November 2019 - Infra - Ovirt List Archives

[CQ]: 104341,3 (imgbased) failed "ovirt-master" system tests

by oVirt Jenkins

Change 104341,3 (imgbased) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/104341/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16753/

5 years

1
0
0 / 0

[CQ]: 104423,2 (vdsm) failed "ovirt-master" system tests

by oVirt Jenkins

Change 104423,2 (vdsm) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/104423/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/16747/

5 years

1
0
0 / 0

[CQ]: 0efc48a (ovirt-ansible-vm-infra) failed "ovirt-4.3" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-4.3" change queue including change 0efc48a (ovirt-ansible-vm-infra) failed. However, this change seems not to be the root cause for this failure. Change 4e4aca6 (ovirt-ansible-vm-infra) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 4e4aca6 (ovirt-ansible-vm- infra) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-vm-infra/commit/0efc48aaccf1188ef0... For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-vm-infra/commit/4e4aca6f3c3b2f124d... For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/2410/

5 years

1
0
0 / 0

[CQ]: 40bd37e (ovirt-ansible-infra) failed "ovirt-4.3" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-4.3" change queue including change 40bd37e (ovirt-ansible-infra) failed. However, this change seems not to be the root cause for this failure. Change f8f885f (ovirt-ansible-infra) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change f8f885f (ovirt-ansible-infra) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-infra/commit/40bd37e5f16c09be61868... For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-infra/commit/f8f885f039a51d28b74e9... For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/2409/

5 years

1
0
0 / 0

[CQ]: f8f885f (ovirt-ansible-infra) failed "ovirt-4.3" system tests

by oVirt Jenkins

Change f8f885f (ovirt-ansible-infra) is probably the reason behind recent system test failures in the "ovirt-4.3" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://github.com/oVirt/ovirt-ansible-infra/commit/f8f885f039a51d28b74e9... For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/2407/

5 years

1
0
0 / 0

Build failed in Jenkins: system-sync_mirrors-ovirt-master-glusterfs-6-noarch-el8-x86_64 #1

