5 a.m.
Hello Michal and everybody,
I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but
the driver usbredir is not there. Is it normal or maybe it is in another
resource?
As the oVirt documentation says, when this driver is installed a new USB
windows service will be started in the client, but after execute the
ovirt-guest-tool setup and finish the installation there is not any USB new
service in my Windows client.
Is it possible that this usbredir driver is not in this ISO?
Many thanks in advanced,
Juanjo.
On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <jj197005(a)gmail.com> wrote:
Many thanks Michal,
I will try it and I will try to upgrade my oVirt 3.4.
Thanks again and best regards,
Juanjo.
On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <
michal.skrivanek(a)redhat.com> wrote:
>
> On Nov 12, 2014, at 16:39 , Juan Jose <jj197005(a)gmail.com> wrote:
>
> > Hello Michal or everybody,
> >
> > Could you tell me where can I get or download ovirt-guest-tool.iso?
>
> Hi,
> it's a regular part of the 3.5 release...
> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
> enjoy!:)
>
> Thanks,
> michal
>
> >
> > Many thanks in advanced,
> >
> > Juanjo.
> >
> >
> > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek <
> michal.skrivanek(a)redhat.com> wrote:
> >
> > On Nov 11, 2014, at 11:08 , Juan Jose <jj197005(a)gmail.com> wrote:
> >
> > > Thank you very much Michal, If I have checked Device administrator in
> my Windows 7 VM and as you can see in the attached image, the USB device is
> correctly installed. But when I click "File" in remote-viewer "USB
device
> selection" appears in grey and I can't select any USB device.
> > >
> > > Is there any other requirement to be able redirect USB devices?, Is
> it necessary to install usbclerk in Windows clients to redirect USB to the
> Windows guest?
> >
> > usbredir drivers yes, you need them, they should be on the guest tools
> iso
> >
> > Thanks,
> > michal
> >
> > >
> > > Many thanks in advanced,
> > >
> > > Juanjo.
> > >
> > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek <
> michal.skrivanek(a)redhat.com> wrote:
> > >
> > > On Nov 10, 2014, at 17:54 , Juan Jose <jj197005(a)gmail.com> wrote:
> > >
> > > > Hello everybody,
> > > >
> > > > I have an oVirt 3.4 deployment and I have some Windows 7
> Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client.
> I'm using remote - viewer as console. Also I have observed something wrong
> in my administration portal. The oVirt documentation says that I have to
> select Native USB mode in console properties in VM configuration
> > >
> > > yes, that's the only supported way
> > > you should see the USB controller in devices
> > >
> > > > but after select this mode, it doesn't remain. If I check this
> value in console configuration again I can see disabled, native mode value
> have been changed.
> > >
> > > there used to be such issue in 3.4..it is fixed in 3.5 already.
> > > It should be a UI problem only…
> > >
> > > Thanks,
> > > michal
> > >
> > > >
> > > > Is there someone have had this problem?, and how I can solve it?,
> is it necessary to install in Windows clients us clerk software?
> > > >
> > > > Many thanks in advanced.
> > > >
> > > > Juanjo.
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> > >
> > > <DeviceAdministrator.png>
> >
> >
>
>
7:07 a.m.
New subject: USB redirect
On Nov 13, 2014, at 12:00 , Juan Jose <jj197005(a)gmail.com> wrote:
Hello Michal and everybody,
I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver
usbredir is not there. Is it normal or maybe it is in another resource?
As the oVirt documentation says, when this driver is installed a new USB windows service
will be started in the client, but after execute the ovirt-guest-tool setup and finish the
installation there is not any USB new service in my Windows client.
Is it possible that this usbredir driver is not in this ISO?
adding Lev who builds the ISO…can you please check?
Thanks,
michal
Many thanks in advanced,
Juanjo.
On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <jj197005(a)gmail.com> wrote:
Many thanks Michal,
I will try it and I will try to upgrade my oVirt 3.4.
Thanks again and best regards,
Juanjo.
On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <michal.skrivanek(a)redhat.com>
wrote:
On Nov 12, 2014, at 16:39 , Juan Jose <jj197005(a)gmail.com> wrote:
> Hello Michal or everybody,
>
> Could you tell me where can I get or download ovirt-guest-tool.iso?
Hi,
it's a regular part of the 3.5 release...
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
enjoy!:)
Thanks,
michal
>
> Many thanks in advanced,
>
> Juanjo.
>
>
> On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
>
> On Nov 11, 2014, at 11:08 , Juan Jose <jj197005(a)gmail.com> wrote:
>
> > Thank you very much Michal, If I have checked Device administrator in my
Windows 7 VM and as you can see in the attached image, the USB device is correctly
installed. But when I click "File" in remote-viewer "USB device
selection" appears in grey and I can't select any USB device.
> >
> > Is there any other requirement to be able redirect USB devices?, Is it
necessary to install usbclerk in Windows clients to redirect USB to the Windows guest?
>
> usbredir drivers yes, you need them, they should be on the guest tools iso
>
> Thanks,
> michal
>
> >
> > Many thanks in advanced,
> >
> > Juanjo.
> >
> > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
> >
> > On Nov 10, 2014, at 17:54 , Juan Jose <jj197005(a)gmail.com> wrote:
> >
> > > Hello everybody,
> > >
> > > I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32
bits guests. I can't redirect USB from a Windows 7 client. I'm using remote -
viewer as console. Also I have observed something wrong in my administration portal. The
oVirt documentation says that I have to select Native USB mode in console properties in VM
configuration
> >
> > yes, that's the only supported way
> > you should see the USB controller in devices
> >
> > > but after select this mode, it doesn't remain. If I check this value
in console configuration again I can see disabled, native mode value have been changed.
> >
> > there used to be such issue in 3.4..it is fixed in 3.5 already.
> > It should be a UI problem only…
> >
> > Thanks,
> > michal
> >
> > >
> > > Is there someone have had this problem?, and how I can solve it?, is it
necessary to install in Windows clients us clerk software?
> > >
> > > Many thanks in advanced.
> > >
> > > Juanjo.
> > > _______________________________________________
> > > Users mailing list
> > > Users(a)ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> > <DeviceAdministrator.png>
>
>
2:42 a.m.
New subject: USB redirect
Hi Michal,
As far as I know there is no need to install something inside VM for the Native USB
redirection to function properly, thus nothing related is included on the oVirt WGT ISO.
The user/admin only needs to properly configure the VM for Native USB redirection and
install the Spice client.
I forwarded the issue to the Spice team, they could properly point to the issue.
Thanks in advance,
Lev Veyde.
----- Original Message -----
From: "Michal Skrivanek" <michal.skrivanek(a)redhat.com>
To: "Juan Jose" <jj197005(a)gmail.com>, "Lev Veyde"
<lveyde(a)redhat.com>
Cc: "users(a)ovirt.org List" <users(a)ovirt.org>
Sent: Friday, November 21, 2014 3:07:09 PM
Subject: Re: [ovirt-users] USB redirect
On Nov 13, 2014, at 12:00 , Juan Jose <jj197005(a)gmail.com> wrote:
Hello Michal and everybody,
I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver
usbredir is not there. Is it normal or maybe it is in another resource?
