5:41 p.m.
From: peterpennings <peterpnns(a)gmail.com>
This patch adds Linux and OVS bridges. netinfo.py had to be updated to show OVS bridges in
order to reflect the changes made in the UI.
peterpennings (1):
Issue #791: New UI for adding network bridges
netinfo.py | 3 +-
ui/js/src/kimchi.network.js | 2 +
ui/js/src/kimchi.network_add_main.js | 146 ++++++++++++++++++++++-------------
ui/pages/network-add.html.tmpl | 3 +-
4 files changed, 96 insertions(+), 58 deletions(-)
--
2.5.0
5:41 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
From: peterpennings <peterpnns(a)gmail.com>
This commit adds the new UI changes for network bridges and enables OVS bridges that where
temporary hidden
Signed-off-by: peterpennings <peterpnns(a)gmail.com>
---
netinfo.py | 3 +-
ui/js/src/kimchi.network.js | 2 +
ui/js/src/kimchi.network_add_main.js | 146 ++++++++++++++++++++++-------------
ui/pages/network-add.html.tmpl | 3 +-
4 files changed, 96 insertions(+), 58 deletions(-)
diff --git a/netinfo.py b/netinfo.py
index 2d83466..c00f603 100644
--- a/netinfo.py
+++ b/netinfo.py
@@ -221,8 +221,7 @@ def is_bare_nic(iface):
# a slave of bond.
# The bridge will not be exposed when all it's port are tap.
def all_favored_interfaces():
- return list(set(aggregated_bridges() + bare_nics() + bondings()) -
- set(ovs_bridges()))
+ return aggregated_bridges() + bare_nics() + bondings()
def get_interface_type(iface):
diff --git a/ui/js/src/kimchi.network.js b/ui/js/src/kimchi.network.js
index 923aeb9..96c3fea 100644
--- a/ui/js/src/kimchi.network.js
+++ b/ui/js/src/kimchi.network.js
@@ -17,6 +17,8 @@
*/
kimchi.NETWORK_TYPE_MACVTAP = "macvtap";
+kimchi.NETWORK_TYPE_BRIDGED = "bridge";
+
kimchi.initNetwork = function() {
if(wok.tabMode['network'] === 'admin') {
diff --git a/ui/js/src/kimchi.network_add_main.js b/ui/js/src/kimchi.network_add_main.js
index 76d436f..603a5ee 100644
--- a/ui/js/src/kimchi.network_add_main.js
+++ b/ui/js/src/kimchi.network_add_main.js
@@ -31,20 +31,20 @@ kimchi.startNetworkCreation = function() {
var network = kimchi.getNetworkDialogValues();
var data = {
name : network.name,
- connection: network.type
+ connection: network.type,
+ interface: network.interface,
+ vlan_id: network.vlan_id
};
- if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
- data.connection = "macvtap";
- data.interface = network.interface;
- if ($("#enableVlan").prop("checked")) {
+
+ if (network.type === kimchi.NETWORK_TYPE_BRIDGED &&
$("#enableVlan").prop("checked")) {
data.vlan_id = network.vlan_id;
if (!(data.vlan_id >=1 && data.vlan_id <= 4094)) {
wok.message.error.code('KCHNET6001E');
errorCallback();
return;
}
- }
}
+
kimchi.createNetwork(data, function(result) {
network.state = result.state === "active" ? "up" :
"down";
network.interface = result.interface ? result.interface :
i18n["KCHNET6001M"];
@@ -59,30 +59,8 @@ kimchi.startNetworkCreation = function() {
};
kimchi.openNetworkDialog = function(okCallback) {
- kimchi.getInterfaces(function(result) {
- var options = [];
- $selectDestination = $('#networkDestinationID');
- var nics = {};
- var selectDestinationOptionHTML = '';
- for (var i = 0; i < result.length; i++) {
- options.push({label:result[i].name,value:result[i].name});
- nics[result[i].name] = result[i];
- selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
- }
- $selectDestination.append(selectDestinationOptionHTML);
- $selectDestination.selectpicker();
- onChange = function() {
- if (result.length>0 && $selectDestination.val() !== "")
{
- $("#enableVlan").prop("disabled",false);
- $("#networkVlanID").val("");
- } else {
- $("#enableVlan").prop("disabled",true);
- }
- };
- $("#networkDestinationID").on("change", onChange);
- kimchi.setDefaultNetworkType(result.length!==0);
- onChange();
- });
+ kimchi.loadInterfaces();
+
$("#networkFormOk").on("click", function() {
$("#networkFormOk").button("disable");
$("#networkName").prop("readonly", "readonly");
@@ -98,28 +76,10 @@ kimchi.openNetworkDialog = function(okCallback) {
});
};
-kimchi.enableBridgeOptions = function(enable) {
- $("#enableVlan").prop("checked", false);
- $("#networkVlanID").val("");
- if (enable) {
- $('#bridgedContent').slideDown(300);
- $('#enableVlan').prop("disabled", false);
- $('#networkVlanID').prop("disabled", true);
- } else {
- $('#bridgedContent').slideUp(300);
- $('#enableVlan').prop("disabled", true);
- $('#networkVlanID').prop("disabled", true);
- }
-};
-
-
kimchi.setDefaultNetworkType = function(isInterfaceAvail) {
- $("#networkType").val('macvtap', isInterfaceAvail);
- $("#networkType
option:contains('bridged')").prop("disabled", !isInterfaceAvail);
- $("#networkType").val('nat', !isInterfaceAvail);
$("#networkType").selectpicker();
if (!isInterfaceAvail) {
- kimchi.enableBridgeOptions(false);
+ kimchi.enableBridgeOptions2(false);
$("#networkBriDisabledLabel").removeClass('hidden');
} else {
if (kimchi.capabilities && kimchi.capabilities.nm_running) {
@@ -136,7 +96,12 @@ kimchi.getNetworkDialogValues = function() {
};
if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
network.interface = $("#networkDestinationID").val();
- network.vlan_id = parseInt($("#networkVlanID").val());
+ }
+ if (network.type === kimchi.NETWORK_TYPE_BRIDGED) {
+ network.interface = $("#networkDestinationID").val();
+ if (network.interface === 'nic' || network.interface ===
'bonding') {
+ network.vlan_id = parseInt($("#networkVlanID").val());
+ }
}
return network;
};
@@ -147,14 +112,26 @@ kimchi.setupNetworkFormEvent = function() {
$("#networkName").toggleClass("invalid-field",
!$("#networkName").val().match(/^[^\"\/]+$/));
kimchi.updateNetworkFormButton();
});
- $('#networkType').on('change', function() {
- var selectedType = $(this).val();
+
+ $('#networkType, #networkDestinationID').on('change', function() {
+ var selectedType = $("#networkType").val();
+ var selectedDestination = $("#networkDestinationID").val();
if(selectedType == 'isolated' || selectedType == 'nat') {
- kimchi.enableBridgeOptions(false);
- } else if (selectedType == 'macvtap') {
- kimchi.enableBridgeOptions(true);
+ kimchi.enableBridgeOptions2(false);
+ } else {
+ kimchi.enableBridgeOptions2(true, selectedType, selectedDestination);
}
+
});
+
+ $('#networkType').on('change', function() {
+ var selectedType = $("#networkType").val();
+ if(selectedType === kimchi.NETWORK_TYPE_MACVTAP) {
+ kimchi.loadInterfaces(new Array("nic", "bonding"));
+ } else {
+ kimchi.loadInterfaces();
+ }
+ });
};
kimchi.updateNetworkFormButton = function() {
@@ -164,3 +141,62 @@ kimchi.updateNetworkFormButton = function() {
$("#networkFormOk").button("enable");
}
};
+
+kimchi.enableBridgeOptions2 = function(enable, networkType, networkDestination) {
+ $("#enableVlan").prop("checked", false);
+ $("#networkVlanID").val("");
+ $('#vlan').hide();
+ if (enable) {
+ $('#bridgedContent').slideDown(300);
+ $('#enableVlan').prop("disabled", false);
+ $('#networkVlanID').prop("disabled", true);
+ if (networkType === kimchi.NETWORK_TYPE_BRIDGED && (networkDestination
=== 'nic' || networkDestination === 'bonding')) {
+ $('#vlan').show();
+ }
+ } else {
+ $('#bridgedContent').slideUp(300);
+ $('#enableVlan').prop("disabled", true);
+ $('#networkVlanID').prop("disabled", true);
+ };
+
+};
+
+kimchi.loadInterfaces = function(interfaceFilterArray) {
+ kimchi.getInterfaces(function(result) {
+
+ var options = [];
+ $selectDestination = $('#networkDestinationID');
+ var nics = {};
+ $('#networkDestinationID').find('option').remove();
+ var selectDestinationOptionHTML = '';
+ for (var i = 0; i < result.length; i++) {
+ if (typeof interfaceFilterArray === 'undefined') {
+ options.push({label:result[i].name,value:result[i].name});
+ nics[result[i].name] = result[i];
+ selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
+ } else {
+ for (var k = 0; k < interfaceFilterArray.length; k++) {
+ if (result[i].type == interfaceFilterArray[k]) {
+ options.push({label:result[i].name,value:result[i].name});
+ nics[result[i].name] = result[i];
+ selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
+ }
+ }
+ }
+
+ }
+ $selectDestination.append(selectDestinationOptionHTML);
+ $('#networkDestinationID').selectpicker('refresh');
+ onChange = function() {
+ if (result.length>0 && $selectDestination.val() !== "")
{
+ $("#enableVlan").prop("disabled",false);
+ $("#networkVlanID").val("");
+ } else {
+ $("#enableVlan").prop("disabled",true);
+ }
+ };
+ kimchi.setDefaultNetworkType(result.length!==0);
+ onChange();
+ });
+};
+
diff --git a/ui/pages/network-add.html.tmpl b/ui/pages/network-add.html.tmpl
index 7158b75..b1f3e21 100644
--- a/ui/pages/network-add.html.tmpl
+++ b/ui/pages/network-add.html.tmpl
@@ -41,6 +41,7 @@
<option value="isolated">$_("Isolated: no external
network connection")</option>
<option value="nat">$_("NAT: outbound physical
network connection only")</option>
<option value="macvtap">$_("Bridged: Virtual
machines are connected to physical network directly")</option>
+ <option value="bridge">$_("Linux bridges and OVS
bridges")</option>
</select>
</div>
<div id="networkBriDisabledLabel" class="form-group
hidden">
@@ -52,7 +53,7 @@
<select id="networkDestinationID" class="selectpicker
col-md-12 col-lg-12">
</select>
</div>
- <div class="form-group">
+ <div class="form-group" id="vlan">
<input id="enableVlan" class="wok-checkbox"
type="checkbox" value="" />
<label for="enableVlan"
id="labelEnableVlan">$_("Enable VLAN") </label>
<div id="vlan-enabled">
--
2.5.0
2:18 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
On 02/03/2016 02:41 PM, peterpnns(a)gmail.com wrote:
From: peterpennings <peterpnns(a)gmail.com>
This commit adds the new UI changes for network bridges and enables OVS bridges that
where temporary hidden
Signed-off-by: peterpennings <peterpnns(a)gmail.com>
---
netinfo.py | 3 +-
ui/js/src/kimchi.network.js | 2 +
ui/js/src/kimchi.network_add_main.js | 146 ++++++++++++++++++++++-------------
ui/pages/network-add.html.tmpl | 3 +-
4 files changed, 96 insertions(+), 58 deletions(-)
diff --git a/netinfo.py b/netinfo.py
index 2d83466..c00f603 100644
--- a/netinfo.py
+++ b/netinfo.py
@@ -221,8 +221,7 @@ def is_bare_nic(iface):