by jenkins＠jenkins.phx.ovirt.org

See <http://jenkins.ovirt.org/job/system-sync_mirrors-ovirt-master-glusterfs-6...> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-ovirt-master-glusterfs-6...> No credentials specified Cloning the remote Git repository Cloning repository http://gerrit.ovirt.org/jenkins.git > git init <http://jenkins.ovirt.org/job/system-sync_mirrors-ovirt-master-glusterfs-6...> # timeout=10 Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 No valid HEAD. Skipping the resetting > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 170d586971933a79126b677b5e0b9e1a7333e1b6 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 170d586971933a79126b677b5e0b9e1a7333e1b6 Commit message: "Add mirrors for centos8" First time build. Skipping changelog. [system-sync_mirrors-ovirt-master-glusterfs-6-noarch-el8-x86_64] $ /bin/bash -xe /tmp/jenkins3633369356349620418.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror ovirt-master-glusterfs-6-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror ovirt-master-glusterfs-6-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror ovirt-master-glusterfs-6-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=ovirt-master-glusterfs-6-noarch-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs ovirt-master-glusterfs-6-noarch-el8 yum + local repo_name=ovirt-master-glusterfs-6-noarch-el8 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/ovirt-master-glusterfs-6-noarch-el8 /var/www/html/repos/yum/ovirt-master-glusterfs-6-noarch-el8/base + check_yum_sync_needed ovirt-master-glusterfs-6-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=ovirt-master-glusterfs-6-noarch-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/ovirt-master-glusterfs-6-noarch-el8 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync ovirt-master-glusterfs-6-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=ovirt-master-glusterfs-6-noarch-el8 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=ovirt-master-glusterfs-6-noarch-el8 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/ovirt-master-glusterfs-6-noarch-el8/base --norepopath --newest-only --urls --quiet Not using downloaded epel-el8/repomd.xml because it is older than what we have: Current : Mon Nov 4 04:18:45 2019 Downloaded: Fri Oct 25 17:20:57 2019 Not using downloaded ovirt-master-epel-testing-el8/repomd.xml because it is older than what we have: Current : Tue Nov 5 04:47:00 2019 Downloaded: Mon Nov 4 04:53:55 2019 + reposync_out=https://download.gluster.org/pub/gluster/glusterfs/6/LATEST/... + [[ -n https://download.gluster.org/pub/gluster/glusterfs/6/LATEST/RHEL/el-8/noa... ]] + eval sync_needed=true ++ sync_needed=true + return + [[ -n true ]] + install_repo_pubkey ovirt-master-glusterfs-6-noarch-el8 jenkins/data/mirrors-reposync.conf + local repo_name=ovirt-master-glusterfs-6-noarch-el8 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local gpg_key_file ++ sed -nr -e '/\[ovirt-master-glusterfs-6-noarch-el8]/{ :loop; s#^gpgkey\s*=\s*file://(.*)$#\1#p; n; /^\[.*\]$/q ; b loop }' jenkins/data/mirrors-reposync.conf + gpg_key_file= + [[ -n '' ]] + echo 'Resyncing repo: ovirt-master-glusterfs-6-noarch-el8' Resyncing repo: ovirt-master-glusterfs-6-noarch-el8 + perform_yum_sync ovirt-master-glusterfs-6-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=ovirt-master-glusterfs-6-noarch-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local repo_mp + local repo_comps + repo_mp=/var/www/html/repos/yum/ovirt-master-glusterfs-6-noarch-el8/base ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' + echo 'Syncing yum repo ovirt-master-glusterfs-6-noarch-el8 for arch: x86_64' Syncing yum repo ovirt-master-glusterfs-6-noarch-el8 for arch: x86_64 + run_reposync ovirt-master-glusterfs-6-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf --downloadcomps --gpgcheck + local repo_name=ovirt-master-glusterfs-6-noarch-el8 + local repo_arch=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + extra_args=("${@:4}") + local extra_args + reposync --config=jenkins/data/mirrors-reposync.conf --repoid=ovirt-master-glusterfs-6-noarch-el8 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/ovirt-master-glusterfs-6-noarch-el8/base --norepopath --newest-only --downloadcomps --gpgcheck glusterfs-resource-agents- 0% [ ] 0.0 B/s | 0 B --:-- ETA warning: /var/www/html/repos/yum/ovirt-master-glusterfs-6-noarch-el8/base/glusterfs-resource-agents-6.6-1.el8.noarch.rpm: Header V4 RSA/SHA256 Signature, key ID c2f8238c: NOKEY Public key for glusterfs-resource-agents-6.6-1.el8.noarch.rpm is not installed glusterfs-resource-agents-6.6-1.el8.noarch.rpm | 43 kB 00:00 Removing glusterfs-resource-agents-6.6-1.el8.noarch.rpm, due to missing GPG key. Build step 'Execute shell' marked build as failure

5 years

1
1
0 / 0

[JIRA] (OVIRT-2798) add ovirt-provider-ovn project to the new gating system

by Anton Marchukov (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2798?page=com.atlassian.jir... ] Anton Marchukov reassigned OVIRT-2798: -------------------------------------- Assignee: Ehud Yonasi (was: infra) > add ovirt-provider-ovn project to the new gating system > ------------------------------------------------------- > > Key: OVIRT-2798 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2798 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Miguel Duarte de Mora Barroso > Assignee: Ehud Yonasi > > Hi, > I'd like to request that ovirt-provider-ovn is added to the new gating system. > Thanks in advance, > Miguel -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100114)

5 years

1
0
0 / 0

[CQ]: 104418,2 (jenkins) failed "dummy-master" system tests

by oVirt Jenkins

Change 104418,2 (jenkins) is probably the reason behind recent system test failures in the "dummy-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/104418/2 For failed test results see: http://jenkins.ovirt.org/job/dummy-master_change-queue-tester/151/

5 years

1
0
0 / 0

[oVirt Jenkins] deploy-to-gated-dummy-master - Build #84 - FAILURE!

by jenkins＠jenkins.phx.ovirt.org

Build: http://jenkins.ovirt.org/job/deploy-to-gated-dummy-master/84/ Build Name: #84 Build Status: FAILURE Gerrit change: null - title: null - project: null - branch: null - author: null <null>

5 years

1
0
0 / 0

[JENKINS] Failed to setup proejct ovirt-system-tests_standard-check-patch

by jenkins＠jenkins.phx.ovirt.org

Failed to run project_setup.sh for: #5905 ovirt-system-tests [check-patch]. It probably means that docker_cleanup.py failed. This step doesn't fail the job, but we do collect data about such failures to find the root cause. Infra owner, ensure that we're not running out of disk space on openshift-integ-tests-container-1jzjl.

5 years

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Infra November 2019