As the oVirt documentation says, when this driver is installed a new USB windows service
will be started in the client, but after execute the ovirt-guest-tool setup and finish the
installation there is not any USB new service in my Windows client.
Is it possible that this usbredir driver is not in this ISO?
adding Lev who builds the ISO…can you please check?
Thanks,
michal
Many thanks in advanced,
Juanjo.
On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <jj197005(a)gmail.com> wrote:
Many thanks Michal,
I will try it and I will try to upgrade my oVirt 3.4.
Thanks again and best regards,
Juanjo.
On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <michal.skrivanek(a)redhat.com>
wrote:
On Nov 12, 2014, at 16:39 , Juan Jose <jj197005(a)gmail.com> wrote:
> Hello Michal or everybody,
>
> Could you tell me where can I get or download ovirt-guest-tool.iso?
Hi,
it's a regular part of the 3.5 release...
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
enjoy!:)
Thanks,
michal
>
> Many thanks in advanced,
>
> Juanjo.
>
>
> On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
>
> On Nov 11, 2014, at 11:08 , Juan Jose <jj197005(a)gmail.com> wrote:
>
> > Thank you very much Michal, If I have checked Device administrator in my
Windows 7 VM and as you can see in the attached image, the USB device is correctly
installed. But when I click "File" in remote-viewer "USB device
selection" appears in grey and I can't select any USB device.
> >
> > Is there any other requirement to be able redirect USB devices?, Is it
necessary to install usbclerk in Windows clients to redirect USB to the Windows guest?
>
> usbredir drivers yes, you need them, they should be on the guest tools iso
>
> Thanks,
> michal
>
> >
> > Many thanks in advanced,
> >
> > Juanjo.
> >
> > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
> >
> > On Nov 10, 2014, at 17:54 , Juan Jose <jj197005(a)gmail.com> wrote:
> >
> > > Hello everybody,
> > >
> > > I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32
bits guests. I can't redirect USB from a Windows 7 client. I'm using remote -
viewer as console. Also I have observed something wrong in my administration portal. The
oVirt documentation says that I have to select Native USB mode in console properties in VM
configuration
> >
> > yes, that's the only supported way
> > you should see the USB controller in devices
> >
> > > but after select this mode, it doesn't remain. If I check this value
in console configuration again I can see disabled, native mode value have been changed.
> >
> > there used to be such issue in 3.4..it is fixed in 3.5 already.
> > It should be a UI problem only…
> >
> > Thanks,
> > michal
> >
> > >
> > > Is there someone have had this problem?, and how I can solve it?, is it
necessary to install in Windows clients us clerk software?
> > >
> > > Many thanks in advanced.
> > >
> > > Juanjo.
> > > _______________________________________________
> > > Users mailing list
> > > Users(a)ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> > <DeviceAdministrator.png>
>
>
4:48 a.m.
New subject: USB redirect
Hello Lev and Michal and everybody,
My main question is:
Is it necessary to install in Windows 7 client, no in the guest, the
usbclerk to be able to get USB pen drive into the VM from the Windows 7
client?, in afirmative case, where can I get usbclerk?
Many thanks in advanced,
Juanjo.
On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde <lveyde(a)redhat.com> wrote:
Hi Michal,
As far as I know there is no need to install something inside VM for the
Native USB redirection to function properly, thus nothing related is
included on the oVirt WGT ISO.
The user/admin only needs to properly configure the VM for Native USB
redirection and install the Spice client.
I forwarded the issue to the Spice team, they could properly point to the
issue.
Thanks in advance,
Lev Veyde.
----- Original Message -----
From: "Michal Skrivanek" <michal.skrivanek(a)redhat.com>
To: "Juan Jose" <jj197005(a)gmail.com>, "Lev Veyde"
<lveyde(a)redhat.com>
Cc: "users(a)ovirt.org List" <users(a)ovirt.org>
Sent: Friday, November 21, 2014 3:07:09 PM
Subject: Re: [ovirt-users] USB redirect
On Nov 13, 2014, at 12:00 , Juan Jose <jj197005(a)gmail.com> wrote:
> Hello Michal and everybody,
>
> I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me
but the driver usbredir is not there. Is it normal or maybe it is in
another resource?
>
> As the oVirt documentation says, when this driver is installed a new USB
windows service will be started in the client, but after execute the
ovirt-guest-tool setup and finish the installation there is not any USB new
service in my Windows client.
>
> Is it possible that this usbredir driver is not in this ISO?
adding Lev who builds the ISO…can you please check?
Thanks,
michal
>
> Many thanks in advanced,
>
> Juanjo.
>
> On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <jj197005(a)gmail.com> wrote:
> Many thanks Michal,
>
> I will try it and I will try to upgrade my oVirt 3.4.
>
> Thanks again and best regards,
>
> Juanjo.
>
> On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <
michal.skrivanek(a)redhat.com> wrote:
>
> On Nov 12, 2014, at 16:39 , Juan Jose <jj197005(a)gmail.com> wrote:
>
> > Hello Michal or everybody,
> >
> > Could you tell me where can I get or download ovirt-guest-tool.iso?
>
> Hi,
> it's a regular part of the 3.5 release...
> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
> enjoy!:)
>
> Thanks,
> michal
>
> >
> > Many thanks in advanced,
> >
> > Juanjo.
> >
> >
> > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek <
michal.skrivanek(a)redhat.com> wrote:
> >
> > On Nov 11, 2014, at 11:08 , Juan Jose <jj197005(a)gmail.com> wrote:
> >
> > > Thank you very much Michal, If I have checked Device administrator
in my Windows 7 VM and as you can see in the attached image, the USB device
is correctly installed. But when I click "File" in remote-viewer "USB
device selection" appears in grey and I can't select any USB device.
> > >
> > > Is there any other requirement to be able redirect USB devices?, Is
it necessary to install usbclerk in Windows clients to redirect USB to the
Windows guest?
> >
> > usbredir drivers yes, you need them, they should be on the guest tools
iso
> >
> > Thanks,
> > michal
> >
> > >
> > > Many thanks in advanced,
> > >
> > > Juanjo.
> > >
> > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek <
michal.skrivanek(a)redhat.com> wrote:
> > >
> > > On Nov 10, 2014, at 17:54 , Juan Jose <jj197005(a)gmail.com> wrote:
> > >
> > > > Hello everybody,
> > > >
> > > > I have an oVirt 3.4 deployment and I have some Windows 7
Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client.
I'm using remote - viewer as console. Also I have observed something wrong
in my administration portal. The oVirt documentation says that I have to
select Native USB mode in console properties in VM configuration
> > >
> > > yes, that's the only supported way
> > > you should see the USB controller in devices
> > >
> > > > but after select this mode, it doesn't remain. If I check this
value in console configuration again I can see disabled, native mode value
have been changed.
> > >
> > > there used to be such issue in 3.4..it is fixed in 3.5 already.