# a slave of bond.
# The bridge will not be exposed when all it's port are tap.
def all_favored_interfaces():
- return list(set(aggregated_bridges() + bare_nics() + bondings()) -
- set(ovs_bridges()))
+ return aggregated_bridges() + bare_nics() + bondings()
def get_interface_type(iface):
diff --git a/ui/js/src/kimchi.network.js b/ui/js/src/kimchi.network.js
index 923aeb9..96c3fea 100644
--- a/ui/js/src/kimchi.network.js
+++ b/ui/js/src/kimchi.network.js
@@ -17,6 +17,8 @@
*/
kimchi.NETWORK_TYPE_MACVTAP = "macvtap";
+kimchi.NETWORK_TYPE_BRIDGED = "bridge";
+
kimchi.initNetwork = function() {
if(wok.tabMode['network'] === 'admin') {
diff --git a/ui/js/src/kimchi.network_add_main.js b/ui/js/src/kimchi.network_add_main.js
index 76d436f..603a5ee 100644
--- a/ui/js/src/kimchi.network_add_main.js
+++ b/ui/js/src/kimchi.network_add_main.js
@@ -31,20 +31,20 @@ kimchi.startNetworkCreation = function() {
var network = kimchi.getNetworkDialogValues();
var data = {
name : network.name,
- connection: network.type
+ connection: network.type,
+ interface: network.interface,
+ vlan_id: network.vlan_id
};
- if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
- data.connection = "macvtap";
- data.interface = network.interface;
- if ($("#enableVlan").prop("checked")) {
+
+ if (network.type === kimchi.NETWORK_TYPE_BRIDGED &&
$("#enableVlan").prop("checked")) {
data.vlan_id = network.vlan_id;
if (!(data.vlan_id >=1 && data.vlan_id <= 4094)) {
wok.message.error.code('KCHNET6001E');
errorCallback();
return;
}
- }
}
+
kimchi.createNetwork(data, function(result) {
network.state = result.state === "active" ? "up" :
"down";
network.interface = result.interface ? result.interface :
i18n["KCHNET6001M"];
@@ -59,30 +59,8 @@ kimchi.startNetworkCreation = function() {
};
kimchi.openNetworkDialog = function(okCallback) {
- kimchi.getInterfaces(function(result) {
- var options = [];
- $selectDestination = $('#networkDestinationID');
- var nics = {};
- var selectDestinationOptionHTML = '';
- for (var i = 0; i < result.length; i++) {
- options.push({label:result[i].name,value:result[i].name});
- nics[result[i].name] = result[i];
- selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
- }
- $selectDestination.append(selectDestinationOptionHTML);
- $selectDestination.selectpicker();
- onChange = function() {
- if (result.length>0 && $selectDestination.val() !== "")
{
- $("#enableVlan").prop("disabled",false);
- $("#networkVlanID").val("");
- } else {
- $("#enableVlan").prop("disabled",true);
- }
- };
- $("#networkDestinationID").on("change", onChange);
- kimchi.setDefaultNetworkType(result.length!==0);
- onChange();
- });
+ kimchi.loadInterfaces();
+
$("#networkFormOk").on("click", function() {
$("#networkFormOk").button("disable");
$("#networkName").prop("readonly", "readonly");
@@ -98,28 +76,10 @@ kimchi.openNetworkDialog = function(okCallback) {
});
};
-kimchi.enableBridgeOptions = function(enable) {
- $("#enableVlan").prop("checked", false);
- $("#networkVlanID").val("");
- if (enable) {
- $('#bridgedContent').slideDown(300);
- $('#enableVlan').prop("disabled", false);
- $('#networkVlanID').prop("disabled", true);
- } else {
- $('#bridgedContent').slideUp(300);
- $('#enableVlan').prop("disabled", true);
- $('#networkVlanID').prop("disabled", true);
- }
-};
-
-
kimchi.setDefaultNetworkType = function(isInterfaceAvail) {
- $("#networkType").val('macvtap', isInterfaceAvail);
- $("#networkType
option:contains('bridged')").prop("disabled", !isInterfaceAvail);
- $("#networkType").val('nat', !isInterfaceAvail);
$("#networkType").selectpicker();
if (!isInterfaceAvail) {
- kimchi.enableBridgeOptions(false);
+ kimchi.enableBridgeOptions2(false);
Why did you rename the function name to 'enableBridgedOptions*2*' ?
$("#networkBriDisabledLabel").removeClass('hidden');
} else {
if (kimchi.capabilities && kimchi.capabilities.nm_running) {
@@ -136,7 +96,12 @@ kimchi.getNetworkDialogValues = function() {
};
if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
network.interface = $("#networkDestinationID").val();
- network.vlan_id = parseInt($("#networkVlanID").val());
+ }
+ if (network.type === kimchi.NETWORK_TYPE_BRIDGED) {
+ network.interface = $("#networkDestinationID").val();
+ if (network.interface === 'nic' || network.interface ===
'bonding') {
+ network.vlan_id = parseInt($("#networkVlanID").val());
+ }
}
The VLAN information is associated with a macvtap bridge not with a
Linux brigde.
The current bridged UI (ie, macvtap) needs to keep the same.
We will only add a new option "Linux bridged" which will also list the
interface combo box but without the VLAN configuration.
