----- Original Message ----- > From: "Mohsen Saeedi"<mohsen.saeedi(a)gmail.com> > To: users(a)ovirt.org > Sent: Tuesday, June 5, 2012 4:24:46 PM > Subject: [Users] Ovirt - double use of PCI Address > > > > > > Hi > > I setup ovirt and some other things. I make a virtual machine (CentOS > 6.2). installed and configured it. then power off it and make a > snapshot and create clone image from it. > > when i trying to start new machine, i got this error: > > 2012-06-05 13:16:15.433+0000: 2375: error : qemuCollectPCIAddress:743 > : XML error: Attempted double use of PCI Address '0:0:2.0' > > I remove the new machine and try to start old machine. i get the > error again! and i'm enable to start old machine. > Can you please attach the engine.log and vdsm.log files?

Are you working with the most updated upstream code?

We had an issue with the monitors, in which the order of the monitor devices is important, as the first one needs to get the address 0:0:2.0, but that issue was fixed. Are you using more than one monitor?

The vdsm.log fill will help a lot here, as it contains the VM's domain XML file, which will show us all the devices we send libvirt, and all the addresses that the engine expects to get from it. > > > Any idea? > > Thanks. > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

From: "Yair Zaslavsky" <yzaslavs(a)redhat.com&gt; To: users(a)ovirt.org Cc: "mohsen saeedi" <mohsen.saeedi(a)gmail.com&gt;, "Oved Ourfalli" <oourfali(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 7:16:12 PM Subject: Re: [Users] Ovirt - double use of PCI Address On 06/05/2012 06:46 PM, Oved Ourfalli wrote: > I think that the problem is related to snapshots. > I saw that when working with a VM pool, defining some pre-started > VMs, then when shutting down a VM then all the devices are created > again, which leads to these duplications. > Still need to investigate/debug it, on a clean environment, but > looks like it is the issue. > > Oved I would also like to add that maybe its worth to get the XML of the configuration of the snapshot. This information is stored as "text" under the vm_configuration column of "snapshots" table. You will always have an "active" snapshot - this is not the snapshot you're interested at, simply query the snapshots table according to the snapshot description, and you will have the OVF that describes the VM when the snapshot was created. I wonder if the OVF is correctly kept at the snapshot (just suggesting another point of investigation) Yair > > ----- Original Message ----- >> From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; >> To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; >> Cc: users(a)ovirt.org, "Igor Lvovsky" <ilvovsky(a)redhat.com&gt; >> Sent: Tuesday, June 5, 2012 6:34:18 PM >> Subject: Re: [Users] Ovirt - double use of PCI Address >> >> >> >> >> >> Ok. thanks. I'm trying to do all of the under my home server with >> Ovirt. I'll update you about any problem in this case. >> >> >> >> Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 >> 11:20:03 >> -0400 (EDT): >> >> ----- Original Message ----- >> >> From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved >> Ourfalli" >> <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Igor Lvovsky" >> <ilvovsky(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 6:10:30 PM >> Subject: Re: [Users] Ovirt - double use of PCI Address >> >> >> >> >> >> Hi Again >> >> I just defined new server on Ovirt admin portal. I think define >> monitor is for desktop virtualization. is it true? >> >> I switched more than two time between spice and vnc. do you think >> switching between vnc and spice is the reason for this problem? >> And >> did the problem occur? >> Trying to reproduce it now and I can't, although I seem to have >> some >> VMs with more than one monitor in the vm_device table, but all >> have >> this property set to 1. >> I'll update you in case I understand the reason. If you have a >> solid >> reproduction then please share it. >> >> Thank you, >> Oved >> >> I'm going to delete extra video card. but it's very interesting >> for >> me to know about reason of this problem. >> >> >> >> >> Thanks >> >> Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 >> 10:16:07 >> -0400 (EDT): >> >> ----- Original Message ----- >> >> From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved >> Ourfalli" >> <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Igor Lvovsky" >> <ilvovsky(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 5:06:55 PM >> Subject: Re: [Users] Ovirt - double use of PCI Address >> >> >> >> >> >> Thanks. But i didn't add 3 video card! why there is 3 video >> card?is >> it bug? Basically the number of devices should grow or shrink, >> according to the number of monitors you choose in the