December 2018 - Infra - Ovirt List Archives

[JIRA] (OVIRT-2633) Add posibility to remove changes from change queue before change, which actually fixes the issue

by Barak Korren (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2633?page=com.atlassian.jir... ] Barak Korren commented on OVIRT-2633: ------------------------------------- Not needed - this request is based on an incorrect assumption that the change queue is testing changes one-by-one serially. In the case mentioned above, if we suppose we already reported P1 as failed, and P10 has been merged, and lets realistically assume it was not merged before the next CQ test started, so what will happen is that P2-P9 will be tested together and fail, and from then it will take Log(2)(8) = 3 cycles to detect and throw away P2. If P10 is merged in the meantime - the next test will test P3-P10 and succeed, passing all changes assuming there are no further regressions. > Add posibility to remove changes from change queue before change, which actually fixes the issue > ------------------------------------------------------------------------------------------------ > > Key: OVIRT-2633 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2633 > Project: oVirt - virtualization made easy > Issue Type: New Feature > Reporter: Martin Perina > Assignee: infra > > Let's have a patch P1, which created an issue and failed verification in change queue. Until a fix is prepared and merged as P10, there were merged other patches P2 - P9. Because P10 is merged as last, it contains all previous changes. And because we already know that P2 - P9 will fail, there is no reason to verify those changes and there should be a way how to remove them from the change queue, so P10 can be verified as soon as possible. Otherwise we are wasting valuable recources. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100096)

5 years, 4 months

1
0
0 / 0

[JIRA] (OVIRT-2633) Add posibility to remove changes from change queue before change, which actually fixes the issue

by Eyal Edri (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2633?page=com.atlassian.jir... ] Eyal Edri commented on OVIRT-2633: ---------------------------------- [~bkorren(a)redhat.com] any thoughts? > Add posibility to remove changes from change queue before change, which actually fixes the issue > ------------------------------------------------------------------------------------------------ > > Key: OVIRT-2633 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2633 > Project: oVirt - virtualization made easy > Issue Type: New Feature > Reporter: Martin Perina > Assignee: infra > > Let's have a patch P1, which created an issue and failed verification in change queue. Until a fix is prepared and merged as P10, there were merged other patches P2 - P9. Because P10 is merged as last, it contains all previous changes. And because we already know that P2 - P9 will fail, there is no reason to verify those changes and there should be a way how to remove them from the change queue, so P10 can be verified as soon as possible. Otherwise we are wasting valuable recources. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100096)

5 years, 4 months

1
0
0 / 0

[CQ]: 96299, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 96299,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 96040,9 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 96040,9 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/96299/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/96040/9 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/12108/

5 years, 4 months

1
0
0 / 0

[CQ]: 96298, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 96298,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 96040,9 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 96040,9 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/96298/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/96040/9 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/12102/

5 years, 4 months

1
0
0 / 0

Build failed in Jenkins: system-sync_mirrors-centos-kvm-common-el7-x86_64 #2032

by jenkins＠jenkins.phx.ovirt.org

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-kvm-common-el7-x8...> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-kvm-common-el7-x8...> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/changes/59/95959/1:test --prune > git rev-parse origin/test^{commit} # timeout=10 > git rev-parse test^{commit} # timeout=10 Checking out Revision 05b40dfb4ec43a82530e8c471395d1858e5c59e1 (test) > git config core.sparsecheckout # timeout=10 > git checkout -f 05b40dfb4ec43a82530e8c471395d1858e5c59e1 Commit message: "mirror-reposync: remove gluster-3.10 mirror" > git rev-list --no-walk 05b40dfb4ec43a82530e8c471395d1858e5c59e1 # timeout=10 [system-sync_mirrors-centos-kvm-common-el7-x86_64] $ /bin/bash -xe /tmp/jenkins3985958315118798012.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-kvm-common-el7 x86_64 jenkins/data/mirrors-reposync.conf Checking if mirror needs a resync rm: cannot remove ‘/home/jenkins/mirrors_cache/centos-kvm-common-el7’: Directory not empty Build step 'Execute shell' marked build as failure

5 years, 4 months

1
1
0 / 0

[CQ]: 96297, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 96297,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 96040,9 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 96040,9 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/96297/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/96040/9 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/12096/

5 years, 4 months

1
0
0 / 0

oVirt infra daily report - unstable production jobs - 682

by jenkins＠jenkins.phx.ovirt.org

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/682//artifact/exported... Cheers, Jenkins

5 years, 4 months

1
0
0 / 0

[CQ]: 96296, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 96296,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 96040,9 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 96040,9 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/96296/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/96040/9 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/12090/

