1:34 a.m.
Well... not yet.Check if the engine detects the volumes and verify again that all
glustereventsd work.
I would even consider restarting the engine, just to be on the safe side.
What is your oVirt version ? Maybe an update could solve your problem.
Best Regards,Strahil Nikolov
On Wed, Jul 13, 2022 at 17:05, Jiří Sléžka<jiri.slezka(a)slu.cz> wrote: On 7/13/22
14:53, Jiří Sléžka wrote:
On 7/12/22 22:28, Strahil Nikolov wrote:
> glustereventad will notify the engine when something changes - like a
> new volume is created from the cli (or bad things happened ;) ), so it
> should be running. >
> You can use the workaround from the github issue and reatart the
> glustereventsd service.
ok, workaround applied, glustereventsd service enabled and started on
all hosts.
I can see this log entry in volume Events
Detected change in status of brick
10.0.4.11:/gluster_bricks/engine/engine of volume engine of cluster
McHosting from UNKNOWN to UP via gluster event.
but Bricks tab shows still two (.12 and .13) of three bricks in Unknown
state. From command line point of view all bricks are up and healthy.
it looks like engine thinks that gluster service is disabled in cluster
but I cannot enable it because checkbox is disabled. In my other (FC
based) oVirt instance Gluster Service checkbox is not selected but not
disabled. So I am interested what could make that checkbox inactive...
well, on db side it looks like cluster has gluster_service disabled...
engine=# select virt_service, gluster_service from cluster;
virt_service | gluster_service
--------------+-----------------
t | f
(1 row)
still don't know why the checkbox is disabled. Would it be safe to
enabled gluster_service directly in db? I suppose no... :-)
Cheers,
Jiri
> For the vdsm, you can always run
> '/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start' which is executed
> by the vdsmd.service before every start (ExecStartPre stanza) and see
> if it complains about something.
[root@ovirt-hci03 ~]# /usr/libexec/vdsm/vdsmd_init_common.sh --pre-start
vdsm: Running mkdirs
vdsm: Running configure_vdsm_logs
vdsm: Running run_init_hooks
vdsm: Running check_is_configured
sanlock is configured for vdsm
lvm is configured for vdsm
abrt is already configured for vdsm
Managed volume database is already configured
Current revision of multipath.conf detected, preserving
libvirt is already configured for vdsm
vdsm: Running validate_configuration
SUCCESS: ssl configured to true. No conflicts
vdsm: Running prepare_transient_repository
vdsm: Running syslog_available
vdsm: Running nwfilter
vdsm: Running dummybr
vdsm: Running tune_system
vdsm: Running test_space
vdsm: Running test_lo
retcode 0, all looks ok...
Cheers,
Jiri
>
>
> Best Regards,
> Strahil Nikolov
>
> On Tue, Jul 12, 2022 at 11:12, Jiří Sléžka
> <jiri.slezka(a)slu.cz> wrote:
> On 7/11/22 16:22, Jiří Sléžka wrote:
> > On 7/11/22 15:57, Strahil Nikolov wrote:
> >> Can you check for AVC denials and the error message like the
> described
> >> in
> >>
>
> https://github.com/gluster/glusterfs-selinux/issues/27#issue-1097225183
>
> <https://github.com/gluster/glusterfs-selinux/issues/27#issue-1097225183
> >?
> >
> > thanks for reply, there are two unrelated (qemu-kvm) avc denials
> logged
> > (related probably to sanlock recovery)
> >
> > also I cannot find glustereventsd in any related log... is it
> really
> > used by vdsm-gluster?
> >
> > this service runs on no hosts
> >
> > systemctl status glustereventsd
> > ● glustereventsd.service - Gluster Events Notifier
> > Loaded: loaded
> (/usr/lib/systemd/system/glustereventsd.service;
> > disabled; vendor preset: disabled)
> > Active: inactive (dead)
>
> it looks like root of the problem is that Gluster service is
> disabled in
> cluster settings and cannot be enabled. But it was enabled before...
> also I have to manually install vdsm-gluster when I (re)install new
> host, but bricks from this host are in unknown state in admin. Maybe
> vdsm-gluster is not correctly configured? Maybe glustereventsd is not
> running? I am just guessing...
>
> I have no access to other HCI installation so I cannot compare
> differences.
>
> I would be really happy if someone could tell me what circumstances
> could disable Gluster service checkbox in admin and how to enable it
> again...
