6:19 p.m.
I initially installed oVirt without Gluster management support. Now I
want to add it in. What is the best method for doing this? I tried
running engine-cleanup and then engine-setup to add it in that way. But
the only thing I accomplished was to hose my install. Now that I have
recovered from that, I still want to add this. Any help would be
appreciated.
--
*NADA Convention & Expo*: January 24-27, 2014 - New Orleans, LA - Booth
5001
<http://www.bbb.org/south-east-florida/business-reviews/advertising-agenci...
10:24 p.m.
Rob Abshear wrote:
I initially installed oVirt without Gluster management support. Now
I
want to add it in. What is the best method for doing this? I tried
running engine-cleanup and then engine-setup to add it in that way.
But the only thing I accomplished was to hose my install. Now that I
have recovered from that, I still want to add this. Any help would be
appreciated.
Just set check the gluster checkbox on the cluster edit page, put the
node/host into maintenance and reinstall it. It will install the gluster
bits and you'll be able to add volumes.
Joop
4:54 a.m.
On 10/29/2013 02:54 AM, Joop wrote:
Rob Abshear wrote:
> I initially installed oVirt without Gluster management support. Now
> I want to add it in. What is the best method for doing this? I
> tried running engine-cleanup and then engine-setup to add it in that
> way. But the only thing I accomplished was to hose my install. Now
> that I have recovered from that, I still want to add this. Any help
> would be appreciated.
Recommended way is to select 'Both' for 'ApplicationMode' during
engine-setup.
But if you want to do this after engine-setup, you need to tweak a
database entry. You could find an option_name called 'ApplicationMode'
in the vdc_options table, change the value of the field to 255, then
restart ovirt-engine service. Now you should able to manage both virt
and gluster in oVirt.
Just set check the gluster checkbox on the cluster edit page, put the
node/host into maintenance and reinstall it. It will install the
gluster bits and you'll be able to add volumes.
This is possible only if oVirt is installed in 'Both' (Virt+Gluster) mode.
Thanks,
Kanagaraj
Joop
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
9:36 a.m.
Hello!
I have installed from iso
ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso in " Both " mode.
When I try to check the gluster checkbox on the cluster edit page, then put
the node in mainenance mode an try to Reinstall I get
"There are no ISO versions that are compatible with the Host's current
version."
On Tue, Oct 29, 2013 at 5:54 AM, Kanagaraj <kmayilsa(a)redhat.com> wrote:
On 10/29/2013 02:54 AM, Joop wrote:
> Rob Abshear wrote:
>
>> I initially installed oVirt without Gluster management support. Now I
>> want to add it in. What is the best method for doing this? I tried
>> running engine-cleanup and then engine-setup to add it in that way. But
>> the only thing I accomplished was to hose my install. Now that I have
>> recovered from that, I still want to add this. Any help would be
>> appreciated.
>>
>
Recommended way is to select 'Both' for 'ApplicationMode' during
engine-setup.
But if you want to do this after engine-setup, you need to tweak a
database entry. You could find an option_name called 'ApplicationMode' in
the vdc_options table, change the value of the field to 255, then restart
ovirt-engine service. Now you should able to manage both virt and gluster
in oVirt.
Just set check the gluster checkbox on the cluster edit page, put the
> node/host into maintenance and reinstall it. It will install the gluster
> bits and you'll be able to add volumes.
>
>
This is possible only if oVirt is installed in 'Both' (Virt+Gluster) mode.
Thanks,
Kanagaraj
Joop
>
>
>
> ______________________________**_________________
> Users mailing list
> Users(a)ovirt.org
>
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
>
______________________________**_________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
1:16 p.m.
Hi,
no, when talking about "both" mode the ovirt-engine (management node)
setup was the targeted installation.
if you did not install the engine in "both" mode, you need to tweak the
DB or reinstall.
HTH
Am 29.10.2013 09:36, schrieb Gabi C:
Hello!
I have installed from iso
ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso in " Both " mode.
When I try to check the gluster checkbox on the cluster edit page, then put
the node in mainenance mode an try to Reinstall I get
"There are no ISO versions that are compatible with the Host's current
version."
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
1:43 p.m.
Hello!
Sorry, I was unclear about my instalation: so my management node is Fedora
19 with Ovirt-stables and ovirt-updates-testing repos enabled installed
with 'Both' - to be sure I 'grep' ed in ovirt-engine-setup
'ApplicationMode' and got 'select
fn_db_add_config_value('ApplicationMode','255','general');' ;
my 2 hosts
(nodes) are virt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso. and
the problem is as described in my previous message.
On Tue, Oct 29, 2013 at 2:16 PM, Sven Kieske <S.Kieske(a)mittwald.de> wrote:
Hi,
no, when talking about "both" mode the ovirt-engine (management node)
setup was the targeted installation.
if you did not install the engine in "both" mode, you need to tweak the
DB or reinstall.
HTH
Am 29.10.2013 09:36, schrieb Gabi C:
> Hello!
>
> I have installed from iso
> ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso in " Both "
mode.
> When I try to check the gluster checkbox on the cluster edit page, then
put
> the node in mainenance mode an try to Reinstall I get
> "There are no ISO versions that are compatible with the Host's current
> version."
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:19 p.m.
On 10/29/2013 02:43 PM, Gabi C wrote:
Hello!
Sorry, I was unclear about my instalation: so my management node is
Fedora 19 with Ovirt-stables and ovirt-updates-testing repos enabled
installed with 'Both' - to be sure I 'grep' ed in ovirt-engine-setup
'ApplicationMode' and got 'select
fn_db_add_config_value('ApplicationMode','255','general');' ;
my 2 hosts
(nodes) are virt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso.
and the problem is as described in my previous message.
hmmm, I'm not sure if ovirt-node has gluster in it out of the box or
not. can you try a regular fedora/centos/rhel host?
thanks,
Itamar
On Tue, Oct 29, 2013 at 2:16 PM, Sven Kieske <S.Kieske(a)mittwald.de
<mailto:S.Kieske@mittwald.de>> wrote:
Hi,
no, when talking about "both" mode the ovirt-engine (management node)
setup was the targeted installation.
if you did not install the engine in "both" mode, you need to tweak the
DB or reinstall.
HTH
Am 29.10.2013 09:36, schrieb Gabi C:
> Hello!
>
> I have installed from iso
> ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso in "
Both " mode.
> When I try to check the gluster checkbox on the cluster edit
page, then put
> the node in mainenance mode an try to Reinstall I get
> "There are no ISO versions that are compatible with the Host's
current
> version."
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100 <tel:%2B49-5772-293-100>
F: +49-5772-293-333 <tel:%2B49-5772-293-333>
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad
Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad
Oeynhausen
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3835
days inactive
3836
days old
6 comments
6 participants
participants (6)
-
Gabi C -
Itamar Heim -
Joop -
Kanagaraj -
Rob Abshear -
Sven Kieske