August 2019 - Infra - oVirt List Archives

[JIRA] (OVIRT-2782) Configure Jenkins to wait less and allocate more
by Daniel Belenky (oVirt JIRA) 25 Aug '19

25 Aug '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2782?page=com.atlassian.jira.… ] Daniel Belenky updated OVIRT-2782: ---------------------------------- Description: By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting {code:java} hudson.slaves.NodeProvisioner.initialDelay {code} to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can control it's margins to lower its threshold so that Jenkins will allocate nodes faster and in advance. The recommended settings by the k8s plugin to spawn a node for every build in the queue: ``` By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can lower its threshold so that Jenkins will allocate nodes faster and in advance. {code:java} -Dhudson.slaves.NodeProvisioner.initialDelay=0 -Dhudson.slaves.NodeProvisioner.MARGIN=50 -Dhudson.slaves.NodeProvisioner.MARGIN0=0.85 {code} was: By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can control it's margins to lower its threshold so that Jenkins will allocate nodes faster and in advance. The recommended settings by the k8s plugin to spawn a node for every build in the queue: ``` By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can lower its threshold so that Jenkins will allocate nodes faster and in advance. {code:java} -Dhudson.slaves.NodeProvisioner.initialDelay=0 -Dhudson.slaves.NodeProvisioner.MARGIN=50 -Dhudson.slaves.NodeProvisioner.MARGIN0=0.85 {code} > Configure Jenkins to wait less and allocate more > ------------------------------------------------ > > Key: OVIRT-2782 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2782 > Project: oVirt - virtualization made easy > Issue Type: Improvement > Reporter: Daniel Belenky > Assignee: infra > > By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting > {code:java} > hudson.slaves.NodeProvisioner.initialDelay > {code} > to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can control it's margins to lower its threshold so that Jenkins will allocate nodes faster and in advance. > The recommended settings by the k8s plugin to spawn a node for every build in the queue: > ``` > By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can lower its threshold so that Jenkins will allocate nodes faster and in advance. > {code:java} > -Dhudson.slaves.NodeProvisioner.initialDelay=0 > -Dhudson.slaves.NodeProvisioner.MARGIN=50 > -Dhudson.slaves.NodeProvisioner.MARGIN0=0.85 > {code} -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100107)

1 0

[JIRA] (OVIRT-2782) Configure Jenkins to wait less and allocate more
by Daniel Belenky (oVirt JIRA) 25 Aug '19

25 Aug '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2782?page=com.atlassian.jira.… ] Daniel Belenky updated OVIRT-2782: ---------------------------------- Description: By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can control it's margins to lower its threshold so that Jenkins will allocate nodes faster and in advance. The recommended settings by the k8s plugin to spawn a node for every build in the queue: ``` By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can lower its threshold so that Jenkins will allocate nodes faster and in advance. {code:java} -Dhudson.slaves.NodeProvisioner.initialDelay=0 -Dhudson.slaves.NodeProvisioner.MARGIN=50 -Dhudson.slaves.NodeProvisioner.MARGIN0=0.85 {code} was: By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can control it's margins to lower its threshold so that Jenkins will allocate nodes faster and in advance. The recommended settings by the k8s plugin to spawn a node for every build in the queue: ``` By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can lower its threshold so that Jenkins will allocate nodes faster and in advance. ``` -Dhudson.slaves.NodeProvisioner.initialDelay=0 -Dhudson.slaves.NodeProvisioner.MARGIN=50 -Dhudson.slaves.NodeProvisioner.MARGIN0=0.85 ``` > Configure Jenkins to wait less and allocate more > ------------------------------------------------ > > Key: OVIRT-2782 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2782 > Project: oVirt - virtualization made easy > Issue Type: Improvement > Reporter: Daniel Belenky > Assignee: infra > > By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can control it's margins to lower its threshold so that Jenkins will allocate nodes faster and in advance. > The recommended settings by the k8s plugin to spawn a node for every build in the queue: > ``` > By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can lower its threshold so that Jenkins will allocate nodes faster and in advance. > {code:java} > -Dhudson.slaves.NodeProvisioner.initialDelay=0 > -Dhudson.slaves.NodeProvisioner.MARGIN=50 > -Dhudson.slaves.NodeProvisioner.MARGIN0=0.85 > {code} -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100107)

1 0

[JIRA] (OVIRT-2782) Configure Jenkins to wait less and allocate more
by Daniel Belenky (oVirt JIRA) 25 Aug '19