5 years, 4 months

1
0
0 / 0

Build failed in Jenkins: system-sync_mirrors-fedora-base-fc29-x86_64 #133

by jenkins＠jenkins.phx.ovirt.org

See <http://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/...> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/ws/> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune ERROR: Error fetching remote repo 'origin' hudson.plugins.git.GitException: Failed to fetch from http://gerrit.ovirt.org/jenkins.git at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:888) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1155) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1186) at hudson.scm.SCM.checkout(SCM.java:504) at hudson.model.AbstractProject.checkout(AbstractProject.java:1208) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1810) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:43) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) Caused by: hudson.plugins.git.GitException: Command "git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune" returned status code 128: stdout: stderr: fatal: unable to access 'http://gerrit.ovirt.org/jenkins.git/': Could not resolve host: gerrit.ovirt.org; Unknown error at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2016) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:1735) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.access$300(CliGitAPIImpl.java:72) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:420) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$1.call(RemoteGitImpl.java:153) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$1.call(RemoteGitImpl.java:146) at hudson.remoting.UserRequest.perform(UserRequest.java:212) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:369) at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72) at java.util.concurrent.FutureTask.run(FutureTask.java:266) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) at java.lang.Thread.run(Thread.java:748) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to mirrors.phx.ovirt.org at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1741) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:357) at hudson.remoting.Channel.call(Channel.java:955) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:146) at sun.reflect.GeneratedMethodAccessor375.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:498) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:132) at com.sun.proxy.$Proxy91.execute(Unknown Source) at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:886) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1155) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1186) at hudson.scm.SCM.checkout(SCM.java:504) at hudson.model.AbstractProject.checkout(AbstractProject.java:1208) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1810) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:43) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) ERROR: Error fetching remote repo 'origin'

5 years, 4 months

1
2
0 / 0

[JIRA] (OVIRT-2630) [VDSM] Tests fail with "missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on vm0038.workers-phx.ovirt.org"

