible-runner-service/config.yaml
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
to
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
from
> > environment variables
> > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > overridden
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > options from /etc/ansible-runner-service/config.yaml
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
to
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
from
> > environment variables
> > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > overridden
> >
> > Is that any suspicious? :)
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:36:40 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> >
> >
> > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > wrote:
> >
> >
> > Nothing since there is no such service (or similarly named).
> > Package python3-gunicorn is installed though.
> >
> > After you start ansible-runner-service service, you should see similar
> > logs in journalctl:
> >
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Starting gunicorn 19.9.0
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Using worker: sync
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1496] [INFO] Booting worker with pid: 1496
> > And more if you execute some action from engine (like install new host
or
> > upgrade a host)
> >
> >
> >
> > So does that mean that something was supposed to register it as a
service
> > but did not?
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:13:03 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > wrote:
> >
> > > FC30 dev env engine indeed :) I've done this before on other OS, so
> > unless
> > > there is a blindspot somewhere in my eye it should be configured
fine.
> > >
> > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > ● ansible-runner-service.service - Ansible Runner Service
> > > Loaded: loaded
(/usr/lib/systemd/system/ansible-runner-service.service;
> > > enabled; vendor preset: disabled)
> > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min
ago
> > > Main PID: 909 (gunicorn-3)
> > > Tasks: 9 (limit: 4915)
> > > Memory: 193.4M
> > > CGroup: /system.slice/ansible-runner-service.service
> > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > --private-key
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > --private-key
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > StrictHostKeyChecking=no -o Port=22 -o
> > >
> >
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> >
> > > -o KbdInteractiveAu>
> > >
> > > And the config:
> > >
> > > ---
> > > version: 1
> > >
> > > # playbooks_root_dir
> > > # location of the playbooks that the service will start
> > > playbooks_root_dir:
> > >
> >
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> >
> > > # port
> > > # tcp port for the service to listen to
> > > port: 50001
> > > #
> > > # ip_address
> > > # Specific IP address to bind to
> > > # ip_address: '0.0.0.0'
> > > target_user: root
> > > #event_cache_size: 3
> > > ssh_private_key:
> > >
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > >
> > > /home/apple/ovirt-engine is where engine is dev-installed. Not sure
what
> > > else to check now...
> > >
> >
> > Anything strange in journalctl for gunicorn-3 service?
> >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org >
> > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > package?
> > >
> > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > > wrote:
> > >
> > > > Actually, it was too early for me to celebrate.
> > > >
> > > > On Fedora 30, the engine compiles and runs fine, but when I try
adding
> > > the
> > > > host installation fails almost immediately and I get the following
> > errors
> > > > in the engine logs:
> > > >
> > > > ERROR
[org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
installation
> > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> > Failed
> > > to
> > > > execute Ansible host-deploy role: Internal server error, please
check
> > > > Ansible runner error log.. Please check logs for more details:
> > > >
> > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > There is nothing else. There is no file
> > > >
> > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > > Snapshot I'm using for the host is the same that worked just
fine
when
> > > > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
> > issue?
> > > >
> > >
> > > As you mentioned building engine I assume you are using engine in
dev
> > env
> > > on FC30, right? If so, have you manually configured
> > ansible-runner-service
> > > for dev env as mentioned in
> > >
> > >
> >
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > ?
> > >
> > >
> > > > Thanks,
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > > package?
> > > >
> > > > Hi,
> > > >
> > > > Resolved through installing engine on Fedora 30. From what I
> > understand,
> > > > CentOS 7 is not supported anymore.
> > > >
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >,
"Dana Elfassy" <
> > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org
>, "Eyal
Shenitzky"
> > <
> > > > eshenitz(a)redhat.com >
> > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > package?
> > > >
> > > > Hi Fedor,
> > > >
> > > > ansible-runner-service-dev package is available from
> > > >
> > > >
> > >
> >
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > repos which is included in ovirt-master-release package, which
> > > > includes all repositories necessary for oVirt development:
> > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > >
> > > > Was your issue resolved or not?
> > > >
> > > > Regards,
> > > > Martin
> > > >
> > > >
> > > >
> > > >
> > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
eshenitz(a)redhat.com
> > >
> > > > wrote:
> > > >
> > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > > >
> > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
bzlotnik(a)redhat.com >
> > > wrote:
> > > > >
> > > > >> ansible-runner was added in 4.4, you shouldn't need in
4.3
> > > > >>
> > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> > fgavrilo(a)redhat.com >
> > > > >> wrote:
> > > > >> >
> > > > >> > Hi Sandro,
> > > > >> >
> > > > >> > Thanks for the suggestion, but it seems to not help
much.
> > > > >> >
> > > > >> > ansible-runner-service-dev still can't be found, I
checked
repos
> > > that
> > > > >> are installed from
> > > > >>
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > >> and haven't found similarly names packages either...
> > > > >> >
> > > > >> > $ sudo yum install ansible-runner-service-dev
> > > > >> > Loaded plugins: fastestmirror
> > > > >> > Repository centos-sclo-rh-release is listed more than
once in
the
> > > > >> configuration
> > > > >> > Repository sac-gluster-ansible is listed more than once
in
the
> > > > >> configuration
> > > > >> > Determining fastest mirrors
> > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > >>
> > > > >> | 30 kB 00:00:00
> > > > >> > ovirt-master-epel/x86_64/metalink
> > > > >>
> > > > >> | 30 kB 00:00:00
> > > > >> > * base: ftp.sh.cvut.cz
> > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > >> > * extras: ftp.sh.cvut.cz
> > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > > >> > * updates: ftp.sh.cvut.cz
> > > > >> > base
> > > > >>
> > > > >> | 3.6 kB 00:00:00
> > > > >> > centos-opstools-release
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > centos-ovirt-common-testing
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-ovirt44-testing
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-qemu-ev-release
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-sclo-rh
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > centos-sclo-rh-release
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > centos-sclo-sclo
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > epel-apache-maven
> > > > >>
> > > > >> | 3.3 kB 00:00:00
> > > > >> > extras
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-gluster6
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-opstools
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-ovirt43
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-qemu-ev
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-epel
> > > > >>
> > > > >> | 5.3 kB 00:00:00
> > > > >> > ovirt-4.3-snapshot
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-4.3-snapshot-static
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-4.3-virtio-win-latest
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-centos-gluster6
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-master-centos-opstools-testing
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-master-epel
> > > > >>
> > > > >> | 5.3 kB 00:00:00
> > > > >> > ovirt-master-snapshot
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-snapshot-static
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-virtio-win-latest
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > sac-gluster-ansible
> > > > >>
> > > > >> | 3.3 kB 00:00:00
> > > > >> > updates
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > (1/32): base/7/x86_64/group_gz
> > > > >>
> > > > >> | 165 kB 00:00:00
> > > > >> > (2/32): base/7/x86_64/primary_db
> > > > >>
> > > > >> | 6.0 MB 00:00:00
> > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > >>
> > > > >> | 4.2 MB 00:00:00
> > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > > >>
> > > > >> | 9.3 kB 00:00:00
> > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > >>
> > > > >> | 344 kB 00:00:00
> > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > > >>
> > > > >> | 1.1 kB 00:00:01
> > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > >>
> > > > >> | 164 kB 00:00:00
> > > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > > >>
> > > > >> | 429 kB 00:00:01
> > > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > > > >>
> > > > >> | 101 kB 00:00:01
> > > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > >>
> > > > >> | 116 kB 00:00:00
> > > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > >>
> > > > >> | 73 kB 00:00:00
> > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > >>
> > > > >> | 90 kB 00:00:00
> > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > >>
> > > > >> | 5.0 kB 00:00:01
> > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > >>
> > > > >> | 1.0 MB 00:00:00
> > > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > >>
> > > > >> | 429 kB 00:00:00
> > > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > >>
> > > > >> | 211 kB 00:00:00
> > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > >>
> > > > >> | 109 kB 00:00:00
> > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > >>
> > > > >> | 116 kB 00:00:00
> > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > >>
> > > > >> | 90 kB 00:00:00
> > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > >>
> > > > >> | 1.0 MB 00:00:00
> > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > >>
> > > > >> | 54 kB 00:00:00
> > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > > >>
> > > > >> | 7.6 kB 00:00:01
> > > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > > > >>
> > > > >> | 4.6 kB 00:00:00
> > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > > > >>
> > > > >> | 7.6 kB 00:00:00
> > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > > >>
> > > > >> | 4.2 MB 00:00:03
> > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (30/32):
ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > >>
> > > > >> | 611 kB 00:00:01
> > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > >>
> > > > >> | 2.3 kB 00:00:00
> > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > > >>
> > > > >> | 13 kB 00:00:00
> > > > >> > No package ansible-runner-service-dev available.
> > > > >> > Error: Nothing to do
> > > > >> >
> > > > >> >
> > > > >> > Fedor
> > > > >> >
> > > > >> > ----- Original Message -----
> > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com
>, "devel" <
> > > devel(a)ovirt.org >
> > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > > >> ansible-runner-service-dev package?
> > > > >> >
> > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov
<
> > > > >> fgavrilo(a)redhat.com >
> > > > >> > ha scritto:
> > > > >> >
> > > > >> > > Thanks for the response, Eyal!
> > > > >> > >
> > > > >> > > I already had ovirt-master repo installed, but
updated
> > everything
> > > > >> just in
> > > > >> > > case.
> > > > >> > > I even tried both yum and dnf (since yum on centos
was
giving
> > me
> > > > lots
> > > > >> of
> > > > >> > > grief before and I learned their behaviour
differs,
especially
> > > when
> > > > it
> > > > >> > > comes to bugs) but none works...
> > > > >> > >
> > > > >> > > >No package ansible-runner-service-dev
available.
> > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > >> > >
> > > > >> > > Fedor
> > > > >> > >
> > > > >> > >
> > > > >> > Looks like you're trying to install
ovirt-master-snapshot on
el7.
> > > > >> > It won't work.
> > > > >> > Master is not supporting el7 anymore.
> > > > >> > You can use 4.3 snapshot rpm at :
> > > > >> >
> > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > >> if
> > > > >> > you need to stay on el7.
> > > > >> >
> > > > >> >
> > > > >> > > ----- Original Message -----
> > > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > >> > > Cc: "devel" < devel(a)ovirt.org >
> > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > > >> > > Subject: Re: [ovirt-devel] what's up with
> > > ansible-runner-service-dev
> > > > >> > > package?
> > > > >> > >
> > > > >> > > Hi Fedor,
> > > > >> > >
> > > > >> > > Please try:
> > > > >> > > 1. dnf install
> > > > >> > >
> > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > >> > > 2. dnf update
> > > > >> > > 3. dnf install ansible-runner-service-dev
> > > > >> > > 4. flow the instruction from thread 'New
dependency for
> > > development
> > > > >> > > environment'
> > > > >> > > The
> > > > >> > >
> > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
> > fgavrilo(a)redhat.com
> > > >
> > > > >> wrote:
> > > > >> > >
> > > > >> > > > Hi everyone,
> > > > >> > > >
> > > > >> > > > After I screwed up my dev environment beyond
repair I
have to
> > > set
> > > > >> it up
> > > > >> > > > again and I see something I haven't last
time (CentOS 7):
> > > > >> > > >
> > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > >> > > > Loaded plugins: fastestmirror
> > > > >> > > > Loading mirror speeds from cached hostfile
> > > > >> > > > * base: mirror.hosting90.cz
> > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > >> > > > * extras: mirror.hosting90.cz
> > > > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > > >> > > > * updates: mirror.hosting90.cz
> > > > >> > > > No package ansible-runner-service-dev
available.
> > > > >> > > >
> > > > >> > > > Maybe something's missing from my notes,
but where did it
go?
> > > > >> Should I
> > > > >> > > add
> > > > >> > > > some repo?
> > > > >> > > >
> > > > >> > > > Fedor
> > > > >> > > >
_______________________________________________
> > > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > > > oVirt Code of Conduct:
> > > > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > > > List Archives:
> > > > >> > > >
> > > > >> > >
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > >> > > >
> > > > >> > >
> > > > >> > >
> > > > >> > > --
> > > > >> > > Regards,
> > > > >> > > Eyal Shenitzky
> > > > >> > > _______________________________________________
> > > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > > oVirt Code of Conduct:
> > > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > > List Archives:
> > > > >> > >
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > >> > >
> > > > >> >
> > > > >> >
> > > > >> > --
> > > > >> >
> > > > >> > Sandro Bonazzola
> > > > >> >
> > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > > >> >
> > > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > > >> >
> > > > >> > sbonazzo(a)redhat.com
> > > > >> > < https://www.redhat.com/ >*Red Hat respects your
work life
> > balance.
> > > > >> > Therefore there is no need to answer this email out of
your
> > office
> > > > >> hours.
> > > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > > > >> > _______________________________________________
> > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > oVirt Code of Conduct:
> > > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > List Archives:
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > >> _______________________________________________
> > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> oVirt Code of Conduct:
> > > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > > >> List Archives:
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > >>
> > > > >
> > > > >
> > > > > --
> > > > > Regards,
> > > > > Eyal Shenitzky
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > >
> > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > >
> > > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> >
>
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
6:24 p.m.
New subject: what's up with ansible-runner-service-dev package?
Wow. I did not expect that, but after clean setup the error is still there.
I can't add fedora 30 host to fedora 30 engine.
Here is a full bash history for the host machine since OS was installed:
sudo yum update
sudo systemctl enable sshd
sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
sudo nmcli connection mod ens3 ipv4.method manual
sudo vi /etc/hosts
sudo poweroff
sudo yum install cockpit-ovirt-dashboard
sudo systemctl enable cockpit.socket --now
Same for the engine machine (I was installing dependencies separetely because 1. yum bugs
& 2. I was checking if versions are correct one by one):
sudo yum update
sudo systemctl enable sshd
sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24
sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
sudo nmcli connection mod ens3 ipv4.method manual
sudo vi /etc/hosts
sudo poweroff
sudo yum install java-11-openjdk-devel
sudo yum install java-1.8.0-openjdk-headless
sudo yum install mailcap
sudo yum install unzip
sudo yum install openssl
sudo yum install bind-utils
sudo yum install postgresql-server
sudo yum install postgresql
sudo yum install postgresql-contrib
sudo yum install python2-dateutil
sudo yum install python3-dateutil
sudo yum install python2-m2crypto
sudo yum install python3-m2crypto
sudo yum install python2-psycopg2
sudo yum install python3-psycopg2
sudo yum install python2-jinja2
sudo yum install python3-jinja2
sudo yum install python2-libxml2
sudo yum install python3-libxml2
sudo yum install python2-daemon
sudo yum install python3-daemon
wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
sudo yum install ./ovirt-release-master.rpm -y
sudo yum install otopi
sudo yum install python3-ovirt-setup-lib
sudo yum install maven
sudo yum install ansible
sudo yum install ansible-runner-service-dev
sudo yum install ovirt-ansible-roles
sudo yum install ovirt-engine-metrics
sudo yum install python3-ovirt-engine-sdk4
sudo yum install pyflakes
sudo yum install python-pep8
sudo yum install python3-docker
sudo yum install python3-isort
sudo yum install gcc
sudo yum install python2-devel
sudo yum install systemd-python
sudo yum install python-webob
sudo yum install redhat-rpm-config
sudo yum install scl-utils
sudo yum install ovirt-imageio-common
sudo yum install make
sudo yum install python-requests
sudo yum install python-subprocess32
sudo alternatives --config java
sudo yum install ovirt-engine-wildfly
sudo yum install ovirt-engine-wildfly-overlay
sudo vi /etc/security/limits.d/10-nofile.conf
sudo firewall-cmd --add-port=8080/tcp --permanent
sudo firewall-cmd --add-port=8443/tcp --permanent
sudo firewall-cmd --add-port=8787/tcp --permanent
sudo firewall-cmd --add-port=5432/tcp --permanent
sudo firewall-cmd --add-port=54323/tcp --permanent
sudo firewall-cmd --reload
sudo postgresql-setup --initdb --unit postgresql
sudo vi /var/lib/pgsql/data/pg_hba.conf
sudo vi /var/lib/pgsql/data/postgresql.conf
sudo systemctl enable postgresql --now
sudo systemctl status postgresql
sudo su - postgres -c "psql -d template1"
sudo su - postgres -c "psql -d engine"
sudo vi /etc/ansible-runner-service/config.yaml
sudo systemctl enable ansible-runner-service --now
sudo systemctl status ansible-runner-service
sudo yum install git
mkdir ~/git && cd ~/git
git clone git://gerrit.ovirt.org/ovirt-imageio
git clone git://gerrit.ovirt.org/ovirt-engine
vi ~/.bashrc
sudo reboot
cd ovirt-engine/
make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1
cd ~/git/ovirt-imageio/
make
cd proxy/
make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
~/ovirt-engine/bin/engine-setup
~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
vi ~/.bashrc
vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
sudo poweroff
I don't know what's wrong. It does not work.
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 3:15:15 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder
why I
haven't got this error sooner.
Also, given the workaround, does that mean that ansible-lint is optional?
Yes, same as pep8, pyflake and other build check tools
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 2:21:14 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
Ok, thanks for the reaction :)
Getting back to the main topic, can anyone (please) try to compile the
engine master now?
That's what I get when I try to:
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
[602] Don't compare to empty string
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
hosted_engine_vm_cluster_name_result.stdout is undefined
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
Task/Handler: Install collectd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
Task/Handler: Install collectd plugins on engine
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
Task/Handler: Install collectd plugins on hosts
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
Task/Handler: Install collectd write_syslog plugin
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
Task/Handler: Check if fluentd is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
changed_when: fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
- fluentd_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
when: fluentd_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
Task/Handler: Check if rsyslog is running
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
changed_when: rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
- rsyslog_is_running|default(false)|bool == true
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
when: rsyslog_is_running|default(false)|bool == false
[303] systemctl used in place of systemd module
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
Task/Handler: Check if collectd is running
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
Task/Handler: Install fluentd package
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
Task/Handler: Install fluentd engine plugins
[403] Package installs should not use latest
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
Task/Handler: Install fluentd host plugins
[601] Don't compare to literal True/False
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
when: stat_result.stat.exists == True
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
Task/Handler: Get ovirt_engine_fqdn
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
Task/Handler: Get ovirt_engine_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
Task/Handler: Get ovirt_engine_db_user
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
Task/Handler: Get ovirt_engine_history_db_name
[301] Commands should not change things if nothing needs doing
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
Task/Handler: Get ovirt_engine_history_db_user
make[1]: *** [Makefile:401: validations] Error 2
make[1]: Leaving directory '/home/apple/git/ovirt-engine'
make: *** [Makefile:584: all-dev] Error 2
An extensive lecture from ansible, but what is this even about?
https://bugzilla.redhat.com/show_bug.cgi?id=1804268
...
----- Original Message -----
From: "Nir Soffer" < nsoffer(a)redhat.com >
To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana Elfassy"
<
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
Sent: Wednesday, March 18, 2020 11:45:28 AM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
>
> For the time being I'm doing super careful clean installation of both
engine and host in hopes of getting dev env working again... results are
yet to be seen.
> What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master
rpm for Fedora 30. Correct name for the package is
python3-ovirt-engine-sdk4. And more examples like that with random package
renamings.
>
> README definitely needs an update. If you ask me, I would rather provide
users with a single version (Fedora 30 only) of dev installation docs that
works rather than with two versions that don't.
Please do the update.
Hopefully you will have more luck, my last README patch was abandoned
after
it was neglected by engine maintainers.
https://gerrit.ovirt.org/c/106467/
> Are there any reasons to keep CentOS 7 info there that's irrelevant now?
It should be dropped now.
> I can rework the docs for FC30 eventually if no one minds.
There is already a working fedora 30 instructions in the bottom of the
readme. It used to
work when Amit added it.
> Or, if plans are to move to CentOS 8, maybe another brave soul can do
that.
> Fedor
>
> ----- Original Message -----
> From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >
> Sent: Tuesday, March 17, 2020 1:13:48 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
>
>
> On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
>
>
> I just tried installing on Fedora 30 host and error stays the same, so
it's probably not as OS. Might try clean setup next, what else...
>
> Liran, do you see anything of interest when you journalctl -u
ansible-runner-service | grep fatal ?
> No, we do see a trackback on the command pointing out to
python3.7/site-packages/runner_service/services/jobs.py
> But, because breakpoint that only makes things slower, I think it's
timing/locking issue somehow.
>
>
>
> Fedor
>
> ----- Original Message -----
> From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana Elfassy"
<
delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> Sent: Tuesday, March 17, 2020 12:49:32 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
> On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
wrote:
>
> > I tried installing python 2 versions of some dependencies in addition
to
> > python 3 (as
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > is not clear about it at all. on Fedora 30 default versions of these
> > libraries you get when not specifying python vesion in the name are
python
> > 2.)
> > Now error looks slightly different :'D
> >
> > 2020-03-17 11:08:27,294+01 ERROR
> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
server
> > error, please check Ansible runner error log..
> >
> > Everything else stays the same, host install fails almost immediately.
> > Does someone have any notes for Fedora 30 install they can share?
> >
> I start seeing it too:
> ansible-runner-service-dev-1.0.1-1.fc30.noarch
> python3-ansible-runner-1.3.4-2.fc30.noarch
> engine:
> http://pastebin.test.redhat.com/845373
> of course no ansible log..
> This is what journalctl show:
> http://pastebin.test.redhat.com/845375
>
> After doing some debugging in the engine, after setting a breakpoint in
> AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
Step-Over
> until the execution (lines 139-147) it does work. Without breaking point
> and making things slower it throws the error.
>
> >
> > Thanks,
> > Fedor
> >
> > ----- Original Message -----
> > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > To: "Martin Perina" < mperina(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:52:47 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > gunicorn-3, but when I check journalctl for ansible-runner-service I
see
> > the following:
> >
> > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Starting gunicorn 19.9.0
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2992]
> > [INFO] Using worker: sync
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2995]
> > [INFO] Booting worker with pid: 2995
> > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
[2997]
> > [INFO] Booting worker with pid: 2997
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > options from /etc/ansible-runner-service/config.yaml
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
to
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
from
> > environment variables
> > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > overridden
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > options from /etc/ansible-runner-service/config.yaml
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
to
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
from
> > environment variables
> > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > overridden
> >
> > Is that any suspicious? :)
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:36:40 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> >
> >
> > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > wrote:
> >
> >
> > Nothing since there is no such service (or similarly named).
> > Package python3-gunicorn is installed though.
> >
> > After you start ansible-runner-service service, you should see similar
> > logs in journalctl:
> >
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Starting gunicorn 19.9.0
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1386] [INFO] Using worker: sync
> > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > [1496] [INFO] Booting worker with pid: 1496
> > And more if you execute some action from engine (like install new host
or
> > upgrade a host)
> >
> >
> >
> > So does that mean that something was supposed to register it as a
service
> > but did not?
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Martin Perina" < mperina(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org
>
> > Sent: Monday, March 16, 2020 3:13:03 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> >
> > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > wrote:
> >
> > > FC30 dev env engine indeed :) I've done this before on other OS, so
> > unless
> > > there is a blindspot somewhere in my eye it should be configured
fine.
> > >
> > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > ● ansible-runner-service.service - Ansible Runner Service
> > > Loaded: loaded
(/usr/lib/systemd/system/ansible-runner-service.service;
> > > enabled; vendor preset: disabled)
> > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min
ago
> > > Main PID: 909 (gunicorn-3)
> > > Tasks: 9 (limit: 4915)
> > > Memory: 193.4M
> > > CGroup: /system.slice/ansible-runner-service.service
> > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > -w 2 runner_service.wsgi:application
> > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > --private-key
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > --private-key
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > StrictHostKeyChecking=no -o Port=22 -o
> > >
> >
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> >
> > > -o KbdInteractiveAu>
> > >
> > > And the config:
> > >
> > > ---
> > > version: 1
> > >
> > > # playbooks_root_dir
> > > # location of the playbooks that the service will start
> > > playbooks_root_dir:
> > >
> >
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> >
> > > # port
> > > # tcp port for the service to listen to
> > > port: 50001
> > > #
> > > # ip_address
> > > # Specific IP address to bind to
> > > # ip_address: '0.0.0.0'
> > > target_user: root
> > > #event_cache_size: 3
> > > ssh_private_key:
> > >
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > >
> > > /home/apple/ovirt-engine is where engine is dev-installed. Not sure
what
> > > else to check now...
> > >
> >
> > Anything strange in journalctl for gunicorn-3 service?
> >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org >
> > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > package?
> > >
> > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > > wrote:
> > >
> > > > Actually, it was too early for me to celebrate.
> > > >
> > > > On Fedora 30, the engine compiles and runs fine, but when I try
adding
> > > the
> > > > host installation fails almost immediately and I get the following
> > errors
> > > > in the engine logs:
> > > >
> > > > ERROR
[org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
installation
> > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> > Failed
> > > to
> > > > execute Ansible host-deploy role: Internal server error, please
check
> > > > Ansible runner error log.. Please check logs for more details:
> > > >
> > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > There is nothing else. There is no file
> > > >
> > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > > Snapshot I'm using for the host is the same that worked just
fine
when
> > > > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
> > issue?
> > > >
> > >
> > > As you mentioned building engine I assume you are using engine in
dev
> > env
> > > on FC30, right? If so, have you manually configured
> > ansible-runner-service
> > > for dev env as mentioned in
> > >
> > >
> >
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > ?
> > >
> > >
> > > > Thanks,
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > > package?
> > > >
> > > > Hi,
> > > >
> > > > Resolved through installing engine on Fedora 30. From what I
> > understand,
> > > > CentOS 7 is not supported anymore.
> > > >
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >,
"Dana Elfassy" <
> > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org
>, "Eyal
Shenitzky"
> > <
> > > > eshenitz(a)redhat.com >
> > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > package?
> > > >
> > > > Hi Fedor,
> > > >
> > > > ansible-runner-service-dev package is available from
> > > >
> > > >
> > >
> >
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > repos which is included in ovirt-master-release package, which
> > > > includes all repositories necessary for oVirt development:
> > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > >
> > > > Was your issue resolved or not?
> > > >
> > > > Regards,
> > > > Martin
> > > >
> > > >
> > > >
> > > >
> > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
eshenitz(a)redhat.com
> > >
> > > > wrote:
> > > >
> > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > > >
> > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
bzlotnik(a)redhat.com >
> > > wrote:
> > > > >
> > > > >> ansible-runner was added in 4.4, you shouldn't need in
4.3
> > > > >>
> > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> > fgavrilo(a)redhat.com >
> > > > >> wrote:
> > > > >> >
> > > > >> > Hi Sandro,
> > > > >> >
> > > > >> > Thanks for the suggestion, but it seems to not help
much.
> > > > >> >
> > > > >> > ansible-runner-service-dev still can't be found, I
checked
repos
> > > that
> > > > >> are installed from
> > > > >>
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > >> and haven't found similarly names packages either...
> > > > >> >
> > > > >> > $ sudo yum install ansible-runner-service-dev
> > > > >> > Loaded plugins: fastestmirror
> > > > >> > Repository centos-sclo-rh-release is listed more than
once in
the
> > > > >> configuration
> > > > >> > Repository sac-gluster-ansible is listed more than once
in
the
> > > > >> configuration
> > > > >> > Determining fastest mirrors
> > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > >>
> > > > >> | 30 kB 00:00:00
> > > > >> > ovirt-master-epel/x86_64/metalink
> > > > >>
> > > > >> | 30 kB 00:00:00
> > > > >> > * base: ftp.sh.cvut.cz
> > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > >> > * extras: ftp.sh.cvut.cz
> > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > > >> > * updates: ftp.sh.cvut.cz
> > > > >> > base
> > > > >>
> > > > >> | 3.6 kB 00:00:00
> > > > >> > centos-opstools-release
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > centos-ovirt-common-testing
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-ovirt44-testing
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-qemu-ev-release
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > centos-sclo-rh
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > centos-sclo-rh-release
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > centos-sclo-sclo
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > epel-apache-maven
> > > > >>
> > > > >> | 3.3 kB 00:00:00
> > > > >> > extras
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-gluster6
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-opstools
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-ovirt43
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-centos-qemu-ev
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-4.3-epel
> > > > >>
> > > > >> | 5.3 kB 00:00:00
> > > > >> > ovirt-4.3-snapshot
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-4.3-snapshot-static
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-4.3-virtio-win-latest
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-centos-gluster6
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-master-centos-opstools-testing
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > ovirt-master-epel
> > > > >>
> > > > >> | 5.3 kB 00:00:00
> > > > >> > ovirt-master-snapshot
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-snapshot-static
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirt-master-virtio-win-latest
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > >>
> > > > >> | 3.0 kB 00:00:00
> > > > >> > sac-gluster-ansible
> > > > >>
> > > > >> | 3.3 kB 00:00:00
> > > > >> > updates
> > > > >>
> > > > >> | 2.9 kB 00:00:00
> > > > >> > (1/32): base/7/x86_64/group_gz
> > > > >>
> > > > >> | 165 kB 00:00:00
> > > > >> > (2/32): base/7/x86_64/primary_db
> > > > >>
> > > > >> | 6.0 MB 00:00:00
> > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > >>
> > > > >> | 4.2 MB 00:00:00
> > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > > >>
> > > > >> | 9.3 kB 00:00:00
> > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > >>
> > > > >> | 344 kB 00:00:00
> > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > > >>
> > > > >> | 1.1 kB 00:00:01
> > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > >>
> > > > >> | 164 kB 00:00:00
> > > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > > >>
> > > > >> | 429 kB 00:00:01
> > > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > > > >>
> > > > >> | 101 kB 00:00:01
> > > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > >>
> > > > >> | 116 kB 00:00:00
> > > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > >>
> > > > >> | 73 kB 00:00:00
> > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > >>
> > > > >> | 90 kB 00:00:00
> > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > >>
> > > > >> | 5.0 kB 00:00:01
> > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > >>
> > > > >> | 1.0 MB 00:00:00
> > > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > >>
> > > > >> | 429 kB 00:00:00
> > > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > >>
> > > > >> | 211 kB 00:00:00
> > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > > >>
> > > > >> | 3.4 kB 00:00:00
> > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > >>
> > > > >> | 109 kB 00:00:00
> > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > >>
> > > > >> | 116 kB 00:00:00
> > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > >>
> > > > >> | 90 kB 00:00:00
> > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > >>
> > > > >> | 1.0 MB 00:00:00
> > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > >>
> > > > >> | 54 kB 00:00:00
> > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > > >>
> > > > >> | 7.6 kB 00:00:01
> > > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > > > >>
> > > > >> | 4.6 kB 00:00:00
> > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > > > >>
> > > > >> | 7.6 kB 00:00:00
> > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > > >>
> > > > >> | 4.2 MB 00:00:03
> > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > >>
> > > > >> | 6.7 MB 00:00:00
> > > > >> > (30/32):
ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > >>
> > > > >> | 611 kB 00:00:01
> > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > >>
> > > > >> | 2.3 kB 00:00:00
> > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > > >>
> > > > >> | 13 kB 00:00:00
> > > > >> > No package ansible-runner-service-dev available.
> > > > >> > Error: Nothing to do
> > > > >> >
> > > > >> >
> > > > >> > Fedor
> > > > >> >
> > > > >> > ----- Original Message -----
> > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > >> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > >> > Cc: "Eyal Shenitzky" < eshenitz(a)redhat.com
>, "devel" <
> > > devel(a)ovirt.org >
> > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > > >> ansible-runner-service-dev package?
> > > > >> >
> > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov
<
> > > > >> fgavrilo(a)redhat.com >
> > > > >> > ha scritto:
> > > > >> >
> > > > >> > > Thanks for the response, Eyal!
> > > > >> > >
> > > > >> > > I already had ovirt-master repo installed, but
updated
> > everything
> > > > >> just in
> > > > >> > > case.
> > > > >> > > I even tried both yum and dnf (since yum on centos
was
giving
> > me
> > > > lots
> > > > >> of
> > > > >> > > grief before and I learned their behaviour
differs,
especially
> > > when
> > > > it
> > > > >> > > comes to bugs) but none works...
> > > > >> > >
> > > > >> > > >No package ansible-runner-service-dev
available.
> > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > >> > >
> > > > >> > > Fedor
> > > > >> > >
> > > > >> > >
> > > > >> > Looks like you're trying to install
ovirt-master-snapshot on
el7.
> > > > >> > It won't work.
> > > > >> > Master is not supporting el7 anymore.
> > > > >> > You can use 4.3 snapshot rpm at :
> > > > >> >
> > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > >> if
> > > > >> > you need to stay on el7.
> > > > >> >
> > > > >> >
> > > > >> > > ----- Original Message -----
> > > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > >> > > Cc: "devel" < devel(a)ovirt.org >
> > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > > >> > > Subject: Re: [ovirt-devel] what's up with
> > > ansible-runner-service-dev
> > > > >> > > package?
> > > > >> > >
> > > > >> > > Hi Fedor,
> > > > >> > >
> > > > >> > > Please try:
> > > > >> > > 1. dnf install
> > > > >> > >
> > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > >> > > 2. dnf update
> > > > >> > > 3. dnf install ansible-runner-service-dev
> > > > >> > > 4. flow the instruction from thread 'New
dependency for
> > > development
> > > > >> > > environment'
> > > > >> > > The
> > > > >> > >
> > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
> > fgavrilo(a)redhat.com
> > > >
> > > > >> wrote:
> > > > >> > >
> > > > >> > > > Hi everyone,
> > > > >> > > >
> > > > >> > > > After I screwed up my dev environment beyond
repair I
have to
> > > set
> > > > >> it up
> > > > >> > > > again and I see something I haven't last
time (CentOS 7):
> > > > >> > > >
> > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > >> > > > Loaded plugins: fastestmirror
> > > > >> > > > Loading mirror speeds from cached hostfile
> > > > >> > > > * base: mirror.hosting90.cz
> > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > >> > > > * extras: mirror.hosting90.cz
> > > > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > > >> > > > * updates: mirror.hosting90.cz
> > > > >> > > > No package ansible-runner-service-dev
available.
> > > > >> > > >
> > > > >> > > > Maybe something's missing from my notes,
but where did it
go?
> > > > >> Should I
> > > > >> > > add
> > > > >> > > > some repo?
> > > > >> > > >
> > > > >> > > > Fedor
> > > > >> > > >
_______________________________________________
> > > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > >> > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > > > oVirt Code of Conduct:
> > > > >> > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > > > List Archives:
> > > > >> > > >
> > > > >> > >
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > >> > > >
> > > > >> > >
> > > > >> > >
> > > > >> > > --
> > > > >> > > Regards,
> > > > >> > > Eyal Shenitzky
> > > > >> > > _______________________________________________
> > > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > >> > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > > oVirt Code of Conduct:
> > > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > > List Archives:
> > > > >> > >
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > >> > >
> > > > >> >
> > > > >> >
> > > > >> > --
> > > > >> >
> > > > >> > Sandro Bonazzola
> > > > >> >
> > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > > >> >
> > > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > > >> >
> > > > >> > sbonazzo(a)redhat.com
> > > > >> > < https://www.redhat.com/ >*Red Hat respects your
work life
> > balance.
> > > > >> > Therefore there is no need to answer this email out of
your
> > office
> > > > >> hours.
> > > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > > > >> > _______________________________________________
> > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > >> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> > oVirt Code of Conduct:
> > > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > > >> > List Archives:
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > >> _______________________________________________
> > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > >> oVirt Code of Conduct:
> > > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > > >> List Archives:
> > > > >>
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > >>
> > > > >
> > > > >
> > > > > --
> > > > > Regards,
> > > > > Eyal Shenitzky
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > >
> > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > >
> > > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> >
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> >
>
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
4:31 a.m.
On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Wow. I did not expect that, but after clean setup the error is still there.
I can't add fedora 30 host to fedora 30 engine.
Here is a full bash history for the host machine since OS was installed:
sudo yum update
Good
sudo systemctl enable sshd
You host installed without SSH server enabled?
sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
sudo nmcli connection mod ens3 ipv4.method manual
You can configure the network from the installer, less painful.
sudo vi /etc/hosts
sudo poweroff
sudo yum install cockpit-ovirt-dashboard
sudo systemctl enable cockpit.socket --now
Not sure why you need cockpit.
But you need:
sudo dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Same for the engine machine (I was installing dependencies separetely because 1. yum
bugs & 2. I was checking if versions are correct one by one):
>
> sudo yum update
sudo systemctl enable sshd
> sudo nmcli connection mod ens3
ipv4.addresses 192.168.111.2/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual
> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install java-11-openjdk-devel
> sudo yum install java-1.8.0-openjdk-headless
> sudo yum install mailcap
> sudo yum install unzip
> sudo yum install openssl
> sudo yum install bind-utils
> sudo yum install postgresql-server
> sudo yum install postgresql
> sudo yum install postgresql-contrib
> sudo yum install python2-dateutil
> sudo yum install python3-dateutil
> sudo yum install python2-m2crypto
> sudo yum install python3-m2crypto
> sudo yum install python2-psycopg2
> sudo yum install python3-psycopg2
> sudo yum install python2-jinja2
> sudo yum install python3-jinja2
> sudo yum install python2-libxml2
> sudo yum install python3-libxml2
> sudo yum install python2-daemon
> sudo yum install python3-daemon
wget
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
sudo yum install ./ovirt-release-master.rpm -y
Why not:
sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Also, you want to instal this first - before you install other
packages, so you get packages
from ovirt dependencies.
sudo yum install otopi
sudo yum install python3-ovirt-setup-lib
sudo yum install maven
sudo yum install ansible
sudo yum install ansible-runner-service-dev
sudo yum install ovirt-ansible-roles
sudo yum install ovirt-engine-metrics
sudo yum install python3-ovirt-engine-sdk4
sudo yum install pyflakes
sudo yum install python-pep8
sudo yum install python3-docker
sudo yum install python3-isort
sudo yum install gcc
sudo yum install python2-devel
sudo yum install systemd-python
sudo yum install python-webob
sudo yum install redhat-rpm-config
sudo yum install scl-utils
sudo yum install ovirt-imageio-common
Not needed, the ovirt-imageio-proxy will bring it.
sudo yum install make
sudo yum install python-requests
sudo yum install python-subprocess32
sudo alternatives --config java
sudo yum install ovirt-engine-wildfly
sudo yum install ovirt-engine-wildfly-overlay
sudo vi /etc/security/limits.d/10-nofile.conf
sudo firewall-cmd --add-port=8080/tcp --permanent
sudo firewall-cmd --add-port=8443/tcp --permanent
sudo firewall-cmd --add-port=8787/tcp --permanent
sudo firewall-cmd --add-port=5432/tcp --permanent
sudo firewall-cmd --add-port=54323/tcp --permanent
sudo firewall-cmd --reload
sudo postgresql-setup --initdb --unit postgresql
sudo vi /var/lib/pgsql/data/pg_hba.conf
sudo vi /var/lib/pgsql/data/postgresql.conf
sudo systemctl enable postgresql --now
sudo systemctl status postgresql
sudo su - postgres -c "psql -d template1"
sudo su - postgres -c "psql -d engine"
sudo -u postgres -i ?
sudo vi /etc/ansible-runner-service/config.yaml
sudo systemctl enable ansible-runner-service --now
sudo systemctl status ansible-runner-service
sudo yum install git
mkdir ~/git && cd ~/git
git clone git://gerrit.ovirt.org/ovirt-imageio
git clone git://gerrit.ovirt.org/ovirt-engine
vi ~/.bashrc
sudo reboot
cd ovirt-engine/
make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1
cd ~/git/ovirt-imageio/
make
cd proxy/
make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
~/ovirt-engine/bin/engine-setup
~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
vi ~/.bashrc
vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
sudo poweroff
I don't know what's wrong. It does not work.
Look at the full half of the glass, you have engine.
Did you to add centos 7.7 host? 8.1?
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 3:15:15 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
> Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder why I
> haven't got this error sooner.
> Also, given the workaround, does that mean that ansible-lint is optional?
>
Yes, same as pep8, pyflake and other build check tools
>
> ----- Original Message -----
> From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Wednesday, March 18, 2020 2:21:14 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
>
>
> On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
>
> Ok, thanks for the reaction :)
>
> Getting back to the main topic, can anyone (please) try to compile the
> engine master now?
> That's what I get when I try to:
>
> [602] Don't compare to empty string
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
>
> when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
>
> [602] Don't compare to empty string
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
>
> when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
> hosted_engine_vm_cluster_name_result.stdout is undefined
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
>
> Task/Handler: Install collectd package
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
>
> Task/Handler: Install collectd plugins on engine
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
>
> Task/Handler: Install collectd plugins on hosts
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
>
> Task/Handler: Install collectd write_syslog plugin
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
>
> Task/Handler: Check if fluentd is running
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
>
> - fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
>
> changed_when: fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
>
> - fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
>
> when: fluentd_is_running|default(false)|bool == false
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
>
> Task/Handler: Check if rsyslog is running
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
>
> - rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
>
> changed_when: rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
>
> - rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
>
> when: rsyslog_is_running|default(false)|bool == false
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
>
> Task/Handler: Check if collectd is running
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
>
> Task/Handler: Install fluentd package
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
>
> Task/Handler: Install fluentd engine plugins
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
>
> Task/Handler: Install fluentd host plugins
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
>
> when: stat_result.stat.exists == True
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
>
> Task/Handler: Get ovirt_engine_fqdn
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
>
> Task/Handler: Get ovirt_engine_db_name
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
>
> Task/Handler: Get ovirt_engine_db_user
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
>
> Task/Handler: Get ovirt_engine_history_db_name
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
>
> Task/Handler: Get ovirt_engine_history_db_user
>
> make[1]: *** [Makefile:401: validations] Error 2
> make[1]: Leaving directory '/home/apple/git/ovirt-engine'
> make: *** [Makefile:584: all-dev] Error 2
>
> An extensive lecture from ansible, but what is this even about?
> https://bugzilla.redhat.com/show_bug.cgi?id=1804268
>
>
>
> ...
>
>
> ----- Original Message -----
> From: "Nir Soffer" < nsoffer(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana
Elfassy" <
> delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> Sent: Wednesday, March 18, 2020 11:45:28 AM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> > For the time being I'm doing super careful clean installation of both
> engine and host in hopes of getting dev env working again... results are
> yet to be seen.
> > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master
> rpm for Fedora 30. Correct name for the package is
> python3-ovirt-engine-sdk4. And more examples like that with random package
> renamings.
> >
> > README definitely needs an update. If you ask me, I would rather provide
> users with a single version (Fedora 30 only) of dev installation docs that
> works rather than with two versions that don't.
