July 2019 - Infra - Ovirt List Archives

[CQ]: 101773, 2 (ovirt-provider-ovn) failed "ovirt-master" system tests

by oVirt Jenkins

Change 101773,2 (ovirt-provider-ovn) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/101773/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/15117/

5 years, 3 months

1
0
0 / 0

[CQ]: 101773, 2 (ovirt-provider-ovn) failed "ovirt-master" system tests

by oVirt Jenkins

Change 101773,2 (ovirt-provider-ovn) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/101773/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/15114/

5 years, 3 months

1
0
0 / 0

[CQ]: 102089,4 (ovirt-engine) failed "ovirt-master" system tests

by oVirt Jenkins

Change 102089,4 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/102089/4 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/15112/

5 years, 3 months

1
0
0 / 0

[CQ]: 101773,2 (ovirt-provider-ovn) failed "ovirt-4.3" system tests

by oVirt Jenkins

Change 101773,2 (ovirt-provider-ovn) is probably the reason behind recent system test failures in the "ovirt-4.3" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/101773/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/1555/

5 years, 3 months

1
0
0 / 0

git clone timed out (was: Change in ovirt-engine[master]: packaging: setup: Write postinstall as binary data)

by Yedidyah Bar David

On Wed, Jul 24, 2019 at 9:15 AM Code Review <gerrit(a)ovirt.org> wrote: > > From Jenkins CI <jenkins(a)ovirt.org>: > > Jenkins CI has posted comments on this change. > > Change subject: packaging: setup: Write postinstall as binary data > ...................................................................... > > > Patch Set 4: > > Build Failed > > http://jenkins.ovirt.org/job/ovirt-engine_master_check-merged-fc29-x86_64... : FAILURE > > http://jenkins.ovirt.org/job/ovirt-engine_master_check-merged-el7-x86_64/... : FAILURE > > http://jenkins.ovirt.org/job/ovirt-engine_master_build-artifacts-el7-x86_... : FAILURE Failed due to timeout (10 minutes) trying to clone the engine git repo. Transfer rate was around 300-400 KiB/s, quite slow IMO. Perhaps we can cache/mirror that somehow more closely? Tried to re-merge, for now. > > http://jenkins.ovirt.org/job/standard-enqueue/22842/ : > This change was successfully submitted to the change queue(s) for system testing. > > > http://jenkins.ovirt.org/job/ovirt-engine_master_build-artifacts-fc29-x86... : SUCCESS > > -- > To view, visit https://gerrit.ovirt.org/102089 > To unsubscribe, visit https://gerrit.ovirt.org/settings > > Gerrit-Project: ovirt-engine > Gerrit-Branch: master > Gerrit-MessageType: comment > Gerrit-Change-Id: I047b134e9330071f8c30e03065bd26bed56f0aee > Gerrit-Change-Number: 102089 > Gerrit-PatchSet: 4 > Gerrit-Owner: Yedidyah Bar David <didi(a)redhat.com> > Gerrit-Reviewer: Asaf Rachmani <arachman(a)redhat.com> > Gerrit-Reviewer: Evgeny Slutsky <eslutsky(a)redhat.com> > Gerrit-Reviewer: Gal Zaidman <gzaidman(a)redhat.com> > Gerrit-Reviewer: Ido Rosenzwig <irosenzw(a)redhat.com> > Gerrit-Reviewer: Jenkins CI <jenkins(a)ovirt.org> > Gerrit-Reviewer: Lev Veyde <lveyde(a)redhat.com> > Gerrit-Reviewer: Sandro Bonazzola <sbonazzo(a)redhat.com> > Gerrit-Reviewer: Simone Tiraboschi <stirabos(a)redhat.com> > Gerrit-Reviewer: Yedidyah Bar David <didi(a)redhat.com> > Gerrit-Reviewer: gerrit-hooks <automation(a)ovirt.org> > Gerrit-Comment-Date: Wed, 24 Jul 2019 06:14:59 +0000 > Gerrit-HasComments: No -- Didi

