8:58 a.m.
Hello,
I'm trying to setup all in one 3.5.2.1 on CentOS 7.1 but it seems that the
ovirtmgmt bridge has not been created and the host and storage domain parts
failed to install.
Some preliminary questions:
- Is NetworkManager supported now in 3.5.2? Or should I disable it before
engine setup?
- Where should I found engine and host part setup network config files at
the end if not in /etc/sysconfig/network-scripts?
BTW: is network unified persistence feature, as described here:
http://www.ovirt.org/Feature/NetworkReloaded
configured as the default now or not?
I see that from OS point of view both network and NetworkManager services
are enabled (after engine-setup, I didn't check before it):
[root@ovirt71 NetworkManager]# systemctl status network
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: active (exited) since Wed 2015-05-20 15:24:11 CEST; 14min ago
Process: 1157 ExecStart=/etc/rc.d/init.d/network start (code=exited,
status=0/SUCCESS)
May 20 15:24:10 ovirt71.localdomain.local systemd[1]: Starting LSB: Bring
up/down networking...
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Bringing up
loopback interface: Could...o'
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Could not load
file '/etc/sysconfig/ne...o'
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Could not load
file '/etc/sysconfig/ne...o'
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Could not load
file '/etc/sysconfig/ne...o'
May 20 15:24:11 ovirt71.localdomain.local network[1157]: [ OK ]
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Bringing up
interface eth0: [ OK ]
May 20 15:24:11 ovirt71.localdomain.local systemd[1]: Started LSB: Bring
up/down networking.
Hint: Some lines were ellipsized, use -l to show in full.
[root@ovirt71 NetworkManager]# systemctl status NetworkManager
NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: active (running) since Wed 2015-05-20 15:24:05 CEST; 14min ago
Main PID: 768 (NetworkManager)
CGroup: /system.slice/NetworkManager.service
└─768 /usr/sbin/NetworkManager --no-daemon
May 20 15:24:06 ovirt71.localdomain.local NetworkManager[768]: <info>
Policy set 'eth0' (eth0) ....
May 20 15:24:06 ovirt71.localdomain.local NetworkManager[768]: <info>
(eth0): Activation: succe....
May 20 15:24:10 ovirt71.localdomain.local NetworkManager[768]: <info>
startup complete
May 20 15:24:11 ovirt71.localdomain.local NetworkManager[768]: <info>
parsing /etc/sysconfig/ne....
May 20 15:24:11 ovirt71.localdomain.local NetworkManager[768]: <info>
parsing /etc/sysconfig/ne....
May 20 15:24:11 ovirt71.localdomain.local NetworkManager[768]: <info>
parsing /etc/sysconfig/ne....
May 20 15:24:11 ovirt71.localdomain.local NetworkManager[768]: <info>
parsing /etc/sysconfig/ne....
May 20 15:24:16 ovirt71.localdomain.local NetworkManager[768]: <info>
(;vdsmdummy;): carrier is OFF
May 20 15:24:16 ovirt71.localdomain.local NetworkManager[768]: <info>
(;vdsmdummy;): new Bridge...)
May 20 15:24:16 ovirt71.localdomain.local NetworkManager[768]: <info>
(;vdsmdummy;): exported a...3
Hint: Some lines were ellipsized, use -l to show in full.
The host part failed to install during setup :
[ ERROR ] The VDSM host was found in a failed state. Please check engine
and bootstrap installation logs.
[WARNING] Local storage domain not added because the VDSM host was not up.
Please add it manually.
After reboot
[root@ovirt71 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 52:54:00:fa:1e:b7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.72/24 brd 192.168.122.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fefa:1eb7/64 scope link
valid_lft forever preferred_lft forever
3: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 22:9e:ab:c2:99:30 brd ff:ff:ff:ff:ff:ff
4: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 42:76:96:46:b2:1f brd ff:ff:ff:ff:ff:ff
engine setup log (in gzip format):
https://drive.google.com/file/d/0BwoPbcrMv8mvV3E5U2Z5V2R0YnM/view?usp=sha...
various log files are here to read (in tar gzip format):
https://drive.google.com/file/d/0BwoPbcrMv8mvNFgzanBVMUt5aTQ/view?usp=sha...
workflow of engine setup:
[root@ovirt71 ~]# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging.conf']
Log file:
/var/log/ovirt-engine/setup/ovirt-engine-setup-20150520151505-rtk8we.log
Version: otopi-1.3.1 (otopi-1.3.1-1.el7)
[ INFO ] Hardware supports virtualization
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization
--== PRODUCT OPTIONS ==--
Configure Engine on this host (Yes, No) [Yes]:
Configure WebSocket Proxy on this host (Yes, No) [Yes]:
--== PACKAGES ==--
[ INFO ] Checking for product updates...
