10:51 a.m.
Ovirt newbie here - using v 4.4.4
Have been trying for days to get this installed on my HP DL380p G6. I have 2 disk 170GB
Raid 0 for OS and 6 x 330GB disk Raid 5 for Gluster. DNS all set up (that took some
working out), but I just can't fathom out whats (not) happening here. Block size is
returned as 512.
I've had some help on Reddit where I've been told that Ovirt is seeing my single
local disk ass an multipath device, which it is not/??! I think I removed the flag, but
it still fails here.
So, Gluster install fails quite early through, though it carries on creating all the
volumes (with default settings) but then gives me the 'Deployment Failed' message
:( Here is where it fails....
Any help gratefully received!
TASK [fail] ********************************************************************
task path: /usr/share/cockpit/ovirt-dashboard/ansible/hc_wizard.yml:62
skipping: [ovirt-gluster.whichelo.com] => (item=[{'cmd': 'blockdev --getss
/dev/sdb | grep -Po -q "512" && echo true || echo false\n',
'stdout': 'true', 'stderr': '', 'rc': 0,
'start': '2021-02-07 13:21:10.237701', 'end': '2021-02-07
13:21:10.243111', 'delta': '0:00:00.005410', 'changed': True,
'invocation': {'module_args': {'_raw_params': 'blockdev
--getss /dev/sdb | grep -Po -q "512" && echo true || echo false\n',
'_uses_shell': True, 'warn': True, 'stdin_add_newline': True,
'strip_empty_ends': True, 'argv': None, 'chdir': None,
'executable': None, 'creates': None, 'removes': None,
'stdin': None}}, 'stdout_lines': ['true'], 'stderr_lines':
[], 'failed': False, 'item': {'vgname': 'gluster_vg_sdb',
'pvname': '/dev/sdb'}, 'ansible_loop_var': 'item'},
{'cmd': 'blockdev --getss /dev/sdb | grep -Po -q "4096" &&
echo true || echo false\n', 'stdout': 'false', 'stderr':
'', 'rc': 0, 'start': '2021-02-07 13:21:14.760897',
'end': '2021-02-07 13:21:14.766395', 'delta':
'0:00:00.005498', 'chang
ed': True, 'invocation': {'module_args': {'_raw_params':
'blockdev --getss /dev/sdb | grep -Po -q "4096" && echo true || echo
false\n', '_uses_shell': True, 'warn': True,
'stdin_add_newline': True, 'strip_empty_ends': True, 'argv': None,
'chdir': None, 'executable': None, 'creates': None,
'removes': None, 'stdin': None}}, 'stdout_lines':
['false'], 'stderr_lines': [], 'failed': False, 'item':
{'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'},
'ansible_loop_var': 'item'}]) => {"ansible_loop_var":
"item", "changed": false, "item":
[{"ansible_loop_var": "item", "changed": true,
"cmd": "blockdev --getss /dev/sdb | grep -Po -q \"512\"
&& echo true || echo false\n", "delta": "0:00:00.005410",
"end": "2021-02-07 13:21:10.243111", "failed": false,
"invocation": {"module_args": {"_raw_params": "blockdev
--getss /dev/sdb | grep -Po -q \"512\" && echo true || echo
false\n", "_uses_shell": true, "argv": null, "chdir":
null, "creates": null, "executable": null, "removes": null,
"stdin": null, "
stdin_add_newline": true, "strip_empty_ends": true, "warn":
true}}, "item": {"pvname": "/dev/sdb", "vgname":
"gluster_vg_sdb"}, "rc": 0, "start": "2021-02-07
13:21:10.237701", "stderr": "", "stderr_lines": [],
"stdout": "true", "stdout_lines": ["true"]},
{"ansible_loop_var": "item", "changed": true, "cm
d": "blockdev --getss /dev/sdb | grep -Po -q \"4096\" && echo
true || echo false\n", "delta": "0:00:00.005498",
"end": "2021-02-07 13:21:14.766395", "failed": false,
"invocation": {"module_args": {"_raw_params": "blockdev
--getss /dev/sdb | grep -Po -q \"4096\" && echo true || echo
false\n", "_uses_shell": true, "argv": null, "chdir":