> > > It should be a UI problem only…
> > >
> > > Thanks,
> > > michal
> > >
> > > >
> > > > Is there someone have had this problem?, and how I can solve it?,
is it necessary to install in Windows clients us clerk software?
> > > >
> > > > Many thanks in advanced.
> > > >
> > > > Juanjo.
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> > >
> > > <DeviceAdministrator.png>
> >
> >
>
>
>
5:19 a.m.
New subject: USB redirect
Hi Juan,
Refer to this post, the state of affairs didn't chagne since then:
http://lists.ovirt.org/pipermail/users/2013-May/014429.html
David
On Po, 2014-11-24 at 11:48 +0100, Juan Jose wrote:
Hello Lev and Michal and everybody,
My main question is:
Is it necessary to install in Windows 7 client, no in the guest, the
usbclerk to be able to get USB pen drive into the VM from the Windows
7 client?, in afirmative case, where can I get usbclerk?
Many thanks in advanced,
Juanjo.
On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde <lveyde(a)redhat.com> wrote:
Hi Michal,
As far as I know there is no need to install something inside
VM for the Native USB redirection to function properly, thus
nothing related is included on the oVirt WGT ISO.
The user/admin only needs to properly configure the VM for
Native USB redirection and install the Spice client.
I forwarded the issue to the Spice team, they could properly
point to the issue.
Thanks in advance,
Lev Veyde.
----- Original Message -----
From: "Michal Skrivanek" <michal.skrivanek(a)redhat.com>
To: "Juan Jose" <jj197005(a)gmail.com>, "Lev Veyde"
<lveyde(a)redhat.com>
Cc: "users(a)ovirt.org List" <users(a)ovirt.org>
Sent: Friday, November 21, 2014 3:07:09 PM
Subject: Re: [ovirt-users] USB redirect
On Nov 13, 2014, at 12:00 , Juan Jose <jj197005(a)gmail.com>
wrote:
> Hello Michal and everybody,
>
> I'm sorry but I have downloaded ovirt-guest-tools from URL
you gave me but the driver usbredir is not there. Is it normal
or maybe it is in another resource?
>
> As the oVirt documentation says, when this driver is
installed a new USB windows service will be started in the
client, but after execute the ovirt-guest-tool setup and
finish the installation there is not any USB new service in my
Windows client.
>
> Is it possible that this usbredir driver is not in this ISO?
adding Lev who builds the ISO…can you please check?
Thanks,
michal
>
> Many thanks in advanced,
>
> Juanjo.
>
> On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose
<jj197005(a)gmail.com> wrote:
> Many thanks Michal,
>
> I will try it and I will try to upgrade my oVirt 3.4.
>
> Thanks again and best regards,
>
> Juanjo.
>
> On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
>
> On Nov 12, 2014, at 16:39 , Juan Jose <jj197005(a)gmail.com>
wrote:
>
> > Hello Michal or everybody,
> >
> > Could you tell me where can I get or download
ovirt-guest-tool.iso?
>
> Hi,
> it's a regular part of the 3.5 release...
>
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
> enjoy!:)
>
> Thanks,
> michal
>
> >
> > Many thanks in advanced,
> >
> > Juanjo.
> >
> >
> > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
> >
> > On Nov 11, 2014, at 11:08 , Juan Jose <jj197005(a)gmail.com>
wrote:
> >
> > > Thank you very much Michal, If I have checked Device
administrator in my Windows 7 VM and as you can see in the
attached image, the USB device is correctly installed. But
when I click "File" in remote-viewer "USB device selection"
appears in grey and I can't select any USB device.
> > >
> > > Is there any other requirement to be able redirect USB
devices?, Is it necessary to install usbclerk in Windows
clients to redirect USB to the Windows guest?
> >
> > usbredir drivers yes, you need them, they should be on the
guest tools iso
> >
> > Thanks,
> > michal
> >
> > >
> > > Many thanks in advanced,
> > >
> > > Juanjo.
> > >
> > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
> > >
> > > On Nov 10, 2014, at 17:54 , Juan Jose
<jj197005(a)gmail.com> wrote:
> > >
> > > > Hello everybody,
> > > >
> > > > I have an oVirt 3.4 deployment and I have some
Windows 7 Enterprise 32 bits guests. I can't redirect USB from
a Windows 7 client. I'm using remote - viewer as console. Also
I have observed something wrong in my administration portal.
The oVirt documentation says that I have to select Native USB
mode in console properties in VM configuration
> > >
> > > yes, that's the only supported way
> > > you should see the USB controller in devices
> > >
> > > > but after select this mode, it doesn't remain. If I
check this value in console configuration again I can see
disabled, native mode value have been changed.
> > >
> > > there used to be such issue in 3.4..it is fixed in 3.5
already.
> > > It should be a UI problem only…
> > >
> > > Thanks,
> > > michal
> > >
> > > >
> > > > Is there someone have had this problem?, and how I can
solve it?, is it necessary to install in Windows clients us
clerk software?
> > > >
> > > > Many thanks in advanced.
> > > >
> > > > Juanjo.
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> > >
> > > <DeviceAdministrator.png>
> >
> >
>
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:04 a.m.
New subject: USB redirect
Thank you very much David,
Now I have clear the issue.
Juanjo.
On Mon, Nov 24, 2014 at 12:19 PM, David Jaša <djasa(a)redhat.com> wrote:
Hi Juan,
Refer to this post, the state of affairs didn't chagne since then:
http://lists.ovirt.org/pipermail/users/2013-May/014429.html
David
On Po, 2014-11-24 at 11:48 +0100, Juan Jose wrote:
> Hello Lev and Michal and everybody,
>
>
> My main question is:
>
> Is it necessary to install in Windows 7 client, no in the guest, the
> usbclerk to be able to get USB pen drive into the VM from the Windows
> 7 client?, in afirmative case, where can I get usbclerk?
>
>
> Many thanks in advanced,
>
>
> Juanjo.
>
>
> On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde <lveyde(a)redhat.com> wrote:
> Hi Michal,
>
> As far as I know there is no need to install something inside
> VM for the Native USB redirection to function properly, thus
> nothing related is included on the oVirt WGT ISO.
>
> The user/admin only needs to properly configure the VM for
> Native USB redirection and install the Spice client.
>
> I forwarded the issue to the Spice team, they could properly
> point to the issue.
>
> Thanks in advance,
> Lev Veyde.
>
> ----- Original Message -----
> From: "Michal Skrivanek" <michal.skrivanek(a)redhat.com>
> To: "Juan Jose" <jj197005(a)gmail.com>, "Lev Veyde"
> <lveyde(a)redhat.com>
> Cc: "users(a)ovirt.org List" <users(a)ovirt.org>
> Sent: Friday, November 21, 2014 3:07:09 PM
> Subject: Re: [ovirt-users] USB redirect
>
>
> On Nov 13, 2014, at 12:00 , Juan Jose <jj197005(a)gmail.com>
> wrote:
>
> > Hello Michal and everybody,
> >
> > I'm sorry but I have downloaded ovirt-guest-tools from URL
> you gave me but the driver usbredir is not there. Is it normal
> or maybe it is in another resource?