[ INFO ] No product updates found
--== ALL IN ONE CONFIGURATION ==--
Configure VDSM on this host? (Yes, No) [No]: Yes
Local storage domain path [/var/lib/images]:
Local storage domain name [local_storage]:
--== NETWORK CONFIGURATION ==--
Setup can automatically configure the firewall on this system.
Note: automatic configuration of the firewall may overwrite
current settings.
Do you want Setup to configure the firewall? (Yes, No) [Yes]:
[ INFO ] firewalld will be configured as firewall manager.
Host fully qualified DNS name of this server
[ovirt71.localdomain.local]:
[WARNING] Failed to resolve ovirt71.localdomain.local using DNS, it can be
resolved only locally
[WARNING] Failed to resolve ovirt71.localdomain.local using DNS, it can be
resolved only locally
--== DATABASE CONFIGURATION ==--
Where is the Engine database located? (Local, Remote) [Local]:
Setup can configure the local postgresql server automatically for
the engine to run. This may conflict with existing applications.
Would you like Setup to automatically configure postgresql and
create Engine database, or prefer to perform that manually? (Automatic,
Manual) [Automatic]:
--== OVIRT ENGINE CONFIGURATION ==--
Engine admin password:
Confirm engine admin password:
[WARNING] Password is weak: it is based on a dictionary word
Use weak password? (Yes, No) [No]: Yes
Application mode (Virt, Gluster, Both) [Both]:
--== PKI CONFIGURATION ==--
Organization name for certificate [localdomain.local]:
--== APACHE CONFIGURATION ==--
Setup can configure the default page of the web server to present
the application home page. This may conflict with existing applications.
Do you wish to set the application as the default page of the web
server? (Yes, No) [Yes]:
Setup can configure apache to use SSL using a certificate issued
from the internal CA.
Do you wish Setup to configure that, or prefer to perform that
manually? (Automatic, Manual) [Automatic]:
--== SYSTEM CONFIGURATION ==--
Configure an NFS share on this server to be used as an ISO
Domain? (Yes, No) [Yes]:
Local ISO domain path [/var/lib/exports/iso]:
Local ISO domain ACL - note that the default will restrict access
to ovirt71.localdomain.local only, for security reasons
[ovirt71.localdomain.local(rw)]:
Local ISO domain name [ISO_DOMAIN]:
--== MISC CONFIGURATION ==--
--== END OF CONFIGURATION ==--
[ INFO ] Stage: Setup validation
[WARNING] Less than 16384MB of memory is available
--== CONFIGURATION PREVIEW ==--
Application mode : both
Firewall manager : firewalld
Update Firewall : True
Host FQDN :
ovirt71.localdomain.local
Engine database name : engine
Engine database secured connection : False
Engine database host : localhost
Engine database user name : engine
Engine database host name validation : False
Engine database port : 5432
Engine installation : True
NFS setup : True
PKI organization : localdomain.local
NFS mount point : /var/lib/exports/iso
NFS export ACL :
ovirt71.localdomain.local(rw)
Configure VDSM on this host : True
Local storage domain directory : /var/lib/images
Configure local Engine database : True
Set application as default page : True
Configure Apache SSL : True
Configure WebSocket Proxy : True
Engine Host FQDN :
ovirt71.localdomain.local
Please confirm installation settings (OK, Cancel) [OK]:
[ INFO ] Stage: Transaction setup
[ INFO ] Stopping engine service
[ INFO ] Stopping ovirt-fence-kdump-listener service
[ INFO ] Stopping websocket-proxy service
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Initializing PostgreSQL
[ INFO ] Creating PostgreSQL 'engine' database
[ INFO ] Configuring PostgreSQL
[ INFO ] Creating/refreshing Engine database schema
[ INFO ] Creating CA
[ INFO ] Configuring WebSocket Proxy
[ INFO ] Generating post install configuration file
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'
[ INFO ] Stage: Transaction commit
[ INFO ] Stage: Closing up
[ INFO ] Restarting nfs services
--== SUMMARY ==--
[WARNING] Less than 16384MB of memory is available
SSH fingerprint: A5:E7:85:D5:6B:A9:1C:81:22:90:F3:ED:6C:B0:AD:5B
Internal CA
D6:0B:FA:EC:F1:D7:48:50:96:6E:E2:48:8E:87:39:13:0E:70:85:F8
Web access is enabled at:
http://ovirt71.localdomain.local:80/ovirt-engine
https://ovirt71.localdomain.local:443/ovirt-engine
Please use the user "admin" and password specified in order to
login
--== END OF SUMMARY ==--
[ INFO ] Starting engine service
[ INFO ] Restarting httpd
[ INFO ] Waiting for VDSM host to become operational. This may take
several minutes...
