
This is a multi-part message in MIME format. --------------1D0F68AC599E944098853700 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Please find the logs here: https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0 Thanks. Regards, Arsène Hi, Sorry for this, it seems that the attachment have been detached. So let's try again Regards, Arsène On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn<yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind<arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 --------------1D0F68AC599E944098853700 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> <p>Please find the logs here: <a class="moz-txt-link-freetext" href="https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0">https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0</a></p> <p>Thanks.</p> <p>Regards,<br> Arsène<br> </p> <p>Hi,</p> <p>Sorry for this, it seems that the attachment have been detached.</p> <p>So let's try again</p> <p>Regards,<br> Arsène<br> </p> <br> <div class="moz-cite-prefix">On 06/12/2017 11:59 AM, Martin Sivak wrote:<br> </div> <blockquote type="cite" cite="mid:CAF0zDV6rJKaSTuhQJFZKueEs=2HoiWOAuNc2Oy_9HHFT9y6NXw@mail.gmail.com"> <pre wrap="">Hi, I would love to help you, but I didn't get the log file.. Regards Martin Sivak On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <a class="moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch"><arsene.gschwind@unibas.ch></a> wrote: </pre> <blockquote type="cite"> <pre wrap="">Hi all, Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI. Thanks a lot. Regards, Arsène On 06/07/2017 11:50 AM, Arsène Gschwind wrote: Hi all, Please find attached the agent.log DEBUG and a screenshot from webui Thanks a lot Best regards, Arsène On 06/07/2017 11:27 AM, Martin Sivak wrote: Hi all, Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine. I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM). [1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG Best regards Martin Sivak On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <a class="moz-txt-link-rfc2396E" href="mailto:yquinn@redhat.com"><yquinn@redhat.com></a> wrote: If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ? On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <a class="moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch"><arsene.gschwind@unibas.ch></a> wrote: Hi, Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly? Thanks a lot. Arsène On 06/06/2017 09:50 AM, Arsène Gschwind wrote: Hi, I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow: devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface} I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new The nic device line in vm.conf.new looks like: devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface} I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine: There was an attempt to change Hosted Engine VM values that are locked. Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten? Thanks a lot for any hint/help rgds, arsène -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> </pre> </blockquote> </blockquote> <br> <div class="moz-signature">-- <br> <p class="western" style="margin-bottom: 0in; line-height: 150%"> <font color="#000000"><font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> <b>Arsène Gschwind</b> </font> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> </font> </font> </font> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> </font> </font> <font face="Tahoma, serif"> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> <br> </font> </font> </font> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> Fa. Sapify AG im Auftrag der Universität Basel<br> IT Services<br> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> Tel. +41 79 449 25 63 | </font> </font> </font> <a href="http://its.unibas.ch/"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> http://its.unibas.ch </font> </font> </a><br> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 </font> </font> </font> </font></p> <font color="#000000"> </font></div> </body> </html> --------------1D0F68AC599E944098853700--

I am sorry to say so, but it seems the log archive is corrupted. I can't open it. Regards Martin Sivak On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Please find the logs here: https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11

This is a multi-part message in MIME format. --------------A8B765C4DDCC4981665A6800 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Sorry for that, I haven't checked. I've replaced the log file with a new version which should work i hope. Many Thanks. Regards, Arsène On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Please find the logs here: https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
-- *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 --------------A8B765C4DDCC4981665A6800 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> <p>Sorry for that, I haven't checked.</p> <p>I've replaced the log file with a new version which should work i hope.</p> <p>Many Thanks.</p> <p>Regards,<br> Arsène<br> </p> <br> <div class="moz-cite-prefix">On 06/12/2017 02:33 PM, Martin Sivak wrote:<br> </div> <blockquote type="cite" cite="mid:CAF0zDV6XKvED8a1ra4NMAwC0hvdhcDPq1qBK8TNrw3-R9ikGAQ@mail.gmail.com"> <pre wrap="">I am sorry to say so, but it seems the log archive is corrupted. I can't open it. Regards Martin Sivak On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <a class="moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch"><arsene.gschwind@unibas.ch></a> wrote: </pre> <blockquote type="cite"> <pre wrap="">Please find the logs here: <a class="moz-txt-link-freetext" href="https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0">https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0</a> Thanks. Regards, Arsène Hi, Sorry for this, it seems that the attachment have been detached. So let's try again Regards, Arsène On 06/12/2017 11:59 AM, Martin Sivak wrote: Hi, I would love to help you, but I didn't get the log file.. Regards Martin Sivak On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <a class="moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch"><arsene.gschwind@unibas.ch></a> wrote: Hi all, Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI. Thanks a lot. Regards, Arsène On 06/07/2017 11:50 AM, Arsène Gschwind wrote: Hi all, Please find attached the agent.log DEBUG and a screenshot from webui Thanks a lot Best regards, Arsène On 06/07/2017 11:27 AM, Martin Sivak wrote: Hi all, Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine. I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM). [1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG Best regards Martin Sivak On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <a class="moz-txt-link-rfc2396E" href="mailto:yquinn@redhat.com"><yquinn@redhat.com></a> wrote: If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ? On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <a class="moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch"><arsene.gschwind@unibas.ch></a> wrote: Hi, Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly? Thanks a lot. Arsène On 06/06/2017 09:50 AM, Arsène Gschwind wrote: Hi, I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow: devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface} I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new The nic device line in vm.conf.new looks like: devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface} I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine: There was an attempt to change Hosted Engine VM values that are locked. Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten? Thanks a lot for any hint/help rgds, arsène -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext" href="http://its.unibas.ch">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 </pre> </blockquote> </blockquote> <br> <div class="moz-signature">-- <br> <p class="western" style="margin-bottom: 0in; line-height: 150%"> <font color="#000000"><font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> <b>Arsène Gschwind</b> </font> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> </font> </font> </font> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> </font> </font> <font face="Tahoma, serif"> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> <br> </font> </font> </font> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> Fa. Sapify AG im Auftrag der Universität Basel<br> IT Services<br> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> Tel. +41 79 449 25 63 | </font> </font> </font> <a href="http://its.unibas.ch/"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> http://its.unibas.ch </font> </font> </a><br> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 </font> </font> </font> </font></p> <font color="#000000"> </font></div> </body> </html> --------------A8B765C4DDCC4981665A6800--

Hi Arseny, Looking at the log the ovf doesn't contain the ovirtmgmt network. 1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network? Thanks, Jenny On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch
wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind<arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Please find the logs here:https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind<arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> <yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

This is a multi-part message in MIME format. --------------1A6440A91943662E71A4A024 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Hi Jenny, 1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored? 2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values. Thanks a lot for your help. Regards, Arsène On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Please find the logs here: https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0 <https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0>
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn<yquinn@redhat.com> <mailto:yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind<arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063> | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
-- *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 --------------1A6440A91943662E71A4A024 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> <p>Hi Jenny,</p> <p>1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?</p> <p>2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.</p> <p>Thanks a lot for your help.</p> <p>Regards,<br> Arsène<br> </p> <p><br> </p> <br> <div class="moz-cite-prefix">On 06/14/2017 01:26 PM, Evgenia Tokar wrote:<br> </div> <blockquote type="cite" cite="mid:CA+79JEqfV86KGg1u4BbV=CSOZop+9NjCS+gTCPpJaYH-9d4OUw@mail.gmail.com"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <div dir="ltr"> <div> <div> <div>Hi Arseny, <br> </div> <br> Looking at the log the ovf doesn't contain the ovirtmgmt network. <br> </div> <br> 1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. <br> </div> 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network? <br> <div><br> </div> <div>Thanks, <br> </div> <div>Jenny <br> </div> <div><br> </div> </div> <div class="gmail_extra"><br> <div class="gmail_quote">On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <span dir="ltr"><<a href="mailto:arsene.gschwind@unibas.ch" target="_blank" moz-do-not-send="true">arsene.gschwind@unibas.ch</a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div text="#000000" bgcolor="#FFFFFF"> <p>Sorry for that, I haven't checked.</p> <p>I've replaced the log file with a new version which should work i hope.</p> <p>Many Thanks.