Re: [ovirt-users] Network Question

On 08/06/2014 06:36 AM, Punit Dambiwal wrote: Hi Sahina, But Ovirt panel doesn't allow me to add with FQDN...it just display the ip address of the hosts... [image: Inline image 1] Hi Punit, The above happens only when ip address of the host is given in the Address field of New host dialog box, i.e while adding hosts to ovirt. As sahina suggested, if you would have provided the FQDN in the address filed while adding hosts to ovirt, you should have seen FQDN's of the hosts being displayed in the Host field of 'Add Bricks' Dialog. In case you would have not provided FQDN of the host in the address filed while adding hosts, please remove the hosts and add it again by giving FQDN of the host in the address field in the New Host dialog box. Hope this helps :-) Thanks kasturi. On Tue, Aug 5, 2014 at 7:48 PM, Sahina Bose <sabose(a)redhat.com&gt; wrote: > > On 08/04/2014 09:06 AM, Punit Dambiwal wrote: > > Hi Sahina, > > But when i try to add the gluster Hosts from Ovirt....it doesn't display > the FQDN to add the bricks...it display the ip address only...i will try to > use the work around.... > > > When you add the gluster host to oVirt, you should have provided the > FQDN in the host address field. It uses this to display the list of hosts > from which you can add the bricks > > > > > Another question is what will be the drawbacks if i use ovirtmgmt and > storage on the same network (i will use 10GB network here with bonding) ?? > > > On Fri, Aug 1, 2014 at 6:14 PM, Sahina Bose <sabose(a)redhat.com&gt; wrote: > >> >> On 08/01/2014 02:51 PM, Dan Kenigsberg wrote: >> >>> On Fri, Aug 01, 2014 at 09:43:07AM +0800, Punit Dambiwal wrote: >>> >>>> Hi All, >>>> >>>> Is there any update on this ?? >>>> >>>> >>>> On Thu, Jul 31, 2014 at 9:08 AM, Punit Dambiwal <hypunit(a)gmail.com&gt; >>>> wrote: >>>> >>>> Hi Antoni, >>>>> >>>>> But all the bricks and gluster in the another subnet...I am using the >>>>> Compute and gluster storage combined on the same host.... >>>>> >>>>> Ovirtmgmt :- 43.25.76.0/24 >>>>> Gluster Storage :- 10.10.10.0/24 >>>>> >>>> Did you try to follow Sahina's advice? >>> >>> qemu-to-gluster communication goes on top the IP that you mount. >>> However, without hacks, inter-gluster communication uses FQDN of hosts, >>> which most commonly resolves to the management network. >>> >> >> >> From the output of your "gluster volume info" , it looks like you have >> used IP address (43.25...) to peer probe the hosts? If you add the host >> from oVirt, for gluster to be able to use separate network for >> glusterd-glusterd communication, you will need to use FQDN while adding the >> host, and workaround as mentioned in >> http://lists.ovirt.org/pipermail/users/2014-February/020894.html >> >> > > _______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users