>
> Please do the update.
>
> Hopefully you will have more luck, my last README patch was abandoned
> after
> it was neglected by engine maintainers.
> https://gerrit.ovirt.org/c/106467/
>
> > Are there any reasons to keep CentOS 7 info there that's irrelevant now?
>
> It should be dropped now.
>
> > I can rework the docs for FC30 eventually if no one minds.
>
> There is already a working fedora 30 instructions in the bottom of the
> readme. It used to
> work when Amit added it.
>
> > Or, if plans are to move to CentOS 8, maybe another brave soul can do
> that.
> > Fedor
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org >
> > Sent: Tuesday, March 17, 2020 1:13:48 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
> >
> >
> >
> > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> >
> > I just tried installing on Fedora 30 host and error stays the same, so
> it's probably not as OS. Might try clean setup next, what else...
> >
> > Liran, do you see anything of interest when you journalctl -u
> ansible-runner-service | grep fatal ?
> > No, we do see a trackback on the command pointing out to
> python3.7/site-packages/runner_service/services/jobs.py
> > But, because breakpoint that only makes things slower, I think it's
> timing/locking issue somehow.
> >
> >
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana
Elfassy" <
> delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > Sent: Tuesday, March 17, 2020 12:49:32 PM
> > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
> >
> > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> > > I tried installing python 2 versions of some dependencies in addition
> to
> > > python 3 (as
> https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > > is not clear about it at all. on Fedora 30 default versions of these
> > > libraries you get when not specifying python vesion in the name are
> python
> > > 2.)
> > > Now error looks slightly different :'D
> > >
> > > 2020-03-17 11:08:27,294+01 ERROR
> > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
> server
> > > error, please check Ansible runner error log..
> > >
> > > Everything else stays the same, host install fails almost immediately.
> > > Does someone have any notes for Fedora 30 install they can share?
> > >
> > I start seeing it too:
> > ansible-runner-service-dev-1.0.1-1.fc30.noarch
> > python3-ansible-runner-1.3.4-2.fc30.noarch
> > engine:
> > http://pastebin.test.redhat.com/845373
> > of course no ansible log..
> > This is what journalctl show:
> > http://pastebin.test.redhat.com/845375
> >
> > After doing some debugging in the engine, after setting a breakpoint in
> > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
> Step-Over
> > until the execution (lines 139-147) it does work. Without breaking point
> > and making things slower it throws the error.
> >
> > >
> > > Thanks,
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > To: "Martin Perina" < mperina(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:52:47 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > > gunicorn-3, but when I check journalctl for ansible-runner-service I
> see
> > > the following:
> > >
> > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Starting gunicorn 19.9.0
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Using worker: sync
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2995]
> > > [INFO] Booting worker with pid: 2995
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2997]
> > > [INFO] Booting worker with pid: 2997
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > > options from /etc/ansible-runner-service/config.yaml
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
> to
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> from
> > > environment variables
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > overridden
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > > options from /etc/ansible-runner-service/config.yaml
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
> to
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> from
> > > environment variables
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > overridden
> > >
> > > Is that any suspicious? :)
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:36:40 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > >
> > >
> > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > >
> > >
> > > Nothing since there is no such service (or similarly named).
> > > Package python3-gunicorn is installed though.
> > >
> > > After you start ansible-runner-service service, you should see similar
> > > logs in journalctl:
> > >
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Starting gunicorn 19.9.0
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Using worker: sync
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1496] [INFO] Booting worker with pid: 1496
> > > And more if you execute some action from engine (like install new host
> or
> > > upgrade a host)
> > >
> > >
> > >
> > > So does that mean that something was supposed to register it as a
> service
> > > but did not?
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:13:03 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > >
> > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > >
> > > > FC30 dev env engine indeed :) I've done this before on other OS,
so
> > > unless
> > > > there is a blindspot somewhere in my eye it should be configured
> fine.
> > > >
> > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > > ● ansible-runner-service.service - Ansible Runner Service
> > > > Loaded: loaded
> (/usr/lib/systemd/system/ansible-runner-service.service;
> > > > enabled; vendor preset: disabled)
> > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min
> ago
> > > > Main PID: 909 (gunicorn-3)
> > > > Tasks: 9 (limit: 4915)
> > > > Memory: 193.4M
> > > > CGroup: /system.slice/ansible-runner-service.service
> > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > --private-key
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > --private-key
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > > StrictHostKeyChecking=no -o Port=22 -o
> > > >
> > >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>
> > >
> > > > -o KbdInteractiveAu>
> > > >
> > > > And the config:
> > > >
> > > > ---
> > > > version: 1
> > > >
> > > > # playbooks_root_dir
> > > > # location of the playbooks that the service will start
> > > > playbooks_root_dir:
> > > >
> > >
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>
> > >
> > > > # port
> > > > # tcp port for the service to listen to
> > > > port: 50001
> > > > #
> > > > # ip_address
> > > > # Specific IP address to bind to
> > > > # ip_address: '0.0.0.0'
> > > > target_user: root
> > > > #event_cache_size: 3
> > > > ssh_private_key:
> > > >
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > > >
> > > > /home/apple/ovirt-engine is where engine is dev-installed. Not sure
> what
> > > > else to check now...
> > > >
> > >
> > > Anything strange in journalctl for gunicorn-3 service?
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > package?
> > > >
> > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > > > wrote:
> > > >
> > > > > Actually, it was too early for me to celebrate.
> > > > >
> > > > > On Fedora 30, the engine compiles and runs fine, but when I try
> adding
> > > > the
> > > > > host installation fails almost immediately and I get the
following
> > > errors
> > > > > in the engine logs:
> > > > >
> > > > > ERROR
> [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
> installation
> > > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> > > Failed
> > > > to
> > > > > execute Ansible host-deploy role: Internal server error, please
> check
> > > > > Ansible runner error log.. Please check logs for more details:
> > > > >
> > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > > >
> > > > > There is nothing else. There is no file
> > > > >
> > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > > > Snapshot I'm using for the host is the same that worked just
fine
> when
> > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is that
an
> > > issue?
> > > > >
> > > >
> > > > As you mentioned building engine I assume you are using engine in
> dev
> > > env
> > > > on FC30, right? If so, have you manually configured
> > > ansible-runner-service
> > > > for dev env as mentioned in
> > > >
> > > >
> > >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > > ?
> > > >
> > > >
> > > > > Thanks,
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > > Subject: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > Hi,
> > > > >
> > > > > Resolved through installing engine on Fedora 30. From what I
> > > understand,
> > > > > CentOS 7 is not supported anymore.
> > > > >
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >,
"Dana Elfassy" <
> > > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org
>, "Eyal
> Shenitzky"
> > > <
> > > > > eshenitz(a)redhat.com >
> > > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > Hi Fedor,
> > > > >
> > > > > ansible-runner-service-dev package is available from
> > > > >
> > > > >
> > > >
> > >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > > repos which is included in ovirt-master-release package, which
> > > > > includes all repositories necessary for oVirt development:
> > > > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > >
> > > > > Was your issue resolved or not?
> > > > >
> > > > > Regards,
> > > > > Martin
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
> eshenitz(a)redhat.com
> > > >
> > > > > wrote:
> > > > >
> > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > > > >
> > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
> bzlotnik(a)redhat.com >
> > > > wrote:
> > > > > >
> > > > > >> ansible-runner was added in 4.4, you shouldn't need
in 4.3
> > > > > >>
> > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> > > fgavrilo(a)redhat.com >
> > > > > >> wrote:
> > > > > >> >
> > > > > >> > Hi Sandro,
> > > > > >> >
> > > > > >> > Thanks for the suggestion, but it seems to not
help much.
> > > > > >> >
> > > > > >> > ansible-runner-service-dev still can't be
found, I checked
> repos
> > > > that
> > > > > >> are installed from
> > > > > >>
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > >> and haven't found similarly names packages
either...
> > > > > >> >
> > > > > >> > $ sudo yum install ansible-runner-service-dev
> > > > > >> > Loaded plugins: fastestmirror
> > > > > >> > Repository centos-sclo-rh-release is listed more
than once in
> the
> > > > > >> configuration
> > > > > >> > Repository sac-gluster-ansible is listed more than
once in
> the
> > > > > >> configuration
> > > > > >> > Determining fastest mirrors
> > > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > > >>
> > > > > >> | 30 kB 00:00:00
> > > > > >> > ovirt-master-epel/x86_64/metalink
> > > > > >>
> > > > > >> | 30 kB 00:00:00
> > > > > >> > * base: ftp.sh.cvut.cz
> > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > > >> > * extras: ftp.sh.cvut.cz
> > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > > > >> > * updates: ftp.sh.cvut.cz
> > > > > >> > base
> > > > > >>
> > > > > >> | 3.6 kB 00:00:00
> > > > > >> > centos-opstools-release
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > centos-ovirt-common-testing
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-ovirt44-testing
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-qemu-ev-release
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-sclo-rh
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > centos-sclo-rh-release
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > centos-sclo-sclo
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > epel-apache-maven
> > > > > >>
> > > > > >> | 3.3 kB 00:00:00
> > > > > >> > extras
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-gluster6
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-opstools
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-ovirt43
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-qemu-ev
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-epel
> > > > > >>
> > > > > >> | 5.3 kB 00:00:00
> > > > > >> > ovirt-4.3-snapshot
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-4.3-snapshot-static
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-4.3-virtio-win-latest
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-centos-gluster6
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-master-centos-opstools-testing
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-master-epel
> > > > > >>
> > > > > >> | 5.3 kB 00:00:00
> > > > > >> > ovirt-master-snapshot
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-snapshot-static
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-virtio-win-latest
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > sac-gluster-ansible
> > > > > >>
> > > > > >> | 3.3 kB 00:00:00
> > > > > >> > updates
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > (1/32): base/7/x86_64/group_gz
> > > > > >>
> > > > > >> | 165 kB 00:00:00
> > > > > >> > (2/32): base/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.0 MB 00:00:00
> > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > > >>
> > > > > >> | 4.2 MB 00:00:00
> > > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 9.3 kB 00:00:00
> > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > > >>
> > > > > >> | 344 kB 00:00:00
> > > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 1.1 kB 00:00:01
> > > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 164 kB 00:00:00
> > > > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 429 kB 00:00:01
> > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 101 kB 00:00:01
> > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > > >>
> > > > > >> | 116 kB 00:00:00
> > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > > >>
> > > > > >> | 73 kB 00:00:00
> > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > > >>
> > > > > >> | 90 kB 00:00:00
> > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > > >>
> > > > > >> | 5.0 kB 00:00:01
> > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > > >>
> > > > > >> | 1.0 MB 00:00:00
> > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > > >>
> > > > > >> | 429 kB 00:00:00
> > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > > >>
> > > > > >> | 211 kB 00:00:00
> > > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > > >>
> > > > > >> | 109 kB 00:00:00
> > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > > >>
> > > > > >> | 116 kB 00:00:00
> > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > > >>
> > > > > >> | 90 kB 00:00:00
> > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > > >>
> > > > > >> | 1.0 MB 00:00:00
> > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > > >>
> > > > > >> | 54 kB 00:00:00
> > > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > > > >>
> > > > > >> | 7.6 kB 00:00:01
> > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
> > > > > >>
> > > > > >> | 4.6 kB 00:00:00
> > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
> > > > > >>
> > > > > >> | 7.6 kB 00:00:00
> > > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 4.2 MB 00:00:03
> > > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (30/32):
> ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 611 kB 00:00:01
> > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > > >>
> > > > > >> | 2.3 kB 00:00:00
> > > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > > > >>
> > > > > >> | 13 kB 00:00:00
> > > > > >> > No package ansible-runner-service-dev available.
> > > > > >> > Error: Nothing to do
> > > > > >> >
> > > > > >> >
> > > > > >> > Fedor
> > > > > >> >
> > > > > >> > ----- Original Message -----
> > > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
> > > > devel(a)ovirt.org >
> > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > > > >> ansible-runner-service-dev package?
> > > > > >> >
> > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor
Gavrilov <
> > > > > >> fgavrilo(a)redhat.com >
> > > > > >> > ha scritto:
> > > > > >> >
> > > > > >> > > Thanks for the response, Eyal!
> > > > > >> > >
> > > > > >> > > I already had ovirt-master repo installed,
but updated
> > > everything
> > > > > >> just in
> > > > > >> > > case.
> > > > > >> > > I even tried both yum and dnf (since yum on
centos was
> giving
> > > me
> > > > > lots
> > > > > >> of
> > > > > >> > > grief before and I learned their behaviour
differs,
> especially
> > > > when
> > > > > it
> > > > > >> > > comes to bugs) but none works...
> > > > > >> > >
> > > > > >> > > >No package ansible-runner-service-dev
available.
> > > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > > >> > >
> > > > > >> > > Fedor
> > > > > >> > >
> > > > > >> > >
> > > > > >> > Looks like you're trying to install
ovirt-master-snapshot on
> el7.
> > > > > >> > It won't work.
> > > > > >> > Master is not supporting el7 anymore.
> > > > > >> > You can use 4.3 snapshot rpm at :
> > > > > >> >
> > > >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > >> if
> > > > > >> > you need to stay on el7.
> > > > > >> >
> > > > > >> >
> > > > > >> > > ----- Original Message -----
> > > > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > >> > > Cc: "devel" < devel(a)ovirt.org
>
> > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > > > >> > > Subject: Re: [ovirt-devel] what's up
with
> > > > ansible-runner-service-dev
> > > > > >> > > package?
> > > > > >> > >
> > > > > >> > > Hi Fedor,
> > > > > >> > >
> > > > > >> > > Please try:
> > > > > >> > > 1. dnf install
> > > > > >> > >
> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > >> > > 2. dnf update
> > > > > >> > > 3. dnf install ansible-runner-service-dev
> > > > > >> > > 4. flow the instruction from thread 'New
dependency for
> > > > development
> > > > > >> > > environment'
> > > > > >> > > The
> > > > > >> > >
> > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov
<
> > > fgavrilo(a)redhat.com
> > > > >
> > > > > >> wrote:
> > > > > >> > >
> > > > > >> > > > Hi everyone,
> > > > > >> > > >
> > > > > >> > > > After I screwed up my dev environment
beyond repair I
> have to
> > > > set
> > > > > >> it up
> > > > > >> > > > again and I see something I haven't
last time (CentOS 7):
> > > > > >> > > >
> > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > > >> > > > Loaded plugins: fastestmirror
> > > > > >> > > > Loading mirror speeds from cached
hostfile
> > > > > >> > > > * base: mirror.hosting90.cz
> > > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > > >> > > > * extras: mirror.hosting90.cz
> > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
> > > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > > >> > > > * ovirt-master-snapshot-static:
ftp.nluug.nl
> > > > > >> > > > * updates: mirror.hosting90.cz
> > > > > >> > > > No package ansible-runner-service-dev
available.
> > > > > >> > > >
> > > > > >> > > > Maybe something's missing from my
notes, but where did it
> go?
> > > > > >> Should I
> > > > > >> > > add
> > > > > >> > > > some repo?
> > > > > >> > > >
> > > > > >> > > > Fedor
> > > > > >> > > >
_______________________________________________
> > > > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > > > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > >> > > > oVirt Code of Conduct:
> > > > > >> > > >
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > > > List Archives:
> > > > > >> > > >
> > > > > >> > >
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > > >> > > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> > > --
> > > > > >> > > Regards,
> > > > > >> > > Eyal Shenitzky
> > > > > >> > >
_______________________________________________
> > > > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > >> > > oVirt Code of Conduct:
> > > > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > > List Archives:
> > > > > >> > >
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > > >> > >
> > > > > >> >
> > > > > >> >
> > > > > >> > --
> > > > > >> >
> > > > > >> > Sandro Bonazzola
> > > > > >> >
> > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > > > >> >
> > > > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > > > >> >
> > > > > >> > sbonazzo(a)redhat.com
> > > > > >> > < https://www.redhat.com/ >*Red Hat respects
your work life
> > > balance.
> > > > > >> > Therefore there is no need to answer this email
out of your
> > > office
> > > > > >> hours.
> > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578
>*
> > > > > >> > _______________________________________________
> > > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > >> > oVirt Code of Conduct:
> > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > List Archives:
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > > >> _______________________________________________
> > > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > >> oVirt Code of Conduct:
> > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> List Archives:
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > > >>
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Regards,
> > > > > > Eyal Shenitzky
> > > > > > _______________________________________________
> > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > oVirt Code of Conduct:
> > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > List Archives:
> > > > > >
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > > >
> > > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> > >
> >
> >
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
>
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
6:20 p.m.
New subject: what's up with ansible-runner-service-dev package?
Thanks for the response, Nir.
You host installed without SSH server enabled?
I've been
virtualizing both engine and host vm since I joined the team, so enabling ssh access is
the first thing I do after OS is installed.
Not sure why you need cockpit.
But you need:
sudo dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
I did install ovirt-release-master rpm on the host and somehow managed to not copy that
(facepalm). But believe me it's there.
Regarding cockpit, I was following what's written in
https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts...
Why not:
sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it would silently
fail when you try installing from the URL :D
Did you to add centos 7.7 host? 8.1?
Yesterday I tried Fedoa 30
host and just now I tried CentOS 8 host (that's the lengths I went to get this thing
working!). Both fail.
Look at the full half of the glass, you have engine.
Nice one.
Though I'm afraid that part might be poisoned since host configuration that worked for
me for a year now instantly fails no matter what OS is used...
Fedor
----- Original Message -----
From: "Nir Soffer" <nsoffer(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, "Liran Rotenberg"
<lrotenbe(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <devel(a)ovirt.org>
Sent: Thursday, March 19, 2020 2:31:39 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Wow. I did not expect that, but after clean setup the error is still there.
I can't add fedora 30 host to fedora 30 engine.
Here is a full bash history for the host machine since OS was installed:
sudo yum update
Good
sudo systemctl enable sshd
You host installed without SSH server enabled?
sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
sudo nmcli connection mod ens3 ipv4.method manual
You can configure the network from the installer, less painful.
sudo vi /etc/hosts
sudo poweroff
sudo yum install cockpit-ovirt-dashboard
sudo systemctl enable cockpit.socket --now
Not sure why you need cockpit.
But you need:
sudo dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Same for the engine machine (I was installing dependencies separetely because 1. yum
bugs & 2. I was checking if versions are correct one by one):
>
> sudo yum update
sudo systemctl enable sshd
> sudo nmcli connection mod ens3
ipv4.addresses 192.168.111.2/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual
> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install java-11-openjdk-devel
> sudo yum install java-1.8.0-openjdk-headless
> sudo yum install mailcap
> sudo yum install unzip
> sudo yum install openssl
> sudo yum install bind-utils
> sudo yum install postgresql-server
> sudo yum install postgresql
> sudo yum install postgresql-contrib
> sudo yum install python2-dateutil
> sudo yum install python3-dateutil
> sudo yum install python2-m2crypto
> sudo yum install python3-m2crypto
> sudo yum install python2-psycopg2
> sudo yum install python3-psycopg2
> sudo yum install python2-jinja2
> sudo yum install python3-jinja2
> sudo yum install python2-libxml2
> sudo yum install python3-libxml2
> sudo yum install python2-daemon
> sudo yum install python3-daemon
wget
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
sudo yum install ./ovirt-release-master.rpm -y
Why not:
sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Also, you want to instal this first - before you install other
packages, so you get packages
from ovirt dependencies.
sudo yum install otopi
sudo yum install python3-ovirt-setup-lib
sudo yum install maven
sudo yum install ansible
sudo yum install ansible-runner-service-dev
sudo yum install ovirt-ansible-roles
sudo yum install ovirt-engine-metrics
sudo yum install python3-ovirt-engine-sdk4
sudo yum install pyflakes
sudo yum install python-pep8
sudo yum install python3-docker
sudo yum install python3-isort
sudo yum install gcc
sudo yum install python2-devel
sudo yum install systemd-python
sudo yum install python-webob
sudo yum install redhat-rpm-config
sudo yum install scl-utils
sudo yum install ovirt-imageio-common
Not needed, the ovirt-imageio-proxy will bring it.
sudo yum install make
sudo yum install python-requests
sudo yum install python-subprocess32
sudo alternatives --config java
sudo yum install ovirt-engine-wildfly
sudo yum install ovirt-engine-wildfly-overlay
sudo vi /etc/security/limits.d/10-nofile.conf
sudo firewall-cmd --add-port=8080/tcp --permanent
sudo firewall-cmd --add-port=8443/tcp --permanent
sudo firewall-cmd --add-port=8787/tcp --permanent
sudo firewall-cmd --add-port=5432/tcp --permanent
sudo firewall-cmd --add-port=54323/tcp --permanent
sudo firewall-cmd --reload
sudo postgresql-setup --initdb --unit postgresql
sudo vi /var/lib/pgsql/data/pg_hba.conf
sudo vi /var/lib/pgsql/data/postgresql.conf
sudo systemctl enable postgresql --now
sudo systemctl status postgresql
sudo su - postgres -c "psql -d template1"
sudo su - postgres -c "psql -d engine"
sudo -u postgres -i ?
sudo vi /etc/ansible-runner-service/config.yaml
sudo systemctl enable ansible-runner-service --now
sudo systemctl status ansible-runner-service
sudo yum install git
mkdir ~/git && cd ~/git
git clone git://gerrit.ovirt.org/ovirt-imageio
git clone git://gerrit.ovirt.org/ovirt-engine
vi ~/.bashrc
sudo reboot
cd ovirt-engine/
make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1
cd ~/git/ovirt-imageio/
make
cd proxy/
make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
~/ovirt-engine/bin/engine-setup
~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
vi ~/.bashrc
vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
sudo poweroff
I don't know what's wrong. It does not work.
Look at the full half of the glass, you have engine.
Did you to add centos 7.7 host? 8.1?
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 3:15:15 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
> Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder why I
> haven't got this error sooner.
> Also, given the workaround, does that mean that ansible-lint is optional?
>
Yes, same as pep8, pyflake and other build check tools
>
> ----- Original Message -----
> From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Wednesday, March 18, 2020 2:21:14 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
>
>
> On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
>
> Ok, thanks for the reaction :)
>
> Getting back to the main topic, can anyone (please) try to compile the
> engine master now?
> That's what I get when I try to:
>
> [602] Don't compare to empty string
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
>
> when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
>
> [602] Don't compare to empty string
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
>
> when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
> hosted_engine_vm_cluster_name_result.stdout is undefined
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
>
> Task/Handler: Install collectd package
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
>
> Task/Handler: Install collectd plugins on engine
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
>
> Task/Handler: Install collectd plugins on hosts
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
>
> Task/Handler: Install collectd write_syslog plugin
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
>
> Task/Handler: Check if fluentd is running
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
>
> - fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
>
> changed_when: fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
>
> - fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
>
> when: fluentd_is_running|default(false)|bool == false
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
>
> Task/Handler: Check if rsyslog is running
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
>
> - rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
>
> changed_when: rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
>
> - rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
>
> when: rsyslog_is_running|default(false)|bool == false
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
>
> Task/Handler: Check if collectd is running
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
>
> Task/Handler: Install fluentd package
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
>
> Task/Handler: Install fluentd engine plugins
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
>
> Task/Handler: Install fluentd host plugins
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
>
> when: stat_result.stat.exists == True
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
>
> Task/Handler: Get ovirt_engine_fqdn
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
>
> Task/Handler: Get ovirt_engine_db_name
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
>
> Task/Handler: Get ovirt_engine_db_user
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
>
> Task/Handler: Get ovirt_engine_history_db_name
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
>
> Task/Handler: Get ovirt_engine_history_db_user
>
> make[1]: *** [Makefile:401: validations] Error 2
> make[1]: Leaving directory '/home/apple/git/ovirt-engine'
> make: *** [Makefile:584: all-dev] Error 2
>
> An extensive lecture from ansible, but what is this even about?
> https://bugzilla.redhat.com/show_bug.cgi?id=1804268
>
>
>
> ...
>
>
> ----- Original Message -----
> From: "Nir Soffer" < nsoffer(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana
Elfassy" <
> delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> Sent: Wednesday, March 18, 2020 11:45:28 AM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> > For the time being I'm doing super careful clean installation of both
> engine and host in hopes of getting dev env working again... results are
> yet to be seen.
> > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master
> rpm for Fedora 30. Correct name for the package is
> python3-ovirt-engine-sdk4. And more examples like that with random package
> renamings.
> >
> > README definitely needs an update. If you ask me, I would rather provide
> users with a single version (Fedora 30 only) of dev installation docs that
> works rather than with two versions that don't.
>
> Please do the update.
>
> Hopefully you will have more luck, my last README patch was abandoned
> after
> it was neglected by engine maintainers.
> https://gerrit.ovirt.org/c/106467/
>
> > Are there any reasons to keep CentOS 7 info there that's irrelevant now?
>
> It should be dropped now.
>
> > I can rework the docs for FC30 eventually if no one minds.
>
> There is already a working fedora 30 instructions in the bottom of the
> readme. It used to
> work when Amit added it.
>
> > Or, if plans are to move to CentOS 8, maybe another brave soul can do
> that.
> > Fedor
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org >
> > Sent: Tuesday, March 17, 2020 1:13:48 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
> >
> >
> >
> > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> >
> > I just tried installing on Fedora 30 host and error stays the same, so
> it's probably not as OS. Might try clean setup next, what else...
> >
> > Liran, do you see anything of interest when you journalctl -u
> ansible-runner-service | grep fatal ?
> > No, we do see a trackback on the command pointing out to
> python3.7/site-packages/runner_service/services/jobs.py
> > But, because breakpoint that only makes things slower, I think it's
> timing/locking issue somehow.
> >
> >
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana
Elfassy" <
> delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > Sent: Tuesday, March 17, 2020 12:49:32 PM
> > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
> >
> > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> > > I tried installing python 2 versions of some dependencies in addition
> to
> > > python 3 (as
> https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > > is not clear about it at all. on Fedora 30 default versions of these
> > > libraries you get when not specifying python vesion in the name are
> python
> > > 2.)
> > > Now error looks slightly different :'D
> > >
> > > 2020-03-17 11:08:27,294+01 ERROR
> > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
> server
> > > error, please check Ansible runner error log..
> > >
> > > Everything else stays the same, host install fails almost immediately.
> > > Does someone have any notes for Fedora 30 install they can share?
> > >
> > I start seeing it too:
> > ansible-runner-service-dev-1.0.1-1.fc30.noarch
> > python3-ansible-runner-1.3.4-2.fc30.noarch
> > engine:
> > http://pastebin.test.redhat.com/845373
> > of course no ansible log..
> > This is what journalctl show:
> > http://pastebin.test.redhat.com/845375
> >
> > After doing some debugging in the engine, after setting a breakpoint in
> > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
> Step-Over
> > until the execution (lines 139-147) it does work. Without breaking point
> > and making things slower it throws the error.
> >
> > >
> > > Thanks,
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > To: "Martin Perina" < mperina(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:52:47 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > > gunicorn-3, but when I check journalctl for ansible-runner-service I
> see
> > > the following:
> > >
> > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Starting gunicorn 19.9.0
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Using worker: sync
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2995]
> > > [INFO] Booting worker with pid: 2995
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2997]
> > > [INFO] Booting worker with pid: 2997
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > > options from /etc/ansible-runner-service/config.yaml
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
> to
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> from
> > > environment variables
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > overridden
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > > options from /etc/ansible-runner-service/config.yaml
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
> to
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> from
> > > environment variables
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > overridden
> > >
> > > Is that any suspicious? :)
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:36:40 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > >
> > >
> > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > >
> > >
> > > Nothing since there is no such service (or similarly named).
> > > Package python3-gunicorn is installed though.
> > >
> > > After you start ansible-runner-service service, you should see similar
> > > logs in journalctl:
> > >
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Starting gunicorn 19.9.0
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Using worker: sync
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1496] [INFO] Booting worker with pid: 1496
> > > And more if you execute some action from engine (like install new host
> or
> > > upgrade a host)
> > >
> > >
> > >
> > > So does that mean that something was supposed to register it as a
> service
> > > but did not?
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:13:03 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > >
> > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > >
> > > > FC30 dev env engine indeed :) I've done this before on other OS,
so
> > > unless
> > > > there is a blindspot somewhere in my eye it should be configured
> fine.
> > > >
> > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > > ● ansible-runner-service.service - Ansible Runner Service
> > > > Loaded: loaded
> (/usr/lib/systemd/system/ansible-runner-service.service;
> > > > enabled; vendor preset: disabled)
> > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min
> ago
> > > > Main PID: 909 (gunicorn-3)
> > > > Tasks: 9 (limit: 4915)
> > > > Memory: 193.4M
> > > > CGroup: /system.slice/ansible-runner-service.service
> > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > --private-key
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > --private-key
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > > StrictHostKeyChecking=no -o Port=22 -o
> > > >
> > >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>
> > >
> > > > -o KbdInteractiveAu>
> > > >
> > > > And the config:
> > > >
> > > > ---
> > > > version: 1
> > > >
> > > > # playbooks_root_dir
> > > > # location of the playbooks that the service will start
> > > > playbooks_root_dir:
> > > >
> > >
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>
> > >
> > > > # port
> > > > # tcp port for the service to listen to
> > > > port: 50001
> > > > #
> > > > # ip_address
> > > > # Specific IP address to bind to
> > > > # ip_address: '0.0.0.0'
> > > > target_user: root
> > > > #event_cache_size: 3
> > > > ssh_private_key:
> > > >
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > > >
> > > > /home/apple/ovirt-engine is where engine is dev-installed. Not sure
> what
> > > > else to check now...
> > > >
> > >
> > > Anything strange in journalctl for gunicorn-3 service?
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > package?
> > > >
> > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > > > wrote:
> > > >
> > > > > Actually, it was too early for me to celebrate.
> > > > >
> > > > > On Fedora 30, the engine compiles and runs fine, but when I try
> adding
> > > > the
> > > > > host installation fails almost immediately and I get the
following
> > > errors
> > > > > in the engine logs:
> > > > >
> > > > > ERROR
> [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
> installation
> > > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> > > Failed
> > > > to
> > > > > execute Ansible host-deploy role: Internal server error, please
> check
> > > > > Ansible runner error log.. Please check logs for more details:
> > > > >
> > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > > >
> > > > > There is nothing else. There is no file
> > > > >
> > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > > > Snapshot I'm using for the host is the same that worked just
fine
> when
> > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is that
an
> > > issue?
> > > > >
> > > >
> > > > As you mentioned building engine I assume you are using engine in
> dev
> > > env
> > > > on FC30, right? If so, have you manually configured
> > > ansible-runner-service
> > > > for dev env as mentioned in
> > > >
> > > >
> > >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > > ?
> > > >
> > > >
> > > > > Thanks,
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > > Subject: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > Hi,
> > > > >
> > > > > Resolved through installing engine on Fedora 30. From what I
> > > understand,
> > > > > CentOS 7 is not supported anymore.
> > > > >
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >,
"Dana Elfassy" <
> > > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org
>, "Eyal
> Shenitzky"
> > > <
> > > > > eshenitz(a)redhat.com >
> > > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > Hi Fedor,
> > > > >
> > > > > ansible-runner-service-dev package is available from
> > > > >
> > > > >
> > > >
> > >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > > repos which is included in ovirt-master-release package, which
> > > > > includes all repositories necessary for oVirt development:
> > > > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > >
> > > > > Was your issue resolved or not?
> > > > >
> > > > > Regards,
> > > > > Martin
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
> eshenitz(a)redhat.com
> > > >
> > > > > wrote:
> > > > >
> > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > > > >
> > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
> bzlotnik(a)redhat.com >
> > > > wrote:
> > > > > >
> > > > > >> ansible-runner was added in 4.4, you shouldn't need
in 4.3
> > > > > >>
> > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> > > fgavrilo(a)redhat.com >
> > > > > >> wrote:
> > > > > >> >
> > > > > >> > Hi Sandro,
> > > > > >> >
> > > > > >> > Thanks for the suggestion, but it seems to not
help much.
> > > > > >> >
> > > > > >> > ansible-runner-service-dev still can't be
found, I checked
> repos
> > > > that
> > > > > >> are installed from
> > > > > >>
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > >> and haven't found similarly names packages
either...
> > > > > >> >
> > > > > >> > $ sudo yum install ansible-runner-service-dev
> > > > > >> > Loaded plugins: fastestmirror
> > > > > >> > Repository centos-sclo-rh-release is listed more
than once in
> the
> > > > > >> configuration
> > > > > >> > Repository sac-gluster-ansible is listed more than
once in
> the
> > > > > >> configuration
> > > > > >> > Determining fastest mirrors
> > > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > > >>
> > > > > >> | 30 kB 00:00:00
> > > > > >> > ovirt-master-epel/x86_64/metalink
> > > > > >>
> > > > > >> | 30 kB 00:00:00
> > > > > >> > * base: ftp.sh.cvut.cz
> > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > > >> > * extras: ftp.sh.cvut.cz
> > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > > > >> > * updates: ftp.sh.cvut.cz
> > > > > >> > base
> > > > > >>
> > > > > >> | 3.6 kB 00:00:00
> > > > > >> > centos-opstools-release
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > centos-ovirt-common-testing
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-ovirt44-testing
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-qemu-ev-release
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-sclo-rh
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > centos-sclo-rh-release
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > centos-sclo-sclo
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > epel-apache-maven
> > > > > >>
> > > > > >> | 3.3 kB 00:00:00
> > > > > >> > extras
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-gluster6
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-opstools
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-ovirt43
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-qemu-ev
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-epel
> > > > > >>
> > > > > >> | 5.3 kB 00:00:00
> > > > > >> > ovirt-4.3-snapshot
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-4.3-snapshot-static
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-4.3-virtio-win-latest
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-centos-gluster6
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-master-centos-opstools-testing
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-master-epel
> > > > > >>
> > > > > >> | 5.3 kB 00:00:00
> > > > > >> > ovirt-master-snapshot
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-snapshot-static
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-virtio-win-latest
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > sac-gluster-ansible
> > > > > >>
> > > > > >> | 3.3 kB 00:00:00
> > > > > >> > updates
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > (1/32): base/7/x86_64/group_gz
> > > > > >>
> > > > > >> | 165 kB 00:00:00
> > > > > >> > (2/32): base/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.0 MB 00:00:00
> > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > > >>
> > > > > >> | 4.2 MB 00:00:00
> > > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 9.3 kB 00:00:00
> > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > > >>
> > > > > >> | 344 kB 00:00:00
> > > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 1.1 kB 00:00:01
> > > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 164 kB 00:00:00
> > > > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 429 kB 00:00:01
> > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 101 kB 00:00:01
> > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > > >>
> > > > > >> | 116 kB 00:00:00
> > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > > >>
> > > > > >> | 73 kB 00:00:00
> > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > > >>
> > > > > >> | 90 kB 00:00:00
> > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > > >>
> > > > > >> | 5.0 kB 00:00:01
> > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > > >>
> > > > > >> | 1.0 MB 00:00:00
> > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > > >>
> > > > > >> | 429 kB 00:00:00
> > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > > >>
> > > > > >> | 211 kB 00:00:00
> > > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > > >>
> > > > > >> | 109 kB 00:00:00
> > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > > >>
> > > > > >> | 116 kB 00:00:00
> > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > > >>
> > > > > >> | 90 kB 00:00:00
> > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > > >>
> > > > > >> | 1.0 MB 00:00:00
> > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > > >>
> > > > > >> | 54 kB 00:00:00
> > > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > > > >>
> > > > > >> | 7.6 kB 00:00:01
> > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
> > > > > >>
> > > > > >> | 4.6 kB 00:00:00
> > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
> > > > > >>
> > > > > >> | 7.6 kB 00:00:00
> > > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 4.2 MB 00:00:03
> > > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (30/32):
> ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 611 kB 00:00:01
> > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > > >>
> > > > > >> | 2.3 kB 00:00:00
> > > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > > > >>
> > > > > >> | 13 kB 00:00:00
> > > > > >> > No package ansible-runner-service-dev available.
> > > > > >> > Error: Nothing to do
> > > > > >> >
> > > > > >> >
> > > > > >> > Fedor
> > > > > >> >
> > > > > >> > ----- Original Message -----
> > > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
> > > > devel(a)ovirt.org >
> > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > > > >> ansible-runner-service-dev package?
> > > > > >> >
> > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor
Gavrilov <
> > > > > >> fgavrilo(a)redhat.com >
> > > > > >> > ha scritto:
> > > > > >> >
> > > > > >> > > Thanks for the response, Eyal!
> > > > > >> > >
> > > > > >> > > I already had ovirt-master repo installed,
but updated
> > > everything
> > > > > >> just in
> > > > > >> > > case.
> > > > > >> > > I even tried both yum and dnf (since yum on
centos was
> giving
> > > me
> > > > > lots
> > > > > >> of
> > > > > >> > > grief before and I learned their behaviour
differs,
> especially
> > > > when
> > > > > it
> > > > > >> > > comes to bugs) but none works...
> > > > > >> > >
> > > > > >> > > >No package ansible-runner-service-dev
available.
> > > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > > >> > >
> > > > > >> > > Fedor
> > > > > >> > >
> > > > > >> > >
> > > > > >> > Looks like you're trying to install
ovirt-master-snapshot on
> el7.
> > > > > >> > It won't work.
> > > > > >> > Master is not supporting el7 anymore.
> > > > > >> > You can use 4.3 snapshot rpm at :
> > > > > >> >
> > > >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > >> if
> > > > > >> > you need to stay on el7.
> > > > > >> >
> > > > > >> >
> > > > > >> > > ----- Original Message -----
> > > > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > >> > > Cc: "devel" < devel(a)ovirt.org
>
> > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > > > >> > > Subject: Re: [ovirt-devel] what's up
with
> > > > ansible-runner-service-dev
> > > > > >> > > package?
> > > > > >> > >
> > > > > >> > > Hi Fedor,
> > > > > >> > >
> > > > > >> > > Please try:
> > > > > >> > > 1. dnf install
> > > > > >> > >
> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > >> > > 2. dnf update
> > > > > >> > > 3. dnf install ansible-runner-service-dev
> > > > > >> > > 4. flow the instruction from thread 'New
dependency for
> > > > development
> > > > > >> > > environment'
> > > > > >> > > The
> > > > > >> > >
> > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov
<
> > > fgavrilo(a)redhat.com
> > > > >
> > > > > >> wrote:
> > > > > >> > >
> > > > > >> > > > Hi everyone,
> > > > > >> > > >
> > > > > >> > > > After I screwed up my dev environment
beyond repair I
> have to
> > > > set
> > > > > >> it up
> > > > > >> > > > again and I see something I haven't
last time (CentOS 7):
> > > > > >> > > >
> > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > > >> > > > Loaded plugins: fastestmirror
> > > > > >> > > > Loading mirror speeds from cached
hostfile
> > > > > >> > > > * base: mirror.hosting90.cz
> > > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > > >> > > > * extras: mirror.hosting90.cz
> > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
> > > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > > >> > > > * ovirt-master-snapshot-static:
ftp.nluug.nl
> > > > > >> > > > * updates: mirror.hosting90.cz
> > > > > >> > > > No package ansible-runner-service-dev
available.
> > > > > >> > > >
> > > > > >> > > > Maybe something's missing from my
notes, but where did it
> go?
> > > > > >> Should I
> > > > > >> > > add
> > > > > >> > > > some repo?
> > > > > >> > > >
> > > > > >> > > > Fedor
> > > > > >> > > >
_______________________________________________
> > > > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > > > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > >> > > > oVirt Code of Conduct:
> > > > > >> > > >
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > > > List Archives:
> > > > > >> > > >
> > > > > >> > >
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > > >> > > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> > > --
> > > > > >> > > Regards,
> > > > > >> > > Eyal Shenitzky
> > > > > >> > >
_______________________________________________
> > > > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > >> > > oVirt Code of Conduct:
> > > > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > > List Archives:
> > > > > >> > >
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > > >> > >
> > > > > >> >
> > > > > >> >
> > > > > >> > --
> > > > > >> >
> > > > > >> > Sandro Bonazzola
> > > > > >> >
> > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > > > >> >
> > > > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > > > >> >
> > > > > >> > sbonazzo(a)redhat.com
> > > > > >> > < https://www.redhat.com/ >*Red Hat respects
your work life
> > > balance.
> > > > > >> > Therefore there is no need to answer this email
out of your
> > > office
> > > > > >> hours.
> > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578
>*
> > > > > >> > _______________________________________________
> > > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > >> > oVirt Code of Conduct:
> > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > List Archives:
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > > >> _______________________________________________
> > > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > >> oVirt Code of Conduct:
> > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> List Archives:
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > > >>
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Regards,
> > > > > > Eyal Shenitzky
> > > > > > _______________________________________________
> > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > oVirt Code of Conduct:
> > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > List Archives:
> > > > > >
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > > >
> > > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> > >
> >
> >
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
>
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
4:04 p.m.
New subject: what's up with ansible-runner-service-dev package?
I just tried installing fedora 30 host with no pre-installed cockpit, just
ovirt-release-master repo. Same as always:
2020-03-20 14:01:30,134+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID: VDS_INSTALL_FAILED(505),
Host banana installation failed. Failed to execute Ansible host-deploy role: Internal
server error, please check Ansible runner error log.. Please check logs for more details:
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.
No logs as usual. The error must be on the engine side somewhere...
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Nir Soffer" <nsoffer(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Thursday, March 19, 2020 4:20:23 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
Thanks for the response, Nir.
You host installed without SSH server enabled?
I've been
virtualizing both engine and host vm since I joined the team, so enabling ssh access is
the first thing I do after OS is installed.
Not sure why you need cockpit.
But you need:
sudo dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
I did install ovirt-release-master rpm on the host and somehow managed to not copy that
(facepalm). But believe me it's there.
Regarding cockpit, I was following what's written in
https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts...
Why not:
sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it would silently
fail when you try installing from the URL :D
Did you to add centos 7.7 host? 8.1?
Yesterday I tried Fedoa 30
host and just now I tried CentOS 8 host (that's the lengths I went to get this thing
working!). Both fail.
Look at the full half of the glass, you have engine.
Nice one.
Though I'm afraid that part might be poisoned since host configuration that worked for
me for a year now instantly fails no matter what OS is used...
Fedor
----- Original Message -----
From: "Nir Soffer" <nsoffer(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, "Liran Rotenberg"
<lrotenbe(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <devel(a)ovirt.org>
Sent: Thursday, March 19, 2020 2:31:39 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Wow. I did not expect that, but after clean setup the error is still there.
