On Friday, 17 September 2021 07:09:28 CEST Ales Musil wrote:

On Thu, Sep 16, 2021 at 4:53 PM Vojtech Juranek <vjuranek@redhat.com> wrote:

...

Hi, I'm trying to install engine build [1] to verify test a patch [2], but I'm getting following error:

[root@localhost ~]# dnf install ovirt-engine Last metadata expiration check: 0:20:02 ago on Thu Sep 16 10:24:54 2021. Package ovirt-engine-4.4.9.1-0.0.master.20210915185633.git016f27be31a.el8.noarch is already installed.

Error: Problem: package

ovirt-engine-setup-4.5.0-0.0.master.20210916115243.gitf26fbb5598f.el8.noar ch requires ovirt-engine-setup-plugin-ovirt-engine = 4.5.0-0.0.master.20210916115243.gitf26fbb5598f.el8, but none of the providers can be installed

- package

ovirt-engine-4.5.0-0.0.master.20210916115243.gitf26fbb5598f.el8.noarch requires ovirt-engine-setup >= 4.5.0-0.0.master.20210916115243.gitf26fbb5598f.el8, but none of the providers can be installed

- package

ovirt-engine-setup-plugin-ovirt-engine-4.5.0-0.0.master.20210916115243.git f26fbb5598f.el8.noarch requires ovirt-openvswitch-ovn-central >= 2.15, but none of the providers can be installed

- cannot install the best candidate for the job - nothing provides ovn-2021-central needed by

ovirt-openvswitch-ovn-central-2.15-1.el8.noarch

ovirt-engine-setup-plugin-ovirt-engine doesn't seem to be built and ovn-2021-central seems to be available only for centos stream 9 (on the other hand, oVirt packaged are not build for centos stream 9 AFAICT).

Any ideas how to solve it and install latest engine build?

Thanks Vojta

[1] https://jenkins.ovirt.org/job/ovirt-engine_standard-check-patch/14243/arti fact/check-patch.el8stream.x86_64/ [2] https://gerrit.ovirt.org/c/ovirt-engine/+/116747 _______________________________________________ Devel mailing list -- devel@ovirt.org To unsubscribe send an email to devel-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GZ3CPN6VVZ7T RMJ3KTNM3AXGGCS4UPS4/ Hi,

ovn-2021-central is also available on CentOS Stream 8 [0].

thanks, somehow I missed it

I guess you are trying to install an engine on Centos 8.4?

It's Centos 8.4 which I switched to Centos Stream. Looks like some issue with switching ovirt dependencies repo. Adding this repo manually works.

That won't work as oVirt master for now requires CentOS stream.

Regards, Ales

[0] http://mirror.centos.org/centos/8-stream/nfv/x86_64/openvswitch-2/Packages/o /

On Tue, Sep 21, 2021 at 10:06 AM Vojtech Juranek <vjuranek@redhat.com> wrote:

Hi,

...

I'm trying to install engine build [1] to verify test a patch [2], but I'm getting following error:

I was bale to install the engine, but adding new hosts fails with

2021-09-21 03:52:15 EDT - TASK [ovirt-provider-ovn-driver : Configure OVN for oVirt] ********************* 2021-09-21 03:52:15 EDT - 2021-09-21 03:52:15 EDT - fatal: [192.168.122.201]: FAILED! => {"changed": true, "cmd": ["vdsm-tool", "ovn-config", "192.168.122.192", "192.168.122.201", "192.168.122.201"], "delta": "0:00:00.355651", "end": "2021-09-21 03:52:13.433094", "msg": "non-zer o return code", "rc": 1, "start": "2021-09-21 03:52:13.077443", "stderr": "usage: \n /usr/bin/vdsm-tool [options] ovn-config IP-central [tunneling-IP|tunneling-network]\n Configures the ovn-controller on the host.\n\n Parameters:\n IP-central - the IP of the engine (the host where OVN central is located)\n tunneling-IP - the local IP which is to be used for OVN tunneling\n tunneling-network - the vdsm network meant to be used for OVN tunneling\n ", "stderr_lines": ["usage: ", " /usr/ bin/vdsm-tool [options] ovn-config IP-central [tunneling-IP|tunneling-network]", " Configures the ovn-controller on the host.", "", " Parameters:", " IP-central - the IP of the engine (the host where OVN central is located)", " tunneling-IP - the local IP which is to be used for OVN tunneling", " tunneling-network - the vdsm network meant to be used for OVN tunneling", " "], "stdout": "", "stdout_lines": []}

There's additional 192.168.122.201 and the command should be

vdsm-tool ovn-config 192.168.122.192 192.168.122.201

I can run it manually, but the network is not configured properly as the host setup fails always at this point. Again some issue on my side or is this a known issue? Is there any workaround for it?