[ ERROR ] The VDSM host was found in a failed state. Please check engine
and bootstrap installation logs.
[WARNING] Local storage domain not added because the VDSM host was not up.
Please add it manually.
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20150520151505-rtk8we.log
[ INFO ] Generating answer file
'/var/lib/ovirt-engine/setup/answers/20150520152046-setup.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ INFO ] Execution of setup completed successfully
Thanks in advance,
Gianluca
2:42 a.m.
Il 20/05/2015 15:58, Gianluca Cecchi ha scritto:
Hello,
I'm trying to setup all in one 3.5.2.1 on CentOS 7.1 but it seems that the ovirtmgmt
bridge has not been created and the host and storage domain parts
failed to install.
Some preliminary questions:
- Is NetworkManager supported now in 3.5.2? Or should I disable it before engine setup?
- Where should I found engine and host part setup network config files at the end if not
in /etc/sysconfig/network-scripts?
BTW: is network unified persistence feature, as described here:
http://www.ovirt.org/Feature/NetworkReloaded
configured as the default now or not?
I see that from OS point of view both network and NetworkManager services are enabled
(after engine-setup, I didn't check before it):
[root@ovirt71 NetworkManager]# systemctl status network
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: active (exited) since Wed 2015-05-20 15:24:11 CEST; 14min ago
Process: 1157 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=0/SUCCESS)
May 20 15:24:10 ovirt71.localdomain.local systemd[1]: Starting LSB: Bring up/down
networking...
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Bringing up loopback interface:
Could...o'
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Could not load file
'/etc/sysconfig/ne...o'
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Could not load file
'/etc/sysconfig/ne...o'
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Could not load file
'/etc/sysconfig/ne...o'
May 20 15:24:11 ovirt71.localdomain.local network[1157]: [ OK ]
May 20 15:24:11 ovirt71.localdomain.local network[1157]: Bringing up interface eth0: [
OK ]
May 20 15:24:11 ovirt71.localdomain.local systemd[1]: Started LSB: Bring up/down
networking.
Hint: Some lines were ellipsized, use -l to show in full.
[root@ovirt71 NetworkManager]# systemctl status NetworkManager
NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: active (running) since Wed 2015-05-20 15:24:05 CEST; 14min ago
Main PID: 768 (NetworkManager)
CGroup: /system.slice/NetworkManager.service
└─768 /usr/sbin/NetworkManager --no-daemon
May 20 15:24:06 ovirt71.localdomain.local NetworkManager[768]: <info> Policy set
'eth0' (eth0) ....
May 20 15:24:06 ovirt71.localdomain.local NetworkManager[768]: <info> (eth0):
Activation: succe....
May 20 15:24:10 ovirt71.localdomain.local NetworkManager[768]: <info> startup
complete
May 20 15:24:11 ovirt71.localdomain.local NetworkManager[768]: <info> parsing
/etc/sysconfig/ne....
May 20 15:24:11 ovirt71.localdomain.local NetworkManager[768]: <info> parsing
/etc/sysconfig/ne....
May 20 15:24:11 ovirt71.localdomain.local NetworkManager[768]: <info> parsing
/etc/sysconfig/ne....
May 20 15:24:11 ovirt71.localdomain.local NetworkManager[768]: <info> parsing
/etc/sysconfig/ne....
May 20 15:24:16 ovirt71.localdomain.local NetworkManager[768]: <info>
(;vdsmdummy;): carrier is OFF
May 20 15:24:16 ovirt71.localdomain.local NetworkManager[768]: <info>
(;vdsmdummy;): new Bridge...)