25 Aug '19

Daniel Belenky created OVIRT-2782: ------------------------------------- Summary: Configure Jenkins to wait less and allocate more Key: OVIRT-2782 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2782 Project: oVirt - virtualization made easy Issue Type: Improvement Reporter: Daniel Belenky Assignee: infra By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can control it's margins to lower its threshold so that Jenkins will allocate nodes faster and in advance. The recommended settings by the k8s plugin to spawn a node for every build in the queue: ``` By default, Jenkins is configured to wait a few seconds before allocating a new node in a hope that a node in use to be freed. We can control this setting by setting `hudson.slaves.NodeProvisioner.initialDelay` to `0`. But, because Jenkins computes the excess workload value (which decides if we need to allocate a new node) using an EMA, we also can lower its threshold so that Jenkins will allocate nodes faster and in advance. ``` -Dhudson.slaves.NodeProvisioner.initialDelay=0 -Dhudson.slaves.NodeProvisioner.MARGIN=50 -Dhudson.slaves.NodeProvisioner.MARGIN0=0.85 ``` -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100107)

1 0

oVirt infra daily report - unstable production jobs - 927
by jenkins＠jenkins.phx.ovirt.org 25 Aug '19

25 Aug '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/927//artifact/exported-a… Cheers, Jenkins

1 0

oVirt infra daily report - unstable production jobs - 926
by jenkins＠jenkins.phx.ovirt.org 24 Aug '19

24 Aug '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/926//artifact/exported-a… Cheers, Jenkins

1 0

[CQ]: 101914, 12 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 23 Aug '19

23 Aug '19

A system test invoked by the "ovirt-master" change queue including change 101914,12 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 101913,10 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 101913,10 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/101914/12 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/101913/10 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/15492/

1 0

[CQ]: 101913,10 (ovirt-engine) failed "ovirt-master" system tests
by oVirt Jenkins 23 Aug '19

23 Aug '19

Change 101913,10 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/101913/10 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/15490/

1 0

oVirt infra daily report - unstable production jobs - 925
by jenkins＠jenkins.phx.ovirt.org 23 Aug '19

23 Aug '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/925//artifact/exported-a… Cheers, Jenkins

1 0

Build failed in Jenkins: system-sync_mirrors-centos-qemu-ev-release-el7-x86_64 #2354
by jenkins＠jenkins.phx.ovirt.org 22 Aug '19

22 Aug '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-release-el7…> ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-qemu-ev-release-el7…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision cfeb68c000d32e1c9843a2f8650b7b9a65e01a8e (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f cfeb68c000d32e1c9843a2f8650b7b9a65e01a8e Commit message: "Disable use_bootstrap_container for Fedora rawhide" > git rev-list --no-walk cfeb68c000d32e1c9843a2f8650b7b9a65e01a8e # timeout=10 [system-sync_mirrors-centos-qemu-ev-release-el7-x86_64] $ /bin/bash -xe /tmp/jenkins6854356434980691008.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-qemu-ev-release-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-qemu-ev-release-el7 yum + local repo_name=centos-qemu-ev-release-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-qemu-ev-release-el7 /var/www/html/repos/yum/centos-qemu-ev-release-el7/base + check_yum_sync_needed centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-qemu-ev-release-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-qemu-ev-release-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-qemu-ev-release-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-qemu-ev-release-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-qemu-ev-release-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-qemu-ev-release-el7/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1477, in _commonLoadRepoXML if self._latestRepoXML(local): File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1455, in _latestRepoXML repomd = self.metalink_data.repomd File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 921, in <lambda> metalink_data = property(fget=lambda self: self._getMetalink(), File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 917, in _getMetalink self._metalink = metalink.MetaLinkRepoMD(self.metalink_filename) File "/usr/lib/python2.7/site-packages/yum/metalink.py", line 189, in __init__ raise MetaLinkRepoErrorParseFail, "File %s is not XML" % filename yum.metalink.MetaLinkRepoErrorParseFail: File /home/jenkins/mirrors_cache/fedora-base-fc29/metalink.xml is not XML + reposync_out='Could not get metalink https://mirrors.fedoraproject.org/metalink?repo=fedora-29&arch=x86_64 error was 16: error opening file from https://mirrors.fedoraproject.org/metalink?repo=fedora-29&arch=x86_64, IOError: [Errno 2] No such file or directory: '\''/home/jenkins/mirrors_cache/fedora-base-fc29/metalink.xml.tmp'\''' Build step 'Execute shell' marked build as failure

1 1

[JIRA] (OVIRT-2781) https://artifactory.ovirt.org/ has invalid ssl certificate for HSTS
by Sandro Bonazzola (oVirt JIRA) 22 Aug '19

22 Aug '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2781?page=com.atlassian.jira.… ] Sandro Bonazzola reassigned OVIRT-2781: --------------------------------------- Assignee: Evgheni Dereveanchin (was: infra) > https://artifactory.ovirt.org/ has invalid ssl certificate for HSTS > ------------------------------------------------------------------- > > Key: OVIRT-2781 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2781 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Sandro Bonazzola > Assignee: Evgheni Dereveanchin > > https://artifactory.ovirt.org/ has invalid ssl certificate for HSTS, > expired on June, 26th 2019 > Please fix ssl certificate. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100107)

1 0