> >
> > As the oVirt documentation says, when this driver is
> installed a new USB windows service will be started in the
> client, but after execute the ovirt-guest-tool setup and
> finish the installation there is not any USB new service in my
> Windows client.
> >
> > Is it possible that this usbredir driver is not in this ISO?
>
> adding Lev who builds the ISO…can you please check?
>
> Thanks,
> michal
>
> >
> > Many thanks in advanced,
> >
> > Juanjo.
> >
> > On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose
> <jj197005(a)gmail.com> wrote:
> > Many thanks Michal,
> >
> > I will try it and I will try to upgrade my oVirt 3.4.
> >
> > Thanks again and best regards,
> >
> > Juanjo.
> >
> > On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek
> <michal.skrivanek(a)redhat.com> wrote:
> >
> > On Nov 12, 2014, at 16:39 , Juan Jose <jj197005(a)gmail.com>
> wrote:
> >
> > > Hello Michal or everybody,
> > >
> > > Could you tell me where can I get or download
> ovirt-guest-tool.iso?
> >
> > Hi,
> > it's a regular part of the 3.5 release...
> >
> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
> > enjoy!:)
> >
> > Thanks,
> > michal
> >
> > >
> > > Many thanks in advanced,
> > >
> > > Juanjo.
> > >
> > >
> > > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
> <michal.skrivanek(a)redhat.com> wrote:
> > >
> > > On Nov 11, 2014, at 11:08 , Juan Jose <jj197005(a)gmail.com>
> wrote:
> > >
> > > > Thank you very much Michal, If I have checked Device
> administrator in my Windows 7 VM and as you can see in the
> attached image, the USB device is correctly installed. But
> when I click "File" in remote-viewer "USB device
selection"
> appears in grey and I can't select any USB device.
> > > >
> > > > Is there any other requirement to be able redirect USB
> devices?, Is it necessary to install usbclerk in Windows
> clients to redirect USB to the Windows guest?
> > >
> > > usbredir drivers yes, you need them, they should be on the
> guest tools iso
> > >
> > > Thanks,
> > > michal
> > >
> > > >
> > > > Many thanks in advanced,
> > > >
> > > > Juanjo.
> > > >
> > > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
> <michal.skrivanek(a)redhat.com> wrote:
> > > >
> > > > On Nov 10, 2014, at 17:54 , Juan Jose
> <jj197005(a)gmail.com> wrote:
> > > >
> > > > > Hello everybody,
> > > > >
> > > > > I have an oVirt 3.4 deployment and I have some
> Windows 7 Enterprise 32 bits guests. I can't redirect USB from
> a Windows 7 client. I'm using remote - viewer as console. Also
> I have observed something wrong in my administration portal.
> The oVirt documentation says that I have to select Native USB
> mode in console properties in VM configuration
> > > >
> > > > yes, that's the only supported way
> > > > you should see the USB controller in devices
> > > >
> > > > > but after select this mode, it doesn't remain. If I
> check this value in console configuration again I can see
> disabled, native mode value have been changed.
> > > >
> > > > there used to be such issue in 3.4..it is fixed in 3.5
> already.
> > > > It should be a UI problem only…
> > > >
> > > > Thanks,
> > > > michal
> > > >
> > > > >
> > > > > Is there someone have had this problem?, and how I can
> solve it?, is it necessary to install in Windows clients us
> clerk software?
> > > > >
> > > > > Many thanks in advanced.
> > > > >
> > > > > Juanjo.
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users(a)ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > > >
> > > > <DeviceAdministrator.png>
> > >
> > >
> >
> >
> >
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
6:01 a.m.
New subject: USB redirect
On 11/23/2014 10:42 AM, Lev Veyde wrote:
Hi Michal,
As far as I know there is no need to install something inside VM for the Native USB
redirection to function properly, thus nothing related is included on the oVirt WGT ISO.
Hi,
Lev, you are correct; there is nothing to install on the guest for Spice
Native USB.
On the client side there is a need for remote-viewer to be configured
with USB redir enabled,
and having access to the device (via libusb).
On a Windows client currently we use WinUSB driver to enable access to
the USB device.
The driver can be installed using the usbclerk service or manually (e.g.
with Zadig).
It must be installed for each device to be redirected.
On Ovirt, as mentioned, Native Spice USB option has to be enabled.
(This would also add the virtual usb devices needed on the
qemu-kvm/spice-server side).
Hope that helps,
Uri.
The user/admin only needs to properly configure the VM for Native USB redirection and
install the Spice client.
I forwarded the issue to the Spice team, they could properly point to the issue.
Thanks in advance,
Lev Veyde.
----- Original Message -----
From: "Michal Skrivanek" <michal.skrivanek(a)redhat.com>
To: "Juan Jose" <jj197005(a)gmail.com>, "Lev Veyde"
<lveyde(a)redhat.com>
Cc: "users(a)ovirt.org List" <users(a)ovirt.org>
Sent: Friday, November 21, 2014 3:07:09 PM
Subject: Re: [ovirt-users] USB redirect
On Nov 13, 2014, at 12:00 , Juan Jose <jj197005(a)gmail.com> wrote:
> Hello Michal and everybody,
>
> I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the
driver usbredir is not there. Is it normal or maybe it is in another resource?
>
> As the oVirt documentation says, when this driver is installed a new USB windows
service will be started in the client, but after execute the ovirt-guest-tool setup and
finish the installation there is not any USB new service in my Windows client.
>
> Is it possible that this usbredir driver is not in this ISO?
adding Lev who builds the ISO…can you please check?
Thanks,
michal
> Many thanks in advanced,
>
> Juanjo.
>
> On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <jj197005(a)gmail.com> wrote:
> Many thanks Michal,
>
> I will try it and I will try to upgrade my oVirt 3.4.
>
> Thanks again and best regards,
>
> Juanjo.
>
> On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <michal.skrivanek(a)redhat.com>
wrote:
>
> On Nov 12, 2014, at 16:39 , Juan Jose <jj197005(a)gmail.com> wrote:
>
>> Hello Michal or everybody,
>>
>> Could you tell me where can I get or download ovirt-guest-tool.iso?
> Hi,
> it's a regular part of the 3.5 release...
> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
> enjoy!:)
>
> Thanks,
> michal
>
>> Many thanks in advanced,
>>
>> Juanjo.
>>
>>
>> On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
>>
>> On Nov 11, 2014, at 11:08 , Juan Jose <jj197005(a)gmail.com> wrote:
>>
>>> Thank you very much Michal, If I have checked Device administrator in my
Windows 7 VM and as you can see in the attached image, the USB device is correctly
installed. But when I click "File" in remote-viewer "USB device
selection" appears in grey and I can't select any USB device.
>>>
>>> Is there any other requirement to be able redirect USB devices?, Is it
necessary to install usbclerk in Windows clients to redirect USB to the Windows guest?
>> usbredir drivers yes, you need them, they should be on the guest tools iso
>>
>> Thanks,
>> michal
>>
>>> Many thanks in advanced,
>>>
>>> Juanjo.