return network;
};
@@ -147,14 +112,26 @@ kimchi.setupNetworkFormEvent = function() {
$("#networkName").toggleClass("invalid-field",
!$("#networkName").val().match(/^[^\"\/]+$/));
kimchi.updateNetworkFormButton();
});
- $('#networkType').on('change', function() {
- var selectedType = $(this).val();
+
+ $('#networkType, #networkDestinationID').on('change', function() {
+ var selectedType = $("#networkType").val();
+ var selectedDestination = $("#networkDestinationID").val();
if(selectedType == 'isolated' || selectedType == 'nat') {
- kimchi.enableBridgeOptions(false);
- } else if (selectedType == 'macvtap') {
- kimchi.enableBridgeOptions(true);
+ kimchi.enableBridgeOptions2(false);
+ } else {
+ kimchi.enableBridgeOptions2(true, selectedType, selectedDestination);
}
+
});
+
+ $('#networkType').on('change', function() {
+ var selectedType = $("#networkType").val();
+ if(selectedType === kimchi.NETWORK_TYPE_MACVTAP) {
+ kimchi.loadInterfaces(new Array("nic", "bonding"));
+ } else {
+ kimchi.loadInterfaces();
+ }
+ });
};
kimchi.updateNetworkFormButton = function() {
@@ -164,3 +141,62 @@ kimchi.updateNetworkFormButton = function() {
$("#networkFormOk").button("enable");
}
};
+
+kimchi.enableBridgeOptions2 = function(enable, networkType, networkDestination) {
+ $("#enableVlan").prop("checked", false);
+ $("#networkVlanID").val("");
+ $('#vlan').hide();
+ if (enable) {
+ $('#bridgedContent').slideDown(300);
+ $('#enableVlan').prop("disabled", false);
+ $('#networkVlanID').prop("disabled", true);
+ if (networkType === kimchi.NETWORK_TYPE_BRIDGED && (networkDestination
=== 'nic' || networkDestination === 'bonding')) {
+ $('#vlan').show();
+ }
+ } else {
+ $('#bridgedContent').slideUp(300);
+ $('#enableVlan').prop("disabled", true);
+ $('#networkVlanID').prop("disabled", true);
+ };
+
+};
+
+kimchi.loadInterfaces = function(interfaceFilterArray) {
+ kimchi.getInterfaces(function(result) {
+
+ var options = [];
+ $selectDestination = $('#networkDestinationID');
+ var nics = {};
+ $('#networkDestinationID').find('option').remove();
+ var selectDestinationOptionHTML = '';
+ for (var i = 0; i < result.length; i++) {
+ if (typeof interfaceFilterArray === 'undefined') {
+ options.push({label:result[i].name,value:result[i].name});
+ nics[result[i].name] = result[i];
+ selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
+ } else {
+ for (var k = 0; k < interfaceFilterArray.length; k++) {
+ if (result[i].type == interfaceFilterArray[k]) {
+ options.push({label:result[i].name,value:result[i].name});
+ nics[result[i].name] = result[i];
+ selectDestinationOptionHTML += '<option
value="'+ result[i].name + '">' + result[i].name +
'</option>';
+ }
+ }
+ }
+
+ }
+ $selectDestination.append(selectDestinationOptionHTML);
+ $('#networkDestinationID').selectpicker('refresh');
+ onChange = function() {
+ if (result.length>0 && $selectDestination.val() !== "")
{
+ $("#enableVlan").prop("disabled",false);
+ $("#networkVlanID").val("");
+ } else {
+ $("#enableVlan").prop("disabled",true);
+ }
+ };
+ kimchi.setDefaultNetworkType(result.length!==0);
+ onChange();
+ });
+};
+
diff --git a/ui/pages/network-add.html.tmpl b/ui/pages/network-add.html.tmpl
index 7158b75..b1f3e21 100644
--- a/ui/pages/network-add.html.tmpl
+++ b/ui/pages/network-add.html.tmpl
@@ -41,6 +41,7 @@
<option value="isolated">$_("Isolated: no external
network connection")</option>
<option value="nat">$_("NAT: outbound physical
network connection only")</option>
<option value="macvtap">$_("Bridged: Virtual
machines are connected to physical network directly")</option>
+ <option
value="bridge">$_("Linux bridges and OVS bridges")</option>
Please, use: "Linux bridged: Virtual machines are connected through a
network bridge"
</select>
</div>
<div id="networkBriDisabledLabel" class="form-group
hidden">
@@ -52,7 +53,7 @@
<select id="networkDestinationID"
class="selectpicker col-md-12 col-lg-12">
</select>
</div>
- <div class="form-group">
+ <div class="form-group" id="vlan">
<input id="enableVlan" class="wok-checkbox"
type="checkbox" value="" />
<label for="enableVlan"
id="labelEnableVlan">$_("Enable VLAN") </label>
<div id="vlan-enabled">
Also every time, I change the network type on combo box a new warning
message about the Network Manager is appended in the dialog.
It happened to have 4 messages in a time.
3:38 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
Hi Aline,
*- Why did you rename the function name to 'enableBridgedOptions2' ?*
Sorry, my mistake, I will replace the name of this function.
*- The VLAN information is associated with a macvtap bridge not with a
Linux brigde.*
*- We will only add a new option "Linux bridged" which will also list the
interface combo box but without the VLAN configuration.*
I followed this specification:
https://github.com/kimchi-project/kimchi/issues/791. Maybe I understood
something wrong. Should I show de VLAN information for macvtap?
*- Please, use: "Linux bridged: Virtual machines are connected through a
network bridge"*
Ok, I will do it.
2016-02-04 11:18 GMT-02:00 Aline Manera <alinefm(a)linux.vnet.ibm.com>:
On 02/03/2016 02:41 PM, peterpnns(a)gmail.com wrote:
From: peterpennings <peterpnns(a)gmail.com> <peterpnns(a)gmail.com>
This commit adds the new UI changes for network bridges and enables OVS bridges that
where temporary hidden
Signed-off-by: peterpennings <peterpnns(a)gmail.com> <peterpnns(a)gmail.com>
---
netinfo.py | 3 +-
ui/js/src/kimchi.network.js | 2 +
ui/js/src/kimchi.network_add_main.js | 146 ++++++++++++++++++++++-------------
ui/pages/network-add.html.tmpl | 3 +-
4 files changed, 96 insertions(+), 58 deletions(-)
diff --git a/netinfo.py b/netinfo.py
index 2d83466..c00f603 100644
--- a/netinfo.py
+++ b/netinfo.py
@@ -221,8 +221,7 @@ def is_bare_nic(iface):
# a slave of bond.
# The bridge will not be exposed when all it's port are tap.
def all_favored_interfaces():
- return list(set(aggregated_bridges() + bare_nics() + bondings()) -
- set(ovs_bridges()))
+ return aggregated_bridges() + bare_nics() + bondings()
def get_interface_type(iface):
diff --git a/ui/js/src/kimchi.network.js b/ui/js/src/kimchi.network.js
index 923aeb9..96c3fea 100644
--- a/ui/js/src/kimchi.network.js
+++ b/ui/js/src/kimchi.network.js
@@ -17,6 +17,8 @@
*/
kimchi.NETWORK_TYPE_MACVTAP = "macvtap";
+kimchi.NETWORK_TYPE_BRIDGED = "bridge";
+
kimchi.initNetwork = function() {
if(wok.tabMode['network'] === 'admin') {
diff --git a/ui/js/src/kimchi.network_add_main.js b/ui/js/src/kimchi.network_add_main.js
index 76d436f..603a5ee 100644
--- a/ui/js/src/kimchi.network_add_main.js
+++ b/ui/js/src/kimchi.network_add_main.js
@@ -31,20 +31,20 @@ kimchi.startNetworkCreation = function() {
var network = kimchi.getNetworkDialogValues();
var data = {
name : network.name,
- connection: network.type
+ connection: network.type,
+ interface: network.interface,
+ vlan_id: network.vlan_id
};
- if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
- data.connection = "macvtap";
- data.interface = network.interface;
- if ($("#enableVlan").prop("checked")) {
+
+ if (network.type === kimchi.NETWORK_TYPE_BRIDGED &&
$("#enableVlan").prop("checked")) {
data.vlan_id = network.vlan_id;
if (!(data.vlan_id >=1 && data.vlan_id <= 4094)) {
wok.message.error.code('KCHNET6001E');
errorCallback();
return;
}
- }
}
+
kimchi.createNetwork(data, function(result) {
network.state = result.state === "active" ? "up" :
"down";
network.interface = result.interface ? result.interface :
i18n["KCHNET6001M"];
@@ -59,30 +59,8 @@ kimchi.startNetworkCreation = function() {
};
kimchi.openNetworkDialog = function(okCallback) {
- kimchi.getInterfaces(function(result) {
- var options = [];
- $selectDestination = $('#networkDestinationID');
- var nics = {};
- var selectDestinationOptionHTML = '';
- for (var i = 0; i < result.length; i++) {
- options.push({label:result[i].name,value:result[i].name});
- nics[result[i].name] = result[i];
- selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
- }
- $selectDestination.append(selectDestinationOptionHTML);
- $selectDestination.selectpicker();
- onChange = function() {
- if (result.length>0 && $selectDestination.val() !== "")
{
- $("#enableVlan").prop("disabled",false);
- $("#networkVlanID").val("");
- } else {
- $("#enableVlan").prop("disabled",true);
- }
- };
- $("#networkDestinationID").on("change", onChange);
- kimchi.setDefaultNetworkType(result.length!==0);
- onChange();
- });
+ kimchi.loadInterfaces();
+
$("#networkFormOk").on("click", function() {
$("#networkFormOk").button("disable");
$("#networkName").prop("readonly", "readonly");
@@ -98,28 +76,10 @@ kimchi.openNetworkDialog = function(okCallback) {
});
};
-kimchi.enableBridgeOptions = function(enable) {
- $("
<);@@-98,28+76,10@@kimchi.openNetworkDialog=function(okCallback)%7B%7D);%7D;-kimchi.enableBridgeOptions=function(enable)%7B-$(>#enableVlan").prop("checked",
false);
- $("#networkVlanID").val("");
- if (enable) {
- $('#bridgedContent').slideDown(300);
- $('#enableVlan').prop("disabled", false);
- $('#networkVlanID').prop("disabled", true);
- } else {
- $('#bridgedContent').slideUp(300);
- $('#enableVlan').prop("disabled", true);
- $('#networkVlanID').prop("disabled", true);
- }
-};
-
-
kimchi.setDefaultNetworkType = function(isInterfaceAvail) {
- $("#networkType").val('macvtap', isInterfaceAvail);
- $("#networkType
option:contains('bridged')").prop("disabled", !isInterfaceAvail);
- $("#networkType").val('nat', !isInterfaceAvail);
$("#networkType").selectpicker();
if (!isInterfaceAvail) {
- kimchi.enableBridgeOptions(false);
+ kimchi.enableBridgeOptions2(false);
Why did you rename the function name to 'enableBridgedOptions*2*' ?
$("#networkBriDisabledLabel").removeClass('hidden');
} else {
if (kimchi.capabilities && kimchi.capabilities.nm_running) {
@@ -136,7 +96,12 @@ kimchi.getNetworkDialogValues = function() {
};
if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
network.interface = $("#networkDestinationID").val();
- network.vlan_id = parseInt($("#networkVlanID").val());
+ }
+ if (network.type === kimchi.NETWORK_TYPE_BRIDGED) {
+ network.interface = $("#networkDestinationID").val();
+ if (network.interface === 'nic' || network.interface ===
'bonding') {
+ network.vlan_id = parseInt($("#networkVlanID").val());
+ }
}
The VLAN information is associated with a macvtap bridge not with a Linux
brigde.
The current bridged UI (ie, macvtap) needs to keep the same.