null, "creates": null, "executable": null, "removes": null,
"stdin": null, "stdin_add_newline": true,
"strip_empty_ends": true, "warn": true}}, "item":
{"pvname": "/dev/sdb", "vgname":
"gluster_vg_sdb"}, "rc": 0, "start": "2021-02-07
13:21:14.760897", "stderr": "", "stderr_lines": [],
"stdout": "false", "stdout_lines": ["false"]}],
"skip_reason": "Conditional result was False"}
hc_wizard.yml excerpt:
- name: Check if block device is 4KN
shell: >
blockdev --getss {{ item.pvname }} | grep -Po -q "4096" &&
echo true || echo false
register: is4KN
with_items: "{{ gluster_infra_volume_groups }}"
- fail: ################ THIS IS LINE 62 #####################################
msg: "Mix of 4K and 512 Block devices are not allowed"
with_nested:
- "{{ is512.results }}"
- "{{ is4KN.results }}"
when: item[0].stdout|bool and item[1].stdout|bool
# logical block size of 512 bytes. To disable the check set
# gluster_features_512B_check to false. DELETE the below task once
# OVirt limitation is fixed
- name: Check if disks have logical block size of 512B
command: blockdev --getss {{ item.pvname }}
register: logical_blk_size
when: gluster_infra_volume_groups is defined and
item.pvname is not search("/dev/mapper") and
gluster_features_512B_check|default(false)
Can anyone help?
8:06 p.m.
New subject: Single Node Hyperconverged - Failing Gluster Setup
What is the output of 'lsblk -t' ?
Best Regards,Strahil Nikolov
Ovirt newbie here - using v 4.4.4
Have been trying for days to get this installed on my HP DL380p G6. I have 2 disk 170GB
Raid 0 for OS and 6 x 330GB disk Raid 5 for Gluster. DNS all set up (that took some
working out), but I just can't fathom out whats (not) happening here. Block size is
returned as 512.
I've had some help on Reddit where I've been told that Ovirt is seeing my single
local disk ass an multipath device, which it is not/??! I think I removed the flag, but
it still fails here.
So, Gluster install fails quite early through, though it carries on creating all the
volumes (with default settings) but then gives me the 'Deployment Failed' message
:( Here is where it fails....
Any help gratefully received!
TASK [fail] ********************************************************************
task path: /usr/share/cockpit/ovirt-dashboard/ansible/hc_wizard.yml:62
skipping: [ovirt-gluster.whichelo.com] => (item=[{'cmd': 'blockdev --getss
/dev/sdb | grep -Po -q "512" && echo true || echo false\n',
'stdout': 'true', 'stderr': '', 'rc': 0,
'start': '2021-02-07 13:21:10.237701', 'end': '2021-02-07
13:21:10.243111', 'delta': '0:00:00.005410', 'changed': True,
'invocation': {'module_args': {'_raw_params': 'blockdev
--getss /dev/sdb | grep -Po -q "512" && echo true || echo false\n',
'_uses_shell': True, 'warn': True, 'stdin_add_newline': True,
'strip_empty_ends': True, 'argv': None, 'chdir': None,
'executable': None, 'creates': None, 'removes': None,
'stdin': None}}, 'stdout_lines': ['true'], 'stderr_lines':
[], 'failed': False, 'item': {'vgname': 'gluster_vg_sdb',
'pvname': '/dev/sdb'}, 'ansible_loop_var': 'item'},
{'cmd': 'blockdev --getss /dev/sdb | grep -Po -q "4096" &&
echo true || echo false\n', 'stdout': 'false', 'stderr':
'', 'rc': 0, 'start': '2021-02-07 13:21:14.760897',
'end': '2021-02-07 13:21:14.766395', 'delta':
'0:00:00.005498', 'chang
ed': True, 'invocation': {'module_args': {'_raw_params':
'blockdev --getss /dev/sdb | grep -Po -q "4096" && echo true || echo
false\n', '_uses_shell': True, 'warn': True,
'stdin_add_newline': True, 'strip_empty_ends': True, 'argv': None,