>>>
>>> On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
<michal.skrivanek(a)redhat.com> wrote:
>>>
>>> On Nov 10, 2014, at 17:54 , Juan Jose <jj197005(a)gmail.com> wrote:
>>>
>>>> Hello everybody,
>>>>
>>>> I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32
bits guests. I can't redirect USB from a Windows 7 client. I'm using remote -
viewer as console. Also I have observed something wrong in my administration portal. The
oVirt documentation says that I have to select Native USB mode in console properties in VM
configuration
>>> yes, that's the only supported way
>>> you should see the USB controller in devices
>>>
>>>> but after select this mode, it doesn't remain. If I check this value
in console configuration again I can see disabled, native mode value have been changed.
>>> there used to be such issue in 3.4..it is fixed in 3.5 already.
>>> It should be a UI problem only…
>>>
>>> Thanks,
>>> michal
>>>
>>>> Is there someone have had this problem?, and how I can solve it?, is it
necessary to install in Windows clients us clerk software?
>>>>
>>>> Many thanks in advanced.
>>>>
>>>> Juanjo.
>>>>
6:46 a.m.
New subject: USB redirect
Thank you very much Uri and everybody,
Best regards,
Juanjo.
On Wed, Nov 26, 2014 at 1:01 PM, Uri Lublin <uril(a)redhat.com> wrote:
On 11/23/2014 10:42 AM, Lev Veyde wrote:
> Hi Michal,
>
> As far as I know there is no need to install something inside VM for the
> Native USB redirection to function properly, thus nothing related is
> included on the oVirt WGT ISO.
>
Hi,
Lev, you are correct; there is nothing to install on the guest for Spice
Native USB.
On the client side there is a need for remote-viewer to be configured with
USB redir enabled,
and having access to the device (via libusb).
On a Windows client currently we use WinUSB driver to enable access to the
USB device.
The driver can be installed using the usbclerk service or manually (e.g.
with Zadig).
It must be installed for each device to be redirected.
On Ovirt, as mentioned, Native Spice USB option has to be enabled.
(This would also add the virtual usb devices needed on the
qemu-kvm/spice-server side).
Hope that helps,
Uri.
> The user/admin only needs to properly configure the VM for Native USB
> redirection and install the Spice client.
>
> I forwarded the issue to the Spice team, they could properly point to the
> issue.
>
> Thanks in advance,
> Lev Veyde.
>
> ----- Original Message -----
> From: "Michal Skrivanek" <michal.skrivanek(a)redhat.com>
> To: "Juan Jose" <jj197005(a)gmail.com>, "Lev Veyde"
<lveyde(a)redhat.com>
> Cc: "users(a)ovirt.org List" <users(a)ovirt.org>
> Sent: Friday, November 21, 2014 3:07:09 PM
> Subject: Re: [ovirt-users] USB redirect
>
>
> On Nov 13, 2014, at 12:00 , Juan Jose <jj197005(a)gmail.com> wrote:
>
> Hello Michal and everybody,
>>
>> I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me
>> but the driver usbredir is not there. Is it normal or maybe it is in
>> another resource?
>>
>> As the oVirt documentation says, when this driver is installed a new USB
>> windows service will be started in the client, but after execute the
>> ovirt-guest-tool setup and finish the installation there is not any USB new
>> service in my Windows client.
>>
>> Is it possible that this usbredir driver is not in this ISO?
>>
> adding Lev who builds the ISO…can you please check?
>
> Thanks,
> michal
>
> Many thanks in advanced,
>>
>> Juanjo.
>>
>> On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <jj197005(a)gmail.com> wrote:
>> Many thanks Michal,
>>
>> I will try it and I will try to upgrade my oVirt 3.4.
>>
>> Thanks again and best regards,
>>
>> Juanjo.
>>
>> On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <
>> michal.skrivanek(a)redhat.com> wrote:
>>
>> On Nov 12, 2014, at 16:39 , Juan Jose <jj197005(a)gmail.com> wrote:
>>
>> Hello Michal or everybody,
>>>
>>> Could you tell me where can I get or download ovirt-guest-tool.iso?
>>>
>> Hi,
>> it's a regular part of the 3.5 release...
>> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
>> enjoy!:)
>>
>> Thanks,
>> michal
>>
>> Many thanks in advanced,
>>>
>>> Juanjo.
>>>
>>>
>>> On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek <
>>> michal.skrivanek(a)redhat.com> wrote:
>>>
>>> On Nov 11, 2014, at 11:08 , Juan Jose <jj197005(a)gmail.com> wrote:
>>>
>>> Thank you very much Michal, If I have checked Device administrator in
>>>> my Windows 7 VM and as you can see in the attached image, the USB device
is
>>>> correctly installed. But when I click "File" in remote-viewer
"USB device
>>>> selection" appears in grey and I can't select any USB device.
>>>>
>>>> Is there any other requirement to be able redirect USB devices?, Is it
>>>> necessary to install usbclerk in Windows clients to redirect USB to the
>>>> Windows guest?
>>>>
>>> usbredir drivers yes, you need them, they should be on the guest tools
>>> iso
>>>
>>> Thanks,
>>> michal
>>>
>>> Many thanks in advanced,
>>>>
>>>> Juanjo.
>>>>
>>>> On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek <
>>>> michal.skrivanek(a)redhat.com> wrote:
>>>>
>>>> On Nov 10, 2014, at 17:54 , Juan Jose <jj197005(a)gmail.com> wrote:
>>>>
>>>> Hello everybody,
>>>>>
>>>>> I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise
>>>>> 32 bits guests. I can't redirect USB from a Windows 7 client.
I'm using
>>>>> remote - viewer as console. Also I have observed something wrong in
my
>>>>> administration portal. The oVirt documentation says that I have to
select
>>>>> Native USB mode in console properties in VM configuration
>>>>>
>>>> yes, that's the only supported way
>>>> you should see the USB controller in devices
>>>>
>>>> but after select this mode, it doesn't remain. If I check this
value
>>>>> in console configuration again I can see disabled, native mode value
have
>>>>> been changed.
>>>>>
>>>> there used to be such issue in 3.4..it is fixed in 3.5 already.
>>>> It should be a UI problem only…
>>>>
>>>> Thanks,
>>>> michal
>>>>
>>>> Is there someone have had this problem?, and how I can solve it?, is
>>>>> it necessary to install in Windows clients us clerk software?
>>>>>
>>>>> Many thanks in advanced.
>>>>>
>>>>> Juanjo.
>>>>>
>>>>>
2:26 a.m.
New subject: USB redirect
------=_Part_19165193_377790850.1417076803762
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Maybe this should be added to the oVirt wiki?=20
Yaniv=20
----- Original Message -----
From: "Juan Jose" <jj197005(a)gmail.com>
To: uril(a)redhat.com
Cc: "users(a)ovirt.org List" <users(a)ovirt.org>, "Lev Veyde"
<lveyde(a)redhat.=
com>
Sent: Wednesday, November 26, 2014 2:46:40 PM
Subject: Re: [ovirt-users] USB redirect
Thank you very much Uri and everybody,
Best regards,
Juanjo.