I can't add fedora 30 host to fedora 30 engine.
Here is a full bash history for the host machine since OS was installed:
sudo yum update
Good
sudo systemctl enable sshd
You host installed without SSH server enabled?
sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
sudo nmcli connection mod ens3 ipv4.method manual
You can configure the network from the installer, less painful.
sudo vi /etc/hosts
sudo poweroff
sudo yum install cockpit-ovirt-dashboard
sudo systemctl enable cockpit.socket --now
Not sure why you need cockpit.
But you need:
sudo dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Same for the engine machine (I was installing dependencies separetely because 1. yum
bugs & 2. I was checking if versions are correct one by one):
>
> sudo yum update
sudo systemctl enable sshd
> sudo nmcli connection mod ens3
ipv4.addresses 192.168.111.2/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual
> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install java-11-openjdk-devel
> sudo yum install java-1.8.0-openjdk-headless
> sudo yum install mailcap
> sudo yum install unzip
> sudo yum install openssl
> sudo yum install bind-utils
> sudo yum install postgresql-server
> sudo yum install postgresql
> sudo yum install postgresql-contrib
> sudo yum install python2-dateutil
> sudo yum install python3-dateutil
> sudo yum install python2-m2crypto
> sudo yum install python3-m2crypto
> sudo yum install python2-psycopg2
> sudo yum install python3-psycopg2
> sudo yum install python2-jinja2
> sudo yum install python3-jinja2
> sudo yum install python2-libxml2
> sudo yum install python3-libxml2
> sudo yum install python2-daemon
> sudo yum install python3-daemon
wget
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
sudo yum install ./ovirt-release-master.rpm -y
Why not:
sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Also, you want to instal this first - before you install other
packages, so you get packages
from ovirt dependencies.
sudo yum install otopi
sudo yum install python3-ovirt-setup-lib
sudo yum install maven
sudo yum install ansible
sudo yum install ansible-runner-service-dev
sudo yum install ovirt-ansible-roles
sudo yum install ovirt-engine-metrics
sudo yum install python3-ovirt-engine-sdk4
sudo yum install pyflakes
sudo yum install python-pep8
sudo yum install python3-docker
sudo yum install python3-isort
sudo yum install gcc
sudo yum install python2-devel
sudo yum install systemd-python
sudo yum install python-webob
sudo yum install redhat-rpm-config
sudo yum install scl-utils
sudo yum install ovirt-imageio-common
Not needed, the ovirt-imageio-proxy will bring it.
sudo yum install make
sudo yum install python-requests
sudo yum install python-subprocess32
sudo alternatives --config java
sudo yum install ovirt-engine-wildfly
sudo yum install ovirt-engine-wildfly-overlay
sudo vi /etc/security/limits.d/10-nofile.conf
sudo firewall-cmd --add-port=8080/tcp --permanent
sudo firewall-cmd --add-port=8443/tcp --permanent
sudo firewall-cmd --add-port=8787/tcp --permanent
sudo firewall-cmd --add-port=5432/tcp --permanent
sudo firewall-cmd --add-port=54323/tcp --permanent
sudo firewall-cmd --reload
sudo postgresql-setup --initdb --unit postgresql
sudo vi /var/lib/pgsql/data/pg_hba.conf
sudo vi /var/lib/pgsql/data/postgresql.conf
sudo systemctl enable postgresql --now
sudo systemctl status postgresql
sudo su - postgres -c "psql -d template1"
sudo su - postgres -c "psql -d engine"
sudo -u postgres -i ?
sudo vi /etc/ansible-runner-service/config.yaml
sudo systemctl enable ansible-runner-service --now
sudo systemctl status ansible-runner-service
sudo yum install git
mkdir ~/git && cd ~/git
git clone git://gerrit.ovirt.org/ovirt-imageio
git clone git://gerrit.ovirt.org/ovirt-engine
vi ~/.bashrc
sudo reboot
cd ovirt-engine/
make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1
cd ~/git/ovirt-imageio/
make
cd proxy/
make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
~/ovirt-engine/bin/engine-setup
~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
vi ~/.bashrc
vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
sudo poweroff
I don't know what's wrong. It does not work.
Look at the full half of the glass, you have engine.
Did you to add centos 7.7 host? 8.1?
----- Original Message -----
From: "Martin Perina" <mperina(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Wednesday, March 18, 2020 3:15:15 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
> Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder why I
> haven't got this error sooner.
> Also, given the workaround, does that mean that ansible-lint is optional?
>
Yes, same as pep8, pyflake and other build check tools
>
> ----- Original Message -----
> From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> Sent: Wednesday, March 18, 2020 2:21:14 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
>
>
> On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
>
>
> Ok, thanks for the reaction :)
>
> Getting back to the main topic, can anyone (please) try to compile the
> engine master now?
> That's what I get when I try to:
>
> [602] Don't compare to empty string
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
>
> when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
>
> [602] Don't compare to empty string
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
>
> when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
> hosted_engine_vm_cluster_name_result.stdout is undefined
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
>
> Task/Handler: Install collectd package
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
>
> Task/Handler: Install collectd plugins on engine
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
>
> Task/Handler: Install collectd plugins on hosts
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
>
> Task/Handler: Install collectd write_syslog plugin
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
>
> Task/Handler: Check if fluentd is running
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
>
> - fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
>
> changed_when: fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
>
> - fluentd_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
>
> when: fluentd_is_running|default(false)|bool == false
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
>
> Task/Handler: Check if rsyslog is running
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
>
> - rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
>
> changed_when: rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
>
> - rsyslog_is_running|default(false)|bool == true
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
>
> when: rsyslog_is_running|default(false)|bool == false
>
> [303] systemctl used in place of systemd module
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
>
> Task/Handler: Check if collectd is running
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
>
> Task/Handler: Install fluentd package
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
>
> Task/Handler: Install fluentd engine plugins
>
> [403] Package installs should not use latest
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
>
> Task/Handler: Install fluentd host plugins
>
> [601] Don't compare to literal True/False
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
>
> when: stat_result.stat.exists == True
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
>
> Task/Handler: Get ovirt_engine_fqdn
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
>
> Task/Handler: Get ovirt_engine_db_name
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
>
> Task/Handler: Get ovirt_engine_db_user
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
>
> Task/Handler: Get ovirt_engine_history_db_name
>
> [301] Commands should not change things if nothing needs doing
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
>
> Task/Handler: Get ovirt_engine_history_db_user
>
> make[1]: *** [Makefile:401: validations] Error 2
> make[1]: Leaving directory '/home/apple/git/ovirt-engine'
> make: *** [Makefile:584: all-dev] Error 2
>
> An extensive lecture from ansible, but what is this even about?
> https://bugzilla.redhat.com/show_bug.cgi?id=1804268
>
>
>
> ...
>
>
> ----- Original Message -----
> From: "Nir Soffer" < nsoffer(a)redhat.com >
> To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana
Elfassy" <
> delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> Sent: Wednesday, March 18, 2020 11:45:28 AM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> > For the time being I'm doing super careful clean installation of both
> engine and host in hopes of getting dev env working again... results are
> yet to be seen.
> > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master
> rpm for Fedora 30. Correct name for the package is
> python3-ovirt-engine-sdk4. And more examples like that with random package
> renamings.
> >
> > README definitely needs an update. If you ask me, I would rather provide
> users with a single version (Fedora 30 only) of dev installation docs that
> works rather than with two versions that don't.
>
> Please do the update.
>
> Hopefully you will have more luck, my last README patch was abandoned
> after
> it was neglected by engine maintainers.
> https://gerrit.ovirt.org/c/106467/
>
> > Are there any reasons to keep CentOS 7 info there that's irrelevant now?
>
> It should be dropped now.
>
> > I can rework the docs for FC30 eventually if no one minds.
>
> There is already a working fedora 30 instructions in the bottom of the
> readme. It used to
> work when Amit added it.
>
> > Or, if plans are to move to CentOS 8, maybe another brave soul can do
> that.
> > Fedor
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Dana Elfassy" < delfassy(a)redhat.com >, "devel"
< devel(a)ovirt.org >
> > Sent: Tuesday, March 17, 2020 1:13:48 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
> >
> >
> >
> > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> >
> > I just tried installing on Fedora 30 host and error stays the same, so
> it's probably not as OS. Might try clean setup next, what else...
> >
> > Liran, do you see anything of interest when you journalctl -u
> ansible-runner-service | grep fatal ?
> > No, we do see a trackback on the command pointing out to
> python3.7/site-packages/runner_service/services/jobs.py
> > But, because breakpoint that only makes things slower, I think it's
> timing/locking issue somehow.
> >
> >
> >
> > Fedor
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana
Elfassy" <
> delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > Sent: Tuesday, March 17, 2020 12:49:32 PM
> > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
> >
> > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> wrote:
> >
> > > I tried installing python 2 versions of some dependencies in addition
> to
> > > python 3 (as
> https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > > is not clear about it at all. on Fedora 30 default versions of these
> > > libraries you get when not specifying python vesion in the name are
> python
> > > 2.)
> > > Now error looks slightly different :'D
> > >
> > > 2020-03-17 11:08:27,294+01 ERROR
> > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
> server
> > > error, please check Ansible runner error log..
> > >
> > > Everything else stays the same, host install fails almost immediately.
> > > Does someone have any notes for Fedora 30 install they can share?
> > >
> > I start seeing it too:
> > ansible-runner-service-dev-1.0.1-1.fc30.noarch
> > python3-ansible-runner-1.3.4-2.fc30.noarch
> > engine:
> > http://pastebin.test.redhat.com/845373
> > of course no ansible log..
> > This is what journalctl show:
> > http://pastebin.test.redhat.com/845375
> >
> > After doing some debugging in the engine, after setting a breakpoint in
> > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
> Step-Over
> > until the execution (lines 139-147) it does work. Without breaking point
> > and making things slower it throws the error.
> >
> > >
> > > Thanks,
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > To: "Martin Perina" < mperina(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:52:47 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > > gunicorn-3, but when I check journalctl for ansible-runner-service I
> see
> > > the following:
> > >
> > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Starting gunicorn 19.9.0
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2992]
> > > [INFO] Using worker: sync
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2995]
> > > [INFO] Booting worker with pid: 2995
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> [2997]
> > > [INFO] Booting worker with pid: 2997
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > > options from /etc/ansible-runner-service/config.yaml
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
> to
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> from
> > > environment variables
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > overridden
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > > options from /etc/ansible-runner-service/config.yaml
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
> to
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> from
> > > environment variables
> > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > overridden
> > >
> > > Is that any suspicious? :)
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:36:40 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > >
> > >
> > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > >
> > >
> > > Nothing since there is no such service (or similarly named).
> > > Package python3-gunicorn is installed though.
> > >
> > > After you start ansible-runner-service service, you should see similar
> > > logs in journalctl:
> > >
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Starting gunicorn 19.9.0
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1386] [INFO] Using worker: sync
> > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > [1496] [INFO] Booting worker with pid: 1496
> > > And more if you execute some action from engine (like install new host
> or
> > > upgrade a host)
> > >
> > >
> > >
> > > So does that mean that something was supposed to register it as a
> service
> > > but did not?
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Martin Perina" < mperina(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" < devel(a)ovirt.org
> >
> > > Sent: Monday, March 16, 2020 3:13:03 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > >
> > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > >
> > > > FC30 dev env engine indeed :) I've done this before on other OS,
so
> > > unless
> > > > there is a blindspot somewhere in my eye it should be configured
> fine.
> > > >
> > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > > ● ansible-runner-service.service - Ansible Runner Service
> > > > Loaded: loaded
> (/usr/lib/systemd/system/ansible-runner-service.service;
> > > > enabled; vendor preset: disabled)
> > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min
> ago
> > > > Main PID: 909 (gunicorn-3)
> > > > Tasks: 9 (limit: 4915)
> > > > Memory: 193.4M
> > > > CGroup: /system.slice/ansible-runner-service.service
> > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > -w 2 runner_service.wsgi:application
> > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > --private-key
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > --private-key
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > > StrictHostKeyChecking=no -o Port=22 -o
> > > >
> > >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>
> > >
> > > > -o KbdInteractiveAu>
> > > >
> > > > And the config:
> > > >
> > > > ---
> > > > version: 1
> > > >
> > > > # playbooks_root_dir
> > > > # location of the playbooks that the service will start
> > > > playbooks_root_dir:
> > > >
> > >
>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>
> > >
> > > > # port
> > > > # tcp port for the service to listen to
> > > > port: 50001
> > > > #
> > > > # ip_address
> > > > # Specific IP address to bind to
> > > > # ip_address: '0.0.0.0'
> > > > target_user: root
> > > > #event_cache_size: 3
> > > > ssh_private_key:
> > > >
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > > >
> > > > /home/apple/ovirt-engine is where engine is dev-installed. Not sure
> what
> > > > else to check now...
> > > >
> > >
> > > Anything strange in journalctl for gunicorn-3 service?
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > package?
> > > >
> > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> >
> > > > wrote:
> > > >
> > > > > Actually, it was too early for me to celebrate.
> > > > >
> > > > > On Fedora 30, the engine compiles and runs fine, but when I try
> adding
> > > > the
> > > > > host installation fails almost immediately and I get the
following
> > > errors
> > > > > in the engine logs:
> > > > >
> > > > > ERROR
> [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
> installation
> > > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> > > Failed
> > > > to
> > > > > execute Ansible host-deploy role: Internal server error, please
> check
> > > > > Ansible runner error log.. Please check logs for more details:
> > > > >
> > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > > >
> > > > > There is nothing else. There is no file
> > > > >
> > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>
> > >
> > > > > Snapshot I'm using for the host is the same that worked just
fine
> when
> > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is that
an
> > > issue?
> > > > >
> > > >
> > > > As you mentioned building engine I assume you are using engine in
> dev
> > > env
> > > > on FC30, right? If so, have you manually configured
> > > ansible-runner-service
> > > > for dev env as mentioned in
> > > >
> > > >
> > >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > > ?
> > > >
> > > >
> > > > > Thanks,
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > > Subject: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > Hi,
> > > > >
> > > > > Resolved through installing engine on Fedora 30. From what I
> > > understand,
> > > > > CentOS 7 is not supported anymore.
> > > > >
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com >,
"Dana Elfassy" <
> > > > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org
>, "Eyal
> Shenitzky"
> > > <
> > > > > eshenitz(a)redhat.com >
> > > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > Hi Fedor,
> > > > >
> > > > > ansible-runner-service-dev package is available from
> > > > >
> > > > >
> > > >
> > >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > > repos which is included in ovirt-master-release package, which
> > > > > includes all repositories necessary for oVirt development:
> > > > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > >
> > > > > Was your issue resolved or not?
> > > > >
> > > > > Regards,
> > > > > Martin
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
> eshenitz(a)redhat.com
> > > >
> > > > > wrote:
> > > > >
> > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com >
> > > > > >
> > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
> bzlotnik(a)redhat.com >
> > > > wrote:
> > > > > >
> > > > > >> ansible-runner was added in 4.4, you shouldn't need
in 4.3
> > > > > >>
> > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> > > fgavrilo(a)redhat.com >
> > > > > >> wrote:
> > > > > >> >
> > > > > >> > Hi Sandro,
> > > > > >> >
> > > > > >> > Thanks for the suggestion, but it seems to not
help much.
> > > > > >> >
> > > > > >> > ansible-runner-service-dev still can't be
found, I checked
> repos
> > > > that
> > > > > >> are installed from
> > > > > >>
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > >> and haven't found similarly names packages
either...
> > > > > >> >
> > > > > >> > $ sudo yum install ansible-runner-service-dev
> > > > > >> > Loaded plugins: fastestmirror
> > > > > >> > Repository centos-sclo-rh-release is listed more
than once in
> the
> > > > > >> configuration
> > > > > >> > Repository sac-gluster-ansible is listed more than
once in
> the
> > > > > >> configuration
> > > > > >> > Determining fastest mirrors
> > > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > > >>
> > > > > >> | 30 kB 00:00:00
> > > > > >> > ovirt-master-epel/x86_64/metalink
> > > > > >>
> > > > > >> | 30 kB 00:00:00
> > > > > >> > * base: ftp.sh.cvut.cz
> > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > > >> > * extras: ftp.sh.cvut.cz
> > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > > > >> > * updates: ftp.sh.cvut.cz
> > > > > >> > base
> > > > > >>
> > > > > >> | 3.6 kB 00:00:00
> > > > > >> > centos-opstools-release
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > centos-ovirt-common-testing
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-ovirt44-testing
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-qemu-ev-release
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > centos-sclo-rh
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > centos-sclo-rh-release
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > centos-sclo-sclo
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > epel-apache-maven
> > > > > >>
> > > > > >> | 3.3 kB 00:00:00
> > > > > >> > extras
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-gluster6
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-opstools
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-ovirt43
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-centos-qemu-ev
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-4.3-epel
> > > > > >>
> > > > > >> | 5.3 kB 00:00:00
> > > > > >> > ovirt-4.3-snapshot
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-4.3-snapshot-static
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-4.3-virtio-win-latest
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-centos-gluster6
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-master-centos-opstools-testing
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > ovirt-master-epel
> > > > > >>
> > > > > >> | 5.3 kB 00:00:00
> > > > > >> > ovirt-master-snapshot
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-snapshot-static
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirt-master-virtio-win-latest
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > > >>
> > > > > >> | 3.0 kB 00:00:00
> > > > > >> > sac-gluster-ansible
> > > > > >>
> > > > > >> | 3.3 kB 00:00:00
> > > > > >> > updates
> > > > > >>
> > > > > >> | 2.9 kB 00:00:00
> > > > > >> > (1/32): base/7/x86_64/group_gz
> > > > > >>
> > > > > >> | 165 kB 00:00:00
> > > > > >> > (2/32): base/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.0 MB 00:00:00
> > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > > >>
> > > > > >> | 4.2 MB 00:00:00
> > > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 9.3 kB 00:00:00
> > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > > >>
> > > > > >> | 344 kB 00:00:00
> > > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 1.1 kB 00:00:01
> > > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 164 kB 00:00:00
> > > > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 429 kB 00:00:01
> > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 101 kB 00:00:01
> > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > > >>
> > > > > >> | 116 kB 00:00:00
> > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > > >>
> > > > > >> | 73 kB 00:00:00
> > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > > >>
> > > > > >> | 90 kB 00:00:00
> > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > > >>
> > > > > >> | 5.0 kB 00:00:01
> > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > > >>
> > > > > >> | 1.0 MB 00:00:00
> > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > > >>
> > > > > >> | 429 kB 00:00:00
> > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > > >>
> > > > > >> | 211 kB 00:00:00
> > > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > > > >>
> > > > > >> | 3.4 kB 00:00:00
> > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > > >>
> > > > > >> | 109 kB 00:00:00
> > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > > >>
> > > > > >> | 116 kB 00:00:00
> > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > > >>
> > > > > >> | 90 kB 00:00:00
> > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > > >>
> > > > > >> | 1.0 MB 00:00:00
> > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > > >>
> > > > > >> | 54 kB 00:00:00
> > > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > > > >>
> > > > > >> | 7.6 kB 00:00:01
> > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
> > > > > >>
> > > > > >> | 4.6 kB 00:00:00
> > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
> > > > > >>
> > > > > >> | 7.6 kB 00:00:00
> > > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > > > >>
> > > > > >> | 4.2 MB 00:00:03
> > > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > > >>
> > > > > >> | 6.7 MB 00:00:00
> > > > > >> > (30/32):
> ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > > >>
> > > > > >> | 611 kB 00:00:01
> > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > > >>
> > > > > >> | 2.3 kB 00:00:00
> > > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > > > >>
> > > > > >> | 13 kB 00:00:00
> > > > > >> > No package ansible-runner-service-dev available.
> > > > > >> > Error: Nothing to do
> > > > > >> >
> > > > > >> >
> > > > > >> > Fedor
> > > > > >> >
> > > > > >> > ----- Original Message -----
> > > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
> > > > devel(a)ovirt.org >
> > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > > > >> ansible-runner-service-dev package?
> > > > > >> >
> > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor
Gavrilov <
> > > > > >> fgavrilo(a)redhat.com >
> > > > > >> > ha scritto:
> > > > > >> >
> > > > > >> > > Thanks for the response, Eyal!
> > > > > >> > >
> > > > > >> > > I already had ovirt-master repo installed,
but updated
> > > everything
> > > > > >> just in
> > > > > >> > > case.
> > > > > >> > > I even tried both yum and dnf (since yum on
centos was
> giving
> > > me
> > > > > lots
> > > > > >> of
> > > > > >> > > grief before and I learned their behaviour
differs,
> especially
> > > > when
> > > > > it
> > > > > >> > > comes to bugs) but none works...
> > > > > >> > >
> > > > > >> > > >No package ansible-runner-service-dev
available.
> > > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > > >> > >
> > > > > >> > > Fedor
> > > > > >> > >
> > > > > >> > >
> > > > > >> > Looks like you're trying to install
ovirt-master-snapshot on
> el7.
> > > > > >> > It won't work.
> > > > > >> > Master is not supporting el7 anymore.
> > > > > >> > You can use 4.3 snapshot rpm at :
> > > > > >> >
> > > >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > >> if
> > > > > >> > you need to stay on el7.
> > > > > >> >
> > > > > >> >
> > > > > >> > > ----- Original Message -----
> > > > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > >> > > Cc: "devel" < devel(a)ovirt.org
>
> > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > > > >> > > Subject: Re: [ovirt-devel] what's up
with
> > > > ansible-runner-service-dev
> > > > > >> > > package?
> > > > > >> > >
> > > > > >> > > Hi Fedor,
> > > > > >> > >
> > > > > >> > > Please try:
> > > > > >> > > 1. dnf install
> > > > > >> > >
> > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > >> > > 2. dnf update
> > > > > >> > > 3. dnf install ansible-runner-service-dev
> > > > > >> > > 4. flow the instruction from thread 'New
dependency for
> > > > development
> > > > > >> > > environment'
> > > > > >> > > The
> > > > > >> > >
> > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov
<
> > > fgavrilo(a)redhat.com
> > > > >
> > > > > >> wrote:
> > > > > >> > >
> > > > > >> > > > Hi everyone,
> > > > > >> > > >
> > > > > >> > > > After I screwed up my dev environment
beyond repair I
> have to
> > > > set
> > > > > >> it up
> > > > > >> > > > again and I see something I haven't
last time (CentOS 7):
> > > > > >> > > >
> > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > > >> > > > Loaded plugins: fastestmirror
> > > > > >> > > > Loading mirror speeds from cached
hostfile
> > > > > >> > > > * base: mirror.hosting90.cz
> > > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > > >> > > > * extras: mirror.hosting90.cz
> > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
> > > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > > >> > > > * ovirt-master-snapshot-static:
ftp.nluug.nl
> > > > > >> > > > * updates: mirror.hosting90.cz
> > > > > >> > > > No package ansible-runner-service-dev
available.
> > > > > >> > > >
> > > > > >> > > > Maybe something's missing from my
notes, but where did it
> go?
> > > > > >> Should I
> > > > > >> > > add
> > > > > >> > > > some repo?
> > > > > >> > > >
> > > > > >> > > > Fedor
> > > > > >> > > >
_______________________________________________
> > > > > >> > > > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > > > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > >> > > > oVirt Code of Conduct:
> > > > > >> > > >
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > > > List Archives:
> > > > > >> > > >
> > > > > >> > >
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > > >> > > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> > > --
> > > > > >> > > Regards,
> > > > > >> > > Eyal Shenitzky
> > > > > >> > >
_______________________________________________
> > > > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > >> > > oVirt Code of Conduct:
> > > > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > > List Archives:
> > > > > >> > >
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > > >> > >
> > > > > >> >
> > > > > >> >
> > > > > >> > --
> > > > > >> >
> > > > > >> > Sandro Bonazzola
> > > > > >> >
> > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > > > >> >
> > > > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > > > >> >
> > > > > >> > sbonazzo(a)redhat.com
> > > > > >> > < https://www.redhat.com/ >*Red Hat respects
your work life
> > > balance.
> > > > > >> > Therefore there is no need to answer this email
out of your
> > > office
> > > > > >> hours.
> > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578
>*
> > > > > >> > _______________________________________________
> > > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > >> > oVirt Code of Conduct:
> > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> > List Archives:
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > > >> _______________________________________________
> > > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > > >> To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > >> oVirt Code of Conduct:
> > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > >> List Archives:
> > > > > >>
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > > >>
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Regards,
> > > > > > Eyal Shenitzky
> > > > > > _______________________________________________
> > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > oVirt Code of Conduct:
> > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > List Archives:
> > > > > >
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > > >
> > > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > >
> > >
> > > --
> > > Martin Perina
> > > Manager, Software Engineering
> > > Red Hat Czech s.r.o.
> > >
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> > >
> >
> >
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
>
>
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5...
4:20 p.m.
On Fri, Mar 20, 2020, 15:04 Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
I just tried installing fedora 30 host with no pre-installed cockpit,
just
ovirt-release-master repo. Same as always:
Good, we know that the error is on engine side.
2020-03-20 14:01:30,134+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID:
VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute
Ansible host-deploy role: Internal server error, please check Ansible
runner error log..
Did you check this?
Please check logs for more details:
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.
And this?
No logs as usual.
The error message mentioned two logs?
The error must be on the engine side somewhere.
Looks like issue in ansible runner, most likely misconfiguration, since
nobody reported this issue.
I hope one of the engine developers can help.
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Nir Soffer" <nsoffer(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<
delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Thursday, March 19, 2020 4:20:23 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Thanks for the response, Nir.
>You host installed without SSH server enabled?
I've been virtualizing both engine and host vm since I joined the team, so
enabling ssh access is the first thing I do after OS is installed.
>Not sure why you need cockpit.
>But you need:
>sudo dnf install
>https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
I did install ovirt-release-master rpm on the host and somehow managed to
not copy that (facepalm). But believe me it's there.
Regarding cockpit, I was following what's written in
https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts...
>Why not:
>sudo yum install
>https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it
would silently fail when you try installing from the URL :D
>Did you to add centos 7.7 host? 8.1?
Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host (that's
the lengths I went to get this thing working!). Both fail.
>Look at the full half of the glass, you have engine.
Nice one. Though I'm afraid that part might be poisoned since host
configuration that worked for me for a year now instantly fails no matter
what OS is used...
Fedor
----- Original Message -----
From: "Nir Soffer" <nsoffer(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, "Liran Rotenberg"
<
lrotenbe(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <
devel(a)ovirt.org>
Sent: Thursday, March 19, 2020 2:31:39 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
>
> Wow. I did not expect that, but after clean setup the error is still
there.
> I can't add fedora 30 host to fedora 30 engine.
>
> Here is a full bash history for the host machine since OS was installed:
>
> sudo yum update
Good
> sudo systemctl enable sshd
You host installed without SSH server enabled?
> sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual
You can configure the network from the installer, less painful.
> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install cockpit-ovirt-dashboard
> sudo systemctl enable cockpit.socket --now
Not sure why you need cockpit.
But you need:
sudo dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Same for the engine machine (I was installing dependencies separetely
because 1. yum bugs & 2. I was checking if versions are correct one by one):
>
> sudo yum update
> sudo systemctl enable sshd
> sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual
> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install java-11-openjdk-devel
> sudo yum install java-1.8.0-openjdk-headless
> sudo yum install mailcap
> sudo yum install unzip
> sudo yum install openssl
> sudo yum install bind-utils
> sudo yum install postgresql-server
> sudo yum install postgresql
> sudo yum install postgresql-contrib
> sudo yum install python2-dateutil
> sudo yum install python3-dateutil
> sudo yum install python2-m2crypto
> sudo yum install python3-m2crypto
> sudo yum install python2-psycopg2
> sudo yum install python3-psycopg2
> sudo yum install python2-jinja2
> sudo yum install python3-jinja2
> sudo yum install python2-libxml2
> sudo yum install python3-libxml2
> sudo yum install python2-daemon
> sudo yum install python3-daemon
> wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> sudo yum install ./ovirt-release-master.rpm -y
Why not:
sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Also, you want to instal this first - before you install other
packages, so you get packages
from ovirt dependencies.
> sudo yum install otopi
> sudo yum install python3-ovirt-setup-lib
> sudo yum install maven
> sudo yum install ansible
> sudo yum install ansible-runner-service-dev
> sudo yum install ovirt-ansible-roles
> sudo yum install ovirt-engine-metrics
> sudo yum install python3-ovirt-engine-sdk4
> sudo yum install pyflakes
> sudo yum install python-pep8
> sudo yum install python3-docker
> sudo yum install python3-isort
> sudo yum install gcc
> sudo yum install python2-devel
> sudo yum install systemd-python
> sudo yum install python-webob
> sudo yum install redhat-rpm-config
> sudo yum install scl-utils
> sudo yum install ovirt-imageio-common
Not needed, the ovirt-imageio-proxy will bring it.
> sudo yum install make
> sudo yum install python-requests
> sudo yum install python-subprocess32
> sudo alternatives --config java
> sudo yum install ovirt-engine-wildfly
> sudo yum install ovirt-engine-wildfly-overlay
> sudo vi /etc/security/limits.d/10-nofile.conf
> sudo firewall-cmd --add-port=8080/tcp --permanent
> sudo firewall-cmd --add-port=8443/tcp --permanent
> sudo firewall-cmd --add-port=8787/tcp --permanent
> sudo firewall-cmd --add-port=5432/tcp --permanent
> sudo firewall-cmd --add-port=54323/tcp --permanent
> sudo firewall-cmd --reload
> sudo postgresql-setup --initdb --unit postgresql
> sudo vi /var/lib/pgsql/data/pg_hba.conf
> sudo vi /var/lib/pgsql/data/postgresql.conf
> sudo systemctl enable postgresql --now
> sudo systemctl status postgresql
> sudo su - postgres -c "psql -d template1"
> sudo su - postgres -c "psql -d engine"
sudo -u postgres -i ?
> sudo vi /etc/ansible-runner-service/config.yaml
> sudo systemctl enable ansible-runner-service --now
> sudo systemctl status ansible-runner-service
> sudo yum install git
> mkdir ~/git && cd ~/git
> git clone git://gerrit.ovirt.org/ovirt-imageio
> git clone git://gerrit.ovirt.org/ovirt-engine
> vi ~/.bashrc
> sudo reboot
> cd ovirt-engine/
> make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1
> cd ~/git/ovirt-imageio/
> make
> cd proxy/
> make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
> ~/ovirt-engine/bin/engine-setup
> ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
> vi ~/.bashrc
> vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
> sudo poweroff
>
> I don't know what's wrong. It does not work.
Look at the full half of the glass, you have engine.
Did you to add centos 7.7 host? 8.1?
> ----- Original Message -----
> From: "Martin Perina" <mperina(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana
Elfassy" <
delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
> Sent: Wednesday, March 18, 2020 3:15:15 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
> On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
>
> > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder why
I
> > haven't got this error sooner.
> > Also, given the workaround, does that mean that ansible-lint is
optional?
> >
>
> Yes, same as pep8, pyflake and other build check tools
>
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> > Sent: Wednesday, March 18, 2020 2:21:14 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> >
> >
> > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> > wrote:
> >
> >
> > Ok, thanks for the reaction :)
> >
> > Getting back to the main topic, can anyone (please) try to compile the
> > engine master now?
> > That's what I get when I try to:
> >
> > [602] Don't compare to empty string
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
> >
> > when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
> >
> > [602] Don't compare to empty string
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
> >
> > when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
> > hosted_engine_vm_cluster_name_result.stdout is undefined
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
> >
> > Task/Handler: Install collectd package
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
> >
> > Task/Handler: Install collectd plugins on engine
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
> >
> > Task/Handler: Install collectd plugins on hosts
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
> >
> > Task/Handler: Install collectd write_syslog plugin
> >
> > [303] systemctl used in place of systemd module
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
> >
> > Task/Handler: Check if fluentd is running
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
> >
> > - fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
> >
> > changed_when: fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
> >
> > - fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
> >
> > when: fluentd_is_running|default(false)|bool == false
> >
> > [303] systemctl used in place of systemd module
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
> >
> > Task/Handler: Check if rsyslog is running
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
> >
> > - rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
> >
> > changed_when: rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
> >
> > - rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
> >
> > when: rsyslog_is_running|default(false)|bool == false
> >
> > [303] systemctl used in place of systemd module
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
> >
> > Task/Handler: Check if collectd is running
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
> >
> > Task/Handler: Install fluentd package
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
> >
> > Task/Handler: Install fluentd engine plugins
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
> >
> > Task/Handler: Install fluentd host plugins
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
> >
> > when: stat_result.stat.exists == True
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
> >
> > Task/Handler: Get ovirt_engine_fqdn
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
> >
> > Task/Handler: Get ovirt_engine_db_name
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
> >
> > Task/Handler: Get ovirt_engine_db_user
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
> >
> > Task/Handler: Get ovirt_engine_history_db_name
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
> >
> > Task/Handler: Get ovirt_engine_history_db_user
> >
> > make[1]: *** [Makefile:401: validations] Error 2
> > make[1]: Leaving directory '/home/apple/git/ovirt-engine'
> > make: *** [Makefile:584: all-dev] Error 2
> >
> > An extensive lecture from ansible, but what is this even about?
> > https://bugzilla.redhat.com/show_bug.cgi?id=1804268
> >
> >
> >
> > ...
> >
> >
> > ----- Original Message -----
> > From: "Nir Soffer" < nsoffer(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > Sent: Wednesday, March 18, 2020 11:45:28 AM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > wrote:
> > >
> > > For the time being I'm doing super careful clean installation of both
> > engine and host in hopes of getting dev env working again... results
are
> > yet to be seen.
> > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt
master
> > rpm for Fedora 30. Correct name for the package is
> > python3-ovirt-engine-sdk4. And more examples like that with random
package
> > renamings.
> > >
> > > README definitely needs an update. If you ask me, I would rather
provide
> > users with a single version (Fedora 30 only) of dev installation docs
that
> > works rather than with two versions that don't.
> >
> > Please do the update.
> >
> > Hopefully you will have more luck, my last README patch was abandoned
> > after
> > it was neglected by engine maintainers.
> > https://gerrit.ovirt.org/c/106467/
> >
> > > Are there any reasons to keep CentOS 7 info there that's irrelevant
now?
> >
> > It should be dropped now.
> >
> > > I can rework the docs for FC30 eventually if no one minds.
> >
> > There is already a working fedora 30 instructions in the bottom of the
> > readme. It used to
> > work when Amit added it.
> >
> > > Or, if plans are to move to CentOS 8, maybe another brave soul can do
> > that.
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org >
> > > Sent: Tuesday, March 17, 2020 1:13:48 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> > >
> > >
> > >
> > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > wrote:
> > >
> > >
> > > I just tried installing on Fedora 30 host and error stays the same,
so
> > it's probably not as OS. Might try clean setup next, what else...
> > >
> > > Liran, do you see anything of interest when you journalctl -u
> > ansible-runner-service | grep fatal ?
> > > No, we do see a trackback on the command pointing out to
> > python3.7/site-packages/runner_service/services/jobs.py
> > > But, because breakpoint that only makes things slower, I think it's
> > timing/locking issue somehow.
> > >
> > >
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > > Sent: Tuesday, March 17, 2020 12:49:32 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> > >
> > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <
fgavrilo(a)redhat.com >
> > wrote:
> > >
> > > > I tried installing python 2 versions of some dependencies in
addition
> > to
> > > > python 3 (as
> > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > > > is not clear about it at all. on Fedora 30 default versions of
these
> > > > libraries you get when not specifying python vesion in the name are
> > python
> > > > 2.)
> > > > Now error looks slightly different :'D
> > > >
> > > > 2020-03-17 11:08:27,294+01 ERROR
> > > >
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
> > server
> > > > error, please check Ansible runner error log..
> > > >
> > > > Everything else stays the same, host install fails almost
immediately.
> > > > Does someone have any notes for Fedora 30 install they can share?
> > > >
> > > I start seeing it too:
> > > ansible-runner-service-dev-1.0.1-1.fc30.noarch
> > > python3-ansible-runner-1.3.4-2.fc30.noarch
> > > engine:
> > > http://pastebin.test.redhat.com/845373
> > > of course no ansible log..
> > > This is what journalctl show:
> > > http://pastebin.test.redhat.com/845375
> > >
> > > After doing some debugging in the engine, after setting a breakpoint
in
> > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
> > Step-Over
> > > until the execution (lines 139-147) it does work. Without breaking
point
> > > and making things slower it throws the error.
> > >
> > > >
> > > > Thanks,
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:52:47 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > > package?
> > > >
> > > > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > > > gunicorn-3, but when I check journalctl for ansible-runner-service
I
> > see
> > > > the following:
> > > >
> > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Starting gunicorn 19.9.0
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Using worker: sync
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2995]
> > > > [INFO] Booting worker with pid: 2995
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2997]
> > > > [INFO] Booting worker with pid: 2997
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
configuration
> > > > options from /etc/ansible-runner-service/config.yaml
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
playbooks_root_dir
> > to
> > > >
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to
root
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key
to
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> > from
> > > > environment variables
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > > overridden
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
configuration
> > > > options from /etc/ansible-runner-service/config.yaml
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
playbooks_root_dir
> > to
> > > >
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to
root
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key
to
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> > from
> > > > environment variables
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > > overridden
> > > >
> > > > Is that any suspicious? :)
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:36:40 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > > package?
> > > >
> > > >
> > > >
> > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> > >
> > > > wrote:
> > > >
> > > >
> > > > Nothing since there is no such service (or similarly named).
> > > > Package python3-gunicorn is installed though.
> > > >
> > > > After you start ansible-runner-service service, you should see
similar
> > > > logs in journalctl:
> > > >
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
+0100]
> > > > [1386] [INFO] Starting gunicorn 19.9.0
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
+0100]
> > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
+0100]
> > > > [1386] [INFO] Using worker: sync
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
+0100]
> > > > [1496] [INFO] Booting worker with pid: 1496
> > > > And more if you execute some action from engine (like install new
host
> > or
> > > > upgrade a host)
> > > >
> > > >
> > > >
> > > > So does that mean that something was supposed to register it as a
> > service
> > > > but did not?
> > > >
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:13:03 PM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > package?
> > > >
> > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> > >
> > > > wrote:
> > > >
> > > > > FC30 dev env engine indeed :) I've done this before on other
OS,
so
> > > > unless
> > > > > there is a blindspot somewhere in my eye it should be
configured
> > fine.
> > > > >
> > > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > > > ● ansible-runner-service.service - Ansible Runner Service
> > > > > Loaded: loaded
> > (/usr/lib/systemd/system/ansible-runner-service.service;
> > > > > enabled; vendor preset: disabled)
> > > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET;
16min
> > ago
> > > > > Main PID: 909 (gunicorn-3)
> > > > > Tasks: 9 (limit: 4915)
> > > > > Memory: 193.4M
> > > > > CGroup: /system.slice/ansible-runner-service.service
> > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > --private-key
> > > > >
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
-i
> > > > >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > --private-key
> > > > >
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
-i
> > > > >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > > > StrictHostKeyChecking=no -o Port=22 -o
> > > > >
> > > >
> >
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> >
> > > >
> > > > > -o KbdInteractiveAu>
> > > > >
> > > > > And the config:
> > > > >
> > > > > ---
> > > > > version: 1
> > > > >
> > > > > # playbooks_root_dir
> > > > > # location of the playbooks that the service will start
> > > > > playbooks_root_dir:
> > > > >
> > > >
> >
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> >
> > > >
> > > > > # port
> > > > > # tcp port for the service to listen to
> > > > > port: 50001
> > > > > #
> > > > > # ip_address
> > > > > # Specific IP address to bind to
> > > > > # ip_address: '0.0.0.0'
> > > > > target_user: root
> > > > > #event_cache_size: 3
> > > > > ssh_private_key:
> > > > >
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > > > >
> > > > > /home/apple/ovirt-engine is where engine is dev-installed. Not
sure
> > what
> > > > > else to check now...
> > > > >
> > > >
> > > > Anything strange in journalctl for gunicorn-3 service?
> > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> > devel(a)ovirt.org >
> > > > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> > >
> > > > > wrote:
> > > > >
> > > > > > Actually, it was too early for me to celebrate.
> > > > > >
> > > > > > On Fedora 30, the engine compiles and runs fine, but when I
try
> > adding
> > > > > the
> > > > > > host installation fails almost immediately and I get the
following
> > > > errors
> > > > > > in the engine logs:
> > > > > >
> > > > > > ERROR
> > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
> > installation
> > > > > > failed for host
'6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> > > > Failed
> > > > > to
> > > > > > execute Ansible host-deploy role: Internal server error,
please
> > check
> > > > > > Ansible runner error log.. Please check logs for more
details:
> > > > > >
> > > > >
> > > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > > >
> > > > > > There is nothing else. There is no file
> > > > > >
> > > > >
> > > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > > > Snapshot I'm using for the host is the same that worked
just
fine
> > when
> > > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is
that
an
> > > > issue?
> > > > > >
> > > > >
> > > > > As you mentioned building engine I assume you are using engine
in
> > dev
> > > > env
> > > > > on FC30, right? If so, have you manually configured
> > > > ansible-runner-service
> > > > > for dev env as mentioned in
> > > > >
> > > > >
> > > >
> >
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > > > ?
> > > > >
> > > > >
> > > > > > Thanks,
> > > > > > Fedor
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> > devel(a)ovirt.org
> > > > >
> > > > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > > > Subject: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > > > package?
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > Resolved through installing engine on Fedora 30. From what
I
> > > > understand,
> > > > > > CentOS 7 is not supported anymore.
> > > > > >
> > > > > > Fedor
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Martin Perina" < mperina(a)redhat.com
>
> > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com
>, "Dana Elfassy" <
> > > > > > delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >, "Eyal
> > Shenitzky"
> > > > <
> > > > > > eshenitz(a)redhat.com >
> > > > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > > ansible-runner-service-dev
> > > > > > package?
> > > > > >
> > > > > > Hi Fedor,
> > > > > >
> > > > > > ansible-runner-service-dev package is available from
> > > > > >
> > > > > >
> > > > >
> > > >
> >
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > > > repos which is included in ovirt-master-release package,
which
> > > > > > includes all repositories necessary for oVirt development:
> > > > > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > >
> > > > > > Was your issue resolved or not?