May 20 15:24:16 ovirt71.localdomain.local NetworkManager[768]: <info>
(;vdsmdummy;): exported a...3
Hint: Some lines were ellipsized, use -l to show in full.
The host part failed to install during setup :
[ ERROR ] The VDSM host was found in a failed state. Please check engine and bootstrap
installation logs.
[WARNING] Local storage domain not added because the VDSM host was not up. Please add it
manually.
Can you please provide a sos report / log-collector report?
After reboot
[root@ovirt71 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen
1000
link/ether 52:54:00:fa:1e:b7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.72/24 <http://192.168.122.72/24> brd 192.168.122.255 scope
global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fefa:1eb7/64 scope link
valid_lft forever preferred_lft forever
3: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 22:9e:ab:c2:99:30 brd ff:ff:ff:ff:ff:ff
4: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 42:76:96:46:b2:1f brd ff:ff:ff:ff:ff:ff
engine setup log (in gzip format):
https://drive.google.com/file/d/0BwoPbcrMv8mvV3E5U2Z5V2R0YnM/view?usp=sha...
various log files are here to read (in tar gzip format):
https://drive.google.com/file/d/0BwoPbcrMv8mvNFgzanBVMUt5aTQ/view?usp=sha...
workflow of engine setup:
[root@ovirt71 ~]# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging.conf']
Log file:
/var/log/ovirt-engine/setup/ovirt-engine-setup-20150520151505-rtk8we.log
Version: otopi-1.3.1 (otopi-1.3.1-1.el7)
[ INFO ] Hardware supports virtualization
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization
--== PRODUCT OPTIONS ==--
Configure Engine on this host (Yes, No) [Yes]:
Configure WebSocket Proxy on this host (Yes, No) [Yes]:
--== PACKAGES ==--
[ INFO ] Checking for product updates...
[ INFO ] No product updates found
--== ALL IN ONE CONFIGURATION ==--
Configure VDSM on this host? (Yes, No) [No]: Yes
Local storage domain path [/var/lib/images]:
Local storage domain name [local_storage]:
--== NETWORK CONFIGURATION ==--
Setup can automatically configure the firewall on this system.
Note: automatic configuration of the firewall may overwrite current settings.
Do you want Setup to configure the firewall? (Yes, No) [Yes]:
[ INFO ] firewalld will be configured as firewall manager.
Host fully qualified DNS name of this server [ovirt71.localdomain.local]:
[WARNING] Failed to resolve ovirt71.localdomain.local using DNS, it can be resolved only
locally
[WARNING] Failed to resolve ovirt71.localdomain.local using DNS, it can be resolved only
locally
--== DATABASE CONFIGURATION ==--
Where is the Engine database located? (Local, Remote) [Local]:
Setup can configure the local postgresql server automatically for the engine to
run. This may conflict with existing applications.
Would you like Setup to automatically configure postgresql and create Engine
database, or prefer to perform that manually? (Automatic,
Manual) [Automatic]:
--== OVIRT ENGINE CONFIGURATION ==--
Engine admin password:
Confirm engine admin password:
[WARNING] Password is weak: it is based on a dictionary word
Use weak password? (Yes, No) [No]: Yes
Application mode (Virt, Gluster, Both) [Both]:
--== PKI CONFIGURATION ==--
Organization name for certificate [localdomain.local]:
--== APACHE CONFIGURATION ==--
Setup can configure the default page of the web server to present the
application home page. This may conflict with existing applications.
Do you wish to set the application as the default page of the web server? (Yes,
No) [Yes]:
Setup can configure apache to use SSL using a certificate issued from the
internal CA.
Do you wish Setup to configure that, or prefer to perform that manually?