VM >> properties. >> If it has more then it is a bug. >> I'll take a look at it. >> >> can you please explain more about how can i fix this problem? i >> must >> go to the database and then i leave the address as is? i don't >> understand last your sentence. >> Thanks for you attention. Thinking of it, if you don't want 3 >> devices >> you can just delete two of the three video controllers in order to >> workaround the issue. >> In order to do that you'll have to do the following in the >> database: >> 1. Find the vm_id of your VM. You can do that by looking at the >> vm_static table. >> 2. Then, in the vm_device table, find the video devices. >> 3. Delete two of the three devices. >> >> Let me know if you need more help. >> >> Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 >> 10:01:00 >> -0400 (EDT): >> >> ----- Original Message ----- >> >> From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved >> Ourfalli" >> <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org Sent: Tuesday, June 5, 2012 >> 4:42:09 PM >> Subject: Re: [Users] Ovirt - double use of PCI Address >> >> >> >> /*Oved Ourfalli <ovedo(a)redhat.com&gt; */ wrote on Tue, 05 Jun 2012 >> 09:29:19 >> -0400 (EDT): >> >> ----- Original Message ----- >> >> From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: >> users(a)ovirt.org >> Sent: Tuesday, June 5, 2012 4:24:46 PM >> Subject: [Users] Ovirt - double use of PCI Address >> >> >> >> >> >> Hi >> >> I setup ovirt and some other things. I make a virtual machine >> (CentOS >> 6.2). installed and configured it. then power off it and make a >> snapshot and create clone image from it. >> >> when i trying to start new machine, i got this error: >> >> 2012-06-05 13:16:15.433+0000: 2375: error : >> qemuCollectPCIAddress:743 >> : XML error: Attempted double use of PCI Address '0:0:2.0' >> >> I remove the new machine and try to start old machine. i get the >> error again! and i'm enable to start old machine. Can you please >> attach the engine.log and vdsm.log files? Yes, I attached both of >> them. >> >> Are you working with the most updated upstream code? I'm working >> with >> build from git - >> faef6297b0d01203e88040b2707f9abfbd754d3f. more information is >> available >> here: http://www.dreyou.org/ovirt/ You can see the issue in >> vdsm.log >> file. You have 3 video cards, all on the same address. >> >> <video> >> <address domain="0x0000" function="0x0" slot="0x02" >> type="pci" >> bus="0x00"/> >> <model heads="1" type="qxl" vram="65536"/> >> </video> >> <video> >> <address domain="0x0000" function="0x0" slot="0x02" >> type="pci" >> bus="0x00"/> >> <model heads="1" type="qxl" vram="65536"/> >> </video> >> <video> >> <address domain="0x0000" function="0x0" slot="0x02" >> type="pci" >> bus="0x00"/> >> <model heads="1" type="qxl" vram="65536"/> >> </video> >> >> Looking at the vdsm code (in vdsm/libvirtvm.py), you can see why >> such >> a thing might happen (also look at the FIXME comment :-) ). >> >> # FIXME. We have an identification problem here. >> # Video card device has not unique identifier, except >> the >> alias >> # (but backend not aware to device's aliases). >> # So, for now we can only assign the address according >> to >> devices order. >> for vc in self._devices[vm.VIDEO_DEVICES]: >> if not hasattr(vc, 'address') or not hasattr(vc, >> 'alias'): >> vc.alias = alias >> vc.address = address >> break >> # Update vm's conf with address >> for dev in self.conf['devices']: >> if (dev['type'] == vm.VIDEO_DEVICES) and \ >> (not dev.get('address') or not >> dev.get('alias')): >> dev['address'] = address >> dev['alias'] = alias >> break >> >> The code above is responsible to return the engine core the device >> addresses, after libvirt executes the VM, so that they will be >> persistent, and used in future executions of the VM. >> >> Now, the engine core is aware of the alias (as of the exact commit >> you used :-) ), but the first time you run the VM, you can get the >> addresses wrong, as the alias isn't taken into account. >> >> Would you like to try to fix this issue? The fix will be to make a >> better logic in the code above. Similar examples can be found in >> this file, for example in the section that does the same for >> controllers. >> >> If not, let me know and I'll go ahead and fix that. >> >> In the meantime, you can workaround this issue by going to the >> vm_device table, identifying these three devices, leave the >> address >> as is for the first video card of your VM (you probably have >> video0/1/2 as aliases), and try to run the VM again. >> Now, the engine will pass the one with the correct address as the >> first, and libvirt will allocate the right addresses to the other >> two. >> Hopefully this will be enough. >> >> Oved >> >> >> >> We had an issue with