by Nir Soffer (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2630?page=com.atlassian.jir... ] Nir Soffer commented on OVIRT-2630: ----------------------------------- On Fri, Dec 21, 2018 at 11:46 PM Nir Soffer <nsoffer(a)redhat.com> wrote: > On Fri, Dec 21, 2018 at 5:57 PM Nir Soffer <nsoffer(a)redhat.com> wrote: > >> On Fri, Dec 21, 2018 at 1:47 AM Nir Soffer <nsoffer(a)redhat.com> wrote: >> >>> Third time today: >>> >>> Error: >>> sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp >>> /durable-15072b7e/jenkins-result.txt.tmp: >>> No such file or directory >>> mv: cannot stat >>> '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp >>> /durable-15072b7e/jenkins-result.txt.tmp': >>> No such file or directory >>> missing workspace >>> /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on >>> vm0013.workers-phx.ovirt.org >>> >>> Build: >>> >>> https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... >> >> >> Adding devel - if you see this error please report here. >> >> On Thu, Dec 20, 2018 at 10:01 PM Nir Soffer <nsoffer(a)redhat.com> wrote: >>> > >>> > Two incidents on a different slaves today: >>> > >>> > Error: >>> > sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp >>> /durable-d993b7a2/jenkins-result.txt.tmp: >>> > No such file or directory >>> > mv: cannot stat >>> > '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp >>> /durable-d993b7a2/jenkins-result.txt.tmp': >>> > No such file or directory >>> > missing workspace >>> > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on >>> > vm0088.workers-phx.ovirt.org >>> > >>> > Build: >>> > >>> https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... >>> > >>> > >>> > Error: >>> > sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp >>> /durable-edec94a0/jenkins-result.txt.tmp: >>> > No such file or directory >>> > mv: cannot stat >>> > '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp >>> /durable-edec94a0/jenkins-result.txt.tmp': >>> > No such file or directory >>> > missing workspace >>> > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on >>> > vm0013.workers-phx.ovirt.org >>> > >>> > Build: >>> > >>> https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... >>> > >>> > On Wed, Dec 19, 2018 at 4:36 PM Nir Soffer <nsoffer(a)redhat.com> wrote: >>> > > >>> > > I have seen this before, very strange failure. >>> > > >>> > > The job run normally and then abort when we start to run the tests. >>> The error >>> > > does not come from our tests. >>> > > >>> > > Error: >>> > > ../tests/run_tests_local.sh API_test.py alignmentscan_test.py >>> > > api_response_test.py bridge_test.py caps_test.py client_test.py >>> > > clientif_test.py cmdutils_test.py config_test.py cpu_profile_test.py >>> > > cpuinfo_test.py domcaps_test.py encoding_test.py exception_test.py >>> > > executor_test.py eventfd_test.py fallocate_test.py >>> filecontrol_test.py >>> > > fuser_test.py glob_test.py gluster_cli_test.py >>> > > gluster_exception_test.py glusterTestData.py >>> > > gluster_thinstorage_test.py hooks_test.py hostdev_test.py >>> > > hoststats_test.py hugepages_test.py hwinfo_test.py jobs_test.py >>> > > jsonRpcClient_test.py jsonrpc_test.py loopback_test.py >>> mkimage_test.py >>> > > modprobe.py moduleloader_test.py monkeypatch_test.py mom_test.py >>> > > mompolicy_test.py osinfo_test.py osutils_test.py passwords_test.py >>> > > permutation_test.py protocoldetector_test.py response_test.py >>> > > rngsources_test.py schedule_test.py schemavalidation_test.py >>> > > sigutils_test.py sparsify_test.py stompadapter_test.py >>> > > stompasyncclient_test.py stompasyncdispatcher_test.py stomp_test.py >>> > > sysprep_test.py taskset_test.py testlib_test.py tool_confmeta_test.py >>> > > tool_test.py throttledlog_test.py unicode_test.py utils_test.py >>> > > validate_test.py vdsmapi_test.py vdsmdumpchains_test.py verify.py >>> > > vmapi_test.py vmfakelib_test.py vmTestsData.py zombiereaper_test.py >>> > > network/*_test.py devices/parsing/complex_vm_test.py >>> > > common/cache_test.py common/cmdutils_test.py >>> common/concurrent_test.py >>> > > common/contextlib_test.py common/fileutils_test.py >>> > > common/function_test.py common/hostutils_test.py >>> > > common/libvirtconnection_test.py common/logutils_test.py >>> > > common/network_test.py common/osutils_test.py common/proc_test.py >>> > > common/properties_test.py common/pthread_test.py common/time_test.py >>> > > common/validate_test.py >>> > > >>> > > missing workspace >>> > > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on >>> > > vm0038.workers-phx.ovirt.org >>> > > >>> > > >>> > > Build: >>> > > >>> https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... >> >> > More failures today: > > Error: > sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm(a)tmp/durable-1e9c64d0/jenkins-result.txt.tmp: > No such file or directory > mv: cannot stat '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm(a)tmp/durable-1e9c64d0/jenkins-result.txt.tmp': > No such file or directory > missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm > on vm0009.workers-phx.ovirt.org > > Error: > sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm(a)tmp/durable-dca09b15/jenkins-result.txt.tmp: > No such file or directory > mv: cannot stat '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm(a)tmp/durable-dca09b15/jenkins-result.txt.tmp': > No such file or directory > missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm > on vm0013.workers-phx.ovirt.org > > Build: > > https://jenkins.ovirt.org/blue/organizations/jenkins/vdsm_standard-check-... > New indecent today: sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm(a)tmp/durable-ae6f4bf2/jenkins-result.txt.tmp: No such file or directory mv: cannot stat '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm(a)tmp/durable-ae6f4bf2/jenkins-result.txt.tmp': No such file or directory missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on vm0013.workers-phx.ovirt.org https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... > [VDSM] Tests fail with "missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on vm0038.workers-phx.ovirt.org" > --------------------------------------------------------------------------------------------------------------------------------- > > Key: OVIRT-2630 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2630 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Nir Soffer > Assignee: infra > > I have seen this before, very strange failure. > The job run normally and then abort when we start to run the tests. The error > does not come from our tests. > Error: > ../tests/run_tests_local.sh API_test.py alignmentscan_test.py > api_response_test.py bridge_test.py caps_test.py client_test.py > clientif_test.py cmdutils_test.py config_test.py cpu_profile_test.py > cpuinfo_test.py domcaps_test.py encoding_test.py exception_test.py > executor_test.py eventfd_test.py fallocate_test.py filecontrol_test.py > fuser_test.py glob_test.py gluster_cli_test.py > gluster_exception_test.py glusterTestData.py > gluster_thinstorage_test.py hooks_test.py hostdev_test.py > hoststats_test.py hugepages_test.py hwinfo_test.py jobs_test.py > jsonRpcClient_test.py jsonrpc_test.py loopback_test.py mkimage_test.py > modprobe.py moduleloader_test.py monkeypatch_test.py mom_test.py > mompolicy_test.py osinfo_test.py osutils_test.py passwords_test.py > permutation_test.py protocoldetector_test.py response_test.py > rngsources_test.py schedule_test.py schemavalidation_test.py > sigutils_test.py sparsify_test.py stompadapter_test.py > stompasyncclient_test.py stompasyncdispatcher_test.py stomp_test.py > sysprep_test.py taskset_test.py testlib_test.py tool_confmeta_test.py > tool_test.py throttledlog_test.py unicode_test.py utils_test.py > validate_test.py vdsmapi_test.py vdsmdumpchains_test.py verify.py > vmapi_test.py vmfakelib_test.py vmTestsData.py zombiereaper_test.py > network/*_test.py devices/parsing/complex_vm_test.py > common/cache_test.py common/cmdutils_test.py common/concurrent_test.py > common/contextlib_test.py common/fileutils_test.py > common/function_test.py common/hostutils_test.py > common/libvirtconnection_test.py common/logutils_test.py > common/network_test.py common/osutils_test.py common/proc_test.py > common/properties_test.py common/pthread_test.py common/time_test.py > common/validate_test.py > missing workspace > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on > vm0038.workers-phx.ovirt.org > Build: > https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100096)

5 years, 4 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Infra December 2018