Out-of-sync networks can only be detached
by Sakhi Hadebe
Hi,
I have a 3-node oVirt cluster. I have configured 2 logical networks:
ovirtmgmt and public. Public logical network is attached in only 2 nodes
and failing to attach on the 3rd node with the below error
Invalid operation, out-of-sync network 'public' can only be detached.
Please have been stuck on this for almost the whole day now. How do I fix
this error?
--
Regards,
Sakhi Hadebe
1 month
Network Address Change
by Paul.LKW
Hi All:
I just has a case, I need to change the oVirt host and engine IP address
due to data center decommission I checked in the hosted-engine host
there are some files I could change ;
in ovirt-hosted-engine/hosted-engine.conf
ca_subject="O=simple.com, CN=1.2.3.4"
gateway=1.2.3.254
and of course I need to change the ovirtmgmt interface IP too, I think
just change the above line could do the tick, but where could I change
the other host IP in the cluster ?
I think I have to be lost all the host as once changed the hosted-engine
host IP as it is in diff. sub net.
Does there any command line tools could do that or someone has such
experience could share?
Best Regards,
Paul.LKW
3 months
OVS switch type for hosted-engine
by Devin A. Bougie
Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated.
Many thanks,
Devin
10 months, 4 weeks
USB3 redirection
by Rik Theys
Hi,
I'm trying to assign a USB3 controller to a CentOS 7.4 VM in oVirt 4.1
with USB redirection enabled.
I've created the following file in /etc/ovirt-engine/osinfo.conf.d:
01-usb.properties with content
os.other.devices.usb.controller.value = nec-xhci
and have restarted ovirt-engine.
If I disable USB-support in the web interface for the VM, the xhci
controller is added to the VM (I can see it in the qemu-kvm
commandline), but usb redirection is not available.
If I enable USB-support in the UI, no xhci controller is added (only 4
uhci controllers).
Is there a way to make the controllers for usb redirection xhci controllers?
Regards,
Rik
--
Rik Theys
System Engineer
KU Leuven - Dept. Elektrotechniek (ESAT)
Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee
+32(0)16/32.11.07
----------------------------------------------------------------
<<Any errors in spelling, tact or fact are transmission errors>>
11 months, 2 weeks
OVN routing and firewalling in oVirt
by Gianluca Cecchi
Hello,
how do we manage routing between different OVN networks in oVirt?
And between OVN networks and physical ones?
Based on architecture read here:
http://openvswitch.org/support/dist-docs/ovn-architecture.7.html
I see terms for logical routers and gateway routers respectively but how to
apply to oVirt configuration?
Do I have to choose between setting up a specialized VM or a physical one:
is it applicable/advisable to put on oVirt host itself the gateway
functionality?
Is there any security policy (like security groups in Openstack) to
implement?
Thanks,
Gianluca
11 months, 2 weeks
Install hosted-engine - Task Get local VM IP failed
by florentl
Hi all,
I try to install hosted-engine on node : ovirt-node-ng-4.2.3-0.20180518.
Every times I get stuck on :
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed":
true, "cmd": "virsh -r net-dhcp-leases default | grep -i
00:16:3e:6c:5a:91 | awk '{ print $5 }' | cut -f1 -d'/'", "delta":
"0:00:00.108872", "end": "2018-06-01 11:17:34.421769", "rc": 0, "start":
"2018-06-01 11:17:34.312897", "stderr": "", "stderr_lines": [],
"stdout": "", "stdout_lines": []}
I tried with static IP Address and with DHCP but both failed.
To be more specific, I installed three nodes, deployed glusterfs with
the wizard. I'm in a nested virtualization environment for this lab
(Vmware Esxi Hypervisor).
My node IP is : 192.168.176.40 / and I want the hosted-engine vm has
192.168.176.43.
Thanks,
Florent
1 year
Host needs to be reinstalled after configuring power management
by Andrew DeMaria
Hi,
I am running ovirt 4.3 and have found the following action item immediately
after configuring power management for a host:
Host needs to be reinstalled as important configuration changes were
applied on it.
The thing is - I've just freshly installed this host and it seems strange
that I need to reinstall it.
Is there a better way to install a host and configure power management
without having to reinstall it after?
Thanks,
Andrew
1 year, 1 month
Lots of storage.MailBox.SpmMailMonitor
by Fabrice Bacchella
My vdsm log files are huge:
-rw-r--r-- 1 vdsm kvm 1.8G Nov 22 11:32 vdsm.log
And this is juste half an hour of logs:
$ head -1 vdsm.log
2018-11-22 11:01:12,132+0100 ERROR (mailbox-spm) [storage.MailBox.SpmMailMonitor] mailbox 2 checksum failed, not clearing mailbox, clearing new mail (data='...lots of data', expected='\xa4\x06\x08\x00') (mailbox:612)
I just upgraded vdsm:
$ rpm -qi vdsm
Name : vdsm
Version : 4.20.43
1 year, 2 months
