engine-config -s UserSessionTimeOutInterval=X problem
by marek
ovirt 4.5.4, standalone engine, centos 8 stream
[root@ovirt ~]# engine-config -g UserSessionTimeOutInterval
Picked up JAVA_TOOL_OPTIONS: -Dcom.redhat.fips=false
UserSessionTimeOutInterval: 30 version: general
[root@ovirt ~]# engine-config -s UserSessionTimeOutInterval=60
Picked up JAVA_TOOL_OPTIONS: -Dcom.redhat.fips=false
Cannot set value 60 to key UserSessionTimeOutInterval.
any ideas where is the problem?
Marek
3 weeks, 3 days
Unable to upload or download iso via admin portal
by Igor Filipovic
Hi, I'm having a trouble on fresh 4.4.10.7 installation (on oracle linux), I'm not able to upload or download any file using storage domain upload image function. I've imported CA certificate and have tried on several browsers (firefow, chrome,edge), on different computers (and browsers are green - claiming that I'm securely connected), but I'm always getting error regarding CA certificate when I test connection, or when I try to upload ISO image. I've tried to upload ISO image via cli commands (upload_disk.py), and that scenario was successful, however this method It is not very convenient for my co-workers.
I have 5 physical hosts, one is dedicated to run ovirt-engine, and other 4 are kvm hypervisors. When I try to upload ISO this is what engine.log logs:
2023-04-08 11:00:28,339+02 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferImageStatusCommand] (default task-2) [f6b62add-0a0c-45ee-a985-a76171843382] Running command: TransferImageStatusCommand internal: false. Entities affected : ID: 1eb97088-b805-4616-af55-0ac9d1d7dfbe Type: SystemAction group CREATE_DISK with role type USER
2023-04-08 11:00:28,340+02 INFO [org.ovirt.engine.core.bll.storage.disk.image.ImageTransferUpdater] (default task-2) [f6b62add-0a0c-45ee-a985-a76171843382] Updating image transfer a78b18c5-e395-4c29-aa5c-15ffff8a1cb6 (image 4f758325-ac11-4071-a9fa-d180425e8604) phase to Paused by System (message: 'Sent 0MB')
2023-04-08 11:00:28,363+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-2) [f6b62add-0a0c-45ee-a985-a76171843382] EVENT_ID: UPLOAD_IMAGE_NETWORK_ERROR(1,062), Unable to upload image to disk 4f758325-ac11-4071-a9fa-d180425e8604 due to a network error. Ensure ovirt-engine's CA certificate is registered as a trusted CA in the browser. The certificate can be fetched from https://engine-dr.somedomain/ovirt-engine/services/pki-resource?resource=...
2023-04-08 11:00:28,363+02 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferImageStatusCommand] (default task-2) [f6b62add-0a0c-45ee-a985-a76171843382] Running command: TransferImageStatusCommand internal: false. Entities affected : ID: 1eb97088-b805-4616-af55-0ac9d1d7dfbe Type: SystemAction group CREATE_DISK with role type USER
Can you please point me in some direction to try to fix this?
Thanks, and best regards
Igor
4 weeks, 1 day
Processors compatibility matrix oVirt
by Jorge Visentini
Do you have any documentation or compatibility matrix between oVirt and
processors?
How can I know if a processor is compatible?
I ask because in the *lscpu* command I see 2 sockets, but in the *engine* I
only see 1 socket.
BR.
--
Att,
Jorge Visentini
+55 55 98432-9868
2 months
ovirt with rocky linux kvm
by cynthiaberbery@outlook.com
Hello,
after installing multiple machines as rocky linux, Ovirt was chosen to be used to manage this infra.
But adding these machines as "hosts" on ovirt always give:
Error while executing action: Cannot add Host. Connecting to host via SSH has failed, verify that the host is reachable (IP address, routable address etc.) You may refer to the engine.log file for further details.
Is rocky kvm supported on ovirt 4.3.10.4-1.el7?
Do you have any contact with a supporting company/team for ovirt to check their support plan?
2 months
engine-setup failing on 4.3.2 -> 4.3.3 fails during Engine schema refresh fail
by Edward Berger
I was trying to upgrade a hyperconverged oVirt hosted engine and failed in
the engine-setup command with these error and warnings.
...
[ INFO ] Creating/refreshing Engine database schema
[ ERROR ] schema.sh: FATAL: Cannot execute sql command:
--file=/usr/share/ovirt-engine/dbscripts/upgrade/04_03_0830_add_foreign_key_to_image_transfers.sql
[ ERROR ] Failed to execute stage 'Misc configuration': Engine schema
refresh failed
...
[ INFO ] Yum Verify: 16/16: ovirt-engine-tools.noarch 0:4.3.3.5-1.el7 - e
[WARNING] Rollback of DWH database postponed to Stage "Clean up"
[ INFO ] Rolling back database schema
...
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
Attaching engine-setup logfile.
2 months
Suggestion to switch to nightly
by Sandro Bonazzola
Hi,
As you probably noticed there were no regular releases after oVirt 4.5.4
<https://ovirt.org/release/4.5.4/> in December 2022.
Despite the calls to action to the community and to the companies involved
with oVirt, there have been no uptake of the leading of the oVirt project
yet.
The developers at Red Hat still dedicating time to the project are now
facing the fact they lack the time to do formal releases despite they keep
fixing platform regressions like the recent ones due to the new ansible
changes. That makes a nightly snapshot setup a more stable environment than
oVirt 4.5.4.