We will only add a new option "Linux bridged" which will also list the
interface combo box but without the VLAN configuration.
return network;
};
@@ -147,14 +112,26 @@ kimchi.setupNetworkFormEvent = function() {
$("#networkName").toggleClass("invalid-field",
!$("#networkName").val().match(/^[^\"\/]+$/));
kimchi.updateNetworkFormButton();
});
- $('#networkType').on('change', function() {
- var selectedType = $(this).val();
+
+ $('#networkType, #networkDestinationID').on('change', function() {
+ var selectedType = $("#networkType").val();
+ var selectedDestination = $("#networkDestinationID").val();
if(selectedType == 'isolated' || selectedType == 'nat') {
- kimchi.enableBridgeOptions(false);
- } else if (selectedType == 'macvtap') {
- kimchi.enableBridgeOptions(true);
+ kimchi.enableBridgeOptions2(false);
+ } else {
+ kimchi.enableBridgeOptions2(true, selectedType, selectedDestination);
}
+
});
+
+ $('#networkType').on('change', function() {
+ var selectedType = $("#networkType").val();
+ if(selectedType === kimchi.NETWORK_TYPE_MACVTAP) {
+ kimchi.loadInterfaces(new Array("nic", "bonding"));
+ } else {
+ kimchi.loadInterfaces();
+ }
+ });
};
kimchi.updateNetworkFormButton = function() {
@@ -164,3 +141,62 @@ kimchi.updateNetworkFormButton = function() {
$("#networkFormOk").button("enable");
}
};
+
+kimchi.enableBridgeOptions2 = function(enable, networkType, networkDestination) {
+ $("#enableVlan").prop("checked", false);
+ $("#networkVlanID").val("");
+ $('#vlan').hide();
+ if (enable) {
+ $('#bridgedContent').slideDown(300);
+ $('#enableVlan').prop("disabled", false);
+ $('#networkVlanID').prop("disabled", true);
+ if (networkType === kimchi.NETWORK_TYPE_BRIDGED && (networkDestination
=== 'nic' || networkDestination === 'bonding')) {
+ $('#vlan').show();
+ }
+ } else {
+ $('#bridgedContent').slideUp(300);
+ $('#enableVlan').prop("disabled", true);
+ $('#networkVlanID').prop("disabled", true);
+ };
+
+};
+
+kimchi.loadInterfaces = function(interfaceFilterArray) {
+ kimchi.getInterfaces(function(result) {
+
+ var options = [];
+ $selectDestination = $('#networkDestinationID');
+ var nics = {};
+ $('#networkDestinationID').find('option').remove();
+ var selectDestinationOptionHTML = '';
+ for (var i = 0; i < result.length; i++) {
+ if (typeof interfaceFilterArray === 'undefined') {
+ options.push({label:result[i].name,value:result[i].name});
+ nics[result[i].name] = result[i];
+ selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
+ } else {
+ for (var k = 0; k < interfaceFilterArray.length; k++) {
+ if (result[i].type == interfaceFilterArray[k]) {
+ options.push({label:result[i].name,value:result[i].name});
+ nics[result[i].name] = result[i];
+ selectDestinationOptionHTML += '<option
value="'+ result[i].name + '">' + result[i].name +
'</option>';
+ }
+ }
+ }
+
+ }
+ $selectDestination.append(selectDestinationOptionHTML);
+ $('#networkDestinationID').selectpicker('refresh');
+ onChange = function() {
+ if (result.length>0 && $selectDestination.val() !== "")
{
+ $("#enableVlan").prop("disabled",false);
+ $("#networkVlanID").val("");
+ } else {
+ $("#enableVlan").prop("disabled",true);
+ }
+ };
+ kimchi.setDefaultNetworkType(result.length!==0);
+ onChange();
+ });
+};
+
diff --git a/ui/pages/network-add.html.tmpl b/ui/pages/network-add.html.tmpl
index 7158b75..b1f3e21 100644
--- a/ui/pages/network-add.html.tmpl
+++ b/ui/pages/network-add.html.tmpl
@@ -41,6 +41,7 @@
<option value="isolated">$_("Isolated: no external
network connection")</option>
<option value="nat">$_("NAT: outbound physical
network connection only")</option>
<option value="macvtap">$_("Bridged: Virtual
machines are connected to physical network directly")</option>
+ <option value="bridge">$_("Linux bridges and OVS
bridges")</option>
Please, use: "Linux bridged: Virtual machines are connected through a
network bridge"
</select>
</div>
<div id="networkBriDisabledLabel" class="form-group
hidden">
@@ -52,7 +53,7 @@
<select id="networkDestinationID" class="selectpicker
col-md-12 col-lg-12">
</select>
</div>
- <div class="form-group">
+ <div class="form-group" id="vlan">
<input id="enableVlan" class="wok-checkbox"
type="checkbox" value="" />
<label for="enableVlan"
id="labelEnableVlan">$_("Enable VLAN") </label>
<div id="vlan-enabled">
Also every time, I change the network type on combo box a new warning
message about the Network Manager is appended in the dialog.
It happened to have 4 messages in a time.
5:37 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
On 02/04/2016 12:38 PM, Peter Pennings wrote:
Hi Aline,
*- Why did you rename the function name to 'enableBridgedOptions2' ?*
Sorry, my mistake, I will replace the name of this function.
*- The VLAN information is associated with a macvtap bridge not with a
Linux brigde.*
*- We will only add a new option "Linux bridged" which will also list
the interface combo box but without the VLAN configuration.*
*
*
I followed this specification:
https://github.com/kimchi-project/kimchi/issues/791. Maybe I
understood something wrong. Should I show de VLAN information for macvtap?
Sorry, you are correct!
But either way, I am not able to set a VLAN when selecting the Linux
bridge option.
*- Please, use: "Linux bridged: Virtual machines are connected through
a network bridge"*
*
*
Ok, I will do it.
2016-02-04 11:18 GMT-02:00 Aline Manera <alinefm(a)linux.vnet.ibm.com
<mailto:alinefm@linux.vnet.ibm.com>>:
On 02/03/2016 02:41 PM, peterpnns(a)gmail.com
<mailto:peterpnns@gmail.com> wrote:
> From: peterpennings<peterpnns(a)gmail.com>
<mailto:peterpnns@gmail.com>
>
> This commit adds the new UI changes for network bridges and enables OVS bridges
that where temporary hidden
>
> Signed-off-by: peterpennings<peterpnns(a)gmail.com>
<mailto:peterpnns@gmail.com>
> ---
> netinfo.py | 3 +-
> ui/js/src/kimchi.network.js | 2 +
> ui/js/src/kimchi.network_add_main.js | 146 ++++++++++++++++++++++-------------
> ui/pages/network-add.html.tmpl | 3 +-
> 4 files changed, 96 insertions(+), 58 deletions(-)
>
> diff --git a/netinfo.py b/netinfo.py
> index 2d83466..c00f603 100644
> --- a/netinfo.py
> +++ b/netinfo.py
> @@ -221,8 +221,7 @@ def is_bare_nic(iface):
> # a slave of bond.
> # The bridge will not be exposed when all it's port are tap.
> def all_favored_interfaces():
> - return list(set(aggregated_bridges() + bare_nics() + bondings()) -
> - set(ovs_bridges()))
> + return aggregated_bridges() + bare_nics() + bondings()
>
>
> def get_interface_type(iface):
> diff --git a/ui/js/src/kimchi.network.js b/ui/js/src/kimchi.network.js
> index 923aeb9..96c3fea 100644
> --- a/ui/js/src/kimchi.network.js
> +++ b/ui/js/src/kimchi.network.js
> @@ -17,6 +17,8 @@
> */
>
> kimchi.NETWORK_TYPE_MACVTAP = "macvtap";
> +kimchi.NETWORK_TYPE_BRIDGED = "bridge";
> +
>
> kimchi.initNetwork = function() {
> if(wok.tabMode['network'] === 'admin') {
> diff --git a/ui/js/src/kimchi.network_add_main.js
b/ui/js/src/kimchi.network_add_main.js
> index 76d436f..603a5ee 100644
> --- a/ui/js/src/kimchi.network_add_main.js
> +++ b/ui/js/src/kimchi.network_add_main.js
> @@ -31,20 +31,20 @@ kimchi.startNetworkCreation = function() {
> var network = kimchi.getNetworkDialogValues();
> var data = {
> name :network.name <http://network.name>;,
> - connection: network.type
> + connection: network.type,
> + interface: network.interface,
> + vlan_id: network.vlan_id
> };
> - if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
> - data.connection = "macvtap";
> - data.interface = network.interface;
> - if ($("#enableVlan").prop("checked")) {
> +
> + if (network.type === kimchi.NETWORK_TYPE_BRIDGED &&
$("#enableVlan").prop("checked")) {
> data.vlan_id = network.vlan_id;
> if (!(data.vlan_id >=1 && data.vlan_id <= 4094)) {
> wok.message.error.code('KCHNET6001E');
> errorCallback();
> return;
> }
> - }
> }
> +
> kimchi.createNetwork(data, function(result) {
> network.state = result.state === "active" ? "up" :
"down";
> network.interface = result.interface ? result.interface :
i18n["KCHNET6001M"];
> @@ -59,30 +59,8 @@ kimchi.startNetworkCreation = function() {
> };
>
> kimchi.openNetworkDialog = function(okCallback) {
> - kimchi.getInterfaces(function(result) {
> - var options = [];
> - $selectDestination = $('#networkDestinationID');
> - var nics = {};
> - var selectDestinationOptionHTML = '';
> - for (var i = 0; i < result.length; i++) {
> - options.push({label:result[i].name,value:result[i].name});
> - nics[result[i].name] = result[i];
> - selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
> - }
> - $selectDestination.append(selectDestinationOptionHTML);
> - $selectDestination.selectpicker();
> - onChange = function() {
> - if (result.length>0 && $selectDestination.val() !==
"") {
> - $("#enableVlan").prop("disabled",false);
> - $("#networkVlanID").val("");
> - } else {
> - $("#enableVlan").prop("disabled",true);
> - }
> - };
> - $("#networkDestinationID").on("change", onChange);
> - kimchi.setDefaultNetworkType(result.length!==0);
> - onChange();
> - });
> + kimchi.loadInterfaces();
> +
> $("#networkFormOk").on("click", function() {
> $("#networkFormOk").button("disable");
> $("#networkName").prop("readonly",
"readonly"); @@ -98,28 +76,10 @@ kimchi.openNetworkDialog =
> function(okCallback) { }); }; -kimchi.enableBridgeOptions =
> function(enable) { - $("
>
<mailto:%29;@@-98,28+76,10@@kimchi.openNetworkDialog=function%28okCallback%29%7B%7D%29;%7D;-kimchi.enableBridgeOptions=function%28enable%29%7B-$%28>#enableVlan").prop("checked",
false);
> - $("#networkVlanID").val("");
> - if (enable) {
> - $('#bridgedContent').slideDown(300);
> - $('#enableVlan').prop("disabled", false);
> - $('#networkVlanID').prop("disabled", true);
> - } else {
> - $('#bridgedContent').slideUp(300);
> - $('#enableVlan').prop("disabled", true);
> - $('#networkVlanID').prop("disabled", true);
> - }
> -};
> -
> -
> kimchi.setDefaultNetworkType = function(isInterfaceAvail) {
> - $("#networkType").val('macvtap', isInterfaceAvail);
> - $("#networkType
option:contains('bridged')").prop("disabled", !isInterfaceAvail);
> - $("#networkType").val('nat', !isInterfaceAvail);
> $("#networkType").selectpicker();
> if (!isInterfaceAvail) {
> - kimchi.enableBridgeOptions(false);
> + kimchi.enableBridgeOptions2(false);
Why did you rename the function name to 'enableBridgedOptions*2*' ?