</p> <p>Regards,<br> Arsène<br> </p> <div> <div class="h5"> <br> <div class="m_2960551735955314505moz-cite-prefix">On 06/12/2017 02:33 PM, Martin Sivak wrote:<br> </div> <blockquote type="cite"> <pre>I am sorry to say so, but it seems the log archive is corrupted. I can't open it. Regards Martin Sivak On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <a class="m_2960551735955314505moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch" target="_blank" moz-do-not-send="true"><arsene.gschwind@unibas.ch></a> wrote: </pre> <blockquote type="cite"> <pre>Please find the logs here: <a class="m_2960551735955314505moz-txt-link-freetext" href="https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0" target="_blank" moz-do-not-send="true">https://www.dropbox.com/sh/<wbr>k2zk7ig4tbd9tnj/<wbr>AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0</a> Thanks. Regards, Arsène Hi, Sorry for this, it seems that the attachment have been detached. So let's try again Regards, Arsène On 06/12/2017 11:59 AM, Martin Sivak wrote: Hi, I would love to help you, but I didn't get the log file.. Regards Martin Sivak On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <a class="m_2960551735955314505moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch" target="_blank" moz-do-not-send="true"><arsene.gschwind@unibas.ch></a> wrote: Hi all, Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI. Thanks a lot. Regards, Arsène On 06/07/2017 11:50 AM, Arsène Gschwind wrote: Hi all, Please find attached the agent.log DEBUG and a screenshot from webui Thanks a lot Best regards, Arsène On 06/07/2017 11:27 AM, Martin Sivak wrote: Hi all, Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine. I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM). [1] See /etc/ovirt-hosted-engine-ha/<wbr>agent-log.conf and change the level for root logger to DEBUG Best regards Martin Sivak On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <a class="m_2960551735955314505moz-txt-link-rfc2396E" href="mailto:yquinn@redhat.com" target="_blank" moz-do-not-send="true"><yquinn@redhat.com></a> wrote: If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ? On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <a class="m_2960551735955314505moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch" target="_blank" moz-do-not-send="true"><arsene.gschwind@unibas.ch></a> wrote: Hi, Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly? Thanks a lot. Arsène On 06/06/2017 09:50 AM, Arsène Gschwind wrote: Hi, I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow: devices={nicModel:pv,macAddr:<wbr>00:16:3e:3a:6b:60,linkActive:<wbr>true,network:None,deviceId:<wbr>56cb4d71-13ff-42a8-bb83-<wbr>7faef99fd3ea,address:{slot:<wbr>0x03,bus:0x00,domain:0x0000,<wbr>type:pci,function:0x0},device:<wbr>bridge,type:interface} I've created a new config file /var/run/ovirt-hosted-engine-<wbr>ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-<wbr>hosted-engine-ha/vm.conf.new The nic device line in vm.conf.new looks like: devices={nicModel:pv,macAddr:<wbr>00:16:3e:3a:6b:60,linkActive:<wbr>true,network:ovirtmgmt,<wbr>deviceId:56cb4d71-13ff-42a8-<wbr>bb83-7faef99fd3ea,address:{<wbr>slot:0x03,bus:0x00,domain:<wbr>0x0000,type:pci,function:0x0},<wbr>device:bridge,type:interface} I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine: There was an attempt to change Hosted Engine VM values that are locked. Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten? Thanks a lot for any hint/help rgds, arsène -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | <a class="m_2960551735955314505moz-txt-link-freetext" href="http://its.unibas.ch" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch" target="_blank" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:+41%2061%20267%2014%2011" value="+41612671411" target="_blank" moz-do-not-send="true">+41 61 267 14 11</a> ______________________________<wbr>_________________ Users mailing list <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:Users@ovirt.org" target="_blank" moz-do-not-send="true">Users@ovirt.org</a> <a class="m_2960551735955314505moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. <a href="tel:+41%2079%20449%2025%2063" value="+41794492563" target="_blank" moz-do-not-send="true">+41 79 449 25 63</a> | <a class="m_2960551735955314505moz-txt-link-freetext" href="http://its.unibas.ch" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch" target="_blank" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:+41%2061%20267%2014%2011" value="+41612671411" target="_blank" moz-do-not-send="true">+41 61 267 14 11</a> ______________________________<wbr>_________________ Users mailing list <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:Users@ovirt.org" target="_blank" moz-do-not-send="true">Users@ovirt.org</a> <a class="m_2960551735955314505moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a> ______________________________<wbr>_________________ Users mailing list <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:Users@ovirt.org" target="_blank" moz-do-not-send="true">Users@ovirt.org</a> <a class="m_2960551735955314505moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. <a href="tel:+41%2079%20449%2025%2063" value="+41794492563" target="_blank" moz-do-not-send="true">+41 79 449 25 63</a> | <a class="m_2960551735955314505moz-txt-link-freetext" href="http://its.unibas.ch" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch" target="_blank" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:+41%2061%20267%2014%2011" value="+41612671411" target="_blank" moz-do-not-send="true">+41 61 267 14 11</a> ______________________________<wbr>_________________ Users mailing list <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:Users@ovirt.org" target="_blank" moz-do-not-send="true">Users@ovirt.org</a> <a class="m_2960551735955314505moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. <a href="tel:+41%2079%20449%2025%2063" value="+41794492563" target="_blank" moz-do-not-send="true">+41 79 449 25 63</a> | <a class="m_2960551735955314505moz-txt-link-freetext" href="http://its.unibas.ch" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch" target="_blank" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:+41%2061%20267%2014%2011" value="+41612671411" target="_blank" moz-do-not-send="true">+41 61 267 14 11</a> ______________________________<wbr>_________________ Users mailing list <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:Users@ovirt.org" target="_blank" moz-do-not-send="true">Users@ovirt.org</a> <a class="m_2960551735955314505moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a> -- Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. <a href="tel:+41%2079%20449%2025%2063" value="+41794492563" target="_blank" moz-do-not-send="true">+41 79 449 25 63</a> | <a class="m_2960551735955314505moz-txt-link-freetext" href="http://its.unibas.ch" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a> ITS-ServiceDesk: <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch" target="_blank" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:+41%2061%20267%2014%2011" value="+41612671411" target="_blank" moz-do-not-send="true">+41 61 267 14 11</a> </pre> </blockquote> </blockquote> <br> <div class="m_2960551735955314505moz-signature">-- <br> <p class="m_2960551735955314505western" style="margin-bottom:0in;line-height:150%"> <font color="#000000"><font face="Tahoma, serif"> <font style="font-size:8pt" size="1"> <b>Arsène Gschwind</b> </font> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size:8pt" size="1"> </font> </font> </font> <font face="Tahoma, serif"> <font style="font-size:8pt" size="1"> </font> </font> <font face="Tahoma, serif"> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size:8pt" size="1"> <br> </font> </font> </font> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size:8pt" size="1"> Fa. Sapify AG im Auftrag der Universität Basel<br> IT Services<br> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> Tel. <a href="tel:+41%2079%20449%2025%2063" value="+41794492563" target="_blank" moz-do-not-send="true">+41 79 449 25 63</a> | </font> </font> </font> <a href="http://its.unibas.ch/" target="_blank" moz-do-not-send="true"> <font face="Tahoma, serif"> <font style="font-size:8pt" size="1"> http://its.unibas.ch </font> </font> </a><br> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size:8pt" size="1"> ITS-ServiceDesk: <a class="m_2960551735955314505moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch" target="_blank" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:+41%2061%20267%2014%2011" value="+41612671411" target="_blank" moz-do-not-send="true">+41 61 267 14 11</a> </font> </font> </font> </font></p> <font color="#000000"> </font></div> </div> </div> </div> <br> ______________________________<wbr>_________________<br> Users mailing list<br> <a href="mailto:Users@ovirt.org" moz-do-not-send="true">Users@ovirt.org</a><br> <a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a><br> <br> </blockquote> </div> <br> </div> </blockquote> <br> <div class="moz-signature">-- <br> <p class="western" style="margin-bottom: 0in; line-height: 150%"> <font color="#000000"><font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> <b>Arsène Gschwind</b> </font> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> </font> </font> </font> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> </font> </font> <font face="Tahoma, serif"> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> <br> </font> </font> </font> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> Fa. Sapify AG im Auftrag der Universität Basel<br> IT Services<br> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> Tel. +41 79 449 25 63 | </font> </font> </font> <a href="http://its.unibas.ch/"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> http://its.unibas.ch </font> </font> </a><br> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 </font> </font> </font> </font></p> <font color="#000000"> </font></div> </body> </html> --------------1A6440A91943662E71A4A024--

Hi, It should be in one of the directories on your storage domain: ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId> To see which one you can run the following command: vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId> the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 the storage pool id can be found using: vdsm-client StorageDomain getInfo storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905 The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for. Untar it and it should contain the original vm.conf which was used to start the hosted engine. Jenny Tokar On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind <arsene.gschwind@unibas.ch
wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards, Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind < arsene.gschwind@unibas.ch> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind<arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Please find the logs here:https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind<arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> <yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>

Hi Jenny, Thanks for the explanations.. Please find vm.conf attached, it looks like the ovirtmgmt network is defined Regards, Arsène On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,
It should be in one of the directories on your storage domain: ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId>
To see which one you can run the following command:
vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>
the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 the storage pool id can be found using: vdsm-client StorageDomain getInfo storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905
The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for. Untar it and it should contain the original vm.conf which was used to start the hosted engine.
Jenny Tokar
On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards, Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Please find the logs here: https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0 <https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0>
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn<yquinn@redhat.com> <mailto:yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind<arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063> | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063> | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
-- *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11

HI Arsene Just to be clear, can you write down the steps to reproduce ? (the migration procedure . and if possible the state before and after) Thanks On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
Thanks for the explanations..
