10:22 a.m.
Added information for software updates, adding storage device, and replacing contents of
CDROM. Plus a couple of clean up things.
Signed-off-by: Kersten Richter <kersten(a)us.ibm.com>
---
ui/pages/help/guests.dita | 83 ++++++++++++++++++++++++++++++------------
ui/pages/help/host.dita | 44 +++++++++++++----------
ui/pages/help/templates.dita | 18 +++++-----
3 files changed, 93 insertions(+), 52 deletions(-)
diff --git a/ui/pages/help/guests.dita b/ui/pages/help/guests.dita
index bae98bb..0456bbb 100644
--- a/ui/pages/help/guests.dita
+++ b/ui/pages/help/guests.dita
@@ -23,26 +23,28 @@ KVM virtual machines.</shortdesc>
<dd>Network input/output transmission rate in KB per seconds.</dd>
</dlentry><dlentry>
<dt>Disk I/O</dt>
-<dd> Disk input/output transmission rate in KB per seconds.</dd>
+<dd>Disk input/output transmission rate in KB per seconds.</dd>
</dlentry><dlentry>
<dt>Livetile</dt>
-<dd rev="rev1">State of guest operating system console, or an icon
-that represents the <tm tmtype="tm"
trademark="Linux">Linux</tm> distribution
-if the guest is not active.</dd>
+<dd>State of guest operating system console, or an icon that represents
+the <tm tmtype="tm" trademark="Linux">Linux</tm>
distribution if the
+guest is not active.</dd>
</dlentry></dl></p>
<p>The following actions icons are displayed for each guest:<dl>
<dlentry>
-<dt rev="rev1">Reset</dt>
-<dd rev="rev1">Click to reset the guest. </dd>
+<dt>Reset</dt>
+<dd>Click to reset the guest. </dd>
</dlentry><dlentry>
-<dt><tm tmclass="IGNORE" tmtype="reg"
trademark="Power">Power</tm> (Start
-or Stop)</dt>
+<dt>Power (Start or Stop)</dt>
<dd>Click to power on or power off the guest. If the icon is red,
the power is off; if the icon is green, the power is on.</dd>
</dlentry></dl> </p>
<p>The following actions can be selected for each guest:<ul>
-<li>Select <uicontrol>VNC</uicontrol> to connect to the remote console
-for the guest operating system.</li>
+<li>Select <uicontrol>Connect</uicontrol> to connect to the remote
+console for the guest operating system.</li>
+<li>Select <uicontrol>Manage media</uicontrol> to change the path
+to the installation media.</li>
+<li>Select <uicontrol>Reset</uicontrol> to reset the guest.</li>
<li>Select <uicontrol>Edit</uicontrol> to edit the properties of an
existing guest. Guests can be edited only while stopped.</li>
<li>Select <uicontrol>Delete</uicontrol> to delete the
guest.</li>
@@ -66,16 +68,12 @@ create a template.</li>
</cshelp>
<cshelp id="kimhvirtmedit" xml:lang="en-us">
<title>Edit guest</title>
-<shortdesc rev="rev1">Edit the properties of an existing virtual
machine.
