[Users] Ovirt Host (3.0) compatability issue with Cluster (3.1)

Hello All, I am new to Ovirt and trying to Implement Ovirt in my organisation with an view to implement complete open source virtualization solution instead of using VMware or other Paid once. I have installed ovirt-engine on Fedora 17 and have installed Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2 (20120510.0.el6_2) Post installation engine started fine but while trying to add host its giving me error as below. Host host1 is compatible with versions (3.0) and cannot join Cluster Default which is set to version 3.1. I don't know what exact details I would need to share for troubleshooting. Hence I have attached a file with details of rpms installed on ovirt-engine and node. ( One may not like to scroll the entire file) I might be missing something very silly or I may sound too stupid. Ovirt masters : Please guide. Thanks in advance, Keyur

On 11/09/2012 11:50 AM, Keyur Makwana wrote:
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation with an view to implement complete open source virtualization solution instead of using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2 (20120510.0.el6_2)
Post installation engine started fine but while trying to add host its giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster Default which is set to version 3.1.
you are using a RHEV-H host with an ovirt node. 1. this is not intended to be a supported combination. ovirt and rhev compatibility versions (while similar in naming) are different. 2. the RHEV-H you are using supports 3.0 only, you need to change the cluster level to 3.0 (but again, this is not a supported combination and behavior will be unexpected). 3. i recommend you try to use an ovirt based host (fedora or .el6 one).
I don't know what exact details I would need to share for troubleshooting. Hence I have attached a file with details of rpms installed on ovirt-engine and node. ( One may not like to scroll the entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance, Keyur
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

------=_Part_29688851_689950810.1352469990533 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit For troubleshooting - Can you run on your host machine vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps) and send us the results? ----- Original Message -----
From: "Keyur Makwana" <kurmakwana@gmail.com> To: users@ovirt.org Sent: Friday, November 9, 2012 12:50:22 PM Subject: [Users] Ovirt Host (3.0) compatability issue with Cluster (3.1)
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation with an view to implement complete open source virtualization solution instead of using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2 (20120510.0.el6_2)
Post installation engine started fine but while trying to add host its giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster Default which is set to version 3.1.
I don't know what exact details I would need to share for troubleshooting. Hence I have attached a file with details of rpms installed on ovirt-engine and node. ( One may not like to scroll the entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance, Keyur
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
------=_Part_29688851_689950810.1352469990533 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: times new roman,new york,times,serif; font-size: = 12pt; color: #000000'>For troubleshooting -<br>Can you run on your host mac= hine<br><br>vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)<br>= <br>and send us the results?<br><br><br><hr id=3D"zwchr"><blockquote style= =3D"border-left:2px solid rgb(16, 16, 255);margin-left:5px;padding-left:5px= ;color:#000;font-weight:normal;font-style:normal;text-decoration:none;font-= family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From: </b>"Keyur Makw= ana" <kurmakwana@gmail.com><br><b>To: </b>users@ovirt.org<br><b>Sent:= </b>Friday, November 9, 2012 12:50:22 PM<br><b>Subject: </b>[Users] Ovirt = Host (3.0) compatability issue with Cluster (3.1)<br><br>Hello All,<div><br=
</div><div>I am new to Ovirt and trying to Implement Ovirt in my organisat= ion with an view to implement complete open source virtualization solution = instead of using VMware or other Paid once.</div><div>
<br></div><div>I have installed ovirt-engine on Fedora 17 and have installe= d Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization Hypervis= or release 6.2 (20120510.0.el6_2)</div><div><br></div><div><br></div><div>P= ost installation engine started fine but while trying to add host its givin= g me error as below.</div> <div><br></div><div>Host host1 is compatible with versions (3.0) and cannot= join Cluster Default which is set to version 3.1.<br></div><div><br></div>= <div>I don't know what exact details I would need to share for troubleshoot= ing. Hence I have attached a file with details of rpms installed on ovirt-e= ngine and node. ( One may not like to scroll the entire file)<br> </div><div><br></div><div>I might be missing something very silly or I may = sound too stupid. <br></div><div><br></div><div>Ovirt masters : Please= guide.<br></div><div><br></div><div>Thanks in advance,</div><div>Keyur</di= v> <div><br></div> <br>_______________________________________________<br>Users mailing list<b= r>Users@ovirt.org<br>http://lists.ovirt.org/mailman/listinfo/users<br></blo= ckquote><br></div></body></html> ------=_Part_29688851_689950810.1352469990533--

Hello, Thanks for having a look at this issue. On ovirt-engine - either of the command did not work. Here is the output from the hypervisor. [root@h1 ~]# vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:5e25411e9039'}], 'FC': [{'wwpn': '10000000c9cb2826', 'wwnn': '20000000c9cb2826', 'model': 'LPe1205-CIOv - Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn': '10000000c9cb2827', 'wwnn': '20000000c9cb2827', 'model': 'LPe1205-CIOv - Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}]} ISCSIInitiatorName = iqn.1994-05.com.redhat:5e25411e9039 bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 12 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,arat,epb,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1 cpuModel = Intel(R) Xeon(R) CPU E5645 @ 2.40GHz cpuSockets = 2 cpuSpeed = 2400.276 emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0', 'rhel6.0.0', 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] guestOverhead = 65 hooks = {'before_vm_start': {'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}}, 'after_vm_destroy': {'50_vhostmd': {'md5': '7e7509430304099f38e4a9de966af090'}}, 'before_vm_dehibernate': {'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}}, 'before_vm_migrate_destination': {'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}}} kvmEnabled = true lastClient = 172.29.5.200 lastClientIface = rhevm management_ip = 172.29.81.141 memSize = 64420 networks = {'rhevm': {'addr': '172.29.81.141', 'cfg': {'IPV6FORWARDING': 'no', 'IPV6INIT': 'no', 'SKIPLIBVIRT': 'True', 'IPADDR': '172.29.81.141', 'ONBOOT': 'yes', 'DELAY': '0', 'DEVICE': 'rhevm', 'NETMASK': '255.255.255.0', 'BOOTPROTO': 'static', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'GATEWAY': '172.29.81.1'}, 'ports': ['eth8'], 'netmask': '255.255.255.0', 'stp': 'off', 'gateway': '172.29.81.1'}} nics = {'eth9': {'hwaddr': '5C:F3:FC:98:19:82', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth8': {'hwaddr': '5C:F3:FC:98:19:80', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth7': {'hwaddr': '00:00:C9:D2:16:73', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth6': {'hwaddr': '00:00:C9:D2:16:6F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth5': {'hwaddr': '00:00:C9:D2:16:72', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth4': {'hwaddr': '00:00:C9:D2:16:6E', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth3': {'hwaddr': '00:00:C9:D2:16:71', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:00:C9:D2:16:6D', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:00:C9:D2:16:70', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth0': {'hwaddr': '00:00:C9:D2:16:6C', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '20120510.0.el6_2', 'version': '6.2', 'name': 'RHEV Hypervisor'} packages2 = {'kernel': {'release': '220.17.1.el6.x86_64', 'buildtime': 1335447433.0, 'version': '2.6.32'}, 'spice-server': {'release': '5.el6', 'buildtime': '1319663438', 'version': '0.8.2'}, 'vdsm': {'release': '112.12.el6_2', 'buildtime': '1334495504', 'version': '4.9'}, 'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime': '1334776518', 'version': '0.12.1.2'}, 'libvirt': {'release': '23.el6_2.8', 'buildtime': '1333958926', 'version': '0.9.4'}, 'qemu-img': {'release': '2.209.el6_2.5', 'buildtime': '1334776518', 'version': '0.12.1.2'}} reservedMem = 256 software_revision = 112.12 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = C12E325E-3D69-11E1-91C1-5CF3FC981980_00:00:C9:D2:16:6C version_name = Snow Man vlans = {} vmTypes = ['kvm'] [root@h1 ~]# Regards, Keyur On Fri, Nov 9, 2012 at 7:36 PM, Yair Zaslavsky <yzaslavs@redhat.com> wrote:
For troubleshooting - Can you run on your host machine
vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)
and send us the results?
------------------------------
*From: *"Keyur Makwana" <kurmakwana@gmail.com> *To: *users@ovirt.org *Sent: *Friday, November 9, 2012 12:50:22 PM *Subject: *[Users] Ovirt Host (3.0) compatability issue with Cluster (3.1)
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation with an view to implement complete open source virtualization solution instead of using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2 (20120510.0.el6_2)
Post installation engine started fine but while trying to add host its giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster Default which is set to version 3.1.
I don't know what exact details I would need to share for troubleshooting. Hence I have attached a file with details of rpms installed on ovirt-engine and node. ( One may not like to scroll the entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance, Keyur
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

On 11/09/2012 03:33 PM, Keyur Makwana wrote:
Hello,
Thanks for having a look at this issue.
the cluster level supported by this node is 3.0. you should change your cluster level to 3.0 to use it (your DC should also be 3.0. you may need to create a new DC, since you can't lower a DC level if it has clusters in it iirc). but you are using in incompatible engine (ovirt) and node (rhev). they have different compatibility levels even if the numbers are the same.
On ovirt-engine - either of the command did not work.
Here is the output from the hypervisor.
[root@h1 ~]# vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:5e25411e9039'}], 'FC': [{'wwpn': '10000000c9cb2826', 'wwnn': '20000000c9cb2826', 'model': 'LPe1205-CIOv - Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn': '10000000c9cb2827', 'wwnn': '20000000c9cb2827', 'model': 'LPe1205-CIOv - Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}]} ISCSIInitiatorName = iqn.1994-05.com.redhat:5e25411e9039 bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 12 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,arat,epb,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1 cpuModel = Intel(R) Xeon(R) CPU E5645 @ 2.40GHz cpuSockets = 2 cpuSpeed = 2400.276 emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0', 'rhel6.0.0', 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] guestOverhead = 65 hooks = {'before_vm_start': {'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}}, 'after_vm_destroy': {'50_vhostmd': {'md5': '7e7509430304099f38e4a9de966af090'}}, 'before_vm_dehibernate': {'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}}, 'before_vm_migrate_destination': {'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}}} kvmEnabled = true lastClient = 172.29.5.200 lastClientIface = rhevm management_ip = 172.29.81.141 memSize = 64420 networks = {'rhevm': {'addr': '172.29.81.141', 'cfg': {'IPV6FORWARDING': 'no', 'IPV6INIT': 'no', 'SKIPLIBVIRT': 'True', 'IPADDR': '172.29.81.141', 'ONBOOT': 'yes', 'DELAY': '0', 'DEVICE': 'rhevm', 'NETMASK': '255.255.255.0', 'BOOTPROTO': 'static', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'GATEWAY': '172.29.81.1'}, 'ports': ['eth8'], 'netmask': '255.255.255.0', 'stp': 'off', 'gateway': '172.29.81.1'}} nics = {'eth9': {'hwaddr': '5C:F3:FC:98:19:82', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth8': {'hwaddr': '5C:F3:FC:98:19:80', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth7': {'hwaddr': '00:00:C9:D2:16:73', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth6': {'hwaddr': '00:00:C9:D2:16:6F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth5': {'hwaddr': '00:00:C9:D2:16:72', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth4': {'hwaddr': '00:00:C9:D2:16:6E', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth3': {'hwaddr': '00:00:C9:D2:16:71', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:00:C9:D2:16:6D', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:00:C9:D2:16:70', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth0': {'hwaddr': '00:00:C9:D2:16:6C', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '20120510.0.el6_2', 'version': '6.2', 'name': 'RHEV Hypervisor'} packages2 = {'kernel': {'release': '220.17.1.el6.x86_64', 'buildtime': 1335447433.0, 'version': '2.6.32'}, 'spice-server': {'release': '5.el6', 'buildtime': '1319663438', 'version': '0.8.2'}, 'vdsm': {'release': '112.12.el6_2', 'buildtime': '1334495504', 'version': '4.9'}, 'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime': '1334776518', 'version': '0.12.1.2'}, 'libvirt': {'release': '23.el6_2.8', 'buildtime': '1333958926', 'version': '0.9.4'}, 'qemu-img': {'release': '2.209.el6_2.5', 'buildtime': '1334776518', 'version': '0.12.1.2'}} reservedMem = 256 software_revision = 112.12 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = C12E325E-3D69-11E1-91C1-5CF3FC981980_00:00:C9:D2:16:6C version_name = Snow Man vlans = {} vmTypes = ['kvm'] [root@h1 ~]#
Regards, Keyur
On Fri, Nov 9, 2012 at 7:36 PM, Yair Zaslavsky <yzaslavs@redhat.com <mailto:yzaslavs@redhat.com>> wrote:
For troubleshooting - Can you run on your host machine
vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)
and send us the results?
------------------------------------------------------------------------
*From: *"Keyur Makwana" <kurmakwana@gmail.com <mailto:kurmakwana@gmail.com>> *To: *users@ovirt.org <mailto:users@ovirt.org> *Sent: *Friday, November 9, 2012 12:50:22 PM *Subject: *[Users] Ovirt Host (3.0) compatability issue with Cluster (3.1)
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation with an view to implement complete open source virtualization solution instead of using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2 (20120510.0.el6_2)
Post installation engine started fine but while trying to add host its giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster Default which is set to version 3.1.
I don't know what exact details I would need to share for troubleshooting. Hence I have attached a file with details of rpms installed on ovirt-engine and node. ( One may not like to scroll the entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance, Keyur
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Hello, Thanks for the update mates. Silly me! I loaded wrong ISO apparently. I shall update once am through the next installation. Thanks again! Regards, Keyur On Fri, Nov 9, 2012 at 8:49 PM, Itamar Heim <iheim@redhat.com> wrote:
On 11/09/2012 03:33 PM, Keyur Makwana wrote:
Hello,
Thanks for having a look at this issue.
the cluster level supported by this node is 3.0. you should change your cluster level to 3.0 to use it (your DC should also be 3.0. you may need to create a new DC, since you can't lower a DC level if it has clusters in it iirc).
but you are using in incompatible engine (ovirt) and node (rhev). they have different compatibility levels even if the numbers are the same.
On ovirt-engine - either of the command did not work.
Here is the output from the hypervisor.
[root@h1 ~]# vdsClient -s 0 getVdsCaps HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:**5e25411e9039'}], 'FC': [{'wwpn': '10000000c9cb2826', 'wwnn': '20000000c9cb2826', 'model': 'LPe1205-CIOv - Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn': '10000000c9cb2827', 'wwnn': '20000000c9cb2827', 'model': 'LPe1205-CIOv - Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}]} ISCSIInitiatorName = iqn.1994-05.com.redhat:**5e25411e9039 bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} clusterLevels = ['3.0'] cpuCores = 12 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,**mce,cx8,apic,mtrr,pge,mca,** cmov,pat,pse36,clflush,dts,**acpi,mmx,fxsr,sse,sse2,ss,ht,** tm,pbe,syscall,nx,pdpe1gb,**rdtscp,lm,constant_tsc,arch_** perfmon,pebs,bts,rep_good,**xtopology,nonstop_tsc,** aperfmperf,pni,pclmulqdq,**dtes64,monitor,ds_cpl,vmx,smx,** est,tm2,ssse3,cx16,xtpr,pdcm,**dca,sse4_1,sse4_2,popcnt,aes,** lahf_lm,arat,epb,dts,tpr_**shadow,vnmi,flexpriority,ept,** vpid,model_486,model_pentium,**model_pentium2,model_pentium3,** model_pentiumpro,model_qemu32,**model_coreduo,model_core2duo,** model_n270,model_Conroe,model_**Penryn,model_Nehalem,model_** Westmere,model_Opteron_G1 cpuModel = Intel(R) Xeon(R) CPU E5645 @ 2.40GHz cpuSockets = 2 cpuSpeed = 2400.276 emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0', 'rhel6.0.0', 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] guestOverhead = 65 hooks = {'before_vm_start': {'50_vhostmd': {'md5': '**1635e45584995d9ad2629939cb0bcd**bf'}}, 'after_vm_destroy': {'50_vhostmd': {'md5': '**7e7509430304099f38e4a9de966af0**90'}}, 'before_vm_dehibernate': {'50_vhostmd': {'md5': '**1635e45584995d9ad2629939cb0bcd**bf'}}, 'before_vm_migrate_**destination': {'50_vhostmd': {'md5': '**1635e45584995d9ad2629939cb0bcd**bf'}}} kvmEnabled = true lastClient = 172.29.5.200 lastClientIface = rhevm management_ip = 172.29.81.141 memSize = 64420 networks = {'rhevm': {'addr': '172.29.81.141', 'cfg': {'IPV6FORWARDING': 'no', 'IPV6INIT': 'no', 'SKIPLIBVIRT': 'True', 'IPADDR': '172.29.81.141', 'ONBOOT': 'yes', 'DELAY': '0', 'DEVICE': 'rhevm', 'NETMASK': '255.255.255.0', 'BOOTPROTO': 'static', 'IPV6_AUTOCONF': 'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'GATEWAY': '172.29.81.1'}, 'ports': ['eth8'], 'netmask': '255.255.255.0', 'stp': 'off', 'gateway': '172.29.81.1'}} nics = {'eth9': {'hwaddr': '5C:F3:FC:98:19:82', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth8': {'hwaddr': '5C:F3:FC:98:19:80', 'netmask': '', 'speed': 1000, 'addr': ''}, 'eth7': {'hwaddr': '00:00:C9:D2:16:73', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth6': {'hwaddr': '00:00:C9:D2:16:6F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth5': {'hwaddr': '00:00:C9:D2:16:72', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth4': {'hwaddr': '00:00:C9:D2:16:6E', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth3': {'hwaddr': '00:00:C9:D2:16:71', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:00:C9:D2:16:6D', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr': '00:00:C9:D2:16:70', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth0': {'hwaddr': '00:00:C9:D2:16:6C', 'netmask': '', 'speed': 0, 'addr': ''}} operatingSystem = {'release': '20120510.0.el6_2', 'version': '6.2', 'name': 'RHEV Hypervisor'} packages2 = {'kernel': {'release': '220.17.1.el6.x86_64', 'buildtime': 1335447433.0, 'version': '2.6.32'}, 'spice-server': {'release': '5.el6', 'buildtime': '1319663438', 'version': '0.8.2'}, 'vdsm': {'release': '112.12.el6_2', 'buildtime': '1334495504', 'version': '4.9'}, 'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime': '1334776518', 'version': '0.12.1.2'}, 'libvirt': {'release': '23.el6_2.8', 'buildtime': '1333958926', 'version': '0.9.4'}, 'qemu-img': {'release': '2.209.el6_2.5', 'buildtime': '1334776518', 'version': '0.12.1.2'}} reservedMem = 256 software_revision = 112.12 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0'] uuid = C12E325E-3D69-11E1-91C1-**5CF3FC981980_00:00:C9:D2:16:6C version_name = Snow Man vlans = {} vmTypes = ['kvm'] [root@h1 ~]#
Regards, Keyur
On Fri, Nov 9, 2012 at 7:36 PM, Yair Zaslavsky <yzaslavs@redhat.com <mailto:yzaslavs@redhat.com>> wrote:
For troubleshooting - Can you run on your host machine
vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)
and send us the results?
------------------------------**------------------------------** ------------
*From: *"Keyur Makwana" <kurmakwana@gmail.com <mailto:kurmakwana@gmail.com>> *To: *users@ovirt.org <mailto:users@ovirt.org> *Sent: *Friday, November 9, 2012 12:50:22 PM *Subject: *[Users] Ovirt Host (3.0) compatability issue with
Cluster (3.1)
Hello All,
I am new to Ovirt and trying to Implement Ovirt in my organisation with an view to implement complete open source virtualization solution instead of using VMware or other Paid once.
I have installed ovirt-engine on Fedora 17 and have installed Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization Hypervisor release 6.2 (20120510.0.el6_2)
Post installation engine started fine but while trying to add host its giving me error as below.
Host host1 is compatible with versions (3.0) and cannot join Cluster Default which is set to version 3.1.
I don't know what exact details I would need to share for troubleshooting. Hence I have attached a file with details of rpms installed on ovirt-engine and node. ( One may not like to scroll the entire file)
I might be missing something very silly or I may sound too stupid.
Ovirt masters : Please guide.
Thanks in advance, Keyur
______________________________**_________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>
______________________________**_________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>
participants (3)
-
Itamar Heim
-
Keyur Makwana
-
Yair Zaslavsky