(Automatic, Manual) [Automatic]:
--== SYSTEM CONFIGURATION ==--
Configure an NFS share on this server to be used as an ISO Domain? (Yes, No)
[Yes]:
Local ISO domain path [/var/lib/exports/iso]:
Local ISO domain ACL - note that the default will restrict access to
ovirt71.localdomain.local only, for security reasons
[ovirt71.localdomain.local(rw)]:
Local ISO domain name [ISO_DOMAIN]:
--== MISC CONFIGURATION ==--
--== END OF CONFIGURATION ==--
[ INFO ] Stage: Setup validation
[WARNING] Less than 16384MB of memory is available
--== CONFIGURATION PREVIEW ==--
Application mode : both
Firewall manager : firewalld
Update Firewall : True
Host FQDN : ovirt71.localdomain.local
Engine database name : engine
Engine database secured connection : False
Engine database host : localhost
Engine database user name : engine
Engine database host name validation : False
Engine database port : 5432
Engine installation : True
NFS setup : True
PKI organization : localdomain.local
NFS mount point : /var/lib/exports/iso
NFS export ACL : ovirt71.localdomain.local(rw)
Configure VDSM on this host : True
Local storage domain directory : /var/lib/images
Configure local Engine database : True
Set application as default page : True
Configure Apache SSL : True
Configure WebSocket Proxy : True
Engine Host FQDN : ovirt71.localdomain.local
Please confirm installation settings (OK, Cancel) [OK]:
[ INFO ] Stage: Transaction setup
[ INFO ] Stopping engine service
[ INFO ] Stopping ovirt-fence-kdump-listener service
[ INFO ] Stopping websocket-proxy service
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Initializing PostgreSQL
[ INFO ] Creating PostgreSQL 'engine' database
[ INFO ] Configuring PostgreSQL
[ INFO ] Creating/refreshing Engine database schema
[ INFO ] Creating CA
[ INFO ] Configuring WebSocket Proxy
[ INFO ] Generating post install configuration file
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'
[ INFO ] Stage: Transaction commit
[ INFO ] Stage: Closing up
[ INFO ] Restarting nfs services
--== SUMMARY ==--
[WARNING] Less than 16384MB of memory is available
SSH fingerprint: A5:E7:85:D5:6B:A9:1C:81:22:90:F3:ED:6C:B0:AD:5B
Internal CA D6:0B:FA:EC:F1:D7:48:50:96:6E:E2:48:8E:87:39:13:0E:70:85:F8
Web access is enabled at:
http://ovirt71.localdomain.local:80/ovirt-engine
https://ovirt71.localdomain.local:443/ovirt-engine
Please use the user "admin" and password specified in order to login
--== END OF SUMMARY ==--
[ INFO ] Starting engine service
[ INFO ] Restarting httpd
[ INFO ] Waiting for VDSM host to become operational. This may take several minutes...
[ ERROR ] The VDSM host was found in a failed state. Please check engine and bootstrap
installation logs.
[WARNING] Local storage domain not added because the VDSM host was not up. Please add it
manually.
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20150520151505-rtk8we.log
[ INFO ] Generating answer file
'/var/lib/ovirt-engine/setup/answers/20150520152046-setup.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ INFO ] Execution of setup completed successfully
Thanks in advance,
Gianluca
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
6:08 a.m.
This is a multi-part message in MIME format.
--------------070303040904040602070001
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Hi=2C
While running =22yum update=22 I get a timeout error on the patternfly repo=
=3A
http=3A//copr-be=2Ecloud=2Efedoraproject=2Eorg/results/patternfly/patte=
rnfly1/epel-6-x86=5F64/repodata/repomd=2Exml=3A
=5BErrno 12=5D Timeout on
http=3A//copr-be=2Ecloud=2Efedoraproject=2Eorg/results/patternfly/patte=
rnfly1/epel-6-x86=5F64/repodata/repomd=2Exml=3A
=2828=2C =27connect=28=29 timed out!=27=29
The url is not available=2C do I need to switch url=3F It=27s still 3=2E5=
=2E
Met vriendelijke groet=2C With kind regards=2C
Jorick Astrego
Netbulae Virtualization Experts=20
----------------
=09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK=
08198180
=09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW=
NL821234584B01
----------------
--------------070303040904040602070001
Content-Type: text/html;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
=3Chtml=3E
=3Chead=3E
=3Cmeta content=3D=22text/html=3B charset=3Dutf-8=22 http-equiv=3D=22Co=
ntent-Type=22=3E
=3C/head=3E
=3Cbody bgcolor=3D=22=23FFFFFF=22 text=3D=22=23000000=22=3E
Hi=2C=3Cbr=3E
=3Cbr=3E
While running =22yum update=22 I get a timeout error on the patternfly=
repo=3A=3Cbr=3E
=3Cbr=3E
=3Cblockquote=3E=3Ca class=3D=22moz-txt-link-freetext=22 href=3D=22http=
