April 2020 - Infra - Ovirt List Archives

oVirt infra daily report - unstable production jobs - 1176

by jenkins＠jenkins.phx.ovirt.org

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1176//artifact/export... Cheers, Jenkins

4 years, 6 months

1
0
0 / 0

[CQ]: 104430, 54 (ovirt-system-tests) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 104430,54 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 108685,2 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108685,2 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/104430/54 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108685/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23430/

4 years, 6 months

1
0
0 / 0

[CQ]: 107039, 1 (ovirt-scheduler-proxy) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 107039,1 (ovirt-scheduler-proxy) failed. However, this change seems not to be the root cause for this failure. Change 106514,13 (ovirt-scheduler-proxy) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106514,13 (ovirt-scheduler- proxy) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107039/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106514/13 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23427/

4 years, 6 months

1
0
0 / 0

[CQ]: 108685, 2 (ovirt-system-tests) failed "ovirt-master" system tests

by oVirt Jenkins

Change 108685,2 (ovirt-system-tests) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/108685/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23423/

4 years, 6 months

1
0
0 / 0

[CQ]: 108708, 3 (ovirt-system-tests) failed "ovirt-4.3" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-4.3" change queue including change 108708,3 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 108560,4 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108560,4 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108708/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108560/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3325/

4 years, 6 months

1
0
0 / 0

[CQ]: 108633, 3 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 108633,3 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 107284,12 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107284,12 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108633/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107284/12 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23419/

4 years, 6 months

1
0
0 / 0

Build failed in Jenkins: system-sync_mirrors-ovirt-master-glusterfs-7-noarch-el8-x86_64 #61

by jenkins＠jenkins.phx.ovirt.org

See <https://jenkins.ovirt.org/job/system-sync_mirrors-ovirt-master-glusterfs-...> Changes: [Sandro Bonazzola] ovirt-engine: drop jobs for legacy versions ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-ovirt-master-glusterfs-...> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision e66b4ce39605bd46fb200b9acaa9d5006a6d22b6 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f e66b4ce39605bd46fb200b9acaa9d5006a6d22b6 Commit message: "ovirt-engine: drop jobs for legacy versions" > git rev-list --no-walk ace213f7b116f5671c1fd77415c719ca80020f6c # timeout=10 [system-sync_mirrors-ovirt-master-glusterfs-7-noarch-el8-x86_64] $ /bin/bash -xe /tmp/jenkins385556151567114616.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror ovirt-master-glusterfs-7-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror ovirt-master-glusterfs-7-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror ovirt-master-glusterfs-7-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=ovirt-master-glusterfs-7-noarch-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs ovirt-master-glusterfs-7-noarch-el8 yum + local repo_name=ovirt-master-glusterfs-7-noarch-el8 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/ovirt-master-glusterfs-7-noarch-el8 /var/www/html/repos/yum/ovirt-master-glusterfs-7-noarch-el8/base + check_yum_sync_needed ovirt-master-glusterfs-7-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=ovirt-master-glusterfs-7-noarch-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/ovirt-master-glusterfs-7-noarch-el8 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync ovirt-master-glusterfs-7-noarch-el8 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=ovirt-master-glusterfs-7-noarch-el8 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=ovirt-master-glusterfs-7-noarch-el8 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/ovirt-master-glusterfs-7-noarch-el8/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/repomd.xml from ovirt-master-glusterfs-7-el8: [Errno 256] No more mirrors to try. https://download.gluster.org/pub/gluster/glusterfs/7/LATEST/RHEL/el-8/x86...: [Errno 14] HTTPS Error 404 - Not Found + reposync_out= Build step 'Execute shell' marked build as failure

4 years, 6 months

1
21
0 / 0

[JIRA] (OVIRT-2917) Vagrant VM container

by Anton Marchukov (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2917?page=com.atlassian.jir... ] Anton Marchukov reassigned OVIRT-2917: -------------------------------------- Assignee: Anton Marchukov (was: infra) > Vagrant VM container > -------------------- > > Key: OVIRT-2917 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2917 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Ales Musil > Assignee: Anton Marchukov > > Hi, > is there any documentation on how to use the new container backend with the > CI container that spawns VM for privileged operations? > Thank you. > Regards, > Ales > -- > Ales Musil > Software Engineer - RHV Network > Red Hat EMEA <https://www.redhat.com> > amusil(a)redhat.com IM: amusil > <https://red.ht/sig> -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100125)

4 years, 6 months

1
0
0 / 0

[CQ]: 108532, 8 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 108532,8 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 107284,12 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107284,12 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108532/8 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107284/12 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23415/

4 years, 6 months

1
0
0 / 0

Build failed in Jenkins: system-sync_mirrors-centos-powertools-el8-x86_64 #4

by jenkins＠jenkins.phx.ovirt.org

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-powertools-el8-x...> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-powertools-el8-x...> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d4f54f4f3183725f0deb171d3b4646fce3856a17 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d4f54f4f3183725f0deb171d3b4646fce3856a17 Commit message: "Use repodata directory as modfyrepo path" > git rev-list --no-walk d4f54f4f3183725f0deb171d3b4646fce3856a17 # timeout=10 [system-sync_mirrors-centos-powertools-el8-x86_64] $ /bin/bash -xe /tmp/jenkins707503800581123231.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-powertools-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-powertools-el8 yum + local repo_name=centos-powertools-el8 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-powertools-el8 /var/www/html/repos/yum/centos-powertools-el8/base + check_yum_sync_needed centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-powertools-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-powertools-el8 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-powertools-el8 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-powertools-el8 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-powertools-el8/base --norepopath --newest-only --urls --quiet Error setting up repositories: Error making cache directory: /home/jenkins/mirrors_cache/ovirt-master-glusterfs-7-noarch-el8/gen error was: [Errno 17] File exists: '/home/jenkins/mirrors_cache/ovirt-master-glusterfs-7-noarch-el8/gen' + reposync_out= Build step 'Execute shell' marked build as failure

4 years, 6 months

1
2
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Infra April 2020