Jenkins Developer group
by Andrej Cernek
Hi,
I am intern in the oVirt networking team, but I am missing the
Gerrit/ManualTrigger permission. Could you add me to the Developer group?
My user ID is acernek.
Thank you
5 years, 4 months
[ovirt-devel] [Ovirt] [CQ weekly status] [19-07-2019]
by Dusan Fodor
Hi,
This mail is to provide the current status of CQ and allow people to review
status before and after the weekend.
Please refer to below colour map for further information on the meaning of
the colours.
*CQ-4.2*: GREEN (#1)
Last failure was on 02-07 for ovirt-provider-ovm due to failed test:
098_ovirt_provider_ovn.use_ovn_provide. This was a code regression and
which was fixed.
*CQ-4.3*: GREEN (#1)
Last failure was on 12-07 for ovirt-provider-ovm due to failed
build-artifacts which was caused due to a mirror issue.
*CQ-Master:* GREEN (#1)
Last failure was on 16-07 for ovirt-engine due failure in build-artifacts,
which was caused by gerrit issue, which is under investigation by Evgheni.
Current running jobs for 4.2 [1], 4.3 [2] and master [3] can be found
here:
[1]
http://jenkins.ovirt.org/view/Change%20queue%20jobs/job/ovirt-4.2_change-...
[2]
https://jenkins.ovirt.org/view/Change%20queue%20jobs/job/ovirt-4.3_change...
[3]
http://jenkins.ovirt.org/view/Change%20queue%20jobs/job/ovirt-master_chan...
Happy week!
Dusan
-------------------------------------------------------------------------------------------------------------------
COLOUR MAP
Green = job has been passing successfully
** green for more than 3 days may suggest we need a review of our test
coverage
1.
1-3 days GREEN (#1)
2.
4-7 days GREEN (#2)
3.
Over 7 days GREEN (#3)
Yellow = intermittent failures for different projects but no lasting or
current regressions
** intermittent would be a healthy project as we expect a number of
failures during the week
** I will not report any of the solved failures or regressions.
1.
Solved job failures YELLOW (#1)
2.
Solved regressions YELLOW (#2)
Red = job has been failing
** Active Failures. The colour will change based on the amount of time the
project/s has been broken. Only active regressions would be reported.
1.
1-3 days RED (#1)
2.
4-7 days RED (#2)
3.
Over 7 days RED (#3)
_______________________________________________
Devel mailing list -- devel(a)ovirt.org
To unsubscribe send an email to devel-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/devel@ovirt.org/message/YCNCKRK3G4E...
5 years, 4 months
Build failed in Jenkins:
system-sync_mirrors-centos-updates-el7-x86_64 #2884
by jenkins@jenkins.phx.ovirt.org
See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-el7-x86_6...>
------------------------------------------
Started by timer
[EnvInject] - Loading node environment variables.
Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-el7-x86_6...>
No credentials specified
> git rev-parse --is-inside-work-tree # timeout=10
Fetching changes from the remote Git repository
> git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10
Cleaning workspace
> git rev-parse --verify HEAD # timeout=10
Resetting working tree
> git reset --hard # timeout=10
> git clean -fdx # timeout=10
Pruning obsolete local branches
Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git
> git --version # timeout=10
> git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune
> git rev-parse origin/master^{commit} # timeout=10
Checking out Revision 9b5f5fcdb80b40f2e5c7dfdb384c54ff533eeb29 (origin/master)
> git config core.sparsecheckout # timeout=10
> git checkout -f 9b5f5fcdb80b40f2e5c7dfdb384c54ff533eeb29
Commit message: "gate: Make tests list visible in BlueOcean"
> git rev-list --no-walk 9b5f5fcdb80b40f2e5c7dfdb384c54ff533eeb29 # timeout=10
[system-sync_mirrors-centos-updates-el7-x86_64] $ /bin/bash -xe /tmp/jenkins1188969467314769647.sh
+ jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf
+ MIRRORS_MP_BASE=/var/www/html/repos
+ MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos
+ MIRRORS_CACHE=/home/jenkins/mirrors_cache
+ MAX_LOCK_ATTEMPTS=120
+ LOCK_WAIT_INTERVAL=5
+ LOCK_BASE=/home/jenkins
+ OLD_MD_TO_KEEP=100
+ HTTP_SELINUX_TYPE=httpd_sys_content_t
+ HTTP_FILE_MODE=644
+ main resync_yum_mirror centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf
+ local command=resync_yum_mirror
+ command_args=("${@:2}")
+ local command_args
+ cmd_resync_yum_mirror centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf
+ local repo_name=centos-updates-el7
+ local repo_archs=x86_64
+ local reposync_conf=jenkins/data/mirrors-reposync.conf
+ local sync_needed
+ mkdir -p /home/jenkins/mirrors_cache
+ verify_repo_fs centos-updates-el7 yum
+ local repo_name=centos-updates-el7
+ local repo_type=yum
+ sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-updates-el7 /var/www/html/repos/yum/centos-updates-el7/base
+ check_yum_sync_needed centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed
+ local repo_name=centos-updates-el7
+ local repo_archs=x86_64
+ local reposync_conf=jenkins/data/mirrors-reposync.conf
+ local p_sync_needed=sync_needed
+ local reposync_out
+ echo 'Checking if mirror needs a resync'
Checking if mirror needs a resync
+ rm -rf /home/jenkins/mirrors_cache/centos-updates-el7
++ IFS=,
++ echo x86_64
+ for arch in '$(IFS=,; echo $repo_archs)'
++ run_reposync centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet
++ local repo_name=centos-updates-el7
++ local repo_arch=x86_64
++ local reposync_conf=jenkins/data/mirrors-reposync.conf
++ extra_args=("${@:4}")
++ local extra_args
++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-updates-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-updates-el7/base --norepopath --newest-only --urls --quiet
Traceback (most recent call last):
File "/usr/bin/reposync", line 373, in <module>
main()
File "/usr/bin/reposync", line 185, in main
my.doRepoSetup()
File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup
return self._getRepos(thisrepo, True)
File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos
self._repos.doSetup(thisrepo)
File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup
self.retrieveAllMD()
File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD
dl = repo._async and repo._commonLoadRepoXML(repo)
File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML
result = self._getFileRepoXML(local, text)
File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML
size=102400) # setting max size as 100K
File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1042, in _getFile
raise e
yum.Errors.NoMoreMirrorsRepoError: failure: repodata/repomd.xml from mock-copr-fc30: [Errno 256] No more mirrors to try.
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
https://copr-be.cloud.fedoraproject.org/results/@mock/mock/fedora-30-x86_...: [Errno 14] curl#7 - "Failed connect to copr-be.cloud.fedoraproject.org:443; Connection refused"
+ reposync_out=
Build step 'Execute shell' marked build as failure
5 years, 4 months