Re: [Kimchi-devel] RFC: Add serial as a valid graphics type

on 2014/10/14 21:45, Aline Manera wrote: > On 10/14/2014 07:04 AM, Yu Xin Huo wrote: >> https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/... >> >> >> Per my understanding: >> >> 1. To enable the serial console, it needs configuration on guest OS. >> >> / You must configure the virtualized operating system to output >> information to the virtual serial port.// >> // The serial port is called //|ttyS0|//on Linux or >> //|COM1|//on Windows./ >> >> It need to modify the |/boot/grub/grub.conf| file on guest OS and >> reboot guest. >> >> So VM must have OS already installed, seems like it needs the >> guest to be running. > Prior to do that guest OS configuration, the guest must have the serial > console set on its XML. > > <serial type='pty'> > <target port='0'/> > </serial> > <console type='pty'> > <target type='serial' port='0'/> > </console> > I found that Fedora can scan and use ttyS0 as terminal automatically, so save the user from manually editing grub config. This is not often used, but it's handy when troubleshooting, or when the network is too slow to support an VNC/Spice session. > So the idea is providing a way to user to choose between spice, vnc or > serial and Kimchi will setup the guest XML accordingly. > However I don't think spice/vnc and serial are exclusive options. Spice and VNC are alternative to each other but serial should be a complement, mainly for troubleshooting. If a newly created guest doesn't have spice/vnc, and only contains serial port, it may not be able to install OS successfully, because not all Linux installation programme support serial console mode. Since the user has to modify kernel argument before using a serial port, if without vnc/spice, how can user edit the kernel argument. It's true the real servers does not have display and keyboard, but the admin can use KVM (Keyboard Video Mouse facilities) to connect to the server video display, or use something like IMM on IBM X servers. I notice that by default, guest created by virt-manager contains a serial port. I think we can follow the same idea. We could always provide vnc/spice and serial port. vnc/spice is for main use, serial port is for troubleshooting. > For reference: > - > http://rwmj.wordpress.com/2011/07/08/setting-up-a-serial-console-in-qemu-... > > - http://libvirt.org/formatdomain.html#elementsConsole > >> 2. The serial console can be accessed with 'virsh console' or 'use >> |virt-manager| to display the virtual text console'. >> >> So the target of this work item is to add a 'web command line >> console' in kimchi UI to access the 'serial console'? >> >> |||| > We could try to find an AJAX text console to enable serial console view > direct on Kimchi (the same virt-manager does) > So if the guest is configured with serial console and user clicks on > "Connect" we open the text console in a new tab. > But unless we find this AJAX text console done in an open source > project, I don't expect to have it for 1.4 release. > I found that in websockify source code, there is a wspty. It is a terminal implemented in HTML and js. I was once in oVirt community, at that time I was able to build a serial console solution using this wspty. However I found that there some bugs, some keys are not interpreted correctly. Maybe we can have a look at this wspty? If it's good we can submit bug fixes to websockify. The console solution once I implemented was like this. guest serial port -> qemu char devices -> host pty Then I made a proxy to open this pty and forward the data to an HTTP long connecion. host pty -> proxy ---(HTTP)--> wspty wspty is using websocket, I changed it a little bit to use raw HTTP instead. For this part, I have a prototype repository on github, maybe you can have a look. There are instructions on how to setup a guest and using a proxy and wspty to access it's serial port. https://github.com/edwardbadboy/ptyforward/blob/master/README If we are to use websocket, the nature solution would be as follow host pty -> websockify ---(websocket)--> wspty There is a potential security risk. If we use websockify to transfer serial port data, we are exposing the serial port to public without any authentication. We have the same problem in VNC/Spice, that's why we add ticket. The VNC ticket is using the password mechanism built in the VNC protocol. However when using serial port, there is no such protocol, it just transfers raw data. A solution is that we use the websocket facility supported by cherrypy and forward the serial port data ourselves, so that we can do authentication as usual.