Hi, Whats up with the oVirt Dashboard? it has few problems:. You can see my Dashboard here: https://imgur.com/a/n4IWppe * the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2 * Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names). * The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB) Should I open bugs on all of them in 1 bugzilla? if so, on which product? Thanks, Hetz
It sounds like your dwh database is not updating. Can you check that? Greg On Fri, Jul 27, 2018 at 5:41 AM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi,
Whats up with the oVirt Dashboard? it has few problems:. You can see my Dashboard here: https://imgur.com/a/n4IWppe
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2 * Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names). * The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
Should I open bugs on all of them in 1 bugzilla? if so, on which product?
Thanks, Hetz _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/BZUKLSBOWZPMHY...
-- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
Care to share how to check? תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org> On Fri, Jul 27, 2018 at 2:08 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
It sounds like your dwh database is not updating. Can you check that?
Greg
On Fri, Jul 27, 2018 at 5:41 AM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi,
Whats up with the oVirt Dashboard? it has few problems:. You can see my Dashboard here: https://imgur.com/a/n4IWppe
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2 * Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names). * The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
Should I open bugs on all of them in 1 bugzilla? if so, on which product?
Thanks, Hetz _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community- guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/ message/BZUKLSBOWZPMHYU7XDDUX6LOZULMFNCG/
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
Hi Hetz, the Dashboard page is used to visualize data collected from two sources: - Engine DB - inventory data, rendered as "status cards" (or "cubes" as you call them) located at the top - Data Warehouse (DWH) DB - global utilization data, rendered as "utilization cards" (the "cubes" in the middle) and "heat maps" at the bottom with Engine server caching both types of data. By default, inventory data is refreshed every 60sec and the utilization data is refreshed every 5min.
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2
The Dashboard page doesn't refresh its data automatically (yet) but there's a refresh button & "Last Updated" label in the top left corner. As mentioned above, the top-most status cards should have their (cached) data updated every 60sec.
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
* The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
This is part of the utilization card, which means it takes its data from DWH. As Greg wrote, please check your DWH setup <https://www.ovirt.org/documentation/data-warehouse/Data_Warehouse_Guide/>. Are you running DWH on Engine machine or on a different machine? Regards, Vojtech On Fri, Jul 27, 2018 at 1:09 PM, Hetz Ben Hamo <hetz@hetz.biz> wrote:
Care to share how to check?
תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org>
On Fri, Jul 27, 2018 at 2:08 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
It sounds like your dwh database is not updating. Can you check that?
Greg
On Fri, Jul 27, 2018 at 5:41 AM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi,
Whats up with the oVirt Dashboard? it has few problems:. You can see my Dashboard here: https://imgur.com/a/n4IWppe
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2 * Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names). * The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
Should I open bugs on all of them in 1 bugzilla? if so, on which product?
Thanks, Hetz _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/communit y/about/community-guidelines/ List Archives: https://lists.ovirt.org/archiv es/list/devel@ovirt.org/message/BZUKLSBOWZPMHYU7XDDUX6LOZULMFNCG/
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community- guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/ message/TI5CCSL4NXTKHWNGRFNGPKEJWHO27OQ5/
Hi Vojtech,
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2
The Dashboard page doesn't refresh its data automatically (yet) but there's a refresh button & "Last Updated" label in the top left corner. As mentioned above, the top-most status cards should have their (cached) data updated every 60sec.
I used the refresh button, same result. It's updating when I'm powering and resuming another node, but the error and warning - not.
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
Is that on purpose? any setting that I can change to enable tracking?
* The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
This is part of the utilization card, which means it takes its data from DWH. As Greg wrote, please check your DWH setup <https://www.ovirt.org/documentation/data-warehouse/Data_Warehouse_Guide/>. Are you running DWH on Engine machine or on a different machine?
This is a default installation, so DWH is running on the HE VM.
Regards, Vojtech
On Fri, Jul 27, 2018 at 1:09 PM, Hetz Ben Hamo <hetz@hetz.biz> wrote:
Care to share how to check?
תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org>
On Fri, Jul 27, 2018 at 2:08 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
It sounds like your dwh database is not updating. Can you check that?