-Guests can be edited only while stopped.</shortdesc>
-<csprolog><csmetadata>
-<cswindowtitle>Title of window or panel associated with this help;
-for review output only.</cswindowtitle>
-<cswidgetlabel>Name of field or control associated with this help;
-for review output only</cswidgetlabel>
-</csmetadata></csprolog>
+<shortdesc>Edit the properties of an existing virtual machine. Guests
+can be edited only while stopped.</shortdesc>
+<csprolog><csmetadata></csmetadata></csprolog>
<csbody>
-<p>For each guest, the following information is
displayed:<dl><dlentry>
+<p>For each guest, the following information is displayed on the
<wintitle>General</wintitle> tab:<dl>
+<dlentry>
<dt>Name</dt>
<dd>Name of the virtual machine.</dd>
</dlentry><dlentry>
@@ -86,14 +84,51 @@ for review output only</cswidgetlabel>
<dd>Amount of memory in MB.</dd>
</dlentry><dlentry>
<dt>Icon</dt>
-<dd rev="rev2"> Graphic image representing the Linux distribution
-to be displayed in place of current status (Livetile) when the guest
-is not active.</dd>
+<dd>Graphic image representing the Linux distribution to be displayed
+in place of current status (Livetile) when the guest is not active.</dd>
</dlentry></dl></p>
+<p>The following information is displayed on the
<wintitle>Storage</wintitle> tab.</p>
+<dl><dlentry>
+<dt>Storage</dt>
+<dd>Displays the location of the ISO file used for installation.</dd>
+</dlentry></dl><?Pub Caret -2?>
<p> Fields that are not disabled can be edited. After you edit a field,
click <uicontrol>Save</uicontrol>. </p>
</csbody>
-</cshelp><?Pub Caret -1?>
+</cshelp>
+<cshelp id="kimstoragedevice" xml:lang="en-us">
+<title>Add, replace, or detach a storage device</title>
+<shortdesc rev="rev1">You can add, replace, or detach a storage device
+to your virtual machine. The only supported device is CDROM. To edit
+your storage devices, follow these steps:</shortdesc>
+<csbody>
+<ol>
+<li>On the <wintitle>Edit Guest</wintitle> window, select
<wintitle>Storage</wintitle>.</li>
+<li>To replace a storage device, click the first icon with the
<uicontrol>orange
+slash (/)</uicontrol>. Enter the ISO file path and click
<uicontrol>Replace</uicontrol>.</li>
+<li>To detach a storage device, click the second icon with the
<uicontrol>red
+dash (-)</uicontrol>. Confirm the deletion and click
<uicontrol>OK</uicontrol>.</li>
+<li>To add a storage device, click the third icon with the green
<uicontrol>plus
+sign (+)</uicontrol>. Enter a device name and ISO file path and click
<uicontrol>Attach</uicontrol>.</li>
+</ol>
+</csbody>
+</cshelp>
+<cshelp id="kimreplacemedia" xml:lang="en-us">
+<title>Replace a CDROM of VM</title>
+<shortdesc rev="rev1">You can replace the contents of the CDROM for
+a virtual machine after the installation is complete.</shortdesc>
+<csbody>
+<ol>
+<li>Ensure that the virtual machine is started.</li>
+<li>From the Actions menu, select <uicontrol>Manage
Media</uicontrol>.</li>
+<li>To change what is currently loaded in the CDROM, click the
<uicontrol>orange
+slash (/)</uicontrol> icon next to the hdc field.</li>
+<li>On the <wintitle>Replace a CDROM of VM</wintitle> page, enter
+the ISO file path. The other two fields are read-only.</li>
+<li>Click <uicontrol>Replace</uicontrol>.</li>
+</ol>
+</csbody>
+</cshelp>
<?tm 1391540919 3?>
</cshelp>
-<?Pub *0000003805?>
+<?Pub *0000005541?>
diff --git a/ui/pages/help/host.dita b/ui/pages/help/host.dita
index d961edc..1b60b27 100644
--- a/ui/pages/help/host.dita
+++ b/ui/pages/help/host.dita
@@ -9,16 +9,16 @@ For support please see:
https://w3.opensource.ibm.com/projects/dita-cshelp/-->
<cshelp id="kimhhost" xml:lang="en-us">
<title>Host</title>
-<shortdesc rev="rev1">The <wintitle>Host</wintitle> page
shows information
-about the host system, and allows you to shut down, restart, and connect
+<shortdesc>The <wintitle>Host</wintitle> page shows information about
+the host system, and allows you to shut down, restart, and connect
to the host.</shortdesc>
<csbody>
<p>You can perform the following actions on the host:<ul>
<li>Select <uicontrol>Shut down</uicontrol> to shut down the host
system.</li>
<li>Select <uicontrol>Restart</uicontrol> to restart the host
system.</li>
-<li rev="rev1">Select <uicontrol>Connect</uicontrol> to open
a VNC
-connection to the host system, if it is not already connected.</li>
+<li>Select <uicontrol>Connect</uicontrol> to open a VNC connection
+to the host system, if it is not already connected.</li>
</ul></p>
<p>Click the following sections to display information about the host:<dl>
<dlentry>
@@ -28,24 +28,30 @@ version, and code name, as well as the processor type and amount of
memory in GB.</dd>
</dlentry><dlentry>
<dt>System statistics</dt>
-<dd rev="rev1">This section displays graphs to show statistics for
-CPU, memory, disk I/O, and network I/O for the host. Select <uicontrol>Collecting
+<dd>This section displays graphs to show statistics for CPU, memory,
+disk I/O, and network I/O for the host. Select <uicontrol>Collecting
data after leaving this page</uicontrol> to continue collecting data
when the host tab is out of view.</dd>
</dlentry><dlentry>
+<dt>Software Updates</dt>
+<dd>This section displays information for all of the packages that
+have updates available, including package name, version, architecture,
+and repository. You can update all of the packages listed by selecting
<uicontrol>Update
+All</uicontrol>. You cannot select individual packages for updates.</dd>
+</dlentry><dlentry>
<dt>Debug reports</dt>
-<dd rev="rev1">This section displays debug reports, including name
-and file path. You can select from options to generate a new report,
-or rename, remove, or download an existing report.<p>The debug report
-is generated using the <cmdname>sosreport</cmdname> command. It is
-available for Red Hat Enterprise <tm tmtype="tm"
trademark="Linux">Linux</tm>,
-Fedora, and Ubuntu distributions. The command generates a .tar file
-that contains configuration and diagnostic information, such as the
-running kernel version, loaded modules, and system and service configuration
-files. The command also runs external programs to collect further
-information and stores this output in the resulting archive.</p> </dd>
-</dlentry></dl></p>
-</csbody><?Pub Caret -2?>
+<dd>This section displays debug reports, including name and file path.