> > > > > >
> > > > > > Regards,
> > > > > > Martin
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
> > eshenitz(a)redhat.com
> > > > >
> > > > > > wrote:
> > > > > >
> > > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com
>
> > > > > > >
> > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
> > bzlotnik(a)redhat.com >
> > > > > wrote:
> > > > > > >
> > > > > > >> ansible-runner was added in 4.4, you shouldn't
need in 4.3
> > > > > > >>
> > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov
<
> > > > fgavrilo(a)redhat.com >
> > > > > > >> wrote:
> > > > > > >> >
> > > > > > >> > Hi Sandro,
> > > > > > >> >
> > > > > > >> > Thanks for the suggestion, but it seems to
not help much.
> > > > > > >> >
> > > > > > >> > ansible-runner-service-dev still can't be
found, I checked
> > repos
> > > > > that
> > > > > > >> are installed from
> > > > > > >>
> > > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > >> and haven't found similarly names packages
either...
> > > > > > >> >
> > > > > > >> > $ sudo yum install
ansible-runner-service-dev
> > > > > > >> > Loaded plugins: fastestmirror
> > > > > > >> > Repository centos-sclo-rh-release is listed
more than
once in
> > the
> > > > > > >> configuration
> > > > > > >> > Repository sac-gluster-ansible is listed more
than once in
> > the
> > > > > > >> configuration
> > > > > > >> > Determining fastest mirrors
> > > > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > > > >>
> > > > > > >> | 30 kB 00:00:00
> > > > > > >> > ovirt-master-epel/x86_64/metalink
> > > > > > >>
> > > > > > >> | 30 kB 00:00:00
> > > > > > >> > * base: ftp.sh.cvut.cz
> > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > > > >> > * extras: ftp.sh.cvut.cz
> > > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > > > >> > * ovirt-4.3-snapshot-static:
ftp.plusline.net
> > > > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > > > >> > * ovirt-master-snapshot-static:
ftp.plusline.net
> > > > > > >> > * updates: ftp.sh.cvut.cz
> > > > > > >> > base
> > > > > > >>
> > > > > > >> | 3.6 kB 00:00:00
> > > > > > >> > centos-opstools-release
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > centos-ovirt-common-testing
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-ovirt44-testing
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-qemu-ev-release
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-sclo-rh
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > centos-sclo-rh-release
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > centos-sclo-sclo
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > epel-apache-maven
> > > > > > >>
> > > > > > >> | 3.3 kB 00:00:00
> > > > > > >> > extras
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-gluster6
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-opstools
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-ovirt43
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-qemu-ev
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-epel
> > > > > > >>
> > > > > > >> | 5.3 kB 00:00:00
> > > > > > >> > ovirt-4.3-snapshot
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-4.3-snapshot-static
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-4.3-virtio-win-latest
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-centos-gluster6
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-master-centos-opstools-testing
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-master-epel
> > > > > > >>
> > > > > > >> | 5.3 kB 00:00:00
> > > > > > >> > ovirt-master-snapshot
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-snapshot-static
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-virtio-win-latest
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > sac-gluster-ansible
> > > > > > >>
> > > > > > >> | 3.3 kB 00:00:00
> > > > > > >> > updates
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > (1/32): base/7/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 165 kB 00:00:00
> > > > > > >> > (2/32): base/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.0 MB 00:00:00
> > > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 4.2 MB 00:00:00
> > > > > > >> > (4/32):
centos-qemu-ev-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 9.3 kB 00:00:00
> > > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 344 kB 00:00:00
> > > > > > >> > (6/32):
centos-ovirt44-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 1.1 kB 00:00:01
> > > > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 164 kB 00:00:00
> > > > > > >> > (8/32):
centos-opstools-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 429 kB 00:00:01
> > > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 101 kB 00:00:01
> > > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 116 kB 00:00:00
> > > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 73 kB 00:00:00
> > > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 90 kB 00:00:00
> > > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 5.0 kB 00:00:01
> > > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > > > >>
> > > > > > >> | 1.0 MB 00:00:00
> > > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 429 kB 00:00:00
> > > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 211 kB 00:00:00
> > > > > > >> > (17/32):
ovirt-4.3-snapshot-static/7/primary_db
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > > > >>
> > > > > > >> | 109 kB 00:00:00
> > > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 116 kB 00:00:00
> > > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 90 kB 00:00:00
> > > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > > > >>
> > > > > > >> | 1.0 MB 00:00:00
> > > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > > > >>
> > > > > > >> | 54 kB 00:00:00
> > > > > > >> > (24/32):
ovirt-4.3-virtio-win-latest/primary_db
> > > > > > >>
> > > > > > >> | 7.6 kB 00:00:01
> > > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
> > > > > > >>
> > > > > > >> | 4.6 kB 00:00:00
> > > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
> > > > > > >>
> > > > > > >> | 7.6 kB 00:00:00
> > > > > > >> > (28/32):
centos-sclo-rh-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 4.2 MB 00:00:03
> > > > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (30/32):
> > ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 611 kB 00:00:01
> > > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 2.3 kB 00:00:00
> > > > > > >> > (32/32):
sac-gluster-ansible/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 13 kB 00:00:00
> > > > > > >> > No package ansible-runner-service-dev
available.
> > > > > > >> > Error: Nothing to do
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > Fedor
> > > > > > >> >
> > > > > > >> > ----- Original Message -----
> > > > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
> > > > > devel(a)ovirt.org >
> > > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > > > >> > Subject: Re: [ovirt-devel] Re: what's up
with
> > > > > > >> ansible-runner-service-dev package?
> > > > > > >> >
> > > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39
Fedor Gavrilov <
> > > > > > >> fgavrilo(a)redhat.com >
> > > > > > >> > ha scritto:
> > > > > > >> >
> > > > > > >> > > Thanks for the response, Eyal!
> > > > > > >> > >
> > > > > > >> > > I already had ovirt-master repo
installed, but updated
> > > > everything
> > > > > > >> just in
> > > > > > >> > > case.
> > > > > > >> > > I even tried both yum and dnf (since yum
on centos was
> > giving
> > > > me
> > > > > > lots
> > > > > > >> of
> > > > > > >> > > grief before and I learned their
behaviour differs,
> > especially
> > > > > when
> > > > > > it
> > > > > > >> > > comes to bugs) but none works...
> > > > > > >> > >
> > > > > > >> > > >No package
ansible-runner-service-dev available.
> > > > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > > > >> > >
> > > > > > >> > > Fedor
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > Looks like you're trying to install
ovirt-master-snapshot
on
> > el7.
> > > > > > >> > It won't work.
> > > > > > >> > Master is not supporting el7 anymore.
> > > > > > >> > You can use 4.3 snapshot rpm at :
> > > > > > >> >
> > > > >
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > >> if
> > > > > > >> > you need to stay on el7.
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > > ----- Original Message -----
> > > > > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > >> > > Cc: "devel" <
devel(a)ovirt.org >
> > > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16
PM
> > > > > > >> > > Subject: Re: [ovirt-devel] what's up
with
> > > > > ansible-runner-service-dev
> > > > > > >> > > package?
> > > > > > >> > >
> > > > > > >> > > Hi Fedor,
> > > > > > >> > >
> > > > > > >> > > Please try:
> > > > > > >> > > 1. dnf install
> > > > > > >> > >
> > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > > >> > > 2. dnf update
> > > > > > >> > > 3. dnf install
ansible-runner-service-dev
> > > > > > >> > > 4. flow the instruction from thread
'New dependency for
> > > > > development
> > > > > > >> > > environment'
> > > > > > >> > > The
> > > > > > >> > >
> > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor
Gavrilov <
> > > > fgavrilo(a)redhat.com
> > > > > >
> > > > > > >> wrote:
> > > > > > >> > >
> > > > > > >> > > > Hi everyone,
> > > > > > >> > > >
> > > > > > >> > > > After I screwed up my dev
environment beyond repair I
> > have to
> > > > > set
> > > > > > >> it up
> > > > > > >> > > > again and I see something I
haven't last time (CentOS
7):
> > > > > > >> > > >
> > > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > > > >> > > > Loaded plugins: fastestmirror
> > > > > > >> > > > Loading mirror speeds from cached
hostfile
> > > > > > >> > > > * base: mirror.hosting90.cz
> > > > > > >> > > > * centos-sclo-rh:
mirror.hosting90.cz
> > > > > > >> > > > * centos-sclo-sclo:
mirror.hosting90.cz
> > > > > > >> > > > * extras: mirror.hosting90.cz
> > > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
> > > > > > >> > > > * ovirt-master-snapshot:
ftp.nluug.nl
> > > > > > >> > > > * ovirt-master-snapshot-static:
ftp.nluug.nl
> > > > > > >> > > > * updates: mirror.hosting90.cz
> > > > > > >> > > > No package
ansible-runner-service-dev available.
> > > > > > >> > > >
> > > > > > >> > > > Maybe something's missing from
my notes, but where
did it
> > go?
> > > > > > >> Should I
> > > > > > >> > > add
> > > > > > >> > > > some repo?
> > > > > > >> > > >
> > > > > > >> > > > Fedor
> > > > > > >> > > >
_______________________________________________
> > > > > > >> > > > Devel mailing list --
devel(a)ovirt.org
> > > > > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > >> > > > Privacy Statement:
> > https://www.ovirt.org/privacy-policy.html
> > > > > > >> > > > oVirt Code of Conduct:
> > > > > > >> > > >
> > https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > > > List Archives:
> > > > > > >> > > >
> > > > > > >> > >
> > > > > > >>
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > > > >> > > >
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > > --
> > > > > > >> > > Regards,
> > > > > > >> > > Eyal Shenitzky
> > > > > > >> > >
_______________________________________________
> > > > > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > >> > > Privacy Statement:
> > https://www.ovirt.org/privacy-policy.html
> > > > > > >> > > oVirt Code of Conduct:
> > > > > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > > List Archives:
> > > > > > >> > >
> > > > > > >>
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > > > >> > >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > --
> > > > > > >> >
> > > > > > >> > Sandro Bonazzola
> > > > > > >> >
> > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D
RHV
> > > > > > >> >
> > > > > > >> > Red Hat EMEA < https://www.redhat.com/
>
> > > > > > >> >
> > > > > > >> > sbonazzo(a)redhat.com
> > > > > > >> > < https://www.redhat.com/ >*Red Hat
respects your work
life
> > > > balance.
> > > > > > >> > Therefore there is no need to answer this
email out of
your
> > > > office
> > > > > > >> hours.
> > > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578
>*
> > > > > > >> >
_______________________________________________
> > > > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > >> > oVirt Code of Conduct:
> > > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > List Archives:
> > > > > > >>
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > > > >> _______________________________________________
> > > > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > > > >> To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > >> oVirt Code of Conduct:
> > > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> List Archives:
> > > > > > >>
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Regards,
> > > > > > > Eyal Shenitzky
> > > > > > > _______________________________________________
> > > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > > oVirt Code of Conduct:
> > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > List Archives:
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Martin Perina
> > > > > > Manager, Software Engineering
> > > > > > Red Hat Czech s.r.o.
> > > > > > _______________________________________________
> > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > oVirt Code of Conduct:
> > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > List Archives:
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > > > >
> > > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > >
> > > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> > > >
> > >
> > >
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
> >
> >
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
> >
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5...
12:29 p.m.
I encounter that problem when I didn't configure my ansible runner as needed
Please check that your conf file (/etc/ansible-runner-service/config.yaml)
is as follow:
---
*version: 1 playbooks_root_dir:
'/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
ssh_private_key:
'/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
port: 50001 target_user: root*
On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
I just tried installing fedora 30 host with no pre-installed cockpit,
just
ovirt-release-master repo. Same as always:
2020-03-20 14:01:30,134+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID:
VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute
Ansible host-deploy role: Internal server error, please check Ansible
runner error log.. Please check logs for more details:
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.
No logs as usual. The error must be on the engine side somewhere...
----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
To: "Nir Soffer" <nsoffer(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<
delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Thursday, March 19, 2020 4:20:23 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
Thanks for the response, Nir.
>You host installed without SSH server enabled?
I've been virtualizing both engine and host vm since I joined the team, so
enabling ssh access is the first thing I do after OS is installed.
>Not sure why you need cockpit.
>But you need:
>sudo dnf install
>https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
I did install ovirt-release-master rpm on the host and somehow managed to
not copy that (facepalm). But believe me it's there.
Regarding cockpit, I was following what's written in
https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts...
>Why not:
>sudo yum install
>https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it
would silently fail when you try installing from the URL :D
>Did you to add centos 7.7 host? 8.1?
Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host (that's
the lengths I went to get this thing working!). Both fail.
>Look at the full half of the glass, you have engine.
Nice one. Though I'm afraid that part might be poisoned since host
configuration that worked for me for a year now instantly fails no matter
what OS is used...
Fedor
----- Original Message -----
From: "Nir Soffer" <nsoffer(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, "Liran Rotenberg"
<
lrotenbe(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <
devel(a)ovirt.org>
Sent: Thursday, March 19, 2020 2:31:39 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
>
> Wow. I did not expect that, but after clean setup the error is still
there.
> I can't add fedora 30 host to fedora 30 engine.
>
> Here is a full bash history for the host machine since OS was installed:
>
> sudo yum update
Good
> sudo systemctl enable sshd
You host installed without SSH server enabled?
> sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual
You can configure the network from the installer, less painful.
> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install cockpit-ovirt-dashboard
> sudo systemctl enable cockpit.socket --now
Not sure why you need cockpit.
But you need:
sudo dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Same for the engine machine (I was installing dependencies separetely
because 1. yum bugs & 2. I was checking if versions are correct one by one):
>
> sudo yum update
> sudo systemctl enable sshd
> sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual
> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install java-11-openjdk-devel
> sudo yum install java-1.8.0-openjdk-headless
> sudo yum install mailcap
> sudo yum install unzip
> sudo yum install openssl
> sudo yum install bind-utils
> sudo yum install postgresql-server
> sudo yum install postgresql
> sudo yum install postgresql-contrib
> sudo yum install python2-dateutil
> sudo yum install python3-dateutil
> sudo yum install python2-m2crypto
> sudo yum install python3-m2crypto
> sudo yum install python2-psycopg2
> sudo yum install python3-psycopg2
> sudo yum install python2-jinja2
> sudo yum install python3-jinja2
> sudo yum install python2-libxml2
> sudo yum install python3-libxml2
> sudo yum install python2-daemon
> sudo yum install python3-daemon
> wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> sudo yum install ./ovirt-release-master.rpm -y
Why not:
sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
Also, you want to instal this first - before you install other
packages, so you get packages
from ovirt dependencies.
> sudo yum install otopi
> sudo yum install python3-ovirt-setup-lib
> sudo yum install maven
> sudo yum install ansible
> sudo yum install ansible-runner-service-dev
> sudo yum install ovirt-ansible-roles
> sudo yum install ovirt-engine-metrics
> sudo yum install python3-ovirt-engine-sdk4
> sudo yum install pyflakes
> sudo yum install python-pep8
> sudo yum install python3-docker
> sudo yum install python3-isort
> sudo yum install gcc
> sudo yum install python2-devel
> sudo yum install systemd-python
> sudo yum install python-webob
> sudo yum install redhat-rpm-config
> sudo yum install scl-utils
> sudo yum install ovirt-imageio-common
Not needed, the ovirt-imageio-proxy will bring it.
> sudo yum install make
> sudo yum install python-requests
> sudo yum install python-subprocess32
> sudo alternatives --config java
> sudo yum install ovirt-engine-wildfly
> sudo yum install ovirt-engine-wildfly-overlay
> sudo vi /etc/security/limits.d/10-nofile.conf
> sudo firewall-cmd --add-port=8080/tcp --permanent
> sudo firewall-cmd --add-port=8443/tcp --permanent
> sudo firewall-cmd --add-port=8787/tcp --permanent
> sudo firewall-cmd --add-port=5432/tcp --permanent
> sudo firewall-cmd --add-port=54323/tcp --permanent
> sudo firewall-cmd --reload
> sudo postgresql-setup --initdb --unit postgresql
> sudo vi /var/lib/pgsql/data/pg_hba.conf
> sudo vi /var/lib/pgsql/data/postgresql.conf
> sudo systemctl enable postgresql --now
> sudo systemctl status postgresql
> sudo su - postgres -c "psql -d template1"
> sudo su - postgres -c "psql -d engine"
sudo -u postgres -i ?
> sudo vi /etc/ansible-runner-service/config.yaml
> sudo systemctl enable ansible-runner-service --now
> sudo systemctl status ansible-runner-service
> sudo yum install git
> mkdir ~/git && cd ~/git
> git clone git://gerrit.ovirt.org/ovirt-imageio
> git clone git://gerrit.ovirt.org/ovirt-engine
> vi ~/.bashrc
> sudo reboot
> cd ovirt-engine/
> make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1
> cd ~/git/ovirt-imageio/
> make
> cd proxy/
> make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
> ~/ovirt-engine/bin/engine-setup
> ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
> vi ~/.bashrc
> vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
> sudo poweroff
>
> I don't know what's wrong. It does not work.
Look at the full half of the glass, you have engine.
Did you to add centos 7.7 host? 8.1?
> ----- Original Message -----
> From: "Martin Perina" <mperina(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana
Elfassy" <
delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
> Sent: Wednesday, March 18, 2020 3:15:15 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
package?
>
> On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
wrote:
>
> > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder why
I
> > haven't got this error sooner.
> > Also, given the workaround, does that mean that ansible-lint is
optional?
> >
>
> Yes, same as pep8, pyflake and other build check tools
>
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> > Sent: Wednesday, March 18, 2020 2:21:14 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> >
> >
> > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com >
> > wrote:
> >
> >
> > Ok, thanks for the reaction :)
> >
> > Getting back to the main topic, can anyone (please) try to compile the
> > engine master now?
> > That's what I get when I try to:
> >
> > [602] Don't compare to empty string
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
> >
> > when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
> >
> > [602] Don't compare to empty string
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
> >
> > when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
> > hosted_engine_vm_cluster_name_result.stdout is undefined
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
> >
> > Task/Handler: Install collectd package
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
> >
> > Task/Handler: Install collectd plugins on engine
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
> >
> > Task/Handler: Install collectd plugins on hosts
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
> >
> > Task/Handler: Install collectd write_syslog plugin
> >
> > [303] systemctl used in place of systemd module
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
> >
> > Task/Handler: Check if fluentd is running
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
> >
> > - fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
> >
> > changed_when: fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
> >
> > - fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
> >
> > when: fluentd_is_running|default(false)|bool == false
> >
> > [303] systemctl used in place of systemd module
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
> >
> > Task/Handler: Check if rsyslog is running
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
> >
> > - rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
> >
> > changed_when: rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
> >
> > - rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
> >
> > when: rsyslog_is_running|default(false)|bool == false
> >
> > [303] systemctl used in place of systemd module
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
> >
> > Task/Handler: Check if collectd is running
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
> >
> > Task/Handler: Install fluentd package
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
> >
> > Task/Handler: Install fluentd engine plugins
> >
> > [403] Package installs should not use latest
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
> >
> > Task/Handler: Install fluentd host plugins
> >
> > [601] Don't compare to literal True/False
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
> >
> > when: stat_result.stat.exists == True
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
> >
> > Task/Handler: Get ovirt_engine_fqdn
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
> >
> > Task/Handler: Get ovirt_engine_db_name
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
> >
> > Task/Handler: Get ovirt_engine_db_user
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
> >
> > Task/Handler: Get ovirt_engine_history_db_name
> >
> > [301] Commands should not change things if nothing needs doing
> >
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
> >
> > Task/Handler: Get ovirt_engine_history_db_user
> >
> > make[1]: *** [Makefile:401: validations] Error 2
> > make[1]: Leaving directory '/home/apple/git/ovirt-engine'
> > make: *** [Makefile:584: all-dev] Error 2
> >
> > An extensive lecture from ansible, but what is this even about?
> > https://bugzilla.redhat.com/show_bug.cgi?id=1804268
> >
> >
> >
> > ...
> >
> >
> > ----- Original Message -----
> > From: "Nir Soffer" < nsoffer(a)redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > Sent: Wednesday, March 18, 2020 11:45:28 AM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > wrote:
> > >
> > > For the time being I'm doing super careful clean installation of both
> > engine and host in hopes of getting dev env working again... results
are
> > yet to be seen.
> > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt
master
> > rpm for Fedora 30. Correct name for the package is
> > python3-ovirt-engine-sdk4. And more examples like that with random
package
> > renamings.
> > >
> > > README definitely needs an update. If you ask me, I would rather
provide
> > users with a single version (Fedora 30 only) of dev installation docs
that
> > works rather than with two versions that don't.
> >
> > Please do the update.
> >
> > Hopefully you will have more luck, my last README patch was abandoned
> > after
> > it was neglected by engine maintainers.
> > https://gerrit.ovirt.org/c/106467/
> >
> > > Are there any reasons to keep CentOS 7 info there that's irrelevant
now?
> >
> > It should be dropped now.
> >
> > > I can rework the docs for FC30 eventually if no one minds.
> >
> > There is already a working fedora 30 instructions in the bottom of the
> > readme. It used to
> > work when Amit added it.
> >
> > > Or, if plans are to move to CentOS 8, maybe another brave soul can do
> > that.
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org >
> > > Sent: Tuesday, March 17, 2020 1:13:48 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> > >
> > >
> > >
> > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo(a)redhat.com
>
> > wrote:
> > >
> > >
> > > I just tried installing on Fedora 30 host and error stays the same,
so
> > it's probably not as OS. Might try clean setup next, what else...
> > >
> > > Liran, do you see anything of interest when you journalctl -u
> > ansible-runner-service | grep fatal ?
> > > No, we do see a trackback on the command pointing out to
> > python3.7/site-packages/runner_service/services/jobs.py
> > > But, because breakpoint that only makes things slower, I think it's
> > timing/locking issue somehow.
> > >
> > >
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana
Elfassy" <
> > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > > Sent: Tuesday, March 17, 2020 12:49:32 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > package?
> > >
> > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <
fgavrilo(a)redhat.com >
> > wrote:
> > >
> > > > I tried installing python 2 versions of some dependencies in
addition
> > to
> > > > python 3 (as
> > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > > > is not clear about it at all. on Fedora 30 default versions of
these
> > > > libraries you get when not specifying python vesion in the name are
> > python
> > > > 2.)
> > > > Now error looks slightly different :'D
> > > >
> > > > 2020-03-17 11:08:27,294+01 ERROR
> > > >
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
> > server
> > > > error, please check Ansible runner error log..
> > > >
> > > > Everything else stays the same, host install fails almost
immediately.
> > > > Does someone have any notes for Fedora 30 install they can share?
> > > >
> > > I start seeing it too:
> > > ansible-runner-service-dev-1.0.1-1.fc30.noarch
> > > python3-ansible-runner-1.3.4-2.fc30.noarch
> > > engine:
> > > http://pastebin.test.redhat.com/845373
> > > of course no ansible log..
> > > This is what journalctl show:
> > > http://pastebin.test.redhat.com/845375
> > >
> > > After doing some debugging in the engine, after setting a breakpoint
in
> > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
> > Step-Over
> > > until the execution (lines 139-147) it does work. Without breaking
point
> > > and making things slower it throws the error.
> > >
> > > >
> > > > Thanks,
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:52:47 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > > package?
> > > >
> > > > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > > > gunicorn-3, but when I check journalctl for ansible-runner-service
I
> > see
> > > > the following:
> > > >
> > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Starting gunicorn 19.9.0
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Using worker: sync
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2995]
> > > > [INFO] Booting worker with pid: 2995
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2997]
> > > > [INFO] Booting worker with pid: 2997
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
configuration
> > > > options from /etc/ansible-runner-service/config.yaml
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
playbooks_root_dir
> > to
> > > >
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to
root
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key
to
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> > from
> > > > environment variables
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > > overridden
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
configuration
> > > > options from /etc/ansible-runner-service/config.yaml
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
playbooks_root_dir
> > to
> > > >
> >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to
root
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key
to
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> > from
> > > > environment variables
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > > overridden
> > > >
> > > > Is that any suspicious? :)
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:36:40 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > > package?
> > > >
> > > >
> > > >
> > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> > >
> > > > wrote:
> > > >
> > > >
> > > > Nothing since there is no such service (or similarly named).
> > > > Package python3-gunicorn is installed though.
> > > >
> > > > After you start ansible-runner-service service, you should see
similar
> > > > logs in journalctl:
> > > >
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
+0100]
> > > > [1386] [INFO] Starting gunicorn 19.9.0
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
+0100]
> > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
+0100]
> > > > [1386] [INFO] Using worker: sync
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
+0100]
> > > > [1496] [INFO] Booting worker with pid: 1496
> > > > And more if you execute some action from engine (like install new
host
> > or
> > > > upgrade a host)
> > > >
> > > >
> > > >
> > > > So does that mean that something was supposed to register it as a
> > service
> > > > but did not?
> > > >
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
devel(a)ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:13:03 PM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > package?
> > > >
> > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> > >
> > > > wrote:
> > > >
> > > > > FC30 dev env engine indeed :) I've done this before on other
OS,
so
> > > > unless
> > > > > there is a blindspot somewhere in my eye it should be
configured
> > fine.
> > > > >
> > > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > > > ● ansible-runner-service.service - Ansible Runner Service
> > > > > Loaded: loaded
> > (/usr/lib/systemd/system/ansible-runner-service.service;
> > > > > enabled; vendor preset: disabled)
> > > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET;
16min
> > ago
> > > > > Main PID: 909 (gunicorn-3)
> > > > > Tasks: 9 (limit: 4915)
> > > > > Memory: 193.4M
> > > > > CGroup: /system.slice/ansible-runner-service.service
> > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > --private-key
> > > > >
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
-i
> > > > >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > --private-key
> > > > >
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
-i
> > > > >
/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > > > StrictHostKeyChecking=no -o Port=22 -o
> > > > >
> > > >
> >
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> >
> > > >
> > > > > -o KbdInteractiveAu>
> > > > >
> > > > > And the config:
> > > > >
> > > > > ---
> > > > > version: 1
> > > > >
> > > > > # playbooks_root_dir
> > > > > # location of the playbooks that the service will start
> > > > > playbooks_root_dir:
> > > > >
> > > >
> >
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> >
> > > >
> > > > > # port
> > > > > # tcp port for the service to listen to
> > > > > port: 50001
> > > > > #
> > > > > # ip_address
> > > > > # Specific IP address to bind to
> > > > > # ip_address: '0.0.0.0'
> > > > > target_user: root
> > > > > #event_cache_size: 3
> > > > > ssh_private_key:
> > > > >
'/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > > > >
> > > > > /home/apple/ovirt-engine is where engine is dev-installed. Not
sure
> > what
> > > > > else to check now...
> > > > >
> > > >
> > > > Anything strange in journalctl for gunicorn-3 service?
> > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> > devel(a)ovirt.org >
> > > > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
> > >
> > > > > wrote:
> > > > >
> > > > > > Actually, it was too early for me to celebrate.
> > > > > >
> > > > > > On Fedora 30, the engine compiles and runs fine, but when I
try
> > adding
> > > > > the
> > > > > > host installation fails almost immediately and I get the
following
> > > > errors
> > > > > > in the engine logs:
> > > > > >
> > > > > > ERROR
> > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
> > installation
> > > > > > failed for host
'6402d350-69de-4181-bfc1-50e0e79c8228',
'banana':
> > > > Failed
> > > > > to
> > > > > > execute Ansible host-deploy role: Internal server error,
please
> > check
> > > > > > Ansible runner error log.. Please check logs for more
details:
> > > > > >
> > > > >
> > > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > > >
> > > > > > There is nothing else. There is no file
> > > > > >
> > > > >
> > > >
> >
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > > > Snapshot I'm using for the host is the same that worked
just
fine
> > when
> > > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is
that
an
> > > > issue?
> > > > > >
> > > > >
> > > > > As you mentioned building engine I assume you are using engine
in
> > dev
> > > > env
> > > > > on FC30, right? If so, have you manually configured
> > > > ansible-runner-service
> > > > > for dev env as mentioned in
> > > > >
> > > > >
> > > >
> >
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > > > ?
> > > > >
> > > > >
> > > > > > Thanks,
> > > > > > Fedor
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> > devel(a)ovirt.org
> > > > >
> > > > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > > > Subject: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > > > package?
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > Resolved through installing engine on Fedora 30. From what
I
> > > > understand,
> > > > > > CentOS 7 is not supported anymore.
> > > > > >
> > > > > > Fedor
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Martin Perina" < mperina(a)redhat.com
>
> > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com
>, "Dana Elfassy" <
> > > > > > delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >, "Eyal
> > Shenitzky"
> > > > <
> > > > > > eshenitz(a)redhat.com >
> > > > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > > ansible-runner-service-dev
> > > > > > package?
> > > > > >
> > > > > > Hi Fedor,
> > > > > >
> > > > > > ansible-runner-service-dev package is available from
> > > > > >
> > > > > >
> > > > >
> > > >
> >
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > > > repos which is included in ovirt-master-release package,
which
> > > > > > includes all repositories necessary for oVirt development:
> > > > > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > >
> > > > > > Was your issue resolved or not?
> > > > > >
> > > > > > Regards,
> > > > > > Martin
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
> > eshenitz(a)redhat.com
> > > > >
> > > > > > wrote:
> > > > > >
> > > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com
>
> > > > > > >
> > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
> > bzlotnik(a)redhat.com >
> > > > > wrote:
> > > > > > >
> > > > > > >> ansible-runner was added in 4.4, you shouldn't
need in 4.3
> > > > > > >>
> > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov
<
> > > > fgavrilo(a)redhat.com >
> > > > > > >> wrote:
> > > > > > >> >
> > > > > > >> > Hi Sandro,
> > > > > > >> >
> > > > > > >> > Thanks for the suggestion, but it seems to
not help much.
> > > > > > >> >
> > > > > > >> > ansible-runner-service-dev still can't be
found, I checked
> > repos
> > > > > that
> > > > > > >> are installed from
> > > > > > >>
> > > >
https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > >> and haven't found similarly names packages
either...
> > > > > > >> >
> > > > > > >> > $ sudo yum install
ansible-runner-service-dev
> > > > > > >> > Loaded plugins: fastestmirror
> > > > > > >> > Repository centos-sclo-rh-release is listed
more than
once in
> > the
> > > > > > >> configuration
> > > > > > >> > Repository sac-gluster-ansible is listed more
than once in
> > the
> > > > > > >> configuration
> > > > > > >> > Determining fastest mirrors
> > > > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > > > >>
> > > > > > >> | 30 kB 00:00:00
> > > > > > >> > ovirt-master-epel/x86_64/metalink
> > > > > > >>
> > > > > > >> | 30 kB 00:00:00
> > > > > > >> > * base: ftp.sh.cvut.cz
> > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > > > >> > * extras: ftp.sh.cvut.cz
> > > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > > > >> > * ovirt-4.3-snapshot-static:
ftp.plusline.net
> > > > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > > > >> > * ovirt-master-snapshot-static:
ftp.plusline.net
> > > > > > >> > * updates: ftp.sh.cvut.cz
> > > > > > >> > base
> > > > > > >>
> > > > > > >> | 3.6 kB 00:00:00
> > > > > > >> > centos-opstools-release
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > centos-ovirt-common-testing
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-ovirt44-testing
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-qemu-ev-release
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-sclo-rh
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > centos-sclo-rh-release
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > centos-sclo-sclo
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > epel-apache-maven
> > > > > > >>
> > > > > > >> | 3.3 kB 00:00:00
> > > > > > >> > extras
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-gluster6
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-opstools
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-ovirt43
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-qemu-ev
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-epel
> > > > > > >>
> > > > > > >> | 5.3 kB 00:00:00
> > > > > > >> > ovirt-4.3-snapshot
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-4.3-snapshot-static
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-4.3-virtio-win-latest
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-centos-gluster6
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-master-centos-opstools-testing
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-master-epel
> > > > > > >>
> > > > > > >> | 5.3 kB 00:00:00
> > > > > > >> > ovirt-master-snapshot
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-snapshot-static
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-virtio-win-latest
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > sac-gluster-ansible
> > > > > > >>
> > > > > > >> | 3.3 kB 00:00:00
> > > > > > >> > updates
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > (1/32): base/7/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 165 kB 00:00:00
> > > > > > >> > (2/32): base/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.0 MB 00:00:00
> > > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 4.2 MB 00:00:00
> > > > > > >> > (4/32):
centos-qemu-ev-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 9.3 kB 00:00:00
> > > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 344 kB 00:00:00
> > > > > > >> > (6/32):
centos-ovirt44-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 1.1 kB 00:00:01
> > > > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 164 kB 00:00:00
> > > > > > >> > (8/32):
centos-opstools-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 429 kB 00:00:01
> > > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 101 kB 00:00:01
> > > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 116 kB 00:00:00
> > > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 73 kB 00:00:00
> > > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 90 kB 00:00:00
> > > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 5.0 kB 00:00:01
> > > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > > > >>
> > > > > > >> | 1.0 MB 00:00:00
> > > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 429 kB 00:00:00
> > > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 211 kB 00:00:00
> > > > > > >> > (17/32):
ovirt-4.3-snapshot-static/7/primary_db
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > > > >>
> > > > > > >> | 109 kB 00:00:00
> > > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 116 kB 00:00:00
> > > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 90 kB 00:00:00
> > > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > > > >>
> > > > > > >> | 1.0 MB 00:00:00
> > > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > > > >>
> > > > > > >> | 54 kB 00:00:00
> > > > > > >> > (24/32):
ovirt-4.3-virtio-win-latest/primary_db
> > > > > > >>
> > > > > > >> | 7.6 kB 00:00:01
> > > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
> > > > > > >>
> > > > > > >> | 4.6 kB 00:00:00
> > > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
> > > > > > >>
> > > > > > >> | 7.6 kB 00:00:00
> > > > > > >> > (28/32):
centos-sclo-rh-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 4.2 MB 00:00:03
> > > > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (30/32):
> > ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 611 kB 00:00:01
> > > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 2.3 kB 00:00:00
> > > > > > >> > (32/32):
sac-gluster-ansible/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 13 kB 00:00:00
> > > > > > >> > No package ansible-runner-service-dev
available.
> > > > > > >> > Error: Nothing to do
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > Fedor
> > > > > > >> >
> > > > > > >> > ----- Original Message -----
> > > > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
> > > > > devel(a)ovirt.org >
> > > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > > > >> > Subject: Re: [ovirt-devel] Re: what's up
with
> > > > > > >> ansible-runner-service-dev package?
> > > > > > >> >
> > > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39
Fedor Gavrilov <
> > > > > > >> fgavrilo(a)redhat.com >
> > > > > > >> > ha scritto:
> > > > > > >> >
> > > > > > >> > > Thanks for the response, Eyal!
> > > > > > >> > >
> > > > > > >> > > I already had ovirt-master repo
installed, but updated
> > > > everything
> > > > > > >> just in
> > > > > > >> > > case.
> > > > > > >> > > I even tried both yum and dnf (since yum
on centos was
> > giving
> > > > me
> > > > > > lots
> > > > > > >> of
> > > > > > >> > > grief before and I learned their
behaviour differs,
> > especially
> > > > > when
> > > > > > it
> > > > > > >> > > comes to bugs) but none works...
> > > > > > >> > >
> > > > > > >> > > >No package
ansible-runner-service-dev available.
> > > > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > > > >> > >
> > > > > > >> > > Fedor
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > Looks like you're trying to install
ovirt-master-snapshot
on
> > el7.
> > > > > > >> > It won't work.
> > > > > > >> > Master is not supporting el7 anymore.
> > > > > > >> > You can use 4.3 snapshot rpm at :
> > > > > > >> >
> > > > >
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > >> if
> > > > > > >> > you need to stay on el7.
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > > ----- Original Message -----
> > > > > > >> > > From: "Eyal Shenitzky" <
eshenitz(a)redhat.com >
> > > > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > >> > > Cc: "devel" <
devel(a)ovirt.org >
> > > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16
PM
> > > > > > >> > > Subject: Re: [ovirt-devel] what's up
with
> > > > > ansible-runner-service-dev
> > > > > > >> > > package?
> > > > > > >> > >
> > > > > > >> > > Hi Fedor,
> > > > > > >> > >
> > > > > > >> > > Please try:
> > > > > > >> > > 1. dnf install
> > > > > > >> > >
> > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > > >> > > 2. dnf update
> > > > > > >> > > 3. dnf install
ansible-runner-service-dev
> > > > > > >> > > 4. flow the instruction from thread
'New dependency for
> > > > > development
> > > > > > >> > > environment'
> > > > > > >> > > The
> > > > > > >> > >
> > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor
Gavrilov <
> > > > fgavrilo(a)redhat.com
> > > > > >
> > > > > > >> wrote:
> > > > > > >> > >
> > > > > > >> > > > Hi everyone,
> > > > > > >> > > >
> > > > > > >> > > > After I screwed up my dev
environment beyond repair I
> > have to
> > > > > set
> > > > > > >> it up
> > > > > > >> > > > again and I see something I
haven't last time (CentOS
7):
> > > > > > >> > > >
> > > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > > > >> > > > Loaded plugins: fastestmirror
> > > > > > >> > > > Loading mirror speeds from cached
hostfile
> > > > > > >> > > > * base: mirror.hosting90.cz
> > > > > > >> > > > * centos-sclo-rh:
mirror.hosting90.cz
> > > > > > >> > > > * centos-sclo-sclo:
mirror.hosting90.cz
> > > > > > >> > > > * extras: mirror.hosting90.cz
> > > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
> > > > > > >> > > > * ovirt-master-snapshot:
ftp.nluug.nl
> > > > > > >> > > > * ovirt-master-snapshot-static:
ftp.nluug.nl
> > > > > > >> > > > * updates: mirror.hosting90.cz
> > > > > > >> > > > No package
ansible-runner-service-dev available.
> > > > > > >> > > >
> > > > > > >> > > > Maybe something's missing from
my notes, but where
did it
> > go?
> > > > > > >> Should I
> > > > > > >> > > add
> > > > > > >> > > > some repo?
> > > > > > >> > > >
> > > > > > >> > > > Fedor
> > > > > > >> > > >
_______________________________________________
> > > > > > >> > > > Devel mailing list --
devel(a)ovirt.org
> > > > > > >> > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > >> > > > Privacy Statement:
> > https://www.ovirt.org/privacy-policy.html
> > > > > > >> > > > oVirt Code of Conduct:
> > > > > > >> > > >
> > https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > > > List Archives:
> > > > > > >> > > >
> > > > > > >> > >
> > > > > > >>
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > > > >> > > >
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > > --
> > > > > > >> > > Regards,
> > > > > > >> > > Eyal Shenitzky
> > > > > > >> > >
_______________________________________________
> > > > > > >> > > Devel mailing list -- devel(a)ovirt.org
> > > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > >> > > Privacy Statement:
> > https://www.ovirt.org/privacy-policy.html
> > > > > > >> > > oVirt Code of Conduct:
> > > > > > >> > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > > List Archives:
> > > > > > >> > >
> > > > > > >>
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > > > >> > >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > --
> > > > > > >> >
> > > > > > >> > Sandro Bonazzola
> > > > > > >> >
> > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D
RHV
> > > > > > >> >
> > > > > > >> > Red Hat EMEA < https://www.redhat.com/
>
> > > > > > >> >
> > > > > > >> > sbonazzo(a)redhat.com
> > > > > > >> > < https://www.redhat.com/ >*Red Hat
respects your work
life
> > > > balance.
> > > > > > >> > Therefore there is no need to answer this
email out of
your
> > > > office
> > > > > > >> hours.
> > > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578
>*
> > > > > > >> >
_______________________________________________
> > > > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > >> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > >> > oVirt Code of Conduct:
> > > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > List Archives:
> > > > > > >>
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > > > >> _______________________________________________
> > > > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > > > >> To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > >> oVirt Code of Conduct:
> > > > > > >>
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> List Archives:
> > > > > > >>
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Regards,
> > > > > > > Eyal Shenitzky
> > > > > > > _______________________________________________
> > > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > > oVirt Code of Conduct:
> > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > List Archives:
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Martin Perina
> > > > > > Manager, Software Engineering
> > > > > > Red Hat Czech s.r.o.
> > > > > > _______________________________________________
> > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > oVirt Code of Conduct:
> > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > List Archives:
> > > > > >
> > > > >
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > > > >
> > > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > >
> > > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> > > >
> > >
> > >
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
> >
> >
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
> >
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5...
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJ...
--
Regards,
Eyal Shenitzky
12:35 p.m.
On Mon, Mar 23, 2020 at 11:29 AM Eyal Shenitzky <eshenitz(a)redhat.com> wrote:
I encounter that problem when I didn't configure my ansible
runner as
needed
Please check that your conf file (/etc/ansible-runner-service/config.yaml)
is as follow:
---
*version: 1 playbooks_root_dir:
'/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
ssh_private_key:
'/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
port: 50001 target_user: root*
If it still doesn't work try doing what I suggested with the breakpoint as
a workaround.
On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
> I just tried installing fedora 30 host with no pre-installed cockpit,
> just ovirt-release-master repo. Same as always:
>
> 2020-03-20 14:01:30,134+01 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID:
> VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute
> Ansible host-deploy role: Internal server error, please check Ansible
> runner error log.. Please check logs for more details:
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.
>
> No logs as usual. The error must be on the engine side somewhere...
>
> ----- Original Message -----
> From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> To: "Nir Soffer" <nsoffer(a)redhat.com>
> Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<
> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
> Sent: Thursday, March 19, 2020 4:20:23 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Thanks for the response, Nir.
>
> >You host installed without SSH server enabled?
> I've been virtualizing both engine and host vm since I joined the team,
> so enabling ssh access is the first thing I do after OS is installed.
>
> >Not sure why you need cockpit.
> >But you need:
> >sudo dnf install
> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> I did install ovirt-release-master rpm on the host and somehow managed to
> not copy that (facepalm). But believe me it's there.
> Regarding cockpit, I was following what's written in
> https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts...
>
> >Why not:
> >sudo yum install
> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it
> would silently fail when you try installing from the URL :D
>
> >Did you to add centos 7.7 host? 8.1?
> Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host
> (that's the lengths I went to get this thing working!). Both fail.
>
> >Look at the full half of the glass, you have engine.
> Nice one. Though I'm afraid that part might be poisoned since host
> configuration that worked for me for a year now instantly fails no matter
> what OS is used...
>
> Fedor
>
> ----- Original Message -----
> From: "Nir Soffer" <nsoffer(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Martin Perina" <mperina(a)redhat.com>, "Liran Rotenberg"
<
> lrotenbe(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <
> devel(a)ovirt.org>
> Sent: Thursday, March 19, 2020 2:31:39 AM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> >
> > Wow. I did not expect that, but after clean setup the error is still
> there.
