5:36 p.m.
Hi,
is it possible to increase the memory of an hosted engine after the
installation?
cheers
gregor
3:25 a.m.
Hi,
In order to increase the memory allocation or the cpu cores of the hosted
engine VM, the VM must be brought down and the vm.conf configuration file
must be edited on every hypervisor:
Set global maintenance mode from the hypervisor the VM is currently running
on:
# hosted-engine --set-maintenance --mode=global
Cleanly shutdown the engine VM:
# hosted-engine --vm-shutdown
Makes sure the VM is Down and not 'Powering Off' before proceeding:
# hosted-engine --vm-status
Edit /etc/ovirt-hosted-engine/vm.conf on *each* hypervisor, and change
these lines to whatever amount of RAM in MB / CPU cores you wish the
VM to have:
memSize=4096
smp=1 *smp = number of virtual cores*
Start the VM again:# hosted-engine --vm-start
And take it out of maintenance mode:
# hosted-engine --set-maintenance --mode=none
Regards,
Yanir Quinn
On Sat, Jul 29, 2017 at 1:36 AM, gregor <gregor_forum(a)catrix.at> wrote:
Hi,
is it possible to increase the memory of an hosted engine after the
installation?
cheers
gregor
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
5:14 a.m.
I believe it depends on the version of Ovirt that you use, the Yanir
solution can be relevant only for the 3.5 version. Started from version 3.6
you can edit HE VM memory via UI without any troubles, the only thing that
you must be aware of under 4.1 you will need to wait for some time, until
the engine update HE VM OVF file(in 4.2 you do not need to wait).
1. Enable global maintenance
2. To reduce wait time you can change # engine-config
OvfUpdateIntervalInMinutes=1 && systemctl restart ovirt-engine
3. Change HE VM memory via UI and wait for 1-2 minutes
4. Change OvfUpdateIntervalInMinutes parameter to default value
5. Restart HE VM # hosted-engine --vm-poweroff && hosted-engine
--vm-start
6. Disable global maintenance
In 4.2 you do not need to apply steps 2-4
Best Regards
On Sun, Jul 30, 2017 at 11:25 AM, Yanir Quinn <yquinn(a)redhat.com> wrote:
Hi,
In order to increase the memory allocation or the cpu cores of the hosted
engine VM, the VM must be brought down and the vm.conf configuration file
must be edited on every hypervisor:
Set global maintenance mode from the hypervisor the VM is currently
running on:
# hosted-engine --set-maintenance --mode=global
Cleanly shutdown the engine VM:
# hosted-engine --vm-shutdown
Makes sure the VM is Down and not 'Powering Off' before proceeding:
# hosted-engine --vm-status
Edit /etc/ovirt-hosted-engine/vm.conf on *each* hypervisor, and change these lines to
whatever amount of RAM in MB / CPU cores you wish the VM to have:
memSize=4096
smp=1 *smp = number of virtual cores*
Start the VM again:# hosted-engine --vm-start
And take it out of maintenance mode:
# hosted-engine --set-maintenance --mode=none
Regards,
Yanir Quinn
On Sat, Jul 29, 2017 at 1:36 AM, gregor <gregor_forum(a)catrix.at> wrote:
> Hi,
>
> is it possible to increase the memory of an hosted engine after the
> installation?
>
> cheers
> gregor
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2485
days inactive
2487
days old
2 comments
3 participants
participants (3)
-
Artyom Lukianov -
gregor -
Yanir Quinn