6:22 p.m.
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a
dead lnk in the documentation for the kernel boot parameter section of
creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
Anyone know where this went or can help me with the options?
Shareef.
8:05 p.m.
On April 16, 2020 6:22:35 PM GMT+03:00, Shareef Jalloq <shareef(a)jalloq.co.uk>
wrote:
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is
a
dead lnk in the documentation for the kernel boot parameter section of
creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
Anyone know where this went or can help me with the options?
Shareef.
In order to change a kernel parameter - set the host into maintenance -> edit the
host -> kernel -> put ticks where necessary or type your kernel parameter and
save.
Next use the 'Installation' dropdown and select reinstall.
Once it's over - reboot the host from UI.
At least this is the way I have enabled nested virtualization.
Best Regards,
Strahil Nikolov
8:22 p.m.
Thanks. The Installation->Reinstall was something I missed but that
doesn't seem to have helped. The host info still says that 'Device
Passthrough' is Disabled. I'm sure I enabled everything I needed to in the
BIOS but will have to double check. This is an old motherboard without
IPMI though. Meh.
On Thu, Apr 16, 2020 at 6:04 PM Strahil Nikolov <hunter86_bg(a)yahoo.com>
wrote:
On April 16, 2020 6:22:35 PM GMT+03:00, Shareef Jalloq <
shareef(a)jalloq.co.uk> wrote:
>Hi,
>
>I'm trying to set up one of our nodes with PCI passthrough but there is
>a
>dead lnk in the documentation for the kernel boot parameter section of
>creating a new host.
>
>
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
>
>Anyone know where this went or can help me with the options?
>
>Shareef.
In order to change a kernel parameter - set the host into maintenance ->
edit the host -> kernel -> put ticks where necessary or type your kernel
parameter and save.
Next use the 'Installation' dropdown and select reinstall.
Once it's over - reboot the host from UI.
At least this is the way I have enabled nested virtualization.
Best Regards,
Strahil Nikolov
8:44 p.m.
Under the vm advanced options, under host. You chose a specific host then allow
passthrough or pinning.
Eric Evans
Digital Data Services LLC.
304.660.9080
From: Shareef Jalloq <shareef(a)jalloq.co.uk>
Sent: Thursday, April 16, 2020 1:22 PM
To: Strahil Nikolov <hunter86_bg(a)yahoo.com>
Cc: Ovirt Users <users(a)ovirt.org>
Subject: [ovirt-users] Re: Broken doco link for New Host->Kernel boot parameters
Thanks. The Installation->Reinstall was something I missed but that doesn't seem
to have helped. The host info still says that 'Device Passthrough' is Disabled.
I'm sure I enabled everything I needed to in the BIOS but will have to double check.
This is an old motherboard without IPMI though. Meh.
On Thu, Apr 16, 2020 at 6:04 PM Strahil Nikolov <hunter86_bg(a)yahoo.com
<mailto:hunter86_bg@yahoo.com> > wrote:
On April 16, 2020 6:22:35 PM GMT+03:00, Shareef Jalloq <shareef(a)jalloq.co.uk
<mailto:shareef@jalloq.co.uk> > wrote:
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is
a
dead lnk in the documentation for the kernel boot parameter section of
creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
Anyone know where this went or can help me with the options?
Shareef.
In order to change a kernel parameter - set the host into maintenance -> edit the
host -> kernel -> put ticks where necessary or type your kernel parameter and
save.
Next use the 'Installation' dropdown and select reinstall.
Once it's over - reboot the host from UI.
At least this is the way I have enabled nested virtualization.
Best Regards,
Strahil Nikolov
8:18 p.m.
There are lots of dead links in older docs. Look at the 4.4 docs for updated info.
Eric Evans
Digital Data Services LLC.
304.660.9080
From: Shareef Jalloq <shareef(a)jalloq.co.uk>
Sent: Thursday, April 16, 2020 11:23 AM
To: Ovirt Users <users(a)ovirt.org>
Subject: [ovirt-users] Broken doco link for New Host->Kernel boot parameters
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in
the documentation for the kernel boot parameter section of creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
Anyone know where this went or can help me with the options?
Shareef.
8:20 p.m.
You mean somewhere other than https://www.ovirt.org/documentation/?
On Thu, Apr 16, 2020 at 6:18 PM <eevans(a)digitaldatatechs.com> wrote:
There are lots of dead links in older docs. Look at the 4.4 docs for
updated info.
Eric Evans
Digital Data Services LLC.
304.660.9080
*From:* Shareef Jalloq <shareef(a)jalloq.co.uk>
*Sent:* Thursday, April 16, 2020 11:23 AM
*To:* Ovirt Users <users(a)ovirt.org>
*Subject:* [ovirt-users] Broken doco link for New Host->Kernel boot
parameters
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a
dead lnk in the documentation for the kernel boot parameter section of
creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
Anyone know where this went or can help me with the options?
Shareef.
8:22 p.m.
