Hi,
Regarding the UI we currently have these two widgets:
-wok.confirm that displays a title, a message and an "Ok" and "Cancel"
buttons;
-wok.window that displays a modal window and we have full control of the HTML inside of
it.
Does this feature really requires that we create a new JS widget? I think we can use
wok.window and bootstrap default modal elements and then wok.confirm to trigger the
"Disclaimer" message, like the attached screenshot.
I thought that since this process could take a long time to finish, we should have a
progress bar or something but I think a better place to display this should be Guests page
instead of the modal window unless we have some sort of "block-UI" while the
migration is still in progress.
If we do have to create a new widget, then I think we can use a Wizard. I'm attaching
4 samples of it.
Regards,
Samuel
-----Original Message-----
From: kimchi-devel-bounces(a)ovirt.org [mailto:kimchi-devel-bounces@ovirt.org] On Behalf Of
Daniel Henrique Barboza
Sent: segunda-feira, 16 de novembro de 2015 10:43
To: kimchi-devel(a)ovirt.org
Subject: Re: [Kimchi-devel] [RFC] UI - Live migration UI design
On 11/13/2015 12:23 PM, Walter Niklaus wrote:
On 13.11.2015 14:09, Daniel Henrique Barboza wrote:
> Hi,
>
> The backend for this feature is almost completed and the API is
> defined, so let's talk about the UI.
>
> This is the API (note: the upstream version is outdated, will be
> updated in an incoming patch):
>
> **URI:** /plugins/kimchi/vms/*:name*
>
> * **POST**: *See Virtual Machine Actions*
>
> **Actions (POST):**
>
> * migrate: Migrate a virtual machine to a remote server, only support
> live mode without block migration.
> * remote_host: IP address or hostname of the remote server.
> * user *(optional)*: User to log on at the remote server.
> * password *(optional)*: password of the user in the remote
> server
>
>
> This API will return a task ID for the UI to track its progress,
> pretty much like it is done with the 'clone' feature.
>
> This is how I imagine the UI:
>
> - a button called "migrate" at the same submenu as clone VM.
>
> - when pressed, a new window appears with the following content:
>
> --------
> "Disclaimer: this process cannot be stopped after started, can take a
> long time to complete and will turn off this current VM when it is
> over."
I would propose to change the wording: will turn off this current VM
when it is over. into something like: will turn off the VM on
this Hypervisor when it is sucessfully migrated to the remote
destination.
Fine by me!
Sorry, but I don't remember if we allow static migration as well
? If
we do, then we may have to display a different text for the static
migration.
The static migration (non shared storage migration) are waiting review in the ML.
It'll be upstream soon.
The post-migration behavior is the same from the shared storage migration, so I don't
believe we'll need two different texts in this scenario.
>
> * textfield to input the remote_server, name "remote server"
>
> * checkbox with text: "Delete this VM when the migration is completed"
>
Typically the VM definition, and I guess this is what the checkbox is
reffering to, is migrated to the remote host as well in order to allow
full management of this VM on the remote host (like changing its
configuration). I'm aware that we are not doing such actions in this
first release.
Actually we are. If the VM is persistent (= has a configuration file
inside libvirt) it will have a configuration file in the destination host and it will, or
it should be, fully manageable on the remote host as if it was a VM created there.
However migrating the VM definition has a sideeffect we may want to
consider in this scope: it makes sure that you can not have multiple
instances of the VM running on different hosts. This aspect is
releveant only if starting the VM multiple times is causing a conflict
on a resource like: the same SCSI disk as boot device.
I'm wondering that if the user doesn't select the above checkbox we
should put out a warning like: "Restarting the VM locally may cause
resource conflicts with the migrated instance"
Hmmmm that's a fair point.
I believe we can add this warning text as well.
>
> Text: "The following fields are optional. Fill them if you want
> Kimchi to setup a password-less ssh session between the localhost and
> the remote host. The setup process will only be successful if the
> user has 'SUDO ALL' permission in the remote machine"
>
> * textfield to input the username of the remote host
> * password field to input the password of the user in the remote host
>
> * "Cancel" and "Start" buttons at the bottom
>
> -------------
>
>
> This is the workflow/behavior I would expect of it:
>
> - clicking "Cancel" at any time will dismiss the window and nothing
> happens;
>
> - clicking "Start" without remote_host field will issue an error
> "remote host field cannot be blank" or something like that
>
> - clicking "Start" with a remote host field will start the process
>
> - clicking "Start" with remote host and only one of the user or
> password filled will raise an error "both user and password fields
> must be filled".
>
> - if, **and only if **, the user checks the checkbox "Delete VM
> ....", the UI will delete the VM after the migration process is
> completed by using the proper API (I believe it is DELETE /vms/name).
>
>
> This is all I have for the UI for this feature ATM. I'll update this
> RFC if required.
>
>
> Please provide comments and suggestions. The final backend for this
> feature will be submitted to the ML at the start of the next week.
>
>
> Let me know if there's any doubts about how Kimchi's live migration
> backend
> works.
>
>
>
> Daniel
>
> _______________________________________________
> Kimchi-devel mailing list
> Kimchi-devel(a)ovirt.org
>
http://lists.ovirt.org/mailman/listinfo/kimchi-devel
>
_______________________________________________
Kimchi-devel mailing list
Kimchi-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/kimchi-devel
_______________________________________________
Kimchi-devel mailing list
Kimchi-devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/kimchi-devel