=3A//copr-be=2Ecloud=2Efedoraproject=2Eorg/results/patternfly/patternfly1/e=
pel-6-x86=5F64/repodata/repomd=2Exml=22=3Ehttp=3A//copr-be=2Ecloud=2Efedora=
project=2Eorg/results/patternfly/patternfly1/epel-6-x86=5F64/repodata/repom=
d=2Exml=3C/a=3E=3A
=5BErrno 12=5D Timeout on
=3Ca class=3D=22moz-txt-link-freetext=22 href=3D=22http=3A//copr-be=
=2Ecloud=2Efedoraproject=2Eorg/results/patternfly/patternfly1/epel-6-x86=5F=
64/repodata/repomd=2Exml=22=3Ehttp=3A//copr-be=2Ecloud=2Efedoraproject=2Eor=
g/results/patternfly/patternfly1/epel-6-x86=5F64/repodata/repomd=2Exml=3C/a=
=3E=3A
=2828=2C =27connect=28=29 timed out!=27=29=3Cbr=3E
=3Cbr=3E
=3C/blockquote=3E
The url is not available=2C do I need to switch url=3F It=27s still 3=
=2E5=2E=3Cbr=3E
=3Cbr=3E
=3Cbr=3E
=20=
=3CBR /=3E
=3CBR /=3E
=3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c=
olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22=
mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet=
=2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font=
=3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul=
ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B=
border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22=
=3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=
=22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf=
ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid=
th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty=
le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr=
=3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax=
=3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=
=3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130=
px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w=
idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E=
=3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top=
=3A1px solid =23ccc=3B=22=3E=3CBR /=3E
=3C/body=3E
=3C/html=3E
--------------070303040904040602070001--
6:28 a.m.
Il 04/06/2015 13:08, Jorick Astrego ha scritto:
Hi,
While running "yum update" I get a timeout error on the patternfly repo:
http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epe...:
[Errno 12] Timeout on
http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epe...:
(28, 'connect() timed out!')
The url is not available, do I need to switch url? It's still 3.5.
Copr is down: http://status.fedoraproject.org/
**
Met vriendelijke groet, With kind regards,
Jorick Astrego*
Netbulae Virtualization Experts *
------------------------------------------------------------------------------------------------------------------------------------------------------
Tel: 053 20 30 270 info(a)netbulae.eu Staalsteden 4-3A KvK 08198180
Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01
------------------------------------------------------------------------------------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
11:59 a.m.
On Thu, Jun 4, 2015 at 9:42 AM, Sandro Bonazzola <sbonazzo(a)redhat.com>
wrote:
Il 20/05/2015 15:58, Gianluca Cecchi ha scritto:
> Hello,
> I'm trying to setup all in one 3.5.2.1 on CentOS 7.1 but it seems that
the ovirtmgmt bridge has not been created and the host and storage domain
parts
> failed to install.
>
> Some preliminary questions:
> - Is NetworkManager supported now in 3.5.2? Or should I disable it
before engine setup?
> - Where should I found engine and host part setup network config files
at the end if not in /etc/sysconfig/network-scripts?
>
> BTW: is network unified persistence feature, as described here:
> http://www.ovirt.org/Feature/NetworkReloaded
> configured as the default now or not?
>
Can you please provide a sos report / log-collector report?
Output of sosreport here:
https://drive.google.com/file/d/0BwoPbcrMv8mvc0tZQ1ZULWlkcDA/view?usp=sha...
Previously provided links for engine setup:
engine setup log (in gzip format):
https://drive.google.com/file/d/0BwoPbcrMv8mvV3E5U2Z5V2R0YnM/view?usp=sha...
various log files are here to read (in tar gzip format):
https://drive.google.com/file/d/0BwoPbcrMv8mvNFgzanBVMUt5aTQ/view?usp=sha...
Also, what about my questions (I left them in this mail too)?
1:28 a.m.
Il 04/06/2015 18:59, Gianluca Cecchi ha scritto:
On Thu, Jun 4, 2015 at 9:42 AM, Sandro Bonazzola
<sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>> wrote:
Il 20/05/2015 15:58, Gianluca Cecchi ha scritto:
> Hello,
> I'm trying to setup all in one 3.5.2.1 on CentOS 7.1 but it seems that the
ovirtmgmt bridge has not been created and the host and storage domain
parts
> failed to install.