That’s the one. If there’s a dead link here, it needs reported.
Eric Evans
Digital Data Services LLC.
304.660.9080
From: Shareef Jalloq <shareef(a)jalloq.co.uk>
Sent: Thursday, April 16, 2020 1:21 PM
To: eevans(a)digitaldatatechs.com
Cc: Ovirt Users <users(a)ovirt.org>
Subject: Re: [ovirt-users] Broken doco link for New Host->Kernel boot parameters
You mean somewhere other than https://www.ovirt.org/documentation/?
On Thu, Apr 16, 2020 at 6:18 PM <eevans(a)digitaldatatechs.com
<mailto:eevans@digitaldatatechs.com> > wrote:
There are lots of dead links in older docs. Look at the 4.4 docs for updated info.
Eric Evans
Digital Data Services LLC.
304.660.9080
From: Shareef Jalloq <shareef(a)jalloq.co.uk <mailto:shareef@jalloq.co.uk> >
Sent: Thursday, April 16, 2020 11:23 AM
To: Ovirt Users <users(a)ovirt.org <mailto:users@ovirt.org> >
Subject: [ovirt-users] Broken doco link for New Host->Kernel boot parameters
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a dead lnk in
the documentation for the kernel boot parameter section of creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
Anyone know where this went or can help me with the options?
Shareef.
8:35 p.m.
Will do.
On Thu, Apr 16, 2020 at 6:23 PM <eevans(a)digitaldatatechs.com> wrote:
That’s the one. If there’s a dead link here, it needs reported.
Eric Evans
Digital Data Services LLC.
304.660.9080
*From:* Shareef Jalloq <shareef(a)jalloq.co.uk>
*Sent:* Thursday, April 16, 2020 1:21 PM
*To:* eevans(a)digitaldatatechs.com
*Cc:* Ovirt Users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Broken doco link for New Host->Kernel boot
parameters
You mean somewhere other than https://www.ovirt.org/documentation/?
On Thu, Apr 16, 2020 at 6:18 PM <eevans(a)digitaldatatechs.com> wrote:
There are lots of dead links in older docs. Look at the 4.4 docs for
updated info.
Eric Evans
Digital Data Services LLC.
304.660.9080
*From:* Shareef Jalloq <shareef(a)jalloq.co.uk>
*Sent:* Thursday, April 16, 2020 11:23 AM
*To:* Ovirt Users <users(a)ovirt.org>
*Subject:* [ovirt-users] Broken doco link for New Host->Kernel boot
parameters
Hi,
I'm trying to set up one of our nodes with PCI passthrough but there is a
dead lnk in the documentation for the kernel boot parameter section of
creating a new host.
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
Anyone know where this went or can help me with the options?
Shareef.
8:41 p.m.
Looks like someone has already reported most of the broken links including
this one: https://github.com/oVirt/ovirt-site/issues/1228.
On Thu, Apr 16, 2020 at 6:35 PM Shareef Jalloq <shareef(a)jalloq.co.uk> wrote:
Will do.
On Thu, Apr 16, 2020 at 6:23 PM <eevans(a)digitaldatatechs.com> wrote:
> That’s the one. If there’s a dead link here, it needs reported.
>
>
>
> Eric Evans
>
> Digital Data Services LLC.
>
> 304.660.9080
>
>
>
> *From:* Shareef Jalloq <shareef(a)jalloq.co.uk>
> *Sent:* Thursday, April 16, 2020 1:21 PM
> *To:* eevans(a)digitaldatatechs.com
> *Cc:* Ovirt Users <users(a)ovirt.org>
> *Subject:* Re: [ovirt-users] Broken doco link for New Host->Kernel boot
> parameters
>
>
>
> You mean somewhere other than https://www.ovirt.org/documentation/?
>
>
>
> On Thu, Apr 16, 2020 at 6:18 PM <eevans(a)digitaldatatechs.com> wrote:
>
> There are lots of dead links in older docs. Look at the 4.4 docs for
> updated info.
>
>
>
> Eric Evans
>
> Digital Data Services LLC.
>
> 304.660.9080
>
>
>
> *From:* Shareef Jalloq <shareef(a)jalloq.co.uk>
> *Sent:* Thursday, April 16, 2020 11:23 AM
> *To:* Ovirt Users <users(a)ovirt.org>
> *Subject:* [ovirt-users] Broken doco link for New Host->Kernel boot
> parameters
>
>
>
> Hi,
>
>
>
> I'm trying to set up one of our nodes with PCI passthrough but there is a
> dead lnk in the documentation for the kernel boot parameter section of
> creating a new host.
>
>
>
>
>
https://www.ovirt.org/documentation/admin-guide/sect-Explanation_of_Setti...
>
>
>
> Anyone know where this went or can help me with the options?
>
>
>
> Shareef.
>
>
>
>
>
>
1680
days inactive
1680
days old
8 comments
3 participants
participants (3)
-
eevans＠digitaldatatechs.com -
Shareef Jalloq -
Strahil Nikolov