> $("#networkBriDisabledLabel").removeClass('hidden');
> } else {
> if (kimchi.capabilities && kimchi.capabilities.nm_running) {
> @@ -136,7 +96,12 @@ kimchi.getNetworkDialogValues = function() {
> };
> if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
> network.interface = $("#networkDestinationID").val();
> - network.vlan_id = parseInt($("#networkVlanID").val());
> + }
> + if (network.type === kimchi.NETWORK_TYPE_BRIDGED) {
> + network.interface = $("#networkDestinationID").val();
> + if (network.interface === 'nic' || network.interface ===
'bonding') {
> + network.vlan_id = parseInt($("#networkVlanID").val());
> + }
> }
The VLAN information is associated with a macvtap bridge not with
a Linux brigde.
The current bridged UI (ie, macvtap) needs to keep the same.
We will only add a new option "Linux bridged" which will also list
the interface combo box but without the VLAN configuration.
> return network;
> };
> @@ -147,14 +112,26 @@ kimchi.setupNetworkFormEvent = function() {
> $("#networkName").toggleClass("invalid-field",
!$("#networkName").val().match(/^[^\"\/]+$/));
> kimchi.updateNetworkFormButton();
> });
> - $('#networkType').on('change', function() {
> - var selectedType = $(this).val();
> +
> + $('#networkType, #networkDestinationID').on('change',
function() {
> + var selectedType = $("#networkType").val();
> + var selectedDestination = $("#networkDestinationID").val();
> if(selectedType == 'isolated' || selectedType ==
'nat') {
> - kimchi.enableBridgeOptions(false);
> - } else if (selectedType == 'macvtap') {
> - kimchi.enableBridgeOptions(true);
> + kimchi.enableBridgeOptions2(false);
> + } else {
> + kimchi.enableBridgeOptions2(true, selectedType,
selectedDestination);
> }
> +
> });
> +
> + $('#networkType').on('change', function() {
> + var selectedType = $("#networkType").val();
> + if(selectedType === kimchi.NETWORK_TYPE_MACVTAP) {
> + kimchi.loadInterfaces(new Array("nic",
"bonding"));
> + } else {
> + kimchi.loadInterfaces();
> + }
> + });
> };
>
> kimchi.updateNetworkFormButton = function() {
> @@ -164,3 +141,62 @@ kimchi.updateNetworkFormButton = function() {
> $("#networkFormOk").button("enable");
> }
> };
> +
> +kimchi.enableBridgeOptions2 = function(enable, networkType, networkDestination)
{
> + $("#enableVlan").prop("checked", false);
> + $("#networkVlanID").val("");
> + $('#vlan').hide();
> + if (enable) {
> + $('#bridgedContent').slideDown(300);
> + $('#enableVlan').prop("disabled", false);
> + $('#networkVlanID').prop("disabled", true);
> + if (networkType === kimchi.NETWORK_TYPE_BRIDGED &&
(networkDestination === 'nic' || networkDestination === 'bonding')) {
> + $('#vlan').show();
> + }
> + } else {
> + $('#bridgedContent').slideUp(300);
> + $('#enableVlan').prop("disabled", true);
> + $('#networkVlanID').prop("disabled", true);
> + };
> +
> +};
> +
> +kimchi.loadInterfaces = function(interfaceFilterArray) {
> + kimchi.getInterfaces(function(result) {
> +
> + var options = [];
> + $selectDestination = $('#networkDestinationID');
> + var nics = {};
> + $('#networkDestinationID').find('option').remove();
> + var selectDestinationOptionHTML = '';
> + for (var i = 0; i < result.length; i++) {
> + if (typeof interfaceFilterArray === 'undefined') {
> + options.push({label:result[i].name,value:result[i].name});
> + nics[result[i].name] = result[i];
> + selectDestinationOptionHTML += '<option
value="'+ result[i].name + '">' + result[i].name +
'</option>';
> + } else {
> + for (var k = 0; k < interfaceFilterArray.length; k++) {
> + if (result[i].type == interfaceFilterArray[k]) {
> +
options.push({label:result[i].name,value:result[i].name});
> + nics[result[i].name] = result[i];
> + selectDestinationOptionHTML += '<option
value="'+ result[i].name + '">' + result[i].name +
'</option>';
> + }
> + }
> + }
> +
> + }
> + $selectDestination.append(selectDestinationOptionHTML);
> + $('#networkDestinationID').selectpicker('refresh');
> + onChange = function() {
> + if (result.length>0 && $selectDestination.val() !==
"") {
> + $("#enableVlan").prop("disabled",false);
> + $("#networkVlanID").val("");
> + } else {
> + $("#enableVlan").prop("disabled",true);
> + }
> + };
> + kimchi.setDefaultNetworkType(result.length!==0);
> + onChange();
> + });
> +};
> +
> diff --git a/ui/pages/network-add.html.tmpl b/ui/pages/network-add.html.tmpl
> index 7158b75..b1f3e21 100644
> --- a/ui/pages/network-add.html.tmpl
> +++ b/ui/pages/network-add.html.tmpl
> @@ -41,6 +41,7 @@
> <option value="isolated">$_("Isolated: no
external network connection")</option>
> <option value="nat">$_("NAT: outbound
physical network connection only")</option>
> <option value="macvtap">$_("Bridged:
Virtual machines are connected to physical network directly")</option>
> + <option value="bridge">$_("Linux bridges
and OVS bridges")</option>
Please, use: "Linux bridged: Virtual machines are connected
through a network bridge"
> </select>
> </div>
> <div id="networkBriDisabledLabel" class="form-group
hidden">
> @@ -52,7 +53,7 @@
> <select id="networkDestinationID"
class="selectpicker col-md-12 col-lg-12">
> </select>
> </div>
> - <div class="form-group">
> + <div class="form-group" id="vlan">
> <input id="enableVlan"
class="wok-checkbox" type="checkbox" value="" />
> <label for="enableVlan"
id="labelEnableVlan">$_("Enable VLAN") </label>
> <div id="vlan-enabled">
Also every time, I change the network type on combo box a new
warning message about the Network Manager is appended in the dialog.
It happened to have 4 messages in a time.
5:47 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
On 04-02-2016 12:38, Peter Pennings wrote:
*- Please, use: "Linux bridged: Virtual machines are connected
through a
network bridge"*
*
*
Ok, I will do it.
Since bridged will also be used for OVS bridges, I believe it's better
to use:
"Bridged: Virtual machines are connected through a network bridge"
--
Lucio Correia
Software Engineer
IBM LTC Brazil
6:38 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
I will run some tests now with this and send more comments afterwards.
Here are my review comments. Additional comments in the code.
There are some whitespace errors appliying this patch:
/home/lucio/ibm/projects/kimchi-ginger/src/public/wok/.git/modules/src/wok/plugins/kimchi/rebase-apply/patch:159:
trailing whitespace.
kimchi.enableBridgeOptions2(true, selectedType,
selectedDestination);
/home/lucio/ibm/projects/kimchi-ginger/src/public/wok/.git/modules/src/wok/plugins/kimchi/rebase-apply/patch:161:
trailing whitespace.
/home/lucio/ibm/projects/kimchi-ginger/src/public/wok/.git/modules/src/wok/plugins/kimchi/rebase-apply/patch:171:
trailing whitespace.
});
/home/lucio/ibm/projects/kimchi-ginger/src/public/wok/.git/modules/src/wok/plugins/kimchi/rebase-apply/patch:183:
trailing whitespace.