5 years, 3 months

2
1
0 / 0

[CQ]: 102089,4 (ovirt-engine) failed "ovirt-master" system tests

by oVirt Jenkins

Change 102089,4 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/102089/4 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/15108/

5 years, 3 months

1
0
0 / 0

oVirt infra daily report - unstable production jobs - 895

by jenkins＠jenkins.phx.ovirt.org

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/895//artifact/exported... Cheers, Jenkins

5 years, 3 months

1
0
0 / 0

planned Jenkins restart

by Evgheni Dereveanchin

Hi everyone, I'll be performing a planned Jenkins restart within the next hour. No new jobs will be scheduled during this maintenance period. I will inform you once it is back online. -- Regards, Evgheni Dereveanchin

5 years, 3 months

1
1
0 / 0

Build failed in Jenkins: system-sync_mirrors-centos-opstools-testing-el7-x86_64 #2751

by jenkins＠jenkins.phx.ovirt.org

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-testing-...> Changes: [Dafna Ron] Adding repo sac-gluster-ansible-el7 to local mirror ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-opstools-testing-...> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 4bdc9bbf0f723360cc3ebd6e0be463c590fc177a (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 4bdc9bbf0f723360cc3ebd6e0be463c590fc177a Commit message: "Adding repo sac-gluster-ansible-el7 to local mirror" > git rev-list --no-walk 3c337f29192b67cf47c633c09bf47ed807ae594b # timeout=10 [system-sync_mirrors-centos-opstools-testing-el7-x86_64] $ /bin/bash -xe /tmp/jenkins5136123685016207361.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-opstools-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-opstools-testing-el7 yum + local repo_name=centos-opstools-testing-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-opstools-testing-el7 /var/www/html/repos/yum/centos-opstools-testing-el7/base + check_yum_sync_needed centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-opstools-testing-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-opstools-testing-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-opstools-testing-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-opstools-testing-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-opstools-testing-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-opstools-testing-el7/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML size=102400) # setting max size as 100K File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1042, in _getFile raise e yum.Errors.NoMoreMirrorsRepoError: failure: repodata/repomd.xml from sac-gluster-ansible-el7: [Errno 256] No more mirrors to try. https://copr-be.cloud.fedoraproject.org/results/sac/gluster-ansible/repod...: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

5 years, 3 months

1
2
0 / 0

Build failed in Jenkins: system-sync_mirrors-centos-ovirt-common-el7-x86_64 #2263

by jenkins＠jenkins.phx.ovirt.org

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-ovirt-common-el7-...> Changes: [Dafna Ron] Adding repo sac-gluster-ansible-el7 to local mirror ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-ovirt-common-el7-...> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 4bdc9bbf0f723360cc3ebd6e0be463c590fc177a (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 4bdc9bbf0f723360cc3ebd6e0be463c590fc177a Commit message: "Adding repo sac-gluster-ansible-el7 to local mirror" > git rev-list --no-walk 3c337f29192b67cf47c633c09bf47ed807ae594b # timeout=10 [system-sync_mirrors-centos-ovirt-common-el7-x86_64] $ /bin/bash -xe /tmp/jenkins1298084813744896539.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-ovirt-common-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-ovirt-common-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-ovirt-common-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-ovirt-common-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-ovirt-common-el7 yum + local repo_name=centos-ovirt-common-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-ovirt-common-el7 /var/www/html/repos/yum/centos-ovirt-common-el7/base + check_yum_sync_needed centos-ovirt-common-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-ovirt-common-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-ovirt-common-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-ovirt-common-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-ovirt-common-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-ovirt-common-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-ovirt-common-el7/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML size=102400) # setting max size as 100K File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1042, in _getFile raise e yum.Errors.NoMoreMirrorsRepoError: failure: repodata/repomd.xml from sac-gluster-ansible-el7: [Errno 256] No more mirrors to try. https://copr-be.cloud.fedoraproject.org/results/sac/gluster-ansible/repod...: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

5 years, 3 months

1
2
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Infra July 2019