the monitors, in which the order of the >> monitor devices is important, as the first one needs to get the >> address 0:0:2.0, but that issue was fixed. >> Are you using more than one monitor? No, I'm using spice or vnc >> just >> for getting graphic. >> >> The vdsm.log fill will help a lot here, as it contains the VM's >> domain XML file, which will show us all the devices we send >> libvirt, and all the addresses that the engine expects to get from >> it. >> >> Any idea? >> >> Thanks. >> >> >> _______________________________________________ >> Users mailing list Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> _______________________________________________ >> Users mailing list Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> _______________________________________________ >> Users mailing list Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> _______________________________________________ >> Users mailing list Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users

From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org, "Yair Zaslavsky" <yzaslavs(a)redhat.com&gt; Sent: Wednesday, June 6, 2012 11:24:14 AM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. we should help each other in open source product. I'm trying to work with Ovirt everyday and if i find new problem or bug, i'll send it to lists. I didn't define any pool. as default pool is exist?

i make snapshot from my VM and then create new clone based on snapshot. then i try to start new vm. it failed with double of pci address.then i removed new clone VM. then i try to start old VM (that i created snapshot from it) . but i saw it failed too! then i sent email to this lists and you helped me to solve this problem. thanks. Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Wed, 06 Jun 2012 03:20:16 -0400 (EDT): Fix is now merged upstream: http://gerrit.ovirt.org/gitweb?p=ovirt-engine.git;a=commit;h=242636a161a1... I verified it on my environment, testing both snapshots and pools. I guess that old VMs you have, that are part of a pool, or were restored from snapshots, can be damaged (as not only the monitors were duplicated, but all the other devices as well, besides disks). Thank you for helping us find the problem, Oved ----- Original Message ----- From: "Yair Zaslavsky" <yzaslavs(a)redhat.com&gt; To: users(a)ovirt.org Cc: "mohsen saeedi" <mohsen.saeedi(a)gmail.com&gt; , "Oved Ourfalli" <oourfali(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 7:16:12 PM Subject: Re: [Users] Ovirt - double use of PCI Address On 06/05/2012 06:46 PM, Oved Ourfalli wrote: I think that the problem is related to snapshots. I saw that when working with a VM pool, defining some pre-started VMs, then when shutting down a VM then all the devices are created again, which leads to these duplications. Still need to investigate/debug it, on a clean environment, but looks like it is the issue. Oved I would also like to add that maybe its worth to get the XML of the configuration of the snapshot. This information is stored as "text" under the vm_configuration column of "snapshots" table. You will always have an "active" snapshot - this is not the snapshot you're interested at, simply query the snapshots table according to the snapshot description, and you will have the OVF that describes the VM when the snapshot was created. I wonder if the OVF is correctly kept at the snapshot (just suggesting another point of investigation) Yair ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Igor Lvovsky" <ilvovsky(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 6:34:18 PM Subject: Re: [Users] Ovirt - double use of PCI Address Ok. thanks. I'm trying to do all of the under my home server with Ovirt. I'll update you about any problem in this case. Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 11:20:03 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Igor Lvovsky" <ilvovsky(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 6:10:30 PM Subject: Re: [Users] Ovirt - double use of PCI Address Hi Again I just defined new server on Ovirt admin portal. I think define monitor is for desktop virtualization. is it true? I switched more than two time between spice and vnc. do you think switching between vnc and spice is the reason for this problem? And did the problem occur? Trying to reproduce it now and I can't, although I seem to have some VMs with more than one monitor in the vm_device table, but all have this property set to 1. I'll update you in case I understand the reason. If you have a solid reproduction then please share it. Thank you, Oved I'm going to delete extra video card. but it's very interesting for me to know about reason of this problem. Thanks Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 10:16:07 