Please find vm.conf attached, it looks like the ovirtmgmt network is defined
Regards, Arsène
On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,
It should be in one of the directories on your storage domain: ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId>
To see which one you can run the following command:
vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>
the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 the storage pool id can be found using: vdsm-client StorageDomain getInfo storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905
The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for. Untar it and it should contain the original vm.conf which was used to start the hosted engine.
Jenny Tokar
On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind < arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards, Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind < arsene.gschwind@unibas.ch> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind<arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Please find the logs here:https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind<arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> <yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Hi Yanir, We had our oVirt Engine running on a HW server so we decided to move it to hosted-engine. For this I've followed the Howto at http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_Meta.... The Hosted-Storage is located on a FC SAN LUN. Please find attached the setup log. Tanks a lot. Regards, Arsène On 06/21/2017 10:14 AM, Yanir Quinn wrote:
HI Arsene
Just to be clear, can you write down the steps to reproduce ? (the migration procedure . and if possible the state before and after)
Thanks
On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote:
Hi Jenny,
Thanks for the explanations..
Please find vm.conf attached, it looks like the ovirtmgmt network is defined
Regards, Arsène
On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,
It should be in one of the directories on your storage domain: ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId>
To see which one you can run the following command:
vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>
the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 the storage pool id can be found using: vdsm-client StorageDomain getInfo storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905
The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for. Untar it and it should contain the original vm.conf which was used to start the hosted engine.
Jenny Tokar
On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards, Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Please find the logs here: https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0 <https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0>
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn<yquinn@redhat.com> <mailto:yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind<arsene.gschwind@unibas.ch> <mailto:arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel.+41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |http://its.unibas.ch ITS-ServiceDesk:support-its@unibas.ch <mailto:support-its@unibas.ch> |+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063> | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063> | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063> | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
-- *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11

Adding Didi, Didi, do you happen to know of scenarios where we use the migration scripts and the nic in the OVF is gone missing ? (maybe after the restore stage) Regards, Yanir On Wed, Jun 21, 2017 at 12:02 PM, Arsène Gschwind <arsene.gschwind@unibas.ch
wrote:
Hi Yanir,
We had our oVirt Engine running on a HW server so we decided to move it to hosted-engine. For this I've followed the Howto at http://www.ovirt.org/ documentation/self-hosted/chap-Migrating_from_Bare_ Metal_to_an_EL-Based_Self-Hosted_Environment/.
The Hosted-Storage is located on a FC SAN LUN.
Please find attached the setup log.
Tanks a lot.
Regards, Arsène
On 06/21/2017 10:14 AM, Yanir Quinn wrote:
HI Arsene
Just to be clear, can you write down the steps to reproduce ? (the migration procedure . and if possible the state before and after)
Thanks
On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind < arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
Thanks for the explanations..
Please find vm.conf attached, it looks like the ovirtmgmt network is defined
Regards, Arsène
On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,
It should be in one of the directories on your storage domain: ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId>
To see which one you can run the following command:
vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>
the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 the storage pool id can be found using: vdsm-client StorageDomain getInfo storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905
The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for. Untar it and it should contain the original vm.conf which was used to start the hosted engine.
Jenny Tokar
On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind < arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards, Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind < arsene.gschwind@unibas.ch> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind<arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Please find the logs here:https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind<arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> <yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> <arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch
ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>

On Thu, Jun 22, 2017 at 2:32 PM, Yanir Quinn <yquinn@redhat.com> wrote:
Adding Didi, Didi, do you happen to know of scenarios where we use the migration scripts and the nic in the OVF is gone missing ? (maybe after the restore stage)
I do not think I understand the question. Migration from standalone to hosted-engine does not involve a nic in an ovf, AFAIU. To get/set stuff on the shared storage, hosted-engine has options '--{get,set}-shared-config', see also: https://bugzilla.redhat.com/show_bug.cgi?id=1301681 For the engine vm.conf, indeed it's updated from data in the engine db, but I do not know well the details. Adding Simone.
Regards, Yanir
On Wed, Jun 21, 2017 at 12:02 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Yanir,
We had our oVirt Engine running on a HW server so we decided to move it to hosted-engine. For this I've followed the Howto at http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_Meta....
The Hosted-Storage is located on a FC SAN LUN.
Please find attached the setup log.
Tanks a lot.
Regards, Arsène
On 06/21/2017 10:14 AM, Yanir Quinn wrote:
HI Arsene
Just to be clear, can you write down the steps to reproduce ? (the migration procedure . and if possible the state before and after)
Thanks
On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
Thanks for the explanations..
Please find vm.conf attached, it looks like the ovirtmgmt network is defined
Regards, Arsène
On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,
It should be in one of the directories on your storage domain: ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId>
To see which one you can run the following command:
vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>
the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 the storage pool id can be found using: vdsm-client StorageDomain getInfo storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905
The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for. Untar it and it should contain the original vm.conf which was used to start the hosted engine.
Jenny Tokar
On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards, Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you have an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Please find the logs here:
https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then (the xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
-- Didi

The set-shared-config does not allow editing of the vm.conf or the ovf. The original vm.conf that the hosted engine vm was started with contains the correct network, so it must have been removed at a later stage. To get a working environment I don't see another option then fixing the network in the db. What do the following queries return: 1. select vm_interface.vm_guid, vnic_profile_id from vm_interface, vm_static where vm_name='HostedEngine'; 2. select id from vnic_profiles where name='ovirtmgmt'; The vnic profile id that is returned from the first query should be the same as the one that has the ovirtmgmt name in the second query. Thanks, Jenny Jenny Tokar On Thu, Jun 22, 2017 at 2:53 PM, Yedidyah Bar David <didi@redhat.com> wrote:
Adding Didi, Didi, do you happen to know of scenarios where we use the migration
On Thu, Jun 22, 2017 at 2:32 PM, Yanir Quinn <yquinn@redhat.com> wrote: scripts
and the nic in the OVF is gone missing ? (maybe after the restore stage)
I do not think I understand the question.
Migration from standalone to hosted-engine does not involve a nic in an ovf, AFAIU.
To get/set stuff on the shared storage, hosted-engine has options '--{get,set}-shared-config', see also:
https://bugzilla.redhat.com/show_bug.cgi?id=1301681
For the engine vm.conf, indeed it's updated from data in the engine db, but I do not know well the details. Adding Simone.
Regards, Yanir
On Wed, Jun 21, 2017 at 12:02 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Yanir,
We had our oVirt Engine running on a HW server so we decided to move it
hosted-engine. For this I've followed the Howto at http://www.ovirt.org/documentation/self-hosted/ chap-Migrating_from_Bare_Metal_to_an_EL-Based_Self-Hosted_Environment/.
The Hosted-Storage is located on a FC SAN LUN.
Please find attached the setup log.
Tanks a lot.
Regards, Arsène
On 06/21/2017 10:14 AM, Yanir Quinn wrote:
HI Arsene
Just to be clear, can you write down the steps to reproduce ? (the migration procedure . and if possible the state before and after)
Thanks
On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
Thanks for the explanations..
Please find vm.conf attached, it looks like the ovirtmgmt network is defined
Regards, Arsène
On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,
It should be in one of the directories on your storage domain: ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId>
To see which one you can run the following command:
vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>
the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 the storage pool id can be found using: vdsm-client StorageDomain
getInfo
storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905
The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for. Untar it and it should contain the original vm.conf which was used to start the hosted engine.
Jenny Tokar
On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards, Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you
have
an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Sorry for that, I haven't checked.
I've replaced the log file with a new version which should work i
hope.
Many Thanks.
Regards, Arsène
On 06/12/2017 02:33 PM, Martin Sivak wrote:
I am sorry to say so, but it seems the log archive is corrupted. I can't open it.
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Please find the logs here:
AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0
Thanks.
Regards, Arsène
Hi,
Sorry for this, it seems that the attachment have been detached.
So let's try again
Regards, Arsène
On 06/12/2017 11:59 AM, Martin Sivak wrote:
Hi,
I would love to help you, but I didn't get the log file..
Regards
Martin Sivak
On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards, Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was retrieved from the engine.
I might be interesting to check what the configuration of the engine VM shows when edited using the webadmin. Or enable debug logging [1] for hosted engine and add the OVF dump we send there now and then
(the
xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the database , but i wouldn't recommend meddling with DB data. maybe the network device wasn't set properly during the hosted engine setup ?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage LUN, so far so good. For some reason I'm not able to start the hosted-engine VM, after digging in the log files i could figured out the reason. The Network device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to ovirtmgnt, the I could start the hosted-engine using : hosted-engine --vm-start --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:
to true,network:None,deviceId:56cb4d71-13ff-42a8-bb83- 7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000, type:pci,function:0x0},device:bridge,type:interface} true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8- bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain: 0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is constantly rewritten, even when using the webui is say's: HostedEngine:
There was an attempt to change Hosted Engine VM values that are
locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will stay and not be overwritten?