> > I can't add fedora 30 host to fedora 30 engine.
> >
> > Here is a full bash history for the host machine since OS was installed:
> >
> > sudo yum update
>
> Good
>
> > sudo systemctl enable sshd
>
> You host installed without SSH server enabled?
>
> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> > sudo nmcli connection mod ens3 ipv4.method manual
>
> You can configure the network from the installer, less painful.
>
> > sudo vi /etc/hosts
> > sudo poweroff
> > sudo yum install cockpit-ovirt-dashboard
> > sudo systemctl enable cockpit.socket --now
>
> Not sure why you need cockpit.
>
> But you need:
>
> sudo dnf install
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> >
> > Same for the engine machine (I was installing dependencies separetely
> because 1. yum bugs & 2. I was checking if versions are correct one by one):
> >
> > sudo yum update
> > sudo systemctl enable sshd
> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24
> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> > sudo nmcli connection mod ens3 ipv4.method manual
> > sudo vi /etc/hosts
> > sudo poweroff
> > sudo yum install java-11-openjdk-devel
> > sudo yum install java-1.8.0-openjdk-headless
> > sudo yum install mailcap
> > sudo yum install unzip
> > sudo yum install openssl
> > sudo yum install bind-utils
> > sudo yum install postgresql-server
> > sudo yum install postgresql
> > sudo yum install postgresql-contrib
> > sudo yum install python2-dateutil
> > sudo yum install python3-dateutil
> > sudo yum install python2-m2crypto
> > sudo yum install python3-m2crypto
> > sudo yum install python2-psycopg2
> > sudo yum install python3-psycopg2
> > sudo yum install python2-jinja2
> > sudo yum install python3-jinja2
> > sudo yum install python2-libxml2
> > sudo yum install python3-libxml2
> > sudo yum install python2-daemon
> > sudo yum install python3-daemon
>
> > wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > sudo yum install ./ovirt-release-master.rpm -y
>
> Why not:
>
> sudo yum install
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Also, you want to instal this first - before you install other
> packages, so you get packages
> from ovirt dependencies.
>
> > sudo yum install otopi
> > sudo yum install python3-ovirt-setup-lib
> > sudo yum install maven
> > sudo yum install ansible
> > sudo yum install ansible-runner-service-dev
> > sudo yum install ovirt-ansible-roles
> > sudo yum install ovirt-engine-metrics
> > sudo yum install python3-ovirt-engine-sdk4
> > sudo yum install pyflakes
> > sudo yum install python-pep8
> > sudo yum install python3-docker
> > sudo yum install python3-isort
> > sudo yum install gcc
> > sudo yum install python2-devel
> > sudo yum install systemd-python
> > sudo yum install python-webob
> > sudo yum install redhat-rpm-config
> > sudo yum install scl-utils
> > sudo yum install ovirt-imageio-common
>
> Not needed, the ovirt-imageio-proxy will bring it.
>
> > sudo yum install make
> > sudo yum install python-requests
> > sudo yum install python-subprocess32
> > sudo alternatives --config java
> > sudo yum install ovirt-engine-wildfly
> > sudo yum install ovirt-engine-wildfly-overlay
> > sudo vi /etc/security/limits.d/10-nofile.conf
> > sudo firewall-cmd --add-port=8080/tcp --permanent
> > sudo firewall-cmd --add-port=8443/tcp --permanent
> > sudo firewall-cmd --add-port=8787/tcp --permanent
> > sudo firewall-cmd --add-port=5432/tcp --permanent
> > sudo firewall-cmd --add-port=54323/tcp --permanent
> > sudo firewall-cmd --reload
> > sudo postgresql-setup --initdb --unit postgresql
> > sudo vi /var/lib/pgsql/data/pg_hba.conf
> > sudo vi /var/lib/pgsql/data/postgresql.conf
> > sudo systemctl enable postgresql --now
> > sudo systemctl status postgresql
> > sudo su - postgres -c "psql -d template1"
> > sudo su - postgres -c "psql -d engine"
>
> sudo -u postgres -i ?
>
> > sudo vi /etc/ansible-runner-service/config.yaml
> > sudo systemctl enable ansible-runner-service --now
> > sudo systemctl status ansible-runner-service
> > sudo yum install git
> > mkdir ~/git && cd ~/git
> > git clone git://gerrit.ovirt.org/ovirt-imageio
> > git clone git://gerrit.ovirt.org/ovirt-engine
> > vi ~/.bashrc
> > sudo reboot
> > cd ovirt-engine/
> > make clean install-dev PREFIX="/home/apple/ovirt-engine"
SKIP_CHECKS=1
> > cd ~/git/ovirt-imageio/
> > make
> > cd proxy/
> > make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
> > ~/ovirt-engine/bin/engine-setup
> > ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
> > vi ~/.bashrc
> > vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
> > sudo poweroff
> >
> > I don't know what's wrong. It does not work.
>
> Look at the full half of the glass, you have engine.
>
> Did you to add centos 7.7 host? 8.1?
>
> > ----- Original Message -----
> > From: "Martin Perina" <mperina(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana
Elfassy" <
> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
> > Sent: Wednesday, March 18, 2020 3:15:15 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev package?
> >
> > On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> >
> > > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder
> why I
> > > haven't got this error sooner.
> > > Also, given the workaround, does that mean that ansible-lint is
> optional?
> > >
> >
> > Yes, same as pep8, pyflake and other build check tools
> >
> > >
> > > ----- Original Message -----
> > > From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > > Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> > > Sent: Wednesday, March 18, 2020 2:21:14 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > >
> > >
> > > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > >
> > >
> > > Ok, thanks for the reaction :)
> > >
> > > Getting back to the main topic, can anyone (please) try to compile the
> > > engine master now?
> > > That's what I get when I try to:
> > >
> > > [602] Don't compare to empty string
> > >
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
> > >
> > > when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
> > >
> > > [602] Don't compare to empty string
> > >
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
> > >
> > > when: hosted_engine_vm_cluster_name_result.stdout | trim == ""
or
> > > hosted_engine_vm_cluster_name_result.stdout is undefined
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
> > >
> > > Task/Handler: Install collectd package
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
> > >
> > > Task/Handler: Install collectd plugins on engine
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
> > >
> > > Task/Handler: Install collectd plugins on hosts
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
> > >
> > > Task/Handler: Install collectd write_syslog plugin
> > >
> > > [303] systemctl used in place of systemd module
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
> > >
> > > Task/Handler: Check if fluentd is running
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
> > >
> > > - fluentd_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
> > >
> > > changed_when: fluentd_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
> > >
> > > - fluentd_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
> > >
> > > when: fluentd_is_running|default(false)|bool == false
> > >
> > > [303] systemctl used in place of systemd module
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
> > >
> > > Task/Handler: Check if rsyslog is running
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
> > >
> > > - rsyslog_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
> > >
> > > changed_when: rsyslog_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
> > >
> > > - rsyslog_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
> > >
> > > when: rsyslog_is_running|default(false)|bool == false
> > >
> > > [303] systemctl used in place of systemd module
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
> > >
> > > Task/Handler: Check if collectd is running
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
> > >
> > > Task/Handler: Install fluentd package
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
> > >
> > > Task/Handler: Install fluentd engine plugins
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
> > >
> > > Task/Handler: Install fluentd host plugins
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
> > >
> > > when: stat_result.stat.exists == True
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
> > >
> > > Task/Handler: Get ovirt_engine_fqdn
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
> > >
> > > Task/Handler: Get ovirt_engine_db_name
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
> > >
> > > Task/Handler: Get ovirt_engine_db_user
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
> > >
> > > Task/Handler: Get ovirt_engine_history_db_name
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
> > >
> > > Task/Handler: Get ovirt_engine_history_db_user
> > >
> > > make[1]: *** [Makefile:401: validations] Error 2
> > > make[1]: Leaving directory '/home/apple/git/ovirt-engine'
> > > make: *** [Makefile:584: all-dev] Error 2
> > >
> > > An extensive lecture from ansible, but what is this even about?
> > > https://bugzilla.redhat.com/show_bug.cgi?id=1804268
> > >
> > >
> > >
> > > ...
> > >
> > >
> > > ----- Original Message -----
> > > From: "Nir Soffer" < nsoffer(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana
Elfassy" <
> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > > Sent: Wednesday, March 18, 2020 11:45:28 AM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > > >
> > > > For the time being I'm doing super careful clean installation of
> both
> > > engine and host in hopes of getting dev env working again... results
> are
> > > yet to be seen.
> > > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt
> master
> > > rpm for Fedora 30. Correct name for the package is
> > > python3-ovirt-engine-sdk4. And more examples like that with random
> package
> > > renamings.
> > > >
> > > > README definitely needs an update. If you ask me, I would rather
> provide
> > > users with a single version (Fedora 30 only) of dev installation docs
> that
> > > works rather than with two versions that don't.
> > >
> > > Please do the update.
> > >
> > > Hopefully you will have more luck, my last README patch was abandoned
> > > after
> > > it was neglected by engine maintainers.
> > > https://gerrit.ovirt.org/c/106467/
> > >
> > > > Are there any reasons to keep CentOS 7 info there that's
irrelevant
> now?
> > >
> > > It should be dropped now.
> > >
> > > > I can rework the docs for FC30 eventually if no one minds.
> > >
> > > There is already a working fedora 30 instructions in the bottom of the
> > > readme. It used to
> > > work when Amit added it.
> > >
> > > > Or, if plans are to move to CentOS 8, maybe another brave soul can
> do
> > > that.
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > > > Sent: Tuesday, March 17, 2020 1:13:48 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > package?
> > > >
> > > >
> > > >
> > > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com >
> > > wrote:
> > > >
> > > >
> > > > I just tried installing on Fedora 30 host and error stays the same,
> so
> > > it's probably not as OS. Might try clean setup next, what else...
> > > >
> > > > Liran, do you see anything of interest when you journalctl -u
> > > ansible-runner-service | grep fatal ?
> > > > No, we do see a trackback on the command pointing out to
> > > python3.7/site-packages/runner_service/services/jobs.py
> > > > But, because breakpoint that only makes things slower, I think
it's
> > > timing/locking issue somehow.
> > > >
> > > >
> > > >
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana
Elfassy" <
> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > > > Sent: Tuesday, March 17, 2020 12:49:32 PM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > > >
> > > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com >
> > > wrote:
> > > >
> > > > > I tried installing python 2 versions of some dependencies in
> addition
> > > to
> > > > > python 3 (as
> > > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > > > > is not clear about it at all. on Fedora 30 default versions of
> these
> > > > > libraries you get when not specifying python vesion in the name
> are
> > > python
> > > > > 2.)
> > > > > Now error looks slightly different :'D
> > > > >
> > > > > 2020-03-17 11:08:27,294+01 ERROR
> > > > >
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > > > > VDS_INSTALL_FAILED(505), Host banana installation failed.
Internal
> > > server
> > > > > error, please check Ansible runner error log..
> > > > >
> > > > > Everything else stays the same, host install fails almost
> immediately.
> > > > > Does someone have any notes for Fedora 30 install they can
share?
> > > > >
> > > > I start seeing it too:
> > > > ansible-runner-service-dev-1.0.1-1.fc30.noarch
> > > > python3-ansible-runner-1.3.4-2.fc30.noarch
> > > > engine:
> > > > http://pastebin.test.redhat.com/845373
> > > > of course no ansible log..
> > > > This is what journalctl show:
> > > > http://pastebin.test.redhat.com/845375
> > > >
> > > > After doing some debugging in the engine, after setting a
> breakpoint in
> > > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
> > > Step-Over
> > > > until the execution (lines 139-147) it does work. Without breaking
> point
> > > > and making things slower it throws the error.
>
Here^
> > >
> > > > >
> > > > > Thanks,
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 3:52:47 PM
> > > > > Subject: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > Sorry, my bad, it was just under my nose. Systemctl is not aware
> of
> > > > > gunicorn-3, but when I check journalctl for
> ansible-runner-service I
> > > see
> > > > > the following:
> > > > >
> > > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner
Service.
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2992]
> > > > > [INFO] Starting gunicorn 19.9.0
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2992]
> > > > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2992]
> > > > > [INFO] Using worker: sync
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2995]
> > > > > [INFO] Booting worker with pid: 2995
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2997]
> > > > > [INFO] Booting worker with pid: 2997
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
> configuration
> > > > > options from /etc/ansible-runner-service/config.yaml
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
> playbooks_root_dir
> > > to
> > > > >
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to
> root
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
ssh_private_key
> to
> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime
> overrides
> > > from
> > > > > environment variables
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration
settings
> > > > > overridden
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
> configuration
> > > > > options from /etc/ansible-runner-service/config.yaml
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
> playbooks_root_dir
> > > to
> > > > >
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to
> root
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
ssh_private_key
> to
> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime
> overrides
> > > from
> > > > > environment variables
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration
settings
> > > > > overridden
> > > > >
> > > > > Is that any suspicious? :)
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 3:36:40 PM
> > > > > Subject: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > >
> > > > >
> > > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > > >
> > > > > wrote:
> > > > >
> > > > >
> > > > > Nothing since there is no such service (or similarly named).
> > > > > Package python3-gunicorn is installed though.
> > > > >
> > > > > After you start ansible-runner-service service, you should see
> similar
> > > > > logs in journalctl:
> > > > >
> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
> +0100]
> > > > > [1386] [INFO] Starting gunicorn 19.9.0
> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
> +0100]
> > > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
> +0100]
> > > > > [1386] [INFO] Using worker: sync
> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
> +0100]
> > > > > [1496] [INFO] Booting worker with pid: 1496
> > > > > And more if you execute some action from engine (like install
new
> host
> > > or
> > > > > upgrade a host)
> > > > >
> > > > >
> > > > >
> > > > > So does that mean that something was supposed to register it as
a
> > > service
> > > > > but did not?
> > > > >
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 3:13:03 PM
> > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > > >
> > > > > wrote:
> > > > >
> > > > > > FC30 dev env engine indeed :) I've done this before on
other
> OS, so
> > > > > unless
> > > > > > there is a blindspot somewhere in my eye it should be
configured
> > > fine.
> > > > > >
> > > > > > [apple@apple ~]$ sudo systemctl status
ansible-runner-service
> > > > > > ● ansible-runner-service.service - Ansible Runner Service
> > > > > > Loaded: loaded
> > > (/usr/lib/systemd/system/ansible-runner-service.service;
> > > > > > enabled; vendor preset: disabled)
> > > > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET;
> 16min
> > > ago
> > > > > > Main PID: 909 (gunicorn-3)
> > > > > > Tasks: 9 (limit: 4915)
> > > > > > Memory: 193.4M
> > > > > > CGroup: /system.slice/ansible-runner-service.service
> > > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
> > > > > > -w 2 runner_service.wsgi:application
> > > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
> > > > > > -w 2 runner_service.wsgi:application
> > > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
> > > > > > -w 2 runner_service.wsgi:application
> > > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > > --private-key
> > > > > >
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > > --private-key
> > > > > >
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s
-o
> > > > > > StrictHostKeyChecking=no -o Port=22 -o
> > > > > >
> > > > >
> > >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> > >
> > > > >
> > > > > > -o KbdInteractiveAu>
> > > > > >
> > > > > > And the config:
> > > > > >
> > > > > > ---
> > > > > > version: 1
> > > > > >
> > > > > > # playbooks_root_dir
> > > > > > # location of the playbooks that the service will start
> > > > > > playbooks_root_dir:
> > > > > >
> > > > >
> > >
> '/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> > >
> > > > >
> > > > > > # port
> > > > > > # tcp port for the service to listen to
> > > > > > port: 50001
> > > > > > #
> > > > > > # ip_address
> > > > > > # Specific IP address to bind to
> > > > > > # ip_address: '0.0.0.0'
> > > > > > target_user: root
> > > > > > #event_cache_size: 3
> > > > > > ssh_private_key:
> > > > > >
> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > > > > >
> > > > > > /home/apple/ovirt-engine is where engine is dev-installed.
Not
> sure
> > > what
> > > > > > else to check now...
> > > > > >
> > > > >
> > > > > Anything strange in journalctl for gunicorn-3 service?
> > > > >
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Martin Perina" < mperina(a)redhat.com
>
> > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> > > devel(a)ovirt.org >
> > > > > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > > package?
> > > > > >
> > > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > > >
> > > > > > wrote:
> > > > > >
> > > > > > > Actually, it was too early for me to celebrate.
> > > > > > >
> > > > > > > On Fedora 30, the engine compiles and runs fine, but
when I
> try
> > > adding
> > > > > > the
> > > > > > > host installation fails almost immediately and I get
the
> following
> > > > > errors
> > > > > > > in the engine logs:
> > > > > > >
> > > > > > > ERROR
> > > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01]
Host
> > > installation
> > > > > > > failed for host
'6402d350-69de-4181-bfc1-50e0e79c8228',
> 'banana':
> > > > > Failed
> > > > > > to
> > > > > > > execute Ansible host-deploy role: Internal server
error,
> please
> > > check
> > > > > > > Ansible runner error log.. Please check logs for more
details:
> > > > > > >
> > > > > >
> > > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > >
> > > > >
> > > > > > >
> > > > > > > There is nothing else. There is no file
> > > > > > >
> > > > > >
> > > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > >
> > > > >
> > > > > > > Snapshot I'm using for the host is the same that
worked just
> fine
> > > when
> > > > > > > engine was running on CentOS 7 and is CentOS 7 itself.
Is
> that an
> > > > > issue?
> > > > > > >
> > > > > >
> > > > > > As you mentioned building engine I assume you are using
engine
> in
> > > dev
> > > > > env
> > > > > > on FC30, right? If so, have you manually configured
> > > > > ansible-runner-service
> > > > > > for dev env as mentioned in
> > > > > >
> > > > > >
> > > > >
> > >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > > > > ?
> > > > > >
> > > > > >
> > > > > > > Thanks,
> > > > > > > Fedor
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > > To: "Martin Perina" < mperina(a)redhat.com
>
> > > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com
>, "devel" <
> > > devel(a)ovirt.org
> > > > > >
> > > > > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > > > > Subject: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > > > package?
> > > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > Resolved through installing engine on Fedora 30. From
what I
> > > > > understand,
> > > > > > > CentOS 7 is not supported anymore.
> > > > > > >
> > > > > > > Fedor
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Martin Perina" < mperina(a)redhat.com
>
> > > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com
>, "Dana Elfassy" <
> > > > > > > delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >, "Eyal
> > > Shenitzky"
> > > > > <
> > > > > > > eshenitz(a)redhat.com >
> > > > > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > > > ansible-runner-service-dev
> > > > > > > package?
> > > > > > >
> > > > > > > Hi Fedor,
> > > > > > >
> > > > > > > ansible-runner-service-dev package is available from
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > > > > repos which is included in ovirt-master-release
package, which
> > > > > > > includes all repositories necessary for oVirt
development:
> > > > > > >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > > >
> > > > > > > Was your issue resolved or not?
> > > > > > >
> > > > > > > Regards,
> > > > > > > Martin
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
> > > eshenitz(a)redhat.com
> > > > > >
> > > > > > > wrote:
> > > > > > >
> > > > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com
>
> > > > > > > >
> > > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
> > > bzlotnik(a)redhat.com >
> > > > > > wrote:
> > > > > > > >
> > > > > > > >> ansible-runner was added in 4.4, you
shouldn't need in 4.3
> > > > > > > >>
> > > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov
<
> > > > > fgavrilo(a)redhat.com >
> > > > > > > >> wrote:
> > > > > > > >> >
> > > > > > > >> > Hi Sandro,
> > > > > > > >> >
> > > > > > > >> > Thanks for the suggestion, but it seems
to not help much.
> > > > > > > >> >
> > > > > > > >> > ansible-runner-service-dev still
can't be found, I
> checked
> > > repos
> > > > > > that
> > > > > > > >> are installed from
> > > > > > > >>
> > > > >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > > >> and haven't found similarly names packages
either...
> > > > > > > >> >
> > > > > > > >> > $ sudo yum install
ansible-runner-service-dev
> > > > > > > >> > Loaded plugins: fastestmirror
> > > > > > > >> > Repository centos-sclo-rh-release is
listed more than
> once in
> > > the
> > > > > > > >> configuration
> > > > > > > >> > Repository sac-gluster-ansible is listed
more than once
> in
> > > the
> > > > > > > >> configuration
> > > > > > > >> > Determining fastest mirrors
> > > > > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > > > > >>
> > > > > > > >> | 30 kB 00:00:00
> > > > > > > >> > ovirt-master-epel/x86_64/metalink
> > > > > > > >>
> > > > > > > >> | 30 kB 00:00:00
> > > > > > > >> > * base: ftp.sh.cvut.cz
> > > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > > > > >> > * extras: ftp.sh.cvut.cz
> > > > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > > > > >> > * ovirt-4.3-snapshot-static:
ftp.plusline.net
> > > > > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > > > > >> > * ovirt-master-snapshot:
ftp.plusline.net
> > > > > > > >> > * ovirt-master-snapshot-static:
ftp.plusline.net
> > > > > > > >> > * updates: ftp.sh.cvut.cz
> > > > > > > >> > base
> > > > > > > >>
> > > > > > > >> | 3.6 kB 00:00:00
> > > > > > > >> > centos-opstools-release
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > centos-ovirt-common-testing
> > > > > > > >>
> > > > > > > >> | 3.4 kB 00:00:00
> > > > > > > >> > centos-ovirt44-testing
> > > > > > > >>
> > > > > > > >> | 3.4 kB 00:00:00
> > > > > > > >> > centos-qemu-ev-release
> > > > > > > >>
> > > > > > > >> | 3.4 kB 00:00:00
> > > > > > > >> > centos-sclo-rh
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > centos-sclo-rh-release
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > centos-sclo-sclo
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > epel-apache-maven
> > > > > > > >>
> > > > > > > >> | 3.3 kB 00:00:00
> > > > > > > >> > extras
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-centos-gluster6
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-centos-opstools
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-centos-ovirt43
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-centos-qemu-ev
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-epel
> > > > > > > >>
> > > > > > > >> | 5.3 kB 00:00:00
> > > > > > > >> > ovirt-4.3-snapshot
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-4.3-snapshot-static
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-4.3-virtio-win-latest
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-master-centos-gluster6
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-master-centos-opstools-testing
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-master-epel
> > > > > > > >>
> > > > > > > >> | 5.3 kB 00:00:00
> > > > > > > >> > ovirt-master-snapshot
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-master-snapshot-static
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-master-virtio-win-latest
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > sac-gluster-ansible
> > > > > > > >>
> > > > > > > >> | 3.3 kB 00:00:00
> > > > > > > >> > updates
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > (1/32): base/7/x86_64/group_gz
> > > > > > > >>
> > > > > > > >> | 165 kB 00:00:00
> > > > > > > >> > (2/32): base/7/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 6.0 MB 00:00:00
> > > > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 4.2 MB 00:00:00
> > > > > > > >> > (4/32):
centos-qemu-ev-release/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 9.3 kB 00:00:00
> > > > > > > >> > (5/32):
centos-sclo-sclo/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 344 kB 00:00:00
> > > > > > > >> > (6/32):
centos-ovirt44-testing/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 1.1 kB 00:00:01
> > > > > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 164 kB 00:00:00
> > > > > > > >> > (8/32):
centos-opstools-release/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 429 kB 00:00:01
> > > > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 101 kB 00:00:01
> > > > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 116 kB 00:00:00
> > > > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 73 kB 00:00:00
> > > > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > > > > >>
> > > > > > > >> | 90 kB 00:00:00
> > > > > > > >> > (13/32):
epel-apache-maven/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 5.0 kB 00:00:01
> > > > > > > >> > (14/32):
ovirt-4.3-epel/x86_64/updateinfo
> > > > > > > >>
> > > > > > > >> | 1.0 MB 00:00:00
> > > > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 429 kB 00:00:00
> > > > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 211 kB 00:00:00
> > > > > > > >> > (17/32):
ovirt-4.3-snapshot-static/7/primary_db
> > > > > > > >>
> > > > > > > >> | 3.4 kB 00:00:00
> > > > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > > > > >>
> > > > > > > >> | 109 kB 00:00:00
> > > > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 116 kB 00:00:00
> > > > > > > >> > (20/32):
ovirt-4.3-epel/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 6.7 MB 00:00:00
> > > > > > > >> > (21/32):
ovirt-master-epel/x86_64/group_gz
> > > > > > > >>
> > > > > > > >> | 90 kB 00:00:00
> > > > > > > >> > (22/32):
ovirt-master-epel/x86_64/updateinfo
> > > > > > > >>
> > > > > > > >> | 1.0 MB 00:00:00
> > > > > > > >> > (23/32):
ovirt-master-snapshot/7/primary_db
> > > > > > > >>
> > > > > > > >> | 54 kB 00:00:00
> > > > > > > >> > (24/32):
ovirt-4.3-virtio-win-latest/primary_db
> > > > > > > >>
> > > > > > > >> | 7.6 kB 00:00:01
> > > > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
> > > > > > > >>
> > > > > > > >> | 4.6 kB 00:00:00
> > > > > > > >> > (26/32):
ovirt-master-epel/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 6.7 MB 00:00:00
> > > > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
> > > > > > > >>
> > > > > > > >> | 7.6 kB 00:00:00
> > > > > > > >> > (28/32):
centos-sclo-rh-release/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 4.2 MB 00:00:03
> > > > > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 6.7 MB 00:00:00
> > > > > > > >> > (30/32):
> > > ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 611 kB 00:00:01
> > > > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 2.3 kB 00:00:00
> > > > > > > >> > (32/32):
sac-gluster-ansible/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 13 kB 00:00:00
> > > > > > > >> > No package ansible-runner-service-dev
available.
> > > > > > > >> > Error: Nothing to do
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > Fedor
> > > > > > > >> >
> > > > > > > >> > ----- Original Message -----
> > > > > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
> > > > > > devel(a)ovirt.org >
> > > > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > > > > >> > Subject: Re: [ovirt-devel] Re: what's
up with
> > > > > > > >> ansible-runner-service-dev package?
> > > > > > > >> >
> > > > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39
Fedor Gavrilov <
> > > > > > > >> fgavrilo(a)redhat.com >
> > > > > > > >> > ha scritto:
> > > > > > > >> >
> > > > > > > >> > > Thanks for the response, Eyal!
> > > > > > > >> > >
> > > > > > > >> > > I already had ovirt-master repo
installed, but updated
> > > > > everything
> > > > > > > >> just in
> > > > > > > >> > > case.
> > > > > > > >> > > I even tried both yum and dnf (since
yum on centos was
> > > giving
> > > > > me
> > > > > > > lots
> > > > > > > >> of
> > > > > > > >> > > grief before and I learned their
behaviour differs,
> > > especially
> > > > > > when
> > > > > > > it
> > > > > > > >> > > comes to bugs) but none works...
> > > > > > > >> > >
> > > > > > > >> > > >No package
ansible-runner-service-dev available.
> > > > > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > > > > >> > >
> > > > > > > >> > > Fedor
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> > Looks like you're trying to install
> ovirt-master-snapshot on
> > > el7.
> > > > > > > >> > It won't work.
> > > > > > > >> > Master is not supporting el7 anymore.
> > > > > > > >> > You can use 4.3 snapshot rpm at :
> > > > > > > >> >
> > > > > >
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > > >> if
> > > > > > > >> > you need to stay on el7.
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > > ----- Original Message -----
> > > > > > > >> > > From: "Eyal Shenitzky"
< eshenitz(a)redhat.com >
> > > > > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > > >> > > Cc: "devel" <
devel(a)ovirt.org >
> > > > > > > >> > > Sent: Tuesday, March 10, 2020
2:24:16 PM
> > > > > > > >> > > Subject: Re: [ovirt-devel]
what's up with
> > > > > > ansible-runner-service-dev
> > > > > > > >> > > package?
> > > > > > > >> > >
> > > > > > > >> > > Hi Fedor,
> > > > > > > >> > >
> > > > > > > >> > > Please try:
> > > > > > > >> > > 1. dnf install
> > > > > > > >> > >
> > > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > > > >> > > 2. dnf update
> > > > > > > >> > > 3. dnf install
ansible-runner-service-dev
> > > > > > > >> > > 4. flow the instruction from thread
'New dependency for
> > > > > > development
> > > > > > > >> > > environment'
> > > > > > > >> > > The
> > > > > > > >> > >
> > > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor
Gavrilov <
> > > > > fgavrilo(a)redhat.com
> > > > > > >
> > > > > > > >> wrote:
> > > > > > > >> > >
> > > > > > > >> > > > Hi everyone,
> > > > > > > >> > > >
> > > > > > > >> > > > After I screwed up my dev
environment beyond repair I
> > > have to
> > > > > > set
> > > > > > > >> it up
> > > > > > > >> > > > again and I see something I
haven't last time
> (CentOS 7):
> > > > > > > >> > > >
> > > > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > > > > >> > > > Loaded plugins: fastestmirror
> > > > > > > >> > > > Loading mirror speeds from
cached hostfile
> > > > > > > >> > > > * base: mirror.hosting90.cz
> > > > > > > >> > > > * centos-sclo-rh:
mirror.hosting90.cz
> > > > > > > >> > > > * centos-sclo-sclo:
mirror.hosting90.cz
> > > > > > > >> > > > * extras: mirror.hosting90.cz
> > > > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
> > > > > > > >> > > > * ovirt-master-snapshot:
ftp.nluug.nl
> > > > > > > >> > > > * ovirt-master-snapshot-static:
ftp.nluug.nl
> > > > > > > >> > > > * updates: mirror.hosting90.cz
> > > > > > > >> > > > No package
ansible-runner-service-dev available.
> > > > > > > >> > > >
> > > > > > > >> > > > Maybe something's missing
from my notes, but where
> did it
> > > go?
> > > > > > > >> Should I
> > > > > > > >> > > add
> > > > > > > >> > > > some repo?
> > > > > > > >> > > >
> > > > > > > >> > > > Fedor
> > > > > > > >> > > >
_______________________________________________
> > > > > > > >> > > > Devel mailing list --
devel(a)ovirt.org
> > > > > > > >> > > > To unsubscribe send an email
to
> devel-leave(a)ovirt.org
> > > > > > > >> > > > Privacy Statement:
> > > https://www.ovirt.org/privacy-policy.html
> > > > > > > >> > > > oVirt Code of Conduct:
> > > > > > > >> > > >
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > >> > > > List Archives:
> > > > > > > >> > > >
> > > > > > > >> > >
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > > > > >> > > >
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> > > --
> > > > > > > >> > > Regards,
> > > > > > > >> > > Eyal Shenitzky
> > > > > > > >> > >
_______________________________________________
> > > > > > > >> > > Devel mailing list --
devel(a)ovirt.org
> > > > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > > >> > > Privacy Statement:
> > > https://www.ovirt.org/privacy-policy.html
> > > > > > > >> > > oVirt Code of Conduct:
> > > > > > > >> > >
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > >> > > List Archives:
> > > > > > > >> > >
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > > > > >> > >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > --
> > > > > > > >> >
> > > > > > > >> > Sandro Bonazzola
> > > > > > > >> >
> > > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA
R&D RHV
> > > > > > > >> >
> > > > > > > >> > Red Hat EMEA < https://www.redhat.com/
>
> > > > > > > >> >
> > > > > > > >> > sbonazzo(a)redhat.com
> > > > > > > >> > < https://www.redhat.com/ >*Red Hat
respects your work
> life
> > > > > balance.
> > > > > > > >> > Therefore there is no need to answer this
email out of
> your
> > > > > office
> > > > > > > >> hours.
> > > > > > > >> > <
https://mojo.redhat.com/docs/DOC-1199578 >*
> > > > > > > >> >
_______________________________________________
> > > > > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > > >> > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > > > >> > oVirt Code of Conduct:
> > > > > > > >>
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > >> > List Archives:
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > > > > >>
_______________________________________________
> > > > > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > > > > >> To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > > >> Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > > > >> oVirt Code of Conduct:
> > > > > > > >>
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > >> List Archives:
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > > > > >>
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Regards,
> > > > > > > > Eyal Shenitzky
> > > > > > > > _______________________________________________
> > > > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > > > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > > > > oVirt Code of Conduct:
> > > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > > List Archives:
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Martin Perina
> > > > > > > Manager, Software Engineering
> > > > > > > Red Hat Czech s.r.o.
> > > > > > > _______________________________________________
> > > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > > oVirt Code of Conduct:
> > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > List Archives:
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > > > > >
> > > > > > >
> > > > > >
> > > > > > --
> > > > > > Martin Perina
> > > > > > Manager, Software Engineering
> > > > > > Red Hat Czech s.r.o.
> > > > > >
> > > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > >
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
> > >
> > >
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
> > >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJ...
>
--
Regards,
Eyal Shenitzky
6:10 p.m.
New subject: what's up with ansible-runner-service-dev package?
Ok, after doing setup again I was able to get past ansible runner problem as it seems. Not
sure what the difference is other than the fact that I install ovirt-master repo first and
thus some dependencies are likely to come from there instead of standard fedora 30 repo.
There seems to be one last thing, though:
2020-03-31 16:00:01,430+02 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c] Host
'banana' is set to Non-Operational, it is missing the following networks:
'ovirtmgmt'
2020-03-31 16:00:01,474+02 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c]
EVENT_ID: VDS_SET_NONOPERATIONAL_NETWORK(519), Host banana does not comply with the
cluster Default networks, the following networks are missing on host: 'ovirtmgmt'
I'm sure I've seen such error some time ago, but can't remember what it might
mean...
Thanks,
Fedor
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Eyal Shenitzky" <eshenitz(a)redhat.com>
Cc: "Fedor Gavrilov" <fgavrilo(a)redhat.com>, "Nir Soffer"
<nsoffer(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <devel(a)ovirt.org>
Sent: Monday, March 23, 2020 10:35:49 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 23, 2020 at 11:29 AM Eyal Shenitzky <eshenitz(a)redhat.com> wrote:
I encounter that problem when I didn't configure my ansible
runner as
needed
Please check that your conf file (/etc/ansible-runner-service/config.yaml)
is as follow:
---
*version: 1 playbooks_root_dir:
'/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
ssh_private_key:
'/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
port: 50001 target_user: root*
If it still doesn't work try doing what I suggested with the breakpoint as
a workaround.
On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
> I just tried installing fedora 30 host with no pre-installed cockpit,
> just ovirt-release-master repo. Same as always:
>
> 2020-03-20 14:01:30,134+01 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID:
> VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute
> Ansible host-deploy role: Internal server error, please check Ansible
> runner error log.. Please check logs for more details:
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.
>
> No logs as usual. The error must be on the engine side somewhere...
>
> ----- Original Message -----
> From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> To: "Nir Soffer" <nsoffer(a)redhat.com>
> Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<
> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
> Sent: Thursday, March 19, 2020 4:20:23 PM
> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> Thanks for the response, Nir.
>
> >You host installed without SSH server enabled?
> I've been virtualizing both engine and host vm since I joined the team,
> so enabling ssh access is the first thing I do after OS is installed.
>
> >Not sure why you need cockpit.
> >But you need:
> >sudo dnf install
> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> I did install ovirt-release-master rpm on the host and somehow managed to
> not copy that (facepalm). But believe me it's there.
> Regarding cockpit, I was following what's written in
> https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts...
>
> >Why not:
> >sudo yum install
> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it
> would silently fail when you try installing from the URL :D
>
> >Did you to add centos 7.7 host? 8.1?
> Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host
> (that's the lengths I went to get this thing working!). Both fail.
>
> >Look at the full half of the glass, you have engine.
> Nice one. Though I'm afraid that part might be poisoned since host
> configuration that worked for me for a year now instantly fails no matter
> what OS is used...
>
> Fedor
>
> ----- Original Message -----
> From: "Nir Soffer" <nsoffer(a)redhat.com>
> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> Cc: "Martin Perina" <mperina(a)redhat.com>, "Liran Rotenberg"
<
> lrotenbe(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <
> devel(a)ovirt.org>
> Sent: Thursday, March 19, 2020 2:31:39 AM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> package?
>
> On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> >
> > Wow. I did not expect that, but after clean setup the error is still
> there.
> > I can't add fedora 30 host to fedora 30 engine.
> >
> > Here is a full bash history for the host machine since OS was installed:
> >
> > sudo yum update
>
> Good
>
> > sudo systemctl enable sshd
>
> You host installed without SSH server enabled?
>
> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> > sudo nmcli connection mod ens3 ipv4.method manual
>
> You can configure the network from the installer, less painful.
>
> > sudo vi /etc/hosts
> > sudo poweroff
> > sudo yum install cockpit-ovirt-dashboard
> > sudo systemctl enable cockpit.socket --now
>
> Not sure why you need cockpit.
>
> But you need:
>
> sudo dnf install
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> >
> > Same for the engine machine (I was installing dependencies separetely
> because 1. yum bugs & 2. I was checking if versions are correct one by one):
> >
> > sudo yum update
> > sudo systemctl enable sshd
> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24
> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> > sudo nmcli connection mod ens3 ipv4.method manual
> > sudo vi /etc/hosts
> > sudo poweroff
> > sudo yum install java-11-openjdk-devel
> > sudo yum install java-1.8.0-openjdk-headless
> > sudo yum install mailcap
> > sudo yum install unzip
> > sudo yum install openssl
> > sudo yum install bind-utils
> > sudo yum install postgresql-server
> > sudo yum install postgresql
> > sudo yum install postgresql-contrib
> > sudo yum install python2-dateutil
> > sudo yum install python3-dateutil
> > sudo yum install python2-m2crypto
> > sudo yum install python3-m2crypto
> > sudo yum install python2-psycopg2
> > sudo yum install python3-psycopg2
> > sudo yum install python2-jinja2
> > sudo yum install python3-jinja2
> > sudo yum install python2-libxml2
> > sudo yum install python3-libxml2
> > sudo yum install python2-daemon
> > sudo yum install python3-daemon
>
> > wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > sudo yum install ./ovirt-release-master.rpm -y
>
> Why not:
>
> sudo yum install
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>
> Also, you want to instal this first - before you install other
> packages, so you get packages
> from ovirt dependencies.
>
> > sudo yum install otopi
> > sudo yum install python3-ovirt-setup-lib
> > sudo yum install maven
> > sudo yum install ansible
> > sudo yum install ansible-runner-service-dev
> > sudo yum install ovirt-ansible-roles
> > sudo yum install ovirt-engine-metrics
> > sudo yum install python3-ovirt-engine-sdk4
> > sudo yum install pyflakes
> > sudo yum install python-pep8
> > sudo yum install python3-docker
> > sudo yum install python3-isort
> > sudo yum install gcc
> > sudo yum install python2-devel
> > sudo yum install systemd-python
> > sudo yum install python-webob
> > sudo yum install redhat-rpm-config
> > sudo yum install scl-utils
> > sudo yum install ovirt-imageio-common
>
> Not needed, the ovirt-imageio-proxy will bring it.
>
> > sudo yum install make
> > sudo yum install python-requests
> > sudo yum install python-subprocess32
> > sudo alternatives --config java
> > sudo yum install ovirt-engine-wildfly
> > sudo yum install ovirt-engine-wildfly-overlay
> > sudo vi /etc/security/limits.d/10-nofile.conf
> > sudo firewall-cmd --add-port=8080/tcp --permanent
> > sudo firewall-cmd --add-port=8443/tcp --permanent
> > sudo firewall-cmd --add-port=8787/tcp --permanent
> > sudo firewall-cmd --add-port=5432/tcp --permanent
> > sudo firewall-cmd --add-port=54323/tcp --permanent
> > sudo firewall-cmd --reload
> > sudo postgresql-setup --initdb --unit postgresql
> > sudo vi /var/lib/pgsql/data/pg_hba.conf
> > sudo vi /var/lib/pgsql/data/postgresql.conf
> > sudo systemctl enable postgresql --now
> > sudo systemctl status postgresql
> > sudo su - postgres -c "psql -d template1"
> > sudo su - postgres -c "psql -d engine"
>
> sudo -u postgres -i ?
>
> > sudo vi /etc/ansible-runner-service/config.yaml
> > sudo systemctl enable ansible-runner-service --now
> > sudo systemctl status ansible-runner-service
> > sudo yum install git
> > mkdir ~/git && cd ~/git
> > git clone git://gerrit.ovirt.org/ovirt-imageio
> > git clone git://gerrit.ovirt.org/ovirt-engine
> > vi ~/.bashrc
> > sudo reboot
> > cd ovirt-engine/
> > make clean install-dev PREFIX="/home/apple/ovirt-engine"
SKIP_CHECKS=1
> > cd ~/git/ovirt-imageio/
> > make
> > cd proxy/
> > make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
> > ~/ovirt-engine/bin/engine-setup
> > ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
> > vi ~/.bashrc
> > vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
> > sudo poweroff
> >
> > I don't know what's wrong. It does not work.
>
> Look at the full half of the glass, you have engine.
>
> Did you to add centos 7.7 host? 8.1?
>
> > ----- Original Message -----
> > From: "Martin Perina" <mperina(a)redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana
Elfassy" <
> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
> > Sent: Wednesday, March 18, 2020 3:15:15 PM
> > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev package?
> >
> > On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
> wrote:
> >
> > > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder
> why I
> > > haven't got this error sooner.
> > > Also, given the workaround, does that mean that ansible-lint is
> optional?
> > >
> >
> > Yes, same as pep8, pyflake and other build check tools
> >
> > >
> > > ----- Original Message -----
> > > From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
> > > Cc: "Dana Elfassy" <delfassy(a)redhat.com>, "devel"
<devel(a)ovirt.org>
> > > Sent: Wednesday, March 18, 2020 2:21:14 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > >
> > >
> > > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > >
> > >
> > > Ok, thanks for the reaction :)
> > >
> > > Getting back to the main topic, can anyone (please) try to compile the
> > > engine master now?