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Igor Lvovsky" <ilvovsky(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 5:06:55 PM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. But i didn't add 3 video card! why there is 3 video card?is it bug? Basically the number of devices should grow or shrink, according to the number of monitors you choose in the VM properties. If it has more then it is a bug. I'll take a look at it. can you please explain more about how can i fix this problem? i must go to the database and then i leave the address as is? i don't understand last your sentence. Thanks for you attention. Thinking of it, if you don't want 3 devices you can just delete two of the three video controllers in order to workaround the issue. In order to do that you'll have to do the following in the database: 1. Find the vm_id of your VM. You can do that by looking at the vm_static table. 2. Then, in the vm_device table, find the video devices. 3. Delete two of the three devices. Let me know if you need more help. Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 10:01:00 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org Sent: Tuesday, June 5, 2012 4:42:09 PM Subject: Re: [Users] Ovirt - double use of PCI Address /*Oved Ourfalli <ovedo(a)redhat.com&gt; */ wrote on Tue, 05 Jun 2012 09:29:19 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: users(a)ovirt.org Sent: Tuesday, June 5, 2012 4:24:46 PM Subject: [Users] Ovirt - double use of PCI Address Hi I setup ovirt and some other things. I make a virtual machine (CentOS 6.2). installed and configured it. then power off it and make a snapshot and create clone image from it. when i trying to start new machine, i got this error: 2012-06-05 13:16:15.433+0000: 2375: error : qemuCollectPCIAddress:743 : XML error: Attempted double use of PCI Address '0:0:2.0' I remove the new machine and try to start old machine. i get the error again! and i'm enable to start old machine. Can you please attach the engine.log and vdsm.log files? Yes, I attached both of them. Are you working with the most updated upstream code? I'm working with build from git - faef6297b0d01203e88040b2707f9abfbd754d3f. more information is available here: http://www.dreyou.org/ovirt/ You can see the issue in vdsm.log file. You have 3 video cards, all on the same address. <video> <address domain="0x0000" function="0x0" slot="0x02" type="pci" bus="0x00"/> <model heads="1" type="qxl" vram="65536"/> </video> <video> <address domain="0x0000" function="0x0" slot="0x02" type="pci" bus="0x00"/> <model heads="1" type="qxl" vram="65536"/> </video> <video> <address domain="0x0000" function="0x0" slot="0x02" type="pci" bus="0x00"/> <model heads="1" type="qxl" vram="65536"/> </video> Looking at the vdsm code (in vdsm/libvirtvm.py), you can see why such a thing might happen (also look at the FIXME comment :-) ). # FIXME. We have an identification problem here. # Video card device has not unique identifier, except the alias # (but backend not aware to device's aliases). # So, for now we can only assign the address according to devices order. for vc in self._devices[vm.VIDEO_DEVICES]: if not hasattr(vc, 'address') or not hasattr(vc, 'alias'): vc.alias = alias vc.address = address break # Update vm's conf with address for dev in self.conf['devices']: if (dev['type'] == vm.VIDEO_DEVICES) and \ (not dev.get('address') or not dev.get('alias')): dev['address'] = address dev['alias'] = alias break The code above is responsible to return the engine core the device addresses, after libvirt executes the VM, so that they will be persistent, and used in future executions of the VM. Now, the engine core is aware of the alias (as of the exact commit you used :-) ), but the first time you run the VM, you can get the addresses wrong, as the alias isn't taken into account. Would you like to try to fix this issue? The fix will be to make a better logic in the code above. Similar examples can be found in this file, for example in the section that does the same for controllers. If not, let me know and I'll go ahead and fix that. In the meantime, you can workaround this issue by going to the vm_device table, identifying these three devices, leave the address as is for the first video card of your VM (you probably have video0/1/2 as aliases), and try to run the VM again. Now, the engine will pass the one with the correct address as the first, and libvirt will allocate the right addresses to the other two. Hopefully this will be enough. Oved We had an issue with the monitors, in which the order of the monitor devices is important, as the first one needs to get the address 0:0:2.0, but that issue was fixed. Are you using more than one monitor? No, I'm using spice or vnc just for getting graphic. The vdsm.log fill