oVirt Node - master - CentOS Stream 9 based ISO available for testing
Hi, I'm still working on it but I have a first ISO ready for giving a first run at https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-... Known limitations: - No hosted engine setup available - No ansible available - No collectd support - No cinderlib support Everything else should be there but it's totally untested. Help giving it a try and providing feedback is appreciated. Thanks -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*
On Thu, Sep 16, 2021 at 5:35 PM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Hi, I'm still working on it but I have a first ISO ready for giving a first run at
https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-...
Known limitations: - No hosted engine setup available
Nice! If SHE not available, what would be the procedure to install the standalone engine before deploying the host? Or could I try to deploy the node using a 4.4.8 standalone engine in its own DC/Cluster? Gianluca
Il giorno gio 16 set 2021 alle ore 18:06 Gianluca Cecchi < gianluca.cecchi@gmail.com> ha scritto:
On Thu, Sep 16, 2021 at 5:35 PM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Hi, I'm still working on it but I have a first ISO ready for giving a first run at
https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-...
Known limitations: - No hosted engine setup available
Nice! If SHE not available, what would be the procedure to install the standalone engine before deploying the host? Or could I try to deploy the node using a 4.4.8 standalone engine in its own DC/Cluster?
You can give it a run with a 4.4.8 standalone engine in its own DC/Cluster as a start. Or you can deploy a new engine as in the 4.4.8 flow but using https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm for providing the repositories Please note also these cases have never been tested yet.
Gianluca
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
Sounds like we hit https://bugzilla.redhat.com/show_bug.cgi?id=2002640 , so it may be more complicated than expected to get the host up. Il giorno gio 16 set 2021 alle ore 18:14 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Il giorno gio 16 set 2021 alle ore 18:06 Gianluca Cecchi < gianluca.cecchi@gmail.com> ha scritto:
On Thu, Sep 16, 2021 at 5:35 PM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Hi, I'm still working on it but I have a first ISO ready for giving a first run at
https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-...
Known limitations: - No hosted engine setup available
Nice! If SHE not available, what would be the procedure to install the standalone engine before deploying the host? Or could I try to deploy the node using a 4.4.8 standalone engine in its own DC/Cluster?
You can give it a run with a 4.4.8 standalone engine in its own DC/Cluster as a start. Or you can deploy a new engine as in the 4.4.8 flow but using https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm for providing the repositories Please note also these cases have never been tested yet.
Gianluca
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
lvchange -a y /dev/mapper/onn-home and eventually activating also remaining maps (grep mapper /etc/fstab to see them) and then exit from the rescue shell leads to a node up and running for me. Il giorno gio 16 set 2021 alle ore 18:34 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Sounds like we hit https://bugzilla.redhat.com/show_bug.cgi?id=2002640 , so it may be more complicated than expected to get the host up.
Il giorno gio 16 set 2021 alle ore 18:14 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Il giorno gio 16 set 2021 alle ore 18:06 Gianluca Cecchi < gianluca.cecchi@gmail.com> ha scritto:
On Thu, Sep 16, 2021 at 5:35 PM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Hi, I'm still working on it but I have a first ISO ready for giving a first run at
https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-...
Known limitations: - No hosted engine setup available
Nice! If SHE not available, what would be the procedure to install the standalone engine before deploying the host? Or could I try to deploy the node using a 4.4.8 standalone engine in its own DC/Cluster?
You can give it a run with a 4.4.8 standalone engine in its own DC/Cluster as a start. Or you can deploy a new engine as in the 4.4.8 flow but using https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm for providing the repositories Please note also these cases have never been tested yet.