'chdir': None, 'executable': None, 'creates': None,
'removes': None, 'stdin': None}}, 'stdout_lines':
['false'], 'stderr_lines': [], 'failed': False, 'item':
{'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'},
'ansible_loop_var': 'item'}]) => {"ansible_loop_var":
"item", "changed": false, "item":
[{"ansible_loop_var": "item", "changed": true,
"cmd": "blockdev --getss /dev/sdb | grep -Po -q \"512\"
&& echo true || echo false\n", "delta": "0:00:00.005410",
"end": "2021-02-07 13:21:10.243111", "failed": false,
"invocation": {"module_args": {"_raw_params": "blockdev
--getss /dev/sdb | grep -Po -q \"512\" && echo true || echo
false\n", "_uses_shell": true, "argv": null, "chdir":
null, "creates": null, "executable": null, "removes": null,
"stdin": null, "
stdin_add_newline": true, "strip_empty_ends": true, "warn":
true}}, "item": {"pvname": "/dev/sdb", "vgname":
"gluster_vg_sdb"}, "rc": 0, "start": "2021-02-07
13:21:10.237701", "stderr": "", "stderr_lines": [],
"stdout": "true", "stdout_lines": ["true"]},
{"ansible_loop_var": "item", "changed": true, "cm
d": "blockdev --getss /dev/sdb | grep -Po -q \"4096\" && echo
true || echo false\n", "delta": "0:00:00.005498",
"end": "2021-02-07 13:21:14.766395", "failed": false,
"invocation": {"module_args": {"_raw_params": "blockdev
--getss /dev/sdb | grep -Po -q \"4096\" && echo true || echo
false\n", "_uses_shell": true, "argv": null, "chdir":
null, "creates": null, "executable": null, "removes": null,
"stdin": null, "stdin_add_newline": true,
"strip_empty_ends": true, "warn": true}}, "item":
{"pvname": "/dev/sdb", "vgname":
"gluster_vg_sdb"}, "rc": 0, "start": "2021-02-07
13:21:14.760897", "stderr": "", "stderr_lines": [],
"stdout": "false", "stdout_lines": ["false"]}],
"skip_reason": "Conditional result was False"}
hc_wizard.yml excerpt:
- name: Check if block device is 4KN
shell: >
blockdev --getss {{ item.pvname }} | grep -Po -q "4096" && echo
true || echo false
register: is4KN
with_items: "{{ gluster_infra_volume_groups }}"
- fail: ################ THIS IS LINE 62 #####################################
msg: "Mix of 4K and 512 Block devices are not allowed"
with_nested:
- "{{ is512.results }}"
- "{{ is4KN.results }}"
when: item[0].stdout|bool and item[1].stdout|bool
# logical block size of 512 bytes. To disable the check set
# gluster_features_512B_check to false. DELETE the below task once
# OVirt limitation is fixed
- name: Check if disks have logical block size of 512B
command: blockdev --getss {{ item.pvname }}
register: logical_blk_size
when: gluster_infra_volume_groups is defined and
item.pvname is not search("/dev/mapper") and
gluster_features_512B_check|default(false)
Can anyone help?
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BNDBDKC4EBF...
9:54 p.m.
If the disk was previously used, you may need to 'wipefs -a /dev/sdb' to
clean out any previous partitioning, etc.
If the installer can't create the gluster PV, it is often because the drive
needs to be added to the multipath blacklist.
lsblk to find the ID and add it to the /etc/multipath.conf blacklist
[root@ovirtnode2 ~]#lsblk /dev/sdb
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 200G 0 disk
-> 3678da6e715b018f01f1abdb887594aae 253:2 0 200G 0 mpath
edit /etc/multipath.conf and append the disk wwid to multipath.conf blacklist
blacklist {
wwid 3678da6e715b018f01f1abdb887594aae }
then restart the multipathd service
service multipathd restart
On Tue, Feb 9, 2021 at 2:19 PM Strahil Nikolov via Users <users(a)ovirt.org>
wrote:
What is the output of 'lsblk -t' ?
