September 2017 - Infra - oVirt List Archives

[CQ]: 81758, 1 (cockpit-ovirt) failed "ovirt-4.1" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Sep '17

14 Sep '17

A system test invoked by the "ovirt-4.1" change queue including change 81758,1 (cockpit-ovirt) failed. However, this change seems not to be the root cause for this failure. Change 81755,1 (cockpit-ovirt) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 81755,1 (cockpit-ovirt) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/81758/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/81755/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.1_change-queue-tester/1000/

1 0

[JIRA] (OVIRT-1649) Include summary, owner and component of suspected patch in OST Failure Report
by danken (oVirt JIRA) 14 Sep '17

14 Sep '17

danken created OVIRT-1649: ----------------------------- Summary: Include summary, owner and component of suspected patch in OST Failure Report Key: OVIRT-1649 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-1649 Project: oVirt - virtualization made easy Issue Type: By-EMAIL Reporter: danken Assignee: infra $subject would make it easier and quicker to check if the suspicion is correct. -- This message was sent by Atlassian {0} (v1001.0.0-SNAPSHOT#100059)

2 1

[CQ]: 81756, 1 (cockpit-ovirt) failed "ovirt-4.1" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Sep '17

14 Sep '17

A system test invoked by the "ovirt-4.1" change queue including change 81756,1 (cockpit-ovirt) failed. However, this change seems not to be the root cause for this failure. Change 81755,1 (cockpit-ovirt) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 81755,1 (cockpit-ovirt) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/81756/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/81755/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.1_change-queue-tester/999/

1 0

[CQ]: 81755,1 (cockpit-ovirt) failed "ovirt-4.1" system tests
by oVirt Jenkins 14 Sep '17

14 Sep '17

Change 81755,1 (cockpit-ovirt) is probably the reason behind recent system test failures in the "ovirt-4.1" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/81755/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.1_change-queue-tester/998/

1 0

[CQ]: 81396, 9 (ovirt-engine-api-model) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Sep '17

14 Sep '17

A system test invoked by the "ovirt-master" change queue including change 81396,9 (ovirt-engine-api-model) failed. However, this change seems not to be the root cause for this failure. Change 81677,1 (ovirt-engine-api-model) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 81677,1 (ovirt-engine-api- model) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/81396/9 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/81677/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/2551/

1 0

Re: [ovirt-devel] [ OST Failure Report ] [ oVirt master ] [ 2017-09-11 ]
by Eyal Edri 14 Sep '17

14 Sep '17

It might be related to patch merged yesterday to fix where we are taking qemu-kvm-rhev from, which now comes from kvm commons. Maybe CQ or the mirrors are not updated? I'll try to look at it when I'm back next to a computer. On Sep 14, 2017 12:45, "Dusan Fodor" <dfodor(a)redhat.com> wrote: Link to suspected patch: https://gerrit.ovirt.org/#/c/80993/19 Link to job: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/2498/ Link to all logs: http://jenkins.ovirt.org/job/ovirt-master_change-queue- tester/2498/artifact/exported-artifacts/basic-suit-master- el7/mock_logs/mocker-epel-7-x86_64.el7.init/ Error snippet from log: <error> DEBUG util.py:533: Executing command: ['/usr/bin/yum', '--installroot', '/var/lib/mock/epel-7-x86_64-01b5c106167c9b71f022fe64bb4fa43a-167519/root/', '--releasever', '7', 'install', '@buildsys-build', 'grubby', 'lago', 'lago-ovirt', 'ovirt-engine-sdk-python', 'python-netaddr', 'python-ovirt-engine-sdk4', '--setopt=tsflags=nocontexts'] with env {'LANG': 'en_US.UTF-8', 'LD_PRELOAD': '/var/tmp/tmp.mock.RxN7kZ/$LIB/nosync.so', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'LC_MESSAGES': 'C.UTF-8', 'STD_CI_STAGE': 'basic_suite_master', 'http_proxy': ' http://proxy01.phx.ovirt.org:3128', 'STD_CI_YUMREPOS': '', 'STD_CI_DISTRO': 'el7', 'HOSTNAME': 'mock', 'PROMPT_COMMAND': 'printf "\\033]0;<mock-chroot>\\007"', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'HOME': '/builddir', 'PS1': '<mock-chroot> \\s-\\v\\$ '} and shell False DEBUG util.py:450: Failed to set locale, defaulting to C DEBUG util.py:450: Error: Package: python-lago-0.41.0-1.el7.centos.noarch (lago) DEBUG util.py:450: Requires: qemu-kvm-rhev >= 2.1.2 DEBUG util.py:450: Error: Package: python-lago-0.41.0-1.el7.centos.noarch (lago) DEBUG util.py:450: Requires: qemu-img-rhev >= 2.1.2 </error> _______________________________________________ Devel mailing list Devel(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/devel

1 0

[oVirt Jenkins] ovirt-node-ng_ovirt-4.2-pre_build-artifacts-el7-x86_64 - Build # 10 - Failure!
by jenkins＠jenkins.phx.ovirt.org 14 Sep '17