$('#vlan').hide();
/home/lucio/ibm/projects/kimchi-ginger/src/public/wok/.git/modules/src/wok/plugins/kimchi/rebase-apply/patch:190:
trailing whitespace.
}
warning: squelched 5 whitespace errors
warning: 10 lines add whitespace errors.
On 03-02-2016 14:41, peterpnns(a)gmail.com wrote:
From: peterpennings <peterpnns(a)gmail.com>
This commit adds the new UI changes for network bridges and enables OVS bridges that
where temporary hidden
Signed-off-by: peterpennings <peterpnns(a)gmail.com>
---
netinfo.py | 3 +-
ui/js/src/kimchi.network.js | 2 +
ui/js/src/kimchi.network_add_main.js | 146 ++++++++++++++++++++++-------------
ui/pages/network-add.html.tmpl | 3 +-
4 files changed, 96 insertions(+), 58 deletions(-)
diff --git a/netinfo.py b/netinfo.py
index 2d83466..c00f603 100644
--- a/netinfo.py
+++ b/netinfo.py
@@ -221,8 +221,7 @@ def is_bare_nic(iface):
# a slave of bond.
# The bridge will not be exposed when all it's port are tap.
def all_favored_interfaces():
- return list(set(aggregated_bridges() + bare_nics() + bondings()) -
- set(ovs_bridges()))
+ return aggregated_bridges() + bare_nics() + bondings()
def get_interface_type(iface):
diff --git a/ui/js/src/kimchi.network.js b/ui/js/src/kimchi.network.js
index 923aeb9..96c3fea 100644
--- a/ui/js/src/kimchi.network.js
+++ b/ui/js/src/kimchi.network.js
@@ -17,6 +17,8 @@
*/
kimchi.NETWORK_TYPE_MACVTAP = "macvtap";
+kimchi.NETWORK_TYPE_BRIDGED = "bridge";
"bridged" would be
better here
+
kimchi.initNetwork = function() {
if(wok.tabMode['network'] === 'admin') {
diff --git a/ui/js/src/kimchi.network_add_main.js b/ui/js/src/kimchi.network_add_main.js
index 76d436f..603a5ee 100644
--- a/ui/js/src/kimchi.network_add_main.js
+++ b/ui/js/src/kimchi.network_add_main.js
@@ -31,20 +31,20 @@ kimchi.startNetworkCreation = function() {
var network = kimchi.getNetworkDialogValues();
var data = {
name : network.name,
- connection: network.type
+ connection: network.type,
+ interface: network.interface,
+ vlan_id: network.vlan_id
};
- if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
- data.connection = "macvtap";
- data.interface = network.interface;
- if ($("#enableVlan").prop("checked")) {
+
+ if (network.type === kimchi.NETWORK_TYPE_BRIDGED &&
$("#enableVlan").prop("checked")) {
data.vlan_id = network.vlan_id;
2 levels of indentation here...
please reduce to 1
if (!(data.vlan_id >=1 && data.vlan_id <=
4094)) {
wok.message.error.code('KCHNET6001E');
errorCallback();
return;
}
- }
}
+
kimchi.createNetwork(data, function(result) {
network.state = result.state === "active" ? "up" :
"down";
network.interface = result.interface ? result.interface :
i18n["KCHNET6001M"];
@@ -59,30 +59,8 @@ kimchi.startNetworkCreation = function() {
};
kimchi.openNetworkDialog = function(okCallback) {
- kimchi.getInterfaces(function(result) {
- var options = [];
- $selectDestination = $('#networkDestinationID');
- var nics = {};
- var selectDestinationOptionHTML = '';
- for (var i = 0; i < result.length; i++) {
- options.push({label:result[i].name,value:result[i].name});
- nics[result[i].name] = result[i];
- selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
- }
- $selectDestination.append(selectDestinationOptionHTML);
- $selectDestination.selectpicker();
- onChange = function() {
- if (result.length>0 && $selectDestination.val() !== "")
{
- $("#enableVlan").prop("disabled",false);
- $("#networkVlanID").val("");
- } else {
- $("#enableVlan").prop("disabled",true);
- }
- };
- $("#networkDestinationID").on("change", onChange);
- kimchi.setDefaultNetworkType(result.length!==0);
- onChange();
- });
+ kimchi.loadInterfaces();
+
$("#networkFormOk").on("click", function() {
$("#networkFormOk").button("disable");
$("#networkName").prop("readonly", "readonly");
@@ -98,28 +76,10 @@ kimchi.openNetworkDialog = function(okCallback) {
});
};
-kimchi.enableBridgeOptions = function(enable) {
- $("#enableVlan").prop("checked", false);
- $("#networkVlanID").val("");
- if (enable) {
- $('#bridgedContent').slideDown(300);
- $('#enableVlan').prop("disabled", false);
- $('#networkVlanID').prop("disabled", true);
- } else {
- $('#bridgedContent').slideUp(300);
- $('#enableVlan').prop("disabled", true);
- $('#networkVlanID').prop("disabled", true);
- }
-};
-
-
kimchi.setDefaultNetworkType = function(isInterfaceAvail) {
- $("#networkType").val('macvtap', isInterfaceAvail);
- $("#networkType
option:contains('bridged')").prop("disabled", !isInterfaceAvail);
- $("#networkType").val('nat', !isInterfaceAvail);
$("#networkType").selectpicker();
if (!isInterfaceAvail) {
- kimchi.enableBridgeOptions(false);
+ kimchi.enableBridgeOptions2(false);
$("#networkBriDisabledLabel").removeClass('hidden');
} else {
if (kimchi.capabilities && kimchi.capabilities.nm_running) {
@@ -136,7 +96,12 @@ kimchi.getNetworkDialogValues = function() {
};
if (network.type === kimchi.NETWORK_TYPE_MACVTAP) {
network.interface = $("#networkDestinationID").val();
- network.vlan_id = parseInt($("#networkVlanID").val());
+ }
+ if (network.type === kimchi.NETWORK_TYPE_BRIDGED) {
+ network.interface = $("#networkDestinationID").val();
+ if (network.interface === 'nic' || network.interface ===
'bonding') {
+ network.vlan_id = parseInt($("#networkVlanID").val());
+ }
}
return network;
};
@@ -147,14 +112,26 @@ kimchi.setupNetworkFormEvent = function() {
$("#networkName").toggleClass("invalid-field",
!$("#networkName").val().match(/^[^\"\/]+$/));
kimchi.updateNetworkFormButton();
});
- $('#networkType').on('change', function() {
- var selectedType = $(this).val();
+
+ $('#networkType, #networkDestinationID').on('change', function() {
+ var selectedType = $("#networkType").val();
+ var selectedDestination = $("#networkDestinationID").val();
if(selectedType == 'isolated' || selectedType == 'nat') {
- kimchi.enableBridgeOptions(false);
- } else if (selectedType == 'macvtap') {
- kimchi.enableBridgeOptions(true);
+ kimchi.enableBridgeOptions2(false);
+ } else {
+ kimchi.enableBridgeOptions2(true, selectedType, selectedDestination);
}
+
});
+
+ $('#networkType').on('change', function() {
+ var selectedType = $("#networkType").val();
+ if(selectedType === kimchi.NETWORK_TYPE_MACVTAP) {
+ kimchi.loadInterfaces(new Array("nic", "bonding"));
+ } else {
+ kimchi.loadInterfaces();
+ }
+ });
};
kimchi.updateNetworkFormButton = function() {
@@ -164,3 +141,62 @@ kimchi.updateNetworkFormButton = function() {
$("#networkFormOk").button("enable");
}
};
+
+kimchi.enableBridgeOptions2 = function(enable, networkType, networkDestination) {
+ $("#enableVlan").prop("checked", false);
+ $("#networkVlanID").val("");
+ $('#vlan').hide();
+ if (enable) {
+ $('#bridgedContent').slideDown(300);
+ $('#enableVlan').prop("disabled", false);
+ $('#networkVlanID').prop("disabled", true);
+ if (networkType === kimchi.NETWORK_TYPE_BRIDGED && (networkDestination
=== 'nic' || networkDestination === 'bonding')) {
+ $('#vlan').show();
+ }
+ } else {
+ $('#bridgedContent').slideUp(300);
+ $('#enableVlan').prop("disabled", true);
+ $('#networkVlanID').prop("disabled", true);
+ };
+
+};
+
+kimchi.loadInterfaces = function(interfaceFilterArray) {
+ kimchi.getInterfaces(function(result) {
+
+ var options = [];
+ $selectDestination = $('#networkDestinationID');
+ var nics = {};
+ $('#networkDestinationID').find('option').remove();
+ var selectDestinationOptionHTML = '';
+ for (var i = 0; i < result.length; i++) {
+ if (typeof interfaceFilterArray === 'undefined') {
+ options.push({label:result[i].name,value:result[i].name});
+ nics[result[i].name] = result[i];
+ selectDestinationOptionHTML += '<option value="'+
result[i].name + '">' + result[i].name + '</option>';
+ } else {
+ for (var k = 0; k < interfaceFilterArray.length; k++) {
+ if (result[i].type == interfaceFilterArray[k]) {
+ options.push({label:result[i].name,value:result[i].name});
+ nics[result[i].name] = result[i];
+ selectDestinationOptionHTML += '<option
value="'+ result[i].name + '">' + result[i].name +
'</option>';
+ }
+ }
+ }
+
+ }
+ $selectDestination.append(selectDestinationOptionHTML);
+ $('#networkDestinationID').selectpicker('refresh');
+ onChange = function() {
+ if (result.length>0 && $selectDestination.val() !== "")
{
+ $("#enableVlan").prop("disabled",false);
+ $("#networkVlanID").val("");
+ } else {
+ $("#enableVlan").prop("disabled",true);
+ }
+ };
+ kimchi.setDefaultNetworkType(result.length!==0);
+ onChange();
+ });
+};
+
diff --git a/ui/pages/network-add.html.tmpl b/ui/pages/network-add.html.tmpl
index 7158b75..b1f3e21 100644
--- a/ui/pages/network-add.html.tmpl
+++ b/ui/pages/network-add.html.tmpl
@@ -41,6 +41,7 @@
<option value="isolated">$_("Isolated: no external
network connection")</option>
<option value="nat">$_("NAT: outbound physical
network connection only")</option>
<option value="macvtap">$_("Bridged: Virtual
machines are connected to physical network directly")</option>
+ <option value="bridge">$_("Linux bridges and OVS
bridges")</option>
Please update descriptions here and use
"bridged" for last option value=
</select>
</div>
<div id="networkBriDisabledLabel" class="form-group
hidden">
@@ -52,7 +53,7 @@
<select id="networkDestinationID"
class="selectpicker col-md-12 col-lg-12">
</select>
</div>
- <div class="form-group">
+ <div class="form-group" id="vlan">
<input id="enableVlan" class="wok-checkbox"
type="checkbox" value="" />
<label for="enableVlan"
id="labelEnableVlan">$_("Enable VLAN") </label>
<div id="vlan-enabled">
--
Lucio Correia
Software Engineer
IBM LTC Brazil
7:13 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
On 04-02-2016 15:38, Lucio Correia wrote:
> <option
value="isolated">$_("Isolated: no external
> network connection")</option>
> <option value="nat">$_("NAT: outbound
physical
> network connection only")</option>
> <option value="macvtap">$_("Bridged: Virtual
> machines are connected to physical network directly")</option>
> + <option value="bridge">$_("Linux bridges and
OVS
> bridges")</option>
Please update descriptions here and use "bridged" for last option value=
For clarification:
"macvtap: Virtual machines are connected to physical network directly"
"bridged: Virtual machines are connected through a network bridge"
--
Lucio Correia
Software Engineer
IBM LTC Brazil
7:50 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
On 04-02-2016 15:38, Lucio Correia wrote:
I will run some tests now with this and send more comments
afterwards.