Greg
On Fri, Jul 27, 2018 at 5:41 AM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi,
Whats up with the oVirt Dashboard? it has few problems:. You can see my Dashboard here: https://imgur.com/a/n4IWppe
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2 * Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names). * The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
Should I open bugs on all of them in 1 bugzilla? if so, on which product?
Thanks, Hetz _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/communit y/about/community-guidelines/ List Archives: https://lists.ovirt.org/archiv es/list/devel@ovirt.org/message/BZUKLSBOWZPMHYU7XDDUX6LOZULMFNCG/
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/communit y/about/community-guidelines/ List Archives: https://lists.ovirt.org/archiv es/list/devel@ovirt.org/message/TI5CCSL4NXTKHWNGRFNGPKEJWHO27OQ5/
On Fri, Jul 27, 2018 at 12:07 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi Vojtech,
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2
The Dashboard page doesn't refresh its data automatically (yet) but there's a refresh button & "Last Updated" label in the top left corner. As mentioned above, the top-most status cards should have their (cached) data updated every 60sec.
I used the refresh button, same result. It's updating when I'm powering and resuming another node, but the error and warning - not.
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
Is that on purpose? any setting that I can change to enable tracking?
It is on purpose. Clusters don't have "up" or "down" like hosts or vms do. So the N/A is always there as a placeholder.
* The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
This is part of the utilization card, which means it takes its data from DWH. As Greg wrote, please check your DWH setup <https://www.ovirt.org/documentation/data-warehouse/Data_Warehouse_Guide/>. Are you running DWH on Engine machine or on a different machine?
This is a default installation, so DWH is running on the HE VM.
is the dwh service running? what does the dwh.log say? (Adding Shirly too, since I'm far from an expert on this)
Regards, Vojtech
On Fri, Jul 27, 2018 at 1:09 PM, Hetz Ben Hamo <hetz@hetz.biz> wrote:
Care to share how to check?
תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org>
On Fri, Jul 27, 2018 at 2:08 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
It sounds like your dwh database is not updating. Can you check that?
Greg
On Fri, Jul 27, 2018 at 5:41 AM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi,
Whats up with the oVirt Dashboard? it has few problems:. You can see my Dashboard here: https://imgur.com/a/n4IWppe
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2 * Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names). * The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
Should I open bugs on all of them in 1 bugzilla? if so, on which product?
Thanks, Hetz _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/BZUKLSBOWZPMHY...
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/TI5CCSL4NXTKHW...
-- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
Adding sradco. YANIV LAVI SENIOR TECHNICAL PRODUCT MANAGER Red Hat Israel Ltd. <https://www.redhat.com/> 34 Jerusalem Road, Building A, 1st floor Ra'anana, Israel 4350109 ylavi@redhat.com T: +972-9-7692306 <javascript:void(0);>/8272306 <javascript:void(0);> F: +972-9-7692223 <javascript:void(0);> IM: ylavi <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> @redhatnews <https://twitter.com/redhatnews> Red Hat <https://www.linkedin.com/company/red-hat> Red Hat <https://www.facebook.com/RedHatInc> On Sat, Jul 28, 2018 at 1:31 AM Greg Sheremeta <gshereme@redhat.com> wrote:
On Fri, Jul 27, 2018 at 12:07 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi Vojtech,
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2
The Dashboard page doesn't refresh its data automatically (yet) but there's a refresh button & "Last Updated" label in the top left corner. As mentioned above, the top-most status cards should have their (cached) data updated every 60sec.
I used the refresh button, same result. It's updating when I'm powering and resuming another node, but the error and warning - not.
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
Is that on purpose? any setting that I can change to enable tracking?
It is on purpose. Clusters don't have "up" or "down" like hosts or vms do. So the N/A is always there as a placeholder.
* The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
This is part of the utilization card, which means it takes its data from DWH. As Greg wrote, please check your DWH setup <https://www.ovirt.org/documentation/data-warehouse/Data_Warehouse_Guide/>. Are you running DWH on Engine machine or on a different machine?
This is a default installation, so DWH is running on the HE VM.
is the dwh service running? what does the dwh.log say? (Adding Shirly too, since I'm far from an expert on this)
Regards, Vojtech
On Fri, Jul 27, 2018 at 1:09 PM, Hetz Ben Hamo <hetz@hetz.biz> wrote:
Care to share how to check?
תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org>
On Fri, Jul 27, 2018 at 2:08 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
It sounds like your dwh database is not updating. Can you check that?
Greg
On Fri, Jul 27, 2018 at 5:41 AM Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi,
Whats up with the oVirt Dashboard? it has few problems:. You can see my Dashboard here: https://imgur.com/a/n4IWppe
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2 * Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names). * The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
Should I open bugs on all of them in 1 bugzilla? if so, on which product?
Thanks, Hetz _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/BZUKLSBOWZPMHY...
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/TI5CCSL4NXTKHW...
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig> _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GQ6Y5CK5TSWIN4...
On Fri, Jul 27, 2018 at 6:13 PM Vojtech Szocs <vszocs@redhat.com> wrote:
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
This looks bad, we need a better way. Nir
On Sun, Jul 29, 2018 at 11:37 AM Nir Soffer <nsoffer@redhat.com> wrote:
On Fri, Jul 27, 2018 at 6:13 PM Vojtech Szocs <vszocs@redhat.com> wrote:
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
This looks bad, we need a better way.
I'll bring it up with UXD [cc'd them]. -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
On Sun, Jul 29, 2018 at 11:36 AM, Nir Soffer <nsoffer@redhat.com> wrote:
On Fri, Jul 27, 2018 at 6:13 PM Vojtech Szocs <vszocs@redhat.com> wrote:
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
This looks bad, we need a better way.
Agreed. This came from not having anything to "roll up" about Clusters, but we can do a better job making this clear rather than making it seem broken with "N/A". Does anyone have any suggestions on something that would be helpful to see about the clusters at this level? Thanks, Liz
Nir
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community- guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/ message/J4KSJHJSVIZ76B54UVYR3SDPZUTNK57G/
On Tue, Jul 31, 2018 at 5:47 AM Liz Blanchard <lsurette@redhat.com> wrote:
On Sun, Jul 29, 2018 at 11:36 AM, Nir Soffer <nsoffer@redhat.com> wrote:
On Fri, Jul 27, 2018 at 6:13 PM Vojtech Szocs <vszocs@redhat.com> wrote:
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
This looks bad, we need a better way.
Agreed. This came from not having anything to "roll up" about Clusters, but we can do a better job making this clear rather than making it seem broken with "N/A". Does anyone have any suggestions on something that would be helpful to see about the clusters at this level?
Nothing comes to mind for me :) @Tomas Jelinek <tjelinek@redhat.com> @Michal Skrivanek <mskrivan@redhat.com> any thoughts?
Thanks, Liz
Nir
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J4KSJHJSVIZ76B...
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/U6QTGXKC5R6C5R...
-- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
On Tue, Jul 31, 2018 at 4:43 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
On Tue, Jul 31, 2018 at 5:47 AM Liz Blanchard <lsurette@redhat.com> wrote:
On Sun, Jul 29, 2018 at 11:36 AM, Nir Soffer <nsoffer@redhat.com> wrote:
On Fri, Jul 27, 2018 at 6:13 PM Vojtech Szocs <vszocs@redhat.com> wrote:
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
This looks bad, we need a better way.
Agreed. This came from not having anything to "roll up" about Clusters, but we can do a better job making this clear rather than making it seem broken with "N/A". Does anyone have any suggestions on something that would be helpful to see about the clusters at this level?
Nothing comes to mind for me :) @Tomas Jelinek <tjelinek@redhat.com> @Michal Skrivanek <mskrivan@redhat.com> any thoughts?