14 Sep '17

------=_Part_421_2106082774.1505312361649 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Project: http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.2-pre_build-artifacts-el… Build: http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.2-pre_build-artifacts-el… Build Number: 10 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #10 [Ryan Barry] Increase the release for 4.2 development ----------------- Failed Tests: ----------------- No tests ran. ------=_Part_421_2106082774.1505312361649--

1 1

[CQ]: 81564, 7 (ovirt-engine-api-model) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Sep '17

14 Sep '17

A system test invoked by the "ovirt-master" change queue including change 81564,7 (ovirt-engine-api-model) failed. However, this change seems not to be the root cause for this failure. Change 81677,1 (ovirt-engine-api-model) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 81677,1 (ovirt-engine-api- model) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/81564/7 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/81677/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/2546/

1 0

Build failed in Jenkins: system-sync_mirrors-epel-el6-x86_64 #710
by jenkins＠jenkins.phx.ovirt.org 14 Sep '17

14 Sep '17

See <http://jenkins.ovirt.org/job/system-sync_mirrors-epel-el6-x86_64/710/displa…> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-epel-el6-x86_64/ws/> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/changes/13/75913/5:patch --prune > git rev-parse origin/patch^{commit} # timeout=10 > git rev-parse patch^{commit} # timeout=10 Checking out Revision 4b0fe3e0c9fba26cdbaafe2b29fddd3411225d6f (patch) Commit message: "Exclude big packages from mirrors" > git config core.sparsecheckout # timeout=10 > git checkout -f 4b0fe3e0c9fba26cdbaafe2b29fddd3411225d6f > git rev-list 4b0fe3e0c9fba26cdbaafe2b29fddd3411225d6f # timeout=10 [system-sync_mirrors-epel-el6-x86_64] $ /bin/bash -xe /tmp/jenkins6543290100856546843.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror epel-el6 x86_64 jenkins/data/mirrors-reposync.conf Checking if mirror needs a resync Traceback (most recent call last): File "/usr/bin/reposync", line 343, in <module> main() File "/usr/bin/reposync", line 175, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1478, in _commonLoadRepoXML self._revertOldRepoXML() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1323, in _revertOldRepoXML os.rename(old_data['old_local'], old_data['local']) OSError: [Errno 2] No such file or directory Build step 'Execute shell' marked build as failure

1 2

[JIRA] (OVIRT-1648) jenkins_check_yaml.sh should give prefix for it's tempdirs
by Daniel Belenky (oVirt JIRA) 14 Sep '17

14 Sep '17

This is a multi-part message in MIME format... ------------=_1505376837-28123-225 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit [ https://ovirt-jira.atlassian.net/browse/OVIRT-1648?page=com.atlassian.jira.… ] Daniel Belenky reassigned OVIRT-1648: ------------------------------------- Assignee: Daniel Belenky (was: infra) > jenkins_check_yaml.sh should give prefix for it's tempdirs > ---------------------------------------------------------- > > Key: OVIRT-1648 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-1648 > Project: oVirt - virtualization made easy > Issue Type: Improvement > Reporter: Daniel Belenky > Assignee: Daniel Belenky > > Since jenkins_check_yaml.sh doesn't give a prefix to the temp dirs it generates, we can't know if a change is referring to new xmls or old ones. > The solution should be adding prefixes to the tempdir. -- This message was sent by Atlassian {0} (v1001.0.0-SNAPSHOT#100059) ------------=_1505376837-28123-225 Content-Type: text/html; charset="UTF-8" Content-Disposition: inline Content-Transfer-Encoding: 7bit <html><body> <pre>[ https://ovirt-jira.atlassian.net/browse/OVIRT-1648?page=com.atlassian.jira.… ]</pre> <h3>Daniel Belenky reassigned OVIRT-1648:</h3> <pre>Assignee: Daniel Belenky (was: infra)</pre> <blockquote><h3>jenkins_check_yaml.sh should give prefix for it's tempdirs</h3> <pre> Key: OVIRT-1648 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-1648 Project: oVirt - virtualization made easy Issue Type: Improvement Reporter: Daniel Belenky Assignee: Daniel Belenky</pre> <p>Since jenkins_check_yaml.sh doesn't give a prefix to the temp dirs it generates, we can't know if a change is referring to new xmls or old ones. The solution should be adding prefixes to the tempdir.</p></blockquote> <p>— This message was sent by Atlassian {0} (v1001.0.0-SNAPSHOT#100059)</p> <img src="https://u4043402.ct.sendgrid.net/wf/open?upn=i5TMWGV99amJbNxJpSp2-2BCmpYLyz…" alt="" width="1" height="1" border="0" style="height:1px !important;width:1px !important;border-width:0 !important;margin-top:0 !important;margin-bottom:0 !important;margin-right:0 !important;margin-left:0 !important;padding-top:0 !important;padding-bottom:0 !important;padding-right:0 !important;padding-left:0 !important;"/> </body></html> ------------=_1505376837-28123-225--

1 0