Best Regards,
Strahil Nikolov
Ovirt newbie here - using v 4.4.4
Have been trying for days to get this installed on my HP DL380p G6. I have
2 disk 170GB Raid 0 for OS and 6 x 330GB disk Raid 5 for Gluster. DNS all
set up (that took some working out), but I just can't fathom out whats
(not) happening here. Block size is returned as 512.
I've had some help on Reddit where I've been told that Ovirt is seeing my
single local disk ass an multipath device, which it is not/??! I think I
removed the flag, but it still fails here.
So, Gluster install fails quite early through, though it carries on
creating all the volumes (with default settings) but then gives me the
'Deployment Failed' message :( Here is where it fails....
Any help gratefully received!
TASK [fail]
********************************************************************
task path: /usr/share/cockpit/ovirt-dashboard/ansible/hc_wizard.yml:62
skipping: [ovirt-gluster.whichelo.com] => (item=[{'cmd': 'blockdev
--getss /dev/sdb | grep -Po -q "512" && echo true || echo
false\n',
'stdout': 'true', 'stderr': '', 'rc': 0,
'start': '2021-02-07
13:21:10.237701', 'end': '2021-02-07 13:21:10.243111',
'delta':
'0:00:00.005410', 'changed': True, 'invocation':
{'module_args':
{'_raw_params': 'blockdev --getss /dev/sdb | grep -Po -q "512"
&& echo true
|| echo false\n', '_uses_shell': True, 'warn': True,
'stdin_add_newline':
True, 'strip_empty_ends': True, 'argv': None, 'chdir': None,
'executable':
None, 'creates': None, 'removes': None, 'stdin': None}},
'stdout_lines':
['true'], 'stderr_lines': [], 'failed': False, 'item':
{'vgname':
'gluster_vg_sdb', 'pvname': '/dev/sdb'},
'ansible_loop_var': 'item'},
{'cmd': 'blockdev --getss /dev/sdb | grep -Po -q "4096" &&
echo true ||
echo false\n', 'stdout': 'false', 'stderr': '',
'rc': 0, 'start':
'2021-02-07 13:21:14.760897', 'end': '2021-02-07
13:21:14.766395', 'delta':
'0:00:00.005498', 'chang
ed': True, 'invocation': {'module_args': {'_raw_params':
'blockdev --getss
/dev/sdb | grep -Po -q "4096" && echo true || echo false\n',
'_uses_shell':
True, 'warn': True, 'stdin_add_newline': True,
'strip_empty_ends': True,
'argv': None, 'chdir': None, 'executable': None,
'creates': None,
'removes': None, 'stdin': None}}, 'stdout_lines':
['false'],
'stderr_lines': [], 'failed': False, 'item': {'vgname':
'gluster_vg_sdb',
'pvname': '/dev/sdb'}, 'ansible_loop_var': 'item'}])
=>
{"ansible_loop_var": "item", "changed": false,
"item":
[{"ansible_loop_var": "item", "changed": true,
"cmd": "blockdev --getss
/dev/sdb | grep -Po -q \"512\" && echo true || echo false\n",
"delta":
"0:00:00.005410", "end": "2021-02-07 13:21:10.243111",
"failed": false,
"invocation": {"module_args": {"_raw_params":
"blockdev --getss /dev/sdb |
grep -Po -q \"512\" && echo true || echo false\n",
"_uses_shell": true,
"argv": null, "chdir": null, "creates": null,
"executable": null,
"removes": null, "stdin": null, "
stdin_add_newline": true, "strip_empty_ends": true, "warn":
true}},
"item": {"pvname": "/dev/sdb", "vgname":
"gluster_vg_sdb"}, "rc": 0,
"start": "2021-02-07 13:21:10.237701", "stderr":
"", "stderr_lines": [],
"stdout": "true", "stdout_lines": ["true"]},
{"ansible_loop_var": "item",
"changed": true, "cm
d": "blockdev --getss /dev/sdb | grep -Po -q \"4096\" && echo
true || echo
false\n", "delta": "0:00:00.005498", "end":
"2021-02-07 13:21:14.766395",
"failed": false, "invocation": {"module_args":
{"_raw_params": "blockdev
--getss /dev/sdb | grep -Po -q \"4096\" && echo true || echo
false\n",
"_uses_shell": true, "argv": null, "chdir": null,
"creates": null,
"executable": null, "removes": null, "stdin": null,
"stdin_add_newline":
true, "strip_empty_ends": true, "warn": true}}, "item":
{"pvname":
"/dev/sdb", "vgname": "gluster_vg_sdb"}, "rc": 0,
"start": "2021-02-07
13:21:14.760897", "stderr": "", "stderr_lines": [],
"stdout": "false",
"stdout_lines": ["false"]}], "skip_reason":
"Conditional result was False"}
hc_wizard.yml excerpt:
- name: Check if block device is 4KN
shell: >
blockdev --getss {{ item.pvname }} | grep -Po -q "4096" &&
echo
true || echo false
register: is4KN
with_items: "{{ gluster_infra_volume_groups }}"
- fail: ################ THIS IS LINE 62
#####################################
msg: "Mix of 4K and 512 Block devices are not allowed"
with_nested:
- "{{ is512.results }}"
- "{{ is4KN.results }}"
when: item[0].stdout|bool and item[1].stdout|bool
# logical block size of 512 bytes. To disable the check set
# gluster_features_512B_check to false. DELETE the below task once
# OVirt limitation is fixed
- name: Check if disks have logical block size of 512B
command: blockdev --getss {{ item.pvname }}
register: logical_blk_size
when: gluster_infra_volume_groups is defined and
item.pvname is not search("/dev/mapper") and
gluster_features_512B_check|default(false)
Can anyone help?
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BNDBDKC4EBF...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Z6RJWHCHNDE...
10:34 p.m.
Hi
I've learned a lot today reading, but still not smooth sailing at all!
I'm just doing a fresh install as I did find one way out of my above problem - to
comment out the filters in /etc/lvm/lvm.conf - but I couldn't see why this worked!?
I'm going to clean sdb once install finishes then look at the lsblk output to check
all is well. I had found that sdb was being tagged as type mpath, which I managed to fix
with wipefs.
So hopefully that will be ok this time round.
What I have found is that I'm still having problems working ou t the logic of the
network
The kvm host (ovirt-kvm.whichelo.com) is fixed ip 192.168.0.40 on my 1st nic
Also in my DNS are ovirt-engine.whichelo.com - 192.168.0.50
and ovirt-gluster.whichelo.com on 192.168.0.60
I discovered that adding gluster's ip to that adapter allowed me to move on with
provisioning, but if I add the engine's (.50) I get the he_FQDN resolves to this host
message.
I'm just working out how to use the nic's (machine has 4), bonds and vlans.
Installation always stalls at "waiting for host to be up" - I'm guessing my
dodgy networking is causing problems.
Any help for a newbie would be very welcome! Is there any way to post screenshots?
Thank you so much for trying to help me out! I've found people in the ovirt community
very helpful.
11:01 p.m.
New subject: Single Node Hyperconverged - Failing Gluster Setup
Thanks -for some reason this part of it now makes sense!
5:44 a.m.
New subject: Single Node Hyperconverged - Failing Gluster Setup
When uou create a blacklist file for the multipath, use
/etc/multipath/conf.d/<someconfig>.conf
Best Regards,Strahil Nikolov
Thanks -for some reason this part of it now makes sense!
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JU53JWFMY5E...
1192
days inactive
1193
days old
5 comments
3 participants
participants (3)
-
Edward Berger -
jhamiltonactually＠gmail.com -
Strahil Nikolov