will help a lot here, as it contains the VM's domain XML file, which will show us all the devices we send libvirt, and all the addresses that the engine expects to get from it. Any idea? Thanks. _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org Sent: Wednesday, June 6, 2012 2:31:59 PM Subject: Re: [Users] Ovirt - double use of PCI Address Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Wed, 06 Jun 2012 05:03:28 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Yair Zaslavsky" <yzaslavs(a)redhat.com&gt; Sent: Wednesday, June 6, 2012 11:24:14 AM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. we should help each other in open source product. I'm trying to work with Ovirt everyday and if i find new problem or bug, i'll send it to lists. I didn't define any pool. as default pool is exist? No. But pool uses snapshots for stateless VMs, and that's where I originally reproduced the problem. oh. yes. I saw stateless but what is the meaning of stateless VMs? I'm sorry to ask a lot of question! Thanks i make snapshot from my VM and then create new clone based on snapshot. then i try to start new vm. it failed with double of pci address.then i removed new clone VM. then i try to start old VM (that i created snapshot from it) . but i saw it failed too! then i sent email to this lists and you helped me to solve this problem. thanks. Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Wed, 06 Jun 2012 03:20:16 -0400 (EDT): Fix is now merged upstream: http://gerrit.ovirt.org/gitweb?p=ovirt-engine.git;a=commit;h=242636a161a1... I verified it on my environment, testing both snapshots and pools. I guess that old VMs you have, that are part of a pool, or were restored from snapshots, can be damaged (as not only the monitors were duplicated, but all the other devices as well, besides disks). Thank you for helping us find the problem, Oved ----- Original Message ----- From: "Yair Zaslavsky" <yzaslavs(a)redhat.com&gt; To: users(a)ovirt.org Cc: "mohsen saeedi" <mohsen.saeedi(a)gmail.com&gt; , "Oved Ourfalli" <oourfali(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 7:16:12 PM Subject: Re: [Users] Ovirt - double use of PCI Address On 06/05/2012 06:46 PM, Oved Ourfalli wrote: I think that the problem is related to snapshots. I saw that when working with a VM pool, defining some pre-started VMs, then when shutting down a VM then all the devices are created again, which leads to these duplications. Still need to investigate/debug it, on a clean environment, but looks like it is the issue. Oved I would also like to add that maybe its worth to get the XML of the configuration of the snapshot. This information is stored as "text" under the vm_configuration column of "snapshots" table. You will always have an "active" snapshot - this is not the snapshot you're interested at, simply query the snapshots table according to the snapshot description, and you will have the OVF that describes the VM when the snapshot was created. I wonder if the OVF is correctly kept at the snapshot (just suggesting another point of investigation) Yair ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Igor Lvovsky" <ilvovsky(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 6:34:18 PM Subject: Re: [Users] Ovirt - double use of PCI Address Ok. thanks. I'm trying to do all of the under my home server with Ovirt. I'll update you about any problem in this case. Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 11:20:03 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Igor Lvovsky" <ilvovsky(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 6:10:30 PM Subject: Re: [Users] Ovirt - double use of PCI Address Hi Again I just defined new server on Ovirt admin portal. I think define monitor is for desktop virtualization. is it true? I switched more than two time between spice and vnc. do you think switching between vnc and spice is the reason for this problem? And did the problem occur? Trying to reproduce it now and I can't, although I seem to have some VMs with more than one monitor in the vm_device table, but all have this property set to 1. I'll update you in case I understand the reason. If you have a solid reproduction then please share it. Thank you, Oved I'm going to delete extra video card. but it's very interesting for me to know about reason of this problem. Thanks Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 10:16:07 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org , "Igor Lvovsky" <ilvovsky(a)redhat.com&gt; Sent: Tuesday, June 5, 2012 5:06:55 PM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. But i didn't add 3 video card! why there is 3 video card?is it bug? Basically the number of devices should grow or shrink, according to the number of monitors you choose in the VM properties. If it has more then it is a bug. I'll take a look at it. can you please explain more about how can i fix this problem? i must go to the database and then i leave the address as is? i don't understand last your sentence. Thanks for you attention. Thinking of it, if you don't want 3 devices you can just delete two of the three video controllers in order to workaround the issue. In order to do that you'll have to do the following in the database: 1. Find the vm_id of your VM. You can do that by looking at the vm_static table. 