6:37 a.m.
Hi,
I would like to know if the following scenario is supported in ovirt
(currently testing 3.3.2).
You have a vm with an attached disk.
You want to start this vm with an attached iso image via cd-rom
you want to pass to this started system cloud-init metadata via
"run once" or REST.
I know that ovirt passes the metadata by creating an ISO and
attaching this ISO to the VM as an CD-ROM itself.
My tests so far included the following:
1. shut down the vm
2. click run once
3. switch boot order to boot from cd-rom, attach an ISO
4. activate cloud-init metadata and pass some data over it
actual result: the system boots from hard disk, not from
the attached iso.
Second test:
1. shut down the vm
2. edit the vm, change boot order to boot from cd-rom, attach iso
2. click run once
4. activate cloud-init metadata and pass some data over it
actual result: the system boots from hard disk, not from
the attached iso.
Is this not possible or am I doing it wrong?
Any hints would be appreciated!
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
8:37 a.m.
Has nobody any clue regarding this?
I also asked via IRC. I'm still testing
and trying to get this working.
Am 12.02.2014 13:37, schrieb Sven Kieske:
Hi,
I would like to know if the following scenario is supported in ovirt
(currently testing 3.3.2).
You have a vm with an attached disk.
You want to start this vm with an attached iso image via cd-rom
you want to pass to this started system cloud-init metadata via
"run once" or REST.
I know that ovirt passes the metadata by creating an ISO and
attaching this ISO to the VM as an CD-ROM itself.
My tests so far included the following:
1. shut down the vm
2. click run once
3. switch boot order to boot from cd-rom, attach an ISO
4. activate cloud-init metadata and pass some data over it
actual result: the system boots from hard disk, not from
the attached iso.
Second test:
1. shut down the vm
2. edit the vm, change boot order to boot from cd-rom, attach iso
2. click run once
4. activate cloud-init metadata and pass some data over it
actual result: the system boots from hard disk, not from
the attached iso.
Is this not possible or am I doing it wrong?
Any hints would be appreciated!
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
8:56 a.m.
Okay, I think I found a bug:
if you attach a cd-rom via run once and make it
the primary boot device
and you submit in the same step cloud-init data
the xml file generated by ovirt looks like the following:
both virtual cd roms get attached and show up in the xml
the expected primary boot device shows up as:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hdc' bus='ide'/>
with no entity (which it should have):
<boot order='1'/>
the cloud-init data shows up as the following:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source
file='/var/run/vdsm/payload/934aebfd-7a7b-4c47-91be-97d58fb32b1e.34f0c17686175ad722c3b0a03f3db4d3.img'
startupPolicy='optional'/>
<target dev='hdd' bus='ide'/>
<readonly/>
<serial></serial>
<boot order='1'/>
the hdd gets "boot order='2'"
this results in a wrong boot order:
the vm trys to start from the cloud-init cd rom and fails
and then boots the hdd.
I will file a BZ for this.
Tested with the following versions:
rpm -qa vdsm
vdsm-4.12.1-4.el6.x86_64
rpm -qa ovirt-engine
ovirt-engine-3.3.2-1.el6.noarch
Am 12.02.2014 13:37, schrieb Sven Kieske:
Hi,
I would like to know if the following scenario is supported in ovirt
(currently testing 3.3.2).
You have a vm with an attached disk.
You want to start this vm with an attached iso image via cd-rom
you want to pass to this started system cloud-init metadata via
"run once" or REST.
I know that ovirt passes the metadata by creating an ISO and
attaching this ISO to the VM as an CD-ROM itself.
My tests so far included the following:
1. shut down the vm
2. click run once
3. switch boot order to boot from cd-rom, attach an ISO
4. activate cloud-init metadata and pass some data over it
actual result: the system boots from hard disk, not from
the attached iso.
Second test:
1. shut down the vm
2. edit the vm, change boot order to boot from cd-rom, attach iso
2. click run once
4. activate cloud-init metadata and pass some data over it
actual result: the system boots from hard disk, not from
the attached iso.
Is this not possible or am I doing it wrong?
Any hints would be appreciated!
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
9:03 a.m.
Here is the BZ, I also found 2 maybe related BZs which are already
closed:
https://bugzilla.redhat.com/show_bug.cgi?id=1064927
Am 12.02.2014 13:37, schrieb Sven Kieske:
Hi,
I would like to know if the following scenario is supported in ovirt
(currently testing 3.3.2).
You have a vm with an attached disk.
You want to start this vm with an attached iso image via cd-rom
you want to pass to this started system cloud-init metadata via
"run once" or REST.
I know that ovirt passes the metadata by creating an ISO and
attaching this ISO to the VM as an CD-ROM itself.
My tests so far included the following:
1. shut down the vm
2. click run once
3. switch boot order to boot from cd-rom, attach an ISO
4. activate cloud-init metadata and pass some data over it
actual result: the system boots from hard disk, not from
the attached iso.
Second test:
1. shut down the vm
2. edit the vm, change boot order to boot from cd-rom, attach iso
2. click run once
4. activate cloud-init metadata and pass some data over it
actual result: the system boots from hard disk, not from
the attached iso.
Is this not possible or am I doing it wrong?
Any hints would be appreciated!
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
3748
days inactive
3749
days old
3 comments
1 participants
participants (1)
-
Sven Kieske