>
> Cheers,
>
> Jiri
>
>
> >
> > Cheers,
> >
> > Jiri
> >
> >
> >>
> >>
> >> Best Regards,
> >> Strahil Nikolov
> >>
> >> On Mon, Jul 11, 2022 at 16:44, Jiří Sléžka
> >> <jiri.slezka(a)slu.cz <mailto:jiri.slezka@slu.cz>>
wrote:
> >> Hello,
> >>
> >> On 7/11/22 14:34, Strahil Nikolov wrote:
> >> > Can you check something on the host:
> >> > cat /etc/glusterfs/eventsconfig.json
> >>
> >> cat /etc/glusterfs/eventsconfig.json
> >> {
> >> "log-level": "INFO",
> >> "port": 24009,
> >> "disable-events-log": false
> >> }
> >>
> >>
> >> > semanage port -l | grep $(awk -F ':' '/port/
> {gsub(",","",$2);
> >> print
> >> > $2}' /etc/glusterfs/eventsconfig.json)
> >>
> >> semanage port -l | grep 24009
> >>
> >> returns empty set, it looks like this port is not labeled
> >>
> >> Cheers,
> >>
> >> Jiri
> >>
> >> >
> >> > Best Regards,
> >> > Strahil Nikolov
> >> > В понеделник, 11 юли 2022 г., 02:18:57 ч. Гринуич+3, Jiří
> Sléžka
> >> > <jiri.slezka(a)slu.cz <mailto:jiri.slezka@slu.cz>
> <mailto:jiri.slezka@slu.cz <mailto:jiri.slezka@slu.cz>>> написа:
> >> >
> >> >
> >> > Hi,
> >> >
> >> > I would like to change CPU Type in my oVirt 4.4.10 HCI
> cluster
> >> (based on
> >> > 3 glusterfs/virt hosts). When I try to I got this error
> >> >
> >> > Error while executing action: Cannot disable gluster
> service on
> >> the
> >> > cluster as it contains volumes.
> >> >
> >> > As I remember I had Gluster Service enabled on this
> cluster but
> >> now both
> >> > (Enable Virt Services and Enable Gluster Service)
> checkboxes are
> >> grayed
> >> > out and Gluster Service is unchecked.
> >> >
> >> > Also Storage / Volumes displays my volumes... well,
> displays one
> >> brick
> >> > on particular host in unknown state (? mark) which is new
> >> situation. As
> >> > I can see from command line all bricks are online, no
> healing in
> >> > progress, all looks good...
> >> >
> >> > I am not sure if the second issue is relevant to first
> one so main
> >> > question is how can I (re)enable gluster service in my
> cluster?
> >> >
> >> > Thanks in advance,
> >> >
> >> > Jiri
> >> > _______________________________________________
> >> > Users mailing list -- users(a)ovirt.org
> <mailto:users@ovirt.org> <mailto:users@ovirt.org
> <mailto:users@ovirt.org>>
> >> <mailto:users@ovirt.org <mailto:users@ovirt.org>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>
> >> > To unsubscribe send an email to users-leave(a)ovirt.org
> <mailto:users-leave@ovirt.org>
> >> <mailto:users-leave@ovirt.org
<mailto:users-leave@ovirt.org>>
> >>
> >> > <mailto:users-leave@ovirt.org
> <mailto:users-leave@ovirt.org> <mailto:users-leave@ovirt.org
> <mailto:users-leave@ovirt.org>>>
> >> > Privacy Statement:
> https://www.ovirt.org/privacy-policy.html
> <https://www.ovirt.org/privacy-policy.html>
> >> <https://www.ovirt.org/privacy-policy.html
> <https://www.ovirt.org/privacy-policy.html >>
> >> > <https://www.ovirt.org/privacy-policy.html
> <https://www.ovirt.org/privacy-policy.html>
> >> <https://www.ovirt.org/privacy-policy.html
> <https://www.ovirt.org/privacy-policy.html>>>
> >> > oVirt Code of Conduct:
> >> >
> https://www.ovirt.org/community/about/community-guidelines/
> <https://www.ovirt.org/community/about/community-guidelines/>
> >> <https://www.ovirt.org/community/about/community-guidelines/
> <https://www.ovirt.org/community/about/community-guidelines/ >>
> >> >
> <https://www.ovirt.org/community/about/community-guidelines/
> <https://www.ovirt.org/community/about/community-guidelines/>
> >> <https://www.ovirt.org/community/about/community-guidelines/
> <https://www.ovirt.org/community/about/community-guidelines/>>>
> >> > List Archives:
> >> >
> >>
> >>
>
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4NVCQ33ZSJ...
>
>
>
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4NVCQ33ZSJ...
>
> >
> >>
> >>
> >>
>
>
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4NVCQ33ZSJ...
>
>
>
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4NVCQ33ZSJ...
>
> >
> >>
> >> >
> >> >
> >>
> >>
>
>
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4NVCQ33ZSJ...
>
>
>
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4NVCQ33ZSJ...
>
> >
> >>
> >>
> >>
>
>
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4NVCQ33ZSJ...
>
>
>
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4NVCQ33ZSJ...
>
>
> >>
> >>
> >
> >
> > _______________________________________________
> > Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
> > To unsubscribe send an email to users-leave(a)ovirt.org
> <mailto:users-leave@ovirt.org>
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> <https://www.ovirt.org/privacy-policy.html>
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> <https://www.ovirt.org/community/about/community-guidelines/>
> > List Archives:
>
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KJZMKJCPGC2...
>
>
>
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/KJZMKJCPGC2...
>
>
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/YVDPYIPFHHF...