Thanks a lot for any hint/help
rgds, arsène
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
-- Didi

This is a multi-part message in MIME format. --------------B6D4EB7978E5A3B037777BC9 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Would re-deploying the hosted-engine and restoring the backup be an option? Thanks a lot for your help Rgds, Arsène On 06/27/2017 03:15 PM, Evgenia Tokar wrote:
The set-shared-config does not allow editing of the vm.conf or the ovf.
The original vm.conf that the hosted engine vm was started with contains the correct network, so it must have been removed at a later stage.
To get a working environment I don't see another option then fixing the network in the db. What do the following queries return: 1. select vm_interface.vm_guid, vnic_profile_id from vm_interface, vm_static where vm_name='HostedEngine'; 2. select id from vnic_profiles where name='ovirtmgmt'; The vnic profile id that is returned from the first query should be the same as the one that has the ovirtmgmt name in the second query.
Thanks, Jenny
Jenny Tokar
On Thu, Jun 22, 2017 at 2:53 PM, Yedidyah Bar David <didi@redhat.com <mailto:didi@redhat.com>> wrote:
On Thu, Jun 22, 2017 at 2:32 PM, Yanir Quinn <yquinn@redhat.com <mailto:yquinn@redhat.com>> wrote: > Adding Didi, > Didi, do you happen to know of scenarios where we use the migration scripts > and the nic in the OVF is gone missing ? (maybe after the restore stage)
I do not think I understand the question.
Migration from standalone to hosted-engine does not involve a nic in an ovf, AFAIU.
To get/set stuff on the shared storage, hosted-engine has options '--{get,set}-shared-config', see also:
https://bugzilla.redhat.com/show_bug.cgi?id=1301681 <https://bugzilla.redhat.com/show_bug.cgi?id=1301681>
For the engine vm.conf, indeed it's updated from data in the engine db, but I do not know well the details. Adding Simone.
> > Regards, > Yanir > > On Wed, Jun 21, 2017 at 12:02 PM, Arsène Gschwind > <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote: >> >> Hi Yanir, >> >> We had our oVirt Engine running on a HW server so we decided to move it to >> hosted-engine. For this I've followed the Howto at >> http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_Meta... <http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_Metal_to_an_EL-Based_Self-Hosted_Environment/>. >> >> The Hosted-Storage is located on a FC SAN LUN. >> >> Please find attached the setup log. >> >> Tanks a lot. >> >> Regards, >> Arsène >> >> >> On 06/21/2017 10:14 AM, Yanir Quinn wrote: >> >> HI Arsene >> >> Just to be clear, can you write down the steps to reproduce ? (the >> migration procedure . and if possible the state before and after) >> >> Thanks >> >> On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind >> <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote: >>> >>> Hi Jenny, >>> >>> Thanks for the explanations.. >>> >>> Please find vm.conf attached, it looks like the ovirtmgmt network is >>> defined >>> >>> Regards, >>> Arsène >>> >>> >>> On 06/19/2017 01:46 PM, Evgenia Tokar wrote: >>> >>> Hi, >>> >>> It should be in one of the directories on your storage domain: >>> ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId> >>> >>> To see which one you can run the following command: >>> >>> vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> >>> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId> >>> >>> the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 >>> the storage pool id can be found using: vdsm-client StorageDomain getInfo >>> storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905 >>> >>> The volume that has "description": "HostedEngineConfigurationImage" is >>> the one you are looking for. >>> Untar it and it should contain the original vm.conf which was used to >>> start the hosted engine. >>> >>> Jenny Tokar >>> >>> >>> On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind >>> <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote: >>>> >>>> Hi Jenny, >>>> >>>> 1. I couldn't locate any tar file containing vm.conf, do you know the >>>> exact place where it is stored? >>>> >>>> 2. The ovirtmgmt appears in the network dropdown but I'm not able to >>>> change since it complains about locked values. >>>> >>>> Thanks a lot for your help. >>>> >>>> Regards, >>>> Arsène >>>> >>>> >>>> >>>> On 06/14/2017 01:26 PM, Evgenia Tokar wrote: >>>> >>>> Hi Arseny, >>>> >>>> Looking at the log the ovf doesn't contain the ovirtmgmt network. >>>> >>>> 1. Can you provide the original vm.conf file the engine was started >>>> with? It is located in a tar archive on your storage domain. >>>> 2. It's uncelar from the screenshot, in the network dropdown do you have >>>> an option to add a ovirtmgmt network? >>>> >>>> Thanks, >>>> Jenny >>>> >>>> >>>> On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind >>>> <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote: >>>>> >>>>> Sorry for that, I haven't checked. >>>>> >>>>> I've replaced the log file with a new version which should work i hope. >>>>> >>>>> Many Thanks. >>>>> >>>>> Regards, >>>>> Arsène >>>>> >>>>> >>>>> On 06/12/2017 02:33 PM, Martin Sivak wrote: >>>>> >>>>> I am sorry to say so, but it seems the log archive is corrupted. I >>>>> can't open it. >>>>> >>>>> Regards >>>>> >>>>> Martin Sivak >>>>> >>>>> On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind >>>>> <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote: >>>>> >>>>> Please find the logs here: >>>>> >>>>> https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0 <https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0> >>>>> >>>>> Thanks. >>>>> >>>>> Regards, >>>>> Arsène >>>>> >>>>> Hi, >>>>> >>>>> Sorry for this, it seems that the attachment have been detached. >>>>> >>>>> So let's try again >>>>> >>>>> Regards, >>>>> Arsène >>>>> >>>>> >>>>> On 06/12/2017 11:59 AM, Martin Sivak wrote: >>>>> >>>>> Hi, >>>>> >>>>> I would love to help you, but I didn't get the log file.. >>>>> >>>>> Regards >>>>> >>>>> Martin Sivak >>>>> >>>>> On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind >>>>> <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> wrote: >>>>> >>>>> Hi all, >>>>> >>>>> Any chance to get help or a hint to solve my Problem, I have no idea >>>>> how to >>>>> change this configuration since it is not possible using the WebUI. >>>>> >>>>> Thanks a lot. >>>>> >>>>> Regards, >>>>> Arsène >>>>> >>>>> >>>>> On 06/07/2017 11:50 AM, Arsène Gschwind wrote: >>>>> >>>>> Hi all, >>>>> >>>>> Please find attached the agent.log DEBUG and a screenshot from webui >>>>> >>>>> Thanks a lot >>>>> >>>>> Best regards, >>>>> >>>>> Arsène >>>>> >>>>> >>>>> On 06/07/2017 11:27 AM, Martin Sivak wrote: >>>>> >>>>> Hi all, >>>>> >>>>> Yanir is right, the local vm.conf is just a cache of what was >>>>> retrieved from the engine. >>>>> >>>>> I might be interesting to check what the configuration of the engine >>>>> VM shows when edited using the webadmin. Or enable debug logging [1] >>>>> for hosted engine and add the OVF dump we send there now and then (the >>>>> xml representation of the VM). >>>>> >>>>> [1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the >>>>> level for root logger to DEBUG >>>>> >>>>> Best regards >>>>> >>>>> Martin Sivak >>>>> >>>>> On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com <mailto:yquinn@redhat.com>> wrote: >>>>> >>>>> If im not mistaken the values of vm.conf are repopulated from the >>>>> database , >>>>> but i wouldn't recommend meddling with DB data. >>>>> maybe the network device wasn't set properly during the hosted engine >>>>> setup >>>>> ? >>>>> >>>>> On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind >>>>> <arsene.gschwind@unibas.ch <mailto:arsene.gschwind@unibas.ch>> >>>>> wrote: >>>>> >>>>> Hi, >>>>> >>>>> Any chance to get a hint how to change the vm.conf file so it will not >>>>> be >>>>> overwritten constantly? >>>>> >>>>> Thanks a lot. >>>>> >>>>> Arsène >>>>> >>>>> >>>>> On 06/06/2017 09:50 AM, Arsène Gschwind wrote: >>>>> >>>>> Hi, >>>>> >>>>> I've migrated our oVirt engine to hosted-engine located on a FC storage >>>>> LUN, so far so good. >>>>> For some reason I'm not able to start the hosted-engine VM, after >>>>> digging >>>>> in the log files i could figured out the reason. The Network device was >>>>> set >>>>> to "None" as follow: >>>>> >>>>> >>>>> devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface} >>>>> >>>>> I've created a new config file >>>>> /var/run/ovirt-hosted-engine-ha/vm.conf.new >>>>> and set the nic device to ovirtmgnt, the I could start the >>>>> hosted-engine >>>>> using : >>>>> hosted-engine --vm-start >>>>> --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new >>>>> >>>>> The nic device line in vm.conf.new looks like: >>>>> >>>>> >>>>> devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface} >>>>> >>>>> I tried to find out a way to change this setting on vm.conf but it is >>>>> constantly rewritten, even when using the webui is say's: >>>>> HostedEngine: >>>>> >>>>> There was an attempt to change Hosted Engine VM values that are locked. >>>>> >>>>> Is there a way to modify/correct the hosted-engine vm.conf file so it >>>>> will >>>>> stay and not be overwritten? >>>>> >>>>> Thanks a lot for any hint/help >>>>> >>>>> rgds, >>>>> arsène >>>>> >>>>> -- >>>>> >>>>> Arsène Gschwind >>>>> Fa. Sapify AG im Auftrag der Universität Basel >>>>> IT Services >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>>> Tel. +41 79 449 25 63 | http://its.unibas.ch >>>>> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:%2B41%2061%20267%2014%2011> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@ovirt.org <mailto:Users@ovirt.org> >>>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> >>>>> >>>>> >>>>> -- >>>>> >>>>> Arsène Gschwind >>>>> Fa. Sapify AG im Auftrag der Universität Basel >>>>> IT Services >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>>> Tel. +41 79 449 25 63 <tel:%2B41%2079%20449%2025%2063> | http://its.unibas.ch >>>>> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:%2B41%2061%20267%2014%2011> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@ovirt.org <mailto:Users@ovirt.org> >>>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@ovirt.org <mailto:Users@ovirt.org> >>>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> >>>>> >>>>> >>>>> -- >>>>> >>>>> Arsène Gschwind >>>>> Fa. Sapify AG im Auftrag der Universität Basel >>>>> IT Services >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>>> Tel. +41 79 449 25 63 <tel:%2B41%2079%20449%2025%2063> | http://its.unibas.ch >>>>> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:%2B41%2061%20267%2014%2011> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@ovirt.org <mailto:Users@ovirt.org> >>>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> >>>>> >>>>> >>>>> -- >>>>> >>>>> Arsène Gschwind >>>>> Fa. Sapify AG im Auftrag der Universität Basel >>>>> IT Services >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>>> Tel. +41 79 449 25 63 <tel:%2B41%2079%20449%2025%2063> | http://its.unibas.ch >>>>> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:%2B41%2061%20267%2014%2011> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@ovirt.org <mailto:Users@ovirt.org> >>>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> >>>>> >>>>> >>>>> -- >>>>> >>>>> Arsène Gschwind >>>>> Fa. Sapify AG im Auftrag der Universität Basel >>>>> IT Services >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>>> Tel. +41 79 449 25 63 <tel:%2B41%2079%20449%2025%2063> | http://its.unibas.ch >>>>> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:%2B41%2061%20267%2014%2011> >>>>> >>>>> >>>>> -- >>>>> >>>>> Arsène Gschwind >>>>> Fa. Sapify AG im Auftrag der Universität Basel >>>>> IT Services >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>>> Tel. +41 79 449 25 63 <tel:%2B41%2079%20449%2025%2063> | http://its.unibas.ch >>>>> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 <tel:%2B41%2061%20267%2014%2011> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@ovirt.org <mailto:Users@ovirt.org> >>>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> >>>>> >>>> >>>> >>>> -- >>>> >>>> Arsène Gschwind >>>> Fa. Sapify AG im Auftrag der Universität Basel >>>> IT Services >>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>> Tel. +41 79 449 25 63 <tel:%2B41%2079%20449%2025%2063> | http://its.unibas.ch >>>> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 >>> >>> >>> >>> -- >>> >>> Arsène Gschwind >>> Fa. Sapify AG im Auftrag der Universität Basel >>> IT Services >>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>> Tel. +41 79 449 25 63 | http://its.unibas.ch >>> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users@ovirt.org <mailto:Users@ovirt.org> >>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> >>> >> >> >> -- >> >> Arsène Gschwind >> Fa. Sapify AG im Auftrag der Universität Basel >> IT Services >> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >> Tel. +41 79 449 25 63 | http://its.unibas.ch >> ITS-ServiceDesk: support-its@unibas.ch <mailto:support-its@unibas.ch> | +41 61 267 14 11 > >
-- Didi
-- *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 --------------B6D4EB7978E5A3B037777BC9 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> <p>Would re-deploying the hosted-engine and restoring the backup be an option?<br> </p> <p>Thanks a lot for your help</p> <p>Rgds,<br> Arsène<br> </p> <br> <div class="moz-cite-prefix">On 06/27/2017 03:15 PM, Evgenia Tokar wrote:<br> </div> <blockquote type="cite" cite="mid:CA+79JEpQBahtTO4f9xYZZC+mK36cv_e3aT5d3NV+AAP7Es_fPA@mail.gmail.com"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <div dir="ltr"> <div> <div> <div>The set-shared-config does not allow editing of the vm.conf or the ovf. <br> <br> </div> The original vm.conf that the hosted engine vm was started with contains the correct network, so it must have been removed at a later stage.<br> <br> </div> To get a working environment I don't see another option then fixing the network in the db.<br> </div> What do the following queries return: <br> <div> <div> <div> 1. select vm_interface.vm_guid, vnic_profile_id from vm_interface, vm_static where vm_name='HostedEngine';<br> 2. select id from vnic_profiles where name='ovirtmgmt';<br> </div> <div>The vnic profile id that is returned from the first query should be the same as the one that has the ovirtmgmt name in the second query. <br> </div> <div><br> </div> <div>Thanks, <br> </div> <div>Jenny<br> </div> <div><br> <br> </div> </div> </div> </div> <div class="gmail_extra"><br clear="all"> <div> <div class="gmail_signature" data-smartmail="gmail_signature"> <div dir="ltr"> <div> <div dir="ltr"> <div> <div>Jenny Tokar<br> </div> <br> </div> </div> </div> </div> </div> </div> <br> <div class="gmail_quote">On Thu, Jun 22, 2017 at 2:53 PM, Yedidyah Bar David <span dir="ltr"><<a href="mailto:didi@redhat.com" target="_blank" moz-do-not-send="true">didi@redhat.com</a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class="">On Thu, Jun 22, 2017 at 2:32 PM, Yanir Quinn <<a href="mailto:yquinn@redhat.com" moz-do-not-send="true">yquinn@redhat.com</a>> wrote:<br> > Adding Didi,<br> > Didi, do you happen to know of scenarios where we use the migration scripts<br> > and the nic in the OVF is gone missing ? (maybe after the restore stage)<br> <br> </span>I do not think I understand the question.<br> <br> Migration from standalone to hosted-engine does not involve a nic<br> in an ovf, AFAIU.<br> <br> To get/set stuff on the shared storage, hosted-engine has options<br> '--{get,set}-shared-config', see also:<br> <br> <a href="https://bugzilla.redhat.com/show_bug.cgi?id=1301681" rel="noreferrer" target="_blank" moz-do-not-send="true">https://bugzilla.redhat.com/<wbr>show_bug.cgi?id=1301681</a><br> <br> For the engine vm.conf, indeed it's updated from data in the engine<br> db, but I do not know well the details. Adding Simone.<br> <div class="HOEnZb"> <div class="h5"><br> ><br> > Regards,<br> > Yanir<br> ><br> > On Wed, Jun 21, 2017 at 12:02 PM, Arsène Gschwind<br> > <<a href="mailto:arsene.gschwind@unibas.ch" moz-do-not-send="true">arsene.gschwind@unibas.ch</a>> wrote:<br> >><br> >> Hi Yanir,<br> >><br> >> We had our oVirt Engine running on a HW server so we decided to move it to<br> >> hosted-engine. For this I've followed the Howto at<br> >> <a href="http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_Meta..." rel="noreferrer" target="_blank" moz-do-not-send="true">http://www.ovirt.org/<wbr>documentation/self-hosted/<wbr>chap-Migrating_from_Bare_<wbr>Metal_to_an_EL-Based_Self-<wbr>Hosted_Environment/</a>.<br> >><br> >> The Hosted-Storage is located on a FC SAN LUN.<br> >><br> >> Please find attached the setup log.<br> >><br> >> Tanks a lot.