2. Then, in the vm_device table, find the video devices. 3. Delete two of the three devices. Let me know if you need more help. Oved Ourfalli <ovedo(a)redhat.com&gt; wrote on Tue, 05 Jun 2012 10:01:00 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: "Oved Ourfalli" <ovedo(a)redhat.com&gt; Cc: users(a)ovirt.org Sent: Tuesday, June 5, 2012 4:42:09 PM Subject: Re: [Users] Ovirt - double use of PCI Address /*Oved Ourfalli <ovedo(a)redhat.com&gt; */ wrote on Tue, 05 Jun 2012 09:29:19 -0400 (EDT): ----- Original Message ----- From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com&gt; To: users(a)ovirt.org Sent: Tuesday, June 5, 2012 4:24:46 PM Subject: [Users] Ovirt - double use of PCI Address Hi I setup ovirt and some other things. I make a virtual machine (CentOS 6.2). installed and configured it. then power off it and make a snapshot and create clone image from it. when i trying to start new machine, i got this error: 2012-06-05 13:16:15.433+0000: 2375: error : qemuCollectPCIAddress:743 : XML error: Attempted double use of PCI Address '0:0:2.0' I remove the new machine and try to start old machine. i get the error again! and i'm enable to start old machine. Can you please attach the engine.log and vdsm.log files? Yes, I attached both of them. Are you working with the most updated upstream code? I'm working with build from git - faef6297b0d01203e88040b2707f9abfbd754d3f. more information is available here: http://www.dreyou.org/ovirt/ You can see the issue in vdsm.log file. You have 3 video cards, all on the same address. <video> <address domain="0x0000" function="0x0" slot="0x02" type="pci" bus="0x00"/> <model heads="1" type="qxl" vram="65536"/> </video> <video> <address domain="0x0000" function="0x0" slot="0x02" type="pci" bus="0x00"/> <model heads="1" type="qxl" vram="65536"/> </video> <video> <address domain="0x0000" function="0x0" slot="0x02" type="pci" bus="0x00"/> <model heads="1" type="qxl" vram="65536"/> </video> Looking at the vdsm code (in vdsm/libvirtvm.py), you can see why such a thing might happen (also look at the FIXME comment :-) ). # FIXME. We have an identification problem here. # Video card device has not unique identifier, except the alias # (but backend not aware to device's aliases). # So, for now we can only assign the address according to devices order. for vc in self._devices[vm.VIDEO_DEVICES]: if not hasattr(vc, 'address') or not hasattr(vc, 'alias'): vc.alias = alias vc.address = address break # Update vm's conf with address for dev in self.conf['devices']: if (dev['type'] == vm.VIDEO_DEVICES) and \ (not dev.get('address') or not dev.get('alias')): dev['address'] = address dev['alias'] = alias break The code above is responsible to return the engine core the device addresses, after libvirt executes the VM, so that they will be persistent, and used in future executions of the VM. Now, the engine core is aware of the alias (as of the exact commit you used :-) ), but the first time you run the VM, you can get the addresses wrong, as the alias isn't taken into account. Would you like to try to fix this issue? The fix will be to make a better logic in the code above. Similar examples can be found in this file, for example in the section that does the same for controllers. If not, let me know and I'll go ahead and fix that. In the meantime, you can workaround this issue by going to the vm_device table, identifying these three devices, leave the address as is for the first video card of your VM (you probably have video0/1/2 as aliases), and try to run the VM again. Now, the engine will pass the one with the correct address as the first, and libvirt will allocate the right addresses to the other two. Hopefully this will be enough. Oved We had an issue with the monitors, in which the order of the monitor devices is important, as the first one needs to get the address 0:0:2.0, but that issue was fixed. Are you using more than one monitor? No, I'm using spice or vnc just for getting graphic. The vdsm.log fill will help a lot here, as it contains the VM's domain XML file, which will show us all the devices we send libvirt, and all the addresses that the engine expects to get from it. Any idea? Thanks. _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users