For this reason, we would like to suggest the user community to enable
nightly repositories for oVirt by following the procedure at:
https://www.ovirt.org/develop/dev-process/install-nightly-snapshot.html
This will ensure that the latest fixes for the platform regressions will be
promptly available.
Regards,
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING - Red Hat In-Vehicle Operating System
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
2 months, 2 weeks
GPU Passthrough issues with oVirt 4.5
by Vinícius Ferrão
Hello, does anyone is having issues with device passthrough on oVirt 4.5?
I can passthrough the devices without issue to a given VM, but inside the VM it fails to recognize all the devices.
In my case I’ve added 4x GPUs to a VM, but only one show up, and there’s the following errors inside the VM:
[ 23.006655] nvidia 0000:0a:00.0: enabling device (0000 -> 0002)
[ 23.008026] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:
NVRM: BAR1 is 0M @ 0x0 (PCI:0000:0a:00.0)
[ 23.008035] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:
NVRM: BAR2 is 0M @ 0x0 (PCI:0000:0a:00.0)
[ 23.008040] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:
NVRM: BAR3 is 0M @ 0x0 (PCI:0000:0a:00.0)
[ 23.008045] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:
NVRM: BAR4 is 0M @ 0x0 (PCI:0000:0a:00.0)
[ 23.008049] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:
NVRM: BAR5 is 0M @ 0x0 (PCI:0000:0a:00.0)
[ 23.012339] NVRM: The NVIDIA GPU 0000:0a:00.0 (PCI ID: 10de:1db1)
NVRM: installed in this system is not supported by the
NVRM: NVIDIA 535.54.03 driver release.
NVRM: Please see 'Appendix A - Supported NVIDIA GPU Products'
NVRM: in this release's README, available on the operating system
NVRM: specific graphics driver download page at www.nvidia.com.
[ 23.016175] nvidia: probe of 0000:0a:00.0 failed with error -1
[ 23.016838] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:
NVRM: BAR0 is 0M @ 0x0 (PCI:0000:0b:00.0)
[ 23.016842] nvidia: probe of 0000:0b:00.0 failed with error -1
[ 23.017211] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:
NVRM: BAR0 is 0M @ 0x0 (PCI:0000:0c:00.0)
[ 23.017215] nvidia: probe of 0000:0c:00.0 failed with error -1
[ 23.017248] NVRM: The NVIDIA probe routine failed for 3 device(s).
[ 23.214409] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 535.54.03 Tue Jun 6 22:20:39 UTC 2023
[ 23.485704] [drm] [nvidia-drm] [GPU ID 0x00000900] Loading driver
[ 23.485708] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:09:00.0 on minor 1
On the host this shows up on dmesg, but seems right:
[ 709.572845] vfio-pci 0000:1a:00.0: vfio_ecap_init: hiding ecap 0x1e@0x258
[ 709.572877] vfio-pci 0000:1a:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
[ 709.572883] vfio-pci 0000:1a:00.0: vfio_ecap_init: hiding ecap 0x23@0xac0
[ 710.660813] vfio-pci 0000:1d:00.0: vfio_ecap_init: hiding ecap 0x1e@0x258
[ 710.660845] vfio-pci 0000:1d:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
[ 710.660851] vfio-pci 0000:1d:00.0: vfio_ecap_init: hiding ecap 0x23@0xac0
[ 711.748760] vfio-pci 0000:1e:00.0: vfio_ecap_init: hiding ecap 0x1e@0x258
[ 711.748791] vfio-pci 0000:1e:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
[ 711.748797] vfio-pci 0000:1e:00.0: vfio_ecap_init: hiding ecap 0x23@0xac0
[ 712.836687] vfio-pci 0000:1c:00.0: vfio_ecap_init: hiding ecap 0x1e@0x258
[ 712.836718] vfio-pci 0000:1c:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
[ 712.836725] vfio-pci 0000:1c:00.0: vfio_ecap_init: hiding ecap 0x23@0xac0
Thanks.
2 months, 2 weeks
No bootable disk OVA
by cello86@gmail.com
Hi all,
we imported a rhel 9.2 image from an OVA generated on vmware and we tried to create a new VM but we had a no bootable disk error. The OVA has been imported with virt-2-v library and if we create a new VM we noticed that the disk is 2 GB size but we resized the disk to 50 GB.
The VM has been started with Q35 Chipset with UEFI options and the disk has the flag bootable activated.
We're using ovirt 4.5.4-1
Could you help us to sort this issue?
Thanks,
Marcello
2 months, 2 weeks
ovirt template import using ansible
by destfinal@googlemail.com
Hi,
I use a set of templates, generated in one cluster and re-used in multiple clusters. The clusters do not have direct connections between each other. My dev environment can talk to all the clusters. Currently,
1. I export the templates (as OVAs) to one of the nodes (example: node1.source.cluster), from the ovirt console (https://management.source.cluster)
2. scp the templates to my dev machine (example: scp -r node1.source.cluster:/tmp/ovirt_templates /tmp/ovirt_templates)
3. scp the templates from my dev environment to the target cluster (example: scp /tmp/ovirt_templates node1.target.cluster:/tmp)
4. Import the templates using the ovirt console of the target cluster (https://management.target.cluster)
This is highly a manual job and I am trying to automate the process using ansible. I am unable to work it out using the ovit_template module documentation (https://docs.ansible.com/ansible/latest/collections/ovirt/ovirt/ovirt_tem...) and could not able to see any other module in this relation.
Has anybody done this before and point me to the right direction? Or if there is a better process than what I follow above, please suggest me one.
Please let me know if you need more information in this regard.
Thanks
2 months, 2 weeks