>
> Some preliminary questions:
> - Is NetworkManager supported now in 3.5.2? Or should I disable it before engine
setup?
> - Where should I found engine and host part setup network config files at the
end if not in /etc/sysconfig/network-scripts?
>
> BTW: is network unified persistence feature, as described here:
> http://www.ovirt.org/Feature/NetworkReloaded
> configured as the default now or not?
>
Can you please provide a sos report / log-collector report?
Output of sosreport here:
https://drive.google.com/file/d/0BwoPbcrMv8mvc0tZQ1ZULWlkcDA/view?usp=sha...
Previously provided links for engine setup:
engine setup log (in gzip format):
https://drive.google.com/file/d/0BwoPbcrMv8mvV3E5U2Z5V2R0YnM/view?usp=sha...
various log files are here to read (in tar gzip format):
https://drive.google.com/file/d/0BwoPbcrMv8mvNFgzanBVMUt5aTQ/view?usp=sha...
Also, what about my questions (I left them in this mail too)?
So the setup failed with:
2015-05-20 17:04:05 ERROR otopi.plugins.ovirt_engine_setup.ovirt_engine.all-in-one.vdsm
vdsm._waitVDSMHostUp:76 The VDSM host was found in a failed
state. Please check engine and bootstrap installation logs.
Because:
2015-05-20 17:04:04,638 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.TimeBoundPollVDSCommand]
(org.ovirt.thread.pool-8-thread-3) [774e3967]
Command TimeBoundPollVDSCommand(HostName = local_host, HostId =
28c011d9-e96d-4619-bf07-556b125a293c) execution failed. Exception:
VDSNetworkException: VDSGenericException: VDSNetworkException: Timeout during xml-rpc
call
2015-05-20 17:04:04,639 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.TimeBoundPollVDSCommand]
(org.ovirt.thread.pool-8-thread-3) [774e3967]
Timeout waiting for VDSM response. java.util.concurrent.TimeoutException
2015-05-20 17:04:04,657 ERROR [org.ovirt.engine.core.bll.InstallVdsInternalCommand]
(org.ovirt.thread.pool-8-thread-3) [774e3967] Host installation
failed for host 28c011d9-e96d-4619-bf07-556b125a293c, local_host.:
org.ovirt.engine.core.bll.VdsCommand$VdsInstallException: Host not reachable
When running ovirt-host-deploy, it doesn't create the management bridge:
2015-05-20 17:03:32 DEBUG otopi.context context._executeMethod:138 Stage validation METHOD
otopi.plugins.ovirt_host_deploy.vdsm.bridge.Plugin._validation
2015-05-20 17:03:32 DEBUG otopi.context context._executeMethod:144 condition False
which means that bridge creation has not been requested.
I can't really tell why this happened.
About your pending questions, I'd prefer network team to reply.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
2:04 a.m.
On Fri, Jun 5, 2015 at 8:28 AM, Sandro Bonazzola <sbonazzo(a)redhat.com>
wrote:
When running ovirt-host-deploy, it doesn't create the management bridge:
2015-05-20 17:03:32 DEBUG otopi.context context._executeMethod:138 Stage
validation METHOD
otopi.plugins.ovirt_host_deploy.vdsm.bridge.Plugin._validation
2015-05-20 17:03:32 DEBUG otopi.context context._executeMethod:144
condition False
which means that bridge creation has not been requested.
I can't really tell why this happened.
About your pending questions, I'd prefer network team to reply.
OK, I'll wait for network team to give an insight.
I can redeploy the environment (this AIO is a VM), but before I need to
know for the host part what has to be pre-set on it before running the
engine-setup for AIO.
I can try to reproduce with a separate set of 1 x CentOS 7.1 for engine and
1x CentOS 7.1 for host and see what it happens in this configuration and
compare...
Where can I find the programs run for normal host deploy and for the host
deploy part embedded in AIO?
Gianluca
2:15 a.m.
Il 05/06/2015 09:04, Gianluca Cecchi ha scritto:
On Fri, Jun 5, 2015 at 8:28 AM, Sandro Bonazzola
<sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>> wrote:
When running ovirt-host-deploy, it doesn't create the management bridge:
2015-05-20 17:03:32 DEBUG otopi.context context._executeMethod:138 Stage validation
METHOD
otopi.plugins.ovirt_host_deploy.vdsm.bridge.Plugin._validation
2015-05-20 17:03:32 DEBUG otopi.context context._executeMethod:144 condition False
which means that bridge creation has not been requested.