<br> >><br> >> Regards,<br> >> Arsène<br> >><br> >><br> >> On 06/21/2017 10:14 AM, Yanir Quinn wrote:<br> >><br> >> HI Arsene<br> >><br> >> Just to be clear, can you write down the steps to reproduce ? (the<br> >> migration procedure . and if possible the state before and after)<br> >><br> >> Thanks<br> >><br> >> On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind<br> >> <<a href="mailto:arsene.gschwind@unibas.ch" moz-do-not-send="true">arsene.gschwind@unibas.ch</a>> wrote:<br> >>><br> >>> Hi Jenny,<br> >>><br> >>> Thanks for the explanations..<br> >>><br> >>> Please find vm.conf attached, it looks like the ovirtmgmt network is<br> >>> defined<br> >>><br> >>> Regards,<br> >>> Arsène<br> >>><br> >>><br> >>> On 06/19/2017 01:46 PM, Evgenia Tokar wrote:<br> >>><br> >>> Hi,<br> >>><br> >>> It should be in one of the directories on your storage domain:<br> >>> ..../cd1f6775-61e9-4d04-b41c-<wbr>c64925d5a905/images/<imageId>/<wbr><volumeId><br> >>><br> >>> To see which one you can run the following command:<br> >>><br> >>> vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId><br> >>> storagedomainID=<<wbr>storageDomainId> storagepoolID=<storagePoolId><br> >>><br> >>> the storage domain id is: cd1f6775-61e9-4d04-b41c-<wbr>c64925d5a905<br> >>> the storage pool id can be found using: vdsm-client StorageDomain getInfo<br> >>> storagedomainID=cd1f6775-61e9-<wbr>4d04-b41c-c64925d5a905<br> >>><br> >>> The volume that has "description": "<wbr>HostedEngineConfigurationImage<wbr>" is<br> >>> the one you are looking for.<br> >>> Untar it and it should contain the original vm.conf which was used to<br> >>> start the hosted engine.<br> >>><br> >>> Jenny Tokar<br> >>><br> >>><br> >>> On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind<br> >>> <<a href="mailto:arsene.gschwind@unibas.ch" moz-do-not-send="true">arsene.gschwind@unibas.ch</a>> wrote:<br> >>>><br> >>>> Hi Jenny,<br> >>>><br> >>>> 1. I couldn't locate any tar file containing vm.conf, do you know the<br> >>>> exact place where it is stored?<br> >>>><br> >>>> 2. The ovirtmgmt appears in the network dropdown but I'm not able to<br> >>>> change since it complains about locked values.<br> >>>><br> >>>> Thanks a lot for your help.<br> >>>><br> >>>> Regards,<br> >>>> Arsène<br> >>>><br> >>>><br> >>>><br> >>>> On 06/14/2017 01:26 PM, Evgenia Tokar wrote:<br> >>>><br> >>>> Hi Arseny,<br> >>>><br> >>>> Looking at the log the ovf doesn't contain the ovirtmgmt network.<br> >>>><br> >>>> 1. Can you provide the original vm.conf file the engine was started<br> >>>> with? It is located in a tar archive on your storage domain.<br> >>>> 2. It's uncelar from the screenshot, in the network dropdown do you have<br> >>>> an option to add a ovirtmgmt network?<br> >>>><br> >>>> Thanks,<br> >>>> Jenny<br> >>>><br> >>>><br> >>>> On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind<br> >>>> <<a href="mailto:arsene.gschwind@unibas.ch" moz-do-not-send="true">arsene.gschwind@unibas.ch</a>> wrote:<br> >>>>><br> >>>>> Sorry for that, I haven't checked.<br> >>>>><br> >>>>> I've replaced the log file with a new version which should work i hope.<br> >>>>><br> >>>>> Many Thanks.<br> >>>>><br> >>>>> Regards,<br> >>>>> Arsène<br> >>>>><br> >>>>><br> >>>>> On 06/12/2017 02:33 PM, Martin Sivak wrote:<br> >>>>><br> >>>>> I am sorry to say so, but it seems the log archive is corrupted. I<br> >>>>> can't open it.<br> >>>>><br> >>>>> Regards<br> >>>>><br> >>>>> Martin Sivak<br> >>>>><br> >>>>> On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind<br> >>>>> <<a href="mailto:arsene.gschwind@unibas.ch" moz-do-not-send="true">arsene.gschwind@unibas.ch</a>> wrote:<br> >>>>><br> >>>>> Please find the logs here:<br> >>>>><br> >>>>> <a href="https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0" rel="noreferrer" target="_blank" moz-do-not-send="true">https://www.dropbox.com/sh/<wbr>k2zk7ig4tbd9tnj/<wbr>AAB2NKjVk2z6lVPQ15NIeAtCa?dl=0</a><br> >>>>><br> >>>>> Thanks.<br> >>>>><br> >>>>> Regards,<br> >>>>> Arsène<br> >>>>><br> >>>>> Hi,<br> >>>>><br> >>>>> Sorry for this, it seems that the attachment have been detached.<br> >>>>><br> >>>>> So let's try again<br> >>>>><br> >>>>> Regards,<br> >>>>> Arsène<br> >>>>><br> >>>>><br> >>>>> On 06/12/2017 11:59 AM, Martin Sivak wrote:<br> >>>>><br> >>>>> Hi,<br> >>>>><br> >>>>> I would love to help you, but I didn't get the log file..<br> >>>>><br> >>>>> Regards<br> >>>>><br> >>>>> Martin Sivak<br> >>>>><br> >>>>> On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind<br> >>>>> <<a href="mailto:arsene.gschwind@unibas.ch" moz-do-not-send="true">arsene.gschwind@unibas.ch</a>> wrote:<br> >>>>><br> >>>>> Hi all,<br> >>>>><br> >>>>> Any chance to get help or a hint to solve my Problem, I have no idea<br> >>>>> how to<br> >>>>> change this configuration since it is not possible using the WebUI.<br> >>>>><br> >>>>> Thanks a lot.<br> >>>>><br> >>>>> Regards,<br> >>>>> Arsène<br> >>>>><br> >>>>><br> >>>>> On 06/07/2017 11:50 AM, Arsène Gschwind wrote:<br> >>>>><br> >>>>> Hi all,<br> >>>>><br> >>>>> Please find attached the agent.log DEBUG and a screenshot from webui<br> >>>>><br> >>>>> Thanks a lot<br> >>>>><br> >>>>> Best regards,<br> >>>>><br> >>>>> Arsène<br> >>>>><br> >>>>><br> >>>>> On 06/07/2017 11:27 AM, Martin Sivak wrote:<br> >>>>><br> >>>>> Hi all,<br> >>>>><br> >>>>> Yanir is right, the local vm.conf is just a cache of what was<br> >>>>> retrieved from the engine.<br> >>>>><br> >>>>> I might be interesting to check what the configuration of the engine<br> >>>>> VM shows when edited using the webadmin. Or enable debug logging [1]<br> >>>>> for hosted engine and add the OVF dump we send there now and then (the<br> >>>>> xml representation of the VM).<br> >>>>><br> >>>>> [1] See /etc/ovirt-hosted-engine-ha/<wbr>agent-log.conf and change the<br> >>>>> level for root logger to DEBUG<br> >>>>><br> >>>>> Best regards<br> >>>>><br> >>>>> Martin Sivak<br> >>>>><br> >>>>> On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <<a href="mailto:yquinn@redhat.com" moz-do-not-send="true">yquinn@redhat.com</a>> wrote:<br> >>>>><br> >>>>> If im not mistaken the values of vm.conf are repopulated from the<br> >>>>> database ,<br> >>>>> but i wouldn't recommend meddling with DB data.<br> >>>>> maybe the network device wasn't set properly during the hosted engine<br> >>>>> setup<br> >>>>> ?<br> >>>>><br> >>>>> On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind<br> >>>>> <<a href="mailto:arsene.gschwind@unibas.ch" moz-do-not-send="true">arsene.gschwind@unibas.ch</a>><br> >>>>> wrote:<br> >>>>><br> >>>>> Hi,<br> >>>>><br> >>>>> Any chance to get a hint how to change the vm.conf file so it will not<br> >>>>> be<br> >>>>> overwritten constantly?<br> >>>>><br> >>>>> Thanks a lot.<br> >>>>><br> >>>>> Arsène<br> >>>>><br> >>>>><br> >>>>> On 06/06/2017 09:50 AM, Arsène Gschwind wrote:<br> >>>>><br> >>>>> Hi,<br> >>>>><br> >>>>> I've migrated our oVirt engine to hosted-engine located on a FC storage<br> >>>>> LUN, so far so good.<br> >>>>> For some reason I'm not able to start the hosted-engine VM, after<br> >>>>> digging<br> >>>>> in the log files i could figured out the reason. The Network device was<br> >>>>> set<br> >>>>> to "None" as follow:<br> >>>>><br> >>>>><br> >>>>> devices={nicModel:pv,macAddr:<wbr>00:16:3e:3a:6b:60,linkActive:<wbr>true,network:None,deviceId:<wbr>56cb4d71-13ff-42a8-bb83-<wbr>7faef99fd3ea,address:{slot:<wbr>0x03,bus:0x00,domain:0x0000,<wbr>type:pci,function:0x0},device:<wbr>bridge,type:interface}<br> >>>>><br> >>>>> I've created a new config file<br> >>>>> /var/run/ovirt-hosted-engine-<wbr>ha/vm.conf.new<br> >>>>> and set the nic device to ovirtmgnt, the I could start the<br> >>>>> hosted-engine<br> >>>>> using :<br> >>>>> hosted-engine --vm-start<br> >>>>> --vm-conf=var/run/ovirt-<wbr>hosted-engine-ha/vm.conf.new<br> >>>>><br> >>>>> The nic device line in vm.conf.new looks like:<br> >>>>><br> >>>>><br> >>>>> devices={nicModel:pv,macAddr:<wbr>00:16:3e:3a:6b:60,linkActive:<wbr>true,network:ovirtmgmt,<wbr>deviceId:56cb4d71-13ff-42a8-<wbr>bb83-7faef99fd3ea,address:{<wbr>slot:0x03,bus:0x00,domain:<wbr>0x0000,type:pci,function:0x0},<wbr>device:bridge,type:interface}<br> >>>>><br> >>>>> I tried to find out a way to change this setting on vm.conf but it is<br> >>>>> constantly rewritten, even when using the webui is say's:<br> >>>>> HostedEngine:<br> >>>>><br> >>>>> There was an attempt to change Hosted Engine VM values that are locked.<br> >>>>><br> >>>>> Is there a way to modify/correct the hosted-engine vm.conf file so it<br> >>>>> will<br> >>>>> stay and not be overwritten?