Hi Vinicius, i'm sorry, I thought I had replied already.
I'm mostly using IPoIB, but gluster is using some over RDMA. I'm using it
a few different ways,
5 IB nodes, all have dual port ConnectX-3 cards @ 40GB
2 nodes are running windows, one port on each is used for a sync channel
for starwind Vsan to mirror ~20tb of date. The second ports are using for
iSCS sharing SMB fiile shares for other IB nodes.
3 nides are running CentOS 7 and ovirt. One of the ports on each are used
for gluster synchronzaton, gluster is set to use both IPoIB & RDMA. Then
the other ports are using for migratons, iSCSI sharing, and a backup admin
On Fri, Mar 1, 2019 at 1:36 PM Vinícius Ferrão <ferrao(a)versatushpc.com.br>
Darkytoo have you received my message.
I’m really curious about your setup using Infiniband.
> On 14 Feb 2019, at 07:42, Vinícius Ferrão <ferrao(a)versatushpc.com.br>
> Are you guys running IPoIB for Infiniband Storage? Is it true IB mode?
Or Ethernet over IB?
> If using NFS on top of it, RDMA is working
> with NFSoRDMA?
> I’m really curious about your setup.
> Sent from my iPhone
>> On 10 Feb 2019, at 23:55, darkytoo(a)gmail.com wrote:
>> You were just like me, I also thought it would pick up settings from
cockpit, but once I realized you had to configure the network again when
adding to the host, everything sort of fell into line. I would make sure
and monitor the networks so you can see the traffic going through the
infiniband and not the ethernet.
>> Users mailing list -- users(a)ovirt.org
>> To unsubscribe send an email to users-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> List Archives: