Hey Marcel! You have to install the required glusterfs packages and then deploy the gluster setup on the 2 new hosts. After creating the required LVs, VGs, thinpools, mount points and bricks, you'll have to expand the gluster-cluster from the current host using add-brick functionality from gluster. After this you can add the 2 new hosts to your existing ovirt-engine. On Mon, Oct 26, 2020 at 7:40 PM Marcel d'Heureuse <marcel(a)deheureu.se&gt; wrote: > Hi, > > I got a problem with my Ovirt installation. Normally we deliver Ovirt as > single node installation and we told our service guys if the internal > client will have more redundancy we need two more server and add this to > the single node installation. i thought that no one would order two new > servers. > > Now I have the problem to get the system running. > > First item is, that this environment has no internet access. So I can't > install software by update with yum. > The Ovirt installation is running on Ovirt node 4.3.9 boot USB Stick. All > three servers have the same software installed. > On the single node I have installed the hosted Engine package 1,1 GB to > deploy the self-hosted engine without internet. That works. > > Gluster, Ovirt, Self-Hosted engine are running on the server 01. > > What should I do first? > > Deploy the Glusterfs first and then add the two new hosts to the single > node installation? > Or should I deploy a new Ovirt System to the two new hosts and add later > the cleaned host to the new Ovirt System? > > I have not found any items in this mailing list which gives me an idea > what I should do now. > > > Br > Marcel > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TNV5WNKTGUS... > _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6VXJVTPD24C...

Hey Marcel! You have to install the required glusterfs packages and then deploy the gluster setup on the 2 new hosts. After creating the required LVs, VGs, thinpools, mount points and bricks, you'll have to expand the gluster-cluster from the current host using add-brick functionality from gluster. After this you can add the 2 new hosts to your existing ovirt-engine. On Mon, Oct 26, 2020 at 7:40 PM Marcel d'Heureuse <marcel(a)deheureu.se&gt; wrote: > Hi, > > I got a problem with my Ovirt installation. Normally we deliver Ovirt as > single node installation and we told our service guys if the internal > client will have more redundancy we need two more server and add this to > the single node installation. i thought that no one would order two new > servers. > > Now I have the problem to get the system running. > > First item is, that this environment has no internet access. So I can't > install software by update with yum. > The Ovirt installation is running on Ovirt node 4.3.9 boot USB Stick. All > three servers have the same software installed. > On the single node I have installed the hosted Engine package 1,1 GB to > deploy the self-hosted engine without internet. That works. > > Gluster, Ovirt, Self-Hosted engine are running on the server 01. > > What should I do first? > > Deploy the Glusterfs first and then add the two new hosts to the single > node installation? > Or should I deploy a new Ovirt System to the two new hosts and add later > the cleaned host to the new Ovirt System? > > I have not found any items in this mailing list which gives me an idea > what I should do now. > > > Br > Marcel > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TNV5WNKTGUS... > _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6VXJVTPD24C...

Hi Strahil, where can I find some documents for the conversion to replica? works this also for the engine brick? br marcel Am 27. Oktober 2020 16:40:59 MEZ schrieb Strahil Nikolov via Users < users(a)ovirt.org&gt;: > > Hello Gobinda, > > I know that gluster can easily convert distributed volume to replica volume, so why it is not possible to first convert to replica and then add the nodes as HCI ? > > Best Regards, > Strahil Nikolov > > > > > > > В вторник, 27 октомври 2020 г., 08:20:56 Гринуич+2, Gobinda Das <godas(a)redhat.com&gt; написа: > > > > > > Hello Marcel, > For a note, you can't expand your single gluster node cluster to 3 nodes.Only you can add compute nodes. > If you want to add compute nodes then you do not need any glusterfs packages to be installed. Only ovirt packages are enough to add host as a compute node. > > On Tue, Oct 27, 2020 at 10:28 AM Parth Dhanjal <dparth(a)redhat.com&gt; wrote: > >> Hey Marcel! >> >> You have to install the required glusterfs packages and then deploy the gluster setup on the 2 new hosts. After creating the required LVs, VGs, thinpools, mount points and bricks, you'll have to expand the gluster-cluster from the current host using add-brick functionality from gluster. After this you can add the 2 new hosts to your existing ovirt-engine. >> >> On Mon, Oct 26, 2020 at 7:40 PM Marcel d'Heureuse <marcel(a)deheureu.se&gt; wrote: >> >>> Hi, >>> >>> I got a problem with my Ovirt installation. Normally we deliver Ovirt as >>> single node installation and we told our service guys if the internal >>> client will have more redundancy we need two more server and add this to >>> the single node installation. i thought that no one would order two new >>> servers. >>> >>> Now I have the problem to get the system running. >>> >>> First item is, that this environment has no internet access. So I can't >>> install software by update with yum. >>> The Ovirt installation is running on Ovirt node 4.3.9 boot USB Stick. All >>> three servers have the same software installed. >>> On the single node I have installed the hosted Engine package 1,1 GB to >>> deploy the self-hosted engine without internet. That works. >>> >>> Gluster, Ovirt, Self-Hosted engine are running on the server 01. >>> >>> What should I do first? >>> >>> Deploy the Glusterfs first and then add the two new hosts to the single >>> node installation? >>> Or should I deploy a new Ovirt System to the two new hosts and add later >>> the cleaned host to the new Ovirt System? >>> >>> I have not found any items in this mailing list which gives me an idea >>> what I should do now. >>> >>> >>> Br >>> Marcel >>> ------------------------------ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/privacy-policy.html >>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TNV5WNKTGUS... >>> >>> ------------------------------ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6VXJVTPD24C... >> >> >> > _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RJQZYYR2ZKE...