Here are my review comments. Additional comments in the code.
The only problem I noticed is that VLAN form is not being showed when I
select Linux and OVS bridges.
--
Lucio Correia
Software Engineer
IBM LTC Brazil
12:18 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
I followed bellow specifications, the VLAN form should be showed when a NIC
or bonding is selected. Is that not being showed?
https://github.com/kimchi-project/kimchi/issues/791
*Bridged option new behaviour:*
1) Change description of "Bridged" option to refer to Linux bridges and OVS
bridges (no more direct connections)
2) When "Bridged" is selected, "Destination" will show all the
interfaces
it currently shows plus OVS bridges
*3) "Enable VLAN" will only be showed if user selects a NIC or bonding from
"Destination" pop-up* (alternatively, we can show it always and block the
usage of VLAN with NIC or bonding selected)
4) "Bridged" option will call network_create API with "bridge" as
value for
"connection" parameter
*New macvtap option:*
5) Add a new option "macvtap" to Network Type, with same current
description of today's Bridged option
6) When macvtap option is selected, "Destination" will show only NICs and
bondings. It will NOT show any kind of bridges anymore.
*7) "Enable VLAN" option is NOT showed*
8) macvtap option will call network create API with "macvtap" as
"connection" parameter value.
I will send a V2 patch with the others corrections (function name and alert
messages). If V1 patch is not according with the above specifications,
please, let me know, then I can fix it.
Thanks
Peter
2016-02-04 16:50 GMT-02:00 Lucio Correia <luciojhc(a)linux.vnet.ibm.com>:
On 04-02-2016 15:38, Lucio Correia wrote:
> I will run some tests now with this and send more comments afterwards.
> Here are my review comments. Additional comments in the code.
>
The only problem I noticed is that VLAN form is not being showed when I
select Linux and OVS bridges.
--
Lucio Correia
Software Engineer
IBM LTC Brazil
_______________________________________________
Kimchi-devel mailing list
Kimchi-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/kimchi-devel
1:01 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
Hi Peter,
Even selecting a NIC interface, the VLAN option is not being displayed
for a Bridged network.
You can try it by yourself too.
On 02/05/2016 09:18 AM, Peter Pennings wrote:
I followed bellow specifications, the VLAN form should be showed when
a NIC or bonding is selected. Is that not being showed?
https://github.com/kimchi-project/kimchi/issues/791
*Bridged option new behaviour:*
1) Change description of "Bridged" option to refer to Linux bridges
and OVS bridges (no more direct connections)
2) When "Bridged" is selected, "Destination" will show all the
interfaces it currently shows plus OVS bridges
*3) "Enable VLAN" will only be showed if user selects a NIC or bonding
from "Destination" pop-up*(alternatively, we can show it always and
block the usage of VLAN with NIC or bonding selected)
4) "Bridged" option will call network_create API with "bridge" as
value for "connection" parameter
*New macvtap option:*
5) Add a new option "macvtap" to Network Type, with same current
description of today's Bridged option
6) When macvtap option is selected, "Destination" will show only NICs
and bondings. It will NOT show any kind of bridges anymore.
*7) "Enable VLAN" option is NOT showed*
8) macvtap option will call network create API with "macvtap" as
"connection" parameter value.
I will send a V2 patch with the others corrections (function name and
alert messages). If V1 patch is not according with the above
specifications, please, let me know, then I can fix it.
Thanks
Peter
2016-02-04 16:50 GMT-02:00 Lucio Correia <luciojhc(a)linux.vnet.ibm.com
<mailto:luciojhc@linux.vnet.ibm.com>>:
On 04-02-2016 15:38, Lucio Correia wrote:
I will run some tests now with this and send more comments
afterwards.
Here are my review comments. Additional comments in the code.
The only problem I noticed is that VLAN form is not being showed
when I select Linux and OVS bridges.
--
Lucio Correia
Software Engineer
IBM LTC Brazil
_______________________________________________
Kimchi-devel mailing list
Kimchi-devel(a)ovirt.org <mailto:Kimchi-devel@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/kimchi-devel
_______________________________________________
Kimchi-devel mailing list
Kimchi-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/kimchi-devel
6:12 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
Hi
I'm working on a V2 patch for this issue and I have one doubt.
Now, I'm showing the VLAN option when a bridged is selected with a NIC or
bonding interface. In this case, the VLAN ID is required or can be empty? I
guess backend is validating this and turned this field obrigatory.
Thanks
Peter
2016-02-05 10:01 GMT-02:00 Aline Manera <alinefm(a)linux.vnet.ibm.com>:
Hi Peter,
Even selecting a NIC interface, the VLAN option is not being displayed for
a Bridged network.
You can try it by yourself too.
On 02/05/2016 09:18 AM, Peter Pennings wrote:
I followed bellow specifications, the VLAN form should be showed when a
NIC or bonding is selected. Is that not being showed?
https://github.com/kimchi-project/kimchi/issues/791
*Bridged option new behaviour:*
1) Change description of "Bridged" option to refer to Linux bridges and
OVS bridges (no more direct connections)
2) When "Bridged" is selected, "Destination" will show all the
interfaces
it currently shows plus OVS bridges
*3) "Enable VLAN" will only be showed if user selects a NIC or bonding
from "Destination" pop-up* (alternatively, we can show it always and
block the usage of VLAN with NIC or bonding selected)
4) "Bridged" option will call network_create API with "bridge" as
value
for "connection" parameter
*New macvtap option:*
5) Add a new option "macvtap" to Network Type, with same current
description of today's Bridged option
6) When macvtap option is selected, "Destination" will show only NICs and
bondings. It will NOT show any kind of bridges anymore.
*7) "Enable VLAN" option is NOT showed*
8) macvtap option will call network create API with "macvtap" as
"connection" parameter value.
I will send a V2 patch with the others corrections (function name and
alert messages). If V1 patch is not according with the above
specifications, please, let me know, then I can fix it.
Thanks
Peter
2016-02-04 16:50 GMT-02:00 Lucio Correia <luciojhc(a)linux.vnet.ibm.com>:
> On 04-02-2016 15:38, Lucio Correia wrote:
>
>> I will run some tests now with this and send more comments afterwards.
>> Here are my review comments. Additional comments in the code.
>>
>
> The only problem I noticed is that VLAN form is not being showed when I
> select Linux and OVS bridges.
>
>
> --
> Lucio Correia
> Software Engineer
> IBM LTC Brazil
>
> _______________________________________________
> Kimchi-devel mailing list
> Kimchi-devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/kimchi-devel
>
_______________________________________________
Kimchi-devel mailing
listKimchi-devel@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/kimchi-devel
6:36 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
On 02/05/2016 03:12 PM, Peter Pennings wrote:
Hi
I'm working on a V2 patch for this issue and I have one doubt.
Now, I'm showing the VLAN option when a bridged is selected with a NIC
or bonding interface. In this case, the VLAN ID is required or can be
empty? I guess backend is validating this and turned this field
obrigatory.
When VLAN is selected, a VLAN tag is required.
Thanks
Peter
2016-02-05 10:01 GMT-02:00 Aline Manera <alinefm(a)linux.vnet.ibm.com
<mailto:alinefm@linux.vnet.ibm.com>>:
Hi Peter,
Even selecting a NIC interface, the VLAN option is not being
displayed for a Bridged network.
You can try it by yourself too.
On 02/05/2016 09:18 AM, Peter Pennings wrote:
> I followed bellow specifications, the VLAN form should be showed
> when a NIC or bonding is selected. Is that not being showed?