> > > That's what I get when I try to:
> > >
> > > [602] Don't compare to empty string
> > >
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
> > >
> > > when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
> > >
> > > [602] Don't compare to empty string
> > >
> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
> > >
> > > when: hosted_engine_vm_cluster_name_result.stdout | trim == ""
or
> > > hosted_engine_vm_cluster_name_result.stdout is undefined
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
> > >
> > > Task/Handler: Install collectd package
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
> > >
> > > Task/Handler: Install collectd plugins on engine
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
> > >
> > > Task/Handler: Install collectd plugins on hosts
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
> > >
> > > Task/Handler: Install collectd write_syslog plugin
> > >
> > > [303] systemctl used in place of systemd module
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
> > >
> > > Task/Handler: Check if fluentd is running
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
> > >
> > > - fluentd_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
> > >
> > > changed_when: fluentd_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
> > >
> > > - fluentd_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
> > >
> > > when: fluentd_is_running|default(false)|bool == false
> > >
> > > [303] systemctl used in place of systemd module
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
> > >
> > > Task/Handler: Check if rsyslog is running
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
> > >
> > > - rsyslog_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
> > >
> > > changed_when: rsyslog_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
> > >
> > > - rsyslog_is_running|default(false)|bool == true
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
> > >
> > > when: rsyslog_is_running|default(false)|bool == false
> > >
> > > [303] systemctl used in place of systemd module
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
> > >
> > > Task/Handler: Check if collectd is running
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
> > >
> > > Task/Handler: Install fluentd package
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
> > >
> > > Task/Handler: Install fluentd engine plugins
> > >
> > > [403] Package installs should not use latest
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
> > >
> > > Task/Handler: Install fluentd host plugins
> > >
> > > [601] Don't compare to literal True/False
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
> > >
> > > when: stat_result.stat.exists == True
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
> > >
> > > Task/Handler: Get ovirt_engine_fqdn
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
> > >
> > > Task/Handler: Get ovirt_engine_db_name
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
> > >
> > > Task/Handler: Get ovirt_engine_db_user
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
> > >
> > > Task/Handler: Get ovirt_engine_history_db_name
> > >
> > > [301] Commands should not change things if nothing needs doing
> > >
>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
> > >
> > > Task/Handler: Get ovirt_engine_history_db_user
> > >
> > > make[1]: *** [Makefile:401: validations] Error 2
> > > make[1]: Leaving directory '/home/apple/git/ovirt-engine'
> > > make: *** [Makefile:584: all-dev] Error 2
> > >
> > > An extensive lecture from ansible, but what is this even about?
> > > https://bugzilla.redhat.com/show_bug.cgi?id=1804268
> > >
> > >
> > >
> > > ...
> > >
> > >
> > > ----- Original Message -----
> > > From: "Nir Soffer" < nsoffer(a)redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >, "Dana
Elfassy" <
> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > > Sent: Wednesday, March 18, 2020 11:45:28 AM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > package?
> > >
> > > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo(a)redhat.com
> >
> > > wrote:
> > > >
> > > > For the time being I'm doing super careful clean installation of
> both
> > > engine and host in hopes of getting dev env working again... results
> are
> > > yet to be seen.
> > > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt
> master
> > > rpm for Fedora 30. Correct name for the package is
> > > python3-ovirt-engine-sdk4. And more examples like that with random
> package
> > > renamings.
> > > >
> > > > README definitely needs an update. If you ask me, I would rather
> provide
> > > users with a single version (Fedora 30 only) of dev installation docs
> that
> > > works rather than with two versions that don't.
> > >
> > > Please do the update.
> > >
> > > Hopefully you will have more luck, my last README patch was abandoned
> > > after
> > > it was neglected by engine maintainers.
> > > https://gerrit.ovirt.org/c/106467/
> > >
> > > > Are there any reasons to keep CentOS 7 info there that's
irrelevant
> now?
> > >
> > > It should be dropped now.
> > >
> > > > I can rework the docs for FC30 eventually if no one minds.
> > >
> > > There is already a working fedora 30 instructions in the bottom of the
> > > readme. It used to
> > > work when Amit added it.
> > >
> > > > Or, if plans are to move to CentOS 8, maybe another brave soul can
> do
> > > that.
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org >
> > > > Sent: Tuesday, March 17, 2020 1:13:48 PM
> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
> > > package?
> > > >
> > > >
> > > >
> > > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com >
> > > wrote:
> > > >
> > > >
> > > > I just tried installing on Fedora 30 host and error stays the same,
> so
> > > it's probably not as OS. Might try clean setup next, what else...
> > > >
> > > > Liran, do you see anything of interest when you journalctl -u
> > > ansible-runner-service | grep fatal ?
> > > > No, we do see a trackback on the command pointing out to
> > > python3.7/site-packages/runner_service/services/jobs.py
> > > > But, because breakpoint that only makes things slower, I think
it's
> > > timing/locking issue somehow.
> > > >
> > > >
> > > >
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > Cc: "Martin Perina" < mperina(a)redhat.com >, "Dana
Elfassy" <
> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
> > > > Sent: Tuesday, March 17, 2020 12:49:32 PM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > package?
> > > >
> > > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com >
> > > wrote:
> > > >
> > > > > I tried installing python 2 versions of some dependencies in
> addition
> > > to
> > > > > python 3 (as
> > > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > > > > is not clear about it at all. on Fedora 30 default versions of
> these
> > > > > libraries you get when not specifying python vesion in the name
> are
> > > python
> > > > > 2.)
> > > > > Now error looks slightly different :'D
> > > > >
> > > > > 2020-03-17 11:08:27,294+01 ERROR
> > > > >
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > > > > VDS_INSTALL_FAILED(505), Host banana installation failed.
Internal
> > > server
> > > > > error, please check Ansible runner error log..
> > > > >
> > > > > Everything else stays the same, host install fails almost
> immediately.
> > > > > Does someone have any notes for Fedora 30 install they can
share?
> > > > >
> > > > I start seeing it too:
> > > > ansible-runner-service-dev-1.0.1-1.fc30.noarch
> > > > python3-ansible-runner-1.3.4-2.fc30.noarch
> > > > engine:
> > > > http://pastebin.test.redhat.com/845373
> > > > of course no ansible log..
> > > > This is what journalctl show:
> > > > http://pastebin.test.redhat.com/845375
> > > >
> > > > After doing some debugging in the engine, after setting a
> breakpoint in
> > > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
> > > Step-Over
> > > > until the execution (lines 139-147) it does work. Without breaking
> point
> > > > and making things slower it throws the error.
>
Here^
> > >
> > > > >
> > > > > Thanks,
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > To: "Martin Perina" < mperina(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 3:52:47 PM
> > > > > Subject: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > Sorry, my bad, it was just under my nose. Systemctl is not aware
> of
> > > > > gunicorn-3, but when I check journalctl for
> ansible-runner-service I
> > > see
> > > > > the following:
> > > > >
> > > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner
Service.
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2992]
> > > > > [INFO] Starting gunicorn 19.9.0
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2992]
> > > > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2992]
> > > > > [INFO] Using worker: sync
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2995]
> > > > > [INFO] Booting worker with pid: 2995
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55
> +0100]
> > > [2997]
> > > > > [INFO] Booting worker with pid: 2997
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
> configuration
> > > > > options from /etc/ansible-runner-service/config.yaml
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
> playbooks_root_dir
> > > to
> > > > >
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to
> root
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
ssh_private_key
> to
> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime
> overrides
> > > from
> > > > > environment variables
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration
settings
> > > > > overridden
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
> configuration
> > > > > options from /etc/ansible-runner-service/config.yaml
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
> playbooks_root_dir
> > > to
> > > > >
> > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to
> root
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
ssh_private_key
> to
> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime
> overrides
> > > from
> > > > > environment variables
> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration
settings
> > > > > overridden
> > > > >
> > > > > Is that any suspicious? :)
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 3:36:40 PM
> > > > > Subject: [ovirt-devel] Re: what's up with
> ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > >
> > > > >
> > > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > > >
> > > > > wrote:
> > > > >
> > > > >
> > > > > Nothing since there is no such service (or similarly named).
> > > > > Package python3-gunicorn is installed though.
> > > > >
> > > > > After you start ansible-runner-service service, you should see
> similar
> > > > > logs in journalctl:
> > > > >
> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
> +0100]
> > > > > [1386] [INFO] Starting gunicorn 19.9.0
> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
> +0100]
> > > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
> +0100]
> > > > > [1386] [INFO] Using worker: sync
> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01
> +0100]
> > > > > [1496] [INFO] Booting worker with pid: 1496
> > > > > And more if you execute some action from engine (like install
new
> host
> > > or
> > > > > upgrade a host)
> > > > >
> > > > >
> > > > >
> > > > > So does that mean that something was supposed to register it as
a
> > > service
> > > > > but did not?
> > > > >
> > > > > Fedor
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina(a)redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> devel(a)ovirt.org
> > > >
> > > > > Sent: Monday, March 16, 2020 3:13:03 PM
> > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > > >
> > > > > wrote:
> > > > >
> > > > > > FC30 dev env engine indeed :) I've done this before on
other
> OS, so
> > > > > unless
> > > > > > there is a blindspot somewhere in my eye it should be
configured
> > > fine.
> > > > > >
> > > > > > [apple@apple ~]$ sudo systemctl status
ansible-runner-service
> > > > > > ● ansible-runner-service.service - Ansible Runner Service
> > > > > > Loaded: loaded
> > > (/usr/lib/systemd/system/ansible-runner-service.service;
> > > > > > enabled; vendor preset: disabled)
> > > > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET;
> 16min
> > > ago
> > > > > > Main PID: 909 (gunicorn-3)
> > > > > > Tasks: 9 (limit: 4915)
> > > > > > Memory: 193.4M
> > > > > > CGroup: /system.slice/ansible-runner-service.service
> > > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
> > > > > > -w 2 runner_service.wsgi:application
> > > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
> > > > > > -w 2 runner_service.wsgi:application
> > > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
> > > > > > -w 2 runner_service.wsgi:application
> > > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > > --private-key
> > > > > >
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > > --private-key
> > > > > >
> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > > >
> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s
-o
> > > > > > StrictHostKeyChecking=no -o Port=22 -o
> > > > > >
> > > > >
> > >
>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> > >
> > > > >
> > > > > > -o KbdInteractiveAu>
> > > > > >
> > > > > > And the config:
> > > > > >
> > > > > > ---
> > > > > > version: 1
> > > > > >
> > > > > > # playbooks_root_dir
> > > > > > # location of the playbooks that the service will start
> > > > > > playbooks_root_dir:
> > > > > >
> > > > >
> > >
> '/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> > >
> > > > >
> > > > > > # port
> > > > > > # tcp port for the service to listen to
> > > > > > port: 50001
> > > > > > #
> > > > > > # ip_address
> > > > > > # Specific IP address to bind to
> > > > > > # ip_address: '0.0.0.0'
> > > > > > target_user: root
> > > > > > #event_cache_size: 3
> > > > > > ssh_private_key:
> > > > > >
> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > > > > >
> > > > > > /home/apple/ovirt-engine is where engine is dev-installed.
Not
> sure
> > > what
> > > > > > else to check now...
> > > > > >
> > > > >
> > > > > Anything strange in journalctl for gunicorn-3 service?
> > > > >
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Martin Perina" < mperina(a)redhat.com
>
> > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
> > > devel(a)ovirt.org >
> > > > > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > > package?
> > > > > >
> > > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
> fgavrilo(a)redhat.com
> > > >
> > > > > > wrote:
> > > > > >
> > > > > > > Actually, it was too early for me to celebrate.
> > > > > > >
> > > > > > > On Fedora 30, the engine compiles and runs fine, but
when I
> try
> > > adding
> > > > > > the
> > > > > > > host installation fails almost immediately and I get
the
> following
> > > > > errors
> > > > > > > in the engine logs:
> > > > > > >
> > > > > > > ERROR
> > > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01]
Host
> > > installation
> > > > > > > failed for host
'6402d350-69de-4181-bfc1-50e0e79c8228',
> 'banana':
> > > > > Failed
> > > > > > to
> > > > > > > execute Ansible host-deploy role: Internal server
error,
> please
> > > check
> > > > > > > Ansible runner error log.. Please check logs for more
details:
> > > > > > >
> > > > > >
> > > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > >
> > > > >
> > > > > > >
> > > > > > > There is nothing else. There is no file
> > > > > > >
> > > > > >
> > > > >
> > >
>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> > >
> > > > >
> > > > > > > Snapshot I'm using for the host is the same that
worked just
> fine
> > > when
> > > > > > > engine was running on CentOS 7 and is CentOS 7 itself.
Is
> that an
> > > > > issue?
> > > > > > >
> > > > > >
> > > > > > As you mentioned building engine I assume you are using
engine
> in
> > > dev
> > > > > env
> > > > > > on FC30, right? If so, have you manually configured
> > > > > ansible-runner-service
> > > > > > for dev env as mentioned in
> > > > > >
> > > > > >
> > > > >
> > >
>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
> > > > > > ?
> > > > > >
> > > > > >
> > > > > > > Thanks,
> > > > > > > Fedor
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > > To: "Martin Perina" < mperina(a)redhat.com
>
> > > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com
>, "devel" <
> > > devel(a)ovirt.org
> > > > > >
> > > > > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > > > > Subject: [ovirt-devel] Re: what's up with
> > > ansible-runner-service-dev
> > > > > > > package?
> > > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > Resolved through installing engine on Fedora 30. From
what I
> > > > > understand,
> > > > > > > CentOS 7 is not supported anymore.
> > > > > > >
> > > > > > > Fedor
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Martin Perina" < mperina(a)redhat.com
>
> > > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
> > > > > > > Cc: "Benny Zlotnik" < bzlotnik(a)redhat.com
>, "Dana Elfassy" <
> > > > > > > delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >, "Eyal
> > > Shenitzky"
> > > > > <
> > > > > > > eshenitz(a)redhat.com >
> > > > > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > > > ansible-runner-service-dev
> > > > > > > package?
> > > > > > >
> > > > > > > Hi Fedor,
> > > > > > >
> > > > > > > ansible-runner-service-dev package is available from
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
> > > > > > > repos which is included in ovirt-master-release
package, which
> > > > > > > includes all repositories necessary for oVirt
development:
> > > > > > >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > > >
> > > > > > > Was your issue resolved or not?
> > > > > > >
> > > > > > > Regards,
> > > > > > > Martin
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
> > > eshenitz(a)redhat.com
> > > > > >
> > > > > > > wrote:
> > > > > > >
> > > > > > > > Adding also +Dana Elfassy < delfassy(a)redhat.com
>
> > > > > > > >
> > > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
> > > bzlotnik(a)redhat.com >
> > > > > > wrote:
> > > > > > > >
> > > > > > > >> ansible-runner was added in 4.4, you
shouldn't need in 4.3
> > > > > > > >>
> > > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov
<
> > > > > fgavrilo(a)redhat.com >
> > > > > > > >> wrote:
> > > > > > > >> >
> > > > > > > >> > Hi Sandro,
> > > > > > > >> >
> > > > > > > >> > Thanks for the suggestion, but it seems
to not help much.
> > > > > > > >> >
> > > > > > > >> > ansible-runner-service-dev still
can't be found, I
> checked
> > > repos
> > > > > > that
> > > > > > > >> are installed from
> > > > > > > >>
> > > > >
> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > > >> and haven't found similarly names packages
either...
> > > > > > > >> >
> > > > > > > >> > $ sudo yum install
ansible-runner-service-dev
> > > > > > > >> > Loaded plugins: fastestmirror
> > > > > > > >> > Repository centos-sclo-rh-release is
listed more than
> once in
> > > the
> > > > > > > >> configuration
> > > > > > > >> > Repository sac-gluster-ansible is listed
more than once
> in
> > > the
> > > > > > > >> configuration
> > > > > > > >> > Determining fastest mirrors
> > > > > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > > > > >>
> > > > > > > >> | 30 kB 00:00:00
> > > > > > > >> > ovirt-master-epel/x86_64/metalink
> > > > > > > >>
> > > > > > > >> | 30 kB 00:00:00
> > > > > > > >> > * base: ftp.sh.cvut.cz
> > > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > > > > >> > * extras: ftp.sh.cvut.cz
> > > > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > > > > >> > * ovirt-4.3-snapshot-static:
ftp.plusline.net
> > > > > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > > > > >> > * ovirt-master-snapshot:
ftp.plusline.net
> > > > > > > >> > * ovirt-master-snapshot-static:
ftp.plusline.net
> > > > > > > >> > * updates: ftp.sh.cvut.cz
> > > > > > > >> > base
> > > > > > > >>
> > > > > > > >> | 3.6 kB 00:00:00
> > > > > > > >> > centos-opstools-release
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > centos-ovirt-common-testing
> > > > > > > >>
> > > > > > > >> | 3.4 kB 00:00:00
> > > > > > > >> > centos-ovirt44-testing
> > > > > > > >>
> > > > > > > >> | 3.4 kB 00:00:00
> > > > > > > >> > centos-qemu-ev-release
> > > > > > > >>
> > > > > > > >> | 3.4 kB 00:00:00
> > > > > > > >> > centos-sclo-rh
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > centos-sclo-rh-release
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > centos-sclo-sclo
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > epel-apache-maven
> > > > > > > >>
> > > > > > > >> | 3.3 kB 00:00:00
> > > > > > > >> > extras
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-centos-gluster6
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-centos-opstools
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-centos-ovirt43
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-centos-qemu-ev
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-4.3-epel
> > > > > > > >>
> > > > > > > >> | 5.3 kB 00:00:00
> > > > > > > >> > ovirt-4.3-snapshot
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-4.3-snapshot-static
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-4.3-virtio-win-latest
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-master-centos-gluster6
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-master-centos-opstools-testing
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > ovirt-master-epel
> > > > > > > >>
> > > > > > > >> | 5.3 kB 00:00:00
> > > > > > > >> > ovirt-master-snapshot
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-master-snapshot-static
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirt-master-virtio-win-latest
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > > > > >>
> > > > > > > >> | 3.0 kB 00:00:00
> > > > > > > >> > sac-gluster-ansible
> > > > > > > >>
> > > > > > > >> | 3.3 kB 00:00:00
> > > > > > > >> > updates
> > > > > > > >>
> > > > > > > >> | 2.9 kB 00:00:00
> > > > > > > >> > (1/32): base/7/x86_64/group_gz
> > > > > > > >>
> > > > > > > >> | 165 kB 00:00:00
> > > > > > > >> > (2/32): base/7/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 6.0 MB 00:00:00
> > > > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 4.2 MB 00:00:00
> > > > > > > >> > (4/32):
centos-qemu-ev-release/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 9.3 kB 00:00:00
> > > > > > > >> > (5/32):
centos-sclo-sclo/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 344 kB 00:00:00
> > > > > > > >> > (6/32):
centos-ovirt44-testing/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 1.1 kB 00:00:01
> > > > > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 164 kB 00:00:00
> > > > > > > >> > (8/32):
centos-opstools-release/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 429 kB 00:00:01
> > > > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 101 kB 00:00:01
> > > > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 116 kB 00:00:00
> > > > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 73 kB 00:00:00
> > > > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > > > > >>
> > > > > > > >> | 90 kB 00:00:00
> > > > > > > >> > (13/32):
epel-apache-maven/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 5.0 kB 00:00:01
> > > > > > > >> > (14/32):
ovirt-4.3-epel/x86_64/updateinfo
> > > > > > > >>
> > > > > > > >> | 1.0 MB 00:00:00
> > > > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 429 kB 00:00:00
> > > > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 211 kB 00:00:00
> > > > > > > >> > (17/32):
ovirt-4.3-snapshot-static/7/primary_db
> > > > > > > >>
> > > > > > > >> | 3.4 kB 00:00:00
> > > > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > > > > >>
> > > > > > > >> | 109 kB 00:00:00
> > > > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 116 kB 00:00:00
> > > > > > > >> > (20/32):
ovirt-4.3-epel/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 6.7 MB 00:00:00
> > > > > > > >> > (21/32):
ovirt-master-epel/x86_64/group_gz
> > > > > > > >>
> > > > > > > >> | 90 kB 00:00:00
> > > > > > > >> > (22/32):
ovirt-master-epel/x86_64/updateinfo
> > > > > > > >>
> > > > > > > >> | 1.0 MB 00:00:00
> > > > > > > >> > (23/32):
ovirt-master-snapshot/7/primary_db
> > > > > > > >>
> > > > > > > >> | 54 kB 00:00:00
> > > > > > > >> > (24/32):
ovirt-4.3-virtio-win-latest/primary_db
> > > > > > > >>
> > > > > > > >> | 7.6 kB 00:00:01
> > > > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
> > > > > > > >>
> > > > > > > >> | 4.6 kB 00:00:00
> > > > > > > >> > (26/32):
ovirt-master-epel/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 6.7 MB 00:00:00
> > > > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
> > > > > > > >>
> > > > > > > >> | 7.6 kB 00:00:00
> > > > > > > >> > (28/32):
centos-sclo-rh-release/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 4.2 MB 00:00:03
> > > > > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 6.7 MB 00:00:00
> > > > > > > >> > (30/32):
> > > ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 611 kB 00:00:01
> > > > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 2.3 kB 00:00:00
> > > > > > > >> > (32/32):
sac-gluster-ansible/x86_64/primary_db
> > > > > > > >>
> > > > > > > >> | 13 kB 00:00:00
> > > > > > > >> > No package ansible-runner-service-dev
available.
> > > > > > > >> > Error: Nothing to do
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > Fedor
> > > > > > > >> >
> > > > > > > >> > ----- Original Message -----
> > > > > > > >> > From: "Sandro Bonazzola" <
sbonazzo(a)redhat.com >
> > > > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
> > > > > > devel(a)ovirt.org >
> > > > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > > > > >> > Subject: Re: [ovirt-devel] Re: what's
up with
> > > > > > > >> ansible-runner-service-dev package?
> > > > > > > >> >
> > > > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39
Fedor Gavrilov <
> > > > > > > >> fgavrilo(a)redhat.com >
> > > > > > > >> > ha scritto:
> > > > > > > >> >
> > > > > > > >> > > Thanks for the response, Eyal!
> > > > > > > >> > >
> > > > > > > >> > > I already had ovirt-master repo
installed, but updated
> > > > > everything
> > > > > > > >> just in
> > > > > > > >> > > case.
> > > > > > > >> > > I even tried both yum and dnf (since
yum on centos was
> > > giving
> > > > > me
> > > > > > > lots
> > > > > > > >> of
> > > > > > > >> > > grief before and I learned their
behaviour differs,
> > > especially
> > > > > > when
> > > > > > > it
> > > > > > > >> > > comes to bugs) but none works...
> > > > > > > >> > >
> > > > > > > >> > > >No package
ansible-runner-service-dev available.
> > > > > > > >> > > >No match for argument:
ansible-runner-service-dev
> > > > > > > >> > >
> > > > > > > >> > > Fedor
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> > Looks like you're trying to install
> ovirt-master-snapshot on
> > > el7.
> > > > > > > >> > It won't work.
> > > > > > > >> > Master is not supporting el7 anymore.
> > > > > > > >> > You can use 4.3 snapshot rpm at :
> > > > > > > >> >
> > > > > >
> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > > >> if
> > > > > > > >> > you need to stay on el7.
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > > ----- Original Message -----
> > > > > > > >> > > From: "Eyal Shenitzky"
< eshenitz(a)redhat.com >
> > > > > > > >> > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
> > > > > > > >> > > Cc: "devel" <
devel(a)ovirt.org >
> > > > > > > >> > > Sent: Tuesday, March 10, 2020
2:24:16 PM
> > > > > > > >> > > Subject: Re: [ovirt-devel]
what's up with
> > > > > > ansible-runner-service-dev
> > > > > > > >> > > package?
> > > > > > > >> > >
> > > > > > > >> > > Hi Fedor,
> > > > > > > >> > >
> > > > > > > >> > > Please try:
> > > > > > > >> > > 1. dnf install
> > > > > > > >> > >
> > > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > > > >> > > 2. dnf update
> > > > > > > >> > > 3. dnf install
ansible-runner-service-dev
> > > > > > > >> > > 4. flow the instruction from thread
'New dependency for
> > > > > > development
> > > > > > > >> > > environment'
> > > > > > > >> > > The
> > > > > > > >> > >
> > > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor
Gavrilov <
> > > > > fgavrilo(a)redhat.com
> > > > > > >
> > > > > > > >> wrote:
> > > > > > > >> > >
> > > > > > > >> > > > Hi everyone,
> > > > > > > >> > > >
> > > > > > > >> > > > After I screwed up my dev
environment beyond repair I
> > > have to
> > > > > > set
> > > > > > > >> it up
> > > > > > > >> > > > again and I see something I
haven't last time
> (CentOS 7):
> > > > > > > >> > > >
> > > > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
> > > > > > > >> > > > Loaded plugins: fastestmirror
> > > > > > > >> > > > Loading mirror speeds from
cached hostfile
> > > > > > > >> > > > * base: mirror.hosting90.cz
> > > > > > > >> > > > * centos-sclo-rh:
mirror.hosting90.cz
> > > > > > > >> > > > * centos-sclo-sclo:
mirror.hosting90.cz
> > > > > > > >> > > > * extras: mirror.hosting90.cz
> > > > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
> > > > > > > >> > > > * ovirt-master-snapshot:
ftp.nluug.nl
> > > > > > > >> > > > * ovirt-master-snapshot-static:
ftp.nluug.nl
> > > > > > > >> > > > * updates: mirror.hosting90.cz
> > > > > > > >> > > > No package
ansible-runner-service-dev available.
> > > > > > > >> > > >
> > > > > > > >> > > > Maybe something's missing
from my notes, but where
> did it
> > > go?
> > > > > > > >> Should I
> > > > > > > >> > > add
> > > > > > > >> > > > some repo?
> > > > > > > >> > > >
> > > > > > > >> > > > Fedor
> > > > > > > >> > > >
_______________________________________________
> > > > > > > >> > > > Devel mailing list --
devel(a)ovirt.org
> > > > > > > >> > > > To unsubscribe send an email
to
> devel-leave(a)ovirt.org
> > > > > > > >> > > > Privacy Statement:
> > > https://www.ovirt.org/privacy-policy.html
> > > > > > > >> > > > oVirt Code of Conduct:
> > > > > > > >> > > >
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > >> > > > List Archives:
> > > > > > > >> > > >
> > > > > > > >> > >
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
> > > > > > > >> > > >
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> > > --
> > > > > > > >> > > Regards,
> > > > > > > >> > > Eyal Shenitzky
> > > > > > > >> > >
_______________________________________________
> > > > > > > >> > > Devel mailing list --
devel(a)ovirt.org
> > > > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > > >> > > Privacy Statement:
> > > https://www.ovirt.org/privacy-policy.html
> > > > > > > >> > > oVirt Code of Conduct:
> > > > > > > >> > >
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > >> > > List Archives:
> > > > > > > >> > >
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
> > > > > > > >> > >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > --
> > > > > > > >> >
> > > > > > > >> > Sandro Bonazzola
> > > > > > > >> >
> > > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA
R&D RHV
> > > > > > > >> >
> > > > > > > >> > Red Hat EMEA < https://www.redhat.com/
>
> > > > > > > >> >
> > > > > > > >> > sbonazzo(a)redhat.com
> > > > > > > >> > < https://www.redhat.com/ >*Red Hat
respects your work
> life
> > > > > balance.
> > > > > > > >> > Therefore there is no need to answer this
email out of
> your
> > > > > office
> > > > > > > >> hours.
> > > > > > > >> > <
https://mojo.redhat.com/docs/DOC-1199578 >*
> > > > > > > >> >
_______________________________________________
> > > > > > > >> > Devel mailing list -- devel(a)ovirt.org
> > > > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > > >> > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > > > >> > oVirt Code of Conduct:
> > > > > > > >>
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > >> > List Archives:
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
> > > > > > > >>
_______________________________________________
> > > > > > > >> Devel mailing list -- devel(a)ovirt.org
> > > > > > > >> To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > > >> Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > > > >> oVirt Code of Conduct:
> > > > > > > >>
> https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > >> List Archives:
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
> > > > > > > >>
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Regards,
> > > > > > > > Eyal Shenitzky
> > > > > > > > _______________________________________________
> > > > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
> > > > > > > > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> > > > > > > > oVirt Code of Conduct:
> > > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > > List Archives:
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Martin Perina
> > > > > > > Manager, Software Engineering
> > > > > > > Red Hat Czech s.r.o.
> > > > > > > _______________________________________________
> > > > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > > > > > > oVirt Code of Conduct:
> > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > List Archives:
> > > > > > >
> > > > > >
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
> > > > > > >
> > > > > > >
> > > > > >
> > > > > > --
> > > > > > Martin Perina
> > > > > > Manager, Software Engineering
> > > > > > Red Hat Czech s.r.o.
> > > > > >
> > > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > >
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
> > > > > _______________________________________________
> > > > > Devel mailing list -- devel(a)ovirt.org
> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > oVirt Code of Conduct:
> > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > List Archives:
> > > > >
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
> > > > _______________________________________________
> > > > Devel mailing list -- devel(a)ovirt.org
> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
> > >
> > >
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
> > > _______________________________________________
> > > Devel mailing list -- devel(a)ovirt.org
> > > To unsubscribe send an email to devel-leave(a)ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > >
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
> > >
> >
> >
> > --
> > Martin Perina
> > Manager, Software Engineering
> > Red Hat Czech s.r.o.
> > _______________________________________________
> > Devel mailing list -- devel(a)ovirt.org
> > To unsubscribe send an email to devel-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5...
> _______________________________________________
> Devel mailing list -- devel(a)ovirt.org
> To unsubscribe send an email to devel-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJ...
>
--
Regards,
Eyal Shenitzky
6:40 p.m.
usually means you don't have the ovirtmgmt bridge on the host, going
to host -> network interfaces -> setup host networks should set it up
for you
On Tue, Mar 31, 2020 at 6:12 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Ok, after doing setup again I was able to get past ansible runner problem as it seems.
Not sure what the difference is other than the fact that I install ovirt-master repo first
and thus some dependencies are likely to come from there instead of standard fedora 30
repo.
There seems to be one last thing, though:
2020-03-31 16:00:01,430+02 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c] Host
'banana' is set to Non-Operational, it is missing the following networks:
'ovirtmgmt'
2020-03-31 16:00:01,474+02 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c]
EVENT_ID: VDS_SET_NONOPERATIONAL_NETWORK(519), Host banana does not comply with the
cluster Default networks, the following networks are missing on host: 'ovirtmgmt'
I'm sure I've seen such error some time ago, but can't remember what it might
mean...
Thanks,
Fedor
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Eyal Shenitzky" <eshenitz(a)redhat.com>
Cc: "Fedor Gavrilov" <fgavrilo(a)redhat.com>, "Nir Soffer"
<nsoffer(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <devel(a)ovirt.org>
Sent: Monday, March 23, 2020 10:35:49 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 23, 2020 at 11:29 AM Eyal Shenitzky <eshenitz(a)redhat.com> wrote:
> I encounter that problem when I didn't configure my ansible runner as
> needed
>
>
> Please check that your conf file (/etc/ansible-runner-service/config.yaml)
> is as follow:
>
> ---
>
>
>
>
>
> *version: 1 playbooks_root_dir:
>
'/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> ssh_private_key:
>
'/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> port: 50001 target_user: root*
>
If it still doesn't work try doing what I suggested with the breakpoint as
a workaround.
>
>
>
> On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
>
>> I just tried installing fedora 30 host with no pre-installed cockpit,
>> just ovirt-release-master repo. Same as always:
>>
>> 2020-03-20 14:01:30,134+01 ERROR
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID:
>> VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute
>> Ansible host-deploy role: Internal server error, please check Ansible
>> runner error log.. Please check logs for more details:
>>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.
>>
>> No logs as usual. The error must be on the engine side somewhere...
>>
>> ----- Original Message -----
>> From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> To: "Nir Soffer" <nsoffer(a)redhat.com>
>> Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana
Elfassy" <
>> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
>> Sent: Thursday, March 19, 2020 4:20:23 PM
>> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
>> package?
>>
>> Thanks for the response, Nir.
>>
>> >You host installed without SSH server enabled?
>> I've been virtualizing both engine and host vm since I joined the team,
>> so enabling ssh access is the first thing I do after OS is installed.
>>
>> >Not sure why you need cockpit.
>> >But you need:
>> >sudo dnf install
>> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>>
>> I did install ovirt-release-master rpm on the host and somehow managed to
>> not copy that (facepalm). But believe me it's there.
>> Regarding cockpit, I was following what's written in
>> https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts...
>>
>> >Why not:
>> >sudo yum install
>> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>>
>> Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it
>> would silently fail when you try installing from the URL :D
>>
>> >Did you to add centos 7.7 host? 8.1?
>> Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host
>> (that's the lengths I went to get this thing working!). Both fail.
>>
>> >Look at the full half of the glass, you have engine.
>> Nice one. Though I'm afraid that part might be poisoned since host
>> configuration that worked for me for a year now instantly fails no matter
>> what OS is used...
>>
>> Fedor
>>
>> ----- Original Message -----
>> From: "Nir Soffer" <nsoffer(a)redhat.com>
>> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> Cc: "Martin Perina" <mperina(a)redhat.com>, "Liran
Rotenberg" <
>> lrotenbe(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <
>> devel(a)ovirt.org>
>> Sent: Thursday, March 19, 2020 2:31:39 AM
>> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
>> package?
>>
>> On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
>> wrote:
>> >
>> > Wow. I did not expect that, but after clean setup the error is still
>> there.
>> > I can't add fedora 30 host to fedora 30 engine.
>> >
>> > Here is a full bash history for the host machine since OS was installed:
>> >
>> > sudo yum update
>>
>> Good
>>
>> > sudo systemctl enable sshd
>>
>> You host installed without SSH server enabled?
>>
>> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
>> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
>> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
>> > sudo nmcli connection mod ens3 ipv4.method manual
>>
>> You can configure the network from the installer, less painful.
>>
>> > sudo vi /etc/hosts
>> > sudo poweroff
>> > sudo yum install cockpit-ovirt-dashboard
>> > sudo systemctl enable cockpit.socket --now
>>
>> Not sure why you need cockpit.
>>
>> But you need:
>>
>> sudo dnf install
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>>
>> >
>> > Same for the engine machine (I was installing dependencies separetely
>> because 1. yum bugs & 2. I was checking if versions are correct one by
one):
>> >
>> > sudo yum update
>> > sudo systemctl enable sshd
>> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24
>> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
>> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
>> > sudo nmcli connection mod ens3 ipv4.method manual
>> > sudo vi /etc/hosts
>> > sudo poweroff
>> > sudo yum install java-11-openjdk-devel
>> > sudo yum install java-1.8.0-openjdk-headless
>> > sudo yum install mailcap
>> > sudo yum install unzip
>> > sudo yum install openssl
>> > sudo yum install bind-utils
>> > sudo yum install postgresql-server
>> > sudo yum install postgresql
>> > sudo yum install postgresql-contrib
>> > sudo yum install python2-dateutil
>> > sudo yum install python3-dateutil
>> > sudo yum install python2-m2crypto
>> > sudo yum install python3-m2crypto
>> > sudo yum install python2-psycopg2
>> > sudo yum install python3-psycopg2
>> > sudo yum install python2-jinja2
>> > sudo yum install python3-jinja2
>> > sudo yum install python2-libxml2
>> > sudo yum install python3-libxml2
>> > sudo yum install python2-daemon
>> > sudo yum install python3-daemon
>>
>> > wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>> > sudo yum install ./ovirt-release-master.rpm -y
>>
>> Why not:
>>
>> sudo yum install
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>>
>> Also, you want to instal this first - before you install other
>> packages, so you get packages
>> from ovirt dependencies.
>>
>> > sudo yum install otopi
>> > sudo yum install python3-ovirt-setup-lib
>> > sudo yum install maven
>> > sudo yum install ansible
>> > sudo yum install ansible-runner-service-dev
>> > sudo yum install ovirt-ansible-roles
>> > sudo yum install ovirt-engine-metrics
>> > sudo yum install python3-ovirt-engine-sdk4
>> > sudo yum install pyflakes
>> > sudo yum install python-pep8
>> > sudo yum install python3-docker
>> > sudo yum install python3-isort
>> > sudo yum install gcc
>> > sudo yum install python2-devel
>> > sudo yum install systemd-python
>> > sudo yum install python-webob
>> > sudo yum install redhat-rpm-config
>> > sudo yum install scl-utils
>> > sudo yum install ovirt-imageio-common
>>
>> Not needed, the ovirt-imageio-proxy will bring it.
>>
>> > sudo yum install make
>> > sudo yum install python-requests
>> > sudo yum install python-subprocess32
>> > sudo alternatives --config java
>> > sudo yum install ovirt-engine-wildfly
>> > sudo yum install ovirt-engine-wildfly-overlay
>> > sudo vi /etc/security/limits.d/10-nofile.conf
>> > sudo firewall-cmd --add-port=8080/tcp --permanent
>> > sudo firewall-cmd --add-port=8443/tcp --permanent
>> > sudo firewall-cmd --add-port=8787/tcp --permanent
>> > sudo firewall-cmd --add-port=5432/tcp --permanent
>> > sudo firewall-cmd --add-port=54323/tcp --permanent
>> > sudo firewall-cmd --reload
>> > sudo postgresql-setup --initdb --unit postgresql
>> > sudo vi /var/lib/pgsql/data/pg_hba.conf
>> > sudo vi /var/lib/pgsql/data/postgresql.conf
>> > sudo systemctl enable postgresql --now
>> > sudo systemctl status postgresql
>> > sudo su - postgres -c "psql -d template1"
>> > sudo su - postgres -c "psql -d engine"
>>
>> sudo -u postgres -i ?
>>
>> > sudo vi /etc/ansible-runner-service/config.yaml
>> > sudo systemctl enable ansible-runner-service --now
>> > sudo systemctl status ansible-runner-service
>> > sudo yum install git
>> > mkdir ~/git && cd ~/git
>> > git clone git://gerrit.ovirt.org/ovirt-imageio
>> > git clone git://gerrit.ovirt.org/ovirt-engine
>> > vi ~/.bashrc
>> > sudo reboot
>> > cd ovirt-engine/
>> > make clean install-dev PREFIX="/home/apple/ovirt-engine"
SKIP_CHECKS=1
>> > cd ~/git/ovirt-imageio/
>> > make
>> > cd proxy/
>> > make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
>> > ~/ovirt-engine/bin/engine-setup
>> > ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
>> > vi ~/.bashrc
>> > vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
>> > sudo poweroff
>> >
>> > I don't know what's wrong. It does not work.
>>
>> Look at the full half of the glass, you have engine.
>>
>> Did you to add centos 7.7 host? 8.1?
>>
>> > ----- Original Message -----
>> > From: "Martin Perina" <mperina(a)redhat.com>
>> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> > Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana
Elfassy" <
>> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
>> > Sent: Wednesday, March 18, 2020 3:15:15 PM
>> > Subject: Re: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev package?
>> >
>> > On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
>> wrote:
>> >
>> > > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder
>> why I
>> > > haven't got this error sooner.
>> > > Also, given the workaround, does that mean that ansible-lint is
>> optional?
>> > >
>> >
>> > Yes, same as pep8, pyflake and other build check tools
>> >
>> > >
>> > > ----- Original Message -----
>> > > From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
>> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> > > Cc: "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <devel(a)ovirt.org>
>> > > Sent: Wednesday, March 18, 2020 2:21:14 PM
>> > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
>> > > package?
>> > >
>> > >
>> > >
>> > > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
>> >
>> > > wrote:
>> > >
>> > >
>> > > Ok, thanks for the reaction :)
>> > >
>> > > Getting back to the main topic, can anyone (please) try to compile
the
>> > > engine master now?
>> > > That's what I get when I try to:
>> > >
>> > > [602] Don't compare to empty string
>> > >
>> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
>> > >
>> > > when: hosted_engine_vm_cluster_name_result.stdout | trim !=
""
>> > >
>> > > [602] Don't compare to empty string
>> > >
>> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
>> > >
>> > > when: hosted_engine_vm_cluster_name_result.stdout | trim ==
"" or
>> > > hosted_engine_vm_cluster_name_result.stdout is undefined
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
>> > >
>> > > Task/Handler: Install collectd package
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
>> > >
>> > > Task/Handler: Install collectd plugins on engine
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
>> > >
>> > > Task/Handler: Install collectd plugins on hosts
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
>> > >
>> > > Task/Handler: Install collectd write_syslog plugin
>> > >
>> > > [303] systemctl used in place of systemd module
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
>> > >
>> > > Task/Handler: Check if fluentd is running
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
>> > >
>> > > - fluentd_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
>> > >
>> > > changed_when: fluentd_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
>> > >
>> > > - fluentd_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
>> > >
>> > > when: fluentd_is_running|default(false)|bool == false
>> > >
>> > > [303] systemctl used in place of systemd module
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
>> > >
>> > > Task/Handler: Check if rsyslog is running
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
>> > >
>> > > - rsyslog_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
>> > >
>> > > changed_when: rsyslog_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
>> > >
>> > > - rsyslog_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
>> > >
>> > > when: rsyslog_is_running|default(false)|bool == false
>> > >
>> > > [303] systemctl used in place of systemd module
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
>> > >
>> > > Task/Handler: Check if collectd is running
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
>> > >
>> > > Task/Handler: Install fluentd package
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
>> > >
>> > > Task/Handler: Install fluentd engine plugins
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
>> > >
>> > > Task/Handler: Install fluentd host plugins
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
>> > >
>> > > when: stat_result.stat.exists == True
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
>> > >
>> > > Task/Handler: Get ovirt_engine_fqdn
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
>> > >
>> > > Task/Handler: Get ovirt_engine_db_name
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
>> > >
>> > > Task/Handler: Get ovirt_engine_db_user
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
>> > >
>> > > Task/Handler: Get ovirt_engine_history_db_name
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
>> > >
>> > > Task/Handler: Get ovirt_engine_history_db_user
>> > >
>> > > make[1]: *** [Makefile:401: validations] Error 2
>> > > make[1]: Leaving directory '/home/apple/git/ovirt-engine'
>> > > make: *** [Makefile:584: all-dev] Error 2
>> > >
>> > > An extensive lecture from ansible, but what is this even about?
>> > > https://bugzilla.redhat.com/show_bug.cgi?id=1804268
>> > >
>> > >
>> > >
>> > > ...
>> > >
>> > >
>> > > ----- Original Message -----
>> > > From: "Nir Soffer" < nsoffer(a)redhat.com >
>> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
>> > > Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >,
"Dana Elfassy" <
>> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
>> > > Sent: Wednesday, March 18, 2020 11:45:28 AM
>> > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
>> > > package?
>> > >
>> > > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
>> >
>> > > wrote:
>> > > >
>> > > > For the time being I'm doing super careful clean installation
of
>> both
>> > > engine and host in hopes of getting dev env working again... results
>> are
>> > > yet to be seen.
>> > > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt
>> master
>> > > rpm for Fedora 30. Correct name for the package is
>> > > python3-ovirt-engine-sdk4. And more examples like that with random
>> package
>> > > renamings.
>> > > >
>> > > > README definitely needs an update. If you ask me, I would rather
>> provide
>> > > users with a single version (Fedora 30 only) of dev installation docs
>> that
>> > > works rather than with two versions that don't.
>> > >
>> > > Please do the update.
>> > >
>> > > Hopefully you will have more luck, my last README patch was abandoned
>> > > after
>> > > it was neglected by engine maintainers.
>> > > https://gerrit.ovirt.org/c/106467/
>> > >
>> > > > Are there any reasons to keep CentOS 7 info there that's
irrelevant
>> now?
>> > >
>> > > It should be dropped now.
>> > >
>> > > > I can rework the docs for FC30 eventually if no one minds.
>> > >
>> > > There is already a working fedora 30 instructions in the bottom of
the
>> > > readme. It used to
>> > > work when Amit added it.
>> > >
>> > > > Or, if plans are to move to CentOS 8, maybe another brave soul
can
>> do
>> > > that.
>> > > > Fedor
>> > > >
>> > > > ----- Original Message -----
>> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
>> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
>> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
>> devel(a)ovirt.org >
>> > > > Sent: Tuesday, March 17, 2020 1:13:48 PM
>> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
>> > > package?
>> > > >
>> > > >
>> > > >
>> > > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com >
>> > > wrote:
>> > > >
>> > > >
>> > > > I just tried installing on Fedora 30 host and error stays the
same,
>> so
>> > > it's probably not as OS. Might try clean setup next, what else...
>> > > >
>> > > > Liran, do you see anything of interest when you journalctl -u
>> > > ansible-runner-service | grep fatal ?
>> > > > No, we do see a trackback on the command pointing out to
>> > > python3.7/site-packages/runner_service/services/jobs.py
>> > > > But, because breakpoint that only makes things slower, I think
it's
>> > > timing/locking issue somehow.
>> > > >
>> > > >
>> > > >
>> > > > Fedor
>> > > >
>> > > > ----- Original Message -----
>> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
>> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
>> > > > Cc: "Martin Perina" < mperina(a)redhat.com >,
"Dana Elfassy" <
>> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
>> > > > Sent: Tuesday, March 17, 2020 12:49:32 PM
>> > > > Subject: Re: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev
>> > > package?
>> > > >
>> > > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com >
>> > > wrote:
>> > > >
>> > > > > I tried installing python 2 versions of some dependencies
in
>> addition
>> > > to
>> > > > > python 3 (as
>> > > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
>> > > > > is not clear about it at all. on Fedora 30 default versions
of
>> these
>> > > > > libraries you get when not specifying python vesion in the
name
>> are
>> > > python
>> > > > > 2.)
>> > > > > Now error looks slightly different :'D
>> > > > >
>> > > > > 2020-03-17 11:08:27,294+01 ERROR
>> > > > >
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e]
EVENT_ID:
>> > > > > VDS_INSTALL_FAILED(505), Host banana installation failed.
Internal
>> > > server
>> > > > > error, please check Ansible runner error log..
>> > > > >
>> > > > > Everything else stays the same, host install fails almost
>> immediately.
>> > > > > Does someone have any notes for Fedora 30 install they can
share?
>> > > > >
>> > > > I start seeing it too:
>> > > > ansible-runner-service-dev-1.0.1-1.fc30.noarch
>> > > > python3-ansible-runner-1.3.4-2.fc30.noarch
>> > > > engine:
>> > > > http://pastebin.test.redhat.com/845373
>> > > > of course no ansible log..
>> > > > This is what journalctl show:
>> > > > http://pastebin.test.redhat.com/845375
>> > > >
>> > > > After doing some debugging in the engine, after setting a
>> breakpoint in
>> > > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
>> > > Step-Over
>> > > > until the execution (lines 139-147) it does work. Without
breaking
>> point
>> > > > and making things slower it throws the error.
>>
> Here^
> > > >
>> > > > >
>> > > > > Thanks,
>> > > > > Fedor
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
>> > > > > To: "Martin Perina" < mperina(a)redhat.com >
>> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
>> devel(a)ovirt.org
>> > > >
>> > > > > Sent: Monday, March 16, 2020 3:52:47 PM
>> > > > > Subject: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev
>> > > > > package?
>> > > > >
>> > > > > Sorry, my bad, it was just under my nose. Systemctl is not
aware
>> of
>> > > > > gunicorn-3, but when I check journalctl for
>> ansible-runner-service I
>> > > see
>> > > > > the following:
>> > > > >
>> > > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner
Service.
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2992]
>> > > > > [INFO] Starting gunicorn 19.9.0
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2992]
>> > > > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2992]
>> > > > > [INFO] Using worker: sync
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2995]
>> > > > > [INFO] Booting worker with pid: 2995
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2997]
>> > > > > [INFO] Booting worker with pid: 2997
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
>> configuration
>> > > > > options from /etc/ansible-runner-service/config.yaml
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
>> playbooks_root_dir
>> > > to
>> > > > >
>> > >
>> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to
50001
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
target_user to
>> root
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
ssh_private_key
>> to
>> > > > >
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime
>> overrides
>> > > from
>> > > > > environment variables
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration
settings
>> > > > > overridden
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
>> configuration
>> > > > > options from /etc/ansible-runner-service/config.yaml
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
>> playbooks_root_dir
>> > > to
>> > > > >
>> > >
>> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to
50001
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
target_user to
>> root
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
ssh_private_key
>> to
>> > > > >
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime
>> overrides
>> > > from
>> > > > > environment variables
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration
settings
>> > > > > overridden
>> > > > >
>> > > > > Is that any suspicious? :)
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > From: "Martin Perina" < mperina(a)redhat.com
>
>> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
>> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
>> devel(a)ovirt.org
>> > > >
>> > > > > Sent: Monday, March 16, 2020 3:36:40 PM
>> > > > > Subject: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev
>> > > > > package?
>> > > > >
>> > > > >
>> > > > >
>> > > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com
>> > > >
>> > > > > wrote:
>> > > > >
>> > > > >
>> > > > > Nothing since there is no such service (or similarly
named).
>> > > > > Package python3-gunicorn is installed though.
>> > > > >
>> > > > > After you start ansible-runner-service service, you should
see
>> similar
>> > > > > logs in journalctl:
>> > > > >
>> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15
15:28:01
>> +0100]
>> > > > > [1386] [INFO] Starting gunicorn 19.9.0
>> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15
15:28:01
>> +0100]
>> > > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
>> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15
15:28:01
>> +0100]
>> > > > > [1386] [INFO] Using worker: sync
>> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15
15:28:01
>> +0100]
>> > > > > [1496] [INFO] Booting worker with pid: 1496
>> > > > > And more if you execute some action from engine (like
install new
>> host
>> > > or
>> > > > > upgrade a host)
>> > > > >
>> > > > >
>> > > > >
>> > > > > So does that mean that something was supposed to register it
as a
>> > > service
>> > > > > but did not?
>> > > > >
>> > > > > Fedor
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > From: "Martin Perina" < mperina(a)redhat.com
>
>> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
>> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
>> devel(a)ovirt.org
>> > > >
>> > > > > Sent: Monday, March 16, 2020 3:13:03 PM
>> > > > > Subject: Re: [ovirt-devel] Re: what's up with
>> > > ansible-runner-service-dev
>> > > > > package?
>> > > > >
>> > > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com
>> > > >
>> > > > > wrote:
>> > > > >
>> > > > > > FC30 dev env engine indeed :) I've done this before
on other
>> OS, so
>> > > > > unless
>> > > > > > there is a blindspot somewhere in my eye it should be
configured
>> > > fine.
>> > > > > >
>> > > > > > [apple@apple ~]$ sudo systemctl status
ansible-runner-service
>> > > > > > ● ansible-runner-service.service - Ansible Runner
Service
>> > > > > > Loaded: loaded
>> > > (/usr/lib/systemd/system/ansible-runner-service.service;
>> > > > > > enabled; vendor preset: disabled)
>> > > > > > Active: active (running) since Mon 2020-03-16 14:27:15
CET;
>> 16min
>> > > ago
>> > > > > > Main PID: 909 (gunicorn-3)
>> > > > > > Tasks: 9 (limit: 4915)
>> > > > > > Memory: 193.4M
>> > > > > > CGroup: /system.slice/ansible-runner-service.service
>> > > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
>> > > > > > -w 2 runner_service.wsgi:application
>> > > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
>> > > > > > -w 2 runner_service.wsgi:application
>> > > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
>> > > > > > -w 2 runner_service.wsgi:application
>> > > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
>> > > > > > --private-key
>> > > > > >
>> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
>> > > > > >
>> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
>> > > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
>> > > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
>> > > > > > --private-key
>> > > > > >
>> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
>> > > > > >
>> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
>> > > > > > └─2607 ssh -C -o ControlMaster=auto -o
ControlPersist=60s -o
>> > > > > > StrictHostKeyChecking=no -o Port=22 -o
>> > > > > >
>> > > > >
>> > >
>>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>> > >
>> > > > >
>> > > > > > -o KbdInteractiveAu>
>> > > > > >
>> > > > > > And the config:
>> > > > > >
>> > > > > > ---
>> > > > > > version: 1
>> > > > > >
>> > > > > > # playbooks_root_dir
>> > > > > > # location of the playbooks that the service will
start
>> > > > > > playbooks_root_dir:
>> > > > > >
>> > > > >
>> > >
>>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>> > >
>> > > > >
>> > > > > > # port
>> > > > > > # tcp port for the service to listen to
>> > > > > > port: 50001
>> > > > > > #
>> > > > > > # ip_address
>> > > > > > # Specific IP address to bind to
>> > > > > > # ip_address: '0.0.0.0'
>> > > > > > target_user: root
>> > > > > > #event_cache_size: 3
>> > > > > > ssh_private_key:
>> > > > > >
>> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
>> > > > > >
>> > > > > > /home/apple/ovirt-engine is where engine is
dev-installed. Not
>> sure
>> > > what
>> > > > > > else to check now...
>> > > > > >
>> > > > >
>> > > > > Anything strange in journalctl for gunicorn-3 service?
>> > > > >
>> > > > > >
>> > > > > >
>> > > > > > ----- Original Message -----
>> > > > > > From: "Martin Perina" < mperina(a)redhat.com
>
>> > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
>> > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com
>, "devel" <
>> > > devel(a)ovirt.org >
>> > > > > > Sent: Monday, March 16, 2020 2:56:59 PM
>> > > > > > Subject: Re: [ovirt-devel] Re: what's up with
>> > > ansible-runner-service-dev
>> > > > > > package?
>> > > > > >
>> > > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com
>> > > >
>> > > > > > wrote:
>> > > > > >
>> > > > > > > Actually, it was too early for me to celebrate.
>> > > > > > >
>> > > > > > > On Fedora 30, the engine compiles and runs fine,
but when I
>> try
>> > > adding
>> > > > > > the
>> > > > > > > host installation fails almost immediately and I
get the
>> following
>> > > > > errors
>> > > > > > > in the engine logs:
>> > > > > > >
>> > > > > > > ERROR
>> > > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
>> > > > > > > (EE-ManagedThreadFactory-engine-Thread-1)
[bdc3c01] Host
>> > > installation
>> > > > > > > failed for host
'6402d350-69de-4181-bfc1-50e0e79c8228',
>> 'banana':
>> > > > > Failed
>> > > > > > to
>> > > > > > > execute Ansible host-deploy role: Internal server
error,
>> please
>> > > check
>> > > > > > > Ansible runner error log.. Please check logs for
more details:
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>> > >
>> > > > >
>> > > > > > >
>> > > > > > > There is nothing else. There is no file
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>> > >
>> > > > >
>> > > > > > > Snapshot I'm using for the host is the same
that worked just
>> fine
>> > > when
>> > > > > > > engine was running on CentOS 7 and is CentOS 7
itself. Is
>> that an
>> > > > > issue?
>> > > > > > >
>> > > > > >
>> > > > > > As you mentioned building engine I assume you are using
engine
>> in
>> > > dev
>> > > > > env
>> > > > > > on FC30, right? If so, have you manually configured
>> > > > > ansible-runner-service
>> > > > > > for dev env as mentioned in
>> > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
>> > > > > > ?
>> > > > > >
>> > > > > >
>> > > > > > > Thanks,
>> > > > > > > Fedor
>> > > > > > >
>> > > > > > > ----- Original Message -----
>> > > > > > > From: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
>> > > > > > > To: "Martin Perina" <
mperina(a)redhat.com >
>> > > > > > > Cc: "Dana Elfassy" <
delfassy(a)redhat.com >, "devel" <
>> > > devel(a)ovirt.org
>> > > > > >
>> > > > > > > Sent: Monday, March 16, 2020 12:37:44 PM
>> > > > > > > Subject: [ovirt-devel] Re: what's up with
>> > > ansible-runner-service-dev
>> > > > > > > package?
>> > > > > > >
>> > > > > > > Hi,
>> > > > > > >
>> > > > > > > Resolved through installing engine on Fedora 30.
From what I
>> > > > > understand,
>> > > > > > > CentOS 7 is not supported anymore.
>> > > > > > >
>> > > > > > > Fedor
>> > > > > > >
>> > > > > > > ----- Original Message -----
>> > > > > > > From: "Martin Perina" <
mperina(a)redhat.com >
>> > > > > > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
>> > > > > > > Cc: "Benny Zlotnik" <
bzlotnik(a)redhat.com >, "Dana Elfassy" <
>> > > > > > > delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >, "Eyal
>> > > Shenitzky"
>> > > > > <
>> > > > > > > eshenitz(a)redhat.com >
>> > > > > > > Sent: Monday, March 16, 2020 8:11:35 AM
>> > > > > > > Subject: Re: [ovirt-devel] Re: what's up with
>> > > > > ansible-runner-service-dev
>> > > > > > > package?
>> > > > > > >
>> > > > > > > Hi Fedor,
>> > > > > > >
>> > > > > > > ansible-runner-service-dev package is available
from
>> > > > > > >
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
>> > > > > > > repos which is included in ovirt-master-release
package, which
>> > > > > > > includes all repositories necessary for oVirt
development:
>> > > > > > >
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>> > > > > > >
>> > > > > > > Was your issue resolved or not?
>> > > > > > >
>> > > > > > > Regards,
>> > > > > > > Martin
>> > > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky
<
>> > > eshenitz(a)redhat.com
>> > > > > >
>> > > > > > > wrote:
>> > > > > > >
>> > > > > > > > Adding also +Dana Elfassy <
delfassy(a)redhat.com >
>> > > > > > > >
>> > > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik
<
>> > > bzlotnik(a)redhat.com >
>> > > > > > wrote:
>> > > > > > > >
>> > > > > > > >> ansible-runner was added in 4.4, you
shouldn't need in 4.3
>> > > > > > > >>
>> > > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor
Gavrilov <
>> > > > > fgavrilo(a)redhat.com >
>> > > > > > > >> wrote:
>> > > > > > > >> >
>> > > > > > > >> > Hi Sandro,
>> > > > > > > >> >
>> > > > > > > >> > Thanks for the suggestion, but it
seems to not help much.
>> > > > > > > >> >
>> > > > > > > >> > ansible-runner-service-dev still
can't be found, I
>> checked
>> > > repos
>> > > > > > that
>> > > > > > > >> are installed from
>> > > > > > > >>
>> > > > >
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
>> > > > > > > >> and haven't found similarly names
packages either...
>> > > > > > > >> >
>> > > > > > > >> > $ sudo yum install
ansible-runner-service-dev
>> > > > > > > >> > Loaded plugins: fastestmirror
>> > > > > > > >> > Repository centos-sclo-rh-release is
listed more than
>> once in
>> > > the
>> > > > > > > >> configuration
>> > > > > > > >> > Repository sac-gluster-ansible is
listed more than once
>> in
>> > > the
>> > > > > > > >> configuration
>> > > > > > > >> > Determining fastest mirrors
>> > > > > > > >> > ovirt-4.3-epel/x86_64/metalink
>> > > > > > > >>
>> > > > > > > >> | 30 kB 00:00:00
>> > > > > > > >> > ovirt-master-epel/x86_64/metalink
>> > > > > > > >>
>> > > > > > > >> | 30 kB 00:00:00
>> > > > > > > >> > * base: ftp.sh.cvut.cz
>> > > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
>> > > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
>> > > > > > > >> > * extras: ftp.sh.cvut.cz
>> > > > > > > >> > * ovirt-4.3-epel:
mirror.karneval.cz
>> > > > > > > >> > * ovirt-4.3-snapshot:
ftp.plusline.net
>> > > > > > > >> > * ovirt-4.3-snapshot-static:
ftp.plusline.net
>> > > > > > > >> > * ovirt-master-epel:
mirror.karneval.cz
>> > > > > > > >> > * ovirt-master-snapshot:
ftp.plusline.net
>> > > > > > > >> > * ovirt-master-snapshot-static:
ftp.plusline.net
>> > > > > > > >> > * updates: ftp.sh.cvut.cz
>> > > > > > > >> > base
>> > > > > > > >>
>> > > > > > > >> | 3.6 kB 00:00:00
>> > > > > > > >> > centos-opstools-release
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > centos-ovirt-common-testing
>> > > > > > > >>
>> > > > > > > >> | 3.4 kB 00:00:00
>> > > > > > > >> > centos-ovirt44-testing
>> > > > > > > >>
>> > > > > > > >> | 3.4 kB 00:00:00
>> > > > > > > >> > centos-qemu-ev-release
>> > > > > > > >>
>> > > > > > > >> | 3.4 kB 00:00:00
>> > > > > > > >> > centos-sclo-rh
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > centos-sclo-rh-release
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > centos-sclo-sclo
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > epel-apache-maven
>> > > > > > > >>
>> > > > > > > >> | 3.3 kB 00:00:00
>> > > > > > > >> > extras
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-centos-gluster6
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-centos-opstools
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-centos-ovirt43
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-centos-qemu-ev
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-epel
>> > > > > > > >>
>> > > > > > > >> | 5.3 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-snapshot
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-snapshot-static
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-virtio-win-latest
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-master-centos-gluster6
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> >
ovirt-master-centos-opstools-testing
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-master-epel
>> > > > > > > >>
>> > > > > > > >> | 5.3 kB 00:00:00
>> > > > > > > >> > ovirt-master-snapshot
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-master-snapshot-static
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-master-virtio-win-latest
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirtwebui-ovirt-web-ui-master
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > sac-gluster-ansible
>> > > > > > > >>
>> > > > > > > >> | 3.3 kB 00:00:00
>> > > > > > > >> > updates
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > (1/32): base/7/x86_64/group_gz
>> > > > > > > >>
>> > > > > > > >> | 165 kB 00:00:00
>> > > > > > > >> > (2/32): base/7/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 6.0 MB 00:00:00
>> > > > > > > >> > (3/32):
centos-sclo-rh/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 4.2 MB 00:00:00
>> > > > > > > >> > (4/32):
centos-qemu-ev-release/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 9.3 kB 00:00:00
>> > > > > > > >> > (5/32):
centos-sclo-sclo/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 344 kB 00:00:00
>> > > > > > > >> > (6/32):
centos-ovirt44-testing/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 1.1 kB 00:00:01
>> > > > > > > >> > (7/32): extras/7/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 164 kB 00:00:00
>> > > > > > > >> > (8/32):
centos-opstools-release/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 429 kB 00:00:01
>> > > > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 101 kB 00:00:01
>> > > > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 116 kB 00:00:00
>> > > > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 73 kB 00:00:00
>> > > > > > > >> > (12/32):
ovirt-4.3-epel/x86_64/group_gz
>> > > > > > > >>
>> > > > > > > >> | 90 kB 00:00:00
>> > > > > > > >> > (13/32):
epel-apache-maven/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 5.0 kB 00:00:01
>> > > > > > > >> > (14/32):
ovirt-4.3-epel/x86_64/updateinfo
>> > > > > > > >>
>> > > > > > > >> | 1.0 MB 00:00:00
>> > > > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 429 kB 00:00:00
>> > > > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 211 kB 00:00:00
>> > > > > > > >> > (17/32):
ovirt-4.3-snapshot-static/7/primary_db
>> > > > > > > >>
>> > > > > > > >> | 3.4 kB 00:00:00
>> > > > > > > >> > (18/32):
ovirt-4.3-snapshot/7/primary_db
>> > > > > > > >>
>> > > > > > > >> | 109 kB 00:00:00
>> > > > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 116 kB 00:00:00
>> > > > > > > >> > (20/32):
ovirt-4.3-epel/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 6.7 MB 00:00:00
>> > > > > > > >> > (21/32):
ovirt-master-epel/x86_64/group_gz
>> > > > > > > >>
>> > > > > > > >> | 90 kB 00:00:00
>> > > > > > > >> > (22/32):
ovirt-master-epel/x86_64/updateinfo
>> > > > > > > >>
>> > > > > > > >> | 1.0 MB 00:00:00
>> > > > > > > >> > (23/32):
ovirt-master-snapshot/7/primary_db
>> > > > > > > >>
>> > > > > > > >> | 54 kB 00:00:00
>> > > > > > > >> > (24/32):
ovirt-4.3-virtio-win-latest/primary_db
>> > > > > > > >>
>> > > > > > > >> | 7.6 kB 00:00:01
>> > > > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
>> > > > > > > >>
>> > > > > > > >> | 4.6 kB 00:00:00
>> > > > > > > >> > (26/32):
ovirt-master-epel/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 6.7 MB 00:00:00
>> > > > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
>> > > > > > > >>
>> > > > > > > >> | 7.6 kB 00:00:00
>> > > > > > > >> > (28/32):
centos-sclo-rh-release/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 4.2 MB 00:00:03
>> > > > > > > >> > (29/32):
updates/7/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 6.7 MB 00:00:00
>> > > > > > > >> > (30/32):
>> > > ovirt-master-centos-opstools-testing/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 611 kB 00:00:01
>> > > > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 2.3 kB 00:00:00
>> > > > > > > >> > (32/32):
sac-gluster-ansible/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 13 kB 00:00:00
>> > > > > > > >> > No package
ansible-runner-service-dev available.
>> > > > > > > >> > Error: Nothing to do
>> > > > > > > >> >
>> > > > > > > >> >
>> > > > > > > >> > Fedor
>> > > > > > > >> >
>> > > > > > > >> > ----- Original Message -----
>> > > > > > > >> > From: "Sandro Bonazzola"
< sbonazzo(a)redhat.com >
>> > > > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
>> > > > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
>> > > > > > devel(a)ovirt.org >
>> > > > > > > >> > Sent: Tuesday, March 10, 2020
5:56:53 PM
>> > > > > > > >> > Subject: Re: [ovirt-devel] Re:
what's up with
>> > > > > > > >> ansible-runner-service-dev package?
>> > > > > > > >> >
>> > > > > > > >> > Il giorno mar 10 mar 2020 alle ore
15:39 Fedor Gavrilov <
>> > > > > > > >> fgavrilo(a)redhat.com >
>> > > > > > > >> > ha scritto:
>> > > > > > > >> >
>> > > > > > > >> > > Thanks for the response, Eyal!
>> > > > > > > >> > >
>> > > > > > > >> > > I already had ovirt-master repo
installed, but updated
>> > > > > everything
>> > > > > > > >> just in
>> > > > > > > >> > > case.
>> > > > > > > >> > > I even tried both yum and dnf
(since yum on centos was
>> > > giving
>> > > > > me
>> > > > > > > lots
>> > > > > > > >> of
>> > > > > > > >> > > grief before and I learned
their behaviour differs,
>> > > especially
>> > > > > > when
>> > > > > > > it
>> > > > > > > >> > > comes to bugs) but none
works...
>> > > > > > > >> > >
>> > > > > > > >> > > >No package
ansible-runner-service-dev available.
>> > > > > > > >> > > >No match for argument:
ansible-runner-service-dev
>> > > > > > > >> > >
>> > > > > > > >> > > Fedor
>> > > > > > > >> > >
>> > > > > > > >> > >
>> > > > > > > >> > Looks like you're trying to
install
>> ovirt-master-snapshot on
>> > > el7.
>> > > > > > > >> > It won't work.
>> > > > > > > >> > Master is not supporting el7
anymore.
>> > > > > > > >> > You can use 4.3 snapshot rpm at :
>> > > > > > > >> >
>> > > > > >
>> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
>> > > > > > > >> if
>> > > > > > > >> > you need to stay on el7.
>> > > > > > > >> >
>> > > > > > > >> >
>> > > > > > > >> > > ----- Original Message -----
>> > > > > > > >> > > From: "Eyal
Shenitzky" < eshenitz(a)redhat.com >
>> > > > > > > >> > > To: "Fedor Gavrilov"
< fgavrilo(a)redhat.com >
>> > > > > > > >> > > Cc: "devel" <
devel(a)ovirt.org >
>> > > > > > > >> > > Sent: Tuesday, March 10, 2020
2:24:16 PM
>> > > > > > > >> > > Subject: Re: [ovirt-devel]
what's up with
>> > > > > > ansible-runner-service-dev
>> > > > > > > >> > > package?
>> > > > > > > >> > >
>> > > > > > > >> > > Hi Fedor,
>> > > > > > > >> > >
>> > > > > > > >> > > Please try:
>> > > > > > > >> > > 1. dnf install
>> > > > > > > >> > >
>> > > > >
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>> > > > > > > >> > > 2. dnf update
>> > > > > > > >> > > 3. dnf install
ansible-runner-service-dev
>> > > > > > > >> > > 4. flow the instruction from
thread 'New dependency for
>> > > > > > development
>> > > > > > > >> > > environment'
>> > > > > > > >> > > The
>> > > > > > > >> > >
>> > > > > > > >> > > On Tue, 10 Mar 2020 at 14:55,
Fedor Gavrilov <
>> > > > > fgavrilo(a)redhat.com
>> > > > > > >
>> > > > > > > >> wrote:
>> > > > > > > >> > >
>> > > > > > > >> > > > Hi everyone,
>> > > > > > > >> > > >
>> > > > > > > >> > > > After I screwed up my dev
environment beyond repair I
>> > > have to
>> > > > > > set
>> > > > > > > >> it up
>> > > > > > > >> > > > again and I see something
I haven't last time
>> (CentOS 7):
>> > > > > > > >> > > >
>> > > > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
>> > > > > > > >> > > > Loaded plugins:
fastestmirror
>> > > > > > > >> > > > Loading mirror speeds from
cached hostfile
>> > > > > > > >> > > > * base:
mirror.hosting90.cz
>> > > > > > > >> > > > * centos-sclo-rh:
mirror.hosting90.cz
>> > > > > > > >> > > > * centos-sclo-sclo:
mirror.hosting90.cz
>> > > > > > > >> > > > * extras:
mirror.hosting90.cz
>> > > > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
>> > > > > > > >> > > > * ovirt-master-snapshot:
ftp.nluug.nl
>> > > > > > > >> > > > *
ovirt-master-snapshot-static: ftp.nluug.nl
>> > > > > > > >> > > > * updates:
mirror.hosting90.cz
>> > > > > > > >> > > > No package
ansible-runner-service-dev available.
>> > > > > > > >> > > >
>> > > > > > > >> > > > Maybe something's
missing from my notes, but where
>> did it
>> > > go?
>> > > > > > > >> Should I
>> > > > > > > >> > > add
>> > > > > > > >> > > > some repo?
>> > > > > > > >> > > >
>> > > > > > > >> > > > Fedor
>> > > > > > > >> > > >
_______________________________________________
>> > > > > > > >> > > > Devel mailing list --
devel(a)ovirt.org
>> > > > > > > >> > > > To unsubscribe send an
email to
>> devel-leave(a)ovirt.org
>> > > > > > > >> > > > Privacy Statement:
>> > > https://www.ovirt.org/privacy-policy.html
>> > > > > > > >> > > > oVirt Code of Conduct:
>> > > > > > > >> > > >
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > >> > > > List Archives:
>> > > > > > > >> > > >
>> > > > > > > >> > >
>> > > > > > > >>
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
>> > > > > > > >> > > >
>> > > > > > > >> > >
>> > > > > > > >> > >
>> > > > > > > >> > > --
>> > > > > > > >> > > Regards,
>> > > > > > > >> > > Eyal Shenitzky
>> > > > > > > >> > >
_______________________________________________
>> > > > > > > >> > > Devel mailing list --
devel(a)ovirt.org
>> > > > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > >> > > Privacy Statement:
>> > > https://www.ovirt.org/privacy-policy.html
>> > > > > > > >> > > oVirt Code of Conduct:
>> > > > > > > >> > >
>> https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > >> > > List Archives:
>> > > > > > > >> > >
>> > > > > > > >>
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
>> > > > > > > >> > >
>> > > > > > > >> >
>> > > > > > > >> >
>> > > > > > > >> > --
>> > > > > > > >> >
>> > > > > > > >> > Sandro Bonazzola
>> > > > > > > >> >
>> > > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA
R&D RHV
>> > > > > > > >> >
>> > > > > > > >> > Red Hat EMEA <
https://www.redhat.com/ >
>> > > > > > > >> >
>> > > > > > > >> > sbonazzo(a)redhat.com
>> > > > > > > >> > < https://www.redhat.com/
>*Red Hat respects your work
>> life
>> > > > > balance.
>> > > > > > > >> > Therefore there is no need to answer
this email out of
>> your
>> > > > > office
>> > > > > > > >> hours.
>> > > > > > > >> > <
https://mojo.redhat.com/docs/DOC-1199578 >*
>> > > > > > > >> >
_______________________________________________
>> > > > > > > >> > Devel mailing list --
devel(a)ovirt.org
>> > > > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > >> > Privacy Statement:
>> https://www.ovirt.org/privacy-policy.html
>> > > > > > > >> > oVirt Code of Conduct:
>> > > > > > > >>
>> https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > >> > List Archives:
>> > > > > > > >>
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
>> > > > > > > >>
_______________________________________________
>> > > > > > > >> Devel mailing list -- devel(a)ovirt.org
>> > > > > > > >> To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > >> Privacy Statement:
>> https://www.ovirt.org/privacy-policy.html
>> > > > > > > >> oVirt Code of Conduct:
>> > > > > > > >>
>> https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > >> List Archives:
>> > > > > > > >>
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
>> > > > > > > >>
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > --
>> > > > > > > > Regards,
>> > > > > > > > Eyal Shenitzky
>> > > > > > > >
_______________________________________________
>> > > > > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > > Privacy Statement:
>> https://www.ovirt.org/privacy-policy.html
>> > > > > > > > oVirt Code of Conduct:
>> > > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > > List Archives:
>> > > > > > > >
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
>> > > > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > > --
>> > > > > > > Martin Perina
>> > > > > > > Manager, Software Engineering
>> > > > > > > Red Hat Czech s.r.o.
>> > > > > > > _______________________________________________
>> > > > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> > > > > > > oVirt Code of Conduct:
>> > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > List Archives:
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
>> > > > > > >
>> > > > > > >
>> > > > > >
>> > > > > > --
>> > > > > > Martin Perina
>> > > > > > Manager, Software Engineering
>> > > > > > Red Hat Czech s.r.o.
>> > > > > >
>> > > > > >
>> > > > >
>> > > > > --
>> > > > > Martin Perina
>> > > > > Manager, Software Engineering
>> > > > > Red Hat Czech s.r.o.
>> > > > >
>> > > > >
>> > > > >
>> > > > > --
>> > > > > Martin Perina
>> > > > > Manager, Software Engineering
>> > > > > Red Hat Czech s.r.o.
>> > > > >
>> > > > > _______________________________________________
>> > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> > > > > oVirt Code of Conduct:
>> > > > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > > List Archives:
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
>> > > > > _______________________________________________
>> > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> > > > > oVirt Code of Conduct:
>> > > > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > > List Archives:
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
>> > > > > _______________________________________________
>> > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> > > > > oVirt Code of Conduct:
>> > > > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > > List Archives:
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
>> > > > >
>> > > >
>> > > >
>> > > > _______________________________________________
>> > > > Devel mailing list -- devel(a)ovirt.org
>> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
>> > > > _______________________________________________
>> > > > Devel mailing list -- devel(a)ovirt.org
>> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
>> > > _______________________________________________
>> > > Devel mailing list -- devel(a)ovirt.org
>> > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
>> > >
>> > >
>> > > _______________________________________________
>> > > Devel mailing list -- devel(a)ovirt.org
>> > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
>> > > _______________________________________________
>> > > Devel mailing list -- devel(a)ovirt.org
>> > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
>> > >
>> >
>> >
>> > --
>> > Martin Perina
>> > Manager, Software Engineering
>> > Red Hat Czech s.r.o.
>> > _______________________________________________
>> > Devel mailing list -- devel(a)ovirt.org
>> > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> > List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
>> _______________________________________________
>> Devel mailing list -- devel(a)ovirt.org
>> To unsubscribe send an email to devel-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5...
>> _______________________________________________
>> Devel mailing list -- devel(a)ovirt.org
>> To unsubscribe send an email to devel-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJ...
>>
>
>
> --
> Regards,
> Eyal Shenitzky
>
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/2IIVS6MVVRZ...
1:18 p.m.
New subject: what's up with ansible-runner-service-dev package?
Thanks, Benny!
When I try to do that, I get
2020-04-01 12:14:49,346+02 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-6)
[eaddc8ee-a015-4093-a488-64384362141b] Unexpected return value: Status [code=-32603,
message=Internal JSON-RPC error: {'reason': "type object
'LinuxBridge' has no attribute 'STP'"}]
2020-04-01 12:14:49,346+02 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand] (default task-6)
[eaddc8ee-a015-4093-a488-64384362141b] Failed in 'HostSetupNetworksVDS' method
in the logs. I wonder if something is wrong with my FC30 host setup then...
Fedor
----- Original Message -----
From: "Benny Zlotnik" <bzlotnik(a)redhat.com>
To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana Elfassy"
<delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
Sent: Tuesday, March 31, 2020 5:40:06 PM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
usually means you don't have the ovirtmgmt bridge on the host, going
to host -> network interfaces -> setup host networks should set it up
for you
On Tue, Mar 31, 2020 at 6:12 PM Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
Ok, after doing setup again I was able to get past ansible runner problem as it seems.
Not sure what the difference is other than the fact that I install ovirt-master repo first
and thus some dependencies are likely to come from there instead of standard fedora 30
repo.
There seems to be one last thing, though:
2020-03-31 16:00:01,430+02 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c] Host
'banana' is set to Non-Operational, it is missing the following networks:
'ovirtmgmt'
2020-03-31 16:00:01,474+02 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-34) [3b59703c]
EVENT_ID: VDS_SET_NONOPERATIONAL_NETWORK(519), Host banana does not comply with the
cluster Default networks, the following networks are missing on host: 'ovirtmgmt'
I'm sure I've seen such error some time ago, but can't remember what it might
mean...
Thanks,
Fedor
----- Original Message -----
From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
To: "Eyal Shenitzky" <eshenitz(a)redhat.com>
Cc: "Fedor Gavrilov" <fgavrilo(a)redhat.com>, "Nir Soffer"
<nsoffer(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <devel(a)ovirt.org>
Sent: Monday, March 23, 2020 10:35:49 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
On Mon, Mar 23, 2020 at 11:29 AM Eyal Shenitzky <eshenitz(a)redhat.com> wrote:
> I encounter that problem when I didn't configure my ansible runner as
> needed
>
>
> Please check that your conf file (/etc/ansible-runner-service/config.yaml)
> is as follow:
>
> ---
>
>
>
>
>
> *version: 1 playbooks_root_dir:
>
'/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> ssh_private_key:
>
'/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> port: 50001 target_user: root*
>
If it still doesn't work try doing what I suggested with the breakpoint as
a workaround.
>
>
>
> On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo(a)redhat.com> wrote:
>
>> I just tried installing fedora 30 host with no pre-installed cockpit,
>> just ovirt-release-master repo. Same as always:
>>
>> 2020-03-20 14:01:30,134+01 ERROR
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID:
>> VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute
>> Ansible host-deploy role: Internal server error, please check Ansible
>> runner error log.. Please check logs for more details:
>>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.
>>
>> No logs as usual. The error must be on the engine side somewhere...
>>
>> ----- Original Message -----
>> From: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> To: "Nir Soffer" <nsoffer(a)redhat.com>
>> Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana
Elfassy" <
>> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
>> Sent: Thursday, March 19, 2020 4:20:23 PM
>> Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
>> package?
>>
>> Thanks for the response, Nir.
>>
>> >You host installed without SSH server enabled?
>> I've been virtualizing both engine and host vm since I joined the team,
>> so enabling ssh access is the first thing I do after OS is installed.
>>
>> >Not sure why you need cockpit.
>> >But you need:
>> >sudo dnf install
>> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>>
>> I did install ovirt-release-master rpm on the host and somehow managed to
>> not copy that (facepalm). But believe me it's there.
>> Regarding cockpit, I was following what's written in
>> https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts...
>>
>> >Why not:
>> >sudo yum install
>> >https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>>
>> Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it
>> would silently fail when you try installing from the URL :D
>>
>> >Did you to add centos 7.7 host? 8.1?
>> Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host
>> (that's the lengths I went to get this thing working!). Both fail.
>>
>> >Look at the full half of the glass, you have engine.
>> Nice one. Though I'm afraid that part might be poisoned since host
>> configuration that worked for me for a year now instantly fails no matter
>> what OS is used...
>>
>> Fedor
>>
>> ----- Original Message -----
>> From: "Nir Soffer" <nsoffer(a)redhat.com>
>> To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> Cc: "Martin Perina" <mperina(a)redhat.com>, "Liran
Rotenberg" <
>> lrotenbe(a)redhat.com>, "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <
>> devel(a)ovirt.org>
>> Sent: Thursday, March 19, 2020 2:31:39 AM
>> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
>> package?
>>
>> On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
>> wrote:
>> >
>> > Wow. I did not expect that, but after clean setup the error is still
>> there.
>> > I can't add fedora 30 host to fedora 30 engine.
>> >
>> > Here is a full bash history for the host machine since OS was installed:
>> >
>> > sudo yum update
>>
>> Good
>>
>> > sudo systemctl enable sshd
>>
>> You host installed without SSH server enabled?
>>
>> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
>> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
>> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
>> > sudo nmcli connection mod ens3 ipv4.method manual
>>
>> You can configure the network from the installer, less painful.
>>
>> > sudo vi /etc/hosts
>> > sudo poweroff
>> > sudo yum install cockpit-ovirt-dashboard
>> > sudo systemctl enable cockpit.socket --now
>>
>> Not sure why you need cockpit.
>>
>> But you need:
>>
>> sudo dnf install
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>>
>> >
>> > Same for the engine machine (I was installing dependencies separetely
>> because 1. yum bugs & 2. I was checking if versions are correct one by
one):
>> >
>> > sudo yum update
>> > sudo systemctl enable sshd
>> > sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24
>> > sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
>> > sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
>> > sudo nmcli connection mod ens3 ipv4.method manual
>> > sudo vi /etc/hosts
>> > sudo poweroff
>> > sudo yum install java-11-openjdk-devel
>> > sudo yum install java-1.8.0-openjdk-headless
>> > sudo yum install mailcap
>> > sudo yum install unzip
>> > sudo yum install openssl
>> > sudo yum install bind-utils
>> > sudo yum install postgresql-server
>> > sudo yum install postgresql
>> > sudo yum install postgresql-contrib
>> > sudo yum install python2-dateutil
>> > sudo yum install python3-dateutil
>> > sudo yum install python2-m2crypto
>> > sudo yum install python3-m2crypto
>> > sudo yum install python2-psycopg2
>> > sudo yum install python3-psycopg2
>> > sudo yum install python2-jinja2
>> > sudo yum install python3-jinja2
>> > sudo yum install python2-libxml2
>> > sudo yum install python3-libxml2
>> > sudo yum install python2-daemon
>> > sudo yum install python3-daemon
>>
>> > wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>> > sudo yum install ./ovirt-release-master.rpm -y
>>
>> Why not:
>>
>> sudo yum install
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>>
>> Also, you want to instal this first - before you install other
>> packages, so you get packages
>> from ovirt dependencies.
>>
>> > sudo yum install otopi
>> > sudo yum install python3-ovirt-setup-lib
>> > sudo yum install maven
>> > sudo yum install ansible
>> > sudo yum install ansible-runner-service-dev
>> > sudo yum install ovirt-ansible-roles
>> > sudo yum install ovirt-engine-metrics
>> > sudo yum install python3-ovirt-engine-sdk4
>> > sudo yum install pyflakes
>> > sudo yum install python-pep8
>> > sudo yum install python3-docker
>> > sudo yum install python3-isort
>> > sudo yum install gcc
>> > sudo yum install python2-devel
>> > sudo yum install systemd-python
>> > sudo yum install python-webob
>> > sudo yum install redhat-rpm-config
>> > sudo yum install scl-utils
>> > sudo yum install ovirt-imageio-common
>>
>> Not needed, the ovirt-imageio-proxy will bring it.
>>
>> > sudo yum install make
>> > sudo yum install python-requests
>> > sudo yum install python-subprocess32
>> > sudo alternatives --config java
>> > sudo yum install ovirt-engine-wildfly
>> > sudo yum install ovirt-engine-wildfly-overlay
>> > sudo vi /etc/security/limits.d/10-nofile.conf
>> > sudo firewall-cmd --add-port=8080/tcp --permanent
>> > sudo firewall-cmd --add-port=8443/tcp --permanent
>> > sudo firewall-cmd --add-port=8787/tcp --permanent
>> > sudo firewall-cmd --add-port=5432/tcp --permanent
>> > sudo firewall-cmd --add-port=54323/tcp --permanent
>> > sudo firewall-cmd --reload
>> > sudo postgresql-setup --initdb --unit postgresql
>> > sudo vi /var/lib/pgsql/data/pg_hba.conf
>> > sudo vi /var/lib/pgsql/data/postgresql.conf
>> > sudo systemctl enable postgresql --now
>> > sudo systemctl status postgresql
>> > sudo su - postgres -c "psql -d template1"
>> > sudo su - postgres -c "psql -d engine"
>>
>> sudo -u postgres -i ?