I can't really tell why this happened.
About your pending questions, I'd prefer network team to reply.
OK, I'll wait for network team to give an insight.
I can redeploy the environment (this AIO is a VM), but before I need to know for the host
part what has to be pre-set on it before running the
engine-setup for AIO.
I can try to reproduce with a separate set of 1 x CentOS 7.1 for engine and 1x CentOS 7.1
for host and see what it happens in this configuration and
compare...
Where can I find the programs run for normal host deploy and for the host deploy part
embedded in AIO?
I'm not sure to have understood the question. The program executed are the same, the
only difference is in the engine-setup plugins called that
performs additional initialization for the data domain and those plugins are in the
all-in-one subpackage of ovirt-engine-setup.
The only difference I'm aware of in calling ovirt-host-deploy is that on AIO the
automatic configuration of the firewall is disabled because it's
already done by the setup.
Gianluca
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
2:29 a.m.
On Fri, Jun 5, 2015 at 9:15 AM, Sandro Bonazzola <sbonazzo(a)redhat.com>
wrote:
I'm not sure to have understood the question. The program executed are the
same, the only difference is in the engine-setup plugins called that
performs additional initialization for the data domain and those plugins
are in the all-in-one subpackage of ovirt-engine-setup.
The only difference I'm aware of in calling ovirt-host-deploy is that on
AIO the automatic configuration of the firewall is disabled because it's
already done by the setup.
>
> Gianluca
I mean:
when you have separate engine + hosts you asynchronously deploy engine with
engine-setup and this command doesn't care at all about host deploy.
Then when you are comfortable, you add a host from the engine gui and here
some program, call it PROGRAM_A I think is called from engine server itself
towards the designated host
when you deploy AIO, the host part is automatically embedded at the end of
engine setup phase and I presume PROGRAM_B is called from the engine itself
towards itself as it is the designated host to deploy
If what I wrote above is correct which is the relation between PROGRAM_A
and PROGRAM_B?
Are they the same? If not, is there the chance that PRGRAM_B has not
aligned to deploy CentOS 7.1 hosts, while PROGRAM_A has been aligned?
Hope to have vlarified my point and doubts about possible problems.
Gianluca
8:10 a.m.
Il 05/06/2015 09:29, Gianluca Cecchi ha scritto:
On Fri, Jun 5, 2015 at 9:15 AM, Sandro Bonazzola
<sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>> wrote:
I'm not sure to have understood the question. The program executed are the same,
the only difference is in the engine-setup plugins called that
performs additional initialization for the data domain and those plugins are in the
all-in-one subpackage of ovirt-engine-setup.
The only difference I'm aware of in calling ovirt-host-deploy is that on AIO the
automatic configuration of the firewall is disabled because it's
already done by the setup.
>
> Gianluca
I mean:
when you have separate engine + hosts you asynchronously deploy engine with engine-setup
and this command doesn't care at all about host deploy.
Then when you are comfortable, you add a host from the engine gui and here some program,
call it PROGRAM_A I think is called from engine server itself
towards the designated host
When a engine + separate host is deployed, engine scp ovirt-host-deploy there and perform
the full host deployment running ovirt-host-deploy.
This includes iptables configuration for vdsm if requested.
when you deploy AIO, the host part is automatically embedded at the
end of engine setup phase and I presume PROGRAM_B is called from the engine itself
towards itself as it is the designated host to deploy
When a engine is deployed AIO, engine-setup takes care of configuring iptables for BOTH
the engine and vdsm and then engine run ovirt-host-deploy on
the system _without_ configuring iptables. engine-setup then takes care of creating the
data domain and attach it to the datacenter.
So PROGRAM_A and PROGRAM_B are the same program, just run with different configuration.
If what I wrote above is correct which is the relation between PROGRAM_A and PROGRAM_B?
Are they the same? If not, is there the chance that PRGRAM_B has not aligned to deploy
CentOS 7.1 hosts, while PROGRAM_A has been aligned?
Hope to have vlarified my point and doubts about possible problems.
Gianluca
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
3257
days inactive
3287
days old
9 comments
3 participants
participants (3)
-
Gianluca Cecchi -
Jorick Astrego -
Sandro Bonazzola