On Wed, Nov 26, 2014 at 1:01 PM, Uri Lublin < uril(a)redhat.com >
wrote:
> On 11/23/2014 10:42 AM, Lev Veyde wrote:
=20
> > Hi Michal,
>=20
=20
> > As far as I know there is no need to install something
inside VM for =
the
> > Native USB redirection to function properly, thus nothing
related is
> > included on the oVirt WGT ISO.
>=20
=20
> Hi,
=20
> Lev, you are correct; there is nothing to install on the guest
for Spic=
e
> Native USB.
=20
> On the client side there is a need for remote-viewer to be
configured w=
ith
> USB redir enabled,
=20
> and having access to the device (via libusb).
=20
> On a Windows client currently we use WinUSB driver to enable access to =
the
> USB device.
=20
> The driver can be installed using the usbclerk service or manually (e.g=
.
> with
> Zadig).
=20
> It must be installed for each device to be redirected.
=20
> On Ovirt, as mentioned, Native Spice USB option has to be
enabled.
=20
> (This would also add the virtual usb devices needed on the
> qemu-kvm/spice-server side).
=20
> Hope that helps,
=20
> Uri.
=20
> > The user/admin only needs to properly configure the VM for
Native USB
> > redirection and install the Spice client.
>=20
=20
> > I forwarded the issue to the Spice team, they could
properly point to=
the
> > issue.
>=20
=20
> > Thanks in advance,
>=20
=20
> > Lev Veyde.
>=20
=20
> > ----- Original Message -----
>=20
=20
> > From: "Michal Skrivanek" < michal.skrivanek(a)redhat.com >
>=20
=20
> > To: "Juan Jose" < jj197005(a)gmail.com >, "Lev Veyde"
< lveyde(a)redhat.c=
om >
>=20
=20
> > Cc: " users(a)ovirt.org List" < users(a)ovirt.org >
>=20
=20
> > Sent: Friday, November 21, 2014 3:07:09 PM
>=20
=20
> > Subject: Re: [ovirt-users] USB redirect
>=20
=20
> > On Nov 13, 2014, at 12:00 , Juan Jose <
jj197005(a)gmail.com > wrote:
>=20
=20
> > > Hello Michal and everybody,
> >=20
>=20
=20
> > > I'm sorry but I have downloaded ovirt-guest-tools
from URL you gave=
me
> > > but
> > > the driver usbredir is not there. Is it normal or maybe it is in
> > > another
> > > resource?
> >=20
>=20
=20
> > > As the oVirt documentation says, when this driver is
installed a ne=
w
> > > USB
> > > windows service will be started in the client, but after execute th=
e
> > > ovirt-guest-tool setup and finish the installation
there is not any=
USB
> > > new
> > > service in my Windows client.
> >=20
>=20
=20
> > > Is it possible that this usbredir driver is not in
this ISO?
> >=20
>=20
=20
> > adding Lev who builds the ISO=E2=80=A6can you please
check?
>=20
=20
> > Thanks,
>=20
=20
> > michal
>=20
=20
> > > Many thanks in advanced,
> >=20
>=20
=20
> > > Juanjo.
> > >=20
> >=20
>=20
> > > On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <
jj197005(a)gmail.com >
> > > wrote:
> >=20
>=20
=20
> > > Many thanks Michal,
> >=20
>=20
=20
> > > I will try it and I will try to upgrade my oVirt 3.4.
> >=20
>=20
=20
> > > Thanks again and best regards,
> >=20
>=20
=20
> > > Juanjo.
> > >=20
> >=20
>=20
> > > On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek
<
> > > michal.skrivanek(a)redhat.com > wrote:
> >=20
>=20
=20
> > > On Nov 12, 2014, at 16:39 , Juan Jose <
jj197005(a)gmail.com > wrote:
> >=20
>=20
=20
> > > > Hello Michal or everybody,
> > >=20
> >=20
>=20
=20
> > > > Could you tell me where can I get or download
ovirt-guest-tool.is=
o?
> > >=20
> >=20
>=20
=20
> > > Hi,
> >=20
>=20
=20
> > > it's a regular part of the 3.5 release...
> >=20
>=20
=20
> > > http://resources.ovirt.org/ pub/ovirt-3.5/iso/ovirt-guest- tools/
> >=20
>=20
=20
> > > enjoy!:)
> >=20
>=20
=20
> > > Thanks,
> >=20
>=20
=20
> > > michal
> >=20
>=20
=20
> > > > > Many thanks in advanced,
> > >=20
> >=20
>=20
=20
> > > > Juanjo.
> > >=20
> >=20
>=20
=20
> > > > > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek <
> > > > > michal.skrivanek(a)redhat.com > wrote:
> > >=20
> >=20
>=20
=20
> > > > On Nov 11, 2014, at 11:08 , Juan Jose <
jj197005(a)gmail.com > wrot=
e:
> > >=20
> >=20
>=20
=20
> > > > > Thank you very much Michal, If I have
checked Device administra=
tor
> > > > > in
> > > > > my
> > > > > Windows 7 VM and as you can see in the attached image, the USB
> > > > > device
> > > > > is
> > > > > correctly installed. But when I click "File" in
remote-viewer "=
USB
> > > > > > device
> > > > > > selection" appears in grey and I can't select any
USB device.
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > Is there any other requirement to be able
redirect USB devices?=
, Is
> > > > > it
> > > > > necessary to install usbclerk in Windows clients to redirect US=
B to
> > > > > > the
> > > > > > Windows guest?
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > usbredir drivers yes, you need them, they should be on the guest
> > > > > tools
> > > > > iso
> > >=20
> >=20
>=20
=20
> > > > > Thanks,
> > >=20
> >=20
>=20
=20
> > > > > michal
> > >=20
> >=20
>=20
=20
> > > > > > Many thanks in advanced,
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > Juanjo.
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek <
> > > > > > michal.skrivanek(a)redhat.com > wrote:
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > On Nov 10, 2014, at 17:54 , Juan Jose <
jj197005(a)gmail.com > wr=
ote:
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > > Hello everybody,
> > > > > >=20
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > I have an oVirt 3.4 deployment and I
have some Windows 7
> > > > > > Enterprise
> > > > > > 32
> > > > > > bits
> > > > > > guests. I can't redirect USB from a Windows 7 client.
I'm usi=
ng
> > > > > > remote
> > > > > > -
> > > > > > viewer as console. Also I have observed something wrong in
my
> > > > > > administration
> > > > > > portal. The oVirt documentation says that I have to select
Na=
tive
> > > > > > > USB
> > > > > > > mode
> > > > > > > in console properties in VM configuration
> > > > > >=20
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > yes, that's the only supported way
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > you should see the USB controller in devices
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > but after select this mode, it
doesn't remain. If I check thi=
s
> > > > > > value
> > > > > > in
> > > > > > console configuration again I can see disabled, native mode
v=
alue
> > > > > > > have
> > > > > > > been
> > > > > > > changed.