<br> >>>>><br> >>>>> Thanks a lot for any hint/help<br> >>>>><br> >>>>> rgds,<br> >>>>> arsène<br> >>>>><br> >>>>> --<br> >>>>><br> >>>>> Arsène Gschwind<br> >>>>> Fa. Sapify AG im Auftrag der Universität Basel<br> >>>>> IT Services<br> >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >>>>> Tel. +41 79 449 25 63 | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >>>>> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:%2B41%2061%20267%2014%2011" value="+41612671411" moz-do-not-send="true">+41 61 267 14 11</a><br> >>>>><br> >>>>><br> >>>>><br> >>>>> ______________________________<wbr>_________________<br> >>>>> Users mailing list<br> >>>>> <a href="mailto:Users@ovirt.org" moz-do-not-send="true">Users@ovirt.org</a><br> >>>>> <a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a><br> >>>>><br> >>>>><br> >>>>> --<br> >>>>><br> >>>>> Arsène Gschwind<br> >>>>> Fa. Sapify AG im Auftrag der Universität Basel<br> >>>>> IT Services<br> >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >>>>> Tel. <a href="tel:%2B41%2079%20449%2025%2063" value="+41794492563" moz-do-not-send="true">+41 79 449 25 63</a> | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >>>>> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:%2B41%2061%20267%2014%2011" value="+41612671411" moz-do-not-send="true">+41 61 267 14 11</a><br> >>>>><br> >>>>><br> >>>>> ______________________________<wbr>_________________<br> >>>>> Users mailing list<br> >>>>> <a href="mailto:Users@ovirt.org" moz-do-not-send="true">Users@ovirt.org</a><br> >>>>> <a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a><br> >>>>><br> >>>>> ______________________________<wbr>_________________<br> >>>>> Users mailing list<br> >>>>> <a href="mailto:Users@ovirt.org" moz-do-not-send="true">Users@ovirt.org</a><br> >>>>> <a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a><br> >>>>><br> >>>>><br> >>>>> --<br> >>>>><br> >>>>> Arsène Gschwind<br> >>>>> Fa. Sapify AG im Auftrag der Universität Basel<br> >>>>> IT Services<br> >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >>>>> Tel. <a href="tel:%2B41%2079%20449%2025%2063" value="+41794492563" moz-do-not-send="true">+41 79 449 25 63</a> | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >>>>> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:%2B41%2061%20267%2014%2011" value="+41612671411" moz-do-not-send="true">+41 61 267 14 11</a><br> >>>>><br> >>>>><br> >>>>><br> >>>>> ______________________________<wbr>_________________<br> >>>>> Users mailing list<br> >>>>> <a href="mailto:Users@ovirt.org" moz-do-not-send="true">Users@ovirt.org</a><br> >>>>> <a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a><br> >>>>><br> >>>>><br> >>>>> --<br> >>>>><br> >>>>> Arsène Gschwind<br> >>>>> Fa. Sapify AG im Auftrag der Universität Basel<br> >>>>> IT Services<br> >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >>>>> Tel. <a href="tel:%2B41%2079%20449%2025%2063" value="+41794492563" moz-do-not-send="true">+41 79 449 25 63</a> | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >>>>> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:%2B41%2061%20267%2014%2011" value="+41612671411" moz-do-not-send="true">+41 61 267 14 11</a><br> >>>>><br> >>>>><br> >>>>> ______________________________<wbr>_________________<br> >>>>> Users mailing list<br> >>>>> <a href="mailto:Users@ovirt.org" moz-do-not-send="true">Users@ovirt.org</a><br> >>>>> <a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a><br> >>>>><br> >>>>><br> >>>>> --<br> >>>>><br> >>>>> Arsène Gschwind<br> >>>>> Fa. Sapify AG im Auftrag der Universität Basel<br> >>>>> IT Services<br> >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >>>>> Tel. <a href="tel:%2B41%2079%20449%2025%2063" value="+41794492563" moz-do-not-send="true">+41 79 449 25 63</a> | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >>>>> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:%2B41%2061%20267%2014%2011" value="+41612671411" moz-do-not-send="true">+41 61 267 14 11</a><br> >>>>><br> >>>>><br> >>>>> --<br> >>>>><br> >>>>> Arsène Gschwind<br> >>>>> Fa. Sapify AG im Auftrag der Universität Basel<br> >>>>> IT Services<br> >>>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >>>>> Tel. <a href="tel:%2B41%2079%20449%2025%2063" value="+41794492563" moz-do-not-send="true">+41 79 449 25 63</a> | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >>>>> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | <a href="tel:%2B41%2061%20267%2014%2011" value="+41612671411" moz-do-not-send="true">+41 61 267 14 11</a><br> >>>>><br> >>>>><br> >>>>> ______________________________<wbr>_________________<br> >>>>> Users mailing list<br> >>>>> <a href="mailto:Users@ovirt.org" moz-do-not-send="true">Users@ovirt.org</a><br> >>>>> <a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a><br> >>>>><br> >>>><br> >>>><br> >>>> --<br> >>>><br> >>>> Arsène Gschwind<br> >>>> Fa. Sapify AG im Auftrag der Universität Basel<br> >>>> IT Services<br> >>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >>>> Tel. <a href="tel:%2B41%2079%20449%2025%2063" value="+41794492563" moz-do-not-send="true">+41 79 449 25 63</a> | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >>>> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | +41 61 267 14 11<br> >>><br> >>><br> >>><br> >>> --<br> >>><br> >>> Arsène Gschwind<br> >>> Fa. Sapify AG im Auftrag der Universität Basel<br> >>> IT Services<br> >>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >>> Tel. +41 79 449 25 63 | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >>> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | +41 61 267 14 11<br> >>><br> >>><br> >>> ______________________________<wbr>_________________<br> >>> Users mailing list<br> >>> <a href="mailto:Users@ovirt.org" moz-do-not-send="true">Users@ovirt.org</a><br> >>> <a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a><br> >>><br> >><br> >><br> >> --<br> >><br> >> Arsène Gschwind<br> >> Fa. Sapify AG im Auftrag der Universität Basel<br> >> IT Services<br> >> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> >> Tel. +41 79 449 25 63 | <a href="http://its.unibas.ch" rel="noreferrer" target="_blank" moz-do-not-send="true">http://its.unibas.ch</a><br> >> ITS-ServiceDesk: <a href="mailto:support-its@unibas.ch" moz-do-not-send="true">support-its@unibas.ch</a> | +41 61 267 14 11<br> ><br> ><br> <br> <br> <br> </div> </div> <span class="HOEnZb"><font color="#888888">--<br> Didi<br> </font></span></blockquote> </div> <br> </div> </blockquote> <br> <div class="moz-signature">-- <br> <p class="western" style="margin-bottom: 0in; line-height: 150%"> <font color="#000000"><font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> <b>Arsène Gschwind</b> </font> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> </font> </font> </font> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> </font> </font> <font face="Tahoma, serif"> </font> <font color="#000000"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> <br> </font> </font> </font> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> Fa. Sapify AG im Auftrag der Universität Basel<br> IT Services<br> Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br> Tel. +41 79 449 25 63 | </font> </font> </font> <a href="http://its.unibas.ch/"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> http://its.unibas.ch </font> </font> </a><br> <font color="#7f7f7f"> <font face="Tahoma, serif"> <font style="font-size: 8pt" size="1"> ITS-ServiceDesk: <a class="moz-txt-link-abbreviated" href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61 267 14 11 </font> </font> </font> </font></p> <font color="#000000"> </font></div> </body> </html> --------------B6D4EB7978E5A3B037777BC9--

Yes, you can try that. On Tue, Jun 27, 2017 at 5:03 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Would re-deploying the hosted-engine and restoring the backup be an option?
Thanks a lot for your help
Rgds, Arsène
On 06/27/2017 03:15 PM, Evgenia Tokar wrote:
The set-shared-config does not allow editing of the vm.conf or the ovf.
The original vm.conf that the hosted engine vm was started with contains the correct network, so it must have been removed at a later stage.
To get a working environment I don't see another option then fixing the network in the db. What do the following queries return: 1. select vm_interface.vm_guid, vnic_profile_id from vm_interface, vm_static where vm_name='HostedEngine'; 2. select id from vnic_profiles where name='ovirtmgmt'; The vnic profile id that is returned from the first query should be the same as the one that has the ovirtmgmt name in the second query.