+You can select from options to generate a new report, or rename, remove,
+or download an existing report.<p>The debug report is generated using
+the <cmdname>sosreport</cmdname> command. It is available for Red
+Hat Enterprise <tm tmtype="tm"
trademark="Linux">Linux</tm>, Fedora,
+and Ubuntu distributions. The command generates a .tar file that contains
+configuration and diagnostic information, such as the running kernel
+version, loaded modules, and system and service configuration files.
+The command also runs external programs to collect further information
+and stores this output in the resulting archive.</p> </dd>
+</dlentry></dl><?Pub Caret 693?></p>
+</csbody>
<?tm 1392659967 1?>
</cshelp>
-<?Pub *0000002392?>
+<?Pub *0000002695?>
diff --git a/ui/pages/help/templates.dita b/ui/pages/help/templates.dita
index d0122ec..8306681 100644
--- a/ui/pages/help/templates.dita
+++ b/ui/pages/help/templates.dita
@@ -56,7 +56,7 @@ is configured to use.</dd>
<dd>Amount of memory in MB to be allocated to the virtual machine.</dd>
</dlentry><dlentry>
<dt>Disk</dt>
-<dd rev="rev1">Disk size in GB.</dd>
+<dd>Disk size in GB.</dd>
</dlentry><dlentry>
<dt>CDROM</dt>
<dd>File path to the location of the ISO file used to install the
@@ -66,10 +66,10 @@ KVM guest.</dd>
<dd>Specific storage pool or the default storage pool.</dd>
</dlentry><dlentry>
<dt>Network</dt>
-<dd rev="rev1">Default network interfaces available to the KVM guest.
-You can select multiple networks.</dd>
-</dlentry></dl><?Pub Caret 681?> Fields that are not disabled can
-be edited. After you edit a field, click <uicontrol>Save</uicontrol>.
</p>
+<dd>Default network interfaces available to the KVM guest. You can
+select multiple networks.</dd>
+</dlentry></dl> Fields that are not disabled can be edited. After
+you edit a field, click <uicontrol>Save</uicontrol>. </p>
</csbody>
</cshelp>
<cshelp id="kimhaddtempl">
@@ -108,15 +108,15 @@ Templates from Selected ISO</uicontrol>.</li>
<li>Select <uicontrol>All</uicontrol> to create a template from each
listed ISO image, then click <uicontrol>Create Templates from Selected
ISO</uicontrol>.</li>
-<li rev="rev1">If the ISO image that you want to use does not appear
-in the scan results, you can select from the following options:<ul>
+<li>If the ISO image that you want to use does not appear in the scan
+results, you can select from the following options:<ul>
<li>Select <uicontrol>I want to use a specific ISO file</uicontrol> to
specify a path to the ISO image.</li>
<li>Click <uicontrol>Search more ISOs</uicontrol> to search for more
ISO images.</li>
-</ul></li>
+</ul></li><?Pub Caret 0?>
</ul></p>
</csbody>
</cshelp>
</cshelp>
-<?Pub *0000004468?>
+<?Pub *0000004433?>
--
1.7.1