> > > > > >=20
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > there used to be such issue in 3.4..it is fixed in 3.5
already.
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > It should be a UI problem only=E2=80=A6
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > Thanks,
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > michal
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > Is there someone have had this
problem?, and how I can solve =
it?,
> > > > > > > is
> > > > > > > it
> > > > > > > necessary to install in Windows clients us clerk
software?
> > > > > >=20
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > > Many thanks in advanced.
> > > > > >=20
> > > > >=20
> > >=20
> >=20
>=20
=20
> > > > > > Juanjo.
> > > > >
>=20
> > > > >=20
> > >=20
> >=20
>=20
=20
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
------=_Part_19165193_377790850.1417076803762
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: Arial; font-size: 10pt; color:
#0000=
00"><div>Maybe this should be added to the oVirt
wiki?</div><div><br></div>=
<div><br></div><div>Yaniv</div><div><br></div><hr
id=3D"zwchr"><blockquote =
style=3D"border-left:2px solid #1010FF;margin-left:5px;padding-left:5px;col=
or:#000;font-weight:normal;font-style:normal;text-decoration:none;font-fami=
ly:Helvetica,Arial,sans-serif;font-size:12pt;" data-mce-style=3D"border-lef=
t: 2px solid #1010FF; margin-left: 5px; padding-left: 5px; color: #000; fon=
t-weight: normal; font-style: normal; text-decoration: none; font-family: H=
elvetica,Arial,sans-serif; font-size: 12pt;"><b>From: </b>"Juan
Jose" <j=
j197005(a)gmail.com&gt;<br><b>To:
</b>uril(a)redhat.com<br><b>Cc: </b>"users@ov=
irt.org List" &lt;users(a)ovirt.org&gt;, "Lev Veyde"
&lt;lveyde(a)redhat.com&gt=
;<br><b>Sent: </b>Wednesday, November 26, 2014 2:46:40
PM<br><b>Subject: </=
b>Re: [ovirt-users] USB redirect<br><div><br></div><div
dir=3D"ltr"><div><d=
iv>Thank you very much Uri and
everybody,<br><div><br></div></div>Best rega=
rds,<br><div><br></div></div>Juanjo.<br></div><div
class=3D"gmail_extra"><b=
r><div class=3D"gmail_quote">On Wed, Nov 26, 2014 at 1:01 PM, Uri
Lublin <s=
pan dir=3D"ltr"><<a href=3D"mailto:uril@redhat.com"
target=3D"_blank" da=
ta-mce-href=3D"mailto:uril@redhat.com">uril@redhat.com</a>></span>
wrote=
:<br><blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-le=
ft:1px #ccc solid;padding-left:1ex" data-mce-style=3D"margin: 0 0 0 .8ex; b=
order-left: 1px #ccc solid; padding-left: 1ex;"><span
class=3D""><span clas=
s=3D"">On 11/23/2014 10:42 AM, Lev Veyde
wrote:<br></span></span><blockquot=
e class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc
sol=
id;padding-left:1ex" data-mce-style=3D"margin: 0 0 0 .8ex; border-left: 1px=
#ccc solid; padding-left: 1ex;">Hi Michal,<br> <br> As far as I know
there=
is no need to install something inside VM for the Native USB redirection t=
o function properly, thus nothing related is included on the oVirt WGT ISO.=
<br></blockquote> Hi,<br> <br> Lev, you are correct; there is
nothing to in=
stall on the guest for Spice Native USB.<br> <br> On the client side there =
is a need for remote-viewer to be configured with USB redir enabled,<br> an=
d having access to the device (via libusb).<br> On a Windows client current=
ly we use WinUSB driver to enable access to the USB device.<br> The driver =
can be installed using the usbclerk service or manually (e.g. with Zadig).<=
br> It must be installed for each device to be redirected.<br> <br> On
Ovir=
t, as mentioned, Native Spice USB option has to be enabled.<br> (This would=
also add the virtual usb devices needed on the qemu-kvm/spice-server side)=
.<br> <br> Hope that helps,<br> Uri.<div
class=3D"HOEnZb"><div =
class=3D"h5"><br> <br><blockquote
class=3D"gmail_quote" style=3D"margin:0 0=
0 .8ex;border-left:1px #ccc solid;padding-left:1ex" data-mce-style=3D"marg=
in: 0 0 0 .8ex; border-left: 1px #ccc solid; padding-left: 1ex;"><br> The
u=
ser/admin only needs to properly configure the VM for Native USB redirectio=
n and install the Spice client.<br> <br> I forwarded the issue to the Spice=
team, they could properly point to the issue.<br> <br> Thanks in
advance,<=
br> Lev Veyde.<br> <br> ----- Original Message -----<br> From:
"Michal Skri=
vanek" <<a href=3D"mailto:michal.skrivanek@redhat.com"
target=3D"_blank"=
data-mce-href=3D"mailto:michal.skrivanek@redhat.com">michal.skrivanek@redh=
at.com</a>><br> To: "Juan Jose" <<a
href=3D"mailto:jj197005@gmail.com=
" target=3D"_blank"
data-mce-href=3D"mailto:jj197005@gmail.com">jj197005@gm=
ail.com</a>>, "Lev Veyde" <<a
href=3D"mailto:lveyde@redhat.com" targe=
t=3D"_blank"
data-mce-href=3D"mailto:lveyde@redhat.com">lveyde@redhat.com</=
a>><br> Cc: "<a href=3D"mailto:users@ovirt.org"
target=3D"_blank" data-m=
ce-href=3D"mailto:users@ovirt.org">users@ovirt.org</a> List"
<<a href=3D=
"mailto:users@ovirt.org" target=3D"_blank"
data-mce-href=3D"mailto:users@ov=
irt.org">users(a)ovirt.org</a>&gt;<br> Sent: Friday, November 21,
2014 3:07:0=
9 PM<br> Subject: Re: [ovirt-users] USB redirect<br> <br> <br> On
Nov 13, 2=
014, at 12:00 , Juan Jose <<a href=3D"mailto:jj197005@gmail.com"
target=
=3D"_blank"
data-mce-href=3D"mailto:jj197005@gmail.com">jj197005@gmail.com<=
/a>> wrote:<br> <br><blockquote class=3D"gmail_quote"
style=3D"margin:0 =
0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex" data-mce-style=3D"mar=
gin: 0 0 0 .8ex; border-left: 1px #ccc solid; padding-left: 1ex;">Hello Mic=
hal and everybody,<br> <br> I'm sorry but I have downloaded
ovirt-guest-too=
ls from URL you gave me but the driver usbredir is not there. Is it normal =
or maybe it is in another resource?<br> <br> As the oVirt documentation say=
s, when this driver is installed a new USB windows service will be started =
in the client, but after execute the ovirt-guest-tool setup and finish the =
installation there is not any USB new service in my Windows client.<br> <br=
Is it possible that this usbredir driver is not in this
ISO?<br></blockqu=
ote>adding Lev who builds the ISO=E2=80=A6can you
please check?<br> <br> Th=
anks,<br> michal<br> <br><blockquote class=3D"gmail_quote"
style=3D"margin:=
0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex" data-mce-style=3D"m=
argin: 0 0 0 .8ex; border-left: 1px #ccc solid; padding-left: 1ex;">Many th=
anks in advanced,<br> <br> Juanjo.<br> <br> On Wed, Nov 12, 2014
at 4:55 PM=
, Juan Jose <<a href=3D"mailto:jj197005@gmail.com"
target=3D"_blank" dat=
a-mce-href=3D"mailto:jj197005@gmail.com">jj197005@gmail.com</a>>
wrote:<=
br> Many thanks Michal,<br> <br> I will try it and I will try to upgrade
my=
oVirt 3.4.<br> <br> Thanks again and best regards,<br> <br>
Juanjo.<br> <b=
r> On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <<a
href=3D"mailto:=
michal.skrivanek(a)redhat.com" target=3D"_blank"
data-mce-href=3D"mailto:mich=
al.skrivanek@redhat.com">michal.skrivanek(a)redhat.com</a>&gt;
wrote:<br> <br=
On Nov 12, 2014, at 16:39 , Juan Jose <<a
href=3D"mailto:jj197005@gmai=
l.com" target=3D"_blank"
data-mce-href=3D"mailto:jj197005@gmail.com">jj1970=
05(a)gmail.com</a>&gt; wrote:<br> <br><blockquote
class=3D"gmail_quote" style=
=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex" data-mce=
-style=3D"margin: 0 0 0 .8ex; border-left: 1px #ccc solid; padding-left: 1e=
x;">Hello Michal or everybody,<br> <br> Could you tell me where can I
get o=
r download ovirt-guest-tool.iso?<br></blockquote>Hi,<br> it's a
regular par=
t of the 3.5 release...<br> <a
href=3D"http://resources.ovirt.org/pub/ovirt=
-3.5/iso/ovirt-guest-tools/" target=3D"_blank"
data-mce-href=3D"http://reso=
urces.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/">http://reso...