Gianluca
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
*ovirt-node-ng-installer-4.5.0-**2021091610.el9.iso Sanity Testing - Failed* *Test scenarios:* - 1. ISO check - *PASS* - 2. GUI Install oVirt-node 4.5 - *Failed* (Met bug *Bug 2002640* <https://bugzilla.redhat.com/show_bug.cgi?id=2002640> - No way to have CentOS Stream 9 booting on installed system with /home on md device ) - Workaround: - lvchange -a y /dev/mapper/onn-home - and eventually activating also remaining maps (grep mapper /etc/fstab to see them) - exit from the rescue shell - 3. Install oVirt-node 4.5 on HP UEFI machine - *Failed* (Probably due to the kernel not signed, see attachment "UEFI-Failed") - 4. Cockpit UI Sanity Test - *Pass* - 5. Upgrade Testing - *Not Cover* (known limitations) - 6. Engine & Hosted Engine - *Not Cover* (known limitations) On Fri, Sep 17, 2021 at 12:45 AM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
lvchange -a y /dev/mapper/onn-home
and eventually activating also remaining maps (grep mapper /etc/fstab to see them)
and then exit from the rescue shell leads to a node up and running for me.
Il giorno gio 16 set 2021 alle ore 18:34 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Sounds like we hit https://bugzilla.redhat.com/show_bug.cgi?id=2002640 , so it may be more complicated than expected to get the host up.
Il giorno gio 16 set 2021 alle ore 18:14 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Il giorno gio 16 set 2021 alle ore 18:06 Gianluca Cecchi < gianluca.cecchi@gmail.com> ha scritto:
On Thu, Sep 16, 2021 at 5:35 PM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Hi, I'm still working on it but I have a first ISO ready for giving a first run at
https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-...
Known limitations: - No hosted engine setup available
Nice! If SHE not available, what would be the procedure to install the standalone engine before deploying the host? Or could I try to deploy the node using a 4.4.8 standalone engine in its own DC/Cluster?
You can give it a run with a 4.4.8 standalone engine in its own DC/Cluster as a start. Or you can deploy a new engine as in the 4.4.8 flow but using https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm for providing the repositories Please note also these cases have never been tested yet.
Gianluca
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UAHV33VCJN2YDX...
-- Thanks & Best regards, Chen
Il giorno ven 17 set 2021 alle ore 11:34 Chen Shao <cshao@redhat.com> ha scritto:
*ovirt-node-ng-installer-4.5.0-**2021091610.el9.iso Sanity Testing - Failed*
*Test scenarios:*
- 1. ISO check - *PASS* - 2. GUI Install oVirt-node 4.5 - *Failed* (Met bug *Bug 2002640* <https://bugzilla.redhat.com/show_bug.cgi?id=2002640> - No way to have CentOS Stream 9 booting on installed system with /home on md device ) - Workaround: - lvchange -a y /dev/mapper/onn-home - and eventually activating also remaining maps (grep mapper /etc/fstab to see them) - exit from the rescue shell - 3. Install oVirt-node 4.5 on HP UEFI machine - *Failed* (Probably due to the kernel not signed, see attachment "UEFI-Failed") - 4. Cockpit UI Sanity Test - *Pass* - 5. Upgrade Testing - *Not Cover* (known limitations) - 6. Engine & Hosted Engine - *Not Cover* (known limitations)
Thanks Chen! A few updates on my side: attaching host to engine failed in 2 different places: - wrong repositories for oVirt Node optional packages (solved now via https://gerrit.ovirt.org/c/ovirt-release/+/116760 ) - failing to setup network, reported here: https://bugzilla.redhat.com/show_bug.cgi?id=2005213 - vdsm is built with /usr/bin/python as interpreter, not sure why, still digging into it. Workaround: `ln -s /usr/bin/python3 /usr/bin/python` but this may be due to the custom vdsm build.
On Fri, Sep 17, 2021 at 12:45 AM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
lvchange -a y /dev/mapper/onn-home
and eventually activating also remaining maps (grep mapper /etc/fstab to see them)
and then exit from the rescue shell leads to a node up and running for me.
Il giorno gio 16 set 2021 alle ore 18:34 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Sounds like we hit https://bugzilla.redhat.com/show_bug.cgi?id=2002640 , so it may be more complicated than expected to get the host up.
Il giorno gio 16 set 2021 alle ore 18:14 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Il giorno gio 16 set 2021 alle ore 18:06 Gianluca Cecchi < gianluca.cecchi@gmail.com> ha scritto:
On Thu, Sep 16, 2021 at 5:35 PM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Hi, I'm still working on it but I have a first ISO ready for giving a first run at
https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-...