>
> https://github.com/kimchi-project/kimchi/issues/791
>
> *Bridged option new behaviour:*
> 1) Change description of "Bridged" option to refer to Linux
> bridges and OVS bridges (no more direct connections)
> 2) When "Bridged" is selected, "Destination" will show all
the
> interfaces it currently shows plus OVS bridges
> *3) "Enable VLAN" will only be showed if user selects a NIC or
> bonding from "Destination" pop-up*(alternatively, we can show it
> always and block the usage of VLAN with NIC or bonding selected)
> 4) "Bridged" option will call network_create API with
"bridge" as
> value for "connection" parameter
>
> *New macvtap option:*
> 5) Add a new option "macvtap" to Network Type, with same current
> description of today's Bridged option
> 6) When macvtap option is selected, "Destination" will show only
> NICs and bondings. It will NOT show any kind of bridges anymore.
> *7) "Enable VLAN" option is NOT showed*
> 8) macvtap option will call network create API with "macvtap" as
> "connection" parameter value.
>
>
> I will send a V2 patch with the others corrections (function name
> and alert messages). If V1 patch is not according with the above
> specifications, please, let me know, then I can fix it.
>
>
> Thanks
>
>
> Peter
>
>
> 2016-02-04 16:50 GMT-02:00 Lucio Correia
> <luciojhc(a)linux.vnet.ibm.com <mailto:luciojhc@linux.vnet.ibm.com>>:
>
> On 04-02-2016 15:38, Lucio Correia wrote:
>
> I will run some tests now with this and send more
> comments afterwards.
> Here are my review comments. Additional comments in the code.
>
>
> The only problem I noticed is that VLAN form is not being
> showed when I select Linux and OVS bridges.
>
>
> --
> Lucio Correia
> Software Engineer
> IBM LTC Brazil
>
> _______________________________________________
> Kimchi-devel mailing list
> Kimchi-devel(a)ovirt.org <mailto:Kimchi-devel@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/kimchi-devel
>
>
>
>
> _______________________________________________
> Kimchi-devel mailing list
> Kimchi-devel(a)ovirt.org <mailto:Kimchi-devel@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/kimchi-devel
6:57 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
Aline,
Even when the VLAN checkbox is not selected, the backend is validating the
VLAN ID field. If the VLAN ID is required for bridged with nic or bonding
interface, I don't see a reason for a checkbox in the UI.
2016-02-05 15:36 GMT-02:00 Aline Manera <alinefm(a)linux.vnet.ibm.com>:
On 02/05/2016 03:12 PM, Peter Pennings wrote:
Hi
I'm working on a V2 patch for this issue and I have one doubt.
Now, I'm showing the VLAN option when a bridged is selected with a NIC or
bonding interface. In this case, the VLAN ID is required or can be empty? I
guess backend is validating this and turned this field obrigatory.
When VLAN is selected, a VLAN tag is required.
Thanks
Peter
2016-02-05 10:01 GMT-02:00 Aline Manera <alinefm(a)linux.vnet.ibm.com>:
>
> Hi Peter,
>
> Even selecting a NIC interface, the VLAN option is not being displayed
> for a Bridged network.
>
> You can try it by yourself too.
>
>
> On 02/05/2016 09:18 AM, Peter Pennings wrote:
>
> I followed bellow specifications, the VLAN form should be showed when a
> NIC or bonding is selected. Is that not being showed?
>
> https://github.com/kimchi-project/kimchi/issues/791
>
> *Bridged option new behaviour:*
> 1) Change description of "Bridged" option to refer to Linux bridges and
> OVS bridges (no more direct connections)
> 2) When "Bridged" is selected, "Destination" will show all the
interfaces
> it currently shows plus OVS bridges
> *3) "Enable VLAN" will only be showed if user selects a NIC or bonding
> from "Destination" pop-up* (alternatively, we can show it always and
> block the usage of VLAN with NIC or bonding selected)
> 4) "Bridged" option will call network_create API with "bridge" as
value
> for "connection" parameter
>
> *New macvtap option:*
> 5) Add a new option "macvtap" to Network Type, with same current
> description of today's Bridged option
> 6) When macvtap option is selected, "Destination" will show only NICs and
> bondings. It will NOT show any kind of bridges anymore.
> *7) "Enable VLAN" option is NOT showed*
> 8) macvtap option will call network create API with "macvtap" as
> "connection" parameter value.
>
>
> I will send a V2 patch with the others corrections (function name and
> alert messages). If V1 patch is not according with the above
> specifications, please, let me know, then I can fix it.
>
>
> Thanks
>
>
> Peter
>
> 2016-02-04 16:50 GMT-02:00 Lucio Correia < <luciojhc(a)linux.vnet.ibm.com>
> luciojhc(a)linux.vnet.ibm.com>:
>
>> On 04-02-2016 15:38, Lucio Correia wrote:
>>
>>> I will run some tests now with this and send more comments afterwards.
>>> Here are my review comments. Additional comments in the code.
>>>
>>
>> The only problem I noticed is that VLAN form is not being showed when I
>> select Linux and OVS bridges.
>>
>>
>> --
>> Lucio Correia
>> Software Engineer
>> IBM LTC Brazil
>>
>> _______________________________________________
>> Kimchi-devel mailing list
>> Kimchi-devel(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/kimchi-devel
>>
>
>
>
> _______________________________________________
> Kimchi-devel mailing
listKimchi-devel@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/kimchi-devel
>
>
>
7:50 p.m.
New subject: [PATCH] [Kimchi] Issue #791: New UI for adding network bridges
On 02/05/2016 03:57 PM, Peter Pennings wrote:
Aline,
Even when the VLAN checkbox is not selected, the backend is validating
the VLAN ID field.
It should not be true! The VLAN ID is not required to create a bridged
network.
If the VLAN ID is required for bridged with nic or bonding interface,
I don't see a reason for a checkbox in the UI.
2016-02-05 15:36 GMT-02:00 Aline Manera <alinefm(a)linux.vnet.ibm.com
<mailto:alinefm@linux.vnet.ibm.com>>:
On 02/05/2016 03:12 PM, Peter Pennings wrote:
> Hi
>
> I'm working on a V2 patch for this issue and I have one doubt.
> Now, I'm showing the VLAN option when a bridged is selected with
> a NIC or bonding interface. In this case, the VLAN ID is required
> or can be empty? I guess backend is validating this and turned
> this field obrigatory.
>
When VLAN is selected, a VLAN tag is required.
> Thanks
>
> Peter
>
> 2016-02-05 10:01 GMT-02:00 Aline Manera
> <alinefm(a)linux.vnet.ibm.com <mailto:alinefm@linux.vnet.ibm.com>>:
>
>
> Hi Peter,
>
> Even selecting a NIC interface, the VLAN option is not being
> displayed for a Bridged network.
>
> You can try it by yourself too.
>
>
> On 02/05/2016 09:18 AM, Peter Pennings wrote:
>> I followed bellow specifications, the VLAN form should be
>> showed when a NIC or bonding is selected. Is that not being
>> showed?
>>
>> https://github.com/kimchi-project/kimchi/issues/791
>>
>> *Bridged option new behaviour:*
>> 1) Change description of "Bridged" option to refer to Linux
>> bridges and OVS bridges (no more direct connections)
>> 2) When "Bridged" is selected, "Destination" will
show all
>> the interfaces it currently shows plus OVS bridges
>> *3) "Enable VLAN" will only be showed if user selects a NIC
>> or bonding from "Destination" pop-up*(alternatively, we can
>> show it always and block the usage of VLAN with NIC or
>> bonding selected)
>> 4) "Bridged" option will call network_create API with
>> "bridge" as value for "connection" parameter
>>
>> *New macvtap option:*
>> 5) Add a new option "macvtap" to Network Type, with same
>> current description of today's Bridged option
>> 6) When macvtap option is selected, "Destination" will show
>> only NICs and bondings. It will NOT show any kind of bridges
>> anymore.
>> *7) "Enable VLAN" option is NOT showed*
>> 8) macvtap option will call network create API with
>> "macvtap" as "connection" parameter value.
>>
>>
>> I will send a V2 patch with the others corrections (function
>> name and alert messages). If V1 patch is not according with
>> the above specifications, please, let me know, then I can
>> fix it.
>>
>>
>> Thanks
>>
>>
>> Peter
>>
>>
>> 2016-02-04 16:50 GMT-02:00 Lucio Correia
>> <luciojhc(a)linux.vnet.ibm.com
>> <mailto:luciojhc@linux.vnet.ibm.com>>:
>>
>> On 04-02-2016 15:38, Lucio Correia wrote:
>>
>> I will run some tests now with this and send more
>> comments afterwards.
>> Here are my review comments. Additional comments in
>> the code.
>>
>>
>> The only problem I noticed is that VLAN form is not
>> being showed when I select Linux and OVS bridges.
>>
>>
>> --
>> Lucio Correia
>> Software Engineer
>> IBM LTC Brazil
>>
>> _______________________________________________
>> Kimchi-devel mailing list
>> Kimchi-devel(a)ovirt.org <mailto:Kimchi-devel@ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/kimchi-devel
>>
>>
>>
>>
>> _______________________________________________
>> Kimchi-devel mailing list
>> Kimchi-devel(a)ovirt.org <mailto:Kimchi-devel@ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/kimchi-devel
>
>
8:44 p.m.
New subject: New UI for adding network bridges
Applied. Thanks.
Regards,
Aline Manera
3003
days inactive
3010
days old
15 comments
4 participants
participants (4)
-
Aline Manera -
Lucio Correia -
Peter Pennings -
peterpnns＠gmail.com