Thanks, Jenny
Jenny Tokar
On Thu, Jun 22, 2017 at 2:53 PM, Yedidyah Bar David <didi@redhat.com> wrote:
Adding Didi, Didi, do you happen to know of scenarios where we use the migration
On Thu, Jun 22, 2017 at 2:32 PM, Yanir Quinn <yquinn@redhat.com> wrote: scripts
and the nic in the OVF is gone missing ? (maybe after the restore stage)
I do not think I understand the question.
Migration from standalone to hosted-engine does not involve a nic in an ovf, AFAIU.
To get/set stuff on the shared storage, hosted-engine has options '--{get,set}-shared-config', see also:
https://bugzilla.redhat.com/show_bug.cgi?id=1301681
For the engine vm.conf, indeed it's updated from data in the engine db, but I do not know well the details. Adding Simone.
Regards, Yanir
On Wed, Jun 21, 2017 at 12:02 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Yanir,
We had our oVirt Engine running on a HW server so we decided to move
it to
hosted-engine. For this I've followed the Howto at http://www.ovirt.org/documentation/self-hosted/chap- Migrating_from_Bare_Metal_to_an_EL-Based_Self-Hosted_Environment/.
The Hosted-Storage is located on a FC SAN LUN.
Please find attached the setup log.
Tanks a lot.
Regards, Arsène
On 06/21/2017 10:14 AM, Yanir Quinn wrote:
HI Arsene
Just to be clear, can you write down the steps to reproduce ? (the migration procedure . and if possible the state before and after)
Thanks
On Mon, Jun 19, 2017 at 8:34 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
Thanks for the explanations..
Please find vm.conf attached, it looks like the ovirtmgmt network is defined
Regards, Arsène
On 06/19/2017 01:46 PM, Evgenia Tokar wrote:
Hi,
It should be in one of the directories on your storage domain: ..../cd1f6775-61e9-4d04-b41c-c64925d5a905/images/<imageId>/<volumeId>
To see which one you can run the following command:
vdsm-client Volume getInfo volumeID=<volumeId> imageID=<imageId> storagedomainID=<storageDomainId> storagepoolID=<storagePoolId>
the storage domain id is: cd1f6775-61e9-4d04-b41c-c64925d5a905 the storage pool id can be found using: vdsm-client StorageDomain
getInfo
storagedomainID=cd1f6775-61e9-4d04-b41c-c64925d5a905
The volume that has "description": "HostedEngineConfigurationImage" is the one you are looking for. Untar it and it should contain the original vm.conf which was used to start the hosted engine.
Jenny Tokar
On Mon, Jun 19, 2017 at 12:59 PM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote:
Hi Jenny,
1. I couldn't locate any tar file containing vm.conf, do you know the exact place where it is stored?
2. The ovirtmgmt appears in the network dropdown but I'm not able to change since it complains about locked values.
Thanks a lot for your help.
Regards, Arsène
On 06/14/2017 01:26 PM, Evgenia Tokar wrote:
Hi Arseny,
Looking at the log the ovf doesn't contain the ovirtmgmt network.
1. Can you provide the original vm.conf file the engine was started with? It is located in a tar archive on your storage domain. 2. It's uncelar from the screenshot, in the network dropdown do you
have
an option to add a ovirtmgmt network?
Thanks, Jenny
On Tue, Jun 13, 2017 at 11:19 AM, Arsène Gschwind <arsene.gschwind@unibas.ch> wrote: > > Sorry for that, I haven't checked. > > I've replaced the log file with a new version which should work i hope. > > Many Thanks. > > Regards, > Arsène > > > On 06/12/2017 02:33 PM, Martin Sivak wrote: > > I am sorry to say so, but it seems the log archive is corrupted. I > can't open it. > > Regards > > Martin Sivak > > On Mon, Jun 12, 2017 at 12:47 PM, Arsène Gschwind > <arsene.gschwind@unibas.ch> wrote: > > Please find the logs here: > > https://www.dropbox.com/sh/k2zk7ig4tbd9tnj/AAB2NKjVk2z6lVPQ1 5NIeAtCa?dl=0 > > Thanks. > > Regards, > Arsène > > Hi, > > Sorry for this, it seems that the attachment have been detached. > > So let's try again > > Regards, > Arsène > > > On 06/12/2017 11:59 AM, Martin Sivak wrote: > > Hi, > > I would love to help you, but I didn't get the log file.. > > Regards > > Martin Sivak > > On Mon, Jun 12, 2017 at 11:49 AM, Arsène Gschwind > <arsene.gschwind@unibas.ch> wrote: > > Hi all, > > Any chance to get help or a hint to solve my Problem, I have no idea > how to > change this configuration since it is not possible using the WebUI. > > Thanks a lot. > > Regards, > Arsène > > > On 06/07/2017 11:50 AM, Arsène Gschwind wrote: > > Hi all, > > Please find attached the agent.log DEBUG and a screenshot from webui > > Thanks a lot > > Best regards, > > Arsène > > > On 06/07/2017 11:27 AM, Martin Sivak wrote: > > Hi all, > > Yanir is right, the local vm.conf is just a cache of what was > retrieved from the engine. > > I might be interesting to check what the configuration of the engine > VM shows when edited using the webadmin. Or enable debug logging [1] > for hosted engine and add the OVF dump we send there now and then (the > xml representation of the VM). > > [1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the > level for root logger to DEBUG > > Best regards > > Martin Sivak > > On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn@redhat.com> wrote: > > If im not mistaken the values of vm.conf are repopulated from the > database , > but i wouldn't recommend meddling with DB data. > maybe the network device wasn't set properly during the hosted engine > setup > ? > > On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind > <arsene.gschwind@unibas.ch> > wrote: > > Hi, > > Any chance to get a hint how to change the vm.conf file so it will not > be > overwritten constantly? > > Thanks a lot. > > Arsène > > > On 06/06/2017 09:50 AM, Arsène Gschwind wrote: > > Hi, > > I've migrated our oVirt engine to hosted-engine located on a FC storage > LUN, so far so good. > For some reason I'm not able to start the hosted-engine VM, after > digging > in the log files i could figured out the reason. The Network device was > set > to "None" as follow: > > > devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:tr ue,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3e a,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci, function:0x0},device:bridge,type:interface} > > I've created a new config file > /var/run/ovirt-hosted-engine-ha/vm.conf.new > and set the nic device to ovirtmgnt, the I could start the > hosted-engine > using : > hosted-engine --vm-start > --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new > > The nic device line in vm.conf.new looks like: > > > devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:tr ue,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83- 7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000, type:pci,function:0x0},device:bridge,type:interface} > > I tried to find out a way to change this setting on vm.conf but it is > constantly rewritten, even when using the webui is say's: > HostedEngine: > > There was an attempt to change Hosted Engine VM values that are locked. > > Is there a way to modify/correct the hosted-engine vm.conf file so it > will > stay and not be overwritten? > > Thanks a lot for any hint/help > > rgds, > arsène > > -- > > Arsène Gschwind > Fa. Sapify AG im Auftrag der Universität Basel > IT Services > Klingelbergstr. 70 | CH-4056 Basel | Switzerland > Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch > ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <%2B41%2061%20267%2014%2011> > > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -- > > Arsène Gschwind > Fa. Sapify AG im Auftrag der Universität Basel > IT Services > Klingelbergstr. 70 | CH-4056 Basel | Switzerland > Tel. +41 79 449 25 63 <%2B41%2079%20449%2025%2063> | http://its.unibas.ch > ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <%2B41%2061%20267%2014%2011> > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -- > > Arsène Gschwind > Fa. Sapify AG im Auftrag der Universität Basel > IT Services > Klingelbergstr. 70 | CH-4056 Basel | Switzerland > Tel. +41 79 449 25 63 <%2B41%2079%20449%2025%2063> | http://its.unibas.ch > ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <%2B41%2061%20267%2014%2011> > > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -- > > Arsène Gschwind > Fa. Sapify AG im Auftrag der Universität Basel > IT Services > Klingelbergstr. 70 | CH-4056 Basel | Switzerland > Tel. +41 79 449 25 63 <%2B41%2079%20449%2025%2063> | http://its.unibas.ch > ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <%2B41%2061%20267%2014%2011> > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > -- > > Arsène Gschwind > Fa. Sapify AG im Auftrag der Universität Basel > IT Services > Klingelbergstr. 70 | CH-4056 Basel | Switzerland > Tel. +41 79 449 25 63 <%2B41%2079%20449%2025%2063> | http://its.unibas.ch > ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <%2B41%2061%20267%2014%2011> > > > -- > > Arsène Gschwind > Fa. Sapify AG im Auftrag der Universität Basel > IT Services > Klingelbergstr. 70 | CH-4056 Basel | Switzerland > Tel. +41 79 449 25 63 <%2B41%2079%20449%2025%2063> | http://its.unibas.ch > ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <%2B41%2061%20267%2014%2011> > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <%2B41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Arsène Gschwind Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11
-- Didi
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch ITS-ServiceDesk: support-its@unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
participants (5)
-
Arsène Gschwind
-
Evgenia Tokar
-
Martin Sivak
-
Yanir Quinn
-
Yedidyah Bar David