>>
>> > sudo vi /etc/ansible-runner-service/config.yaml
>> > sudo systemctl enable ansible-runner-service --now
>> > sudo systemctl status ansible-runner-service
>> > sudo yum install git
>> > mkdir ~/git && cd ~/git
>> > git clone git://gerrit.ovirt.org/ovirt-imageio
>> > git clone git://gerrit.ovirt.org/ovirt-engine
>> > vi ~/.bashrc
>> > sudo reboot
>> > cd ovirt-engine/
>> > make clean install-dev PREFIX="/home/apple/ovirt-engine"
SKIP_CHECKS=1
>> > cd ~/git/ovirt-imageio/
>> > make
>> > cd proxy/
>> > make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
>> > ~/ovirt-engine/bin/engine-setup
>> > ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
>> > vi ~/.bashrc
>> > vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
>> > sudo poweroff
>> >
>> > I don't know what's wrong. It does not work.
>>
>> Look at the full half of the glass, you have engine.
>>
>> Did you to add centos 7.7 host? 8.1?
>>
>> > ----- Original Message -----
>> > From: "Martin Perina" <mperina(a)redhat.com>
>> > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> > Cc: "Liran Rotenberg" <lrotenbe(a)redhat.com>, "Dana
Elfassy" <
>> delfassy(a)redhat.com>, "devel" <devel(a)ovirt.org>
>> > Sent: Wednesday, March 18, 2020 3:15:15 PM
>> > Subject: Re: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev package?
>> >
>> > On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo(a)redhat.com>
>> wrote:
>> >
>> > > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder
>> why I
>> > > haven't got this error sooner.
>> > > Also, given the workaround, does that mean that ansible-lint is
>> optional?
>> > >
>> >
>> > Yes, same as pep8, pyflake and other build check tools
>> >
>> > >
>> > > ----- Original Message -----
>> > > From: "Liran Rotenberg" <lrotenbe(a)redhat.com>
>> > > To: "Fedor Gavrilov" <fgavrilo(a)redhat.com>
>> > > Cc: "Dana Elfassy" <delfassy(a)redhat.com>,
"devel" <devel(a)ovirt.org>
>> > > Sent: Wednesday, March 18, 2020 2:21:14 PM
>> > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
>> > > package?
>> > >
>> > >
>> > >
>> > > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
>> >
>> > > wrote:
>> > >
>> > >
>> > > Ok, thanks for the reaction :)
>> > >
>> > > Getting back to the main topic, can anyone (please) try to compile
the
>> > > engine master now?
>> > > That's what I get when I try to:
>> > >
>> > > [602] Don't compare to empty string
>> > >
>> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
>> > >
>> > > when: hosted_engine_vm_cluster_name_result.stdout | trim !=
""
>> > >
>> > > [602] Don't compare to empty string
>> > >
>> /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
>> > >
>> > > when: hosted_engine_vm_cluster_name_result.stdout | trim ==
"" or
>> > > hosted_engine_vm_cluster_name_result.stdout is undefined
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
>> > >
>> > > Task/Handler: Install collectd package
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
>> > >
>> > > Task/Handler: Install collectd plugins on engine
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
>> > >
>> > > Task/Handler: Install collectd plugins on hosts
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
>> > >
>> > > Task/Handler: Install collectd write_syslog plugin
>> > >
>> > > [303] systemctl used in place of systemd module
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
>> > >
>> > > Task/Handler: Check if fluentd is running
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
>> > >
>> > > - fluentd_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
>> > >
>> > > changed_when: fluentd_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
>> > >
>> > > - fluentd_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
>> > >
>> > > when: fluentd_is_running|default(false)|bool == false
>> > >
>> > > [303] systemctl used in place of systemd module
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
>> > >
>> > > Task/Handler: Check if rsyslog is running
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
>> > >
>> > > - rsyslog_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
>> > >
>> > > changed_when: rsyslog_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
>> > >
>> > > - rsyslog_is_running|default(false)|bool == true
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
>> > >
>> > > when: rsyslog_is_running|default(false)|bool == false
>> > >
>> > > [303] systemctl used in place of systemd module
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
>> > >
>> > > Task/Handler: Check if collectd is running
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
>> > >
>> > > Task/Handler: Install fluentd package
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
>> > >
>> > > Task/Handler: Install fluentd engine plugins
>> > >
>> > > [403] Package installs should not use latest
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
>> > >
>> > > Task/Handler: Install fluentd host plugins
>> > >
>> > > [601] Don't compare to literal True/False
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
>> > >
>> > > when: stat_result.stat.exists == True
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
>> > >
>> > > Task/Handler: Get ovirt_engine_fqdn
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
>> > >
>> > > Task/Handler: Get ovirt_engine_db_name
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
>> > >
>> > > Task/Handler: Get ovirt_engine_db_user
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
>> > >
>> > > Task/Handler: Get ovirt_engine_history_db_name
>> > >
>> > > [301] Commands should not change things if nothing needs doing
>> > >
>>
/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
>> > >
>> > > Task/Handler: Get ovirt_engine_history_db_user
>> > >
>> > > make[1]: *** [Makefile:401: validations] Error 2
>> > > make[1]: Leaving directory '/home/apple/git/ovirt-engine'
>> > > make: *** [Makefile:584: all-dev] Error 2
>> > >
>> > > An extensive lecture from ansible, but what is this even about?
>> > > https://bugzilla.redhat.com/show_bug.cgi?id=1804268
>> > >
>> > >
>> > >
>> > > ...
>> > >
>> > >
>> > > ----- Original Message -----
>> > > From: "Nir Soffer" < nsoffer(a)redhat.com >
>> > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
>> > > Cc: "Liran Rotenberg" < lrotenbe(a)redhat.com >,
"Dana Elfassy" <
>> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
>> > > Sent: Wednesday, March 18, 2020 11:45:28 AM
>> > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
>> > > package?
>> > >
>> > > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov <
fgavrilo(a)redhat.com
>> >
>> > > wrote:
>> > > >
>> > > > For the time being I'm doing super careful clean installation
of
>> both
>> > > engine and host in hopes of getting dev env working again... results
>> are
>> > > yet to be seen.
>> > > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt
>> master
>> > > rpm for Fedora 30. Correct name for the package is
>> > > python3-ovirt-engine-sdk4. And more examples like that with random
>> package
>> > > renamings.
>> > > >
>> > > > README definitely needs an update. If you ask me, I would rather
>> provide
>> > > users with a single version (Fedora 30 only) of dev installation docs
>> that
>> > > works rather than with two versions that don't.
>> > >
>> > > Please do the update.
>> > >
>> > > Hopefully you will have more luck, my last README patch was abandoned
>> > > after
>> > > it was neglected by engine maintainers.
>> > > https://gerrit.ovirt.org/c/106467/
>> > >
>> > > > Are there any reasons to keep CentOS 7 info there that's
irrelevant
>> now?
>> > >
>> > > It should be dropped now.
>> > >
>> > > > I can rework the docs for FC30 eventually if no one minds.
>> > >
>> > > There is already a working fedora 30 instructions in the bottom of
the
>> > > readme. It used to
>> > > work when Amit added it.
>> > >
>> > > > Or, if plans are to move to CentOS 8, maybe another brave soul
can
>> do
>> > > that.
>> > > > Fedor
>> > > >
>> > > > ----- Original Message -----
>> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
>> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
>> > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
>> devel(a)ovirt.org >
>> > > > Sent: Tuesday, March 17, 2020 1:13:48 PM
>> > > > Subject: [ovirt-devel] Re: what's up with
ansible-runner-service-dev
>> > > package?
>> > > >
>> > > >
>> > > >
>> > > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com >
>> > > wrote:
>> > > >
>> > > >
>> > > > I just tried installing on Fedora 30 host and error stays the
same,
>> so
>> > > it's probably not as OS. Might try clean setup next, what else...
>> > > >
>> > > > Liran, do you see anything of interest when you journalctl -u
>> > > ansible-runner-service | grep fatal ?
>> > > > No, we do see a trackback on the command pointing out to
>> > > python3.7/site-packages/runner_service/services/jobs.py
>> > > > But, because breakpoint that only makes things slower, I think
it's
>> > > timing/locking issue somehow.
>> > > >
>> > > >
>> > > >
>> > > > Fedor
>> > > >
>> > > > ----- Original Message -----
>> > > > From: "Liran Rotenberg" < lrotenbe(a)redhat.com >
>> > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com >
>> > > > Cc: "Martin Perina" < mperina(a)redhat.com >,
"Dana Elfassy" <
>> > > delfassy(a)redhat.com >, "devel" < devel(a)ovirt.org >
>> > > > Sent: Tuesday, March 17, 2020 12:49:32 PM
>> > > > Subject: Re: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev
>> > > package?
>> > > >
>> > > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com >
>> > > wrote:
>> > > >
>> > > > > I tried installing python 2 versions of some dependencies
in
>> addition
>> > > to
>> > > > > python 3 (as
>> > > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
>> > > > > is not clear about it at all. on Fedora 30 default versions
of
>> these
>> > > > > libraries you get when not specifying python vesion in the
name
>> are
>> > > python
>> > > > > 2.)
>> > > > > Now error looks slightly different :'D
>> > > > >
>> > > > > 2020-03-17 11:08:27,294+01 ERROR
>> > > > >
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> > > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e]
EVENT_ID:
>> > > > > VDS_INSTALL_FAILED(505), Host banana installation failed.
Internal
>> > > server
>> > > > > error, please check Ansible runner error log..
>> > > > >
>> > > > > Everything else stays the same, host install fails almost
>> immediately.
>> > > > > Does someone have any notes for Fedora 30 install they can
share?
>> > > > >
>> > > > I start seeing it too:
>> > > > ansible-runner-service-dev-1.0.1-1.fc30.noarch
>> > > > python3-ansible-runner-1.3.4-2.fc30.noarch
>> > > > engine:
>> > > > http://pastebin.test.redhat.com/845373
>> > > > of course no ansible log..
>> > > > This is what journalctl show:
>> > > > http://pastebin.test.redhat.com/845375
>> > > >
>> > > > After doing some debugging in the engine, after setting a
>> breakpoint in
>> > > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
>> > > Step-Over
>> > > > until the execution (lines 139-147) it does work. Without
breaking
>> point
>> > > > and making things slower it throws the error.
>>
> Here^
> > > >
>> > > > >
>> > > > > Thanks,
>> > > > > Fedor
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > From: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
>> > > > > To: "Martin Perina" < mperina(a)redhat.com >
>> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
>> devel(a)ovirt.org
>> > > >
>> > > > > Sent: Monday, March 16, 2020 3:52:47 PM
>> > > > > Subject: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev
>> > > > > package?
>> > > > >
>> > > > > Sorry, my bad, it was just under my nose. Systemctl is not
aware
>> of
>> > > > > gunicorn-3, but when I check journalctl for
>> ansible-runner-service I
>> > > see
>> > > > > the following:
>> > > > >
>> > > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner
Service.
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2992]
>> > > > > [INFO] Starting gunicorn 19.9.0
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2992]
>> > > > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2992]
>> > > > > [INFO] Using worker: sync
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2995]
>> > > > > [INFO] Booting worker with pid: 2995
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16
15:49:55
>> +0100]
>> > > [2997]
>> > > > > [INFO] Booting worker with pid: 2997
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
>> configuration
>> > > > > options from /etc/ansible-runner-service/config.yaml
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
>> playbooks_root_dir
>> > > to
>> > > > >
>> > >
>> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to
50001
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
target_user to
>> root
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
ssh_private_key
>> to
>> > > > >
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime
>> overrides
>> > > from
>> > > > > environment variables
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration
settings
>> > > > > overridden
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local
>> configuration
>> > > > > options from /etc/ansible-runner-service/config.yaml
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
>> playbooks_root_dir
>> > > to
>> > > > >
>> > >
>> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to
50001
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
target_user to
>> root
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting
ssh_private_key
>> to
>> > > > >
/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime
>> overrides
>> > > from
>> > > > > environment variables
>> > > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration
settings
>> > > > > overridden
>> > > > >
>> > > > > Is that any suspicious? :)
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > From: "Martin Perina" < mperina(a)redhat.com
>
>> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
>> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
>> devel(a)ovirt.org
>> > > >
>> > > > > Sent: Monday, March 16, 2020 3:36:40 PM
>> > > > > Subject: [ovirt-devel] Re: what's up with
>> ansible-runner-service-dev
>> > > > > package?
>> > > > >
>> > > > >
>> > > > >
>> > > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com
>> > > >
>> > > > > wrote:
>> > > > >
>> > > > >
>> > > > > Nothing since there is no such service (or similarly
named).
>> > > > > Package python3-gunicorn is installed though.
>> > > > >
>> > > > > After you start ansible-runner-service service, you should
see
>> similar
>> > > > > logs in journalctl:
>> > > > >
>> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15
15:28:01
>> +0100]
>> > > > > [1386] [INFO] Starting gunicorn 19.9.0
>> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15
15:28:01
>> +0100]
>> > > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
>> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15
15:28:01
>> +0100]
>> > > > > [1386] [INFO] Using worker: sync
>> > > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15
15:28:01
>> +0100]
>> > > > > [1496] [INFO] Booting worker with pid: 1496
>> > > > > And more if you execute some action from engine (like
install new
>> host
>> > > or
>> > > > > upgrade a host)
>> > > > >
>> > > > >
>> > > > >
>> > > > > So does that mean that something was supposed to register it
as a
>> > > service
>> > > > > but did not?
>> > > > >
>> > > > > Fedor
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > From: "Martin Perina" < mperina(a)redhat.com
>
>> > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
>> > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com >,
"devel" <
>> devel(a)ovirt.org
>> > > >
>> > > > > Sent: Monday, March 16, 2020 3:13:03 PM
>> > > > > Subject: Re: [ovirt-devel] Re: what's up with
>> > > ansible-runner-service-dev
>> > > > > package?
>> > > > >
>> > > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com
>> > > >
>> > > > > wrote:
>> > > > >
>> > > > > > FC30 dev env engine indeed :) I've done this before
on other
>> OS, so
>> > > > > unless
>> > > > > > there is a blindspot somewhere in my eye it should be
configured
>> > > fine.
>> > > > > >
>> > > > > > [apple@apple ~]$ sudo systemctl status
ansible-runner-service
>> > > > > > ● ansible-runner-service.service - Ansible Runner
Service
>> > > > > > Loaded: loaded
>> > > (/usr/lib/systemd/system/ansible-runner-service.service;
>> > > > > > enabled; vendor preset: disabled)
>> > > > > > Active: active (running) since Mon 2020-03-16 14:27:15
CET;
>> 16min
>> > > ago
>> > > > > > Main PID: 909 (gunicorn-3)
>> > > > > > Tasks: 9 (limit: 4915)
>> > > > > > Memory: 193.4M
>> > > > > > CGroup: /system.slice/ansible-runner-service.service
>> > > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
>> > > > > > -w 2 runner_service.wsgi:application
>> > > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
>> > > > > > -w 2 runner_service.wsgi:application
>> > > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b
localhost:50001
>> > > > > > -w 2 runner_service.wsgi:application
>> > > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
>> > > > > > --private-key
>> > > > > >
>> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
>> > > > > >
>> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
>> > > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
>> > > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
>> > > > > > --private-key
>> > > > > >
>> /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
>> > > > > >
>> /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
>> > > > > > └─2607 ssh -C -o ControlMaster=auto -o
ControlPersist=60s -o
>> > > > > > StrictHostKeyChecking=no -o Port=22 -o
>> > > > > >
>> > > > >
>> > >
>>
IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
>> > >
>> > > > >
>> > > > > > -o KbdInteractiveAu>
>> > > > > >
>> > > > > > And the config:
>> > > > > >
>> > > > > > ---
>> > > > > > version: 1
>> > > > > >
>> > > > > > # playbooks_root_dir
>> > > > > > # location of the playbooks that the service will
start
>> > > > > > playbooks_root_dir:
>> > > > > >
>> > > > >
>> > >
>>
'/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
>> > >
>> > > > >
>> > > > > > # port
>> > > > > > # tcp port for the service to listen to
>> > > > > > port: 50001
>> > > > > > #
>> > > > > > # ip_address
>> > > > > > # Specific IP address to bind to
>> > > > > > # ip_address: '0.0.0.0'
>> > > > > > target_user: root
>> > > > > > #event_cache_size: 3
>> > > > > > ssh_private_key:
>> > > > > >
>> '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
>> > > > > >
>> > > > > > /home/apple/ovirt-engine is where engine is
dev-installed. Not
>> sure
>> > > what
>> > > > > > else to check now...
>> > > > > >
>> > > > >
>> > > > > Anything strange in journalctl for gunicorn-3 service?
>> > > > >
>> > > > > >
>> > > > > >
>> > > > > > ----- Original Message -----
>> > > > > > From: "Martin Perina" < mperina(a)redhat.com
>
>> > > > > > To: "Fedor Gavrilov" < fgavrilo(a)redhat.com
>
>> > > > > > Cc: "Dana Elfassy" < delfassy(a)redhat.com
>, "devel" <
>> > > devel(a)ovirt.org >
>> > > > > > Sent: Monday, March 16, 2020 2:56:59 PM
>> > > > > > Subject: Re: [ovirt-devel] Re: what's up with
>> > > ansible-runner-service-dev
>> > > > > > package?
>> > > > > >
>> > > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov <
>> fgavrilo(a)redhat.com
>> > > >
>> > > > > > wrote:
>> > > > > >
>> > > > > > > Actually, it was too early for me to celebrate.
>> > > > > > >
>> > > > > > > On Fedora 30, the engine compiles and runs fine,
but when I
>> try
>> > > adding
>> > > > > > the
>> > > > > > > host installation fails almost immediately and I
get the
>> following
>> > > > > errors
>> > > > > > > in the engine logs:
>> > > > > > >
>> > > > > > > ERROR
>> > > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
>> > > > > > > (EE-ManagedThreadFactory-engine-Thread-1)
[bdc3c01] Host
>> > > installation
>> > > > > > > failed for host
'6402d350-69de-4181-bfc1-50e0e79c8228',
>> 'banana':
>> > > > > Failed
>> > > > > > to
>> > > > > > > execute Ansible host-deploy role: Internal server
error,
>> please
>> > > check
>> > > > > > > Ansible runner error log.. Please check logs for
more details:
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>> > >
>> > > > >
>> > > > > > >
>> > > > > > > There is nothing else. There is no file
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
/home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
>> > >
>> > > > >
>> > > > > > > Snapshot I'm using for the host is the same
that worked just
>> fine
>> > > when
>> > > > > > > engine was running on CentOS 7 and is CentOS 7
itself. Is
>> that an
>> > > > > issue?
>> > > > > > >
>> > > > > >
>> > > > > > As you mentioned building engine I assume you are using
engine
>> in
>> > > dev
>> > > > > env
>> > > > > > on FC30, right? If so, have you manually configured
>> > > > > ansible-runner-service
>> > > > > > for dev env as mentioned in
>> > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-run...
>> > > > > > ?
>> > > > > >
>> > > > > >
>> > > > > > > Thanks,
>> > > > > > > Fedor
>> > > > > > >
>> > > > > > > ----- Original Message -----
>> > > > > > > From: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
>> > > > > > > To: "Martin Perina" <
mperina(a)redhat.com >
>> > > > > > > Cc: "Dana Elfassy" <
delfassy(a)redhat.com >, "devel" <
>> > > devel(a)ovirt.org
>> > > > > >
>> > > > > > > Sent: Monday, March 16, 2020 12:37:44 PM
>> > > > > > > Subject: [ovirt-devel] Re: what's up with
>> > > ansible-runner-service-dev
>> > > > > > > package?
>> > > > > > >
>> > > > > > > Hi,
>> > > > > > >
>> > > > > > > Resolved through installing engine on Fedora 30.
From what I
>> > > > > understand,
>> > > > > > > CentOS 7 is not supported anymore.
>> > > > > > >
>> > > > > > > Fedor
>> > > > > > >
>> > > > > > > ----- Original Message -----
>> > > > > > > From: "Martin Perina" <
mperina(a)redhat.com >
>> > > > > > > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
>> > > > > > > Cc: "Benny Zlotnik" <
bzlotnik(a)redhat.com >, "Dana Elfassy" <
>> > > > > > > delfassy(a)redhat.com >, "devel" <
devel(a)ovirt.org >, "Eyal
>> > > Shenitzky"
>> > > > > <
>> > > > > > > eshenitz(a)redhat.com >
>> > > > > > > Sent: Monday, March 16, 2020 8:11:35 AM
>> > > > > > > Subject: Re: [ovirt-devel] Re: what's up with
>> > > > > ansible-runner-service-dev
>> > > > > > > package?
>> > > > > > >
>> > > > > > > Hi Fedor,
>> > > > > > >
>> > > > > > > ansible-runner-service-dev package is available
from
>> > > > > > >
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-run...
>> > > > > > > repos which is included in ovirt-master-release
package, which
>> > > > > > > includes all repositories necessary for oVirt
development:
>> > > > > > >
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>> > > > > > >
>> > > > > > > Was your issue resolved or not?
>> > > > > > >
>> > > > > > > Regards,
>> > > > > > > Martin
>> > > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky
<
>> > > eshenitz(a)redhat.com
>> > > > > >
>> > > > > > > wrote:
>> > > > > > >
>> > > > > > > > Adding also +Dana Elfassy <
delfassy(a)redhat.com >
>> > > > > > > >
>> > > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik
<
>> > > bzlotnik(a)redhat.com >
>> > > > > > wrote:
>> > > > > > > >
>> > > > > > > >> ansible-runner was added in 4.4, you
shouldn't need in 4.3
>> > > > > > > >>
>> > > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor
Gavrilov <
>> > > > > fgavrilo(a)redhat.com >
>> > > > > > > >> wrote:
>> > > > > > > >> >
>> > > > > > > >> > Hi Sandro,
>> > > > > > > >> >
>> > > > > > > >> > Thanks for the suggestion, but it
seems to not help much.
>> > > > > > > >> >
>> > > > > > > >> > ansible-runner-service-dev still
can't be found, I
>> checked
>> > > repos
>> > > > > > that
>> > > > > > > >> are installed from
>> > > > > > > >>
>> > > > >
>> https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
>> > > > > > > >> and haven't found similarly names
packages either...
>> > > > > > > >> >
>> > > > > > > >> > $ sudo yum install
ansible-runner-service-dev
>> > > > > > > >> > Loaded plugins: fastestmirror
>> > > > > > > >> > Repository centos-sclo-rh-release is
listed more than
>> once in
>> > > the
>> > > > > > > >> configuration
>> > > > > > > >> > Repository sac-gluster-ansible is
listed more than once
>> in
>> > > the
>> > > > > > > >> configuration
>> > > > > > > >> > Determining fastest mirrors
>> > > > > > > >> > ovirt-4.3-epel/x86_64/metalink
>> > > > > > > >>
>> > > > > > > >> | 30 kB 00:00:00
>> > > > > > > >> > ovirt-master-epel/x86_64/metalink
>> > > > > > > >>
>> > > > > > > >> | 30 kB 00:00:00
>> > > > > > > >> > * base: ftp.sh.cvut.cz
>> > > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
>> > > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
>> > > > > > > >> > * extras: ftp.sh.cvut.cz
>> > > > > > > >> > * ovirt-4.3-epel:
mirror.karneval.cz
>> > > > > > > >> > * ovirt-4.3-snapshot:
ftp.plusline.net
>> > > > > > > >> > * ovirt-4.3-snapshot-static:
ftp.plusline.net
>> > > > > > > >> > * ovirt-master-epel:
mirror.karneval.cz
>> > > > > > > >> > * ovirt-master-snapshot:
ftp.plusline.net
>> > > > > > > >> > * ovirt-master-snapshot-static:
ftp.plusline.net
>> > > > > > > >> > * updates: ftp.sh.cvut.cz
>> > > > > > > >> > base
>> > > > > > > >>
>> > > > > > > >> | 3.6 kB 00:00:00
>> > > > > > > >> > centos-opstools-release
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > centos-ovirt-common-testing
>> > > > > > > >>
>> > > > > > > >> | 3.4 kB 00:00:00
>> > > > > > > >> > centos-ovirt44-testing
>> > > > > > > >>
>> > > > > > > >> | 3.4 kB 00:00:00
>> > > > > > > >> > centos-qemu-ev-release
>> > > > > > > >>
>> > > > > > > >> | 3.4 kB 00:00:00
>> > > > > > > >> > centos-sclo-rh
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > centos-sclo-rh-release
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > centos-sclo-sclo
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > epel-apache-maven
>> > > > > > > >>
>> > > > > > > >> | 3.3 kB 00:00:00
>> > > > > > > >> > extras
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-centos-gluster6
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-centos-opstools
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-centos-ovirt43
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-centos-qemu-ev
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-epel
>> > > > > > > >>
>> > > > > > > >> | 5.3 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-snapshot
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-snapshot-static
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-4.3-virtio-win-latest
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-master-centos-gluster6
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> >
ovirt-master-centos-opstools-testing
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > ovirt-master-epel
>> > > > > > > >>
>> > > > > > > >> | 5.3 kB 00:00:00
>> > > > > > > >> > ovirt-master-snapshot
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-master-snapshot-static
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirt-master-virtio-win-latest
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > ovirtwebui-ovirt-web-ui-master
>> > > > > > > >>
>> > > > > > > >> | 3.0 kB 00:00:00
>> > > > > > > >> > sac-gluster-ansible
>> > > > > > > >>
>> > > > > > > >> | 3.3 kB 00:00:00
>> > > > > > > >> > updates
>> > > > > > > >>
>> > > > > > > >> | 2.9 kB 00:00:00
>> > > > > > > >> > (1/32): base/7/x86_64/group_gz
>> > > > > > > >>
>> > > > > > > >> | 165 kB 00:00:00
>> > > > > > > >> > (2/32): base/7/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 6.0 MB 00:00:00
>> > > > > > > >> > (3/32):
centos-sclo-rh/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 4.2 MB 00:00:00
>> > > > > > > >> > (4/32):
centos-qemu-ev-release/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 9.3 kB 00:00:00
>> > > > > > > >> > (5/32):
centos-sclo-sclo/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 344 kB 00:00:00
>> > > > > > > >> > (6/32):
centos-ovirt44-testing/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 1.1 kB 00:00:01
>> > > > > > > >> > (7/32): extras/7/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 164 kB 00:00:00
>> > > > > > > >> > (8/32):
centos-opstools-release/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 429 kB 00:00:01
>> > > > > > > >> > (9/32):
centos-ovirt-common-testing/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 101 kB 00:00:01
>> > > > > > > >> > (10/32):
ovirt-4.3-centos-gluster6/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 116 kB 00:00:00
>> > > > > > > >> > (11/32):
ovirt-4.3-centos-qemu-ev/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 73 kB 00:00:00
>> > > > > > > >> > (12/32):
ovirt-4.3-epel/x86_64/group_gz
>> > > > > > > >>
>> > > > > > > >> | 90 kB 00:00:00
>> > > > > > > >> > (13/32):
epel-apache-maven/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 5.0 kB 00:00:01
>> > > > > > > >> > (14/32):
ovirt-4.3-epel/x86_64/updateinfo
>> > > > > > > >>
>> > > > > > > >> | 1.0 MB 00:00:00
>> > > > > > > >> > (15/32):
ovirt-4.3-centos-opstools/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 429 kB 00:00:00
>> > > > > > > >> > (16/32):
ovirt-4.3-centos-ovirt43/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 211 kB 00:00:00
>> > > > > > > >> > (17/32):
ovirt-4.3-snapshot-static/7/primary_db
>> > > > > > > >>
>> > > > > > > >> | 3.4 kB 00:00:00
>> > > > > > > >> > (18/32):
ovirt-4.3-snapshot/7/primary_db
>> > > > > > > >>
>> > > > > > > >> | 109 kB 00:00:00
>> > > > > > > >> > (19/32):
ovirt-master-centos-gluster6/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 116 kB 00:00:00
>> > > > > > > >> > (20/32):
ovirt-4.3-epel/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 6.7 MB 00:00:00
>> > > > > > > >> > (21/32):
ovirt-master-epel/x86_64/group_gz
>> > > > > > > >>
>> > > > > > > >> | 90 kB 00:00:00
>> > > > > > > >> > (22/32):
ovirt-master-epel/x86_64/updateinfo
>> > > > > > > >>
>> > > > > > > >> | 1.0 MB 00:00:00
>> > > > > > > >> > (23/32):
ovirt-master-snapshot/7/primary_db
>> > > > > > > >>
>> > > > > > > >> | 54 kB 00:00:00
>> > > > > > > >> > (24/32):
ovirt-4.3-virtio-win-latest/primary_db
>> > > > > > > >>
>> > > > > > > >> | 7.6 kB 00:00:01
>> > > > > > > >> > (25/32):
ovirt-master-snapshot-static/7/primary_db
>> > > > > > > >>
>> > > > > > > >> | 4.6 kB 00:00:00
>> > > > > > > >> > (26/32):
ovirt-master-epel/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 6.7 MB 00:00:00
>> > > > > > > >> > (27/32):
ovirt-master-virtio-win-latest/primary_db
>> > > > > > > >>
>> > > > > > > >> | 7.6 kB 00:00:00
>> > > > > > > >> > (28/32):
centos-sclo-rh-release/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 4.2 MB 00:00:03
>> > > > > > > >> > (29/32):
updates/7/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 6.7 MB 00:00:00
>> > > > > > > >> > (30/32):
>> > > ovirt-master-centos-opstools-testing/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 611 kB 00:00:01
>> > > > > > > >> > (31/32):
ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 2.3 kB 00:00:00
>> > > > > > > >> > (32/32):
sac-gluster-ansible/x86_64/primary_db
>> > > > > > > >>
>> > > > > > > >> | 13 kB 00:00:00
>> > > > > > > >> > No package
ansible-runner-service-dev available.
>> > > > > > > >> > Error: Nothing to do
>> > > > > > > >> >
>> > > > > > > >> >
>> > > > > > > >> > Fedor
>> > > > > > > >> >
>> > > > > > > >> > ----- Original Message -----
>> > > > > > > >> > From: "Sandro Bonazzola"
< sbonazzo(a)redhat.com >
>> > > > > > > >> > To: "Fedor Gavrilov" <
fgavrilo(a)redhat.com >
>> > > > > > > >> > Cc: "Eyal Shenitzky" <
eshenitz(a)redhat.com >, "devel" <
>> > > > > > devel(a)ovirt.org >
>> > > > > > > >> > Sent: Tuesday, March 10, 2020
5:56:53 PM
>> > > > > > > >> > Subject: Re: [ovirt-devel] Re:
what's up with
>> > > > > > > >> ansible-runner-service-dev package?
>> > > > > > > >> >
>> > > > > > > >> > Il giorno mar 10 mar 2020 alle ore
15:39 Fedor Gavrilov <
>> > > > > > > >> fgavrilo(a)redhat.com >
>> > > > > > > >> > ha scritto:
>> > > > > > > >> >
>> > > > > > > >> > > Thanks for the response, Eyal!
>> > > > > > > >> > >
>> > > > > > > >> > > I already had ovirt-master repo
installed, but updated
>> > > > > everything
>> > > > > > > >> just in
>> > > > > > > >> > > case.
>> > > > > > > >> > > I even tried both yum and dnf
(since yum on centos was
>> > > giving
>> > > > > me
>> > > > > > > lots
>> > > > > > > >> of
>> > > > > > > >> > > grief before and I learned
their behaviour differs,
>> > > especially
>> > > > > > when
>> > > > > > > it
>> > > > > > > >> > > comes to bugs) but none
works...
>> > > > > > > >> > >
>> > > > > > > >> > > >No package
ansible-runner-service-dev available.
>> > > > > > > >> > > >No match for argument:
ansible-runner-service-dev
>> > > > > > > >> > >
>> > > > > > > >> > > Fedor
>> > > > > > > >> > >
>> > > > > > > >> > >
>> > > > > > > >> > Looks like you're trying to
install
>> ovirt-master-snapshot on
>> > > el7.
>> > > > > > > >> > It won't work.
>> > > > > > > >> > Master is not supporting el7
anymore.
>> > > > > > > >> > You can use 4.3 snapshot rpm at :
>> > > > > > > >> >
>> > > > > >
>> > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
>> > > > > > > >> if
>> > > > > > > >> > you need to stay on el7.
>> > > > > > > >> >
>> > > > > > > >> >
>> > > > > > > >> > > ----- Original Message -----
>> > > > > > > >> > > From: "Eyal
Shenitzky" < eshenitz(a)redhat.com >
>> > > > > > > >> > > To: "Fedor Gavrilov"
< fgavrilo(a)redhat.com >
>> > > > > > > >> > > Cc: "devel" <
devel(a)ovirt.org >
>> > > > > > > >> > > Sent: Tuesday, March 10, 2020
2:24:16 PM
>> > > > > > > >> > > Subject: Re: [ovirt-devel]
what's up with
>> > > > > > ansible-runner-service-dev
>> > > > > > > >> > > package?
>> > > > > > > >> > >
>> > > > > > > >> > > Hi Fedor,
>> > > > > > > >> > >
>> > > > > > > >> > > Please try:
>> > > > > > > >> > > 1. dnf install
>> > > > > > > >> > >
>> > > > >
http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
>> > > > > > > >> > > 2. dnf update
>> > > > > > > >> > > 3. dnf install
ansible-runner-service-dev
>> > > > > > > >> > > 4. flow the instruction from
thread 'New dependency for
>> > > > > > development
>> > > > > > > >> > > environment'
>> > > > > > > >> > > The
>> > > > > > > >> > >
>> > > > > > > >> > > On Tue, 10 Mar 2020 at 14:55,
Fedor Gavrilov <
>> > > > > fgavrilo(a)redhat.com
>> > > > > > >
>> > > > > > > >> wrote:
>> > > > > > > >> > >
>> > > > > > > >> > > > Hi everyone,
>> > > > > > > >> > > >
>> > > > > > > >> > > > After I screwed up my dev
environment beyond repair I
>> > > have to
>> > > > > > set
>> > > > > > > >> it up
>> > > > > > > >> > > > again and I see something
I haven't last time
>> (CentOS 7):
>> > > > > > > >> > > >
>> > > > > > > >> > > > $ sudo yum install
ansible-runner-service-dev
>> > > > > > > >> > > > Loaded plugins:
fastestmirror
>> > > > > > > >> > > > Loading mirror speeds from
cached hostfile
>> > > > > > > >> > > > * base:
mirror.hosting90.cz
>> > > > > > > >> > > > * centos-sclo-rh:
mirror.hosting90.cz
>> > > > > > > >> > > > * centos-sclo-sclo:
mirror.hosting90.cz
>> > > > > > > >> > > > * extras:
mirror.hosting90.cz
>> > > > > > > >> > > > * ovirt-master-epel:
mirror.hosting90.cz
>> > > > > > > >> > > > * ovirt-master-snapshot:
ftp.nluug.nl
>> > > > > > > >> > > > *
ovirt-master-snapshot-static: ftp.nluug.nl
>> > > > > > > >> > > > * updates:
mirror.hosting90.cz
>> > > > > > > >> > > > No package
ansible-runner-service-dev available.
>> > > > > > > >> > > >
>> > > > > > > >> > > > Maybe something's
missing from my notes, but where
>> did it
>> > > go?
>> > > > > > > >> Should I
>> > > > > > > >> > > add
>> > > > > > > >> > > > some repo?
>> > > > > > > >> > > >
>> > > > > > > >> > > > Fedor
>> > > > > > > >> > > >
_______________________________________________
>> > > > > > > >> > > > Devel mailing list --
devel(a)ovirt.org
>> > > > > > > >> > > > To unsubscribe send an
email to
>> devel-leave(a)ovirt.org
>> > > > > > > >> > > > Privacy Statement:
>> > > https://www.ovirt.org/privacy-policy.html
>> > > > > > > >> > > > oVirt Code of Conduct:
>> > > > > > > >> > > >
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > >> > > > List Archives:
>> > > > > > > >> > > >
>> > > > > > > >> > >
>> > > > > > > >>
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3...
>> > > > > > > >> > > >
>> > > > > > > >> > >
>> > > > > > > >> > >
>> > > > > > > >> > > --
>> > > > > > > >> > > Regards,
>> > > > > > > >> > > Eyal Shenitzky
>> > > > > > > >> > >
_______________________________________________
>> > > > > > > >> > > Devel mailing list --
devel(a)ovirt.org
>> > > > > > > >> > > To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > >> > > Privacy Statement:
>> > > https://www.ovirt.org/privacy-policy.html
>> > > > > > > >> > > oVirt Code of Conduct:
>> > > > > > > >> > >
>> https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > >> > > List Archives:
>> > > > > > > >> > >
>> > > > > > > >>
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSV...
>> > > > > > > >> > >
>> > > > > > > >> >
>> > > > > > > >> >
>> > > > > > > >> > --
>> > > > > > > >> >
>> > > > > > > >> > Sandro Bonazzola
>> > > > > > > >> >
>> > > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA
R&D RHV
>> > > > > > > >> >
>> > > > > > > >> > Red Hat EMEA <
https://www.redhat.com/ >
>> > > > > > > >> >
>> > > > > > > >> > sbonazzo(a)redhat.com
>> > > > > > > >> > < https://www.redhat.com/
>*Red Hat respects your work
>> life
>> > > > > balance.
>> > > > > > > >> > Therefore there is no need to answer
this email out of
>> your
>> > > > > office
>> > > > > > > >> hours.
>> > > > > > > >> > <
https://mojo.redhat.com/docs/DOC-1199578 >*
>> > > > > > > >> >
_______________________________________________
>> > > > > > > >> > Devel mailing list --
devel(a)ovirt.org
>> > > > > > > >> > To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > >> > Privacy Statement:
>> https://www.ovirt.org/privacy-policy.html
>> > > > > > > >> > oVirt Code of Conduct:
>> > > > > > > >>
>> https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > >> > List Archives:
>> > > > > > > >>
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47AN...
>> > > > > > > >>
_______________________________________________
>> > > > > > > >> Devel mailing list -- devel(a)ovirt.org
>> > > > > > > >> To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > >> Privacy Statement:
>> https://www.ovirt.org/privacy-policy.html
>> > > > > > > >> oVirt Code of Conduct:
>> > > > > > > >>
>> https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > >> List Archives:
>> > > > > > > >>
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3...
>> > > > > > > >>
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > --
>> > > > > > > > Regards,
>> > > > > > > > Eyal Shenitzky
>> > > > > > > >
_______________________________________________
>> > > > > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > > Privacy Statement:
>> https://www.ovirt.org/privacy-policy.html
>> > > > > > > > oVirt Code of Conduct:
>> > > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > > List Archives:
>> > > > > > > >
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7AL...
>> > > > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > > --
>> > > > > > > Martin Perina
>> > > > > > > Manager, Software Engineering
>> > > > > > > Red Hat Czech s.r.o.
>> > > > > > > _______________________________________________
>> > > > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > > > To unsubscribe send an email to
devel-leave(a)ovirt.org
>> > > > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> > > > > > > oVirt Code of Conduct:
>> > > > > > >
https://www.ovirt.org/community/about/community-guidelines/
>> > > > > > > List Archives:
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ...
>> > > > > > >
>> > > > > > >
>> > > > > >
>> > > > > > --
>> > > > > > Martin Perina
>> > > > > > Manager, Software Engineering
>> > > > > > Red Hat Czech s.r.o.
>> > > > > >
>> > > > > >
>> > > > >
>> > > > > --
>> > > > > Martin Perina
>> > > > > Manager, Software Engineering
>> > > > > Red Hat Czech s.r.o.
>> > > > >
>> > > > >
>> > > > >
>> > > > > --
>> > > > > Martin Perina
>> > > > > Manager, Software Engineering
>> > > > > Red Hat Czech s.r.o.
>> > > > >
>> > > > > _______________________________________________
>> > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> > > > > oVirt Code of Conduct:
>> > > > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > > List Archives:
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN7...
>> > > > > _______________________________________________
>> > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> > > > > oVirt Code of Conduct:
>> > > > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > > List Archives:
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC...
>> > > > > _______________________________________________
>> > > > > Devel mailing list -- devel(a)ovirt.org
>> > > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> > > > > oVirt Code of Conduct:
>> > > > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > > List Archives:
>> > > > >
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZ...
>> > > > >
>> > > >
>> > > >
>> > > > _______________________________________________
>> > > > Devel mailing list -- devel(a)ovirt.org
>> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6F...
>> > > > _______________________________________________
>> > > > Devel mailing list -- devel(a)ovirt.org
>> > > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJ...
>> > > _______________________________________________
>> > > Devel mailing list -- devel(a)ovirt.org
>> > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF...
>> > >
>> > >
>> > > _______________________________________________
>> > > Devel mailing list -- devel(a)ovirt.org
>> > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7...
>> > > _______________________________________________
>> > > Devel mailing list -- devel(a)ovirt.org
>> > > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > > oVirt Code of Conduct:
>> > > https://www.ovirt.org/community/about/community-guidelines/
>> > > List Archives:
>> > >
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVC...
>> > >
>> >
>> >
>> > --
>> > Martin Perina
>> > Manager, Software Engineering
>> > Red Hat Czech s.r.o.
>> > _______________________________________________
>> > Devel mailing list -- devel(a)ovirt.org
>> > To unsubscribe send an email to devel-leave(a)ovirt.org
>> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> > oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> > List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ...
>> _______________________________________________
>> Devel mailing list -- devel(a)ovirt.org
>> To unsubscribe send an email to devel-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5...
>> _______________________________________________
>> Devel mailing list -- devel(a)ovirt.org
>> To unsubscribe send an email to devel-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJ...
>>
>
>
> --
> Regards,
> Eyal Shenitzky
>
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/2IIVS6MVVRZ...
1:58 p.m.
I remember this error from a while ago, do you have a recent nmstate
installed on the host?
9:57 p.m.
When I try to do that, I get
2020-04-01 12:14:49,346+02 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand]
(default task-6) [eaddc8ee-a015-4093-a488-64384362141b] Unexpected return
value: Status [code=-32603, message=Internal JSON-RPC error: {'reason':
"type object 'LinuxBridge' has no attribute 'STP'"}]
2020-04-01
12:14:49,346+02 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.HostSetupNetworksVDSCommand]
(default task-6) [eaddc8ee-a015-4093-a488-64384362141b] Failed in
'HostSetupNetworksVDS' method
in the logs. I wonder if something is wrong with my FC30 host setup then...
https://www.mail-archive.com/infra@ovirt.org/msg53048.html
1695
days inactive
1717
days old
39 comments
9 participants
participants (9)
-
Benny Zlotnik -
Eyal Shenitzky -
Fedor Gavrilov -
Liran Rotenberg -
Martin Perina -
Nir Soffer -
Prajith Kesava Prasad -
Sandro Bonazzola -
Vojtech Juranek