from the top of my head, it could be a joint query: status up: -The Data Center of the cluster is up (storage/SPM are ok) and there is at least one host in the cluster in an up state (cluster can run VMs) status down: -everything else or we can break it a bit more if needed: status maintenance: -DC is up, all hosts are in maintenance or no hosts configured on the cluster status contending: -SPM election is in progress
Thanks, Liz
Nir
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community- guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/ message/J4KSJHJSVIZ76B54UVYR3SDPZUTNK57G/
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community- guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/ message/U6QTGXKC5R6C5RTSH34BO6LN5B6BADGU/
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community- guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/ message/24H655OSCAHC5F2DBLWFZZ5GJR2MEMKU/
YANIV LAVI SENIOR TECHNICAL PRODUCT MANAGER Red Hat Israel Ltd. <https://www.redhat.com/> 34 Jerusalem Road, Building A, 1st floor Ra'anana, Israel 4350109 ylavi@redhat.com T: +972-9-7692306 <javascript:void(0);>/8272306 <javascript:void(0);> F: +972-9-7692223 <javascript:void(0);> IM: ylavi <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> @redhatnews <https://twitter.com/redhatnews> Red Hat <https://www.linkedin.com/company/red-hat> Red Hat <https://www.facebook.com/RedHatInc> On Tue, Jul 31, 2018 at 5:14 PM Moran Goldboim <mgoldboi@redhat.com> wrote:
On Tue, Jul 31, 2018 at 4:43 PM, Greg Sheremeta <gshereme@redhat.com> wrote:
On Tue, Jul 31, 2018 at 5:47 AM Liz Blanchard <lsurette@redhat.com> wrote:
On Sun, Jul 29, 2018 at 11:36 AM, Nir Soffer <nsoffer@redhat.com> wrote:
On Fri, Jul 27, 2018 at 6:13 PM Vojtech Szocs <vszocs@redhat.com> wrote:
* Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names).
The "N/A" text shown in Cluster status card simply means that we aren't tracking status (up/down/etc.) for the Cluster object within the Dashboard.
This looks bad, we need a better way.
Agreed. This came from not having anything to "roll up" about Clusters, but we can do a better job making this clear rather than making it seem broken with "N/A". Does anyone have any suggestions on something that would be helpful to see about the clusters at this level?
Nothing comes to mind for me :) @Tomas Jelinek <tjelinek@redhat.com> @Michal Skrivanek <mskrivan@redhat.com> any thoughts?
from the top of my head, it could be a joint query: status up: -The Data Center of the cluster is up (storage/SPM are ok) and there is at least one host in the cluster in an up state (cluster can run VMs)
status down: -everything else
or we can break it a bit more if needed: status maintenance: -DC is up, all hosts are in maintenance or no hosts configured on the cluster
status contending: -SPM election is in progress
I would just not show anything. We should not add a status if one doesn't exists. If we want to add cluster status it should first happen in the manager.
Thanks, Liz
Nir
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J4KSJHJSVIZ76B...
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/U6QTGXKC5R6C5R...
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
gshereme@redhat.com IRC: gshereme <https://red.ht/sig>
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/24H655OSCAHC5F...
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/MMDKTJRWF5JKOG...
-- SHIRLY RADCO BI SENIOR SOFTWARE ENGINEER Red Hat Israel <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> On Fri, Jul 27, 2018 at 12:40 PM, Hetz Ben Hamo <hetz@hetz.biz> wrote:
Hi,
Whats up with the oVirt Dashboard? it has few problems:. You can see my Dashboard here: https://imgur.com/a/n4IWppe
* the errors/warning cube doesn't update so much even after cleaning and waiting an hour or 2 * Cluster cube shows "1 cluster" but also "N/A" even when my cluster is up with 2 machines (with DNS names). * The memory calculation is wrong - it still shows 503.5 GB even if 1 node is down for maintenance (which means I need to see something like 220GB)
Some on the data is from engine db, which means its what is happening now - The first row. There is caching so it may take a few minutes to refresh or by manual refresh. Other widgets are based on the aggregated data stored in ovirt_engine_history db (DWH). The DWH widgets are based on the last 24 hours of hourly aggregates. The over time chart under the pie chart should show you the average consumption over time. Please let me know or open a bug if you think there is an issue with the current behavior. By clicking on the widgets you can also get a breakdown for hosts and vms. Best, Shirly
Should I open bugs on all of them in 1 bugzilla? if so, on which product?
Thanks, Hetz
_______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community- guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/ message/BZUKLSBOWZPMHYU7XDDUX6LOZULMFNCG/
participants (8)
-
Greg Sheremeta -
Hetz Ben Hamo -
Liz Blanchard -
Moran Goldboim -
Nir Soffer -
Shirly Radco -
Vojtech Szocs -
Yaniv Lavi