t.org/<span data-mce-style=3D"text-decoration: underline;"
style=3D"text-de=
coration: underline;"></span>pub/ovirt-3.5/iso/ovirt-guest-<span
data-mce-s=
tyle=3D"text-decoration: underline;" style=3D"text-decoration:
underline;">=
</span>tools/</a><br> enjoy!:)<br> <br> Thanks,<br>
michal<br> <br><blockqu=
ote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc
s=
olid;padding-left:1ex" data-mce-style=3D"margin: 0 0 0 .8ex; border-left: 1=
px #ccc solid; padding-left: 1ex;">Many thanks in advanced,<br> <br>
Juanjo=
.<br> <br> <br> On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
<<a h=
ref=3D"mailto:michal.skrivanek@redhat.com" target=3D"_blank"
data-mce-href=
=3D"mailto:michal.skrivanek@redhat.com">michal.skrivanek@redhat.com</a>>=
wrote:<br> <br> On Nov 11, 2014, at 11:08 , Juan Jose <<a
href=3D"mailt=
o:jj197005@gmail.com" target=3D"_blank"
data-mce-href=3D"mailto:jj197005@gm=
ail.com">jj197005(a)gmail.com</a>&gt; wrote:<br>
<br><blockquote class=3D"gma=
il_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-lef=
t:1ex" data-mce-style=3D"margin: 0 0 0 .8ex; border-left: 1px #ccc solid; p=
adding-left: 1ex;">Thank you very much Michal, If I have checked Device adm=
inistrator in my Windows 7 VM and as you can see in the attached image, the=
USB device is correctly installed. But when I click "File" in remote-viewe=
r "USB device selection" appears in grey and I can't select any USB
device.=
<br> <br> Is there any other requirement to be able redirect USB devices?, =
Is it necessary to install usbclerk in Windows clients to redirect USB to t=
he Windows guest?<br></blockquote>usbredir drivers yes, you need them, they=
should be on the guest tools iso<br> <br> Thanks,<br> michal<br>
<br><bloc=
kquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px
#cc=
c solid;padding-left:1ex" data-mce-style=3D"margin: 0 0 0 .8ex; border-left=
: 1px #ccc solid; padding-left: 1ex;">Many thanks in advanced,<br>
<br> Jua=
njo.<br> <br> On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek <<a
href=
=3D"mailto:michal.skrivanek@redhat.com" target=3D"_blank"
data-mce-href=3D"=
mailto:michal.skrivanek@redhat.com">michal.skrivanek@redhat.com</a>>
wro=
te:<br> <br> On Nov 10, 2014, at 17:54 , Juan Jose <<a
href=3D"mailto:jj=
197005(a)gmail.com" target=3D"_blank"
data-mce-href=3D"mailto:jj197005@gmail.=
com">jj197005(a)gmail.com</a>&gt; wrote:<br>
<br><blockquote class=3D"gmail_q=
uote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1e=
x" data-mce-style=3D"margin: 0 0 0 .8ex; border-left: 1px #ccc solid; paddi=
ng-left: 1ex;">Hello everybody,<br> <br> I have an oVirt 3.4
deployme=
nt and I have some Windows 7 Enterprise 32 bits guests. I can't redirect US=
B from a Windows 7 client. I'm using remote - viewer as console. Also I hav=
e observed something wrong in my administration portal. The oVirt documenta=
tion says that I have to select Native USB mode in console properties in VM=
configuration<br></blockquote>yes, that's the only supported
way<br> you s=
hould see the USB controller in devices<br> <br><blockquote
class=3D"gmail_=
quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1=
ex" data-mce-style=3D"margin: 0 0 0 .8ex; border-left: 1px #ccc solid; padd=
ing-left: 1ex;">but after select this mode, it doesn't remain. If I check t=
his value in console configuration again I can see disabled, native m=
ode value have been changed.<br></blockquote>there used to be such issue in=
3.4..it is fixed in 3.5 already.<br> It should be a UI problem only=E2=80=
=A6<br> <br> Thanks,<br> michal<br> <br><blockquote
class=3D"gmail_quote" s=
tyle=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex" data=
-mce-style=3D"margin: 0 0 0 .8ex; border-left: 1px #ccc solid; padding-left=
: 1ex;">Is there someone have had this problem?, and how I can solve it?, i=
s it necessary to install in Windows clients us clerk software?<br> <br> Ma=
ny thanks in advanced.<br> <br> Juanjo.<br>
<br></blockquote></blockquote><=
/blockquote></blockquote></blockquote></div></div></blockquote></div><br></=
div><br>_______________________________________________<br>Users mailing
li=
st<br>Users@ovirt.org<br>http://lists.ovirt.org/mailman/listinfo/users<br><=
/blockquote><div><br></div></div></body></html>
------=_Part_19165193_377790850.1417076803762--
3447
days inactive
3461
days old
8 comments
6 participants
participants (6)
-
David Jaša -
Juan Jose -
Lev Veyde -
Michal Skrivanek -
Uri Lublin -
Yaniv Dary