I guess the gluster documentation at https://docs.gluster.org/. If you have a single brick volume of type Distributed, then you can add 2 more bricks and convert the volume to 'replica 3' or 'replica 3 arbiter 1'  via: Get syntax: gluster volume add-brick help Actual convertion: gluster volume add-brick <VOLUME-even-Hosted-Engines> replica 3 [arbiter 1] ovirt2:/path/to-brick ovirt3:/path/to-brick If you remove the square brackets so the type is 'replica 3 arbiter 1' the second brick will be treated as an arbiter. WARNING: You need to create your bricks with inode size of at least 512 'mkfs.xfs -i size=512 /dev/vg/lv'. If you wish to use the snapshot functionality (I use it to snapshot my Engine's volume before patching), all bricks in the volume must use thin LV (which I think is not the default by the ansible plays). Ovirt was quite sensitive with the block device's physical sector size (lsblk -t shows it as PHY-SEC). If yours is bigger than 512 , you might (I'm not sure about new version of oVirt) need to use VDO with 'emulate512' flag.  Note: For an arbiter brick with XFS file system , it's worth considering to use an SSD and setting a higher percentage of inodes (option 'maxpct=' of mkfs.xfs). Best Regards, Strahil Nikolov В сряда, 28 октомври 2020 г., 00:33:22 Гринуич+2, marcel d'heureuse <marcel(a)deheureu.se&gt; написа: Hi Strahil, where can I find some documents for the conversion to replica? works this also for the engine brick? br marcel Am 27. Oktober 2020 16:40:59 MEZ schrieb Strahil Nikolov via Users <users(a)ovirt.org&gt;: >  Hello Gobinda,I know that gluster can easily convert distributed volume to replica volume, so why it is not possible to first convert to replica and then add the nodes as HCI ?Best Regards,Strahil NikolovВ вторник, 27 октомври 2020 г., 08:20:56 Гринуич+2, Gobinda Das <godas(a)redhat.com&gt; написа: Hello Marcel, For a note, you can't expand your single gluster node cluster to 3 nodes.Only you can add compute nodes.If you want to add compute nodes then you do not need any glusterfs packages to be installed. Only ovirt packages are enough to add host as a compute node.On Tue, Oct 27, 2020 at 10:28 AM Parth Dhanjal <dparth(a)redhat.com&gt; wrote:> Hey Marcel! >> >> You have to install the required glusterfs packages and then deploy the gluster setup on the 2 new hosts. After creating the required LVs, VGs, thinpools, mount points and bricks, you'll have to expand the gluster-cluster from the current host using add-brick functionality from gluster. After this you can add the 2 new hosts to your existing ovirt-engine. >> >> On Mon, Oct 26, 2020 at 7:40 PM Marcel d'Heureuse <marcel(a)deheureu.se&gt; wrote: >>> Hi, >>> >>> I got a problem with my Ovirt installation. Normally we deliver Ovirt as >>> single node installation and we told our service guys if the internal >>> client will have more redundancy we need two more server and add this to >>> the single node installation. i thought that no one would order two new >>> servers. >>> >>> Now I have the problem to get the system running. >>> >>> First item is, that this environment has no internet access. So I can't >>> install software by update with yum. >>> The Ovirt installation is running on Ovirt node 4.3.9 boot USB Stick. All >>> three servers have the same software installed. >>> On the single node I have installed the hosted Engine package 1,1 GB to >>> deploy the self-hosted engine without internet. That works. >>> >>> Gluster, Ovirt, Self-Hosted engine are running on the server 01. >>> >>> What should I do first? >>> >>> Deploy the Glusterfs first and then add the two new hosts to the single >>> node installation? >>> Or should I deploy a new Ovirt System to the two new hosts and add later >>> the cleaned host to the new Ovirt System? >>> >>> I have not found any items in this mailing list which gives me an idea >>> what I should do now. >>> >>> >>> Br >>> Marcel >>> ________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/privacy-policy.html >>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TNV5WNKTGUS... >>> >> ________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6VXJVTPD24C... >> >> > _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OPK4QQAYEIL...