Known limitations: - No hosted engine setup available
Nice! If SHE not available, what would be the procedure to install the standalone engine before deploying the host? Or could I try to deploy the node using a 4.4.8 standalone engine in its own DC/Cluster?
You can give it a run with a 4.4.8 standalone engine in its own DC/Cluster as a start. Or you can deploy a new engine as in the 4.4.8 flow but using https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm for providing the repositories Please note also these cases have never been tested yet.
Gianluca
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UAHV33VCJN2YDX...
-- Thanks & Best regards, Chen
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
Il giorno ven 17 set 2021 alle ore 12:02 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Il giorno ven 17 set 2021 alle ore 11:34 Chen Shao <cshao@redhat.com> ha scritto:
*ovirt-node-ng-installer-4.5.0-**2021091610.el9.iso Sanity Testing - Failed*
*Test scenarios:*
- 1. ISO check - *PASS* - 2. GUI Install oVirt-node 4.5 - *Failed* (Met bug *Bug 2002640* <https://bugzilla.redhat.com/show_bug.cgi?id=2002640> - No way to have CentOS Stream 9 booting on installed system with /home on md device ) - Workaround: - lvchange -a y /dev/mapper/onn-home - and eventually activating also remaining maps (grep mapper /etc/fstab to see them) - exit from the rescue shell - 3. Install oVirt-node 4.5 on HP UEFI machine - *Failed* (Probably due to the kernel not signed, see attachment "UEFI-Failed") - 4. Cockpit UI Sanity Test - *Pass* - 5. Upgrade Testing - *Not Cover* (known limitations) - 6. Engine & Hosted Engine - *Not Cover* (known limitations)
Thanks Chen!
A few updates on my side: attaching host to engine failed in 2 different places: - wrong repositories for oVirt Node optional packages (solved now via https://gerrit.ovirt.org/c/ovirt-release/+/116760 ) - failing to setup network, reported here: https://bugzilla.redhat.com/show_bug.cgi?id=2005213
Thanks to Ales' workaround node is up and active in the engine. There is some work to be done on CentOS Stream 9 side but looks like we can start soon working on the engine side for supporting the CentOS Stream 9 nodes properly.
- vdsm is built with /usr/bin/python as interpreter, not sure why, still digging into it. Workaround: `ln -s /usr/bin/python3 /usr/bin/python` but this may be due to the custom vdsm build.
On Fri, Sep 17, 2021 at 12:45 AM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
lvchange -a y /dev/mapper/onn-home
and eventually activating also remaining maps (grep mapper /etc/fstab to see them)
and then exit from the rescue shell leads to a node up and running for me.
Il giorno gio 16 set 2021 alle ore 18:34 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Sounds like we hit https://bugzilla.redhat.com/show_bug.cgi?id=2002640 , so it may be more complicated than expected to get the host up.
Il giorno gio 16 set 2021 alle ore 18:14 Sandro Bonazzola < sbonazzo@redhat.com> ha scritto:
Il giorno gio 16 set 2021 alle ore 18:06 Gianluca Cecchi < gianluca.cecchi@gmail.com> ha scritto:
On Thu, Sep 16, 2021 at 5:35 PM Sandro Bonazzola <sbonazzo@redhat.com> wrote:
> Hi, > I'm still working on it but I have a first ISO ready for giving a > first run at > > https://resources.ovirt.org/pub/ovirt-master-snapshot-static/iso/ovirt-node-... > > Known limitations: > - No hosted engine setup available > > Nice! If SHE not available, what would be the procedure to install the standalone engine before deploying the host? Or could I try to deploy the node using a 4.4.8 standalone engine in its own DC/Cluster?
You can give it a run with a 4.4.8 standalone engine in its own DC/Cluster as a start. Or you can deploy a new engine as in the 4.4.8 flow but using https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm for providing the repositories Please note also these cases have never been tested yet.
Gianluca
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UAHV33VCJN2YDX...
-- Thanks & Best regards, Chen
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
participants (3)
-
Chen Shao -
Gianluca Cecchi -
Sandro Bonazzola