Thanks for hits. Vojta

This looks like you have an older ovirt-provider-ovn-driver, that does not support the third argument of ovn-config. Try to upgrade the driver package. Regards, Ales -- Ales Musil Software Engineer - RHV Network Red Hat EMEA <https://www.redhat.com> amusil@redhat.com IM: amusil <https://red.ht/sig>

On 21. 9. 2021, at 11:56, Vojtech Juranek <vjuranek@redhat.com> wrote:

On Tuesday, 21 September 2021 10:40:56 CEST Ales Musil wrote:

...

On Tue, Sep 21, 2021 at 10:06 AM Vojtech Juranek <vjuranek@redhat.com>

wrote:

...

Hi,

...

I'm trying to install engine build [1] to verify test a patch [2], but

I'm

...

getting following error: I was bale to install the engine, but adding new hosts fails with

2021-09-21 03:52:15 EDT - TASK [ovirt-provider-ovn-driver : Configure OVN for oVirt] ********************* 2021-09-21 03:52:15 EDT - 2021-09-21 03:52:15 EDT - fatal: [192.168.122.201]: FAILED! => {"changed": true, "cmd": ["vdsm-tool", "ovn-config", "192.168.122.192", "192.168.122.201", "192.168.122.201"], "delta": "0:00:00.355651", "end": "2021-09-21 03:52:13.433094", "msg": "non-zer o return code", "rc": 1, "start": "2021-09-21 03:52:13.077443", "stderr": "usage: \n /usr/bin/vdsm-tool [options] ovn-config IP-central [tunneling-IP|tunneling-network]\n Configures the ovn-controller on the host.\n\n Parameters:\n IP-central -

the IP of the engine (the host where OVN central is located)\n

tunneling-IP - the local IP which is to be used for OVN tunneling\n tunneling-network - the vdsm network meant to be used for OVN tunneling\n

", "stderr_lines": ["usage: ", " /usr/

bin/vdsm-tool [options] ovn-config IP-central [tunneling-IP|tunneling-network]", " Configures the ovn-controller on the host.", "", " Parameters:", " IP-central - the IP of the engine (the host where OVN central is located)", " tunneling-IP - the local IP which is to be used for OVN tunneling", " tunneling-network - the vdsm network meant to be used for OVN tunneling", " "], "stdout": "", "stdout_lines": []}

There's additional 192.168.122.201 and the command should be

vdsm-tool ovn-config 192.168.122.192 192.168.122.201

I can run it manually, but the network is not configured properly as the host setup fails always at this point. Again some issue on my side or is this a known issue? Is there any workaround for it?

Thanks for hits. Vojta

This looks like you have an older ovirt-provider-ovn-driver, that does not support the third argument of ovn-config. Try to upgrade the driver package.

thanks, but ovirt-provider-ovn-driver seems to be up-to-date:

[root@localhost ~]# rpm -qa|grep ovirt-provider-ovn-driver ovirt-provider-ovn-driver-1.2.35-0.20210902122827.git6140625.el8.noarch

you’re supposed to use https://resources.ovirt.org/repos/ovirt/tested/master/rpm/el8/noarch/ update from there

it seems to be an issue in vdsm-tool, running it manually fails:

[root@localhost ~]# vdsm-tool ovn-config 192.168.122.192 192.168.122.201 192.168.122.201 usage: /usr/bin/vdsm-tool [options] ovn-config IP-central [tunneling-IP|tunneling-network] Configures the ovn-controller on the host.

Parameters: IP-central - the IP of the engine (the host where OVN central is located) tunneling-IP - the local IP which is to be used for OVN tunneling tunneling-network - the vdsm network meant to be used for OVN tunneling

[root@localhost ~]# echo $? 1

_______________________________________________ Devel mailing list -- devel@ovirt.org <mailto:devel@ovirt.org> To unsubscribe send an email to devel-leave@ovirt.org <mailto:devel-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html <https://www.ovirt.org/privacy-policy.html> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ <https://www.ovirt.org/community/about/community-guidelines/> List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/UYQZRKPZ7Y452U... <https://lists.ovirt.org/archives/list/devel@ovirt.org/message/UYQZRKPZ7Y452USEU5WNOXZSAZXG6VSL/>